G4 display is suddenly negative black and white image...
As I run out to work, I notice this strange appearance on the monitor. Negative black and white for everything on the monitor. Does anyone know what causes this or how to switch back to normal?
Power Mac G4 Mac OS X (10.2.x)
Power Mac G4
Hello Frank and welcome to discussions,
Try this key stroke...
Hold down the Control Option Apple keys then hit 8. This will toggle the effect as well.
Control + Option + Apple then hit 8.
Hope that helps some
Cheers
Ian
Similar Messages
-
My iphone 5s display has suddenly gone black and white?
Dear Fellow Apple users,
I have a iphone 5s and while fiddling suddenly the display has gone black and white. it has the laterst IOS 8 installed but is giving a lot of problems. kindly advise, suugest remedy.
thanks,
Sundeepgo check settings>accessibility> and look at all these options including invert colors, grayscale etc.
-
So, my Macbook Pro with retina display only prints in black and white. My printer, Officejet 4620 series [555DE4], is not the problem. I want to know how to be able to print in color as well??
In the Print dialog, select the Color Matching tab and then select Vendor Matching.
-
Inverted black and white images in iPhoto 6
After I recently upgraded to OS X 10.4.8, a number of black and white images in my iPhoto 6 library started showing up inverted (like negatives) when I open them. The thumbnails, however, are in regular black and white. This didn't happen using OS X 10.4.3. I can't seem to find a tool in iPhoto 6 to convert these images to the correct display. Do you have any explanations or suggestions?
Macintosh PowerPC G5 Mac OS X (10.4.8)iPhoto 6 does not work well with Grayscale. You'll need to convert them to sRGB. They'll still be black & white, but they'll have a color profile that iPhoto 6 will accept. Old Toad created an Automator application to embed the sRGB profile into your photos. Go to his Toad's Cellar and download the "Embed wRGB Color Profile 2" App. In Finder go in your Originals folder, then drop a roll folder containing these photos onto the app.
http://homepage.mac.com/WebObjects/FileSharing.woa/wa/default?user=toad.hall&tem platefn=FileSharing7.html&xmlfn=TKDocument.7.xml&sitefn=RootSite.xml&aff=consume r&cty=US&lang=en# -
PSE 8 coloring a black and white image
Okay, so I downloaded a free trial of PSE 8, so my experience with it is limited, which may contribute to my problem. I've watched tutorials on how to add color to a black and white photo using the paintbrush tool, though I haven't watched one for PSE 8.
I'll make a new layer, paint part of the picture, and then add another layer. But when I click a different color to paint with, it changes the color of what I already painted, even though I'm on a different layer.
Also when I tried to just save the image with one part painted, it didn't save it, and the image looked as it did originally.
Any help is appreciated! Thanks!Hi,
Are you using the right tool to paint on a layer?
For coloring a black and white image, you need to save different areas of your image on a different layer and then use either Paint brush or a Paint bucket tool.
It seems that you are selecting a wrong tool. For selecting Brush, press B.
Then try painting on one part of the image and then go to the the color swatch present at the end of the tools panel on the left as :
Now click on the foreground color swatch(on the top) to change the color with which you want to paint.This will not change the color of other layers on changing the color.
Cheers
Swarnima -
I hired a commercial artist to create a color image for the cover of a self published book. I want a black and white image for the inside. The commercial artist has not responded to this request. How do I determine the format of the color image, I'm guessing it's Illustrator's formatting but I don't know. How can I find out if Illustrator will open the file and allow alterations? The image opens only in Apple's Pages software?
rons,
It seems that all you have is a raster image, presumable PNG24 or JPEG, in RGB.
It may have been created as raster artwork in Photoshop, or it may have been created as vector artwork with the help of Illy, or as a mixture of vector and raster artwork in either application, or both combined.
If you just need to have a raster representation in black and white based on the current colour image, you may try this, in a new RGB document (View>Smart Guides are your friends):
1) File>Place the image (you may tick Link or untick and have it embedded);
2) Create a rectangle with black fill (R = G = B = 0), at least as large as the image, and place it behind the image (you may ClickDrag with the Rectangle Tool between opposite corners, then Ctrl/Cmd+X+B);
3) Select all and in the Transparnecy palette flyout click Make Opacity Mask with both Clip and Invert Mask ticked. -
How can I create a black and white image similar to what I see in the "Replace Color" tool?
