G4-AGP: battery replaced; Startup still requires removing battery
My old and trusty G4 did not start up: fan went on, yellow light went on, then stuck.
I found out that when I replace the logic board battery and put it back in, the G4 starts without problems.
Hence, I replaced the battery, thinking it was empty (would be reasonable after 5 years of use).
But the G4 still has the same problem!
Either the battery from Radioshack is empty (although new), or...?
What else could be going on?
Regards,
Peter
PowerMac G5, 2.3GHz DP; Radeon X800 XT; external G-SATA Mac OS X (10.4.4)
Try a PMU reset. See Mac PRAM, NVRAM, CUDA/PMU & Battery Tutorial
Cheers, Tom
Similar Messages
-
i cant activate my iphone on startup it require a apple id how i remove this id idon't have any icloud id
thax
QaddafiSo you've never used iTunes or purchased anything from it? If you have then you will have an Apple ID, as this is used to create an account in iTunes and make purchases. In the unlikely event you've never purchased from iTunes you can create an Apple ID here: https://appleid.apple.com/cgi-bin/WebObjects/MyAppleId.woa/
Regards,
Steve -
Sales order is on overall block still requirements are passed to md04/md07.
Hello Experts.
Sales order is on overall block still requirements are passed to md04/md07.
Please suggest...Hi Experts,
Issue: Sales orders are on overall block at header level. still sales orders are passing demand in MD04 and MD07 -
here in this case the actual scenario is
This Sales order was created on 09/28/2007. with overall block at header level.
then sevral times header block for this order was removed & it was last set on 8 feb. 2009.
after this, there was no change in delivery block at header till the date.
in mean time at every month there was program from legacy system which used to change the below info from SO
(In schedule lines --> shipping tab).
except Delivery date.
Delivery date D 08/31/2007
Goods issue date 07/30/2009
Loading date 07/30/2009
Material avail.date 07/30/2009
Transportation Plan. Date 07/30/2009.
*if we replicate this scenario in dev. and check this, system will not allow to keep above dates as delivery date is in past.
Now if we check SO is on oveall block at header, but we can see Ruquirement for the same SOs in MD04.
(*Note : here we found that date in MD04 for requirement of this SO, is same as date on which legacy system changed the data in SO for schedule line.)
we have replicated the sales cycles like this in development with different possibilities of Blocks on SO header as well as Item level. but they are working fine with dev. and quality system, as all config. settings are fine.(as suggested above by experts).
but it seems like a bug kind of thing.
kindly revert if someone has faced issue like this ,knows to get rid of it.
Regards,
Sujit -
Is this replacement programme still in place? I have just had a card failed in my Mac Pro with a serial number ending in 1M5A
It should be if you meet the requirements described in the article:
This program covers affected ATI Radeon HD 2600 XT video cards three years from the original date of purchase or until July 31, 2011, whichever provides longer coverage.
However, since these cards were last used in the 2008 Mac Pros and the next model came out in early 2009 I would find it unlikely your card meets the requirements unless you bought a refurbished Mac Pro or bought a 2008 Mac Pro the had been sitting in someone's inventory for a very long time. -
Startup error required resources are missing
Heyelp!! I purchased CS 5.5 for my new mac running OSX 10.7.3 installed CS5.5 and it is wonderful. Problem is I prefer Dreamweaver 3 because of the frames thing, so, I thought I would reinstall CS3 and just add Dreamweaver 3, problem is when I do it reads Startup Error, required resources are missing, so, I decided to call Adobe. The response was "we no longer provide support for 3, if you cannot find a solution on the forum there is nothing you can do." Well, $1300 doesn't get you much these days, so Dear Forum readers, any possibility of a leg up here? Thankyou!!
Known issues on Lion
You might find the part about invisible folders and changes to permissions relevant...
Mylenium -
My last computer crashed and my new computer doesn't have a disk drive. I downloaded the CS package, put in my serial number,but during install is is still requiring a disk. What do I do?
is your cs6 a upgrade?
if so, after entering your cs6 serial number you will be prompted to select the qualifying product from a dropdown. select the product you own and enter its serial number.
after entering each serial number at the correct time installation will proceed.
if no, what files (names and extensions) did you download and what are the file sizes shown on your hd? -
My last computer crashed and my new computer doesn't have a disk drive. I downloaded the CS6 package, put in my serial number, but during install it is still requiring a disk. What do I do?
Thread moved from the Adobe Captivate forums.
-
ACL still required when using Scansafe
Hi,
I've looked over the document here - https://supportforums.cisco.com/document/125616/asa-scansafe-step-step-configuration
Do I still require a separate ACL outbound allowing my subnets out to the Internet and do I require NAT statements still for this to work?
Or is the config in the document all this is required for clients to surf the Internet?
ThanksIt is enough if you add the ejb-ref & ejb-link in the session bean. The
session will look up relative to java:comp/env
The following doc shows an example of accessing an ejb from a web app using
ejb-link.
http://e-docs.bea.com/wls/docs81/webapp/components.html#146848
--Sathish
<Christianne Carvalho> wrote in message news:[email protected]..
I'm not getting very well how the ejb-link is used. In my case I have
entity beans that are referenced in session beans.
In my entity beans I have the following XDoclet tag.
* @ejb.bean
* name="ProductDescription"
* display-name="ProductDescription"
* jndi-name="ejb/ProductDescription"
* local-jndi-name="ejb/ProductDescriptionLocal"
* view-type="local"
* type="CMP"
In my session bean I'm currently getting the reference for the entity bean
using the following code:
productDescriptionLocalHome=(ProductDescriptionLocalHome)
lookupLocalHome(ProductDescriptionLocalHome.JNDI_NAME);
If I add the following XDoclet tag to my session bean, in ejb-jar.xml a
<ejb-link> is created inside <ejb-local_ref> tag.
