G2 in recovery mode, not recognized by itunes.

My iPod Touch 2nd generation wasn't being recognized by itunes. I was getting this error:
and so I put it into recovery mode, now it is sitting on the table plugged into iTunes, still not being recognized. What do? I already tried the msconfig thing. I am on Windows 7.

Try placing the iPod in DFU mode and then restore.
Next try another computer
Last make an appointment at the Genius Bar of an Apple store.
Apple Retail Store - Genius Bar

Similar Messages

  • IPod Help needed from serious Apple gurus - iPod Touch 2g 16g stuck in restart loop. Will NOT enter DFU or recovery mode, NOT recognized by iTunes on Windows or Mac

    Ok, so here's the not so sad story. I bought an iPod Touch 2g 16g through Ebay - so forget warranties. Luckily I did not pay much. The description said it was stuck on the apple logo, so I figured it would be an easy put into recovery mode and restore problem.
    Not so much.
    If you plug the iPod in and charge up the battery the LCD will come to life after a while with the apple logo, then it displays the spinning wheel with the apple logo over it. That will last anywhere from 10 - 15 minutes, then the iPod will go blank for a few secs and then start up the cycle all over again.
    As stated, this iPod will NOT enter either DFU or recovery mode and believe me I've tried it several times several different ways with different timings, connected via USB to a Mac, connected to a different Mac running Windows, and connected to just the charger. Nothing. Occasionally the screen might go blank while holding the power and home buttons but nothing else happens and then it starts it's usual cycle again.
    Again, iPod NOT recognized by iTunes on either Mac or Windows side. Since I got off Ebay and seller didn't know much about it, I have no idea if someone tried to jailbreak this or not.
    I will not put much money into this machine. So I guess my question is: does this behavior mean that the motherboard is clearly fried? Are there any software programs that might diagnose what the problem is? Could it be as simple as a fried battery?
    And most importantly, is this iPod simply toast or is there anything anyone can suggest????
    Really any suggestions would be greatly greatly appreciated. Seems a shame to just trash an iPod touch that might need a simple fix...
    If it helps matters, I can tinker with iPods somewhat and have torn down and replaced several iPod touch 1g and 2g glass and digitizers with no problems. I'm somewhat software savvy but the whole jailbreak thing is new territory... and I can't really figure out the command in Windows or Mac terminals to list all connected devices so I have no idea if the computer even knows the iPod is there, even if iTunes doesn't. Guess that's it... ummm, please help???

    Nothing huh? No one's had this problem or this isn't fixable... oh well... if anybody comes up with anything I'll check in occasionally...

  • Recovery Mode not recognized by Itunes PLZ HELP!

    My IPhone 5S is in recovery mode but will not be recognized by Itunes? Any suggestion,  i cannot simply reset my phone because i put it into Recovery because it was not restoring, the bar didnt move and hasnt moved at all for the past 2:30 hours. It was not being recognised by Itunes in the first place, then on i tried to reset it to factory default which did not work and was stuck. when i try to restart it just goes back to the loading bar which does not move at all. So i put to factory default and would not be recognised by itunes again, i have tried
    1) uninstalling and Reinstalling itunes and apple support
    2) Yelling at it with frustration in hopes it would  work (Which obviously wouldnt work)
    3) Restarting the Apple mobile support in the services of the windows pc and checking for updates for the itunes application
    4) Updating the drivers for the IPhone in recovery mode but would not find any drivers to update with.
    PLEASE HELP if i broke this phone my parents will KILL me. But i'm sure at least one person in the community would have a solution for my problem.
    Please help me, my phone is my life! :O

    Try placing the iPod in DFU mode and then restore.
    Next try another computer
    Last make an appointment at the Genius Bar of an Apple store.
    Apple Retail Store - Genius Bar

