G4 17 Display dead 4th time
I just got my PB G4 17 back from Apple repair on Friday for 2nd Display and logic board and it's dead again on Thurs.
PowerBook G4 17 Mac OS X (10.3.7)
PowerBook G4 17 Mac OS X (10.4.6)
I find you need to have the external display connected and ON when you start the computer. That way, the computer polls the display and defects its possible resolutions. Also, the monitor need MultiSync technology. Many older monitors intended for PCs don't have that ability.
Similar Messages
-
How can I display the elapsed time of the course using Advanced Actions in Captivate?
I have a Captivate course which is approximately 35 minutes in length. On each slide I would like to display to the user, the current elapsed time.
EXAMPLE:
25/35 minutes complete
The 35 would remain static, so I have been working with the elapsed time system variable in CP: elapsed:$$cpInfoElapsedTimeMS$$
I can't seem to get the variable to properly display the elapsed time in minutes, rather than miliseconds. Attached is a screen shot of my advanced action.
Can anyone provide guidence regarding how I should structure this differntly?I talked about that Timer widget in that blog post and pointed to another one:
http://blog.lilybiri.com/timer-widget-to-stress-your-learners
If you are on CP7, you'll have this widget also as an interaction, which means it is compatible with HTML5 output. Amd there is also an hourglass interaction, with similar functionality but... did not blog about that one
PS: Check Gallery\Widgets to find all widgets. Default path is set to Interactions -
I have a MacBook OSX 10.5.8 and a Time Capsule 500GB since July 2008. My problem is (for the 4th time in 4 yrs) the backup gets stuck in "preparing" indefinitely (hours). In the past, wile still under apple care warranty, tech support had me redo backup (loosing previous backups). Now I'm out of warranty and still having this problem. Any help is greatly appreciated.
I have a MacBook OSX 10.5.8 and a Time Capsule 500GB since July 2008. My problem is (for the 4th time in 4 yrs) the backup gets stuck in "preparing" indefinitely (hours). In the past, wile still under apple care warranty, tech support had me redo backup (loosing previous backups). Now I'm out of warranty and still having this problem. Any help is greatly appreciated.
-
I would like to have my MacPro laptop display and 2 external monitors (three displays). Question, how can I have more than one application displayed at a time? IE: I would like email on one monitor, Finder on my laptop, and iTunes on the other. Possible?
With extended desktop, it appears that I can only have one application presenting at a time. Sort of defeats the purpose of having multiple displays.
I am using the HDMI and the mini HDMI connectors.I would like to have my MacPro laptop display and 2 external monitors (three displays). Question, how can I have more than one application displayed at a time? IE: I would like email on one monitor, Finder on my laptop, and iTunes on the other. Possible?
With extended desktop, it appears that I can only have one application presenting at a time. Sort of defeats the purpose of having multiple displays.
I am using the HDMI and the mini HDMI connectors. -
I am recording with Logic Pro X, using my Yamaha XS8 keyboard as a Midi controller. I also have a Thunderbolt Display. Every time I play and release a note on the keyboard, the Thunderbolt Display speaker emits a doink sound. What is causing it and how do I get it to stop? My sound is running through the Saffire Pro 40 Interface (Focusrite) into external speakers with powered amps.
Also, When I record I am hearing little pops in the system. I have checked all of my meters and they are not clipping. What is causing it and how do I get it to stop?
KenMUYconfundido wrote:
Pancenter,
Thanks for the response, but I do not have a midi interface. I am using a midi to usb connector cable, thus bypassing the need for a Midi interface.
The Mac reads the USB cable as a midi device, but not the keyboard that I am trying to use as a controller. I have tried it with my korg sp 300 and with my Nord Electro 2.
Thoughts?
Thanks,
Tristan
Tristan...
This is what you have, correct?
http://www.alesis.com/usbmidicable
This from Alesis..
"The AudioLink Series USB cable receives and outputs MIDI signal thanks to its internal interface. The USB-MIDI Cable connects plug-and-play to your Mac or PC for an all-in-one USB-MIDI solution."
Notice, -internal interface-. What you have is a simple USB MIDI Interface. Most MIDI interfaces are USB.
