G33M - Computer ho down for 3 times before the MSI screen on startup

Hi!
I have this problem from 1 week ago!
When i turn on my pc it is on and after 3 seconds it turn off and it restart and for 3 times do this! after the last times appears the allert that says me "Warring fails to load overlocking configuration, load standard config....press any key except del to enter the setup"
i press a specebar and i enter on the setep menu, when i select save and exit the pc restart again and i have the same problem, but if i select dont save and exit winXp start!
What can i do?? i never overclocking my pc!

Quote from: adrianoaca on 29-January-09, 02:48:34
uhmmm i understand!
But now what can i do? and why my PSU is unstable?
if i dont change the PSU my mobo or a any part of my pc can break? ???
because today morning my regulary tunr on and this evening the same, tomorrow i hope that all it is same
We would really like to give you a clear direction of what you should do, however, please let us have the PSU specs amp information as soon as possible.
It is really not good for your system to restart so many times in a short interval as the capacitors need to charge up fully everytime to run the system, so if the charge is not enough for the initial startup boost, the capacitors may be easily spoilt by this cause.

Similar Messages

At times when dragging the vertical scroll bar my computer screen oscillates up and down for some time before going blank or not responding to any clicks requiring a forced system restart. What is wrong?

Hi,
Suddenly while working with Firefox if I happen to drag the vertical scroll bar, a very abnormal behavior occurs. My screen dances up and down for a short time before either going black or getting restored but with no clicks working. The only way to resume is to force a restart of the system.
Any help would be deeply appreciated.
Thanks and Regards
Deepak

That didn't work. On trying to install a new driver I got the error the graphics driver could not find compatible graphics hardware. Is there anything else that can be done to at least prevent the hanging of the computer even if it means less features from Firefox being available?

IMac (2011) white screen for long time before loading

Hello everyone,
When i powered on my iMac yesterday I got the white screen (before the white screen with the grey Apple logo) for a very long time (app. 4-5 min.) before loading the white screen with the grey Apple logo and eventually starting up my dekstop.
Also the wireless bluetooth mouse and keyboard kept on searching for connection, unsuccesfully - so I pluggend in a cabled keyboard and mouse.
So far so good.
I chose to make a clean installation of Mavericks OS X (which was also the current OS X), hoping this would put a end to the long loading time when powering up the computer. However this didn't do any good, and I still get the long loading time with the blank white screen, and no succesfull connection between bluetooth mouse+keyboard and the computer.
Does anyone recognize this issue, and how should I deal with it?
The harddrive is a 1TB SATA, and I never had similar issues with the machine.
The clean install of Mavericks was done after erasing the harddrive, through disc utilities.
I feel very confused about this issue, and can't no longer find any alternative solutions to solve it.
Hoping for your advice and kind help

True :-)
I pressed D upon startup and was able to launch the disc utility.
Tried to Google for people with the same problem, but didnt get any decent answer.
I am thinking some component must be broken, either the HDD or RAM?

Cannot open your default e-mail folder. Microsoft Exchange is not available. Either there are network problems or the Exchange computer is down for maintenance

Windows Server 2012 R1 with Exchange 2013 SP1
Windows XP SP3 with Outlook 2010 (14.0.4760.1000) computer is on the same network, but not a part of the domain.
When I try to configure Outlook profile for the user, I manually enter exchange server name and user name.
Check User button underlines server name and user name and profile gets created successfully.
Once I try to open outlook for the user I get
Cannot open your default e-mail folder. Microsoft Exchange is not available. Either there are network problems or the Exchange computer is down for maintenance
If I search the content of the log files under
X:\Program Files\Microsoft\Exchange Server\V15\Logging\RPC Client Access
I can’t find any records indicating a connection attempt from the client’s IP or references to the version of the outlook used, however I can see a 3 way handshake followed by a 4 RCP packets and then 4 nspi bind requests and responses when outlook opens
up and then connection is torn down.

Windows Server 2012 R1 with Exchange 2013 SP1
Windows XP SP3 with Outlook 2010 (14.0.4760.1000) computer is on the same network, but not a part of the domain.
Hi,
That version of Outlook 2010 (14.0.4760.1000) is not supported with Exchange 2013 and will not be able to connect. It need to be on at least SP1 +
Outlook 2010 November 2012 update (14.0.6126.5000)
See: Exchange 2013 System Requirements -
Client Support
Martina Miskovic

