G4 Freezes Well Editing in Final Cut, Photoshop and Soundtrack

Well making minor cuts in Final Cut. My Computer will spin the wheel of death. I then force quit but that just freezes the entire system causing me to do a hard shutdown... Any test i can do to get to the root of my problem. I have plenty of Hard Drive Space and Running new software? What about heat issues?

Well making minor cuts in Final Cut. My Computer will
spin the wheel of death. I then force quit but that
just freezes the entire system causing me to do a
hard shutdown... Any test i can do to get to the root
of my problem. I have plenty of Hard Drive Space and
Running new software? What about heat issues?
Have you been to Utillities and verified/repaired Permissions for a start ?

Similar Messages

Someone help please!! half of final cut motion and soundtrack not working

Please help ! after i had to re-install my tiger after a leopard crash, my final cut soundtrack and motion bounce once in the dock, and then nothing happens. Everything else works fine. updated the latest updates too!. cannot re-install apps all greyed out. content disks where stolen so re-install is not a option. Please help. Final cut studio 2 half working? I'm a student and my project is due last week. Please help!

You need to re-install. I don't see any way around it. If you've altered the OS, you need a complete re-install.
Patrick

Final Cut Pro and Soundtrack Pro...

Hey I would like to know if Soundtrack Pro comes with Final Cut Pro...Because I can't find it anywhere in my computer but know someone that had SP include in FCP package...strange!
Help?

Can anyone tell me an email adress so I can contact apple, because I can not find SP, I did everything from installing the software again to watching the full tutorial dvd!
I didn't pay as much money to not having SP with it!

Any conflict installing Logic Pro 8 wtih Final Cut Studio2 and Soundtrack

I am an editor with Final Cut Studio 2 that comes with Soundtrack Pro. WillI have any problems installing Logic Pro 8 was it also included Soundtrack Pro?

WillI have any problems installing Logic Pro 8 was it also included Soundtrack Pro?
No.
(43826)

Round-tripping with Final Cut Pro and Soundtrack Pro problem

I sent project to Soundtrack Pro for audio repair, everything works fine until I hit save, I get a message saying that it could not be saved. Doesn't say why. I have plenty space in my drives. Unit suggestions?
Peter

See the answer on your other thread.
http://discussions.apple.com/thread.jspa?messageID=12426348#12426348
x

Which Mac Mini is best for Editing in Final Cut Pro X i5 or i7 ?

Hey guys plz suggest me a good mac mini machine for editing in Final Cut Pro X. Is there any difference in i5 mac mini or i7 in terms of rendering or editing, and what is the use of an SSD drive in terms of editing in mac mini either than its 5400rpm HD, or should i buy imac i5 with ssd ?
Lets see if i buy mac mini i5 with 16gb ram and a ssd drive, Will it work better than mac mini i7 with 16gb ram but without ssd drive ?
So guys plzz suggest me the best mac specs for video editing
Thanks in advance

Your budget?
Take a look at this: http://www.barefeats.com/minivmp.html
The 2012 Quad-Core i7 Mac mini is a real contender when it comes to CPU power compared to our examples of a Quad-Core Mac Pro and Quad-Core iMac. We plan to add some other examples of Quad-Core desktop Macs (including a faster Mac mini) to these graphs in the days ahead but the point is made.
However, the GPU in the 2012 Quad-Core i7 Mac mini is weak in comparison to the Mac Pro (and iMac) as you can see from the "Heaven" graph.
That's going to affect its ability to handle advanced Pro Apps that make use of the GPU for certain types of effect rendering.
These apps include Apple's Final Cut Pro and Motion as well as Adobe's Photoshop, Premiere Pro, and After Effects.
The Mac mini's Intel HD 4000 GPU will also hamstring hard-core gamers.
The Mac mini is also weak in support of OpenCL as you can see from the "LuxMark" graph.
It is forced to render the model using only CPU while the iMac and Mac Pro GPUs are able to render the model.
Why does this matter? Because apps like Final Cut Pro, Motion, and Photoshop use OpenCL acceleration for rendering certain effects.
http://www.barefeats.com/imac12p1.html
Even a Mac Pro (refurbished special 4-core 2.8 is $1819 and can be upgraded to more RAM, 4x4TB w/o going into Thunderbolt storage) and have multiple SSDs as the choice or need arises.)
Fusion drive + Thunderbolt but I think you are asking too much out of the mini. It is fine for a lot of uses.

