G3 (blue one) OSX server 10.2

Hello!
I'm very new to this, (macs at home and posting things that is!!) but hope somebody can help. You'll have to bear with me!
I've got a G3 (blue & white one) with OSx server 10.2 (maybe 10.2.8, can't check at the moment) loaded on it. Firstly, can I install Tiger 10.4 onto it? Because when I put the install disk into the mac it didn't recognise it. I have two hard drives, so huge space.
I have a big prob though. I had startup troubles, which I fixed and then decided (maybe very wrongly!) to reinstall the server software again, try freshening it up. I did the complete erase and install. So I followed the installer prompts but at the end, the "finish up" section, it just sat there. The blue bar never got any bigger and it sat like that for 15 hours. (I have quite a bit of patience...) Surely that's not normal??
What do I do? It seems to be stuck. I've reset, unplugged and started up again the the welcome to install screen is there, no way to get out of it and so I go through the process again. Again it sticks on the last "finish up" section, I can't get out of it.
I'm not that experienced with macs. Its my first one, a second hand one. I use a mac at work, a G4 for design work, but everything with software and upgrades is done for us, by the guys we bought the equipment from. I think macs are amazing so wanted one at home, so when the opportunity to purchase the old G3 server came up I took it!
I've tried holding down the c during startup, to start from the install disk, that didn't work.
Hope somebody can't help me out before I pull all my hair out.
Yours hopefully
G3 blue one Mac OS X (10.2.x) Server

Similar Messages

Multiple domains hosted on one OSX Server

Hi guys,
Does anyone know if it is possible to host more than one domain name on OSX server?
A client of mine runs a number of businesses and is considering Snow Leopard Server, and wants to have multiple email domains and websites hosted on one server. Also per-account contacts sync and calendar sync would be useful, does anyone know if that's available?
Thanks!
W.

You can certainly host multiple domains on Mac OS X Server. There are a few options depending on how you want it to work.
If all the usernames are the same across all domains (e.g. [email protected] is the same person as [email protected]) then just change the mail server configuration to match all the domains in the mydestination parameter in /etc/postfix/main.cf.
If the domains are different (e.g. [email protected] is not the same account as [email protected]) then you have two options - one is to use the postfix model (which requires command-line management), the other is to add the email addresses in the shortname section for each user.
You may have some issues integrating contacts and calendars, though - if you take the postfix model then the users won't exist in Open Directory and won't have a calendar/contact link, etc.
If you follow the shortname model then you have one directory with all users in all domains and you'll need to work to separate them out if you need to.