My point is (was), MIDI OUT of the Korg goes to the connector marked MIDI IN on the Alesis, those new to MIDI often get this wrong.
pancenter- -
As the title says this is the 4th time iTunes has Crashed for me since 2009. I am at my limit with it and NO I am NOT going to BABY it. It's a program that should be as dependable as it is advertised.
My iTunes .itl library file is constantly becoming damaged without just cause. The -50 warning keeps popping up for NO reason prior to this and through ALL of the Upgrades iTunes has Failed to fix it's issues. I do not use the album art option, I do not use Genius, I don't use any of iTunes flashy bells and whistles. I use the library list and play-list option.
I have over 2k of sorted music and songs and I'm sick and tired of reinstalling them. That's over 30 days worth of music over 12k of songs and over 100 sorted play lists with more than 5+ hours of reinstalling and sorting.
I have a back up drive running. EVERYTHING I do is backed up to it and When Itunes file breaks Guess what? So does the back up. The Good copy is now upgraded to the Damaged one.
I have had nothing but disappointing FAILURES since iTunes upgraded and the icon went from Green to Blue. Whether or not that has anything to do with it I don't know. But there is absolutely No reason for me to be this dissatisfied with a product. Especially for the 4th time "this year".
< Edited by Host >To HOST. I do not know who you are. Regardless I will NOT have you editing my post to "make it pretty". I have a problem. I am a dissatisfied customer. I WILL Get results. I will CALL APPLE if I have to, but I spoke of NO foul language in my prior post. Should I find my words EDITED Again WITHOUT my permission I will go to higher ground.
This is my original Post. DO NOT Edit it. You send a Superior to get in contact with me if YOU have a problem with it.
As the title says this is the 4th time iTunes has Crashed for me since 2009. I am at my limit with it and NO I am NOT going to BABY it. It's a program that should be as dependable as it is advertised.
My iTunes .itl library file is constantly becoming damaged without just cause. The -50 warning keeps popping up for NO reason prior to this and through ALL of the Upgrades iTunes has Failed to fix it's issues. I do not use the album art option, I do not use Genius, I don't use any of iTunes flashy bells and whistles. I use the library list and play-list option.
I have over 2k of sorted music and songs and I'm sick and tired of reinstalling them. That's over 30 days worth of music over 12k of songs and over 100 sorted play lists with more than 5+ hours of reinstalling and sorting.
I WILL NOT have someone come into this thread and tell me I should make a back up file of my itunes library for "just in case" and to just copy paste the good one back in. NO. I have a back up drive running. EVERYTHING I do is backed up to it and When Itunes file breaks Guess what? So does the back up. The Good copy is now upgraded to the Damaged one.
This is a SUPPORT Board Someone better take care of my issue by either requesting my Damaged .itl file and FIXING IT, Or PAY ME to keep my service with Apple. I have had nothing but disappointing FAILURES since iTunes upgraded and the icon went from Green to Blue. Whether or not that has anything to do with it I don't know. But there is absolutely No reason for me to be this dissatisfied with a product. Especially for the 4th time.
Message was edited by: I.D. -
Slider for Display and Control Time of Video
Hey Community,
I run a Video with the IMAQ/ AVI components. Therefor i want to have a timeband as there is one in a normal video player. The Time runs and if I click on the band the video should jump to this moment of the video. Is there a possibility to manage that or do i have to seperate the display of the time and an extra Control to jump to the point of interest?
In the file there is a little example what i mean. (LabView 2010)
Thanks Philipp
Solved!
Go to Solution.
Attachments:
Slider.vi 23 KBHi Philipp,
you could do that by modifying the "Read AVI File Example.vi" (see Screenshot). I also attached the VI saved with "For previous version", I hope that works for you too.
This example uses the "IMAQ AVI2 Read Frame VI" function where you can specify the desired frame. So you only have a control that can modifies the current frame, which is normally incremented every loop iteration.
Best regards,
Christoph
Attachments:
screencapture0.png 84 KB
Read AVI File2.zip 27 KB -
How to display the current time in a UIX page
Hi All,
another UIX question....
A requirement of a customer is to display to current data and time in every page.
It should be done in a <header>. So i'm writing a new (template based) renderer for that element. How can i display the current time and date on it?
Thanks in advance for any help...
