G4 MDD won't start up after new memory and DVD drive Install

After watching an online video demonstration on how to add RAM and install a new DVD drive in a G4, I decided it was something I could do myself. It all seemed to go well, but after I put it back together and plugged it back in, the light comes on when I press on the power button, but the computer won't start up.
I'm running 10.4.? and I just installed an extra 512 MB RAM and a Samsung DVD+R in the lower drive slot. I also looked at some other posts/threads and decided to reset the PMU button. -No change after that.
I'm trying to get this computer in working order to pass onto my mom when I visit her next week.
Any suggestions?

I have had some of the same problems that you have experienced. I have a dual 1.25 g PowerMac w/ 2 g of ram, the Superdrive, and 4 separate drives. My main boot drive was a 160 GB WD Caviar. I also had a 160 Maxtor and (2) 120 GB WD caviares (the 120s were raided for video. The 160 WD started giving me some problems so I decided to replace it with a 500 GB WD Caviar Blue. I installed it in the machine and initialized it. I left the jumper on the drive in the cable select position. I tried to backup using Carbon Cloner and kept getting and error on one file. I re-initialed the drive to make sure it was wiped clean. I then started to back up the old drive file by file. I kept getting messages saying the drive was full. THat wasn't true as there wasn't anything on it. After several attempts to move files, I decided to put the machine back together without the new drive.
Now the real fun begins. I had trouble with the machine booting. I zapped the PRAM and did everything I could think of to get it to boot. It wouldn't so I figured it was something I did. I let the machine sit for a day or two to give me some time to calm down. I read some articles in this support section as well as some articles on several sites I could find. The machine would not only not boot but it would not even beep. I opened the machine up and tried to clean out some of the dust in it. hen I removed the battery and let it sit for a few hours. Then I held the PMMU button on the motherboard in for a long 5 seconds. I put the battery back and waited an hour or so. I tried to start the machine and got nothing. It doesn't beep but the monitor lights up as it thinks the machine is on. I've all but given up on the machine.
Now I know this is long but I have another problem. I took out the 160 GB WD boot drive and used one of the external devices called an Ultradock v4 to connect the drive to my G4 Powerbook. I used Carbon Copy Cloner to back my 160 WD boot Drive to an external 750 gb Maxtor drive that is partitioned into 3 drives. I backed up the 160 WD Boot drive to it. I didn't pay attention to how much space was used on one of the partitions. I then backed up the Maxtor to the 500 gb WD Caviar Blue. The original WD 160 gb drive took up about 197 gb on the Maxtor which in turn took about the same space on the new WD 500 gb Caviar blue. I am at a loss as to why more space is taken up by backing up from a 160 gb drive to a roughly 225 gb partition when it was less than 160 used originally.
Any ideas?

Similar Messages

Iphone 6 won't start up after new update

iphone 6 won't start up after update, what can I do?

And it stops at that screen and that is all that shows? Then you need to try and force the device into Recovery Mode and restore. See the instructions in this support document. If you can't update or restore your iPhone, iPad, or iPod touch - Apple Support

P965 Platinium won't start up after CPU change and swap back - HELP Please

Hi all,
I have a P965 Platinium which has been working perfectly. I decided to try upgrading the CPU and put in an E5700 (socket 775 CPU) which I now realize is not supported. So I removed it again and re-installed the original CPU but now it won't boot - fans come on, HDD and DVD power up, but the Video goes into sleep mode.
Any thoughts ? This mobo doesn't appear to have any sound / beeper or at least, there's no beeps coming from anywhere.
Do I maybe need to clear some condition which was generated after the invalid CPU was tried ?

No joy :(
There is a beeper connected to the mobo and there isn't a sound out of it at all so I'm completely confused right now.
The CPU and Graphics Card fans are all firing up OK and the CPU gets hot confirming too that it's also getting power. I tried the modo with the CPU and no heatsink and the system shut itself down which was obviously to protect itself so again it seems to me that the syste is still alive. I also tried another graphics card but also no joy.

Power Mac G5 won't start even after Repairing Disk and Permissions

I Repaired the Disk first by booting from the install disk and it did repair 1 item and then tried to reboot into safe mode to repair permissions and it didn't boot. I restarted by booting from the install disk again and repaired permissions and it seemed to repair alot of stuff. But it still won't start up.
I get stuck at the blue screen with the apple logo above a status bar that never moves.

