G4 DVD drive won't recognize OS 10.4 upgrade disc

I have a a PowerMac G4 (AGP graphics) with a CPU type PowerPC G4 (2.9). I have a upgrade disc for OS 10.4. When I load it into my Quantam Fireballlp LM27.3 DVD drive, the drive won't recognize the disc. It attempts to read it and then ejects it. I have an external USB 2.0 DVD RW burner plugged into a USB 1.0 port, and it recognizes the disc, but I can't select it as the startup disc.
How do I get my system to read the upgrade disc so I can upgrade to OS 10.4? I've run a lens cleaner several times with no change.
Thanks!

Hi-
Well, if you know someone who has a Mac, or, if you have another machine, try the disc in another machine. There is a possibility that the disc itself is bad. I would consider this a strong possibility, since the drive recognizes other DVD's, and the Panther install disc.
If the disc tests good in another machine, then you will need to consider replacing the drive for a newer model. A new combo drive is only about $30-$40. The Pioneer DVR-112 would be a good consideration.
http://eshop.macsales.com/item/Pioneer/DVR112DBK/
As for the "helpful" not working, there seems to be a problem within the system (known by the hosts, yet allowed to continue....). For now, I will gladly accept your thanks! (and, you're welcome!)

Similar Messages

  • My cd/dvd drive won't recognize my cd pavillion dv4

    Every time I put a CD or DVD into my CD/DVD drive, it won't recognize it. It "thinks" for about a minute and then stops. Sometimes if I open and close it will work but not always. I have a Pavillion dv4 with windows 7 that I bought in November 2009 (but my entire hard drive was replaced in May 2011)

    Hi,
    Please try the following method to fix first:
       http://support.microsoft.com/mats/cd_dvd_drive_problems/en-us
    Hope this helps.
    BH
    **Click the KUDOS thumb up on the left to say 'Thanks'**
    Make it easier for other people to find solutions by marking a Reply 'Accept as Solution' if it solves your problem.

  • DVD Drive won't recognize DVD's or CD's

    I just got a new, refurbished Mac Mini today. The DVD Drive will recognize only 1 out of the 3 install disks that came with the system. It tries to initialize 2 out of the 3 and just ejects them about 15 seconds after I put them in. I tried to put a blank CD in and it ejects it as well after about 15 seconds. I called Apple Tech. Support and they had me reset the system by holding down the power button for 10 seconds without any peripherals attached. They also had me try holding down the "Windows" Key, "Alt" Key, "R" Key and then the "P" key upon bootup (I'm using a Windows Keyboard). I couldn't get this to work though probably because I'm using a PS2 keyboard with a USB adapter, even though I can use the keyboard in the Mac GUI. Tech support told me if I can boot up with these 4 keys pressed this works 99% of the time in fixing most problems, but I don't have a USB keyboard yet to try it.
    Now I'm downloading all the updates for 10.4.10 to see if that will fix anything per the advice of tech support. Is there anything else I can try before I take it to a local Apple Store?

    For now can I install the Leopard Upgrade from a DVD drive on a PC on my network? Is it better to copy the whole disk from the network DVD Drive to my local drive and install it from there?

