G4 Freezes with fresh install of Panther

Posted here :
http://discussions.apple.com/thread.jspa?threadID=507569&tstart=0
Here's a short re-cap of the G4-350mhz (AGP graphics) with 512mb ram (4x 128mb kingston ram), 40gb hdd, ATI rage128, USb mouse/keyboard
1. Fresh install (erase/partition etc) of panther, machine freezes randomly
2. updated all with software update and freezes EVEN MORE. it got so bad that moving mouse to task bar will freeze everything.
3. when it freezes. Nothing else works accept the reset button (keyboard will not do any thing)
Any pointer and help apperciated.

I hope you try a Mac again (a good one this time!). I truly believe you will never go back once you own a good one!
Cheers!
DALE

Similar Messages

Can I sync my iPhone to a new PC with fresh install of iTunes without erasing my phone. (sorry for the typo in original question)

Can I sync my iPhone to a new PC with fresh install of iTunes without erasing my phone. (sorry for the typo in original question)

Syncing to a "New" Computer or replacing a "crashed" Hard Drive

Macbook Pro stuck in restart loop with fresh install

Hello!
I have a Macbook Pro (Mid 2009) that I have been running Snow Leopard on up until now. I had been meaning to upgrade to Mavericks for a while, but had just never gotten around to it. Over the last month or so, my Macbook has been running really slow, hanging on the spinning beachball every few minutes for a few seconds (sometimes up to a minute or so). So I figured a clean start might be the best way to go, and while I'm at it, I might as well upgrade to Mavericks.
I backed up all my data, and then I created a Mountain Lion bootable usb (I had trouble making a Mavericks bootable usb from Snow Leopard, and since I had bought Mountain Lion for my desktop, I just decided to do a fresh install of that, and then upgrade to Mavericks). I had no problem booting to the usb, erased my hard drive and did a fresh install of Mountain Lion. However, after the install on the usb, my mac restarted and got stuck in a restart loop. It will chime, show the apple logo and spinning gears for a few seconds, then the gears stop spinning, and then the mac immediately restarts (this time displaying a message saying the mac has recovered from a shutdown in a number of languages), and the same thing happens again.
I was able to boot into the recovery partition, checked the permissions, found some that needed to be fixed, ran the repair permissions, verified the disk and was told the disk appears okay. Tried to then restart and same thing.
I have reset SMC, NVRAM, and none of these change anything. I booted in single user mode and ran fsck -fy, and recieved a message saying modifications were made, rebooted, same thing.
I have booted in verbose mode and the system restarts at the same point every time, right after displaying a message that says
SMC::smcReadKeyAction Error: (and then something with "BEMB", it goes by really fast so its hard to read exactly)
I have managed to boot into safe mode, but this has not made a difference. On one of my boots into safe mode, I went ahead and made a Mavericks bootable usb, and restarted the process: wiped the drive, installed mavericks, but I am in the exact same situation. I can still boot into safe mode.
I have seen some other issues that people have posted, but most involve the system freezing after the apple screen (not restarting) or do not involve freshly formatted HDs.
I'm just tying to find out if this is a hard drive issue, or if my mac itself needs to be retired. It has had a pretty long life (being 5 years old), and one of the RAM bays doesn't work (it is only running 4GB of ram, not sure if that can cause a problem with the boot cycle).
Sorry if thats a lot of information, I've been trouble shooting this for a few days. But thanks for any help you can offer!
A strange note:
-when booting from the mavericks usb, I got stuck in the restart loop a couple of times. I managed to get past this by clicking the mousepad a few times right after the gears finished spinning. The mouse became visible, the apple screen shifted color a bit (went from a bluish gray tint to an orangish gray tint), the mouse became visible, and I got to the reinstall menu as normal. As far as I can tell the clicking may have been coincidental, but it was the only time I was able to boot the usb, and I wasn't going to risk restarting to test that, and then not be able to boot again.

Hey, thank you for your reply! I didn't have everything backed up, but I have a lot of my important stuff saved, though, so that's somewhat of a relief..
As far as my hard drive is concerned, would I have to send it in somewhere to get it fixed or would I just have to get a brand new one? If so, how much? Sorry if I seem a bit amateur, but this computer is my first personal computer, and I'm really lost without it!

