G4 Operating curiously slow

My G4 has recently started loading and just operating generally slow, especally in safari. The pinwheel icon will appear and stay up for several mins, i usually have to force quit and retry whatever I'm doing. I went into disk utility and checked for any volumes that needed to be repaired which it did, it repaired it but it's still being really slow. Anyone have any ideas or suggestions to what the problem could be or how to fix it?

Well that sounds like the problem is not that the hard drive is getting too full. And you've done the other obvious things.
I assume your RAM is OK and working.
Just on general principles, you might try running the AHT to see if anything shows up in the form of an error code.
You could also try applying pressure to the left palm rest and see if that makes a difference. If it does, you might be starting to get logic board problems, which can be fixed with either a shim or a reball if they are not too bad.
I did happen across another thread which may or may not be helpful--it is about Panther rather than Tiger, but I think many of the suggestions might be pertinent in your case.
http://discussions.apple.com/thread.jspa?messageID=6029098#6029098
You might look that over, and maybe some of the more experienced and knowledgeable members of the forum will step in and make some other suggestions.
Good luck!

Similar Messages

11g (11.2.0.1) - dimension operator very slow on incremental load

Dimension operator very slow in porcessing incremental loads on 11.2.0.1 Have applied cumulative patch - still same issue.
Statistics also gathered.
Initial load into empty dimension performs fine (thousands of records in < 1 min) - incremental load been running over 10 mins and still not loaded 165 records from staging table.
Any ideas?
Seen in 10.2.0.4 and applied patch which cured this issue.

Hi,
Thanks for the excellent suggestion.
Have run other mapings which maintain SCD type 2 using dimesnion operator behave similary to 10g. - have raised issue with this particular mapping with Oracle - awaiting response.
One question - when look at the mappings which maintain SCD Type 2s looks to join on dimension key and the surrogate ids.
What is best practice regarding indexing of such a dimension, e.g is it recommended to index dimension key and the surrogate ids along with the natural/nbusiness keys?
Thanks

IMac operating really slow

Hi, I have a G5 iMac, which for the last couple of weeks has been operating really slow. I've tried re-starting it, re-setting my Airport, in case it is internet related but it still keeps operating slowly. I get the spinning beach ball while it is thinking and then finally it functions, only to happen again. Occasionally, I get normal operating speed but then it happens again. I'm just going through a software update to see if there's anything I've missed out but is there anyone who is having the same problem, and is there anything anyone can recommend?

Not sure if this is related, Brett, but Apple have just released a new KB page detailing a problem which can occur when using some 3rd party VPN software under OSX 10.4.8:
Issue or symptom
After updating to Mac OS X 10.4.8, if some third-party VPN client software is installed, Activity Monitor may show the AirPort process taking 90% or more of the CPU time, and the computer may seem "slow".
Products affected
Mac OS X 10.4.8
Airport
Solution
Make sure your third-party VPN client software is up-to-date. Contact your network administrator or the manufacturer of your VPN client software.
This document will be updated as more information becomes available.
(from http://docs.info.apple.com/article.html?artnum=304798 )
Not sure if this applies to you, but worth considering.
Regardless, you might want to start up Activity Monitor (in your utility folder), open the "Activity Monitor" window, and then choose "active processes" to see if this, or some other software, is hogging your processor.
Cheers
Rod

Macbook Pro Is Operating Very Slow....

My Macbook Pro is 2 years old. I purchased it from New York . I live in India. Nowadays my macbook is operating too slow. Initial startup is very slow and also launching apps and other function are also working slow. I am little irritated with this,. I need a solution ASAP.

Launch the Console application in any of the following ways:
☞ Enter the first few letters of its name into a Spotlight search. Select it in the results (it should be at the top.)
☞ In the Finder, select Go ▹ Utilities from the menu bar, or press the key combination shift-command-U. The application is in the folder that opens.
☞ Open LaunchPad. Click Utilities, then Console in the icon grid.
The title of the Console window should be All Messages. If it isn't, select
SYSTEM LOG QUERIES ▹ All Messages
from the log list on the left. If you don't see that list, select
View ▹ Show Log List
from the menu bar at the top of the screen.Click the Clear Display icon in the toolbar. Then try the action that you're having trouble with again. Select any messages that appear in the Console window. Copy them to the Clipboard by pressing the key combination command-C. Paste into a reply to this message by pressing command-V.
The log contains a vast amount of information, almost all of which is irrelevant to solving any particular problem. When posting a log extract, be selective. A few dozen lines are almost always more than enough.
Please don't indiscriminately dump thousands of lines from the log into this discussion.
Please don't post screenshots of log messages—post the text.
Some private information, such as your name, may appear in the log. Anonymize before posting.

