G mobile hotspot

I have notice that the G mobile hotspot is an app on my lg ally.  if i try to connect the lg ally with my laptop using the wireless3g mobile hotspot, is free or do i have to pay, even if i already pay for the unlimited data plan with my cell phone. thanks

There is an additional charge to use the mobile hotspot. I believe it is $20 for 2GB/month + overages. I thought there was also a $30 for 5GB option, though that may have been discontinued.

Similar Messages

  • Connecting c309a to a wireless network, the printer does not find my mobile hotspot connection​.

    I switched to a mobile hotspot w/verizon.  I had set up my computers (2) just fine the first time.  I had to exchange the hotspot. I was told by my computer to insert a flashdrive and transfer my network settings to the printer and other computer.  After inserting the flashdrive into my photosmart c309a printer, it flashed "turn off and on"  I did, then the printer had lost the network settings menu altogether!  I took it to bestbuy to be looked over and was told they were able to get my network menu back but it was still unable to register a wireless connection?? I'm not sure what to do now?

    Sometimes DSL providers have more control over the router than the printer likes.  There is what I believe to be a similar situation here in the states with ATT 2Wire routers.  This is a cut and paste from instructions on how to fix that.  Try it and see if it works.
    - Unplug the telephone line from the router
    - Turn the power off on the router, wait 30 seconds, then turn the power back on.
    - Go through the normal process of connecting the printer to the device.
    - Now find the IP address of the printer (it should be on the self-test printout), type it into a browser.
    - In screen you will find a Networking Tab, then on the left Wireless, then the IPv4 Tab.
    - On this screen you want to set a Manual IP.  You need to set an IP address outside the range that the router automatically sets (called the DHCP range).  If you know what that is, set an IP outside that range but no higher than 255 (the last number in the address).
    - Use 255.255.255.0 for the subnet (unless you know it is different, if so, use that)
    - Use the router's IP address for the gateway and the first DNS (leave the second blank).
    - Finally, plug in the phone line and test.
    Say thanks by clicking "Kudos" "thumbs up" in the post that helped you.
    I am employed by HP

  • Samsung LTE Mobile Hotspot PRO USB cable connection to Mac

    I am trying to connect a Samsung LTE Mobile Hotspot PRO via USB cable to my Macbook and iMac.  I can see it in the System Information, but it does not show up in the Devices in Finder.  Is there a driver that I need?  Does it exist (yet)?

    So I was able to get USB tethering to work, but I still can't connect to the hotspot as a media device (and view what is on my microSD card and/or the device). 
    Here's how I got USB tethering to work: I plugged into my laptop running Linux, where both USB tethering and mounting as a media device work fine, found the Mac OS driver on the device, copied it over to my Macbook, installed, rebooted, wirelessly connected to the hotspot, configured for USB tethering, went to Open Network Preferences..., connected to "SAMSUNG Mobile Device".   I did all this after talking to Samsung on the phone, where they told me the driver does not exist yet....

  • How do I set up devices to access my mobile hotspot once its on?

    How do I set up devices to access my mobile hotspot once its on?

        Great question Bnrybtch019. It's important to have access to all your features, I can help you with that. Since you didn't specific a phone model, these are the steps for a popular Android-Operating Phone http://vz.to/1yrBX0e .
    AdaS_VZW
    Follow us on Twitter at @VZWSupport 