What is the best product for converting MTS files (NOT on camera or in root directory) for editing in Final Cut

Hello all,
I have read the forums and know that I cannot use the Log and Transfer function on Final Cut Express 4.0 for my AVCHD files (from my Panasonic HC-V700) AFTER I have transfered the files out of the original root directory. Unfortunately, I did not know this until recently and I have a bunch of old footage in .mts form that I copied onto my harddrive WITHOUT the root directory. I now must get it into Final Cut Express 4.0.1. and I would like to use a Log and Transfer style program so that I can select what I need and erase the rest. I know about the program VoltaicHD which can be used for this purpose. I have not yet purchased it, but I will if this is my best option. The downsides to it are that it takes a lot of time to process the files (i hear from this forum) and that it creates extremely large files (hearsay from this forum, though I would like to know just how big those files are and how they compare to the size of files final cut creates). When I tried the trial version, I also noticed that unlike the log and transfer function in Final Cut Express 4.0.1, you cannot capture multiple subclips from a single clip. Well you can, but you have to load the clip into the viewing window again, which is not ideal.
I would love some more advice on this. I imagine other people have made this same mistake and have had to figure their way out of it.
I was also wondering is it possible to use Final Cut Express's Log and Transfer program directly from files if they are in a different file format. So far my experiments with this have failed. But if this is possible, I suppose I can also just convert all the backlogged files wholesale into a format that Final Cut Express supports more easily for Log and Transfer (What file format would this be? Sorry I am new to this). My new harddrive has a lot of free space, so I could probably handle the huge amount of storage that this would require for the raw footage and then I could erase it after I log and transfer just what I need. In which case, do folks have recommendations for a file convertor. I am dealing with over hundreds of files and I don't think the free online convertors would work. This product has been suggested to me, but I know very little about it.
Thanks!
Mira

I am also finding, when I use Voltaic trial version, that the quicktime movies it creates are of inferior quality than those created through log and transfer into final cut express and imovie, particularly during rapid movement. There's a lot of visible lines running horizontally around areas of rapid movement (not sure what the lingo is for this).
Anyway, now I am getting accustomed to the idea that my best bet is probably just a high quality converter to get my mts files into something more useable by final cut. At this point, I am willing to sit through the render time that it will take on final cut express while I edit. I am just trying to get my footage into workable format without losing quality.
Thank you!
Mira

Can't play mov files after update for MAC OS 10.6.8. Can't edit in Final cut anymore!

can't play mov files after update for MAC OS 10.6.8. Can't edit in Final cut anymore!. SHould i by a registration code for QT 7 Pro? I can't play mov files at all.. they were okay in my final cut time line. Now i can't see them!!! I can't import movies from my camera!!!
Help from Brazil!!!
Tks

David,
tks for your help !!!
Hi people, first, tks for Birdman308 for his link
https://www.hightail.com/dl?phi_action=app/orchestrateDownload&rurl=https%3A%2F% 2Fwww.hightail.com%2Ftransfer.php%3Faction%3Dbatch_download%26batch_id%3DOGhkZ28 xeWFiV3dYRHRVag
and makbookpro as well for his link
http://blog.lib.umn.edu/mcfa0086/discretecosine/164630.html
Now i can back to work!!!

I want to purchase a powerbook that will run a music program like MOTU or Pro Tools as well as run Final Cut Pro without being sluggish...any help?

I want to purchase a powerbook that will run a music program like MOTU or Pro Tools as well as run Final Cut Pro without being sluggish...any help?

The only way that would work out is if you ran exactly the versions that were made for old PowerBooks. Anything newer may require Intel and not run, or will strain the poor old G4 CPU.
Your needs have to be modest, too, because the problem with older music and video software is that they are not current as far as formats and codecs for the Web. If you want to output H.264, the current standard for YouTube/Flash video, older software may not support it, and in addition, H.264 is processor-intensive and is tailor-made for today's multi-core, 2+ GHz processors. It will overwhelm a G4. A PowerBook G4 can barely play YouTube videos.
More perspective: The PowerBooks worked great for miniDV format editing. In other words, 480i SD/standard definition video in use from the late 1990s to the late 2000s. If that is all you want to do, edit tape from an old miniDV camera to SD output, then OK.
But if you want to edit today's HD video, whether 720p from a snapshot camera/iPhone 4 or 1080p from a DSLR, the PowerBook and the software for it will either not recognize AVCHD/H.264, or it will slow the PowerBook to a dead crawl.
I'm in agreement with the above: Intel Macs have been out for so many years that getting a used one is a much better deal than a dead-end PowerBook. And I loved (still love) my PowerBooks.

