G4 and USB2 hubs

I'm looking at buying a USB hub for my G4. I belive the G4 is USB1, is this correct? The hubs I'm looking at are for connection to USB2 ports. Will these USB2 hubs work with my G4.
Thoughts, experiences & advice welcome.
Thanks

They will work at USB 1.1 speeds. This will not cause you any problems. I have a Belkin 2.0 USB port hooked up to my G4. No worries!
Best,
~FifthWheel

Similar Messages

Is there a USB2 hub that can be connected on FW port?

Since there is a USB2 and FW hub for Mac Mini, which as far as I am aware connects on USB2 port (or maybe requires two feeds?), I am curious to know if the above exists. This would solve my problems of lack of USB ports on iMac and use the FW port I otherwise don't use. Any experience?
Thanks!

I had seen this product. But which connection the hub uses is not mentioned, whether USB, FW or perhaps both?
http://catalog.belkin.com/IWCatProductPage.process?Product_Id=199941
That won't work. That's just a USB hub and a Firewire hub in a single case. The two technologies are not connected within the box; they're completely separate.
From what I found so far, to plug a FW device into a USB2 plug via an adapter seems possible.
Such a connection would take fairly advanced circuitry to make the conversion between the two technologies and no one to date has found it sufficiently worthwhile to make such a converter. The adapter you point to at imemoryyou will not allow the connection of a Firewire device to a USB port nor vice-versa. I have no idea how such an adapter might be used, but if they're claiming that it would allow connection of the two types of busses, they're lying.
Message was edited by: Dave Sawyer

I can't print wirelessly using Airport Express. I have my HP printer connected to a USB hub, and the hub to the Airport Express, but when I select the HP from the printer list, my MacBook says the printer is "off-line" - even when it is not.

I can't print wirelessly using Airport Express. I have my HP printer connected to a USB hub, and the hub to the Airport Express, but when I select the HP from the printer list, my MacBook says the printer is "off-line" - even when it is not. I've tried several USB connectors, and several different ports on my USB hub; same result. I need to have the HP connected to the hub 'cause from there it's connected to our desktop Mac.

Hi,
I am currently replying to this as it shows in the iChat Community.
I have asked the Hosts to move it to Snow Leopard (you should not lose contact with it through any email links you get)
I also don't do Wirelss printing so I can't actaully help either.
10:01 PM Friday; July 29, 2011
Please, if posting Logs, do not post any Log info after the line "Binary Images for iChat"
 G4/1GhzDual MDD (Leopard 10.5.8)
 MacBookPro 2Gb( 10.6.8)
 Mac OS X (10.6.8),
"Limit the Logs to the Bits above Binary Images."  No, Seriously

Windows 7 and bt hub 3

ok.
i have just updated my toshiba satelite laptop from vista to windows 7 (32 bit)
now i am unable to connect to hub via wifi,
bt checked settings and said there is an issue with toshiba laptop and bt hub 3
anyone heard of this?
cheers
karl.

did you try to update the wifi card driver - from manufacturer website and not a windows update
If you like a post, or want to say thanks for a helpful answer, please click on the Ratings star on the left-hand side of the post.
If someone answers your question correctly please let other members know by clicking on ’Mark as Accepted Solution’.

Location of Openreach modem and Home Hub (BT Infin...

In my previous property I asked the BT engineer to locate the modem/HH in an upstairs study and this was no problem, no extra cabling required (master socket was in kitchen) all extension sockets still work fine. I moved home and had BT Infinity 2 installed, phone line enabled same day. The house was built in 2007 so has extensions in all the rooms. Looks like the master socket is in the cupboard under the stairs. Although the previous occupier obviously had the openreach modem and home hub located in the lounge, as the mounting screws etc were still there. But here none of the extensions work, the engineer said this is a side effect of moving the master socket. But why was this possible in my previous house?
The engineer installed with the existing screws etc and left it all in the lounge and still none of the extensions work. I'd like my extensions working and the modem/hub located in my upstairs office, how do I arrange for this?

Hi Youngy
Sorry for the delay.
I can see your email in our inbox and we'll get you a response sent asap.
Thx
Craig
BTCare Community Mod
If we have asked you to email us with your details, please make sure you are logged in to the forum, otherwise you will not be able to see our ‘Contact Us’ link within our profiles.
We are sorry but we are unable to deal with service/account queries via the private message(PM) function so please don't PM your account info, we need to deal with this via our email account :-)”
td-p/30">Ratings star on the left-hand side of the post.
If someone answers your question correctly please let other members know by clicking on ’Mark as Accepted Solution’.