Eth0 is being up and down for several time during boot

My wicd doesn't connect to eth0 on the first attempt after boot up. It is configured to eth0 always have a higher priority to connect.
My dmesg shows that eth0 being up and down for several time during boot. I have e1000e in my MODULES list.
Here is my rc.conf
# /etc/rc.conf - Main Configuration for Arch Linux
# LOCALIZATION
# LOCALE: available languages can be listed with the 'locale -a' command
# DAEMON_LOCALE: If set to 'yes', use $LOCALE as the locale during daemon
# startup and during the boot process. If set to 'no', the C locale is used.
# HARDWARECLOCK: set to "", "UTC" or "localtime", any other value will result
# in the hardware clock being left untouched (useful for virtualization)
# Note: Using "localtime" is discouraged, using "" makes hwclock fall back
# to the value in /var/lib/hwclock/adjfile
# TIMEZONE: timezones are found in /usr/share/zoneinfo
# Note: if unset, the value in /etc/localtime is used unchanged
# KEYMAP: keymaps are found in /usr/share/kbd/keymaps
# CONSOLEFONT: found in /usr/share/kbd/consolefonts (only needed for non-US)
# CONSOLEMAP: found in /usr/share/kbd/consoletrans
# USECOLOR: use ANSI color sequences in startup messages
LOCALE="en_US.UTF-8"
DAEMON_LOCALE="no"
HARDWARECLOCK=""
TIMEZONE="Asia/Hong_Kong"
KEYMAP="us"
CONSOLEFONT=
CONSOLEMAP=
USECOLOR="yes"
# HARDWARE
# MODULES: Modules to load at boot-up. Blacklisting is no longer supported.
# Replace every !module by an entry as on the following line in a file in
# /etc/modprobe.d:
# blacklist module
# See "man modprobe.conf" for details.
MOD_AUTOLOAD="yes"
MODULES=(acpi-cpufreq fuse tp_smapi vboxdrv e1000e)
# Udev settle timeout (default to 30)
UDEV_TIMEOUT=30
# Scan for FakeRAID (dmraid) Volumes at startup
USEDMRAID="no"
# Scan for BTRFS volumes at startup
USEBTRFS="no"
# Scan for LVM volume groups at startup, required if you use LVM
USELVM="no"
# NETWORKING
# HOSTNAME: Hostname of machine. Should also be put in /etc/hosts
HOSTNAME="antony-tp"
# Use 'ip addr' or 'ls /sys/class/net/' to see all available interfaces.
# Wired network setup
# - interface: name of device (required)
# - address: IP address (leave blank for DHCP)
# - netmask: subnet mask (ignored for DHCP) (optional, defaults to 255.255.255.0)
# - broadcast: broadcast address (ignored for DHCP) (optional)
# - gateway: default route (ignored for DHCP)
# Static IP example
# interface=eth0
# address=192.168.0.2
# netmask=255.255.255.0
# broadcast=192.168.0.255
# gateway=192.168.0.1
# DHCP example
# interface=eth0
# address=
# netmask=
# gateway=
# Setting this to "yes" will skip network shutdown.
# This is required if your root device is on NFS.
NETWORK_PERSIST="yes"
# Enable these netcfg profiles at boot-up. These are useful if you happen to
# need more advanced network features than the simple network service
# supports, such as multiple network configurations (ie, laptop users)
# - set to 'menu' to present a menu during boot-up (dialog package required)
# - prefix an entry with a ! to disable it
# Network profiles are found in /etc/network.d
# This requires the netcfg package
#NETWORKS=(main)
# DAEMONS
# Daemons to start at boot-up (in this order)
# - prefix a daemon with a ! to disable it
# - prefix a daemon with a @ to start it up in the background
# If something other takes care of your hardware clock (ntpd, dual-boot...)
# you should disable 'hwclock' here.
DAEMONS=(!hwclock syslog-ng dbus !network !dhcpcd rpcbind acpid @wicd nfs-common netfs @crond cups @laptop-mode @alsa @sensors ntpd @slim bluetooth)
Here is a segment of my dmesg