Operation very slow, Mini Server

Dear all,
my MAC Mini Server takes for each and every operation minutes instead of seconds and currently the updates will end with a failure (All updates could not be proceeded)
Any suggestion to this ?!
Thanks for all help,
Joshua

Volume corruptions and failing disk storage hardware can also cause slowness, but it's not clear what sort of errors you're encountering here.
If you're seeing hardware or I/O errors reported by the Disk Utility repair-volume mechanism, then I'd suggest getting an immediate backup of your (potentially failing?) disk, using Disk Utility, to an external storage device; to a USB disk or similar. Best to get a copy now, should this actually be a hardware failure in progress.
Some number of (correctable) file-protection errors from repair-permissions mechanism is unfortunately somewhat normal for an OS X or OS X Server system, and — if Disk Utility can resolve those ownership or protection settings online or possibly after a reboot and running Disk Utility via the recovery partition — are not usually a problem.
If you're not sure what you're looking at with those errors, then some more details on what was done within Disk Utility (permissions? volume verification?) and a few more details of the particular errors that were reported, would possibly be useful.

I get all this "interference" with the Yahoo bar. Why is that? It's a real nuisance and the whole FF operations seems slower. Why?

Often, 404 errors popup with the Yahoo application; usually, FF took me right to a website; that's not always the case now. Even when I try to log in to my e-mail account, the Yahoo notice comes up that the "page cannot be found." I continue hitting the menu location on my pull-down menu, but it may take four or five tries just to get my e-mail open. This DID NOT happen before and it's irritating. Also, the whole FF operation seems to have slowed down considerably.

Start Firefox in [[Safe Mode]] to check if one of the add-ons is causing the problem (switch to the DEFAULT theme: Tools > Add-ons > Themes).
* Don't make any changes on the Safe mode start window.
See:
* [[Troubleshooting extensions and themes]]

Certain 3D Operations Very Slow on 16 Bit Images

I haven't had Photoshop Extended before CS6, so I've been experimenting with doing some simple 3D stuff, such as turning text into 3D shapes and trying to match it to a photographic background.
What I'm doing seems quite simple, and it seems to be working, but there's one glitch: A few things seem to take a really long time. At worst, Photoshop goes completely unresponsive for about 40 seconds.
A good example is this: I have a photo I've opened in RGB/16 mode at 4096 x 6144 pixels, and I create a new Text layer over the photo with one word in it: STOP
I click the 3D button in the Options area for the Text Tool, and wait a full 40+ seconds before seeing the pop-up that asks whether I want to switch to the 3D workspace.
I assume a 40 second delay isn't normal. It's certainly not acceptable.
Once in the 3D editing realm, I can do most things with relative ease, such as moving the 3D mesh around, rotating it, changing lighting, etc. The update time for any of those operations to show is maybe 1/2 second or so to show on the screen. Some things are a little faster. Even rendering it into a pretty clean state is fairly quick - just 10 seconds or so.
I've tested this in both Photoshop CS6 32 bit and 64 bit, and the performance seems about the same, as does the appearance of the long delay.
Other observations:
I also see the long delay if I click on a history step to go back or forward in the history.
If I work on an 8 bits/channel image the 40 seconds is reduced to about 2 seconds.
I have a decent 8 core machine, with (by today's standards) a modest graphics card: ATI Radeon HD 5670 with 1 GB DDR5. I'm on the ATI Catalyst 12.2 drivers because the 12.4 (latest) set has other problems. But when I did try the 3D stuff with 12.4 the delay was the same.
Example: Going from this screen to the one below takes 40 seconds.
...40 seconds later...
Ultimately tweaking it to look decent seems doable - no crashes or glitches...
Not knowing what to expect, or what I should expect to not try to do, what I'm doing seems pretty simple. Am I trying something I shouldn't? Is it just a given that to do 3D one is supposed to work on 8 bits/channel data?
-Noel

