G2TiVX Pro-VT

Good evening, i have a G2TiVX Pro-VT 64 mb graphics card on a Gigabyte GA-7VA motherboard with 512 mb of ram, cpu is a Athlon xp 1900+.
My problem is with the latest driver, if I update to the latest drivers my TV-Out doesn't work anymore, all i get is a black screen but if i reinstall the original driver that came with the card it works fine. I watch a lot of movies from my computer to the tv and now, specially with the newer games, I can't play them because its asking me to update my driver. Anyone????
Thx.

Hi,
I have two of these cards
I have the same problem
same thing under windows AND linux
same thing with all 4 motherboards I tried
Biostar M7VIG Pro and M7VIG 400
MSI KT3V and K7N2
tried 4 different sticks of ram , PSU , everything
in linux I tried the driver 6111 and 6629 (both recent)
in windows I tried the 53.03
in all cases I have very reliably reproduced the problem
when using the TV-OUT (composite OR s-video) when the video initialise I get a black screen with a thin dark grey border (bios , console , dos , bootscreen and vesa all work fine in TV-out mode)
when there is this black screen problem , the rest of the system is fine , as far as the system is concerned , the video is being displayed (and it probably is being generated in memory , probably that the RAMDAC isn't reading the right address , and getting all 0s instead of the actual image)
the original threads where I posted about this problem are
MSI G2TiVX Pro-VT TV-out black screen (w/ linux) (fine with crt ,no hanging) very detailed prob.
http://www.nvnews.net/vbulletin/showindex.php?t=40614&highlight=g2tivx
I also emailed [email protected] about this , I doubt they will answer however

Similar Messages

G2TiVX Pro-VT(MS-8836) Video-In S-Video how many pins?

G2TiVX Pro-VT(MS-8836) How many pins is the S-video connector for the Video-In? Thanx :D

mcfoo,
It should be a standard S-Video Connector.
Take Care,
Richard

Video decompressing

Hi! :D I can`t decompress video while capturing video
with msi G2TiVX Pro-VT / G2Ti Pro-VT (MS-8836)
videocard. I`m using videoprogramms for videochats.
They decompress video and after that compress and send it.
There is no such a problem when I`m using windows XP.
Does msi videocard compress captured video in mpeg2 or other
formats?
How can I find and install codecs for solving problem?

After Effects and added some effects and color correction, the final clip got out 392GB, although I chose the uncompressed settings and although I added effects. Normally it should be more than 578 GB.
The default QT output uses the Animation CoDec, which is a visually lossless compression. No problem here and I think you are overdoing. There is nothing wrong with converting files e.g. to LZW compressed TIFFs, PNG or EXR files, all formats producing much smaller file sizes than QT files and without losing any info...
Mylenium

How do I add multiple family members to eprint capability on my 8600 pro?

I dont know how to add my wife and son to the eprint capability on my 8600 pro, i tried adding them as seperate users under hp connected but it wont let you use the claim code more than once. Anyone have any ideas? I'm sure someone has done this before, any help would be greatly appreciated...Thanks in advance

Hi AV55,
I think you misunderstood banhien's earlier post. Your wife would need to log into her ePrintCenter/HP Connected account and then add each family member as an authorized sender following the steps banhien posted.
Regards,
Happytohelp01
Please click on the Thumbs Up on the right to say “Thanks” for helping!
Please click “Accept as Solution ” on the post that solves your issue to help others find the solution.
I work on behalf of HP

My mac's software is only available under my profile on MacBook pro. How can other family members get to the optional SW logged in under their own profile

Is there a way to share purchased SW under mote than one profile on the MacBook pro?
Thanks

If the software is in the HD>Applications folder it's available to everyone. If for some reason you put software into User>Applications folder it will be available only to that user.