Regards,
Robert WillemsHi Robert -
When you say you are writing a template-based Renderer, do you mean that you are creating a custom look and feel and replacing the header Renderer? If so, I'd recommend instead simply creating your own template (not template-based Renderer), and reference your template directly from your uiXML pages where you want to insert the timestamp.
You'll probably want to write a method data provider which calls System.currentTime(), convert the result to a date, and then use Java's date formatting capabilities (see java.text.format.DateFormat) to produce a user presentable String that you can return from your data provider.
For more info (and samples) on templates and data binding, see the "Templates and Data Binding" section of the "Includes and Templating in ADF UIX" help topic:
http://tinyurl.com/5b7bf
Andy -
Displaying Date and Time in portal desktop
Hi
I have been looking around for any info or guideline to display the <b>date and time</b> in the portal desktop. I could not find anything very helpfull. In visual admin you can swap lastname and firtsname and vice versa. Thou there is nothing about displaying date and time.
Is it possible to display it and how?
Thank you for any information
NamiraWhere u need the time to be displayed.. If it has to be displayed in Masterhead you can programatically display it...
import the par file for Masterhead, change it and replace it..
Its a simple JSP page so that u can change it easliy..
cheers
gEorgE -
ICO file not displaying at run time?
Hello Experts,
I an using fusion 11.1.2.1 32 bit. I have Copied the Icons as well as GIF files in C:\Oracle\Middleware\Oracle_FRHome1\forms\java folder.
At button property i set Iconic to yes
and file = addrow
Icon not display at run time.
but when i set file = abc.GIF
image is displaying at run time.
My doubt is that ICO file not displaying at run time while GIF file are displaying.
Do i need to change configuration ?
Please do the needful.
Thanks
YashHi Yash,
First Try this steps
To resolve this issue, follow these steps:
Double-click My Computer, and then click Options on the View menu.
Verify that the Icon file type appears on the File Types tab. If the Icon file type does not appear in the Registered File Types box, skip to step 10.
Click Icon in the Registered File Types box, and then click Edit.
Verify that the following settings exist, and then click OK:
The Description Of Type box contains Icon.
If there is a Confirm Open After Download check box, it should be selected.
If the settings do not appear exactly as listed in step 4, click Remove, click Yes, and then click OK. If the settings do appear as listed in step 4, skip to step 10.
Click New Type.
In the Description Of Type box, type Icon.
In the Associated Extension box, type ICO.
Click OK, and then click Close.
Use Registry Editor to view theHKEY_CLASSES_ROOT\.icokey, and then verify that the default string contains the following value:icofileIf the .ico key does not exist, create it, and then insert the value listed above. If any other values exist in the .ico key, delete them.
Use Registry Editor to view theHKEY_CLASSES_ROOT\icofilekey, and then verify that the default string contains the following value:iconIf the icofile key does not exist, create it, and then insert the value listed above. If any other values exist, delete them.
Create a new key in the icofile key called DefaultIcon , and type %1 as this key's default value.
Quit Registry Editor, and then restart your computer.
Second Try this
Simple way
Copy your images to:
1
c:\Oracle\Middleware\as_1\forms\java\
Notes:
- Icon files may not be supported.
- In case of a Java security issue when using gif images, you will need to create a jar file and sign it with oracles sign-tool (see below, point 6).
- In case you having trouble with oracle’s sign-tool, do it directly with java’s
Recommended way
1. Create a “icons” folder and place all your gifs in there
i.e. “c:\Oracle\Middleware\as_1\forms\java\<icons>”
2. From within icons folder make a jar file of all the gif images:
1
jar -cvf frmicons.jar *.gif
3. Copy this new jar into “c:\Oracle\Middleware\as_1\forms\java\”
4. Edit/update formsweb.cfg file:
path = c:\Oracle\Middleware\user_projects\domains\<my_domain>\config\fmwconfig\servers\WLS_FORMS\applications\formsapp_11.1.1\config\formsweb.cfg …to update/include:
1
2
3
4
5
6
7
8
9
# Forms applet parameter
codebase=/forms/java
# Forms applet parameter
imageBase=codebase
# Forms applet archive setting for other clients (Sun Java Plugin...etc)
archive=frmall.jar,frmicons.jar
# Forms applet archive setting for JInitiator
archive_jini=frmall_jinit.jar,frmicons.jar
5. Edit/update Registry.dat file:
path = c:\Oracle\Middleware\user_projects\domains\<my_domain>\config\fmwconfig\servers\WLS_FORMS\applications\formsapp_11.1.1\config\forms\registry\oracle\forms\registry\Registry.dat
1
2
default.icons.iconpath=icons/
default.icons.iconextension=gif
At this point your icons should work normally, but if you get a security check of Java for gif files then proceed to the next step to fix this. TIP: May need to restart the weblogic/forms server for changes to take effect.