G5 Power PC vs Imac...which is better for editing with final cut studio 2?

This is my present computer:
iMac 3.06GHz Core 2 Duo (2008 model)
4 gigs of 800 mhz ddr2 sdram (this is the max ram for this computer! )
NVIDIA GeForce 8800 GS 512 MB
Hard drive: 465 gig (I use mainly external drives for editing)
I use this mainly for video editing with final cut studio 2.
Rendering in compressor takes forever!!!
A friend suggested I pick up a used G5 Power PC.
I found this one, here are the specs:
APPLE POWER MAC G5 PowerPC DUAL CORE (2 x 2 GHZ)
System Mac OSX 10.5.8
RAM 12 GB
1 Hard drive of 160 Gb
Superdrive 16x CD/DVD/DL DVD (32x)
Video card NVIDIA GeForce 6600 (VRAM 256 Mb)
3 open PCI-Express expansion slots.
1x FireWire 800
3x FireWire 400
4x USB 1 and 2
2x Ethernet Port
2x Displays ports
Is this insanity or a smart move to move over to the older G5.
According to my friend, the older G5s are much better at processing video.
Is a dual 2 GHZ processor enough or would I need a 2.3 or 2.5?
OR is there another option that someone might be able to suggest?
I would be so appreciative of any opinions regarding this issue.
Thanks in advance.
Bill

Save your pennies and look for a refurbished or used MacPro. Early 2008 or newer 8 core machines w/8GB of RAM running 4 instances in QMaster will chew through material.
Beyond running compressor, it is just a better all round machine for editing video.
• it has multiple internal drive bays which run via SATA connections - much faster than the FW800 limits of the iMac for external drives
• it has 3 slots which give you the option of an i/o card from AJA, Blackmagic or Matrox so that you can actually monitor your video properly as well as ingest high end formats
• the slots give you the ability to connect esata raids for even higher data speeds
• you have much greater flexibility with computer monitors
• you have much greater RAM capacity
and so on ...
x

Convert mts files for editing in Final Cut?

Is there a way to convert mts files for editing in Final Cut Express or Pro?

Well, first, if you are talking about AVCHD video, FCE & FCP can directly import it from your camcorder. They will also import AVCHD from an SD card or even your hard drive provided you have saved the entire AVCHD folder structure, not just the .mts files by themselves.
If you only have the .mts files (without the surrounding AVCHD folder strucutre) then you should be able to use MPEG Streamclip to convert them to QuickTime/Apple Intermediate Codec for editiing in FCE. MPEG Streamclip is free and works great.
If that doesn't work, then look into ClipWrap, which has a $49.99 price tag.
This will work the same for converting .mts files to ProRes assuming you already have FCP installed, which gives you the ProRes codec.
FCE & FCP do not, however, directly import video from DSLRs because the camera manufacturers have each done some proprietary stuff in their implementation of video in their DSLRs. However, if you have a Canon DSLR & FCP (that is, FCP 7) there is a Canon EOS video plugin that will enable you import the video directly from the DSLR into FCP7. Not sure it's supported on Lion (10.7.x) just yet, but if you have a Canon DSLR it's worth a look.

What is my best hardware/software to convert vhs to digital so I can edit in Final Cut Pro X

What is my best hardware/software to convert vhs to digital so I can edit in Final Cut Pro X? Wondering if there is a solution under 100.00 or do I need to think a bit more. Thank you.

Have been doing this for some time, my setup:
I use an ancient "Symphonic" VCR player connected to an Elgato Eyetv Hybrid USB dongle. That plugs into my G5 Mac, 10.5.8, which runs Eyetv software v. 2.5.3.
Recording is dead simple after fiddling around a bit with software settings for channel, etc. Start the player, hit "record" on the software and wait for the end.
The recording is saved in some obscure ".eyetv" format with file size about 4 GB per hour of recording. The software has export to a variety of formats including QT Movie which results in a substantially larger file size.
Quality? Well, it's viewable and usable for archive purposes. I'm fine with it but more discriminating folks may want something better. I end up burning the video on a DVD using iDVD and that's not the greatest anyway.
There are various Elgato units available, and the Eyetv Hybrid seems to run bout $130.
Hope that helps.

AVCHD editing in Final Cut Studio 2 vs. HDV? Which workflow is smoother?

