G4 iBook 1.33 (mid-2005) airport card install instructions?

I asked this question in an earlier post but the title was misleading, I think.
I need to reseat my Airport Express card and I don't know where it is or how to do it. Please point me to the appropriate URL that has diagrams.
I've searched and searched and can't find it.
ibook g4 1.33 12"   Mac OS X (10.4.7)  

In case you haven't already found out, the 1.33 (mid-2005 model) iBook is the only model without user-access to the airport card. In order to have it re-seated or replaced, you have to take it to an Apple Tech.

Similar Messages

  • Did all dual-USB iBooks have an airport card installed by default?

    Did all dual-USB iBooks come with an airport card installed? I ask because I just bought one from eBay (http://cgi.ebay.com/ws/eBayISAPI.dll?ViewItem&item=270303646742) (model M6497) and the owner didn't know if it had an airport card installed. Of course, I don't know if the laptop's been modified at all, I was just trying to get an idea of how likely it was that it would come ready for wireless. Thank you

    Possible sources for the original AirPort Card:
    http://www.macofalltrades.com/AppleOriginal_Airport_Card_APp/airport1.htm
    http://www.dvwarehouse.com/Apple-Original-AirPort-Wireless-Card-802.11B-p-31366. html
    http://eshop.macsales.com/item/Apple/M7600LLE/
    http://www.synaptech.com/catalog/index.php?mainpage=index&cPath=4953
    http://www.teksale.com/laptops/laptopparts/listings/apple-airport-original.htm
    http://www.megamacs.com/v1/?action=view&pid=967052
    http://www.macrecycling.com/apple-airport-card-ibook-g3g4-powerbook-g4-p-100531. html
    http://memorysolutions.com/memorysolutions/orapaica1.html
    http://store.airportcardsdirect.com/
    http://www.powerbookguy.com/xcart/catalog/Airport-Cards-price0-p-1-c-507.html
    http://www.ifixit.com/cart/catalog/product98_AirportCard.html
    http://techrestore.com/xcart/product.php?productid=16174
    Links priced low-to-high, last checked November 9, 2008.
    Installation instructions can be found in this Knowledge Base article:
    http://docs.info.apple.com/article.html?artnum=111919

  • No airport card installed

    Mid 2010 13" MBP (MC374LL/A). Have tried everything: reset PRAM, reset SMC, reinstall Snow Leopard, hold power button for 10 sec, repair disk/disk permissions, apple hardware test. Nothing works. I've seen a lot of people mentioning the airport cable being bad or being loose but I'm confused. I thought on these computers the airport cable also transmits the iSight and bluetooth, both of which are working fine. Or am I wrong on this? Any help would be greatly appreciated. https://www.ifixit.com/Guide/MacBook+Pro+13-Inch+Unibody+Mid+2010+AirPort+Card+R eplacement/6024

    Just pipeing in to say that this just happened to me yesterday. All of a sudden, out of the blue, when the computer started up, it no longer recognized that there was an airport installed. Tried everything... boot with out, then with; diskwarrior; disk repair; reinstall airport software; make sure firmware current; just plain trying to reseat the device. I'm at a loss.
    I'll try to take it into the Apple store today. But man is it frustrating to have them tell you, "sorry, it's broken, you need a new one." I seem to hear that way too often.
    Well, if you've got any input, let me know... otherwise, I'll report back afterwards.
    , Josh

  • "No airport card installed" only in swedish mode?