OSX Server Hangs on Blue screen at startup

We have an Xserve Running 10.5.8. We have been having strange issues for some weeks with client's logging in and their desktops being missing. Last Friday I noticed that the backup was not running correctly and I had a student who had lost her work mysteriously too. I decided to restart the server to see what would happen. On restart I cannot log in to the server either remotely or locally because after the white apple with spinner screen the machine goes to a blue screen with no login window. Services are up and running, I can view and use Server Admin and Workgroup Manager, and I can ssh into the server. I have trawled the internet in search of answers but all to no avail. There are some errors in the log but I am not familiar enough with these things to know which are significant to this problem. To further complicate matters the OSX server disk is nowhere to be found, hasn't been seen since well before I arrived on campus. I have ordered Snow Leopard for this machine but would like to get to the bottom of the issues.
I have booted into safe mode from ssh but this has made no change to the situation. I am relatively new to comand line management of macs so please don't assume I know how to use it like an old pro. I am learning rapidly.
Thanks
Lincoln
Here is a log from a fresh reboot:
Jul 6 13:37:50 localhost com.apple.launchctl.System[2]: /etc/rc.server: line 55: logger: command not found
Jul 6 13:37:50 localhost com.apple.launchctl.System[2]: kern.maxproc: 532 -> 2500
Jul 6 13:37:50 localhost com.apple.launchctl.System[2]: kern.ipc.somaxconn: 128 -> 2500
Jul 6 13:37:50 localhost com.apple.launchctl.System[2]: kern.maxnbuf: 16384 -> 21000
Jul 6 13:37:50 localhost com.apple.launchctl.System[2]: kern.maxvnodes: 66560 -> 120000
Jul 6 13:37:50 localhost com.apple.launchctl.System[2]: kern.maxprocperuid: 266 -> 1000
Jul 6 13:37:52 localhost com.apple.launchctl.System[2]: launchctl: propertyList is NULL
Jul 6 13:37:52 localhost com.apple.launchctl.System[2]: launchctl: no plist was returned for: /System/Library/LaunchDaemons/nmbd.plist
Jul 6 13:37:54: --- last message repeated 1 time ---
Jul 6 13:37:52 localhost com.apple.launchctl.System[2]: launchctl: propertyList is NULL
Jul 6 13:37:52 localhost com.apple.launchctl.System[2]: launchctl: no plist was returned for: /System/Library/LaunchDaemons/org.samba.winbindd.plist
Jul 6 13:37:54: --- last message repeated 1 time ---
Jul 6 13:37:52 localhost com.apple.launchctl.System[2]: launchctl: propertyList is NULL
Jul 6 13:37:52 localhost com.apple.launchctl.System[2]: launchctl: no plist was returned for: /System/Library/LaunchDaemons/smbd.plist
Jul 6 13:37:54: --- last message repeated 1 time ---
Jul 6 13:37:52 localhost com.apple.launchctl.System[2]: launchctl: Please convert the following to launchd: /etc/mach_init.d/dashboardadvisoryd.plist
Jul 6 13:37:52 localhost com.apple.launchctl.System[2]: getaddrinfo(): Temporary failure in name resolution
Jul 6 13:37:52 localhost com.apple.launchd[1] (com.apple.RemoteDesktop.PrivilegeProxy): Unknown key for boolean: EnableTransactions
Jul 6 13:37:52 localhost com.apple.launchd[1] (org.apache.httpd): Unknown key: SHAuthorizationRight
Jul 6 13:37:52 localhost com.apple.launchd[1] (org.cups.cupsd): Unknown key: SHAuthorizationRight
Jul 6 13:37:52 localhost com.apple.launchd[1] (org.ntp.ntpd): Unknown key: SHAuthorizationRight
Jul 6 13:37:52 localhost com.apple.launchd[1] (org.x.privileged_startx): Unknown key for boolean: EnableTransactions
Jul 6 13:37:55 localhost kernel[0]: formExpert/PCI0@0/AppleACPIPCI/RP01@1C/IOPCI2PCIBridge/P8PC@0/IOPCI2PCIBridge/S AS@2/AppleLSIFusionSAS/SAS Target 052B290A8A98376A@3/IOSCSITargetDevice/IOSCSILogicalUnitNub@0/IOSCSIPeripheralDe viceType00/IOBlockStorageServices/IOBlockStorageDriver/ST380815AS N Media/IOGUIDPartitionScheme/Customer@2