Hollywood Dazzle and Firewire Hub killed FCP

I made the mistake of running DV devices through a FW hub into the same port on my PowerPC G5 and now FCP 5 won't open at all.
I've unplugged everything and reinstalled FCP to no avail.
How can I fix my problem?
System Profiler says my FW ports are still active and DVD studio pro and other associated applications still work.
please help!

The Dazzle has anecdotal evidence of being very problematic and don't use a firewire hub in conjunction with any firewire devices and Final Cut Pro.
Do a forum search for the Guinness Solution, you may find the answers within the results. Also do a search for Dazzle and firewire hub and you'll find anecdotal evidence.

I cann't install drivers for wifi and usb2 on inspiron 3721.

Hi.
I cann't install drivers for wifi and usb2 on inspiron 3721.
My OS is windows 8.1
ID for usb2:
USB\VID_0BDA&PID_0129&REV_3960
USB\VID_0BDA&PID_0129
ID for wifi:
PCI\VEN_168C&DEV_0036&SUBSYS_020C1028&REV_01
PCI\VEN_168C&DEV_0036&SUBSYS_020C1028
PCI\VEN_168C&DEV_0036&CC_028000
PCI\VEN_168C&DEV_0036&CC_0280
Please, help me!

Install the Intel Chipset Drivers if you haven't done so already:
https://downloadcenter.intel.com/download/20775/Intel-Chipset-Device-Software-INF-Update-Utility-
http://downloads.dell.com/FOLDER01739853M/1/Chipset_Driver_498GM_WN_9.5.14.1724_A01.EXE
http://downloads.dell.com/FOLDER01744340M/2/AHCI_Intel_W8.14_X00_A01_Setup-9V0D2_ZPE.exe
That's the Realtek Card Reader:
http://downloads.dell.com/FOLDER01692810M/1/Chipset_Driver_7HRCT_WN_6.2.9200.39050_A00.EXE
That's an Atheros Dell Wireless 1705 Wireless Card use this driver:
http://downloads.dell.com/FOLDER02227589M/1/3340_Network_Driver_XVXC6_WN_10.0.0.320_A00.EXE
Also install...
Aeroplane Switch Driver:
http://downloads.dell.com/FOLDER01646912M/260/AirplaneMode_W81_x64_1.4.1_ZPE.exe
Touchpad:
http://downloads.dell.com/FOLDER01918135M/1/Input_Driver_JCY9W_WN_18.0.1_A08.EXE
Audio:
http://downloads.dell.com/FOLDER01706440M/1/Audio_Driver_8F9KD_WN_6.0.1.7023_A00.EXE
Video:
http://downloads.dell.com/FOLDER01815953M/1/Video_Driver_W1PPW_WN_10.18.10.3316_A02.EXE
http://downloads.dell.com/FOLDER01726226M/1/Video_Driver_3JMFD_WN_13.151.0.0_A00.EXE
Dell Quickset:
http://downloads.dell.com/FOLDER01861763M/1/Application_7JTWX_WN_10.16.004_A01.EXE
You may also update the BIOS to A12:
http://downloads.dell.com/FOLDER01818934M/1/3721A12.exe

What is source system and open hub destination?

Hello,
Kindly tell me In BI data modeling workbench ,in modeling there is are two areas name as "Source system" and "Open Hub destination".What is mean by this???How we use it in BI?

Hi,
Source system as the name suggests mentions the source of data. The place from where you are extractin data to BW.
http://help.sap.com/saphelp_nw2004s/helpdata/en/7a/27bcf087c7464db8b95eaa717b6e6a/content.htm
OpenHub is for exporting data out of BW.
https://www.sdn.sap.com/irj/sdn/go/portal/prtroot/docs/library/uuid/11e1b990-0201-0010-bf9a-bf9d0ca791b0
https://www.sdn.sap.com/irj/sdn/go/portal/prtroot/docs/library/uuid/3042c5fc-21a8-2910-c79e-ad530260ae2e
https://www.sdn.sap.com/irj/sdn/go/portal/prtroot/docs/library/uuid/01d3a090-0201-0010-9783-bc
http://help.sap.com/saphelp_erp2005vp/helpdata/en/bf/50453c01f4f75fe10000000a11402f/frameset.htm
Thanks,
JituK

Infospoke and open hub

hiya can anyone explain me regarding info spoke and open hub works . it will be very helpful
regards
shariff

Hi Shariff,
The open hub service enables you to distribute data from an SAP BW system into external data marts, analytical applications, and other applications.
This should be a good starting point for you:
http://help.sap.com/saphelp_nw04/helpdata/en/1e/c4463c6796e61ce10000000a114084/content.htm

Post Moved Re-windows-7-and-bt-hub-3

Post moved to Other BB Queries http://community.bt.com/t5/Other-BB-Queries/Re-windows-7-and-bt-hub-3/td-p/675764
If you want to say thanks for a helpful answer,please click on the Ratings star on the left-hand side If the reply answers your question then please mark as ’Mark as Accepted Solution’

yes wifi switched on.
can connect with cable no problems,
bt tech said there is an issue with toshiba laptops and bt hub 3 on windows 7
thanks
karl.