  • DVD Drive Won't Recognize writable DVD media as writable

    No matter who makes the disc, no DVD-r DVD+r DVD-RW will be recognized as writable. all work fine in my PC and friends PC's. Anyone know what the possible fix is? the disc below is a Verbatim DVD-RW.
    Disk Utility Info:
    Name : MATSHITADVD-R UJ-857
    Type : Disk
    Disk Identifier : disk1
    Media Name : MATSHITA DVD-R UJ-857 Media
    Media Type : DVDROM
    Connection Bus : ATA
    Connection Type : Internal
    Connection ID : Device 0
    Device Tree : /PCI0@0/PATA@1F,1/PRID@0/@0:0
    Locked : Yes
    Writable : No
    Ejectable : Yes
    Mac OS 9 Drivers Installed : No
    DVDROM : Yes
    Erasical Optical Media : Yes
    Optical Media Type : DVD-RW
    Device Type : CD-ROM, CD-R, CD-RW, DVD-ROM, DVD-R, DVD-RW, DVD+R, DVD+RW
    Location : Internal
    Total Capacity : 0 Bytes
    S.M.A.R.T. Status : Not Supported
    Disk Number : 1
    Partition Number : 0
    System Profiler output for the same disc:
    MATSHITA DVD-R UJ-857:
    Firmware Revision: HAEA
    Interconnect: ATAPI
    Burn Support: Yes (Apple Shipped/Supported)
    Cache: 2048 KB
    Reads DVD: Yes
    CD-Write: -R, -RW
    DVD-Write: -R, -RW, +R, +RW
    Burn Underrun Protection CD: Yes
    Burn Underrun Protection DVD: Yes
    Write Strategies: CD-TAO, CD-SAO, DVD-DAO
    Media:
    Media Type: DVD-RW
    Blank: Yes
    Erasable: Yes
    Overwritable: Yes
    Appendable: Yes
    Mac OS X 10.4.10 \/ it's wrong in the green text
    Message was edited by: sndtech

    For now can I install the Leopard Upgrade from a DVD drive on a PC on my network? Is it better to copy the whole disk from the network DVD Drive to my local drive and install it from there?

  • EXPERTS!! CD/DVD Drive Won't Recognize Discs

    Hello Experts,
    My CD/DVD drive is unable to read discs. This has happened before while the computer was under warranty and the tech was able to remotely fix it, but it has started doing it again.
    I figured my drive had gone bad, so I have bought a new drive and installed it, but the same problem. I have also uninstalled and reinstalled the drivers as well. No new software has been added or removed either.
    HP Pavilion Notebook dv7-2185dx
    The drive is a TSSTcorp CDDVDW TS-L633M ATA Device
    Thanks in advance for the help!
    Brian

    Also have tried clearing the upper/lower filters in the registry, as well as system restore and microsoft fix it.
    You can hear the drive reading, or attempting to read the disc, but it says there is no disc present.

  • DVD Drive won't recognize previously burned CD-RWs

    When sending files to our printer, I burn them to a CD-RW. When the discs come back and I insert them to erase and put my next job on, the computer will not recognize the CD. Does anyone know what happens to the disc once it leaves my office and what I can do to correct this problem?
    Mac Pro Mac OS X (10.4.8) SONY DVD RW DW-D150A
    Mac Pro   Mac OS X (10.4.8)  

    Do you have the Optiarc 7170A? Your problem sounds exactly like mine, the question on which remained/remains unanswered (http://discussions.apple.com/message.jspa?messageID=4478103#4478103).
    My solution was to take out the Optiarc and put in my ex-machine's Pioneer DVR-111.
    If anyone has any words of solace/wisdom on how to make the Optiarc work correctly with RWs, I'm sure BamaMan would like to hear, as would I.

  • DVD drive won't recognize iLife '08 install CD

    First generation G5, Mac OS 10.4.11
    When I insert the install CD for iLife '08 into the drive, it spins away for about a minute and then ejects it with no error message. The same install CD works fine on my laptop. Other install CD's work on this same G5.
    Anything I can try to get my Mac to open the iLife '08 install CD? If not, can I download the iLife '08 install files without having to purchase it again?
    Thanks.

    Hi Brian White3
    Do you have another mac?. .I would try to transfer the files from one mac to the other one . I did that for dvd studio pro and it worked out fine . If you have a router setup in your house turn on the file sharing option . You can also try to run your other mac to transfer the files too. I can also tell to use a back up drive and load the file to it . As for why it wont load off the dvd Im not for sure on that one .
    Let me no if you need more help.

  • My DVD drive won't recognize blank DVDs! Hayilp!

    Hi, My 17" G4 Powerbook recently stopped recognizing blank media when I insert them, there's some whirring noises for about a minute and then it spits them back with no dialogue whatsoever. Please help.
    Many thanks in advance,
    Max

    I'm having the same problem and am really trying to burn some large .iso files. ***?