Jul 6 13:37:52 localhost kextd[24]: safe boot detected
Jul 6 13:37:55 localhost kernel[0]: BSD root: disk0s2, major 14, minor 2
Jul 6 13:37:52 localhost kextd[24]: safe boot; invalidating extensions caches
Jul 6 13:37:55 localhost kernel[0]: FusionMPT: Notification = 22 (SAS Discovery) for SCSI Domain = 0
Jul 6 13:37:55 localhost kernel[0]: Discovery condition = 0x00000000
Jul 6 13:37:55 localhost kernel[0]: IPv6 packet filtering initialized, default to accept, logging disabled
Jul 6 13:37:55 localhost kernel[0]: Jettisoning kernel linker.
Jul 6 13:37:55 localhost DirectoryService[25]: Launched version 5.8.1 (v514.28)
Jul 6 13:37:59 localhost kernel[0]: AppleIntel8254XEthernet: Ethernet address 00:1e:52:f3:ca:24
Jul 6 13:37:59 localhost kernel[0]: AppleIntel8254XEthernet: Ethernet address 00:1e:52:f3:ca:25
Jul 6 13:38:06 localhost kernel[0]: Resetting IOCatalogue.
Jul 6 13:38:06 localhost kextd[24]: 0 cached, 287 uncached personalities to catalog
Jul 6 13:38:06 localhost kernel[0]: Matching service count = 0
Jul 6 13:38:06 localhost mDNSResponder mDNSResponder-176.3 (Jun 17 2009 18:57:49)[31]: starting
Jul 6 13:38:08 localhost kernel[0]: Previous Shutdown Cause: 3
Jul 6 13:38:08 localhost kernel[0]: ACPI_SMC_PlatformPlugin::getCPU_PSSData - WARNING: _PSS table invalid; ACPI is probably incomplete
Jul 6 13:38:10: --- last message repeated 3 times ---
Jul 6 13:38:10 localhost com.apple.launchd[1] (com.openssh.sshd): Unknown key: SHAuthorizationRight
Jul 6 13:38:12 localhost kernel[0]: Ethernet [Intel8254X]: Link down on en0 called by enableHardware() --
Jul 6 13:38:13 localhost bootlog[83]: BOOT_TIME: 1309923414 0
Jul 6 13:38:14 localhost com.apple.printservice_LPR_mDNS_Media_A3_Printer[63]: Registering Service Media A3 Printer._printer._tcp port 515 TXT txtvers=1 qtotal=1 rp=Media_A3_Printer pdl=application/postscript ty=\(null\)
Jul 6 13:38:16 localhost kernel[0]: Ethernet [Intel8254x]: Link up on en1, 1-Gigabit, Full-duplex, No flow-control, Debug [792d,ac08,0de1,0e00,c1e1,7800]
Jul 6 13:38:14 localhost com.apple.printservice_LPR_mDNS_Media_A3_Printer[63]: 13:38:14.436 Got a reply for service Media A3 Printer._printer._tcp.local.: Name now registered and active
Jul 6 13:38:14 localhost com.apple.printservice_LPR_mDNS__ITS3_01m[65]: Registering Service Media A3 Printer @ ITS3-01m._printer._tcp port 515 TXT txtvers=1 qtotal=1 rp=_ITS3_01m pdl=application/postscript ty=\(null\)
Jul 6 13:38:14 localhost com.apple.printservice_LPR_mDNS__ITS3_01m[65]: 13:38:14.436 Got a reply for service Media A3 Printer @ ITS3-01m._printer._tcp.local.: Name now registered and active
Jul 6 13:38:14 localhost com.apple.printservice_LPR_mDNS_HCCSTU_Media_Test_Printer[64]: Registering Service HCCSTU-Media Test Printer._printer._tcp port 515 TXT txtvers=1 qtotal=1 rp=HCCSTU_Media_Test_Printer pdl=application/postscript ty=\(null\)
Jul 6 13:38:14 localhost com.apple.printservice_LPR_mDNS_HCCSTU_Media_Test_Printer[64]: 13:38:14.436 Got a reply for service HCCSTU-Media Test Printer._printer._tcp.local.: Name now registered and active
Jul 6 13:38:14 hillcrestmac com.apple.HeadlessStartup[74]: 65:6e:30:00:1e:52
Jul 6 13:38:15 hillcrestmac watchdogtimerd[54]: Automatic reboot timer enabled.
Jul 6 13:38:15 hillcrestmac named[50]: starting BIND 9.4.3-P3 -f
Jul 6 13:38:16 hillcrestmac fseventsd[75]: event logs in /.fseventsd out of sync with volume. destroying old logs. (21 77 136)
Jul 6 13:38:17 hillcrestmac rpc.statd[59]: statd.notify - no notifications needed
Jul 6 13:38:17 hillcrestmac /sbin/nfsd[67]: Too many groups for root
Jul 6 13:38:17 hillcrestmac /sbin/nfsd[67]: exports:2: path contains non-directory or non-existent components: /Volumes/Data/Library/NetBoot/NetBootSP0
Jul 6 13:38:17 hillcrestmac /sbin/nfsd[67]: exports:2: no usable directories in export entry