  • "No Internet Access" on connected device with mobile hotspot

    I've been on Verizon for 2 weeks.  Note II on a Family Share Plan with lots of data.  Using the built-in Verizon Mobile Hotspot application.  Connecting from my work laptop, which is Windows 7.
    Set it up and everything worked fine for a week and a half.  I had no problems connecting or accessing the internet from my laptop.  It worked fine Monday morning.  Monday afternoon my laptop started giving me the warning message "No Internet Access" when connecting to the phone's hotspot.  I'm in a 4g area where the hotspot has worked previously.  I've tried several times in several different 4g locations as time allowed over the last 2 days, and I have not been able to get to the internet on my connected laptop again.
    While connected to the mobile hotspot I ran Windows troubleshooter and it tells me that there is no DHCP server available, and that the default gateway for this network is unreachable.  My laptop has no problems reaching the internet via the wireless network at work or at home.  The laptop connects to both of those wireless networks every day (both before and since this problem appeared.)
    I have rebooted both the phone and the laptop, with no change in the problem results.  I renamed the hotspot, and connected to the "new" hotspot from my laptop, with no change in the problem results.  I have tried running "ipconfig /renew" from my laptop while connected, and that is when it tells me that it cannot find a DHCP server for this network.
    What broke?  How can I fix it?
    I'm still in the 100% refund return period on my contract and phones (for another day or so.)  This is an absolute deal-killer.  Hotspot on my phone is the single reason why I switched networks.
    * Revised 2/28:
    This morning I turned on the mobile hotspot feature on my wife's Galaxy S3 (on the same Verizon Family Share Plan.)  Then I connected to it from my laptop.  When it connected it said "limited internet access" for about 30 seconds, and then that warning went away and I had full access.  I surfed for a moment to confirm, and all was working.  I turned off the GS3 hotspot and turned on the hotspot on my Note II.  When I connected to the Note II's hotspot from my laptop I still had no internet access.  I left it for 3-4 minutes, and it never switched on.  I tried surfing and got only error messages in my browser.
    All of this was while sitting at my desk.  So I believe I have ruled out the laptop as a cause for this problem. 
    Thanks in advance,
    Randy

    After I posted the above in February I talked to Verizon support.  They could not resolve the problem.  They replaced the phone, and the new phone has worked for months.  My work schedule changed a bit, and so I started using the hotspot less often.
    Last week I noticed that after I connected my laptop I had a longer delay before it would change from "No Internet Access" to giving me access.  Yesterday morning it was so slow that I got the command prompt up on my laptop and determined that from the laptop's perspective the problem was that there was no DHCP server available through the hotspot network.  That morning it did eventually find the DHCP server and issue my laptop an IP address, and let me connect. 
    Yesterday afternoon the DHCP server never appeared, and I was not able to connect to the internet.  Same thing this morning.  I rebooted both the phone and the laptop.  No change.  The laptop connects to other wireless networks just fine, still.  This worked for months.  Why did it slow down connecting and then stop?  I'm guessing there must be some sort of buffer that has filled up.
    Anyone have any ideas?
    Thanks in advance.

  • Verizon iPhone - mobile hotspot and other questions about the data options

    I just ordered the Verizon iPhone. Can anyone explain the options here:
    1) Unlimited corporate email & Web (business and personal email) vs. Unlimited email and web for smartphones (personal email) - what's the difference?
    2) "3G Mobile Hotspot 2GB" - does this mean that there's no way I can share my 3G connection via wifi without paying the extra $20/month?? How about tethering to a single computer (USB, BT, or WiFi) - does that also require this extra option?
    3) equipment protection - what's the difference between Extended Warranty, Asurion Wireless Phone Protection, and Total Equipment Coverage?
    thanks in advance,
    Mike