[ 2.759302] e1000e: Intel(R) PRO/1000 Network Driver - 1.5.1-k
[ 2.759304] e1000e: Copyright(c) 1999 - 2011 Intel Corporation.
[ 2.759338] e1000e 0000:00:19.0: PCI INT A -> GSI 20 (level, low) -> IRQ 20
[ 2.759348] e1000e 0000:00:19.0: setting latency timer to 64
[ 2.759467] e1000e 0000:00:19.0: irq 48 for MSI/MSI-X
[ 2.766107] tpm_tis 00:0a: 1.2 TPM (device-id 0x0, rev-id 78)
[ 2.766808] ACPI: AC Adapter [AC] (on-line)
[ 2.776492] wmi: Mapper loaded
[ 2.777212] mei: module is from the staging directory, the quality is unknown, you have been warned.
[ 2.777781] thermal LNXTHERM:00: registered as thermal_zone0
[ 2.777783] ACPI: Thermal Zone [THM0] (66 C)
[ 2.778291] iTCO_vendor_support: vendor-support=0
[ 2.780137] ACPI: Battery Slot [BAT0] (battery present)
[ 2.780958] input: PC Speaker as /devices/platform/pcspkr/input/input4
[ 2.781462] iTCO_wdt: Intel TCO WatchDog Timer Driver v1.07
[ 2.781547] iTCO_wdt: Found a Cougar Point TCO device (Version=2, TCOBASE=0x0460)
[ 2.781919] iTCO_wdt: initialized. heartbeat=30 sec (nowayout=0)
[ 2.783139] cfg80211: Calling CRDA to update world regulatory domain
[ 2.789182] [drm] Initialized drm 1.1.0 20060810
[ 2.789538] hub 4-1:1.0: USB hub found
[ 2.789616] hub 4-1:1.0: 8 ports detected
[ 2.792925] Non-volatile memory driver v1.3
[ 2.795877] thinkpad_acpi: ThinkPad ACPI Extras v0.24
[ 2.795879] thinkpad_acpi: http://ibm-acpi.sf.net/
[ 2.795881] thinkpad_acpi: ThinkPad BIOS 8DET54WW (1.24 ), EC unknown
[ 2.795882] thinkpad_acpi: Lenovo ThinkPad X220, model 4290NL5
[ 2.797236] thinkpad_acpi: detected a 8-level brightness capable ThinkPad
[ 2.797352] thinkpad_acpi: radio switch found; radios are enabled
[ 2.797466] thinkpad_acpi: possible tablet mode switch found; ThinkPad in laptop mode
[ 2.799752] thinkpad_acpi: rfkill switch tpacpi_bluetooth_sw: radio is unblocked
[ 2.800067] Registered led device: tpacpi::thinklight
[ 2.800091] Registered led device: tpacpi::power
[ 2.800106] Registered led device: tpacpi::standby
[ 2.800120] Registered led device: tpacpi::thinkvantage
[ 2.800192] thinkpad_acpi: Standard ACPI backlight interface available, not loading native one
[ 2.800254] thinkpad_acpi: Console audio control enabled, mode: monitor (read only)
[ 2.801077] input: ThinkPad Extra Buttons as /devices/platform/thinkpad_acpi/input/input5
[ 2.801162] sdhci: Secure Digital Host Controller Interface driver
[ 2.801164] sdhci: Copyright(c) Pierre Ossman
[ 2.801707] Intel(R) Wireless WiFi Link AGN driver for Linux, in-tree:
[ 2.801709] Copyright(c) 2003-2011 Intel Corporation
[ 2.801744] iwlwifi 0000:03:00.0: PCI INT A -> GSI 17 (level, low) -> IRQ 17
[ 2.801753] iwlwifi 0000:03:00.0: setting latency timer to 64
[ 2.801789] iwlwifi 0000:03:00.0: pci_resource_len = 0x00002000
[ 2.801791] iwlwifi 0000:03:00.0: pci_resource_base = ffffc90005abc000
[ 2.801793] iwlwifi 0000:03:00.0: HW Revision ID = 0x34
[ 2.801877] iwlwifi 0000:03:00.0: irq 49 for MSI/MSI-X
[ 2.801913] iwlwifi 0000:03:00.0: Detected Intel(R) Centrino(R) Advanced-N 6205 AGN, REV=0xB0
[ 2.801962] iwlwifi 0000:03:00.0: L1 Disabled; Enabling L0S
[ 2.802045] sdhci-pci 0000:0d:00.0: SDHCI controller found [1180:e822] (rev 7)
[ 2.802067] sdhci-pci 0000:0d:00.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16
[ 2.802107] sdhci-pci 0000:0d:00.0: setting latency timer to 64
[ 2.802118] _regulator_get: 0000:0d:00.0 supply vmmc not found, using dummy regulator
[ 2.802188] Registered led device: mmc0::
[ 2.803329] mmc0: SDHCI controller on PCI [0000:0d:00.0] using DMA
[ 2.815226] iwlwifi 0000:03:00.0: device EEPROM VER=0x715, CALIB=0x6
[ 2.815229] iwlwifi 0000:03:00.0: Device SKU: 0X1f0