Jul 6 13:38:17 hillcrestmac /sbin/nfsd[67]: exports:2: using fallback (marked offline): /Volumes/Data
Jul 6 13:38:17 hillcrestmac /sbin/nfsd[67]: Too many groups for root
Jul 6 13:38:17 hillcrestmac /sbin/nfsd[67]: exports:3: path contains non-directory or non-existent components: /Volumes/Data/Library/NetBoot/NetBootClients0
Jul 6 13:38:17 hillcrestmac /sbin/nfsd[67]: exports:3: no usable directories in export entry
Jul 6 13:38:17 hillcrestmac /sbin/nfsd[67]: exports:3: using fallback (marked offline): /Volumes/Data
Jul 6 13:38:19 hillcrestmac fseventsd[75]: log dir: /.fseventsd getting new uuid: 99F02D5F-57A3-4BDE-AC4B-76CC829E92B0
Jul 6 13:38:19 hillcrestmac configd[29]: setting hostname to "hillcrestmac.hillcrest.local"
Jul 6 13:38:19 hillcrestmac configd[29]: AppleTalk startup
Jul 6 13:38:19 hillcrestmac kextd[24]: writing kernel link data to /var/run/mach.sym
Jul 6 13:38:20 hillcrestmac named[50]: command channel listening on 127.0.0.1#54
Jul 6 13:38:24 hillcrestmac /System/Library/CoreServices/loginwindow.app/Contents/MacOS/loginwindow[69]: Login Window Application Started -- Threaded auth
Jul 6 13:38:25 hillcrestmac emond[77]: SetUpLogs: uid = 0 gid = 0
Jul 6 13:38:25 hillcrestmac emond[77]: SetUpLogs: opening /Library/Logs/EventMonitor/EventMonitor.error.log
Jul 6 13:38:26 hillcrestmac com.apple.launchd[1] (com.apple.portmap[100]): Policy denied Mach service lookup: com.apple.dyld
Jul 6 13:38:28 hillcrestmac /sbin/nfsd[67]: Too many groups for root
Jul 6 13:38:28 hillcrestmac /sbin/nfsd[67]: exports:2: export entry OK (previous errors cleared)
Jul 6 13:38:28 hillcrestmac /sbin/nfsd[67]: Too many groups for root
Jul 6 13:38:28 hillcrestmac /sbin/nfsd[67]: exports:3: export entry OK (previous errors cleared)
Jul 6 13:38:28 hillcrestmac fseventsd[75]: bumping event counter to: 0x34cab (current 0x166) from log file '00000000000347cc'
Jul 6 13:38:28 hillcrestmac configd[29]: AppleTalk startup complete
Jul 6 13:38:36 hillcrestmac com.apple.KerberosAutoConfig[143]: Couldn't find KerberosClient config record
Jul 6 13:38:37 hillcrestmac com.apple.KerberosAutoConfig[144]: Couldn't find KerberosClient config record
Jul 6 13:38:54 hillcrestmac com.apple.ATSServer[154]: FODBCheck: New annex file created
Jul 6 13:38:59 hillcrestmac loginwindow[69]: Login Window Started Security Agent
Jul 6 13:39:02 hillcrestmac servermgrd[60]: servermgr_web: Created WebDAV lock directory /var/run/davlocks
Jul 6 13:39:08 hillcrestmac servermgrd[60]: servermgr_calendar: created default calendar virtual host
Jul 6 13:39:09 hillcrestmac servermgrd[60]: servermgr_ipfilter:ipfw config:Notice:Flushed IPv4 rules
Jul 6 13:39:09 hillcrestmac servermgrd[60]: servermgr_ipfilter:ipfw config:Notice:Flushed IPv6 rules
Jul 6 13:39:15 hillcrestmac servermgrd[60]: servermgr_info: [60] [CertificateManager exportIdentity:]: Error exporting private key: SecKeychainItemExport (err = -25260)
Jul 6 13:39:16: --- last message repeated 1 time ---
Jul 6 13:39:16 hillcrestmac com.apple.DirectoryServices[25]: Enter machine password:
Jul 6 13:39:54 hillcrestmac kernel[0]: serialnumberd 209 FS_WRITE_DATA SBF /dev/dtracehelper 13 (seatbelt)
Jul 6 13:39:54 hillcrestmac /usr/sbin/serialnumberd[209]: serialnumberd started as /usr/sbin/serialnumberd.
Jul 6 13:39:55 hillcrestmac kernel[0]: serialnumberd 209 FS_READ_DATA SBF /dev/autofs_nowait 13 (seatbelt)
Jul 6 13:39:55 hillcrestmac kernel[0]: serialnumberd 209 FS_READ_DATA SBF /usr/sbin 13 (seatbelt)
Jul 6 13:39:55 hillcrestmac /usr/sbin/serialnumberd[209]: SN_Register(): New persistent, network record [tag=xsvr, extra=hillcrestmac.hillcrest.local] registered successfully by pid 209.
Jul 6 13:40:01 hillcrestmac /usr/sbin/serialnumberd[209]: launchd did not pass version 1 Mach port (bad launchd plist?)
Jul 6 13:40:31 hillcrestmac com.apple.dyld[26]: update_dyld_shared_cache[26] regenerated cache for arch=i386