    Hi all, got this problem with my Macbook pro!
    Recently when I was reconfiguring my wifi-network (assigning my time capsule as main router and the modem I got from my ISP as a "bridge"), I noticed that my airport card was acting strange.
    The problem is that it says "No airport card installed", but I still got internet connection and can surf/download stuff without a problem. Also, when I go into "System preferences/Network" I can see my airport connection and turn it on/off. Although when I click "Advanced" nothing happens.
    I've tried several things but none seems to work, and I'm not sure its an hardware issue. Anyway, this is what I've tried:
    1. Rebooting (several times) = Didn't work
    2. Resetting PRAM and NVRAM = Didn't work
    3. SMC-reset = Didn't work
    4. Rebooting into Windows XP via bootcamp = Airport card detected and working just fine
    5. Restoring older save via time capsule = Didn't work
    6. Format and reinstall Snow leopard and restore older save via time capsule = Didn't work
    7. Format and reinstall Snow leopard (again) = Didn't work...-ish?
    Now, here's the strange bit. As I log in to a new account with english as main language I notice that the wifi-icon on the top dashboard now is filled (it was greyed out and only said "No airport card installed [in swedish ofc]) and I can now click it, change network and all that stuff. Although, when I go to "System preferences/Language & text" and change my preferred language to swedish and log out & in, the same problem occurs (greyed out wifi-logo, no airport card installed etc.)
    So, I'm totally confused. Halp?

    Have you done a PRAM reset, CMD+Option+p+r...
    http://support.apple.com/kb/HT1379
    In fact, do 3 in a row, takes a bit of time.
    "Try Disk Utility
    1. Insert the Mac OS X Install disc, then restart the computer while holding the C key.
    2. When your computer finishes starting up from the disc, choose Disk Utility from the Installer menu at top of the screen. (In Mac OS X 10.4 or later, you must select your language first.)
    *Important: Do not click Continue in the first screen of the Installer. If you do, you must restart from the disc again to access Disk Utility.*
    3. Click the First Aid tab.
    4. Select your Mac OS X volume.
    5. Click Repair Disk, (not Repair Permissions). Disk Utility checks and repairs the disk."
    http://docs.info.apple.com/article.html?artnum=106214
    Then try a Safe Boot, (holding Shift key down at bootup), run Disk Utility in Applications>Utilities, then highlight your drive, click on Repair Permissions, reboot when it completes.
    (Safe boot may stay on the gray radian for a long time, let it go, it's trying to repair the Hard Drive & clear caches.)
    If perchance you can't find your install Disc, at least try it from the Safe Boot part onward.
    If that doesn't help Reinstall the OS.
    If that doesn't do it, the card has likely died.

  • "No Airport card installed" after 10.5.8 update

    Just upgraded the latest Leopard update 10.5.8 and, after restart, the Airport icon in my menu bar says "No Airport card installed".
    I've been into System Prefs and tried to switch it on, but nothing. I've even been into the system profiler and, when I look under Network > Airport card it says no information found.
    I'm on a two-week-old 13" MacBook Pro, which has been working fine with its Time Capsule since it was bought.
    Cheers in advance.

    HI,
    Try the 10.5.8 combo update available here.
    http://support.apple.com/downloads/MacOS_X_10_5_8_ComboUpdate
    As with any installation, repair disk permissions.
    Quit any open applications/programs. Launch Disk Utility. (Applications/Utilities) Select MacintoshHD in the panel on the left, select the FirstAid tab. Click: Repair Disk Permissions. When it's finished from the Menu Bar, Quit Disk Utility and restart your Mac. If you see a long list of "messages" in the permissions window, it's ok. That can be ignored. As long as you see, "Permissions Repair Complete" when it's finished... you're done. Quit Disk Utility and restart your Mac.
    Carolyn

  • System extension cannot be used, now no AirPort Card Installed?!?!?!?!