  • Ipad in recovery mode not recognized by PC or Itunes

    Hi All,
    I have a Ipad 1 that's stuck in recovery mode ( usb wireplug with itunes logo on top ), the really bad thing is that it's not recognized by and PC or any Itunes I tried, so there is no way to kick it out of the Recovery... When connected to the wallplug to charge it doesn't do anything, screen stays black. I tried all the obvious thins allready, holding down the home and powerbutton for 10 seconds etc etc, tried to find it in the device explorer on the pc ( It doesn't even register as a camera or harddisc in my computer ), It just loops into the recoverymode everytime I try any of the well known methods... Anyone have a better suggestion for me, maybe even the solution? Thanks in advance!!
    greets
    Baksi

    1. Turn off iPad. Press and hold the Sleep/Wake button for a few seconds until the red slider appears, slide to turn off.
    2. Connect USB cable to computer
    3. Press and hold the Home button down and connect the docking end of cable to iPad
    4. Continue holding the Home button until you see the "Connect To iTune" screen
    5. Release the Home button
    6. Open iTune (make sure you have the newest version of iTune)
    7. You should see "iTunes has detected an iPad in recovery mode"
    8. Use iTune to restore iPad
    Note: You need to be patient and repeat the above many times to recover your iPad

  • IPhone 5s recovery mode not working AND itunes wont connect phone!

    I opened iTunes whilst my phone was plugged into my pc via USB and was told to update the software so I did.
    During the process of updating I noticed my phone screen was an image of a usb pointing to an itunes icon.
    I researched what the symbol meant and why i couldnt turn my phone back on and found out i need to do the recovery instructions.
    THEY ARE NOT WORKING.
    I have tried many times but iTunes is still not noticing that my iphone5s is plugged in.
    PLEASE HELP ME!
    Thanks.

    Hello bekahxi,
    Thank you for using Apple Support Communities.
    For more information, take a look at:
    iOS: Device not recognized in iTunes for Windows
    http://support.apple.com/kb/TS1538
    Removing and reinstalling iTunes and other software components for Windows Vista, Windows 7, or Windows 8
    http://support.apple.com/kb/HT1923
    Have a nice day,
    Mario

  • Iphone 5c in recovery mode not recognized by windows 8

    Hey there. I'm having a LOT of trouble with my iPhone (5c) and I could use some expert help. A couple of days ago a vertical black line appeared on the right side of my screen. I hadn't dropped it or damaged it in any way, so I was a bit puzzled by it. A friend at work suggested I restored to factory settings to see if that helped (I didn't think it would, but what would be the harm to try?). Everything else was working just fine. Midway through the restore, iTunes says it can't finish because it can't detect my iPhone any longer. Meanwhile, my iPhone is now displaying the "connect to iTunes image". But now, when I plug it in, Windows does not recognise it. Tried with two different PCs, neither is working.
    I'm currently on a Windows 8.1 PC and using iOS 8.1.1 on my phone. I tried all the stuff on iPhone, iPad, or iPod touch not recognized in iTunes for Windows - Apple Support, but there's no way. Can anyone please help me out with this?

    Thanks for the help TJBUSMC1973. I followed the instructions on the microsoft site and when I plugged in the iPhone iTunes did recognize it. However, midway through the restore, it again disconnected somehow and iTunes could not complete the restore (error code number 9). At that moment, the image on the iPhone screen had changed from "connect to iTunes" to "updating" (apple logo with the progress bar below it). Now I'm back at square one.        

  • TS1538 Ipod Touch stuck in DFU mode, not recognized in itunes after 1602 error restoring.

    I've tried all of the: Hold Power button and Home items. It's plugged into the computer, screen is black. Windows sees the apple mobile device driver under devices and hardware. The driver's properties says it's in DFU mode. It was constatnly stuck in Recovery mode showing the CD+music note icon and the 30-pin connector image. Connecting the ipod to the computer, windows makes the connection sound but itunes does not open. Opening itunes, ipod is not recognized.
    It's a gen 1 touch, version 2.? firmware, I think.