Hi Larry,
Appears to be time for An Archive & Install, which gives you a new OS, but can preserve all your files, pics, music, settings, etc., as long as you have plenty of free disk space...
http://docs.info.apple.com/article.html?artnum=107120

MacBook Pro won't start up after PRAM restart and a control/command restart

My iPhone 4 froze up and I tried to sync and restore the iPhone software. This made my iTunes prompt me to restart my Mac. Now it will not start up. It stops after the chime and grey screen comes on. I have tried a PRAM restart with no luck. Can anyone help?

So are you saying that it will not boot from the OSX installation disk?
It might be worth trying an SMC reset as described here:
http://support.apple.com/kb/HT1411?locale=en_GB

Applications won't start up after OS reinstall and software updates

I reinstalled my system software (archive). Immediately I needed to update. All updates occured successfully, but now my applications (including System Preferences) will not start up. When initiated, their icons jump up and down in the dock, but then nothing. Can anyone help?

Here are some troubleshooting steps for apps that crash on launch.
Normally, you should create a new User and test the apps in this new account if they work the problem is isolated to your User and not systemwide.
[Since you cannot perform this step due to not being able to launch System Preferences proceed to test your user.]
1. Navigate to ~(yourhome/library/fonts - drag this folder to the desktop.
• Restart and test your applications.
• If they work start adding the fonts back few at a time.
( Likely suspects are Times RO & Helvetica Fractions, also if you do not use Classic you can trash the classic fonts.)
2. Check Preferences Thoroughly;
• Navigate to ~(yourhome/library/preferences drag this folder to the desktop.
• Restart and test your applications.
• If this works, save the old preferences folder somewhere else or on disk, name it "old prefs" .
** Note: A very important file is the "com.apple.Mail.plist" preference file located in the Preferences folder which contains all email account settings and general mail preferences (hold this one and replace if your problem is not with Mail).
You'll have to go through some of your System Preferences and apps to set the preferences back to how you like them. (Or if you have the time and inclination, "cherry pick" through until you find the problem one or two.)
3. Check Permissions Inside Home Folder
   • Navigate to yourhome/library.
   • Get Info (Command - i) on folders for apps you are having problems with.
   • Open the "Ownership & permissions" disclosure triangle.
   • Make sure you are the owner, with "read and write" access.
• Click on "apply to all"
   • If this is correct, open the "Applications Support" folder and do the same procedure (Command+I) for the folders with the names of the applications you are having trouble with.
If these steps do not resolve the issues, then the problem is probably systemwide.
You may be able to repair this with the10.2.8 Stand Alone Combo Update
This is a full install, as opposed to an incremental "delta" update so it should overwrite any files that are damaged or missing. It does not matter if you have applied it before. It has worked well for many.
Good luck, let us know.
-mj
[email protected]

Non of my video links seem to work; bbcipalyer keeps on loading filmon goes black website news programs won't start, i downloaded puffin player and through that films and newssites work , youtube won't part etc etc. I have a ipad2

Non of my video links seem to work; bbcipalyer keeps on loading filmon goes black website news programs won't start, i downloaded puffin player and through that films and newssites work , youtube won't part etc etc. I have a ipad2

Non of my video links seem to work; bbcipalyer keeps on loading filmon goes black website news programs won't start, i downloaded puffin player and through that films and newssites work , youtube won't part etc etc. I have a ipad2

MacBook Pro won't start up after chime, MacBook Pro won't start up after chime

MacBook Pro won't start up after chime, MacBook Pro won't start up after chime

Try resetting the SMC.
Barry

My new iPad2 won't start up or shut down and I'm getting an error message OxE80000651

My iPad won't start up or shut down and I'm getting an error message when plugged into iTunes as OxE8000065!

Is it frozen on a certain screen? If yes, this happened to me when I tried updating the software on my iPad. (I have the iPad 1) All you have to do, is hold down the home button and sleep/wake button at the same time, for about 5 or so seconds. The iPad then should do a Factory Reset and turn on. After that, just connect the iPad to your computer and sync it to get all of your stuff back on it. I hope this helped! If not, could you give me any more info?

My C3 won't start up after get wet.

My C3 won't start up after get wet, i dries it and put it in uncooked rice for 24 hour, it still won't start up. When i charge it keep red light and wont start up. Can anyone help me? p/s:The phone still under warranty.

is correct, contact your local Xperi Care they might be able to tell you if they can repair the phone or the extend of the damage http://support.sonymobile.com/global-en/contactUs/

Acrobat Pro for Mac won't start, even after restarting the machine. Any suggestions?