Install Windows 8.1 Pro on Mac Mini Late 2014

I'm trying to install Bootcamp on my Mac Mini. Windows reports that it cannot install or create a partition on the drive after formatting the BOOTCAMP partition as NTFS.
This is my setup:
1. Mac Mini Late 2014 with 2TB Fusion Drive.
2. Windows 8.1 Pro x64 full version ISO downloaded from Microsoft Store.
3. Sandisk Extreme Flash Drive (I have tried both 16GB and 64GB).
4. Bootcamp partition = 500GB.
5. Other USB devices plugged in: Corded USB Mouse and Apple Extended Keyboard (both of which are required to enter the serial number and navigate the installer window).
6. No additional storage devices of any kind are connected aside from the internal Fusion drive and the installer drive.
7. Booting from the EFI portion of the Bootcamp created Windows installer.
I have read that I should try using a USB 2 flash drive rather than a USB 3 flash drive, so I will try that next. I fail to understand how this could make any difference.
If you have any other tips, please let me know.
I have installed or helped other people install bootcamp many times over the course of the past 2 years. Every single time it has caused endless headaches and literally weeks of wasted time.
I have read endless posts on what is causing these problems. I will consider summarising these for anyone else having the same problems. Everyone has their theory so far about this Bootcamp nightmare, but so far there doesn't appear to be any one magic solution.
Apple's inability to address the issue suggests that the problem may be with the Windows installer. Perhaps Microsoft is deliberately causing this?
I suspect the two most likely causes of these issues are the downloaded ISO or the Thumb Drive.
If you have any better idea, please let me know.
On another topic, how to I rename the NTFS partition back to BOOTCAMP? All options to rename this partition are greyed out in Disk Utility...
Cheers,
Paul

Paul@Sydney wrote:
7. Booting from the EFI portion of the Bootcamp created Windows installer.
The FAT32/NTFS partition is usually not adequate for an EFI install. You can delete the BCA-created partition and create a Disk Utility partition which is formatted as Free Space. This will be split into an MSR and MSD. Fusion drives create problems, especially if the BC partition lies outside the traditional MBR 2TB boundary.
Before you delete the BCA-created partition, please post the output of
diskutil list
diskutil cs list
sudo gpt -vv -r show /dev/disk0
sudo gpt -vv -r show /dev/disk1
I have read that I should try using a USB 2 flash drive rather than a USB 3 flash drive, so I will try that next. I fail to understand how this could make any difference.
Windows installers up to W8.1 do not have USB3 drivers. These are installed after Windows is installed and BC drivers are in place.
Apple's inability to address the issue suggests that the problem may be with the Windows installer. Perhaps Microsoft is deliberately causing this?
The requirements are pretty strict when installing Windows. Any deviations cause headaches and grief.
I suspect the two most likely causes of these issues are the downloaded ISO or the Thumb Drive.
The USB is usually the issue.
On another topic, how to I rename the NTFS partition back to BOOTCAMP? All options to rename this partition are greyed out in Disk Utility...
After Windows is fully installed and BC drivers are in place, log into Windows, right click on it and rename it on the Windows side. It cannot be renamed on the OSX side with diskutil renameVolume. Here is an example sequence. You cannot rename volume during the installation process.

Adobe Photoshop CS2 in Macbook Pro

During installation of Adobe Photoshop CS2, the installer runs and freezes in the midst. There is no way of installing Adobe Photoshop CS2 with intel processor. Full reinstallation of Mac OSX doesn't help. Running disk utility doesn't help either. Problems occurred with or without installing of Apple Security Update 2006-003(intel). Any comments?

Edwin, thanks for the input, and I do apologize. You are right. I should be easier with which to live. There are two major problems out there right now. That is also part of the problem. We are not used to two problems in our domain.
I own 20 Mac's in my office, and I only did these updates on my MacBook Pro 17 inch and my G5 Dual 2.3 Ghz machine that has two 30-inch Cinema Displays. I had both problems on my MacBook Pro, and the G5 had the reboot glitch. I won't update the other machines untill these problems are resolved by the OEMs.
Of the two major hiccups out there, this link indicates Quicktime's update is the source of the inability to restart machines, fixed by deleting startup items, I believe. I had this reboot problem also.
http://www.macworld.com/news/2006/05/24/cs2quicktime/index.php
Accrobat's freezing the system, the question at hand, is a result of the Security Update, fixed by rolling back to a pre-Security Update state using Archive & Install re-installation of the OS. Archive & Install does not erase your files or network settings.
Apple has released two products that fouled these systems. Bad Quality Assurance I think. I am not sure if the Security Update problem is an Apple or an Adobe software problem, i.e., Adobe may have not followed some software guidance. I am certain both companies are aware of the problem, but I am uncertain of the fix for Acrobat. We probably do need to update for security, but I can't live without Acrobat. So I will wait it out without the Security Update.