Thanks Steve.
Wow, an honest 24 cores? Do you physically have 4 processors? I wasn't aware of any actual 12 core chips having become available yet.
That's the machine you use to determine if Photoshop delivers sufficiently fast performance, then?
Here's the additional information you requested:
> Can you zip up the results after 3D extrusion, as well?
I did this:
Opened the 3DTest.psd file.
Chose the T tool.
Pressed the 3D button in the options bar.
Noted in Task Manager that it looked like 1+ cores were busy (i.e., I was seeing 15% to 20% CPU usage overall).
After 40 seconds it asked if I want to switch to the 3D workspace. I chose No.
I then did File - Save As - 3DTestAfterExtrusion.psd, and the file written was 345 megabytes, which seems a bit large considering what's in it.
Then I realized I had left the Maximize PSD and PSB Compatibility setting at "Always".
In the History Panel I clicked on the Open step to undo everything.
I changed the Maximize Compatibility setting to Never.
I then clicked the 3D button again, and this time it did the extrusion and put up the 3D grid almost instantly.
Then I chose File - Save As, and chose the same file.
Photoshop then put up the "Photoshop has stopped working" dialog (i.e., it crashed). I chose "Debug", and this is what I saw:
Faulting application name: Photoshop.exe, version: 13.0.0.0, time stamp: 0x4f61c045
Faulting module name: atio6axx.dll, version: 6.14.10.11554, time stamp: 0x4f3b249f
Exception code: 0xc0000005
Fault offset: 0x0000000000b63bf1
Faulting process id: 0x1410
Faulting application start time: 0x01cd3540bcac5b5b
Faulting application path: C:\Program Files\Adobe\Adobe Photoshop CS6 (64 Bit)\Photoshop.exe
Faulting module path: C:\Windows\system32\atio6axx.dll
Report Id: 13b66384-a136-11e1-8538-005056c00008
Since the module is atio6axx.dll, it sure smells like an ATI display driver problem.
A zip file containing the result of the first save (with Maximize Compatiblity on) is here:
http://Noel.ProDigitalSoftware.com/temp/3DTestAfterExtrusion.zip
Since I have had newer ATI drivers installed, then uninstalled them and installed older ones, there is the distinct possibility that something is left over from a prior installation (i.e., something newer than 12.2 is mixed with 12.2) because of ATI uninstaller deficiencies. However, all the ati*.* fand amd*.* files I can find appear to have February dates.
More in the next post...
-Noel

Every DB operation is slows down due to RFC error

Hello!
Recently I have the following problem:
If I start any DB operation from DB13 (I have SAP ERP 6.0 with Oracle 10), the BGD WP gets the status: On Hold, Reason: RFC.
The log file dev_cp retrieves the following information after execution of DB Check:
Trace file of control program (trace level 3)
< Function: BtcTrcInit> Function: main SAPXPG 700
2007-10-23--14-42-27 : Before BtcXpgDetach
> Function: BtcXpgDetach < Function: BtcXpgDetach Accept RFC connection from R/3 system
2007-10-23--14-42-27 : Before RfcAccept
2007-10-23--14-42-27 : RfcAccept returned OK
security check switched OFF
Install RFC call SAPXPG_START_XPG
Install RFC call SAPXPG_START_XPG_LONG
Install RFC call SAPXPG_END_XPG
Wait for RFC call SAPXPG_START_XPG or SAPXPG_START_XPG_LONG
2007-10-23--14-42-27 : Before first call of RFCDispatch
> Function: BtcXpgStartXpgLong
2007-10-23--14-42-27 : Beginning of BtcXpgStartXpgLong
> Function: BtcXpgStartXpgImportLong > Function: BtcXpgParam < Function: BtcXpgParam > Function: BtcXpgParam
Line Text
<No StdOut/StdErr output reported>
<b>Target log table is not identical to source</b>
ItGetLine terminated with NULL
<Function: BtcXpgItTransfer > Function: BtcTrcReset < Function: BtcTrcReset Call mode: VIA RF
Input arguments of BtcXpgStartXpg:
Can some one help to solve this problem?
Thank you very much!
regards
Thom

Hi,
Are you using Office 365 or SharePoint Server 2013?
Please note, at present, for folders in SharePoint Online, there are some limitations:
1. Sharing a folder to external user by sending a guest link is not available.
2. There is no “Require sign-in” option when you try to share a folder.
3. We cannot follow a folder to track it.
For some reasons, we use fewer folders in SharePoint Online. For example:
• Not easy to change the display because of the linear folder structure.
• Risk in broken links upon document move or folder rename.
• Higher chance of running into threshold error.
If you are using Office 365, you can submit feedback to Office 365 Community, the current forum is more about "client" on Office 365 support.
Office 365 forums:
https://community.office365.com/en-us/f/default.aspx
Regards,
Melon Chen
TechNet Community Support

Floating point operations is slower when small values are used?