Hi all, I'm just wondering how I can create a black and white image similar to what I see in the preview window of the "Replace Color" tool. See attached screenshot for clarification -- I need the grass to be black while the soil is white or vice versa. Any tips?
One way is to use Select>Color Range
Make a new Color Fill Layer>White
(Layer>New Fill Layer>Solid Color)
Put a new color fill layer below>black
Just invert the layer mask on the top fill layer for the opposite effect. -
"warming up" a black and white image pse6
is there a way to change the tone of a black and white image to mimic the effect of using warm-tone photographic paper?
Mike,
I'm not sure what you mean by warm-tone photographic paper, but here are 2 methods I use to convert a picture to a sepia tone. They might work in your case.
For both methods, first convert the picture to RGB mode if not already so (Image>Mode>RGB Color).
Method 1
Add a Hue/Saturation adjustment layer. In the Hue/Saturation dialog window, check the Colorize box and play around with the 3 sliders. If the result is too harsh, try lowering the layer's Opacity.
Method 2
Set the background color to white (you can type "d" to set the default B&W colors). Use the Color Picker to set the foreground color to the tone you want.
Add a Gradient Map adjustment layer with the Color Blend Mode. In the Gradient Map window select the Foreground to Background option. If the result is too harsh, try lowering the layer's Opacity. You might also try changing the layer's Blend Mode to Multiply or Soft Light (or others) to get a slightly different look. -
Hi, once in a while the screen on my 5K imac turns black and white when I'm on youtube watching videos in fullscreen mode. It also exits the fullscreen mode automatically from one second to the next and a warning pops up saying how I can exit the fullscreen mode. Does anyone have an idea why this happens and if this is a software or hardware problem?
I'm using a Dell laptop with Windows 7. I've set the resolution to 1024x768, though the maximum resolution on this can go as high as 1366x768. So this is a problem that no one has been able to figure out? I've ran lots of other Flash-based applications that went fullscreen with no problem, so I'm wondering what other methods there are to try, if possible.
-
Scaling 1-bit bitonal black and white images
I have an image of a document that was scanned
black-and-white (1-bit color depth) that I need to display and
scale. When I use Flex's built in Image.Scale it scales very
"choppy" and unreadable. When I scale the same image in Photoshop,
it seems to use much more antialiasing, and the form is clearly
recognizable, even at just 125 pixels wide.
Is there a way to get Flex to use a better scaling algorithm
for 1-bit images? It seems to do a smashing-good job with
full-color image scaling.thx for answering
You understood right, I have enough memory for saving 1-bit images, but
Graphics.drawImage(Image img, int x, int y, int anchor) can draw only RGB images so each time I want to draw some image, I have to remake 1-bit images into RGB images, it takes a lot time, so I need to make some optimization
My application draws symbols, but symbols are presented by Glyphs, so I draw some black&white Glyphs -
How to identify black and white images for dynamic collection ?
Hello
I would like to make a dynamic collection to quickly find my black & white pictures. It is very easy to do with your original files which have undergone a black and white (Grey) conversion under the developpement module : you have to specify "treatment - is - Grey level" in the dynamic collection description.
But what about original Grey levels images ? I have some scans of black and white negatives, and I would like to see them in the same collection.
I have tried to use EXIF metada, but none of them is related to this information (neither does IPTC). But such images are well detected as Grey levels images in the development module...
I don't know how to do (unless manually tagging images of course).
Does anybody have a clue for an automated solution ?
Thanks
Erwannyes Eclipse 2.0 provides runtime chartting.