    I have had my MBP for some time now and the other day it went into a kernel panic and after having to go through all the processes to recover it including restoring from the time capsule so that it doesn't take over 10 mins to start up an error message came up saying;
    "*System extension cannot be used*"
    "the system extension '/System/Library/Extensions/IO80211Family.kext/Contents/PlugIns/AppleAirPortBrc m4311.kext' was installed improperly and cannot be used. Please try reinstalling it, or contact the product's vendor for an update"
    Now i cant use my airport card at all, it says that there is no airport card installed and I have spent hours on the phone to apple, done the option + command + r + p thing and had to restore my whole system off my TC with the backup disks and all.
    Plz plz plz plz help, i just want it back the way it was, this is so annoying
    Message was edited by: TBlank

    I had the same problem. It happened to me after I updated to 10.5.6. I didn't notice the problem until I rebooted a few days later. I reinstalled the system from disk and then realized that even though it took almost an hour it didn't really install anything. So I deleted the whole /System/Library/Extensions/IO80211Family.kext and reinstalled the system again. This time it worked

  • "No airport card installed" error message onMacBook Air.

    Early today, my Macbook Air froze and I had to restart it by holding down the start key.   Since the, I've been getting a "no airport card installed error messge".  I've tried resetting the PRAM but it did not fix the problem.  I've also tried running the hardware check through a powerdrive but I get a message saying hardware check cannot be run on this machine.  Any suggestions about what to try next?

    Yes, you should remove and reseat the Airport Extreme card. It may just have been jostled in its slot and not be making good contact now.

  • G4 without airport card installed

    Hi, ive got a G4 lamp style imac without a airport card installed. I have a wireless route connected to the above mac. Installed the airtunes software and it says airport card not found.
    Does this mean I have to buy and airport card or can I connnect to the airport express basestation using my wireless router?
    many thanks

    David White15:
    A Base Station won't "detect" a remote Base Station - ie you cannot just use an Airport Express, cabled to a Mac, as a replacement for an Airport card without first performing the required configuration of both Airport Express devices.
    What you first need to do is set up a wireless distribution system (WDS) between these two Airport Express devices. Since you apparently don't have an Airport card equipped Mac to help you perform the configuration, you must configure each device manually, one at a time, with a direct cabled connection using the Airport Admin Utility. The general instructions are found at:
    http://docs.info.apple.com/article.html?artnum=107454
    This is a complicated setup, not really a beginner's project, so it doesn't surprise me you couldn't figure out how to get this all to work even with the help of Apple tech support and Apple's Knowledgebase articles. My suggestion - use one of your Airport Express devices as a Base Station, and buy an Airport card for your iMac. That will be a lot easier to set up.

  • My sister's macbook cant connect to wifi. It said that "no airport card installed". What should we do?

      My sister's macbook cant connect to wifi. It said that "no airport card installed". What should we do?
    Help us to solve this problem.

    Depends on whether or not the machine is under warranty or not. If it is, just take it to an applestore and let them worry about it. If not, your airport card may have failed and may need to be replaced. It could also be that the card needs to be reseated, which is what I would check first. Look for a guide at ifixit.com.

  • Can't boot from install disk, and says no airport card installed, HELP!

    I bought a new Macbook Pro a few months ago, which recently had to go in for repair to have the screen changed. It came back with the new screen fitted but they had done a terrible job at aligning the lid, so it went back again. Came back and all looked good, until i booted up and realized that where my wifi icon is at the top of the screen, it wasn't connected. When clicking it to bring down the drop down menu of available wifi spots, all it said was "No Airport Card Installed"....Thinking a repair of disk permissions might be worth trying, I tried to boot from my OSX install disk holding down C, however when holding down C all it does is go on a constant loop of restarting, not even reaching the Apple logo. If I don't hold down C then it simply boots to the desktop, so i'm unable to access disk utility correctly to run a repair.
    Being pretty fedup with the whole situation, the laptop has now gone back for a 3rd time, as it never had these two issues before. I was just wondering if anyone had any idea what might have caused this? And how a status of no airport card installed and a drive that wont boot a disk normally can be related?
    I'll be getting it back on Tuesday, but i just wanted to know what the heck they might have done to have screwed things up.
    Thanks
    Phil
    Message was edited by: Philip Dexter