I have the following simple program that multiplies two different floating point numbers many times. As you can see, one of the numbers is very small. When I calculate the time of executing both multiplications, I was surprised that the little number takes much longer than the other one. It seems that working with small doubles is slower... Does anyone know what is happening?
public static void main(String[] args) throws Exception
        long iterations = 10000000;
        double result;
        double number = 0.1D;
        double numberA = Double.MIN_VALUE;
        double numberB = 0.0008D;
        long startTime, endTime,elapsedTime;
        //Multiply numberA
        startTime = System.currentTimeMillis();
        for(int i=0; i < iterations; i++)
            result = number * numberA;
        endTime = System.currentTimeMillis();
        elapsedTime = endTime - startTime;
        System.out.println("
        System.out.println("Number A)
Time elapsed: " + elapsedTime + " ms");
        //Multiply numberB
        startTime = System.currentTimeMillis();
        for(int i=0; i < iterations; i++)
            result = number * numberB;
        endTime = System.currentTimeMillis();
        elapsedTime = endTime - startTime;
        System.out.println("
        System.out.println("Number B)
Time elapsed: " + elapsedTime + " ms");
    } Result:
Number A) Time elapsed: 3546 ms
Number B) Time elapsed: 110 ms
Thanks,
Diego

Verrry interrresting... After a few tweaks (sum & print multiplication result to prevent Hotspot from removing the entire loop, move stuff to one method to avoid code alignment effects or such, loop to get Hotspot compile everything; code below),
I find that "java -server" gives the same times for both the small and the big value, whereas "java -Xint" and "java -client" exhibit the unsymmetry. So should I conclude that my CPU floating point unit treats both values the same, but the client/server compilers do something ...what?
(You may need to add or remove a zero in "iterations" so that you get sane times with -client and -server.)
public class t
    public static void main(String[] args)
     for (int n = 0; n < 10; n++) {
         doit(Double.MIN_VALUE);
         doit(0.0008D);
    static void doit(double x)
        long iterations = 100000000;
        double result = 0;
        double number = 0.1D;
        long start = System.currentTimeMillis();
        for (int i=0; i < iterations; i++)
            result += number * x;
        long end = System.currentTimeMillis();
        System.out.println("time for " + x + ": " + (end - start) + " ms, result " + result);
}

CS6 operating very slow and buggy

A year ago in August 2013 I purchased a new Mac 12 core three point something megahertz 12 gig RAM one gig video card.
I began running CS6 which I had been running for over year on my old computer no problems
after upgrading I believe to maverick, software is barely functional.
My wife still has on an old 2008 tower also running CS6 noticeed a slow down after maverick update. I
I have read through most of the forms it and still have not found an answer.
I'm having a problem with illustrator Photoshop and in design all of these programs take up to five minutes to open
create spinning balls and crash daily..the proble seems to get worse every day
Please help
Processor 2 x 3.06 GHz 6-Core Intel Xeon
Memory 12 GB 1333 MHz DDR3 ECC
Graphics ATI Radeon HD 5870 1024 MB

A year ago in August 2013 I purchased a new Mac 12 core three point something megahertz 12 gig RAM one gig video card.
I began running CS6 which I had been running for over year on my old computer no problems
after upgrading I believe to maverick, software is barely functional.
My wife still has on an old 2008 tower also running CS6 noticeed a slow down after maverick update. I
I have read through most of the forms it and still have not found an answer.
I'm having a problem with illustrator Photoshop and in design all of these programs take up to five minutes to open
create spinning balls and crash daily..the proble seems to get worse every day
Please help
Processor 2 x 3.06 GHz 6-Core Intel Xeon
Memory 12 GB 1333 MHz DDR3 ECC
Graphics ATI Radeon HD 5870 1024 MB