Well I never did come up with a solution to this problem. In the end the Snow Leopard discs turned up and an upgrade fixed the problem.

What are the right DNS records to host more than one site on OSX Server (ML). My conf in Server.app looks right but one of my sites lands on the default server. Any suggestion?

I started using OSX Server on Mountain Lion a few days ago and it looks promising.
I do however measure my ignorance in DNS matters...
I defined two websites in addition to the the Default Server, so I have three names to deal with.
For argument's sake
- www.main.com is the default site
- www.sitea.com is the first site
- www.siteb.com is the second site
I define a virtual host for www.sitea.com and another for www.siteb.com
The resulting apache conf is what I would expect, I am pretty sure it is correct.
So I modified my DNS entries (they were A records) to point to my new OSX Server.
My result is:
- www.main.com shows the default site
- www.sitea.com shows the first site
- www.siteb.com shows...the default site
Any ideas?
Cheers

Thanks MrHoffman!
My problem ended up being a name but not in the DNS!...In Apache.
Your information allowed me to rule out possibilities and zoom in to the culprit faster.
I just report here the conclusion hoping it can help someone else.
When I installed OSX Server last week, I had in mind to principally run siteb.
During the initial install, this is what I must have entered and then forgot about it.
Then I defined my virtual hosts sitea and siteb and realised my machine was called siteb and changed its name to main to avaid a name collision. At which time I remember OSX Server telling me that changing the name could have consequences...But it apparently went ok, and it did except for one little thing.
The consequence was this:
in the main configuration file /Library/Server/Web/Config/apache2/http_server_app.conf the ServerName directive had remained siteb (instead of main). I manually updated it with TextEdit (could do vi from bash, its the same) and replaced siteb with main.
There is a way to detect it.
In Server.app, there is a "logs" panel, which displays all sorts of logs for everything including the websites.
Each website's logs are presented as "access" and "error" logs. The information was there, but I could not see it because the viewing window in remarkably small for so much information in raw text...
web logs are actually written to only two files in /var/log/apache2 (error.log and access.log)
I openned two bash windows and run tail -f on error.log in one and tail -f access.log in the other.
When I started the web service, apache threw a warning stating from mod_ssl saying that the certificate did not match the serve name...I the certificate was what I expected, I checked http_server_app.conf and found the ServerName directive that was not changed when I renamed my server...
Easily fixed when its found, but it can take a while to find.
BTW, I was using A DNS records for and it works, but I find your method of using CNAME records documents the administrator's intent better than with A records; I started to do the same. (A records a useful though, they can run a domain across multiple machines)
Cheers mate!

Trying to limit a user on OSX Server to one directory for FTP

Hey there everybody,
I'm trying to set up a client FTP for a new mac mini running OSX Server (Mavericks). FTP is enabled and I am able to get and put files but, the server is going to be used for a client services company and we will need to use it to transfer files back and forth without allowing access to the whole machine. The core issue is when I FTP in as a user I can still move around and see folders and files. I would like to create a user that can only see one folder or directory and only get / put files to that one place. Can't seem to find any similar posts, though I would assume this is fairly common.
Huge thanks in advance!

Hello again,
I have tried sending messages from my webmail account in another domain and get the following reply:
This is the Postfix program at host www.patrickwgill.com.
I'm sorry to have to inform you that the message returned
below could not be delivered to one or more destinations.
For further assistance, please send mail to <postmaster>
If you do so, please include this problem report. You can
delete your own text from the message returned below.
The Postfix program
<[email protected]>: Command time limit exceeded:
"/usr/bin/cyrus/bin/deliver"
Reporting-MTA: dns; www.patrickwgill.com
Arrival-Date: Sun, 8 Jan 2006 14:05:25 -0500 (EST)
Final-Recipient: rfc822; [email protected]
Action: failed
Status: 5.0.0
Diagnostic-Code: X-Postfix; Command time limit exceeded:
"/usr/bin/cyrus/bin/deliver"
So, it appears to be just hanging for some reason and timing out. Any ideas? I really appreciate your help.

Can I tether 9 PowerMac g5's running osx 10.5.6 via FireWire to act as one giant server?

Hello, I currently have 9 PoweMac G5's and one 1st generation Mac Pro laying around, all running OS X 10.5.8 and I wanted to know I it would be possible to install OS X server on all of them and tether them together via FireWire to run as one server.

It depends on what you mean by tether and one giant server? One Giant Server is a question that potentially covers a lot of ground and unless you give more specifics on what your thinking is it's not one that's easily answered.
However using firewire allows connectivity over TCP/IP or Target Disk Mode (TDM). As you know TCP/IP is a network protocol and TDM offers functionality for using the connected computer as an externally connected hard drive and not much else on the active mac the other macs are connected to. I suppose you could 'design' a network that has all 10 macs connected and 'clustered' in a way that harnasses processing power on all of them (think SETI program) to do the limited specific tasks OSX Server supports. Anything more would be dependant on your skills. But then why would you use firewire when ethernet would be the more obvious and faster thing to use anyway.
I think the 'best' you can do to run them as one giant server over firewire is to TDM them to your most powerful mac (the MacPro) and simply share the hard drives. But why would you do that? It would be more efficient and cost effective to simply load the four drives bays on your MacPro with the largest drives it supports (2TB or 3TB) and use those instead.
Either way all you'd have would be a single file server and not much else.

OSX server workgroup manager Won't allow me to add a group because it thinks there is already one

OSX server workgroup manager Won't allow me to add a group because it thinks there is already one. Anyone can help with solution.