    Try:
    - iOS: Not responding or does not turn on
    - Also try DFU mode after try recovery mode
    How to put iPod touch / iPhone into DFU mode « Karthik's scribblings
    - If not successful and you can't fully turn the iOS device fully off, let the battery fully drain. After charging for an least an hour try the above again.
    - Try on another computer
    - If still not successful that usually indicates a hardware problem and an appointment at the Genius Bar of an Apple store is in order.
    Apple Retail Store - Genius Bar       
    also:
    Error 1604
    This error is often related to USB timing. Try changing USB ports, using a different dock connector to USB cable, and other available USB troubleshooting steps (troubleshooting USB connections. If you are using a dock, bypass it and connect directly to the white Apple USB dock connector cable. If the issue persists on a known-good computer, the device may need service.
    If the issue is not resolved by USB isolation troubleshooting, and another computer is not available, try these steps to resolve the issue:
    Connect the device to iTunes, confirm that the device is in Recovery Mode. If it's not in Recovery Mode,put it into Recovery Mode.
    Restore and wait for the error.
    When prompted, click OK.
    Close and reopen iTunes while the device remains connected.
    The device should now be recognized in Recovery Mode again.
    Try to restore again.
    If the steps above do not resolve the issue, try restoring using a known-good USB cable, computer, and network connection.
    Error 1600, 1601, 1602
    Follow the steps listed above for Error 1604. This error may also be resolved by disabling, deactivating, or uninstalling third-party security, antivirus, and firewall software. See steps in this article for details on troubleshooting security software.

  • Ipod 5th Gen Video 80Gb disk mode not recognized on itunes

    Hi there everyone,
    So i have my ipod 5th gen 80GB video and here's my problem.
    Time ago i had it in a pocket of my backpack that was supposed to be waterproof. We got completely washed in NYC and when i took it out of my backpack pocket the ipod was dead or behaving in a weird way.
    It didn't turn on then i let it dry. After weeks i've been trying to charge it but it seems it had battery problems so i bought a new one and replaced.
    Now the ipod stays on but it keeps restarting showing me the sad face. Then it restarts beginning fgrom the apple logo and the same thing comes up.
    I can put it in disk mode and also in the diagnostic mode thru the key combination.
    I let it sit for 24 hours more or less to the wall charger and the battery seems to be completely full and the ipod stays on, still fiving me the same synthoms. Then i put it in disk mode while downloading the last version of itunes (9). When i plug it in, i hear the sound that windows makes when you plug something via usb. It installs the software and it sees it as an ipod device. But itunes WON'T.
    This appens with every usb port that i have. I can put it in disk mode even plugged into the computer, i hear the windows sound like i just plugged something in but nothing.
    When i reset the ipod, sometimes i see the screen that tells me to connect the ipod to itunes and procede to the restore.
    Sometimes i see the big V and the "ok to disconnect". The if i plug it in with itunes open on my desktop i see the "do not disconnect" but nothing happens, it will not see it yet.
    After 30 secs more or less, the ipod restarts again on its own showing me the sad face.
    If i turn it off it tells me "very low battery" but i don't know if this last one statement its important or not.
    I know already that all of my music and videos are gone. I just would like to get to the restore step then i'll start over again loading music and videos.
    What kind of problem do you think it has? Is there another hardware component damaged that needs to be replaced?
    Is there a solution for this kind of issue?
    Of course i've been following ALL the apple instructions on the website, the 5 R's and so on but nothing worked.
    I really hope that someone in here could give me an hint because at this point i really don't know where to crush my head
    Thank you so much for your time!

    I'm having the same exact problem. When I first started using Vista it was fine, but now all of the sudden it will do nothing with My iPod and it kind of angers me.
    Compaq Presario   Windows Vista  

  • Ipod in recovery mode is not recognized by itunes

    My Ipod has entered recovery mode, but it is not recognized by itunes.
    It has the recovery mode screen with the Itunes logo and all, but even when I disconnect it, shut it down, hold the home button and connect it again, Itunes won't recognize it (I have already tried with two different computers, PC and MAC).
    Any ideas?
    Thanks.