Re: windows 7 and bt hub 3

first of all is your Lap top wireless enabled ?are the wireless cards drivers installed?
have you tried to connect to the hub with an ethernet cable and see if you get an internet connection ?
If you want to say thanks for a helpful answer,please click on the Ratings star on the left-hand side If the reply answers your question then please mark as ’Mark as Accepted Solution’

yes wifi switched on.
can connect with cable no problems,
bt tech said there is an issue with toshiba laptops and bt hub 3 on windows 7
thanks
karl.

Difference between INFOSPOKE and OPEN HUB DESTINATION

HAI,
i want the difference between INFOSPOKE and OPEN HUB DESTINATION in detailed....
thank you
@jay

Hi
See this
Re: Open Hub and Infospoke
Bye
N Ganesh

Apple TV issues and Bt infinity 2 and BT Hub 4

I am having issues with my Apple TV2 since changing to infinity and home hub 4. XBMC (leatest version is not working, I cannit use Navi X, 1 Channel, Icefilms etc. Ive tried everything but cant get it to work. Works fine on the Home Hub 2 though. Any ideas?

If this is the hub 4 i had the same thing . The solution is to go into the hub manager and and untick the smart setup.

G580 external USB 2 and 3 hub connection

G580 Windows 8 64bit
I am unable to connect either USB2 or USB3 external hubs either powered or not to the notebook. The USB2 is locked out by windows and the USB3 crashes the system until removed. Intel driver update states that all Intel drivers are up to date. Both tested hubs work on an HP Vista 32bit laptop. Individual USB devices work fully so it seems to be hubs that are the problem. As there are only two USB3 ports available it would be convenient to use a hub occasionally. Any help would be gratefully received

I have a drive I had been using in a 2007 MacBook that I would like to "upgrade" to a compatible version of 10.7.4 (build 11E2705), but I am having trouble finding a way to get the version of the OS on the drive without affecting the data on the drive.
I had hoped that booting from the Recovery partion on the SSD would allow me to "Reinstall 10.7" to get a compatible version, but the drive still can not boot the 2012 MacBook Air.
I may try cloning next, moving directories I want to keep to the root level of the target drive, but I wish there was an easier way to "refresh" the install of the OS to a newer version for new hardware.
I also need to find a way to "refresh" the USB drive I have for installing 10.7, to make sure it has the ability to boot new hardware, since the original 10.7.4 USB install clone does not boot the newest laptops.

USB and Firewire Hubs

Hi All and Happy New Year,
I am trying to connect all my peripherals to my G4 iMac.
I am uncertain which devices will need USB2.0 and those that can get by with USB 1.1.
I have questions that hopefully can be answered here. I have the following devices.
2 Epson Printers R200 and R2400
2 Scanners Minolta/Dimage 5400 film scanner and an Epson Perfect 1870 flatbed
2 External Hard drives Maxtor FW 300GB One-Touch and Lacie FW 250GB
This is what I am trying to use to connect everything.
Belkin 4 port 2.0 USB Hub
D-Link 4 port 1.1 USB Hub
ADS Dual Link 4 2.0 USB and 3 Firewire 400
Should I daisy chain the hard drives?
Can I plug the D-Link 4 port 1.1 USB Hub un-powered into the either of the other hubs?
This hub would be used for low power devices like card readers and whatever other ones that are suggested here.
Can I plug the Belkin 4 port 2.0 USB Hub un-powered into the powered ADS hub?
Which devices need to be connected to the native USB/FW ports on the iMac?
Sorry for so many questions but I went to 2 different Apple Stores and got completely different answers.
I appreciate the help and direction.
Thanks COVRC

I would configure as follows.
USB2.0 (Port 1) - (powered) Belkin USB2.0 Hub - (Port 1) R200, (Port 2) R2400, (Port 3) Epson Scanner, (Port 4) Card reader,
USB2.0 (Port 2) - Apple Keyboard and Mouse
USB2.0 (Port 3) - Minolta Scanner
Firewire (Port 1) - Lacie FW 250GB
Firewire (Port 2) - Maxtor FW 300GB
I feel like I'm missing the point as you don't seem to list enough devices to use more than one hub.
mrtotes

G4 and USB2 hubs

Similar Messages

Maybe you are looking for