G555 (0873) error loading operating system with fresh install of XP

Hello,
I am in need of assistance. i had XP Pro installed and functioning on my Lenovo G555 0873, but due to a bad virus i received in email I needed to reload XP because it corrupted everything. Just use it for some games so wasn't worried about data. But now I get an error loading operating system after fresh install of XP Pro, Computer formats drive copyies files and restarts like itis supposed then Operating system is lost? Can you help me?
Xtiansdomain

hey Xtiansdomain,
i do hope that you created recovery media via One Key Recovery. If you did, use that to recover your system.
however if no recovery media was made, get in contact with the support crew via : http://bit.ly/LNVsuppNum
WW Social Media
Important Note: If you need help, post your question in the forum, and include your system type, model number and OS. Do not post your serial number.
Did someone help you today? Press the star on the left to thank them with a Kudo!
If you find a post helpful and it answers your question, please mark it as an "Accepted Solution"!
Follow @LenovoForums on Twitter!
Have you checked out the Community Knowledgebase yet?!
How to send a private message? --> Check out this article.

TTY problems with fresh install

HP Compaq 8510W
Fresh install of 32-bit Arch
I have had 64-bit Arch running on this laptop without incident---until the last upgrade broke Flash..:( (But that's another story.....)
Now, I have just installed 32-bit Arch and--after doing some setup and configuring--the TTYs quit working. Ctrl-Alt-F1, F2, etc. produces only a brightly-colored screen with random letters and numbers. A re-install cured it, but only for a short while.
The symptoms suggest an issue with a video driver, but I don't know what driver is used when toggling to a TTY.
As I write this, I am running from Ubuntu, and all is well.
Any ideas??

Hello Neighbor,
Are you encountering these problems after starting an X session when you try to switch back to a console, or does this happen in the absence of Xorg?
What is your video architecture in that HP? My Pavilion is Intel GM45 (intel915). These types of problems went away for me about a year ago. On Intel, if I recall correctly, it was imperative that you not load any framebuffer console mode kernel drivers in the presence of KMS. The only module that can be loaded is the KMS Intel frame buffer support module.
You might check the modules you are forcing, and you might play with disabling KMS from the kernel command line.
I am in Northeast Pasadena (Brigden Ranch area). Are you anywhere close?

Using Upgrade License on UCCX 8.0 with "Fresh Install" setup

Hi all,
My situation right now is that I want to install UCCX 8.0 (on a VM environment) and I don't have any previous UCCX version deployed, but the licenses I have are :
- an Upgrade License from ver.5 to ver.8
- a PAK and SW kit license (also contains the seats licenses) for UCCX version 5.
Because I don't have any previous UCCX version deployed, I installed UCCX 8.0 and chose "Fresh Install". When I upload the upgrade license, the server returned a warning that said "The license for Cisco Unified CCX Premium Seat ESW or UCSS Upgrade is not a valid addition for the package None and therefore it will be ignored" and "The license for Cisco Unified CCX Premium ESW or UCSS Upgrade is not a valid addition for the package None and therefore it will be ignored".
My questions are :
- Can I use the licenses I have on a fresh installation of UCCX 8.0 ( the upgrade license and the ver.5 license) ? Because I've tried similar scenarios with the licenses on Unity Connection and it worked. I'm wondering if it's not possible with UCCX 8.0 and that's what caused the error.
- If the answer for the "Fresh Install" path is No, does it mean I have to use the "Upgrade" path -what I'm trying to avoid if I can- meaning that I have to install ver.5 first and then upgrade it to ver.8 using PUT( ? Because on the initial setup If I choose "Ugrade from previous version" it will ask where the data from the previous version are located and right now I don't have any.
Thanks in advance.
Regards,
Regi

Thanks for the answer Hoai Huynh (and Aaron for adding the info).
Just what I was worrying about, I need to build a ver.5 first. I would appreciate it if you can answer a few last questions if you don't mind :
So, I need to install UCCX v.5 and also CM v.5 (because my CM v.8 is not supported by UCCX v.5).
Can the UCCX ver.5 data from the migration tool (PUT) be used on the UCCX v.8 that is integrated with different CM server (different IP address, different credentials, etc) ? Because the steps in the UCCX v.8 upgrade guide are describing a scenario where the CM is the same server and is being upgraded at the same time with UCCX.
Related to no.1 question, Is there anything I should be aware of when setting up the UCCX ver.5 and CM ver.5 ? For example : need to have same IP addresses with the version8 servers, same AXL / application user name and password, etc.
At exactly what point of configuration on UCCX v.5 can I use the PUT to migrate data from the ver.5 (the guide only mentioned to make sure that the server is up and running)? Can I do it right away after the first initial setup ? Or do I need to configure a working application to get all the subsystems in "full-service" first ?
Thanks again.
Regi