    - Have you tried another cable?
    - I would try placing the iod in DFU mode.
    How to put iPod touch / iPhone into DFU mode « Karthik's scribblings

  • IPhone 5 stuck in recovery mode. Not recognized in iTunes for Windows

    Hi,
    My iphone 5 stuck during update to 8.2. It is now frozen in recovery mode, showing a 'connect to itunes' screen. The problem I have is that (the recently upgraded to 12.0.1) itunes is not recognizing my device. I have tried all of the suggestions here: iPhone, iPad, or iPod touch not recognized in iTunes for Windows, to no avail. I have not removed iTunes and reinstalled to test that, as I am concerned this will destroy the backups of my phone - which I will now desperately need once the phone is recovered.
    Has anyone got any suggestions?
    Cheers

    Hi AmberX92,
    If you receive an error 3194 when attempting to restore your iPhone, I would suggest that you troubleshoot using the steps in this article - 
    Error 3194, Error 17, or "This device isn't eligible for the requested build"
    Thanks for using Apple Support Communities.
    Best,
    Brett L 

  • IPad not recognized by itunes or my PC...stuck in recovery mode

    Wow... what a mess.
    I inherited a first gen iPad last week... wanted to wipe it clean and start fresh.  Restored and erased all content... and now it's stuck in recovery mode.   It's not recognized in iTunes or at all by my PC.   When I plug it in... nothing at all.  Looked in my device manager for it to show up... nothing.   Tried restaring it, putting it into DFU mode, plugging it into different usb ports, different usb cables, reinstalling itunes, trying it on multiple different computers, and pretty much every how to help article I could find on the web.
    HELP!    There must be some way to kick this thing back to life.   It's fully charged, was treated well before I had it, and practically new.
    HELP!  Please.

    did you try all those steps:
    Disconnect the device from the computer.
    Save a screenshot by pressing the Home button and the Wake/Sleep button at the same time (the screen should flash briefly). Note: Taking screenshots and saving images on iPod touch requires iOS version 2.0 or later.
    Reconnect the device to the computer.
    Open the Device Manager in Windows as follows:
    Windows XP: Click Start > Run. In the resulting dialog type devmgmt.msc and press Return on the keyboard.
    Windows Vista or Windows 7: Click Start. In the dialog, type devmgmt.msc and press Return on the keyboard. If Windows needs your permission to continue, click "Continue".
    Expand all the sections labeled below (not all sections may be listed):
    Imaging Devices
    Other Devices
    Portable Devices
    Universal Serial Bus Controllers
    Look for the entry that recognizes the device as a camera. This entry should be called Apple iPhone,Apple iPad, or Apple iPod.

  • TS1538 Ipod is stuck in recovery mode, and not recognized by iTunes. Tried all of the recommended resets and combinations mentioned, but the ipod is still not recognized.  Genius said it may be a hardware error, but all of the buttons and cords work. Now

    iPod is stuck in recovery mode, and not recognized by iTunes.
    Tried all of the recommended resets and combinations mentioned, but the ipod is still not recognized.  Genius at apple said it may be a hardware error, "The button is broke" but all of the buttons and cords work and i proved it to him. He then said he doesnt know, ma Now what?

    If it does not work on other computers then I agree with the Genius

  • Ipod classic 120 stuck in disk mode, not recognized by windows or itunes

    so ive been havin tons of problems with my new ipod 120 classic
    first one day when i plugged it in it told me it was corrupted and needed to be restored
    then it would not restore
    i formated it with windows but that didnt seem to do anything
    the other night somehow i got it to the point of naming my ipod but after that, it stopped working again
    for a while i couldnt even put it into disk mode
    now, when it is plugged into the computer it is stuck in disk mode, yet not recognized by the computer or itunes
    it makes the sound when i plug it in but never shows up
    also, when its not plugged in, it starts up and just brings me to a screen that says use itunes to restore. but then i plug it in and it goes right to disk mode and do not connect, and isnt recognized
    when i unplug it i can see it pop up on my computer for that one second i unplug it
    ive tried this on a number of computers and it does the same thing
    when i unplug it from being plugged into the computer it just sits in diskmode saying ok to connect
    if i reset it by pressing center and menu, it just goes back to the use itunes to restore screen
    i cant get it to enter diagnostic mode, and when i hit center and play after center and menu it does nothing either
    ive just about had it with ipods
    this is my 3rd or 4th classic that i have had problems with
    apple should be ashamed of themselves for such a buggy product for so much money, and very very crappy service
    any help greatly appreciated....but im prety sure ill be moving onto another product after this
    luckily i am still under warranty so they offered for me to send it in....but then i am without music for about a week
    i feel i should be compensated for that alone, aside from just fixing it for me
    please help me fix this so i can get back to some tunes!
    thanks for any info