Worked it out all I had to do was put workgroup manager into local and delete group/s

Re install of osx server stuck

Hello!
I'm very new to this, (macs at home and posting things that is!!) but hope somebody can help. You'll have to bear with me! (My apologies if you've seen this before but I've just realised I posted it in the wrong area and didn't know how to move it so I've reposted it here. Really sorry!)
I've got a G3 (blue & white one) with OSx server 10.2 (maybe 10.2.8, can't check at the moment) loaded on it. Firstly, can I install Tiger 10.4 onto it? Because when I put the install disk into the mac it didn't recognise it. I have two hard drives, so huge space.
I have a big prob though. I had startup troubles, which I fixed and then decided (maybe very wrongly!) to reinstall the server software again, try freshening it up. I did the complete erase and install. So I followed the installer prompts but at the end, the "finish up" section, it just sat there. The blue bar never got any bigger and it sat like that for 15 hours. (I have quite a bit of patience...) Surely that's not normal??
What do I do? It seems to be stuck. I've reset, unplugged and started up again the the welcome to install screen is there, no way to get out of it and so I go through the process again. Again it sticks on the last "finish up" section, I can't get out of it.
I'm not that experienced with macs. Its my first one, a second hand one. I use a mac at work, a G4 for design work, but everything with software and upgrades is done for us, by the guys we bought the equipment from. I think macs are amazing so wanted one at home, so when the opportunity to purchase the old G3 server came up I took it!
I've tried holding down the c during startup, to start from the install disk, that didn't work.
Please can somebody help me out before I pull all my hair out?!?!? (Mind you, I wonder what I would look like bold? h Nah, on second thoughts... please help...)
Yours hopefully
G3 blue one Mac OS X (10.2.x)
G3 blue one Mac OS X (10.2.x)

How to Clean Install OS X Mavericks - OS X Daily
Alternatively, you can boot into internet recovery (option + command + R) and proceed from there (versus creating a bootable installer).

Help for first install of macpro with osx server

Hello to all
it's my first message on this forum, i'm seeking for help because i'm kind of new with Mac systems.
I'm gonna explain the problem
So we are going to buy a mac pro and put 4*2To inside with raid 5 and osx server.
The problem is that the cost of installation of sotwre and deployement etc is really expensive.
I need to create a vpn too, this mac pro is gonna be a storage and multiple users must have acces to it. In fact this mac will be connected on the router and users will acces to it on local network then later we're gonna move from our base so the mac will be at the home of one of us and other users will have to access it from outside.
I was thinking avoyding cost of install by doing it myself.
So i've thinked that the best way to do it is by asking help to the community.
Is anyone can help me with this or tell me where i can find tutorials to do it?
I have skills but this is hard form me. The thing is that i learn fast. But i need help.
Maybe my post is not really clear i write as it comes to me, english is not my langage too.
So feel free to ask me questions or informations if you need.
In the same time i'm reading posts on the foum about this kindof installations.
Thank u so much
.anto.

Dear Marcassin
i am happy to help to your problem .
first i would say you must read the Documentation. and you should familier with Mac Os installation System.
in your Mac Server DVD you will find the schedule sheet . print that and plan your server first. it will really help full. then come and list down the all the requirements.
may be you will need more services after that.
But again again again . read that sheet and fill all the requirements. and come back or read specific captors in the Documentation.
if you want more details about the installing sachira.herath at gmail
 certified Pro 10.6/10.5

Outlook doesn't want to connect with OSX Server on 2 out of 3 clients

I have three computers on which I have installed Outlook 2011. All three are running Mavericks. On one of them, a MacBook air, I have established an outlook account connecting to my OSX server with no problems. On the other two computers when I set the parameters the same way, I cannot establish an outlook account. When I use Apple Mail on any of the three machines, I am able to establish accounts for iCloud and the OSX server with no problems. Can anyone point me to the source of this problem or a method for trouble shooting it?

Hi tommy-ch,
Apa kabar,
Do visit and post your thread in boot camp discussion:
http://discussions.apple.com/forum.jspa?forumID=1165&start=0
There are more experience user on bootcamp that might gladly help you out.
Good Luck.

File locking with OSX Server & Microsoft Word

We have a small office LAN based on a Airport Extreme bases station. Periodically Microsoft Word reports a break in connection to the shared folder where we store documents to get disconnected. When that happens and the user reconnects to the share, the user gets the file read-only message for the Word document that was open at the time.
I have found that in order to clear the read-only flag, I have to restart the server and open the Word file on the server with the ID of the user who was editing the file on the remote computer. Only that seems to clear the file locking that causes the file to be read-only.
I cannot figure out a less drastic way to release the lock file. I don't see any hidden temp files in the same folder as the document that is locked for editing found by ls -a or in the root direction of the shared folder in the .TemporaryItems/folders.<UID> that seems to be holding the lock.
I have run chflags nouchg <Word file> from Terminal, but that seems to have no effect either. I also used xattr to see if there were any locks held that way, but I don't see anything that way either.
File sharing to Macs only, which are configured just to use AFP through OSX Server.
Does anyone understand how the file locks of Word documents can be released directly with out restarting the server?
I should add that the underlying problems seems to be WiFi related. The behavior is that the WiFi connection seems to break long enough that the shared volumes disconnects. Outlook also causes a break. This behavior seems to have started with 10.9 and the purchase of new Retina Display MacBook Pros. I turned off AppNap on the Office applications but that is not clearly helpful. I also have been told the problem seems more likely to occur when Word is open in the background and another program like Outlook is in the foreground.
Any suggestions appreciated.