6. Sign your jar file with oracles sign_webutil.bat sign-tool.
path = c:\Oracle\Middleware\asinst_1\bin\sign_webutil.bat
Firstly, you need to edit the sign_webutil.bat as follows:
1
2
3
SET KEYSTORE_PASSWORD=my_password
SET JAR_KEY=webutil2 # will need to change for every run
SET JAR_KEY_PASSWORD=my_password
Secondly, set the environment path and finally run the command:
1
2
3
set path=c:\Oracle\Middleware\as_1\jdk\bin
cd c:\Oracle\Middleware\asinst_1\bin\
sign_webutil c:\Oracle\Middleware\as_1\forms\java\my_icons.jar
This will create your signed jar file. Once initialized from the web-app it should ask the user to “Trust” the certificate and never prompt again.
Other issues you may encounter and may need to edit/update the following files/registry entries as well:
formsweb.cfg
path = c:\Oracle\Middleware\user_projects\domains\<my_domain>\config\fmwconfig\servers\WLS_FORMS\applications\formsapp_11.1.1\config\formsweb.cfg
1
2
3
4
5
6
7
8
9
10
# Forms applet parameter
codebase=/forms/java
# Forms applet parameter
imageBase=codebase
# Forms applet archive setting for other clients (Sun Java Plugin, ...etc)
archive=frmall.jar, my_icons.jar
...or
# Forms applet archive setting for JInitiator
archive_jini=frmall_jinit.jar, my_icons.jar
Registry.dat
path = c:\Oracle\Middleware\user_projects\domains\<my_domain>\config\fmwconfig\servers\WLS_FORMS\applications\formsapp_11.1.1\config\forms\registry\oracle\forms\registry\Registry.dat
1
2
default.icons.iconpath=/forms/java
default.icons.iconextension=gif
Registry entries:
1
2
UI_ICON:<path_to_icons_dir>
UI_ICON_EXTENSION: "gif": ".gif" "ico": ".ico"
Credits and further information can be tracked for icons issue here and for jar file creation here.
Hope this will help. -
How to display elapsed/current time of a song in Actionscript.
Hi I have a question on how I can make my code display a total time for a song from a media player I created with Actionscript 3.0, using XML to load the song track.
This is my current function which I have done and I am unsure on what the problem is that is not allowing the elapsed time to display in a textfield on my stage.
stage.addEventListener(Event.ENTER_FRAME, timeElapsed);
function timeElapsed(e:Event):void
var minutesCurr:Number = Math.floor((my_channel.position /1000) /60);
var secondsCurr = Math.floor((my_channel.position /1000) % 60);
if (secondsCurr < 10)
secondsCurr = "0" + secondsCurr;
var minutesTot:Number = Math.floor((my_sound.length /1000) /60);
var secondsTot = Math.floor((my_sound.length /1000) % 60);
if (secondsTot < 10)
secondsTot = "0" + secondsTot;
completeText_txt.text = minutesCurr + ":" + secondsCurr + "/" + minutesTot + ":" + secondsTot;
I tried adding to the stage and I am getting a null object reference.
Thanks CaseyThe 1009 error indicates that one of the objects being targeted by your code is out of scope. This could mean that the object....
- is declared but not instantiated
- doesn't have an instance name (or the instance name is mispelled)
- does not exist in the frame where that code is trying to talk to it
- is animated into place but is not assigned instance names in every keyframe for it
- is one of two or more consecutive keyframes of the same objects with no name assigned in the preceding frame(s).