    Hi
    Regarding your #2 question; yes, you must pay $20/mo to use the 3G Hotspot aspect of the iPhone, same as with any of Verizon's phones that offer this feature such as the Droid X, HTC phones, etc. And, there is NO additional charge to tether it to your computer; it's $20/mo regardless. You can still use the iPhone's WiFi feature to search the web which is part of the regular data plan. We're only talking about paying the $20/mo for the "up to 5 devices" jumping on your phone as a hot spot.
    I'm an Apple fan, have my MacBook Pro, but my phone is a Droid X. I've been a Verizon member since a year before they became Verizon. Additionally, I am part of the Verizon & Motorola test forum; testing new software updates as they come along.
    Something you should know about Verizon's 3G Hot Spot feature; it has issues. Those of us in the Motorola & HTC forums have experienced identical issues with regard to the 3G Hot Spot feature; it disconnects every 2 minutes, even when you are actively surfing the net. Verizon & Motorola Support have been very helpful to provide what they believe are fixes, including: changing the channel, hard resets, clearing cache, etc. It does not work. Most of us believe, this is NOT a Verizon issue, but a phone maker issue.
    I also have Verizon's MiFi 2200. It costs $59/mo and is purely a hot spot device; again up to 5 devices. I use it at home, for my lap top and for those who need connectivity. It outperforms the 3G hot spot feature of the Motorola & HTC phones by leaps & bounds, and I suspect it will out perform the 3G hot spot feature on the iPhone. Additionally, you get 5GB of download with the MiFi which Verizon is planning on offering increases to 8GB & 10GB. There is NO plan to increase the 2GB download limitation on the 3G Hot spot of the iPhone & other phones, and anyone who does basic software downloads & pics, knows 2GBS is not a lot space.
    So, I would recommend not paying the $20 until this is resolved. If you do, you could pay $39 more for a total of $59/mo for the MiFi, download the software to you home computer & notebook, and end up canceling your home internet service. I did this and have saved $70/mo in my total utilities.
    One other important note: Verizon's VZManager Software for their phones & MiFi. If you did pay the $20/mo for the iPhone and decided to tether to your USB port (for power while using) and you were to use the 3G hot spot feature, it will NOT work on 64 Bit computers, regardless if you are using the WiFi feature or directly using VZManager. The MiFi has this same issue. It will only work on 32 Bit when tethered. So, you'd have to reboot your computer to 32 Bit, if you have that ability. On a Macbook Pro, simply restart holding down the "3" & "2" keys.
    I have no idea why Verizon can't simply upgrade the firmware, even recent firmware upgrades have not resolved this. Most new computers are 64 Bit now.
    Despite this, I use my MiFi 100% untethered and carry my charge cord in my bag as it also works on my Droid, and I presume they may do the same for the iPhone; reduces the need for multiple power cords.
    I really looked forward to the 3G feature of the Motorola & HTC phones, but honestly, it's just not there yet; mine was slower than Dial Up, and I'm not kidding.

  • My mobile hotspot no longer works since I upgraded to mountain lion. What happened and how do I get it back?

    My mobile hotspot (Samsung Note II)  no longer works since I upgraded to mountain lion (running on MacBook Pro)  What happened and how do I get it back? "
    Keep getting error message:
    "Could not join “NAME-HOTSPOT”.
    A connection timeout occurred"
    Please someone help me with this - I do a lot of travelling and use my hotspot! 
    Thanks

    Take each of the following steps that you haven't already tried, until the problem is resolved. Some of these steps are only possible if you have control over the wrieless router.
    Step 1
    Turn Wi-Fi off and back on.
    Step 2
    Restart the router and the computer. Many problems are solved that way.
    Step 3
    Change the name of the wireless network, if applicable, to eliminate any characters other than letters and digits. You do that on your router via its web page, if it's not an Apple device, or via AirPort Utility, if it is an Apple device.
    Step 4
    Run the Network Diagnostics assistant.
    Step 5
    In OS X 10.8.4 or later, run Wireless Diagnostics and fix the issues listed in the Summary, if any.
    Step 6
    Back up all data.
    Launch the Keychain Access application in any of the following ways:
    ☞ Enter the first few letters of its name into a Spotlight search. Select it in the results (it should be at the top.)
    ☞ In the Finder, select Go ▹ Utilities from the menu bar, or press the key combination shift-command-U. The application is in the folder that opens.
    ☞ Open LaunchPad. Click Utilities, then Keychain Access in the icon grid.
    Enter the name of your wireless network in the search box. You should have one or more "AirPort network password" items with that name. Make a note of the name and password, then delete all the items. Quit Keychain Access. Turn Wi-Fi off and then back on. Reconnect to the network.
    Step 7
    You may need to change other settings on the router. See the guidelines linked below:
    Recommended settings for Wi-Fi routers and access points
    Potential sources of interference
    Step 8
    Make a note of all your settings for Wi-Fi in the Network preference pane, then delete the connection from the connection list and recreate it with the same settings. You do this by clicking the plus-sign icon below the connection list, and selecting Wi-Fi as the interface in the sheet that opens. Select Join other network from the Network Name menu, then select your network. Enter the password when prompted and save it in the keychain.
    Step 9
    Reset the System Management Controller (SMC).