Apple write an operating system and also produce file sharing software as part of that to be used as a file server. Apple provide documentation for third-party software developers on how they should write software to work with Apple's software and also give those developers early access to new versions so those third-party developers can test and if needed make adjustments and issue updates to cope with any Apple changes.
Some third-party developers are good at dealing with this, some are bad, and some totally ignore what Apple does and give the impression they don't care if their product works properly or not. I think we can all judge where Microsoft sits.
It appears Microsoft have never paid any attention in particular to how Apple expect file-locking to be handled when accessing files on a Mac server. There have been problems for years and years and years with Office. Two other problems I have seen which seem different to yours but probably related are -
With Office documents it is supposed to be possible for more than one person to edit the same file at the same time, consider it a miracle if this actually works
With Office in particular Word, there is an auto-save function, unfortunately the way this seems to be implemented it seems that Word creates a new temporary file each time it auto-saves the document and keeps all the previous temporary files open still, this eventually means potentially over a hundred temporary files are open - just for one Word document and you can then hit a limit on the total number of files you are allowed to have open at the same time. At this point further auto-saves fail, and you also encounter great difficulty doing a real full save of the document.
I do not hold Apple completely blameless over this issue, it is likely their file-locking implementations change too often, and have inadequate documentation, however even considering this a company the size of Microsoft with the amount of sales (and profit) they derive from Office for the Mac has no excuses at all for failing to put the effort in to resolve any such clearly critical problems.
We could go on and on about other areas where Microsoft don't play by the (software) rules. Even in Windows Office does not obey the standard print dialog rules Microsoft specified themselves!
Unfortunately not only is Office for Mac upgraded infrequently, but even when new paid for upgrades are released Microsoft have a history of still not fixing bugs. It goes without saying that a mere free update is even less likely to actually fix a bug, typically such free updates only address security issues. The next version of Office is going to be Office for Mac 2014 see http://www.macworld.com/article/2106643/microsoft-will-release-a-new-version-of- office-for-mac-this-year.html
One area I confidently predict Microsoft not to resolve in Office for Mac 2014 is that fact that Word for Mac still does not support right-to-left languages like Hebrew and Arabic. This is despite the fact that OS X itself has supported this for years and years, and despite the fact other Mac programs support this including the free TextEdit and Pages - both of which can read Word files. Some people may remember that at one point the Israeli Government temporarily banned all Microsoft software over this issue. See http://apple-beta.slashdot.org/story/03/10/15/2215249/israeli-government-suspend s-microsoft-contracts This issue goes back over TEN years!!
I note that Microsoft has now taken their OfficeForMac blog offline, probably due to the weight of criticisms. I would not say it is due to out-right anti-Microsoft hate, that war ended long ago. We just want products that work. I myself do use Microsoft products, even at home - where they are the best solution, so I use Microsoft Media Center for example. Sadly this is now being neglected by Microsoft.

Website issue with osx server and hosting

so i had a website hosted from my osx server and i had bought the domain name from godaddy it worked great but i desided to instead of hosting it on my osx server to just host it on godaddy so i turned to server off and added the domain to my godaddy account hosting and now it works but one problem all computers can veiw the website but mine. i think it has somthing to do with the fact that my mac was the one hosting it. but if i go to my browser and go to my wesite i get a error but than i go to any other computer and it works great help please

A couple ideas
check our /etc/hosts file, you might have an entry for your domain.
sudo pico /etc/hosts
     do you see any entries for your domain? If so:
     edit the file by navigating with the arrow keys, delete the line
     with your domain. Hit ctrl-x when done (enter 'y' to save the change)
Clear your DNS cache
     dscacheutil -flushcache
Try a different DNS server, go into your network settings (In System Preferences)
Go to Ethernet or Wifi (whichever you are using), click Advanced and under the DNS tab enter:
     8.8.8.8
Make sure no entries are ABOVE it.
If none of this works, send the results of these commands:
     cat /etc/hosts
     cat /etc/resolv.conf
     dig +short mydomain.com   (replace with your domain)
The results of these should point us in the right direction.
Jeff