[ 2.815231] iwlwifi 0000:03:00.0: Valid Tx ant: 0X3, Valid Rx ant: 0X3
[ 2.815247] iwlwifi 0000:03:00.0: Tunable channels: 13 802.11bg, 24 802.11a channels
[ 2.845674] iwlwifi 0000:03:00.0: loaded firmware version 17.168.5.3 build 42301
[ 2.845820] Registered led device: phy0-led
[ 2.850630] ieee80211 phy0: Selected rate control algorithm 'iwl-agn-rs'
[ 2.862431] usb 1-1.2: new low-speed USB device number 3 using ehci_hcd
[ 2.943648] e1000e 0000:00:19.0: eth0: (PCI Express:2.5GT/s:Width x1) f0:de:f1:92:77:26
[ 2.943651] e1000e 0000:00:19.0: eth0: Intel(R) PRO/1000 Network Connection
[ 2.943712] e1000e 0000:00:19.0: eth0: MAC: 10, PHY: 11, PBA No: 1000FF-0FF
[ 2.943734] mei 0000:00:16.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16
[ 2.943739] mei 0000:00:16.0: setting latency timer to 64
[ 2.943817] mei 0000:00:16.0: irq 50 for MSI/MSI-X
[ 2.944502] agpgart-intel 0000:00:00.0: Intel Sandybridge Chipset
[ 2.945021] agpgart-intel 0000:00:00.0: detected gtt size: 2097152K total, 262144K mappable
[ 2.946341] watchdog: INTCAMT: cannot register miscdev on minor=130 (err=-16).
[ 2.946452] watchdog: error registering /dev/watchdog (err=-16).
[ 2.946523] mei: unable to register watchdog device.
[ 2.946598] agpgart-intel 0000:00:00.0: detected 65536K stolen memory
[ 2.946692] agpgart-intel 0000:00:00.0: AGP aperture is 256M @ 0xe0000000
[ 2.946734] i801_smbus 0000:00:1f.3: PCI INT C -> GSI 18 (level, low) -> IRQ 18
[ 2.948359] snd_hda_intel 0000:00:1b.0: PCI INT A -> GSI 22 (level, low) -> IRQ 22
[ 2.948422] snd_hda_intel 0000:00:1b.0: irq 51 for MSI/MSI-X
[ 2.948444] snd_hda_intel 0000:00:1b.0: setting latency timer to 64
[ 3.022245] usb 1-1.3: new full-speed USB device number 4 using ehci_hcd
[ 3.172080] usb 1-1.4: new full-speed USB device number 5 using ehci_hcd
[ 3.274597] Bluetooth: Core ver 2.16
[ 3.274611] NET: Registered protocol family 31
[ 3.274612] Bluetooth: HCI device and connection manager initialized
[ 3.274614] Bluetooth: HCI socket layer initialized
[ 3.274614] Bluetooth: L2CAP socket layer initialized
[ 3.274618] Bluetooth: SCO socket layer initialized
[ 3.275535] Bluetooth: Generic Bluetooth USB driver ver 0.6
[ 3.276006] usbcore: registered new interface driver btusb
[ 3.338454] usb 1-1.6: new high-speed USB device number 6 using ehci_hcd
[ 3.444567] Linux media interface: v0.10
[ 3.447387] Linux video capture interface: v2.00
[ 3.448573] input: Logitech Trackball as /devices/pci0000:00/0000:00:1a.0/usb1/1-1/1-1.2/1-1.2:1.0/input/input6
[ 3.448671] generic-usb 0003:046D:C404.0001: input,hidraw0: USB HID v1.10 Mouse [Logitech Trackball] on usb-0000:00:1a.0-1.2/input0
[ 3.448690] usbcore: registered new interface driver usbhid
[ 3.448691] usbhid: USB HID core driver
[ 3.449136] uvcvideo: Found UVC 1.00 device Integrated Camera (04f2:b217)
[ 3.450945] input: Integrated Camera as /devices/pci0000:00/0000:00:1a.0/usb1/1-1/1-1.6/1-1.6:1.0/input/input7
[ 3.450987] usbcore: registered new interface driver uvcvideo
[ 3.450988] USB Video Class driver (1.1.1)
[ 3.484049] input: HDA Digital PCBeep as /devices/pci0000:00/0000:00:1b.0/input/input8
[ 3.491137] HDMI status: Codec=3 Pin=5 Presence_Detect=0 ELD_Valid=0
[ 3.491298] HDMI status: Codec=3 Pin=6 Presence_Detect=0 ELD_Valid=0
[ 3.491486] HDMI status: Codec=3 Pin=7 Presence_Detect=0 ELD_Valid=0
[ 3.491637] input: HDA Intel PCH HDMI/DP,pcm=8 as /devices/pci0000:00/0000:00:1b.0/sound/card0/input9
[ 3.491709] input: HDA Intel PCH HDMI/DP,pcm=7 as /devices/pci0000:00/0000:00:1b.0/sound/card0/input10
[ 3.491765] input: HDA Intel PCH HDMI/DP,pcm=3 as /devices/pci0000:00/0000:00:1b.0/sound/card0/input11