  • Tecra M4 - DVD drive doesn't recognize any disk under Vista

    Hi,
    after the installation of Vista my dvd drive doesn't recognize any disks !
    No upgrade from XP! It was a clean Vista installation.
    I found several links about the registry entries upper and lower filter this entries doesn't exist in my registry under the class CDROM.
    I tested the drive under XP it works fine and recognizes everything.
    Drivers are correctly installed no problems in the device manager is prompted.
    So i have no idea how to get it working, seems to be a Vista problem
    Could any one help me ? I'm really frustrated about this
    Thanks for your help

    Maybe this helps:
    - Remove the CD/DVD drive from the device manager.
    - Then access the registry and remove the Upperfilters and Lowerfilters values completely from the following registry key:
    HKEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet\Contro l\Class\{4D36E965-E325-11CE-BFC1-08002BE10318}
    - Then reboot the notebook
    But what happens exactly? What disks are not recognized?

  • My dvd drive won't open so I can insert a disc.  It has opened in the past by pushing the button on my mac

    I can't insert any dvd's because my dvd drive won't open when I push the open key.  It has always worked in the past.  Any suggestions on how to fix this?

    It's possible there is a CD/DVD in the drive that's stuck. Open Disk Utility in Applications/Utilities. Do you see a CD/DVD in the drive? Try ejecting using unmount.
    If that fails, restart and hold down the mouse button whe restarting.
    Other links:
    Kappy's Five ways to eject a stuck CD or DVD from the optical drive https://discussions.apple.com/thread/4795807
    Ds store's suggestion:  Reboot the computer holding the option key down, wait for the boot drive options to appear, then press the eject key on the keyboard. When it's out, then select your boot drive and click the arrow key to boot up.
    http://guides.macrumors.com/Force_Eject_a_Stuck_CD_or_DVD
    Hope this helps!

  • New hard drive won't recognize my iPhone

    My hard drive crashed and my replacement hard drive won't recognize my iPhone. I can see all my content, but can't move or replace it. I was able to access content on my iTouch just fine and luckily synched my contacts back into my laptop, but no dice on the phone. Any ideas? BTW, my phone is a jailbroken original iPhone and I am not particularly proficient with this kind of stuff.

    Does it boot into Open Firmware with CMDOption+of ?
    http://docs.info.apple.com/article.html?artnum=42642
    reset-nvram (press Enter)
    set-defaults (press Enter)
    reset-all (press Enter)
    Have you done a PRAM reset...
    http://docs.info.apple.com/article.html?artnum=2238

  • Installed itunes 6 and now CD/DVD drive won't work at all

    I just bought a new ipod and installed the software and now my CD/DVD drive won't work at all. Here is my info: Could someone please help!!!
    Microsoft Windows XP Professional Service Pack 2 (Build 2600)
    Dell Computer Corporation Inspiron 5160
    iTunes 6.0.4.2
    CD Driver 2.0.4.3
    CD Driver DLL 2.0.3.2
    LowerFilters: ASAPIW2K (6.0.2.0),
    UpperFilters: GEARAspiWDM (2.0.4.3),
    Video Driver: NVIDIA GeForce FX Go5200 \GeForce FX Go5200
    IDE\DiskFUJITSUMHT2080AH_______________________006C___, Bus Type ATA, Bus Address [0,0]
    IDE\CdRomSONYDVD+-RW_DW-D56A____________________PDS7___, Bus Type ATA, Bus Address [0,0]
    SCSI\CdRomROXIO__DVD-ROM_EMULATOR___, Bus Type SCSI, Bus Address [0,0]
    If you have multiple drives on the same IDE or SCSI bus, these drives may interfere with each other.
    Some computers need an update to the ATA or IDE bus driver, or Intel chipset. If iTunes has problems recognizing CDs or hanging or crashing while importing or burning CDs, check the support site for the manufacturer of your computer or motherboard.
    Current user is administrator.
    D: SONY DVD+-RW DW-D56A, Rev PDS7
    Drive is empty.
    E: ROXIO DVD-ROM EMULATOR, Rev
    Drive is empty.
    If anyone has a solution for this stupid problem that would be great.
    Thanks