* @ejb.ejb-ref ejb-name="ProductDescription" view-type="local"
Considering the info above:
1) In the entity bean, is there any extra tag to define the ejb-link or is
the ejb-link only defined in the session bean?
2) Re session bean, only adding the @ejb-ref xdoclet tag is enough for
using the ejb-link or do I also have to change my lookup? If I do, what do
I have to search for in the lookup?
Thanks! -
how to remove back panel., want to replace harddirve, how to remove back panel., want to replace harddirve, how to remove back panel., want to replace harddirve
lr45149select your iMac from here: http://www.ifixit.com/Browse/iMac_Intel and click on "hard drive replacement" for step by step instruction.
-
Tried the whole syncing thing with my iphone it still didnt remove song from phone
tried syncing still wont remove song
What does the "whole syncing thing" mean exactly?
This song was transferred from your iTunes library on your computer to your iPhone via the iTunes sync process, which means having Sync Music selected under the Music tab for your iPhone sync preferences wtih iTunes?
If so, do you have entire music library selected, or selected playlists, artists, albums, and genres selected?
Do you have sync only checked songs and videos selected under the Summary tab for your iPhone sync preferences with iTunes? -
I Have followed all the steps and still cant remove iCloud to my existing account and add to the new one, the old email account was changed a year ago and cant get that email plus the password don't work please HELP!
Welcome to the Apple community.
This feature has been introduced to make stolen phones useless to those that have stolen them.
However it can also arise when the user has changed their Apple ID details with Apple and not made the same changes to their iCloud account/Find My Phone on their device before upgrading to iOS 7, or if you restore from a previous back up made before you changed your details.
The only solution is to change your Apple ID back to its previous state with Apple at My Apple ID using your current password, you don’t need access to this address if it’s previously been used with your Apple ID, once you have saved these details enter the password as requested on your device and then turn off "find my phone".
You should then change your Apple ID back to its current state, verify it once again, delete the iCloud account from your device and then log back in using your current Apple ID. Finally, turn "find my phone" back on once again.
This article provides more information about Activation Lock. -
My friend's iphone 4s got chipped a year ago. How much will she charge if she will get it replaced? Still 199 tax or a bit higher since is a 1-year old phone? Thanks
A 4S is still $199 exchange
-
Replacing StartUp discs?
It's a simple enough question, is it possible to buy replacement startup discs for the G4? I can't seem to find mine anywhere and I am therefore unable to do disc partitions etc.
Unless I can do this with my Tiger installation disc?You can order replacement disks from Apple. You can also use your Tiger install disk >> Disk Utility to partition.
-mj
[email protected] -
Windows 7 start up says feature requires removable disk or usb drive
I have a hp pavilion windows 7 home, the last 4 times I have tried to log on I get a pop up that says feature requires removable media like a floppy disk or usb drive. Insert then try again. I have never seen this before and have not had any problems until now. Can someone please let me know whats going on. I have not added or changed anything to cause this and it's very frustrating not able to log on quickly.Thanks
Deb04, welcome to the forum.
When requesting help you should always include the make/model of the computer and/or monitor. This information is necessary for us to review the specifications of them.
Signature:
HP TouchPad - 1.2 GHz; 1 GB memory; 32 GB storage; WebOS/CyanogenMod 11(Kit Kat)
HP 10 Plus; Android-Kit Kat; 1.0 GHz Allwinner A31 ARM Cortex A7 Quad Core Processor ; 2GB RAM Memory Long: 2 GB DDR3L SDRAM (1600MHz); 16GB disable eMMC 16GB v4.51
HP Omen; i7-4710QH; 8 GB memory; 256 GB San Disk SSD; Win 8.1
HP Photosmart 7520 AIO
++++++++++++++++++
**Click the Thumbs Up+ to say 'Thanks' and the 'Accept as Solution' if I have solved your problem.**
Intelligence is God given; Wisdom is the sum of our mistakes!
I am not an HP employee. -
Hi all,
I bought a phone with icloud lock, the find my phone app is off but when I restore it still requires previous owners login details??
Any ideas would be appreciated..iCloud: Find My iPhone Activation Lock in iOS 7
The phone is useless to you without the previous owners information. Either get a hold of the owner and get the info or return the phone and get your money back.
Maybe you are looking for
-
Embedded flash in PDF - Adobe links not working
Super annoyed here. We have a bunch of PDF's used in public education by teachers all over which have flash embedded (yes some not so smart person created them) Until 3 weeks ago Reader would send the user to the page: Acrobat Help | Flash Player nee
-
Java IDE Internationization Tools
Is there any Java IDE(s) out there that have built in tools to support internationalization?
-
Report format trigger not working
Hi, I am using a format trigger on a column in my report as follows: function B_9FormatTrigger return boolean is begin if (:TEST > 30) then return (FALSE); else return (TRUE); end if; end; When testing in reports builder everything works fine, but wh
-
After upgrading to mountail lion my imac can not mount hdd's or usb flash drives. What should I do?
-
Executing shell script through PL/SQL
Hi, I need some help regarding execution of shell script through Oracle PL/SQL. I have a shell script present in /abc/xyz folder with name search.sh , Through a PL/SQL procedure I am creating a file to store the report data. I want to execute /abc/xy