How is AVCHD editing in Final Cut Studio 2 compared to HDV?
I am in the process of buying a new camcorder.
Thinking about the Canon HV30, but I am considering AVCHD and the HG 10 or HF 10.
I just heard that AVCHD is tough to edit... Is this true?
I have a 24" iMac 2.8GHz Extreme Core 2 Duo with 4 Gb RAM, and I wonder if that would be enough horsepower to edit AVCHD. I also have a 1 terabyte Raid for storage.
I love the idea of being able to just transfer over clips rather than Log and Capturing through an entire dv tape, but is the workflow of AVCHD more work in the long run.
I am more concerned with workflow than even picture quality.
I have so far only worked in SD... so any thoughts from people with hands on experience and can give a good comparison of the two workflows would be greatly appreciated.
Thanks!

AVCHD isnt any harder to edit then HDV. We are running the SONY EX1 which is Sold State Camera. You have to use Sony XDCam Transfer software to get it into FCP.
Here is what we found.
AVCHD is a lot faster to ingest (ive found 4x realtime) and because you have to use the Sony XDcam Software for transfers you end up with better Loggin metadata (mostly because its easier at the time of transfer)
AVCHD is more expensive to run currently. With 16GB cards giving you 57 minutes of video they cost about 400 Pounds a card (im in the UK). On the plus side is you can view your footage instantly with a MacBooK Pro using the ExpressCard slot to plugin your solid state card and XDcam Viewer software.
Backup can be done in one of to ways. Use a SONY XDCam deck and store the footage on their XDCam Cartridges (way too expensive option). or use external Hardisk (we use 2 one for storage on location and second for Backup and later on for long term Storage in our Library).
When it comes to HDV we use the HDV-Z1 cameras and the process with the Z1 is just the same as with a consumer Level DV camera. It takes longer to ingest video because its realtime. But once in it runs fine. For backup its already done by the tape and again we store all Footage on Harddisk for long term storage once the project is done with the Tapes as backups. Oh.. and also the tapes are really cheap compared to the Solid state cards.
I have to say i was happy with AVCHD at first because the initial setup was very expensive. BUt once setup the workflow is smoother and faster the HDV tape based system. I do find the quality to be better as well on AVCHD.
I hope that helps

Plz give me work flow of film editing in Final Cut Pro..

Hello Everyone...
I am basically a Avid Film Editor. Past 2 years I am using Final Cut Pro. Recently I finished Final Cut Pro Level 1 & T3. Right now I am working as a App. Support Engineer specially for Final Cut Pro .
I want know the work flow of film editing in Final Cut Pro. I am very interested to do film editing in FCP but the workflow from Avid to FCP its totally different.
I tried few options like using FCP & Cinema Tools..
1. Captured 25fps clips and cofirmed to 24fps in cinematools.
2. In FCP the Timeline frame rate is 24fps
But I am not able to understand..
1. What is Database?
2. Cant we capture 24fps in FCP?
3. How to Synchronize captured clips with Cinema Tools database?
4. How to link the captured clips in to Cinema Tools database?
5. Where do I enter the KN Start & KN End?
6. What about Pull List & Cut List?
Please give me the details of film technics in Final Cut Pro....
Thanks in advance....

I knew I'd find this same post here. That makes three versions of trhe same list of questions.
Posting three times here implies you have posted this set of questions in many other FCP forums around the Net. If that is so, do us all the kindness of returning to all of them and closing them. Include the suggestions you have received and the solutions that were successful for you. That way your multiple threads will show up on search inquiries when other confused FCP newbies try to start complex film projects.
It's a bummer you cannot find these answers in the FCP manuals, I'm usre you looked there first. But, since we run on volunteers around here, it may be several days before someone with enough practical CinemaTools experience can stop by and handle them for you. Please have some patience.
bogiesan

If i edit in final cut pro x, how can i create a dvd

What is the best DVD creator to download to create DVDs from movies edited in Final Cut Pro X?

iDVD gets my top vote - it is no longer available from Apple, but still part of the retail iLife 09 or 11 versions available from online resellers. It offers customizable menus/themes which will give your creation a professional look. It encodes/authors and you can burn directly from it.
Second is Roxio Toast (no customizable menus, but many other features and an excellent burn software).
I've tried DVD creator and found it to be too simplistic. Then there is Burn (free) - it burns.
I use iDVD to "create" and Toast to burn.

G4 Freezes Well Editing in Final Cut, Photoshop and Soundtrack

Similar Messages

Maybe you are looking for