Cant connect to OSX server over network in recovery mode

Hi guys.
First of all, thanks for any help you can give me.
I am running osx server on a mavericks mac mini on a home network. Attached to it I have a 1tb hard drive to which all the macs in my house use time machine to back up over my network and they are stored there.
I have just formatted one of my macs and want to restore it from these time machine backups that are on the osx server on my network.
When i enter recovery mode from boot (COMMAND R), it can see the "backups" on networks "Matts-Mac-Mini" but when i then click "CONNECT" it says "Enter your name and password for the server "Matts-Mac-Mini/local" so that Time Machine can access it.
It gives me a box with NAME and PASSWORD and a CONNECT button.
By DEFAULT the "NAME" it starts with is "root".......which I dont understand.
I have tried every single iteration of names and passwords I can think of but it still wont connect, it either shakes the box or gives an error saying "There was a problem connecting to the server "Matts-Mac-mini.local". Check the server name of IP address and then try again".
I have tried the log in details for the osx server, the login details for the mac im trying to connect from, used root as the username, tried capitals, no capitals, spaces no spaces etc. I am at a total loss and about to tear my hair out!!
Is there anyone able to give me any help with this please, I would be SO grateful!
Many thanks,
hardtofin

I think I have isolated the password, with a certain username and password the box never shakes and instead gives the error: "There was a problem connecting to the server "Matts-Mac-mini.local". Check the server name of IP address and then try again".
Are you able to offer any help with this? I dont see why i can't connect to it, if the imac can already see it?
Many thanks again,
hardtofin

Can I use OSX Server instead of Dropbox?

We are considering buying OSX Server. One basis for the purchase would be to replace Dropbox. We currently use Dropbox with local sync of folders, so all oru people work directly in folders that are synced to everyone else. Thus all docs are available locally all the time adn then they are available on everyones iPads, iPhones and Android phones. However a downside of that is that it takes space on the local hard drive, we can have conflicts where multiple people open a file.
Can someone please explain how remote users get access to the OSX server and the documents on it and if there is a "syncing" option similar to Dropbox?
Thanks
John

Answers:
#1 Yes, if set up correctly the server can be available to everyone with Internet access.
Typically this would be via a VPN connection. One caveat–only one VPN connection can be active from a particular LAN. In other words, if two computers on the same LAN want to connect via VPN to your server, this will not work (at least it wouldn't under earlier versions of OS X).
WebDAV is a possibility but I have not had good results when using WebDAV. Access is limited to apps that support WebDAV connections (such as Pages, Numbers, and Keynote). Even then it seemed a bit problematic.
#2 Any offline documents from the server must be managed manually. In other, you must manually copy them back and forth. As Linc mentioned above, OS X Server does not offer sync functionality.

Mail Setup at OSX Server issues

I have several devices (iPad, iPhone, Desktop and Laptop) that access my email accounts (Personal-POP and Business-IMAP accounts) without any issues.
I'd like to use my Mac Mini OSX Server as a main client to all these emails account and collect emails and distribute it at my local network.
Is it possible? I'd like to use all resources from my ISP that can handle with virus, security ... but at the same time I'd like to keep local at this OSX Server all messages that we usually send and receive when we are using local network at office. I read manual several times but is not clear for me if this feature is available.
All suggestions will be welcome.
Edison

OS X Server and most mail servers do not include the ability to collect mail from remote servers, though it is possible to build a somewhat precarious scheme based on forwarding messages from the remote servers involved. Google's mail service and its gmail client do have the ability to retrieve mail from other remote mail servers without resorting to forwarding mail around, but you'd need to integrate something like imapsync or fetchmail to perform this on OS X Server. (Related — my old replies to related questions here in the forums will often mention imapsync, as well.)
In general when running a mail server that's accessible to the Internet, you'll need DNS and also static (fixed) IP from your provider for OS X Server and this is the preferred and most reliable means, this if if you want to send outbound mail through the server, or you'll need to relay your inbound and outbound mail through one of the relay services providers. Static IP and proper DNS can also be a factor when receiving mail from some of the more cautious mail servers around. Failing to have IP and DNS correct mails mail sent from your server can be dropped, and sometimes mail sent to your server will be dropped before being passed to your server.
OS X Server does include some spam- and malware-related capabilities and various Postfix, Amavis, ClamAV and related pieces to keep a lid on most typical spam shenanigans, though you might want additional services or the replacement of the OS X Server mail server with the mail package from Kerio.

G3 (blue one) OSX server 10.2

Similar Messages

Maybe you are looking for