    1. Turn off iPad. Press and hold the Sleep/Wake button for a few seconds until the red slider appears, slide to turn off.
    2. Connect USB cable to computer
    3. Press and hold the Home button down and connect the docking end of cable to iPad
    4. Continue holding the Home button until you see the "Connect To iTune" screen
    5. Release the Home button
    6. Open iTune (make sure you have the newest version of iTune)
    7. You should see "iTunes has detected an iPad in recovery mode"
    8. Use iTune to restore iPad
    Note: You need to be patient and repeat the above many times to recover your iPad

  • Iphone 4 is not recognized by itunes and is only on emergency mode, keeps telling me to connect to itunes but when I connect iphone to computer it does not recognize it

    iphone 4 is not recognized by itunes and is only on emergency mode, keeps telling me to connect to itunes but when I connect iphone to computer it does not recognize it

    Did you try recovery mode?  Hold down the home button as you connect it to iTunes.  iTunes should pop up a window that says "iTunes has detected a device in recovery mode" and give you the option to restore.

  • My ipod touch 5th gen will not connect to itunes, but my computer registers my ipod. i have tried placing my ipod in recovery mode, uninstalled and reinstalled itunes, and restarted my laptop but my ipod will not connect to my itunes..... help ._.

    My ipod touch 5th gen will not connect to itunes, but my computer registers my ipod. i have tried placing my ipod in recovery mode, uninstalled and reinstalled itunes, and restarted my laptop but my ipod will not connect to my itunes..... help ._.

    Try
    iOS: Device not recognized in iTunes for Windows
    I would start with              
    Removing and Reinstalling iTunes, QuickTime, and other software components for Windows XP
    or              
    Removing and reinstalling iTunes and other software components for Windows Vista, Windows 7, or Windows 8
    Before you reinstall the Apple software, also remove iCloud vi Control Panel Remove programs. The reinstall the Apple programs
    New cable and different USB port?
    Runs this and see if the results help with determine the cause
    iTunes for Windows: Device Sync Tests
    Try on another computer to help determine if computer or iPod problem

Maybe you are looking for

  • EXPORT IMPORT PROBLEM IN APEX 3.2

    Hai all, i have developed my application in apex 3.2 with oracle XE as backend .when i export and import into the customer server in some of the pages, html header java script contents( my validations and calculations ) not imported properly. ie part

  • Creation of activity

    Hello Guys,    Am using the following code  to create an activity,but am not successful in creating an activity.    Though sy-subrc is resulting in zero and activity is not getting created.  Please suggest: CALL FUNCTION 'CRM_GUID_CREATE'        IMPO

  • Problem creating database during installation Oracle 8i

    Hi! When I was installing Oracle 8i a problem appeared. This problem was about Database creation, when the program of the Oracle installation was creating the database an error message was appeared : ORA-01034:ORACLE NOT AVAILABLE. I aborted the crea

  • What host credentials must be given in local Instance ?

    Hi i have a 10g DB on my local system on Windows XP SP2. We have exchange.com domain in our comoany I am able to start EM, but cannot perform recovery unless i enter host credentials. I entered my username on exchange and the password but it doesn't

  • Tried to use iTunes library from Windows and Mac - lost everything

    My iTunes Library is on a NAS (Dlink DNS-323) and until last night, I was only using it with my two macs (both running 10.5.6). Last night, I wanted to use it from my Vista laptop so I looked up online and realized I can easily do it by renaming the