    Hi Phil,
    I can't say for sure, but it sounds to me like they didn't reconnect the WiFi hardware when replacing the screen. To my knowledge, the Airport "hardware" (including the antenna) is located inside the screen hinge. When the screen was replaced (and the hinge not properly aligned) perhaps someone improperly connected the Airport hardware, or forgot to connect it entirely.
    The reason the WiFi hardware is located in the hinge is because that is the only plastic area of the entire notebook. Radio signals do not travel well through aluminum, so some area of the computer has to be plastic to allow that signal to get through. The hinge is the only area where that's possible.
    As for the reason why the machine wouldn't boot up from the disc, I have no idea. Here's hoping it does when it comes back. If I were you, I'd have a chat with Apple Customer Relations about the situation.
    --Travis

  • Weird things happened and now No Airport Card Installed.

    Last night, I was playing with my iPhone 4 hotspot with my macbook unibody. Out of the blue, my macbook freeze while connecting with wireless hotspot. So what else can I do, I hard press the button and restart my macbook. Upon restart, it show NO AIRPORT CARD INSTALLED. So now I go and check my network preference, and I did not see airport listed on the left pane, I click + to add it, but no airport option. Weird... I regret with that iphone hotspot which now created problem with my macbook airport.
    Where did it gone?
    Is that hard press to shut down macbook disturbed every airport setting?
    Is there anyway to get this setting back without fresh install or even reinstall OS? I have tried everything like PRAM SMU thinggy, but none work. Now I checked the preferences folder i dont see airport plist anymore.
    This is so weird.. HELP!

    Pull down the Apple menu, select "About This Mac", then click on "More Info".  In the column on the left look for "Network" and within that, "AirPort".  Click on that.  If you see a lot of details about your AirPort card, then there's nothing wrong with your AirPort hardware.
    It might help to reset the connection settings on your Mac using these steps one at a time until the problem is resolved, recognizing that, depending on your problem, not all of these steps will make sense:
    1) Use the AirPort menu bar item to turn AirPort off, then on again.
    2) Try to select your Wi-Fi network from the AirPort menu.
    3) In the Network panel of System Preferences delete the AirPort item from the left column, then add it back.
    4) In the same panel as (3), define a new location and see if you can make that work.
    5) In the same panel, select the AirPort connection item, click the "Advanced" button, select the "TCP/IP" tab, then click "Renew DHCP Lease".  Note that the fix this step implements may be temporary.
    6) In the folder /Library/Preferences ( _not_ <yourhomefolder>/Library/Preferences), move the folder SystemConfiguration onto the Desktop, then restart your computer. See if you can now make your AirPort connection work.
    These steps may not help, but they'll only take a couple of minutes to try.  Before you try these, if you have any special network settings on your Mac for things like DSL credentials, note all your network settings, because the latter steps will destroy them.  If you got all the way to the last step, if things don't work any worse than before, you can trash the saved SystemConfiguration folder.

  • Why am I STILL getting "No AirPort card installed"?

    Guys, I am really struggling with my laptop. Here's what happened.
    My Macbook Pro 2009 13" was unexpectedly shutting down, freezing, etc. I took it into the Genius Bar and they ended up having to replace my hard drive bracket. Not terribly expensive, not a huge deal. When I got it home, it refused to acknowledge the AirPort card. It gave me "No AirPort card installed" and was not recognizing the hardware. I went back in, told them what happened, and they replaced the AirPort card (free of charge because I think someone there had messed it up since it had been fine before).
    All was well until I had an oopsie moment and it took a serious bump upside while open. The computer wouldn't recognize the AirPort card again so I brought it into the Genius Bar again (and yes, that would be the third time in about a week and a half). They did not charge me and said all they had to do was reseed the card. Wonderful. It worked fine for about a day, then it started acting funny, not recognizing the card, but when I restarted it, all was well. I left it shut and charging last night and when I opened it this morning, yet again, "No AirPort card installed".
    I've reset the PRAM and the SMC, I've restarted the computer multiple times, I've massaged the black hinge some... and now I'm researching USB Wifi adapters because I'm getting really fed up. Anyone have any idea why this keeps happening? Or any suggestions on what to do? The AirPort card is literally less than a month old. I can't go into the Genius Bar every few days to have them reseed my card, plus I'm sure they'd start to hate me.