[ 3.492050] i915 0000:00:02.0: power state changed by ACPI to D0
[ 3.492053] i915 0000:00:02.0: power state changed by ACPI to D0
[ 3.492059] i915 0000:00:02.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16
[ 3.492062] i915 0000:00:02.0: setting latency timer to 64
[ 3.538056] mtrr: no more MTRRs available
[ 3.538058] [drm] MTRR allocation failed. Graphics performance may suffer.
[ 3.538266] i915 0000:00:02.0: irq 52 for MSI/MSI-X
[ 3.538270] [drm] Supports vblank timestamp caching Rev 1 (10.10.2010).
[ 3.538271] [drm] Driver supports precise vblank timestamp query.
[ 3.538292] vgaarb: device changed decodes: PCI:0000:00:02.0,olddecodes=io+mem,decodes=io+mem:owns=io+mem
[ 3.664501] psmouse serio1: synaptics: Touchpad model: 1, fw: 8.0, id: 0x1e2b1, caps: 0xd001a3/0x940300/0x120c00
[ 3.664518] psmouse serio1: synaptics: serio: Synaptics pass-through port at isa0060/serio1/input0
[ 3.716317] input: SynPS/2 Synaptics TouchPad as /devices/platform/i8042/serio1/input/input12
[ 4.407165] fbcon: inteldrmfb (fb0) is primary device
[ 4.575259] Console: switching to colour frame buffer device 170x48
[ 4.577042] fb0: inteldrmfb frame buffer device
[ 4.577043] drm: registered panic notifier
[ 4.607860] acpi device:01: registered as cooling_device4
[ 4.607985] input: Video Bus as /devices/LNXSYSTM:00/device:00/PNP0A08:00/LNXVIDEO:00/input/input13
[ 4.608039] ACPI: Video Device [VID] (multi-head: yes rom: no post: no)
[ 4.608122] [drm] Initialized i915 1.6.0 20080730 for 0000:00:02.0 on minor 0
[ 4.757243] EXT4-fs (sda3): re-mounted. Opts: discard
[ 4.765917] EXT4-fs (sda4): mounted filesystem with ordered data mode. Opts: discard
[ 4.776777] Adding 262140k swap on /dev/sda2. Priority:-1 extents:1 across:262140k SS
[ 5.099467] NET: Registered protocol family 10
[ 6.048650] Bluetooth: BNEP (Ethernet Emulation) ver 1.3
[ 6.098038] Bluetooth: RFCOMM TTY layer initialized
[ 6.098055] Bluetooth: RFCOMM socket layer initialized
[ 6.098057] Bluetooth: RFCOMM ver 1.11
[ 6.278766] iwlwifi 0000:03:00.0: L1 Disabled; Enabling L0S
[ 6.278893] iwlwifi 0000:03:00.0: Radio type=0x1-0x2-0x0
[ 6.568639] iwlwifi 0000:03:00.0: L1 Disabled; Enabling L0S
[ 6.568775] iwlwifi 0000:03:00.0: Radio type=0x1-0x2-0x0
[ 6.684082] ADDRCONF(NETDEV_UP): wlan0: link is not ready
[ 7.176563] e1000e 0000:00:19.0: irq 48 for MSI/MSI-X
[ 7.226662] e1000e 0000:00:19.0: irq 48 for MSI/MSI-X
[ 7.227110] ADDRCONF(NETDEV_UP): eth0: link is not ready
[ 10.229345] IBM TrackPoint firmware: 0x0e, buttons: 3/3
[ 10.490618] input: TPPS/2 IBM TrackPoint as /devices/platform/i8042/serio1/serio2/input/input14
[ 10.817814] e1000e: eth0 NIC Link is Up 1000 Mbps Full Duplex, Flow Control: Rx/Tx
[ 10.819315] ADDRCONF(NETDEV_CHANGE): eth0: link becomes ready
[ 11.186166] iwlwifi 0000:03:00.0: L1 Disabled; Enabling L0S
[ 11.186292] iwlwifi 0000:03:00.0: Radio type=0x1-0x2-0x0
[ 11.313367] ADDRCONF(NETDEV_UP): wlan0: link is not ready
[ 11.665342] e1000e 0000:00:19.0: irq 48 for MSI/MSI-X
[ 11.717591] e1000e 0000:00:19.0: irq 48 for MSI/MSI-X
[ 11.718042] ADDRCONF(NETDEV_UP): eth0: link is not ready
[ 11.964795] e1000e 0000:00:19.0: irq 48 for MSI/MSI-X
[ 12.017213] e1000e 0000:00:19.0: irq 48 for MSI/MSI-X
[ 12.017720] ADDRCONF(NETDEV_UP): eth0: link is not ready
[ 13.811264] EXT4-fs (sda3): re-mounted. Opts: discard,commit=0
[ 13.826031] EXT4-fs (sda4): re-mounted. Opts: discard,commit=0
[ 15.178905] e1000e: eth0 NIC Link is Up 1000 Mbps Full Duplex, Flow Control: Rx/Tx
[ 15.180472] ADDRCONF(NETDEV_CHANGE): eth0: link becomes ready
[ 25.663056] eth0: no IPv6 routers present
Any hint for tracing the root of this problem? Thank you very much!