    Yes, I suspect that it's the virtual drive emulator software you have there. I know nothing about that software and it doesn't look like the Roxio support page even mentions it, so it's probably software old enough that they're not supporting it anymore.
    To uninstall any software, I would start with the "Add and Remove Programs" Control Panel. Uninstall it there, and then use the Microsoft Installer Cleanup Utility —
    http://support.microsoft.com/default.aspx?kbid=290301
    Download and install that. Run it and find the drive emulator software on the list and remove it there. And reboot and see if that has successfully removed it.
    There is a work around that if we just remove the iTunes CD driver, you'll probably get your drive back, but you'll only be able to rip CDs, you won't be able to burn them without the iTunes CD driver installed. You do have some Pinnacle CD burning software installed. Are you currently using that or is that leftover cruft as well?

  • DVD Drive will not recognize any movie DVD disk in the drive - thus will not play any dvd movies.

    HP G71 449WV dvd drive will not recognize any dvd disc that has a movie on it. Will not play movies, keeps saying to insert disc when there is a disc in there.  It will recognize a dvd data disc or a blank dvd, it just will not recognize any dvd movies.  I've tried the microsoft fix it, downloaded new codecs, using different dvd playback software but none of that works since the drive will not recognize there is even a dvd movie in the drive.  Computer is out of warranty.

    Hello crollinsphoto1, welcome to the HP Forums.
    It appears that you're not able to play movie DVD's in the DVD player in your notebook. I will try to assist you with this.
    I'd recommend starting with this document:
        Resolving DVD and Blu-ray Movie Problems (Windows 7).
    Also, are these purchased DVD's or burnt DVD's?  
    Do the movies play in other sources? (DVD player, other PC)
    Let me know how this goes.
    Thanks.
    I worked on behalf of HP.

  • E440 CD/DVD Drive Won't Open

    Hello. I bought a Thinkpad Edge E440 and it came yesterday. However the CD/DVD Drive won't open. If it do the paperclip trick, it will, but when I press the button it just makes a few noises and then nothing, if I right click the drive and press eject, same result. Any suggestions please?

    reliablepctechs wrote:
    obtain a paper clip, straighten it out and insert it in the small hole found on the bezel of the cdrom drive.  Doing so mechanically releases the drive...
    take reasonable care in doing so....insert it about an inch or so
     I saw that you posted the suggested paper clip trick as a solution, but it does not work for me. my machine is a new (2011) hp. i do not think it matters that it is a bluray drive. any other hints would be hugely appreciated

  • Cd/dvd drive won't burn a disc,although it will read a cd

    i have a compaq cq62 with windows 7 home premium with the cd/dvd drive won't burn a disc,although it will read a cd

    Hi,
    First, try the automated fixit from Microsoft on the link below.
    Windows 7
    Check if the drive will now burn a disc.
    If it still doesn't work, click the Start Menu, open All Programs, open Accessories, right click the Command Prompt and select 'Run as Administrator'.  In to the prompt type the following command and hit enter.
    sfc /scannow                 ( note that there is a space between sfc and the / )
    Let the process complete, then type exit and hit enter. 
    Next, click the Start Menu, open the Control Panel and click on Device Manager.  Next click to open DVD/CD-ROM Drives.  Right click the drive and select uninstall.  Do not delete drivers if asked.  When the device has uninstalled click on the 'Scan for Hardware Changes' icon ( usually just below Help on the toolbar ).  Let windows reinstall the drive and see if it is now able to burn a disc.
    Regards,
    DP-K
    ****Click the White thumb to say thanks****
    ****Please mark Accept As Solution if it solves your problem****
    ****I don't work for HP****
    Microsoft MVP - Windows Experience

Maybe you are looking for