Problem with Fresh Install of OEL 6.3 x86_64 over old OEL 6.0 x32

Dear Experts,
After selecting packages for fresh installation of OEL 6.3 x86_64 over old OEL 6.0 32-bit, it gives me the following warning
Some of the packages you have selected for install are missing dependencies. You can exit the installation, go back and change your package selections, or continue installing these packages without their dependencies.
Details
lvm2-2.02.83-3.el6.i686 requires lvm2-libs = 2.02.83-3.el6
kernel-uek-2,6,39-200.24.1.el6uek.x86_64 requires kernel-uek-firmware = 2.6.39-200.24.1.el6uek
lvm2-3.02.72-8.el6.i686 requires lvm2-libs = 2.03.72-8.el6
gdb conflicts with elfutilsHow to avoid this warning?
Best Regards
Mahmoud

Hi Dude,
Thank you for your response.
I didn't choose upgrade. I chose Fresh Installation.
Sorry for not giving background about the problem
The OEL 6.0 x32 was installed on a server with 64bit architecture, so the power of the server is not utilized well.
I want to completely replace the OEL 6.0 (32 bit) system with OEL 6.3 (64 bit)
Just I choose the mount point of /root and /boot and leave the all partitions with no formatting to save the old data
The above warning in the first post appears. How to avoid it?
Regards
Mahmoud

Namespace problem with freshly installed 8298731

We have a number of existing B2B installations patched to 8298731 that are working correctly. Recently we performed a clean install of a new server and patched it to 8298731 as well (upgrading to 10.1.2.3 in the process). It has been configured in the same way as the existing servers as far as we can tell.
The inbound EDIFACT messages from the new server all get "http://www.edifecs.com/xdata/100" as their namespace. Identically configured agreements with the same ecs/xsd files in the old servers yield correct namespaces, i.e. "urn:oracle:integration:b2b:FA335C8BE96E48F787F88928B5D21132".
As the same files are used the error should not be in SpecBuilder/Document Editor. We have not modified the files, but have tried uploading them fresh to both the new and one of the old installations. The files are fine.
The patch list from opatch displays only 8298731 for all the environments.
I have tried purging the new environment and configuring it again. I don't quite dare to purge the old working environments in order to test if that breaks them, as that would stop several development projects.
What could be wrong?

We will try, I'll get back to you on that. It is on Linux (Red Hat 4, x86).
Meanwhile I have found that the ip/oem/edifecs directory differs between the installations. A difference that is easy to spot is that the JavaDoc in ip/oem/edifecs/XEngine/help/JavaAPI is for build 826 in the newly installed server (that doesn't work) and for build 837 in the ones that work. Binaries (such as .so files) differ as well.
Can it be that something is not updated in patch 8298731?
The old servers that work were all installed a long time ago and have been updated regularly with MLR patches. The new server that fails was installed, upgraded to 10.1.2.3 and then patched directly to 8298731. Perhaps that leaves some files unpatched, or perhaps the patching process failed without saying so?

Decisions with fresh install in windows 7 64 bit

Hi community,
I'm setting up a new laptop running windows 7 64 bit, and I'm trying to decide the best way to serve Application Express.
I count 5 main options
1) Embedded Gateway
2) Install the complete 11g "companion" tier
3) Use Apex Listener EA with WebLogic Server
4) Use Apex Listener EA with Tomcat
5) Use Apex Listener EA with OC4J
I don't want to use the embedded gateway, and I want to keep things fairly light on the laptop.
This page offered concise setup instructions for the three options with the Apex Listener
http://www.oracle.com/technology/products/database/application_express/html/apex_listener_install_web.html
But after trawling many comments on one major thread, I can't determine the pros and cons for these options. I was wondering if anyone can provide a link or information with concise details why you'd choose one option over the other?
Once Apex Listener moves past EA, will it perhaps be advantageous to have selected one over the other? Is it easy to roll back installation of certain options?
I'm leaning towards WLS, since that has ties with othe Oracle components, but Tomcat seems thin an non-invasive for my laptop.
Thoughts?
Scott.