Hi ...
If you have moved the Safari application from the Applications folder, move it back.
As far as the cache goes, there's a work around for that when you can't empty the Safari cache from the menu bar.
Go to ~/Library/Caches/com.aple.Safari.Cache.db. Move the Cache.db file to the Trash.
Try Safari.
Mac OS X (10.7.2) < from your profile
If that is corrrect, you need to update your system software. Click your Apple menu icon top left in your screen. From the drop down menu click Software
Update ...
~ (Tilde) character represents the Home folder.
For Lion v10.7x: To find the Home folder in OS X Lion, open the Finder, hold the Option key, and choose Go > Library

Apple TV 2 is asking for network time before I can purchase a movie? Restarted it and still requesting network time. Wifi is connected and works. Any ideas?

Apple TV 2 is asking for network time before I can purchase a movie? Even restarted it and still did the same thing.
How do you fix this? My wifi is operating 100% connected and I can access the Itunes Movies etc. How do I get it to work again?

Welcome to the Apple Community.
If you've had it working previously, try restarting the Apple TV by removing ALL the cables for a 30 seconds, or a restore if the problem persists.

RMBP: Sometimes, after having been shut down, i have to press the power button several times before the machine starts up. It's 3 weeks old, and this has happened 2 times now. Is there something wrong with my rMBP?

rMBP: Sometimes, after having been shut down, i have to press the power button several times before the machine starts up. It's 3 weeks old, and this has happened 2 times now. Is there something wrong with my rMBP?

Did you purchase the Mac new?
You have 14 calendar days from the time your items are delivered to initiate a return as noted here.
Even though you are past the 14 day limit, if it were me, I'd take the Mac back and explain what's going on. Your Mac should work out of the box.
message edited by: cs

Is there an icon for face time on the iphone4s home screen? I remember I saw it before but not any more. I still have the FaceTime app,but would like to find the icon on the home screen again. Anyone can help?

Is there an icon for face time on the iphone4s home screen? I remember I saw it before but not any more. I still have the FaceTime app,but would like to find the icon on the home screen again. Anyone can help?

Check all of your folders to see if FaceTime is in any of them.
If not, check your restrictions (Settings>General>Restrictions) and if restrictions are on, and you know the passcode, then FaceTime might be turned off. Turn ON to veiw icon on home screen.
Let me know if this does/doesnt work.

Is it okay if we never shut down and just make the computer to sleep or we just put the flap(screen) to save the energy?

is it okay if we never shut down and just make the computer to sleep or we just put the flap(screen) to save the energy?

I recommend users to put their computers into sleep mode to save energy, and also, they won't waste time turning on their computers. You should only turn off your computer if you aren't going to use it for a very long time, but sleep mode is perfect. If you just turn off the display, your computer will still be working, so you mustn't do this unless you are going to use your computer in a short time

E_IO_CANNOT_OPEN error message. Get this 1-2 times before the book downloads to ADE3.0. Why?

E_IO_CANNOT_OPEN error message. Often get this 1-2 times before the book downloads to ADE3.0. Why?

Hi,
So I've fixed the activation error, but when trying to get an ebook from the sample site I'm now getting "LICENSE_SIGN_ERROR." And I'm still getting the license error (CANNOT_OPEN) when trying to download library books, no matter how many times I de/reauthorize ADE, restart the computer and the program, and try to dl the book from the library website.
Thanks for any additional advice!
Edit, a few days later - still experiencing the problem, no matter how many times I try to download the library book I get the same error. Any ideas? Thanks @shreya

My computer shuts down after about two minutes of use or at startup. What is the problem?

My computer shuts down after about two minutes of use or at startup. What is the problem?
Yesterday I used it for about ten minutes.
Yesterday was the first time using it after about 5 days.

Could you tell me how to check my system log, and how to tell if it is the disk cache? I am pretty sure it is not the GPU as I was having the problem using a Quadro 4000 as well.
Thanks!

When I restart my computer instead of the gray screen that is supposed to appear before the login screen it shows a screen with a lot of letter

I upgrade my ssd for my macbook pro retina from the 256 to 480 GB but when I tunr it on or restarted the computer the gray screen that is suppost to apper dosent show insted a screen with lettler show before the login screen besides that the computer works fine.