  • How do I set up my iphone 5s to use it as a mobile hotspot?

    I recently switched over to the More Everything plan and wish to enable mu iPhone 5s so that it can be used as a mobile hotspot. How do I do this (e.g.. what settings do I need to change on my iPhone). Also: Is it a one-time setup (enable it and then just leave it alone and enabled always) or do I go through the enabling process only for the times when I"ll actually be using the iPhone as a hoy spot?
    Thanks for reading this and any replies.
    Rich

    Hi Richardro,
    We are so excited to hear of your interest in the Personal Hotspot feature! Click here for the instructions to setup the Hotspot on the device. You will only have to setup the device and account once. You may have to turn the personal hotspot off/on when using the feature, per it may stop broadcasting the Wi-fi signal after long period of inactivity.
    Thanks,
    PamelaF_VZW
    Follow us on Twitter @VZWSupport
    If my response answered your question please click the �Correct Answer� button under my response. This ensures others can benefit from our conversation. Thanks in advance for your help with this!!

  • Droid Razr 4G Mobile Hotspot Issues with PS3

    I am hoping someone else had this issue and has been able to resolve.  I just got a Droid Razr this week, and I have the 4G mobile hotspot feature.  I am trying to replace my slow DSL line at home, and most things in my house have tested fine (Internet access, etc.).  However, my PS3 seems to have some issues, particularly with online gaming and testing the network connection.  The game I am testing now is COD MW3.  I thought maybe something like IP ports were blocked on the phone or 4G network, but searching online seems to indicate that isn't an issue.  If I reconnect my PS3 back to the DSL, online gaming and network tests work just fine.  Move it back to 4G and the game won't connect and the network tests don't complete.  
    I don't see any features on the phone that would indicate that you can modify any firewall like settings.  Anyone else experience similar issues?  Thanks in advance!

    I'm having the same issue with my Samsung 4g hotspot as well.  I can get onto the PSN, download game updates just fine, but when I'm in a MW3 lobby, it just sits there and eventually times out and a XMB message displays that i've been disconnect from the wireless access point.  Anyone have any ideas? 

  • Mobile Hotspot option missing on new software for Win 8.1

    On my Thinkpad X230, there used to be an option Mobile Hotspot in Lenovo Settings on Windows 8. After the update to 8.1 and the following Lenovo updates, this feature is gone, or hiding elsewhere. Where is it?

    Hi,
    Welcome to Lenovo Community Forums!
    Windows 8.1 comes with a built in mobile hotspot feature.
    The Mobile Hotspot feature has been removed from Lenovo Settings because it conflicted with the Windows 8.1 built-in feature. Once these conflicts are resolved, the new Lenovo settings redesigned with mobile hotspot feature will be available. But we cannot assure when it is expected to release.
    Best regards,
    Mithun.
    Did someone help you today? Press the star on the left to thank them with a Kudo!
    If you find a post helpful and it answers your question, please mark it as an "Accepted Solution"! This will help the rest of the Community with similar issues identify the verified solution and benefit from it.
    Follow @LenovoForums on Twitter!

  • Does ePrint work with mobile hotspot service?

    I have a relatively new HP Officejet Pro 8500a E-All-In-One printer. I use the printer with a USB connection to my laptop, but also with a WiFi connection to my tablet through the mobile hotspot service of my HTC Thunderbolt phone. Until recently, I used this service with an iPad, which worked fine using AirPrint. One thing I noticed early on was that while the printer was seen by the other devices connected to my mobile hotspot, the printer was unable to set up the ePrint service, always giving me the error that it was unable to find an internet connection. All of my other devices are connected to the internet via the hotspot with no special settings created or used. Now that I've switched to using an Android 3.0 tablet, I need to get the ePrint feature working in order to print from my tablet--but I just keep getting the same error: "The Printer was unable to connect to the server. You can connect the printer to the internet through a proxy server..." Am I doing something wrong? The printer is set up using the WiFi signal from the mobile hotspot, and other devices on the hotspot can see the printer...
    Thanks,
    Did