MACbook Pro Operating VERY slow

Let me first clarify, I have a mid 2010 Macbok Pro with a 2.53 GHz Intel Core i5 processor, 8 GB of 1067 MHz DDR3 Memory with a 500 GB Sata Disk Hard drive.
I have had speed issues since downloading OSX Mavericks and my problem keeps getting worse. Around the same time I upgraded to LR5 (lightroom 5). At first I though LR5 was the main culprit. I thought it was a memory hog (still think it is to an extint). So I started closing all other programs whille running LR5 (I did a force quite to make certain nothing else was running in the background). It seemed to make an improvement....for about an hour, then I started having speed issues again. Each time I went to load a new image, I would wait sometimes up to 30-60 seconds. I have played with several settings in LR and spent some time on forums reading about issues and trying to find fixes.
Then one day, while LR was clsoed (I have it open most of the time), I found I experienced several slow down issues onmany other programs. My mail, when I had multiple web browsers open, when ever I seemd to have more than 1 or 2 applications open and running. I thought maybe some of my RAM isn't working any longer. Not the issue according to what I can tell, it seems to be working. So over the last sevral days, I have tried multiple things:
I cleared up space on the Hard Drive. It was very low...down to 17 GB. It gets this way sometimes becasue I am a photographer, but I alwasy move last months images once I enter a new month, so this wasn't anything new. Still, I cleared up space. I now have almost 43 GB of free space. This seemed ot help for about 2 hours and then all the sudden speed issues again.
I installed Omni Disk Sweeper to see if it could find files I wasn't aware were still on my system. Thought maybe I can remove some of them to free up more space. I did find several images on some temp folder I wasn't aware of and I didn't need the images any longer, so I cleaned those up to help get the free space I have now. That also seemed to help fopr an hour or two and then more speed problems.
I then installed ClamXav based on a similar issue I read on the Apple forum. I started trying to run it on the entire user profile I have. Because that is a large area, that is taking exremely long. During trying to run it, on several occasions, my system bogs down (I had everyhting else closed) and it stops running for several minutes and tI ge the ebach ball as usual. Three times, it never seemd to unfreeze, so I had to power down to restart. During the first time I tried running it, it said it found an itm which may have been maleware called Mac Security. It was only an install package and I found nothing else installed or downloaded besides the install package. I don't recall installing anything with that title, but I vaugly recall seeing some add awhile back for it saying it could improve my speed issues. I downloaded the install package, but after reading about the software, I didn't download the package and thought I removed the insatll package as well. So I removed the install package and cleaned out the trash.
Since then, I have tried running the ClamXav again three diferent times and each time it freezes after severela hours and doesn't go any further. The only other thing it keeps finding are exlm files. As I understand, these are related to my Apple mail and are not an issue, so I ddi not deleter them.
Bottom line, is I am tired and fed up. I am by no means a computer expert on either hardware or software and konw just enough to cause myself more trouble. I don't have the cash right now to get my macbook serviced, so I am hoping I can find help here. Any suggesitons are certainly welcomed.
Thank You