I cannot decipher what is written on the images you have posted but they are reminiscent of what I have seen when a MBP is dealing with some totally incompatible software or perhaps in your case hardware.
How and or who installed the larger SSD and what manufacture is it. I suspect that is the problem.
Ciao.

Lately I have been getting a rectangular screen titled Login Setting, with my Username and Password and asking me to Login. This screen shows up on opening the computer and has never been seen before the last month or so.

Lately I have been getting a rectangular screen titled Login Setting, with my Username and Password and asking me to Login. This screen shows up on opening the computer and has never been seen before the last month or so. It has one box titled Login Credentials with a username and password field and a second box titled Login Status at the bottom where it says "Profile not found" in red. I've never seen this before and ignoring it does not effect any operations. Is this legitimate or some kind of identity fishing?

Hello,
Have you done the recent Security updates?
Is this from Sleep or on bootup?
Timing is about right for the FlashBack attack.
Disable Java in your Browser settings, not JavaScript.
http://support.apple.com/kb/HT5241?viewlocale=en_US
http://support.google.com/chrome/bin/answer.py?hl=en-GB&answer=142064
http://support.mozilla.org/en-US/kb/How%20to%20turn%20off%20Java%20applets
Flashback - Detect and remove the uprising Mac OS X Trojan...
http://www.mac-and-i.net/2012/04/flashback-detect-and-remove-uprising.html
In order to avoid detection, the installer will first look for the presence of some antivirus tools and other utilities that might be present on a power user's system, which according to F-Secure include the following:
/Library/Little Snitch
/Developer/Applications/Xcode.app/Contents/MacOS/Xcode
/Applications/VirusBarrier X6.app
/Applications/iAntiVirus/iAntiVirus.app
/Applications/avast!.app
/Applications/ClamXav.app
/Applications/HTTPScoop.app
/Applications/Packet Peeper.app
If these tools are found, then the malware deletes itself in an attempt to prevent detection by those who have the means and capability to do so. Many malware programs use this behavior, as was seen in others such as the Tsunami malware bot.
http://reviews.cnet.com/8301-13727_7-57410096-263/how-to-remove-the-flashback-ma lware-from-os-x/
http://x704.net/bbs/viewtopic.php?f=8&t=5844&p=70660#p70660
The most current flashback removal instructions are F-Secure's Trojan-Downloader:OSX/Flashback.K.
https://www.securelist.com/en/blog/208193454/Flashfake_Removal_Tool_and_online_c hecking_site
More bad news...
https://www.securelist.com/en/blog/208193467/SabPub_Mac_OS_X_Backdoor_Java_Explo its_Targeted_Attacks_and_Possible_APT_link