    Hey technobabble1! I've never tried to set this up personally but I think it would work. Try viewing the ePrint troubleshooting information found here and see if it helps at all. If not, let me know what happened and I will try to find out more information for you.
    If I have solved your issue, please feel free to provide kudos and make sure you mark this thread as solution provided!
    Although I work for HP, my posts and replies are my own opinion and not those of HP.

  • I am unable to connect my mobile hotspot as wifi for ipad - Always dismiss

    I am unable to connect my blackberry mobile hotspot as wifi for ipad  but during connecting message comes as dismiss

    What router are you using? make/model/version
    What security type are you using? If it is WEP then symbolic (non hex) keys may be converted to hex in different ways by different operating systems. Is your laptop a Windows PC?
    If you are using WEP then drop it and move to WPA2. WEP has been deprecated by the WiFi alliance since 2004 as insecure (it can be hacked in seconds).

  • Having issues with MacBook Pro and Verizon Mobile Hotspot

    Hey everyone,
    I bought a MacBook Pro with the Lion OS. I recently switched to Verizon and got an HTC Thunderbolt so I could use it as a hotspot at home and when I travel.
    The problem I am having is when I turn the Mobile Hotspot on is, it will connect and stay connected for anywhere from 2 to 10 minutes and then it will work intermittently after that until I turn it off. I've talked to Verizon Tech Support probably 30 times in the last 3 months about the issue. They sent me another SIM card and a new Thunderbolt at first. The issue did not go away, so they offered me a Samsung Charge. Got it and it did the same thing. So I told them to send me back a Thunderbolt, because its a better phone and the Charge was too glitchy.
    I've been to the Apple Store twice now and they dont know why its happening either. The only thing that has remained constant throughout this whole troubleshooting process has been my MacBook Pro. My questions are: Is anyone else experiencing this type of behavior? and What could possibly be causing this issue?
    Im a new Mac user, so Im not sure how to troubleshoot issues like this, or if there are compatibility issues Im not aware of.
    Thanks for your help,
    Matt

    Hi Matt,
    Did this ever get resolved for you? I have the exact same problem except I'm running Snow Leopard on a MacBook and my phone is a Droid Incredible 2. When I use the hopstpot from a ThinkPad running Windows 7 or a System76 netbook running Linux Mint it works perfectly. But when I try to use my MacBook it connects for, like you said, anywhere between 3-10 minutes and then connection is intermittent and super slow. I haven't gone through the motions of contacting Verizon yet...
    Thanks,
    Aileen

  • IP Address Conflict Using Mobile Hotspot On Iphone 5

    Hello,
      I just got my new Iphone 5 and I love it, apart from one little problem.  Now when I connect it to my laptop using the mobile hotspot (either via usb or wireless) I am constantly getting a network error popup stating that there is an ip address conflict.
    Hardware info:
    Iphone 5 16gb
    Asus G74S Laptop with Windows 7 64bit
    Error info:
    The error popup is in the form of a small window titled Network Error.  It states "Windows has detected an IP address conflict"  "Another computer on this network has the same IP address as this computer... blah blah blah"
    The windows system event viewer has the following log:
    Source is Tcpip
    The system detected an address conflict for IP address :: with the system having network hardware address 00-00-00-00-00-00. Network operations on this system may be disrupted as a result.
    The event ID is 4199
    Done so far:
    Already did every single troubleshooting step in regards to ip address conflicts, ipconfig /release and /renew, flush dns etc.  I even did an entire system restore on my laptop back to factory settings.  Installed a fresh Itunes 10.7 64bit and reconnected my new Iphone 5 and am still getting this message. I never had this problem with my Iphone 4.
    Called Apple tech support, they ran me through all the steps relating to the phone itself, reseting network settings, resetting factory settings, removing and re-inserting the sim card, you name it.
    Disabled IPv6 in the registry and reboot, still the same popup occurs.
    Tried to assign a static IP address to Ipv4, still the same popup
    Any ideas?