Please refer to this thread
[chartting|Re: Charts won't appear in CR Viewer?]
void AddChart(ReportClientDocument clientDoc, String chartTitle)
ChartDefinition chartDefinition = new ChartDefinition();
chartDefinition.setChartType(ChartType.group);
IDataDefinition dataDefinition = clientDoc.getDataDefController().getDataDefinition();
Fields conditionFields = new Fields();
IField field = dataDefinition.getGroups().getGroup(0).getConditionField();
conditionFields.addElement(field);
chartDefinition.setConditionFields(conditionFields);
Fields dataFields = new Fields();
for (int i = 0; i < dataDefinition.getSummaryFields().size(); i++)
IField summaryField = dataDefinition.getSummaryFields().getField(i);
dataFields.addElement(summaryField);
chartDefinition.setDataFields(dataFields);
ChartObject chartObject = new ChartObject();
chartObject.setChartDefinition(chartDefinition);
ChartStyleType chartStyleType = ChartStyleType.pie;
AreaSectionKind chartPlacement = AreaSectionKind.pageHeader;
chartObject.getChartStyle().setType(chartStyleType);
chartObject.setChartReportArea(chartPlacement);
chartObject.getChartStyle().getTextOptions().setTitle(chartTitle);
chartObject.setHeight(5000);
chartObject.setWidth(5000);
chartObject.setTop(1000);
IArea reportHeaderArea = reportDefController.getReportDefinition().getReportHeaderArea();
Section chartSection =(Section)reportHeaderArea.getSections().getSection(0);
clientDoc.getReportDefController().getReportObjectController().add(chartObject, chartSection, 1);
Further you can format the fields as per your requirement.
Hope this helps
Regards,
Tej -
Black and white images appearing sepia online
While editing i've made images black and white in lightroom. In my catalog they show black and white, in folders on my computer they show black and white.
However for some reason when I load them online, some of them will show with a sepia/brown tone.
It's only happening with a select few of the images and I can't figure out why.
At first I thought it was maybe a problem with blogger, but the images in question are loading sepia toned on Facebook as well.
I'm not applying any special features during export, adding tints, or changing color tone. And as I said, it's not happening to all of them.
You can see an example at this link :Rachel Mariesa Photography: Brett & Emma
The first black and white worked fine, and the rest are sepia looking.
Any suggestions would be welcomed, as this is very frustrating!Ge Te
The problem isn;t that the images are black and white, but more likely that they have a greyscale color profile. iPhoto only supports RGB, so attach an RGB profile to the images and they will display correctly.
Regards
TD -
How can i change image to black and white?
Answer : Link: [http://stackoverflow.com/questions/3333652/load-image-from-photo-library]
Message was edited by: sajjadzare -
Printer prints only black and white images from MacBook Air
I tried printing the same file with the PC and it prints ok. Whenever I print with our MacBook Air, it only prints black and white and yes it has a driver automatically installed and updated.
Printer model: HP Deskjet 4620 seriesHey ChloeAmby,
The article linked below details a number of troubleshooting steps that can help resolve issues with printing from your MacBook Air.
Get help resolving printer issues on your Mac
https://support.apple.com/en-us/HT203343
All my best,
Allen -
Adding color to a black and white image
How do you add a splash of color to a black and white photo? I have this beautiful picture of my daughter in a ballet tutu and I would like the pic to be black and white and her leotard to remain pink.
To colorize a B&W, please refer to my reply in the recent forum topic "Photo Elements 6.0 question" : http://forums.adobe.com/thread/492539?tstart=0
Maybe you are looking for
-
Error while saving Excise Invoice- 'Balance in transaction currency'
Hi to all. I am using TAXINN taxing procedure.Recently I applied notes for S&H cess legal changes. Everything working fine. But when I try to save excise Invoice system throws the following error. Amount Rs.53 is S&H Cess. If i removed conditio
-
Photos don't show up in file name order
Photos don't show up in file name order on the iPad. Is there a way to do it?
-
Sql to display output in Horizontal view
Experts, I need to display the sql query output in horizontal manner. Below I have given the script. create table TestTable (id number, name varchar2(10)) insert into TestTable values (1, 'John') insert into TestTable values (2, 'Mckensy') insert int
-
Ive just signed up for the adobe photoshop pack, i use a mac, when i click download, nothing is happening.. Am I doing something wrong?? When I try and open the software I already had from trial it says its expired, or i need to use a serial number
-
How can I do to use an OpenGL application in a Labview VI ?
I would like to use it as a window in the GUI VI.