Here’s your report with some comments:
Hardware Information:
          MacBook Pro (17-inch, Mid 2010)
          MacBook Pro - model: MacBookPro6,1
          1 2.53 GHz Intel Core i5 CPU: 2 cores
          8 GB RAM
Video Information:
          Intel HD Graphics - VRAM: 288 MB
          NVIDIA GeForce GT 330M - VRAM: 512 MB
Audio Plug-ins:
          BluetoothAudioPlugIn: Version: 1.0 - SDK 10.9
          AirPlay: Version: 1.9 - SDK 10.9
          AppleAVBAudio: Version: 2.0.0 - SDK 10.9
          iSightAudio: Version: 7.7.3 - SDK 10.9
Startup Items:
        ProTec6: Path: /Library/StartupItems/ProTec6
          ProTec6b: Path: /Library/StartupItems/ProTec6b These two are antipiracy software that show up frequently in misbehaving macs in these discussions. There are two versions, 6 and 6b. One of them is bad, having two is worse. Options:
remove the 6 version from /Library/StartupItems, restart, test your mac's performance.
remove both versions, retest
see if there's an updated version on the developer's website that will work better
use alternative software that doesn't require you to put bad antipiracy software on your mac that slows it down.
System Software:
          OS X 10.9.1 (13B42) - Uptime: 3 days 20:1:58
Disk Information:
          TOSHIBA MK5055GSXF disk0 : (500.11 GB)
                    EFI (disk0s1) <not mounted>: 209.7 MB
                    disk0s2 (disk0s2) <not mounted>: 499.25 GB
                    Recovery HD (disk0s3) <not mounted>: 650 MB
          HL-DT-ST DVDRW GS23N
USB Information:
          Apple Inc. Built-in iSight
          Apple Computer, Inc. IR Receiver
          Apple Inc. Apple Internal Keyboard / Trackpad
          Apple Inc. BRCM2070 Hub
                    Apple Inc. Bluetooth USB Host Controller
FireWire Information:
Thunderbolt Information:
The next categories are loaded at startup and are potential causes for poor performance, as they run all the time, in the background. I've marked the more suspicious ones in red. I'd address those first.
Kernel Extensions:
         com.Cycling74.driver.Soundflower          (1.5.2)   There was just a post yesterday about this one, which is also a frequent flyer on the misbehaving bad driver list. I’d get rid of it. It’s probably in /Library/Extensions or /System/Library/Extensions. I'd remove it, restart your mac, retest your performance. You can run etrecheck again to make sure it's gone.
Problem System Launch Daemons:
Problem System Launch Agents:
Launch Daemons:
          [loaded] com.adobe.fpsaud.plist
          [loaded] com.adobe.SwitchBoard.plist
        [loaded] com.google.keystone.daemon.plist    This can be a problem. It is spyware from Google that can slow things down.
        [failed] com.splashtop.streamer.SRServiceDaemon.plist Failed means that is was too incompatible to load. Should be removed.
The way this works with the Daemons and Agents is that you should try to remove the entire app that is responsible for the daemon or agent. This can involve some detective work. These are .plist files, and if you just try to remove the .plist file itself it probably won't work, because of two reasons:
when the app runs again, it will just generate the .plist file again
Mavericks caches .plist files more than before, and nobody seems to know exactly how to get rid of them from the cache yet. I've asked on this forum and no answers so far.
So the thing to do is uninstall the app that puts the daemon or agent there. The way to do this is:
figure out what the app is that is responsible for that daemon. A browser search for that daemon may help.
then use the uninstaller provided by the developer to remove all of the app. Unfortunately, one of the hallmarks of crapware is there is usually no uninstaller. So in that case, another web search, e.g., "uninstall xxx" , where xxx is the name of the app, may be helpful.
Launch Agents:
          [not loaded] com.adobe.AAM.Updater-1.0.plist
        [loaded] com.google.keystone.agent.plist see comment above re: keystone
          [failed] com.splashtop.streamer.SRServiceAgent.plist
          [loaded] com.wacom.wacomtablet.plist
User Launch Agents:
          [loaded] com.adobe.AAM.Updater-1.0.plist
        [failed] com.apple.CSConfigDotMacCert-[redacted]@me.com-SharedServices.Agent.plist
          [failed] com.apple.SafariBookmarksSyncer.plist
          [loaded] com.memeo.Memeod.plist
          [loaded] com.nds.pcshow.plist
          [loaded] com.nds.pcshow.uninstall.plist
          [not loaded] jp.co.canon.Inkjet_Extended_Survey_Agent.plist   Printer manufacturer utilities are generally a bad idea and should not be installed.
User Login Items:
          Mosaic
          iTunesHelper
          Zinio Alert Messenger
          GoFlex Home Agent
          GrowlMenu
          GrowlHelperApp
3rd Party Preference Panes:
          Flash Player
          Growl
          WacomTablet
Internet Plug-ins:: if your browser is misbehaving then one of these may be the problem. I'd update Java.
         JavaAppletPlugin: Version: 14.9.0 - SDK 10.7 Outdated! Update
          FlashPlayer-10.6: Version: 11.9.900.170 - SDK 10.6
          EPPEX Plugin: Version: 10.0
          LogitechHarmony: Version: 1.2.0.2 - SDK 10.7
          Flash Player: Version: 11.9.900.170 - SDK 10.6
          Default Browser: Version: 537 - SDK 10.9
          QuickTime Plugin: Version: 7.7.3
          WacomNetscape: Version: 1.1.1-1
          Silverlight: Version: 5.1.20913.0 - SDK 10.6
          iPhotoPhotocast: Version: 7.0 - SDK 10.8
User Internet Plug-ins::
          Google Earth Web Plug-in: Version: 7.1
Bad Fonts:
          None
Old applications: I'm not exactly sure of the implications of "Old applications" here, but I'd make sure everything is up-to-date and compatible with Mavericks, especially if the app is misbehaving.
          AU Lab:          Version: 2.2.1 - SDK 10.0
                    /Developer/Applications/Audio/AU Lab.app
          Accessibility Verifier:          Version: 1.3 - SDK 10.0
                    /Developer/Applications/Utilities/Accessibility Tools/Accessibility Verifier.app
          Bluetooth Diagnostics Utility:          Version: 2.5 - SDK 10.0
                    /Developer/Applications/Utilities/Bluetooth/Bluetooth Diagnostics Utility.app
          Bluetooth Explorer:          Version: 2.5 - SDK 10.0
                    /Developer/Applications/Utilities/Bluetooth/Bluetooth Explorer.app
          Clipboard Viewer:          Version: 3.0 - SDK 10.0
                    /Developer/Applications/Utilities/Clipboard Viewer.app
          Core Image Fun House:          Version: 2.1.46 - SDK 10.0
                    /Developer/Applications/Graphics Tools/Core Image Fun House.app
          Crash Reporter:          Version: 1.0 - SDK 10.5