I've ended up using the new production release of Apex Listener with Glassfish.
Good work on the new installation instructions, they are much more informative.
My major hurdle with Glassfish was attempting to use the JDK that came with 11gr2. It took a colleague to spot I was using 1.5.x instead of 1.6.0.20 - I sourced this version from my Windows 7 64bit install.
Now to attempt installing 10gR2 with Apex3.2 on the same box

Fail with quickstart with fresh install the All-in-one Installer

Hi all,
I install the quick install with all-in-one installer, and start the Endeca Server from program menu, and then I can get to the http://localhost:8080, and login successfully.
Then I start the Integrator, open the quickstart project, but when I try to run the Baseline.grf it get fail with:
IERROR [WatchDog] - Graph execution finished with error
ERROR [WatchDog] - Node WEB_SERVICE_CLIENT0 finished with status: ERROR caused by: org.apache.axis2.AxisFault: Read timed out
ERROR [WatchDog] - Node WEB_SERVICE_CLIENT0 error details:
com.opensys.cloveretl.component.ws.exception.SendingMessegeException: org.apache.axis2.AxisFault: Read timed out
     at com.opensys.cloveretl.component.ws.proxy.b.b(Unknown Source)
     at com.opensys.cloveretl.component.ws.proxy.b.a(Unknown Source)
     at com.opensys.cloveretl.component.WebServiceClient.a(Unknown Source)
     at com.opensys.cloveretl.component.WebServiceClient.execute(Unknown Source)
     at org.jetel.graph.Node.run(Node.java:414)
     at java.lang.Thread.run(Thread.java:619)
Caused by: org.apache.axis2.AxisFault: Read timed out
     at org.apache.axis2.AxisFault.makeFault(AxisFault.java:430)
     at org.apache.axis2.transport.http.HTTPSender.sendViaPost(HTTPSender.java:193)
     at org.apache.axis2.transport.http.HTTPSender.send(HTTPSender.java:75)
     at org.apache.axis2.transport.http.CommonsHTTPTransportSender.writeMessageWithCommons(CommonsHTTPTransportSender.java:389)
     at org.apache.axis2.transport.http.CommonsHTTPTransportSender.invoke(CommonsHTTPTransportSender.java:222)
     at org.apache.axis2.engine.AxisEngine.send(AxisEngine.java:435)
     at org.apache.axis2.description.OutInAxisOperationClient.send(OutInAxisOperation.java:402)
     at org.apache.axis2.description.OutInAxisOperationClient$NonBlockingInvocationWorker.run(OutInAxisOperation.java:442)
     at java.util.concurrent.ThreadPoolExecutor$Worker.runTask(ThreadPoolExecutor.java:886)
     at java.util.concurrent.ThreadPoolExecutor$Worker.run(ThreadPoolExecutor.java:908)
     ... 1 more
Caused by: java.net.SocketTimeoutException: Read timed out
     at java.net.SocketInputStream.socketRead0(Native Method)
     at java.net.SocketInputStream.read(SocketInputStream.java:129)
     at java.io.BufferedInputStream.fill(BufferedInputStream.java:218)
     at java.io.BufferedInputStream.read(BufferedInputStream.java:237)
     at org.apache.commons.httpclient.HttpParser.readRawLine(HttpParser.java:78)
     at org.apache.commons.httpclient.HttpParser.readLine(HttpParser.java:106)
     at org.apache.commons.httpclient.HttpConnection.readLine(HttpConnection.java:1116)
     at org.apache.commons.httpclient.MultiThreadedHttpConnectionManager$HttpConnectionAdapter.readLine(MultiThreadedHttpConnectionManager.java:1413)
     at org.apache.commons.httpclient.HttpMethodBase.readStatusLine(HttpMethodBase.java:1973)
     at org.apache.commons.httpclient.HttpMethodBase.readResponse(HttpMethodBase.java:1735)
     at org.apache.commons.httpclient.HttpMethodBase.execute(HttpMethodBase.java:1098)
     at org.apache.commons.httpclient.HttpMethodDirector.executeWithRetry(HttpMethodDirector.java:398)
     at org.apache.commons.httpclient.HttpMethodDirector.executeMethod(HttpMethodDirector.java:171)
     at org.apache.commons.httpclient.HttpClient.executeMethod(HttpClient.java:397)
     at org.apache.commons.httpclient.HttpClient.executeMethod(HttpClient.java:346)
     at org.apache.axis2.transport.http.AbstractHTTPSender.executeMethod(AbstractHTTPSender.java:550)
     at org.apache.axis2.transport.http.HTTPSender.sendViaPost(HTTPSender.java:189)
     ... 9 more
INFO [WatchDog] - [Clover] Post-execute phase finalization: 0
INFO [WatchDog] - [Clover] phase: 0 post-execute finalization successfully.
INFO [WatchDog] - Execution of phase [0] finished with error - elapsed time(sec): 600
ERROR [WatchDog] - !!! Phase finished with error - stopping graph run !!!
INFO [WatchDog] - -----------------------** Summary of Phases execution **---------------------
INFO [WatchDog] - Phase# Finished Status RunTime(sec) MemoryAllocation(KB)
INFO [WatchDog] - 0 ERROR 600 16351
INFO [WatchDog] - ------------------------------** End of Summary **---------------------------
INFO [WatchDog] - WatchDog thread finished - total execution time: 600 (sec)
INFO [main] - Freeing graph resources.
ERROR [main] - Execution of graph failed !
and the start Endeca Server window is stop on Starting
2012-12-14 22:09:48.043:INFO:oejs.AbstractConnector:Started SelectChannelConnect
[email protected]:7770 STARTING
Any help is really appreciate.
Thanks,
Jason.