Recovery to a time before the last resetlog issue

Hi experts!
Env: 11.2.0.2 including a 11.2.0.2 RMAN recovery catalog.
Having big trouble understanding what is happening here.. I'm trying to return my database to a time before the last resetlogs time, but cannot as RMAN always gives "RMAN-20011: target database incarnation is not current in recovery catalog". And yes, I've reset database to previous incarnation.
[oracle@targetdb backup]$ rman
Recovery Manager: Release 11.2.0.2.0 - Production on Wed May 15 22:01:39 2013
Copyright (c) 1982, 2009, Oracle and/or its affiliates. All rights reserved.
RMAN> connect target
connected to target database: TRGDB (not mounted)
RMAN> connect catalog rman/rman@rmancat
connected to recovery catalog database
List of Database Incarnations
DB Key Inc Key DB Name DB ID            STATUS Reset SCN Reset Time
1       15      TRGDB    1659522178       PARENT 1          13.08.2012 06:51:46
1       16      TRGDB    1659522178       ORPHAN 765647     31.10.2012 07:47:00
1       17      TRGDB    1659522178       PARENT 765821     31.10.2012 07:53:07
1       18      TRGDB    1659522178       PARENT 815390     05.11.2012 14:41:39
1       19      TRGDB    1659522178       PARENT 816252     05.11.2012 15:05:16
1       2       TRGDB    1659522178       PARENT 1825516    24.04.2013 21:33:32
1       523     TRGDB    1659522178       PARENT 2127837    13.05.2013 13:24:51
1       521     TRGDB    1659522178       PARENT 2181465    14.05.2013 08:57:42
1       1154    TRGDB    1659522178       CURRENT 2257381    15.05.2013 21:32:08
RMAN> reset database to incarnation 521;
database reset to incarnation 521
RMAN> restore controlfile from '/home/oracle/backup/c-1659522178-20130515-00';
Starting restore at 15.05.2013 21:50:54
allocated channel: ORA_DISK_1
channel ORA_DISK_1: SID=10 device type=DISK
channel ORA_DISK_1: restoring control file
channel ORA_DISK_1: restore complete, elapsed time: 00:00:01
output file name=/home/oracle/oradata/TRGDB/controlfile/o1_mf_82l1ml9w_.ctl
output file name=/home/oracle/oradata/fast_recovery_area/TRGDB/controlfile/o1_mf_82l1mljs_.ctl
Finished restore at 15.05.2013 21:50:55
RMAN> sql "alter database mount";
sql statement: alter database mount
released channel: ORA_DISK_1
RMAN> run
2> {
3> set until time "to_date('15-05-2013 20:15:00','dd-mm-yyyy hh24:mi:ss')";
4> restore database;
5> recover database;
6> }
executing command: SET until clause
Starting restore at 15.05.2013 21:52:07
Starting implicit crosscheck backup at 15.05.2013 21:52:07
allocated channel: ORA_DISK_1
channel ORA_DISK_1: SID=12 device type=DISK
Crosschecked 12 objects
Finished implicit crosscheck backup at 15.05.2013 21:52:09
Starting implicit crosscheck copy at 15.05.2013 21:52:09
using channel ORA_DISK_1
Finished implicit crosscheck copy at 15.05.2013 21:52:09
searching for all files in the recovery area
cataloging files...
cataloging done
List of Cataloged Files
=======================
File Name: /home/oracle/oradata/fast_recovery_area/TRGDB/archivelog/2013_05_15/o1_mf_1_15_8s7rosfg_.arc
File Name: /home/oracle/oradata/fast_recovery_area/TRGDB/archivelog/2013_05_15/o1_mf_1_16_8s7rosg0_.arc
File Name: /home/oracle/oradata/fast_recovery_area/TRGDB/archivelog/2013_05_15/o1_mf_1_1_8s7rp9st_.arc
File Name: /home/oracle/oradata/fast_recovery_area/TRGDB/archivelog/2013_05_15/o1_mf_1_2_8s7rp9lt_.arc
File Name: /home/oracle/oradata/fast_recovery_area/TRGDB/archivelog/2013_05_15/o1_mf_1_17_8s7rorkn_.arc
File Name: /home/oracle/oradata/fast_recovery_area/TRGDB/archivelog/2013_05_15/o1_mf_1_14_8s7rory4_.arc
skipping datafile 8; already restored to file /home/oracle/oradata/TRGDB/datafile/o1_mf_aud_trai_8qlfhw19_.dbf
restore not done; all files read only, offline, or already restored
Finished restore at 15.05.2013 21:52:11
Starting recover at 15.05.2013 21:52:11
using channel ORA_DISK_1
RMAN-00571: ===========================================================
RMAN-00569: =============== ERROR MESSAGE STACK FOLLOWS ===============
RMAN-00571: ===========================================================
RMAN-03002: failure of recover command at 05/15/2013 21:52:11
RMAN-06004: ORACLE error from recovery catalog database: RMAN-20011: target database incarnation is not current in recovery catalogThe controlfile I restored above ('/home/oracle/backup/c-1659522178-20130515-00') is from before the last resetlogs.
Also I notice in the alert log during "searching for all files in the recovery area.."
Wed May 15 21:52:09 2013
Setting recovery target incarnation to 9
Setting recovery target incarnation to 9It seems to me that RMAN "ups" the incarnation back to the CURRENT one (the one before I ran reset incarnation command).
But why?
I'm obviously doing something wrong here, please shed some expert enlightment.
Thanks!

Hello;
Been awhile, probably time for me to test this again. Here's what I think :
The database with the DBID (1659522178) and DBINC_KEY (521) has to be reset in the recovery catalog and re-registered for its backups to resume.
RMAN> reset database to incarnation 521;
database reset to incarnation 521
RMAN> register database;In my way old notes I do :
RMAN> connect target sys/sys
RMAN> startup nomount
RMAN> restore controlfile from'....
RMAN> Alter database mount
RMAN> reset database to incarnationSo use target database controlfile instead of recovery catalog
Best Regards
mseberg
Edited by: mseberg on May 15, 2013 6:12 PM

When I upgraded my iMac to Lion I can no longer connect the iPad 2 to WiFi. It gives me a message unable to search for WiFi. Before the upgrade to Lion it worked fine. What gives?

When I upgraded my iMac to Lion I can no longer connect the iPad 2 to WiFi. It gives me a message unable to search for WiFi. Before the upgrade to Lion it worked fine. What gives?

Could there be a setting I need to adjust in the iPad2? When I try to turn on WiFi and enter the name of the WiFi that I have established, including the security type and the password, I get the message "Could not scan for wireless networks." Is there a setting in iCloud or other location that needs to be changed?

G33M - Computer ho down for 3 times before the MSI screen on startup

Similar Messages

Maybe you are looking for