                    /Library/Application Support/Aperture/Plug-Ins/Google/Silver Efex Pro 2/Silver Efex Pro 2.ApertureEdit/Contents/Frameworks/Breakpad.framework/Versions/A/Resources/cras h_report_sender.app
          Crash Reporter:          Version: 1.0 - SDK 10.5
                    /Library/Application Support/Aperture/Plug-Ins/Google/Silver Efex Pro 2/Silver Efex Pro 2.ApertureEdit/Contents/Frameworks/Breakpad.framework/Resources/crash_report_se nder.app
          Crash Reporter:          Version: 1.0 - SDK 10.5
                    /Library/Application Support/Aperture/Plug-Ins/Google/HDR Efex Pro 2/HDR Efex Pro 2.ApertureEdit/Contents/Frameworks/Breakpad.framework/Versions/A/Resources/cras h_report_sender.app
          Crash Reporter:          Version: 1.0 - SDK 10.5
                    /Library/Application Support/Aperture/Plug-Ins/Google/HDR Efex Pro 2/HDR Efex Pro 2.ApertureEdit/Contents/Frameworks/Breakpad.framework/Resources/crash_report_se nder.app
          Crash Reporter:          Version: 1.0 - SDK 10.5
                    /Library/Application Support/Aperture/Plug-Ins/Google/Color Efex Pro 4/Color Efex Pro 4.ApertureEdit/Contents/Frameworks/Breakpad.framework/Versions/A/Resources/cras h_report_sender.app
          Crash Reporter:          Version: 1.0 - SDK 10.5
                    /Library/Application Support/Aperture/Plug-Ins/Google/Color Efex Pro 4/Color Efex Pro 4.ApertureEdit/Contents/Frameworks/Breakpad.framework/Resources/crash_report_se nder.app
          Crash Reporter:          Version: 1.0 - SDK 10.5
                    /Library/Application Support/Aperture/Plug-Ins/Google/Analog Efex Pro/Analog Efex Pro.ApertureEdit/Contents/Frameworks/Breakpad.framework/Versions/A/Resources/cr ash_report_sender.app
          Crash Reporter:          Version: 1.0 - SDK 10.5
                    /Library/Application Support/Aperture/Plug-Ins/Google/Analog Efex Pro/Analog Efex Pro.ApertureEdit/Contents/Frameworks/Breakpad.framework/Resources/crash_report_ sender.app
          CrashReporterPrefs:          Version: 10.7 - SDK 10.0
                    /Developer/Applications/Utilities/CrashReporterPrefs.app
          Dashcode:          Version: 3.0.2 - SDK 10.0
                    /Developer/Applications/Dashcode.app
          FileMerge:          Version: 2.5 - SDK 10.0
                    /Developer/Applications/Utilities/FileMerge.app
          HALLab:          Version: 1.6 - SDK 10.0
                    /Developer/Applications/Audio/HALLab.app
          Help Indexer:          Version: 4.1 - SDK 10.0
                    /Developer/Applications/Utilities/Help Indexer.app
          IORegistryExplorer:          Version: 2.1 - SDK 10.0
                    /Developer/Applications/Utilities/IORegistryExplorer.app
          Keynote:          Version: 5.3 - SDK 10.5
                    /Applications/iWork '09/Keynote.app
          OpenGL ES Performance Detective:          Version: 1.0 - SDK 10.0
                    /Developer/Applications/Graphics Tools/OpenGL ES Performance Detective.app
          PackageMaker:          Version: 3.0.5 - SDK 10.0
                    /Developer/Applications/Utilities/PackageMaker.app
          PacketLogger:          Version: 2.5 - SDK 10.0
                    /Developer/Applications/Utilities/Bluetooth/PacketLogger.app
          Pages:          Version: 4.3 - SDK 10.5
                    /Applications/iWork '09/Pages.app
          Pixie:          Version: 2.5 - SDK 10.0
                    /Developer/Applications/Graphics Tools/Pixie.app
          Quartz Composer Visualizer:          Version: 1.3 - SDK 10.0
                    /Developer/Applications/Graphics Tools/Quartz Composer Visualizer.app
          Quartz Debug:          Version: 4.2 - SDK 10.0
                    /Developer/Applications/Performance Tools/Quartz Debug.app
          Repeat After Me:          Version: 1.4.10 - SDK 10.0
                    /Developer/Applications/Utilities/Speech/Repeat After Me.app
          SLLauncher:          Version: 1.0 - SDK 10.5
                    /Library/Application Support/Microsoft/Silverlight/OutOfBrowser/SLLauncher.app
          SRLanguageModeler:          Version: 1.9 - SDK 10.0
                    /Developer/Applications/Utilities/Speech/SRLanguageModeler.app
          SleepX:          Version: 3.1.1 - SDK 10.0
                    /Developer/Applications/Utilities/SleepX.app
          Spin Control:          Version: 0.9.1 - SDK 10.0
                    /Developer/Applications/Performance Tools/Spin Control.app
          USB Prober:          Version: 4.4.0 - SDK 10.0
                    /Developer/Applications/Utilities/USB Prober.app
          dynamiclinkmanager:          Version: 6.0.0 - SDK 10.5
                    /Library/Application Support/Adobe/Common/dynamiclink/CS6/dynamiclinkmanager.app
          dynamiclinkmediaserver:          Version: 6.0.0 - SDK 10.5
                    /Library/Application Support/Adobe/Common/dynamiclinkmediaserver/1.0/dynamiclinkmediaserver.app
Time Machine:
          Skip System Files: NO
          Mobile backups: OFF
          Auto backup: NO
          Volumes being backed up:
          Destinations:
                    GoFlex Home Backup [Network] (Last used)
                    Total size: 0 B
                    Total number of backups: (null)
                    Size of backup disk: Excellent
                              Backup size 0 B > (Disk size 0 B X 3)
          Time Machine details may not be accurate.
          All volumes being backed up may not be listed.
Top Processes by CPU:
               2%          WindowServer
               1%          EtreCheck
               0%          coreservicesd
               0%          SystemUIServer
               0%          notifyd
Top Processes by Memory:
          500 MB          com.apple.WebKit.WebContent
          197 MB          Safari
          188 MB          Finder
          123 MB          mds_stores
          82 MB          WindowServer
Virtual Memory Statistics:
          1.34 GB          Free RAM
          3.03 GB          Active RAM
          2.10 GB          Inactive RAM
          1.12 GB          Wired RAM
          9.57 GB          Page-ins
         577 MB          Page-outs   This reflects the slow symptoms you are having. It means that memory tasks are filling up your RAM and being "paged-out" to virtual memory, i.e., your hard drive, which is way slower than your RAM.
Depending on your level of experience you may not be comfortable digging around in your Mac's system files to remove all these various bits of software. In that case, try removing just the soundflower and protec, as those are more discrete and should be easier to remove. Then restart your mac and rerun etrecheck and see how your performance is.