    Welcome to Apple Support Communities
    If you are still having problems with your card and a new AirPort card doesn't solve anything, just ask for a new logic board. It will replace everything except the display, memory and hard drive, so this should work without any problem. If they refuse, insist because it looks like the only option in your case. Good luck

  • Wi-Fi gone: "No Airport Card Installed."

    Last night I watched Netflix just fine,  put my laptop to bed and this morning, no wif-fi connection!!. Blank airport icon reading "No Airport Card Installed."
    Recently installed new battery, not that that probably matters. Do you think my Airport Card died overnight? I have tried restarting twice and nothing. Other devices can connect to the wi-fi just fine. Any suggestions? Looks like this, below.... thank you tech-heads for any help you can give me. Staying tethered to the modem is a drag... especially since  I just forked over $130 for a new battery! I have a MBp-17 with OS 10.5.8, Mahalo from Kona Hawaii.

    Unfortunately this probably means that your MacBook's AirPort card has died. Last desperate effort at reviving it, try resetting the PRAM on the MacBook and if that does not change anything reset the System Management Controller.
    If none of those work, carry it in for service or call Apple at the appropriate phone number on this page to have them set up service.
    Best of luck.

  • Time Capsule lost connection, now my computer tells me there's no AirPort-card installed... HELP!

    This morning my Time Capsule blinked orange for a minute, then went back to green. In the meantime I couldn't see one single wifi network through my Airport, it just showed as no connection and no networks available (my husband also on this wireless network, had no problems though). I decided to restart my computer and after doing that my Airport told me there's no AirPort-card installed. I can't look for my Time Capsule now as it won't detect it of course, so through that there is no way of solving it. I did the disk First Aid as read somewhere that checking and resetting the authorities for writing (I'm sorry, really don't know the right term for this, in Dutch: Schrijfbevoegdheden) might help but that didn't do anything. I really don't know what to do, sure it's a software program but I'm a total nitwit with computers and don't want to start just doing things and messing it up even worse... Any help is much appreciated!!!

    Updating to 10.5.6 fixed the issue.

  • Get Message no airport card installed

    I transported my Macbook and when I set it up again it does not connect to the Internet and i get the message "No airport card installed".  Does this mean the airport card needs replacing?
    It also does not read a USB stick.

    It may be a physical problem with the card or it's connections but try a System Management Controller reset first. Instructions are here .

Maybe you are looking for

  • Trying to Import my iTunes Library Retrieved from a Crashed Mac on my New Mac

    Hi all, My old mac laptop crashed and I had the contents of it transferred to my new MacBookPro laptop. My itunes folder from the old mac laptop is now on my new laptop's desktop but I can't find a way to import my old itunes library to the new one.

  • ITunes 6.02 wont update iPod

    I downloaded 6.02 Yay! No, not really yay. Everytime i try to update my iPod Nano iTunes just shuts down. No reason just "You chose to end the non-responsive program iTunes. Send Error Report. Dont send." I didnt choose to end squat...whats wrong wit

  • Load-balancing with OCI connections

    Gurus, Oracle Identity Federation (OIF) can leverage an Oracle database as its transient data store in which case it uses JDBC-OCI connections to connect. However, there is no provision in OIF of defining multiple databases for load-balancing purpose

  • MenuBar submenu display

    when i go on a root menu element of a menubar, automatically i display a submenu element, if it exists. May I make a condition to decide to see the submenu or no. thanks

  • Enable "dynamic date calculation" variable type

    When saving reporting date/period in a report variant, we may use "dynamic date calculation" to specific date as selection parameter.  But the "Dynamic date calculation" is not visible in some ABAP reports - only "Table Variable from TVARVC"  type is