Baseline.grf is not able to connect to Endeca Server. Make sure Endeca Server has started correctly and then run baseline.grf graph.
Regards,
Srikanth

Insert performance in same specification machines with fresh install

Hi all,
I has some problems testing my fresh oracle 11g2 installation in Win7 O.S. We have two EliteBook 8760w, purchasing at the same time and installing estandar edition and other programs using the same procedure.
After that, we start making a massive insert in the database (near 70GB of data). In one of these laptops, the duration of the insert was 4 time more than in the other.
Other proccesses took more or less the same time, but inserts still take four time more.
Anyone can bring me some light about the cause?
Thanks for all :)
Regards,

953955 wrote:
Hi all,
I has some problems testing my fresh oracle 11g2 installation in Win7 O.S. We have two EliteBook 8760w, purchasing at the same time and installing estandar edition and other programs using the same procedure.
After that, we start making a massive insert in the database (near 70GB of data). In one of these laptops, the duration of the insert was 4 time more than in the other.
Other proccesses took more or less the same time, but inserts still take four time more.
Anyone can bring me some light about the cause?
Thanks for all :)
Regards,post FORMATTED EXPLAIN PLAN from both INSERT statements

Preserving play data with fresh install

Due to a catastrophic error and probably too much trying to repair it without assistance, I'm forced with the prospect of uninstalling iTunes (9.0) and reinstalling 9.2. However, I've accumulated 7 years of playlists and play data that I'm unwilling to lose. Does the assembled wisdom here believe that there are files within the iTunes folder that, left alone, will remain in place after a complete uninstall and reinstall?
Specifically, I see rather large files in C:\(user)\Music\iTunes (OS = Vista 64-bit) with names like iTunes Library.itl and iTunes Music Library.xml, many of which appear to have been updated the last time I was able to launch iTunes.
Is the wise course of action to back up (or move entirely) those files, perform the un/re-install, then move them back into the iTunes folder?

So, I've backed up my entire iTunes folder, ran the uninstall directions for 64-bit Vista, uninstalled and deleted everything as listed at the appropriate window in http://www.apple.com/support/itunes/, and the installation still refuses to complete. The first attempt threw an error listing an insanely long registry key. Subsequent attempts using the Repair option in the installer says the install has completed successfully, but iTunes Helper then throws an error reading
"Apple Application Support was not found.
"Apple Application Support is required to run iTunesHelper. Please uninstall iTunes, then install iTunes again.
"Error 1"
For the record, I've had zero problems with iTunes since its first Windows release (including syncing with two different iPods over the past three years). It wasn't until I was forced into the 9.2 upgrade to sync my new iPhone4 (from 9.0.something) that I experienced this problem at all.
Since I can't get my iPhone serial # without iTunes, and can't launch iTunes, I can't get through the procedure to open a support call.
If anyone has any insight into how to get out of this ridiculous situation, I'd appreciate it.