    Still having the same issue....Is there another thread in which this is resolved?  Iphone 5, IOS 6.  It's just the phone tethered to a laptop (have tried with two laptops, both get the ip address conflict error, so the problem resides in the phone).  No other devices are on the network.  Was this ever addressed? 
    We use the iphone 5 as a mobile hotspot for our business, which is completely internet/skype based, and we need to be mobile.  Mifi keeps kicking off the connection, so they are not an option.  Thank you.

  • Mobile Hotspot not working after upgrading to 4.4.2

    My husband and I have identical Motorola phones. He let his upgrade to Android 4.4.2 over a month ago. Since then, his Mobile Hotspot cannot be used to connect to our home PC. If you use your mobile hotspot, DO NOT LET IT UPGRADE!!!!!!!!
    Three visits to local Verizon store, more than 50 power-off's (many of them soft boots), a long phone call to Verizon support. Still not working. Except once two weeks ago for several hours, then failed again. About a week ago,our HP laptop started connecting to the Hotspot, but the desktop cannot. My hotspot (which is fortunately still running 4.1.2) provides internet access just fine. Strange new symptom last week: once the laptop has connected to the 4.4.2 Hotspot, the desktop can as well. Sigh. Verizon offered to replace his phone under warranty, but the new one is expected to arrive with the latest version. I am not optimistic about that. Others must be having the same problem. Perhaps not as desperate as us because it is our only internet service at our rural home. We are still paying full price for our plan, but do not have the service. And, we have spent literally a hundred hours trying to debug this. Come on, Verizon, this needs to be fixed!

    RAZR M
    Just tried another soft boot. Same behavior.
    Thank you for responding.
    Sent from my Verizon Wireless 4G LTE DROID

  • Mobile Hotspot not working after upgrading to official version OS10.3.1.1​​565

    Dear Support,
    I am facing the issue with my device Q10 when i have upgraded the version to OS 10.3.1.1565.
    The mobile plan is 6 Gb so no issues from this side.
    Please we need a solution for this problem, it was working fine bfore the update.
    Thank You,
    Wissam

    There is already a very big thread up for the same issue. Please respond there with your issues relating to your Q10 and your Mobile Hotspot issue with 10.3.1.1565
    http://supportforums.blackberry.com/t5/BlackBerry-10-OS-Device-Software/hotspot-issue-after-10-3-1-1...

Maybe you are looking for

  • (SOLVED) problem with dbus and pacman

    For whatever silly reason, I did a 'pacman -S dbus' to make sure I had it installed and the result has really screwed up dbus. Although pacman reads it as installed, other programs don't and I can't start anything that relies on dbus (like thunar for

  • Idoc help

    Hi guys, I currently have a program which takes in an input file (text) and then uses the following BAPIs to either change a Purchase Order or to do a Goods Movement:- BAPI_PO_CHANGE BAPI_GOODSMVT_CREATE I know want to change this functionality to us

  • Health Service Heartbeat Failure Alert for Generated when one Management Server Down,

    Hi, I have Two Management Server, every one manage about 100 server, when one Management Server goes down unexpected, I receive 100 Alert for 100 Server Health Service Heartbeat Failure. My Question, why when the Management Server down, it send that

  • OracleCommand + multiple query

    I'm making some backup scripts using dbms_metadata.get_dll and and let's say i have a result like that ([...] - i've cut some info, cause it's long): CREATE TABLESPACE "TEST" DATAFILE 'E:\ORACLEXE\ORADATA\TEST.DBF' SIZE [...] CREATE TABLE "SYSTEM"."O

  • Xfce4 Groups Not in the Package Directory Search?

    This is probably a stupid question, but how are people supposed to know that they can do things like: # pacman -S xfce4 # pacman -S xfce4-goodies when neither of those two groups show up in the Package Directory Search?  I'm installing Arch for the f