Running Dual boot windows 8 and win 7 pro with xp mode installed!! I love it!!

It took over 2 days to figure out how to adjust the bios to get my win 7 pro DVD to boot and install dual boot on this GREAT MACHINE!!
Step 1: using diskmgmt.msc you have to shring the C partition. I shrunk it so I had 80GB remaining as unallocated space.
Step 2: You have to enter the machine Bios adn set the BIOS to Both and UEFI as first
Step 3: Connect your usb dvd
Step 4: Put your win 7 pro dvd in the usb dvd drive
Step 5: Reboot your machine and when it starts press F12 to get the boot menu and select the usb dvd drive then press enter
The machine restarts
Message on screen says press a key to boot from cd/dvd
Press space and it boots up the win 7 pro DVD
After files copy and load the setup screen asks to accept the agreement and where to install win 7
BE SURE TO SELECT THE 80GB location
Then follow thru the win 7 prompts to load it.
When the machine restarts you will see a dual boot screen with Windows 7 on top as first selection and Windows 8 below it as 2nd selection.
Make sure to hit enter with windows 7 selected
The win 7 installation completes.
You will see many items with drivers not installed dont fret.
You can load most of the drivers by highlighting the device in control panel/device manager and pick update driver then select BROWSE for DRIVER and be sure to put in drive D:\ which is now the windows 8 drive and hit search.
Many of the windows 8 drivers installed with no issue.
The Realtek driver was an exception .. goto to the lenovo site and pick the x100e tablet and download the LAN driver from there about (4MB). Copy it to flash drive and install it in win 7 from the .exe file. The driver for LAN will install sucessfully. The version of the driver is 7.46 something the 7.11 versions do not workl.
I have only 3 drivers that I could not find - 2 list as unknown and are related to ACPI or power management and 1 lists as USB controller but all the USB stuff works without it.
Be sure to either shutdown the system or sign out of win 8 when your done so you get the dual boot menu. If you shutdown while logged into win 8 the next time you start up it will go right to win 8 until you signout and restart.
Just to let you know an easy way to shutdown is go to the desktop and press ALT + FN + F4 and a shutdown menu comes up on the desktop.
Once win 7 pro is installed you can download the XP mode free from Microsoft and install it.
This is of course AFTER you have ACTIVATED WINDOWS 7 ONLINE with YOUR ACTIVATION KEY(you supply).
ENJOY! This is the BEST machine I ever had!

It's been many, many years since I don't do dual boot anymore. Don't find the reason to do it, either. Different kinds of virtualization should be enough. Anyway...
dfw1417 wrote:
It took over 2 days to figure out how to adjust the bios to get my win 7 pro DVD to boot and install dual boot on this GREAT MACHINE!!
ENJOY! This is the BEST machine I ever had!
WHICH machine?
Cheers.
If I helped you, please give me some kudos! ^^