Just bought a Macbook pro 17" 2.16 with 2gb ram and 500gb 5400 HD. IT RUNS VERY SLOW, even with fresh install of X 10.6, what do I do?

So I just bought a great condition Macbook pro 17" with 2gb of ram, and the last owner upgraded the HD to a 500gb toshiba 5400rpm HD....the computer is VERY slow....when loading up anything it take forever, and watching video's freezes it for a few seconds then starts for a 1-3 seconds then freezes again....what can I do? I really like the laptop, but hate the performance...and I don't want to go buy another one....but I have considered a SSD....any idea's before I do that?
Thanks.

How much hard drive space do you have left?
Sluggish Finder - Bunch of icons on your desktop? An overcrowded desktop slows down your Mac.
Get rid of needless Finder calculations - Open a window in Finder/View/Show View Options: ensure "Calculate All Sizes" option is unchecked.
Internet related - It's likely that your broadband connection is the bottleneck. You can check your speed on http://www.speedtest.net to see how fast your connection is. If your web browser specifically performs slowly, quit and relaunch it.
If browser remains sluggish, empty its cache.
Safari/Empty Cache
Firefox/Preferences - select the Network tab of the Advanced preferences and click the "Clear Now" button in the "Offline Storage" area.
Application related - Launch "Activity Monitor" - Applications/Utilities - click the CPU heading and see what float to the top. If an application takes up a large chunk of CPU and won't let it go, it could be dragging down your Mac's performance. Quit it by clicking the Quit Process button at the top of the Activity Monitor window.
Too little ram - max out your ram.

Soundcard not recognized with fresh install of Windows XP h

My brother-in-laws computer was having many issues with restarting and after spending a couple weeks trying everything I know to try, I decided just to reformat. Before the reformat, his soundcard was working just fine (Soundblaster Audigy 2 ZS). Now since the reformat, fir whatever reason, Windows doesn't recognize the card. Just says multi-media something or another with a yellow exclamation point. I downloaded the latest driver for the card and that as it's starting to install says that it is unable to locate a soundblaster device. The onboard card is disabled through BIOS. I am at a loss for what to do. Any ideas?

I have the same problem with my SB Li've! soundcard. When I try to install the drivers from Li'veDrvUni-Pack(ENG).exe it says that no SB device can be found on my CPU. I don't have my installation CD and my connection speed is too low to download the new one from BadBoy. Can you help?

SSH/PAM login issue with fresh install: edit wiki or raise bug?

I recently encountered an issue while setting up Arch on a headless server, and was wondering if I did something stupid, the documentation should be improved or I found a bug.
The problem was that after adding a new non-root user, I couldn't SSH into that user account. I could still login to root via SSH fine. After some research and playing around I found I was able to login by setting UsePAM to no in /etc/ssh/sshd_config. I later realised that this was because I set the login shell for this account to /usr/bin/bash, and not /bin/bash. The problem is that currently /usr/bin/bash is not in /etc/shells, and the default /etc/ssh/sshd_config sets UsePAM to yes.
As this is a new default install, and I followed the wiki during the install, I feel that this should have been documented somewhere. I don't mind changing the wiki or reporting this as a bug, just I'm not sure which is the correct course of action:
1. Should I have known to use /bin/bash and not /usr/bin/bash, i.e. the login shell needs to be in /etc/shells? => edit the wiki [1]
2. Should /usr/bin/bash be in /etc/shells? => raise a bug against filesystem [2]
Related:
[1] https://wiki.archlinux.org/index.php/Gr … management
[2] https://projects.archlinux.org/svntogit … unk/shells
[3] https://bugs.archlinux.org/task/35724
[4] https://bbs.archlinux.org/viewtopic.php?id=166464
Last edited by quigybo (2013-11-02 17:34:42)

The wiki should be changed. /bin/bash is the correct entry in the list of shells.
I cannot, however, remember off hand in which context this came up. I just remember this was the developers' response. So I can't point you to evidence to confirm even though I do know that is the correct answer.
EDIT: https://bugs.archlinux.org/task/33677
https://bugs.archlinux.org/task/33694
Last edited by cfr (2013-11-03 03:56:49)

G4 Freezes with fresh install of Panther

Similar Messages

Maybe you are looking for