Acrobat Pro for Mac won't start, even after restarting the machine. Any suggestions?

Hi Patrick,
Can you please mention the version of Adobe Acrobat that you are using and on what OS version. Also mention whether this problem has started recently and was running fine earlier or is it a fresh install and has never worked for you.
Have you tried uninstalling and reinstalling the product after you started facing this issue.
-Shashi

Lenovo G510 won't start when battery is on and it's fully charged

Hi there. I have my Lenovo g510 i5 notebook for 10 months, and my battery is wrong. I haven't used it on battery too much, but when I used it, I empty all of it and then charged it when it's turned down. Couple of days ago, the battery was empty I put it to charge, the orange light appears that it's charging, and day after when I put the battery on the notebook won't start, but with the battery and adapter start normally and show that the battery is 100% (fully charged). Why I can't use it on battery? Please help me.

Hi Kocevski_91,
Welcome to Lenovo Community!
As per the query we understood that you are facing issue with system not starting with battery in your G510 laptop.
Please remove the battery and connect only adapter and check for the issue, also try to perform a power drain by removing all the external devices connected to the devices and shutdown the system, now remove battery and adapter, press and hold the power button for 30 seconds, connect battery and adapter and check for the issue.
If still the issue persist, perform battery gauge reset, go to power manager select advance mode and select battery tab and click on battery maintenance under this option click perform under battery gauge option. Please perform and reply with results.
Hope this helps. Do post back if issue persists!
Best regards,
Ashwin.S
Did someone help you today? Press the star on the left to thank them with a Kudo!
If you find a post helpful and it answers your question, please mark it as an "Accepted Solution"! This will help the rest of the Community with similar issues identify the verified solution and benefit from it.
Follow @LenovoForums on Twitter!

Had CS4 on Power PC Mac (Non Intel) Now have new iMac and trying to install CS6 but won't accept serial number

Had CS4 on Power PC Mac (Non Intel) along with prior Photoshop versions. Now I have new iMac and trying to install CS6 but it won't accept my original serial number (Starts with PSW401, etc.).

I know what you are saying. I had purchased the CS5.5 upgrade, and a week later got the CS6 upgrade. I did this back in 2012. I had a old Mac Power PC which does not allow you to install CS5.5 or CS6 because it was not an intel processor. So even though I had the upgrades I never installed them. I waited until my old MAC died which it did this past weekend. And now that I have a new iMac I tried to install the new software. All of my past upgrades referenced my original Photoshop that was still resident on my old Mac. But since the install no longer has that reference because of the new computer, it will not accept any of my past serial numbers that it needs for the install.

After I installed the latest version of ITunes I get a message saying I'm missing the SQlite3.dll file. I have even unistalled the new version and then re-installed, still same message.

After I installed the latest version of ITunes I get a message saying I'm missing the SQlite3.dll file. I have even unistalled the new version and then re-installed, still same message.

With Windows Explorer, navigate to your C:\Program Files\Common Files\Apple\Apple Application Support folder.
Copy the SQLite3.dll that you should find there, navigate to the nearby Mobile Device Support folder, and Paste it in there also.
Restart the programme all should be well
In case that your OS is (64 bit)
1. Open windows explorer, go to location C:\Program Files (x86)\Common Files\Apple\Apple Application Support
2. Copy file "SQLite3.dll"
3. Now paste it in the folder C:\Program Files (x86)\Common Files\Apple\Mobile Device Support
4. Restart the programme, it should not display that message, it should be clear.
Good Luck

Starting February 1, new apps and app updates submitted to the App Store must be built with Xcode 5

Apple send out this message:
"Starting February 1, new apps and app updates submitted to the App Store must be built with Xcode 5 and iOS 7 SDK. Learn more about building apps for iOS 7."
A few questions about this to Adobe:
- Which AIR SDK version is prepared for this ?
- Do we need to recompile all ANE's ?
Cheers.

Hi All,
The issue has been fixed and the build 4.0.0.1619 is available at
http://labsdownload.adobe.com/pub/labs/flashruntimes/air/air4-0_sdk_mac.tbz2 for mac and http://labsdownload.adobe.com/pub/labs/flashruntimes/air/air4-0_sdk_win.zip for window. Please let us know if you will face any issues.
Regards,
Nimit

G4 MDD won't start up after new memory and DVD drive Install

Similar Messages

Maybe you are looking for