How do I install windows from USB on Macbook pro 3,1

How do I install windows from USB on Macbook pro 3,1 ?
My Superdrive is far from super anymore, So I managed to make an extern drive with both Snow Leopard Partition, Lion Partition (Since I thought Boot Camp 4,1 would bypass my problem), and Time Machine partition, Since I got 1. USB drive that works.
- My general issue is that Boot camp Refuse to see the USB drive - (Many "how to"´s though show how they install windows perfectly through the USB port, but they use airbooks!, and somehow the Macbook will not ?)
I fix that issue with >> rEFIt <<, that suddenly makes it possible for the Mac to see the USB drive, and partitions.
Which was very strange since I could use an extern HD with the whole installation to start up wipe the whole disk, and then use my extern drive with partitions to install Snow Leopard and get everything as before with timemachine. Very smart with timemachine, but very lucky that I have a extern drive that runs the whole system and that I made the partitionsdrive before. DVD-drives are the past!
Point: So the original system could see the Snow Leopard installation USB disk, but boot camp cannot find the USB drive ?????????
After rEFIt I booted and then I got this error:
Starting bootmgr.efi
Error: Unsupported while loading bootmgr.efi
I read it could be a problem with the Windows software, so I purchased an extern DVD drive, Used Disk Utility to make an image (.DMG), then used another program to convert the .dmg to .ISO.
Then downloaded a trialversion of vmWare fusion, and installed windows from the iso. Everything worked brilliant, except and that is why I want to use boot camp, Running windows in another program while running the mac system is a little hacky and slow.
Point: Nothing is wrong with the windows software, and windows runs fine.
I then downloaded the Windows DVD / USB Tool, reformatted a USB drive as Master Boot Partition, MS-Dos Fat partition, then after lots of struggling got Vmware, windows to recognise the USB drive. And installed the windows software on the USB drive, as all the walkthroughs recommend.
Then I tried for "fun"! to just install windows form the extern USB drive, and with rEFIt it will see the drive and start to do something, but then when it starts to boot, the screen just turns into black and nothing happens, and you can see the drive does NOTHING. (I think it is because I only have 1 USB drive and the Extern DVD drive does not get enough power, but again the mac refuse to see the USB drive unless it is a Snow Leopard installation USB-drive!
Well trying to install Windows Ultimate 64 Bit, which worked great in vmware, because that program installed from the .ISO file that I had on the desktop, but trying with Boot Camp did not get anywhere, what kind of **** program is this boot camp anyway!?, but then I try the new USB disk with windows made from windows, thorugh rEFIt, it sees the disk and then starts and then I get this ERROR:
rEFIt - Booting Legacy OS
Starting legacy loader
Using load option ´USB´
Error: Not found returned from legacy loader
Error: Not found from LocateDevicePath
(x 9 times)
Error: Load Error while (re)opening our installation volume
The firmware refused to boot from the selected volume. Note that external hard drives are not well-supported by Apple´s firmware for legacy OS booting
(Hey Apple please send out a updated firmware that fix this issue?!)
So how do I do it ? - or is the only option to fix the partition running the system from the extern disk. Format the whole drive in 2 from the "bottom" and install windows and then afterwards install Mac on the other partition ? Or just run windows on the mac and forget about mac software ? What a stupid solution...

There are strings in the pliist file to add other Macs so that you can use some USB-DVD drives.
This is 5 page thread, so a little more 'meat' to it:
https://discussions.apple.com/thread/3410900?start=60&tstart=0
And on PC booting Windows from a USB DVD to do the install is usually a piece of cake, sometimes you just need to specify that USB in the BIOS boot order and sometimes select via F12 (or another Fkey) and that is it.
What you have here seems to be everything and everyone is excluded unless there is a mac-model device ID string that specifies yes. An unnecessary hurdle.

Deploying only Acrobat XI Pro CC package w/ Enterprise Serial # - Still getting "Sign In Required"

Downloaded Creative Cloud Packager to create a serialized package of only Acrobat XI Pro. I further customize the deployment via Adobe Customization Wizard XI, but did not re-enter the serial number (as suggested). I am able to deploy from the Exceptions folder with the following cmd, msiexec /i "%inst%AcroPro.msi" PATCH="%inst%Updates\AcrobatUpd11006.msp" TRANSFORMS="%inst%Transforms\en_US.mst" /qn. Upon launching Acrobat, I receive the a pop-up message, "Sign In Required. Siging in with an Adobe ID and registering Creative Cloud Membership Enterprise is required within 32767 days otherwise it will stop working." I don't understand why the serial number and Adobe ID I enterred when packaging did not carry over. Any insight would be appreciated.

Downloaded Creative Cloud Packager to create a serialized package of only Acrobat XI Pro. I further customize the deployment via Adobe Customization Wizard XI, but did not re-enter the serial number (as suggested). I am able to deploy from the Exceptions folder with the following cmd, msiexec /i "%inst%AcroPro.msi" PATCH="%inst%Updates\AcrobatUpd11006.msp" TRANSFORMS="%inst%Transforms\en_US.mst" /qn. Upon launching Acrobat, I receive the a pop-up message, "Sign In Required. Siging in with an Adobe ID and registering Creative Cloud Membership Enterprise is required within 32767 days otherwise it will stop working." I don't understand why the serial number and Adobe ID I enterred when packaging did not carry over. Any insight would be appreciated.