If you go into your Publish Settings Flash section and select the option to Permit debugging, your error message should have a line number following the frame number which will help you isolate which object is involved. -
500GB Hard drive failure - for the 4th time
Ok, So i bought a macbook pro from Apple in about may 2010. It is a 500GB Serial ATA Drive @ 7200 2.66GHz Intel Core i7 GB 1066MHz DDR3 SDRM SuperDrive 8X DL.
Since then the hard drive has failed 3 times and now it has failed for the 4th time this morning.
I've complained to Apple and other than being made to feel like I'm the one causing a nuisance - Apple have told me repeatedly that my experience is unique and there are no known issues with their 500GB drive.
Has anyone else experienced drive failures?
Jason
I'd be interested in hearing from you: [email protected]This sounds to me more like the problem may be with the interface between the motherboard and the HD.
I'd be strongly inclined to insist on a replacement MBP as you're still in warranty.
At the very least, get the complaint escalated beyond the shoploor level. -
How we can display the running time as an output by writting abap report?
hi to all,
my name ahmed iam just abap fresher.i know java/j2ee very well.
i want to display the runing time as an output of abap report.Is it possible if possible how.Hi,
system field SY-UZEIT
WRITE : SY-UZEIT.
Regards,
V.Balaji
Reward if Usefull... -
HOW TO DISPLAY CURRENT DATE TIME IN MASTHEAD IN BRANDING IMAGE AREA
Hi experts,
I need to display current date time in masthead also and also i should change the welcome area to my own text there how it is possible.....
and plz tell detail coding also as i dont have idea to change the coding plz help in this............
where to chan ge and how to change.............
waiting for u r responses......................
Regards,
Shilpa.Shilpa,
go to system administratioon-system configuration-support-support desk-browse deployment-check for com.sap.porta.navigation.masthead.par and download it to nwds.
when you import it to NWDS jar file will be missing so you need to manually add that to PORTAL-INF/private/lib.
once you do this go to HeaderiView.jsp in PORTAL-INF/jsp folder.
write
<%= new java.util.Date()%> after <hbj:form id="HeaderForm">.for that matter u can write this at any line after this statement
once you do that select qucik par upload from the tool bar and deploy it.
go to system administration-system configuration-support-support desk-administration console and upload the par file
before following these steps take a backup of par file
reward points if helpful -
Please provide an example of how to display the system time in CNiNumEdit.
I need to display elapsed time in a numeric edit control. The value must be a double. Using MFC, please show me an example that displays the system time in a CNiNumEdit control.
The trick is to set the FormatString of the num edit control to a format that displays dates/times and to use the COleDateTime class to handle converting the date/time to a double. COleDateTime encapsulates time stored as a DATE, which is a typedef for double. COleDateTime uses the same conversion factor for date/time as what the num edit expects, and since it supports a conversion operator to a DATE, which is really a double, and the num edit Value property is a double, displaying the current time in a num edit can be as simple as this:
// Assuming you have a member variable called m_numEdit for a CNiNumEdit
m_numEdit.FormatString = _T("hh:nn:ss");
m_numEdit.Value = COleDateTime::GetCurrentTime();
Hope this helps.
- Elton
Maybe you are looking for
-
Random shutoff no error message
Hello, I have a 12 month old Toshiba Satellite L50-A013 (Australian) with Windows 8.1 installed. It has started to randomly shut off without warning or any error messages upon restart. It will function for about 30mins before shutting off. It occurs
-
I need to strike through existing text on a PDF I am trying to edit. strikethrough like this but I cannot seem to locate this key on the page where I am editing the pdf in adobe. Where do I locate this?
-
ITunes could not restore iPhone because the iPhone disconnected
I cannot restore my iPhone from my encrypted backup. iTunes begins the restore process displaying 2 hours remaining and after about 45 minutes I get a message on the screen that iTunes could not restore the iPhone because it disconnected. It also say
-
HT4437 how can i stream audio to ipad from video playing on the apple tv using air play?
how can i stream audio to ipad from video playing on the apple tv using air play?
-
Hi, We have master data in SAP and we pass Master Data to ADP for payroll. As of Aug. 1st 2011, CT requires employees to provide a withholding code (A, B, C, D, E or F) only and no longer requires employees to provide marital status. But, SAP's IT 2