Database operations are slow on motorazr

Hi guys,
Database operation like setRecord and addRecord takes too much time in motorzr. Sometimes it take time in minutes which makes application unusable.
Is it the problem with the motorazr only because i haven't encountered this problem in any other phone.
why does setRecord take more time then addRecord?
Please help.

hi Sm,
Check this below note for backup using brdb6brt
326691 - DB6: 'BACKUP' & 'REDIRECTED RESTORE' of a DB2 UDB EEE DB
in DB13 there is an option -> Archive inactive log files to Device. Use this to backup into a disk
you can mount the USB dirve as a drive or a file system and take the backup to this location by specifying them while taking the backup.
You may also check this link for DB2 backup and restore
http://www.devx.com/gethelpon/10MinuteSolution/18039/0/page/1
Regards,
chandru

Keynote file menu and file operations very slow

Anyone else seeing specific slow downs when you open, save, etc or access the file menu on the new version of keynote 5.1 using 10.6.8.
Any fixes?

I will try to make a WebDAV repository out of one on Monday.
I just tried something different though. I logged on as a user with administrator rights, it only took 13 seconds to list the directory instead of 3 minutes plus. The regular user has rights and eventually sees what they should, it is just painfully slow.

Pages is operating very SLOW

why so slow???
eg. typing, selecting.. etc
anyone else have this problem?
is it just my RAM?
I have relaunched pages several times..

No, my machine is only a few months old and I haven't messed with it at all.
Everything in my document is pretty much all standard stuff also. I don't see why there would be any problems.
My situation is exactly as described by the first respondent. Slow when typing/selecting in tables that have Object Placement as 'Inline'.. which is a pretty standard set-up that I'm sure many people have. But speed is fine if table is 'Floating' or when I am typing outside the table.
Specifically:
- My document is portrait orientation
- Includes some Greek characters(α, β, γ, etc.), some arrows and a .tiff image as well as superscripted and subscripted text
- Fonts are standard
but I don't see why any of this should have any effect as the program should easily be able to handle this.

Time capsule disk operations very slow

Hello,
My time capsule became very slow since a few days.
File transfert from any computer s(Mac and PC) on the network to the tme capsule is now extremely slow. Does not matter if I user Ethernet or Airport.
No configuration change have been made neither network change.
Thanks in advance for any help.

-To sum up things: The setting "DHCP + NAT" delivers fast copying speeds
Yes. You will eliminate the backroute to the fiber modem or maybe even back to your ISP - depending on their setup.
The standard setting of the router is "DHCP + NAT" right?
Normally the standard setting is good enough to obtain an internet connection instantly (without filling in IP, DNS etc. manually).
Yes, you shoudl not have to fill in those details. Should work straight away as your MBP gets thos edetails automatically (yes?)
best to reset the Airport Extreme to defaults and connect it again using DHCP / NAT

G4 Operating curiously slow

Similar Messages

Maybe you are looking for