Cannot send email from 3 accounts Mac Pro

My brand new Mac Pro cannot send email using Gmail, Shaw, or iCloud. At times I can send a simple test message, other times I cannot send. It seems the more data in the email, it for sure cannot be sent. The sent messages get stuck in the Out Box. Full green lights, no red lights in the connection diagnostics window. Any help in this regard will be much appreciated.

thank you for your reply, I did this with the same problem. Turns out that I went to FAQ section and went to the "Sharing" section of "system preferences" and changed my computer name by removing all spaces and apostrophe where it lists my computer name under Mac Book Pro, and problem solved.

A few days ago i bought the macbook pro in a Providence. In late Summer i will come back to my Country - Ukraine. I would like to know about a tax for my laptop. Can i return tax? Through the TAX FREE or return in airport? What should i do?

A few days ago i bought the macbook pro in a Providence. In late Summer i will come back to my Country - Ukraine. I would like to know about a tax for my
laptop. Can i return tax? Through the TAX FREE or return in airport? What should i do?

You need to talk with the tax authorities in the countries to which you traveled and that of your home country. We are all end-users liek you and not Apple agents.

How do i use an external display with my macbook pro?

How do I use an external display with a macbook pro?

Just buy the proper adapter cord, such as MiniDisplay port to HDMI for example. Plug it in and it will be automatically recognized. Use System Preferences > Displays to set options.
The display can Mirror your primary desktop or Extend the Desktop.
Regards,
Captfred

Is there a work-around to enable Digital Photo Pro on the Microsoft Surface Pro ????

Is there a way to use Digital Photo Pro on the Microsoft Surface Pro?
As I understand the problem DPP is unable detect the screen resolution of the tablet ( the defauilt res of the tablet
is 1920 x1080) with a minimum of 1024 x768.
It would be usful if one could type in your working screen res into at startup if that's the only problem
___I've looked at other screen drivers from Intell but I realize if I could install thrm I'de lose the touch functionallity
Are there any other ideas out there???
Thanks artB

Canon DPP is Canon provided application for desktop/laptop computers and they don't have a version for any tablets as far as I'm aware (not even iOS or Android versions).
But there are other photo editing programs that would work. I have an iPad. While Apple has their own photo software (which isn't going to work on a Windows tablet) Adobe has an app called PS Touch.
PS Touch isn't nearly as full featured as Photoshop. It limits the image resolution (it resizes any images that you import to it so they don't exceed the max resolution) but it does have most of the commonly used adjustments. So if a person were just trying to get something out, it works in a pinch.
One other catch is that PS Touch can't deal with RAW images... so it's JPEG only. But I can import JPEGs off the card into the iPad and then edit them -- not as well as I can if they're on a regular computer, but this is what I'ved when I'm away for a weekend with my camera.
Tim Campbell
5D II, 5D III, 60Da

Polygonal lasso tool not working with stylus on Surface Pro 2

Hi guys,
I'm new here so please bare with me if I'm posting in the wrong place or don't make immediate sense.
Hardeware / software used: surface pro 2 and I'm running photoshop CS5.
Problem is a fairly basic one: I am trying to make basic selections using the polygonal lasso tool (using the stylus that comes with the tablet) but it simply will not work. All I get when I touch the stylus to the screen is the circle that appears then fades. If I attach the keypad and try using that then it works no problem at all.
Does anyone have any ideas as to whether there is a particular setting that I need to switch on or off e.g. something relating to pressure sensitivity (although not sure why this would affect this particular selection tool)?
I've searched the web and come up with nothing so far so any help is greatly appreciated!
Thanks for your time
Scott

same problem on surface pro 3 !!!!
and i think quite significant, for lot of artists using polygonal lasso a lot (including me). How come that the stupid surface cannot work properly

G2TiVX Pro-VT

Similar Messages

Maybe you are looking for