G4 pci
can't get new motherboard to recognize mac os 9, won't start from cd or external hard drive , starts up fine in 10.3.9
Okay, here's what i did, wiped the old hard drive clean, that didn't help. Disconnected all power for about a day, no electric no pram battery nothing.
put in the same power mac G4 disc and it worked! Re-installed all mac os 9's went right on to 10.3 no problems. It just had to clear it's feeble little mind I guess.
Similar Messages
-
New system, MSI X800XT PCI-E Issues
Hi there!
I just bought a new motherboard, new ram, new cpu and new videocard and was eagerly wanting to set this stuff up.
My system is now as follows:
Motherboard: MSI 925X Neo-54G
CPU: P4 3.40Ghz (1 Mb L2 Cache) (Socket 775)
RAM: 1 GByte DDR2 533
Video Card: MSI RX800 XT-VTD256 (ATI Radeon X800XT PCI-E)
I put everything up and working and installed Windows XP w/ SP2. Installed every driver needed from the motherboard CD, went to ATI's site and downloaded the latest Catalyst Drivers, etc.
After having everything apparently working as it should, I downloaded 3dMark 2005 to see how it went. I had never used the 2005 version before so I wasn't too shocked to see it only got like 3200 points although I was kinda suspicious after seeing some of the tests going at like 1 fps.
I went back to another PC I have at home (a socket 478, P4 3.0Ghz, Asus P4C800 mobo, 1 GByte DDR400 Ram and a GeForce 6800 Ultra). Ran 3dMark 2005 and to my amazement, it got like 4400 points.
Well, double checked everything on the catalyst control panel (nothing really useful there)... then went back to the BIOS setup to investigate what is not working as it should. MSI boards have that nifty Dynamic Overclocking thing and so I turned it on. My BIOS settings are now as following (only listing settings I have doubts on):
DDR2 533 (Dual Channel Mode Enabled)
DRAM Timing Selectable: By SPD
Memory Hole: Disabled
PCI Express Root Port Func: Auto on all 4 ports
PCI-E Compliance Mode: v1.0a
DRAM Data integrity mode: Non-ECC
PCI IDE Busmaster: Enabled (I have a 250GB 8MB SATA HD,fyi)
Init Display First: PCI-E
Maximum Payload Size (PCI-E): 4096
High performance mode: Optimized (Manual is the other option)
Dynamic Overclocking: 5% (0-15% range)
Adjust DDR Frequency: Auto
Auto Detect PCI Clock: Enabled
Spread Spectrum: Disabled
CPU Clock: 200Mhz
CPU Voltage: By CPU default
Memory Voltage: 1.8v
AGP/PCI-E Voltage: 1.5v
Ok, so, can anyone tell me what is wrong (if anything)? I mean, I think this PC should be faster than my other one...
I'm not really interested in overclocking and I am really convinced this hardware should be able to beat my other one easily with default operating status.
Also, I tested this PC's performance with Rome: Total War and it is just as 3dMark had showed, it performs worse than the other pc I mentioned, with the same exact settings.
Any help please?
Regards!Quote
Originally posted by thegrommit
I'm not familiar with Intel motherboards, but posting your DirectX results might help someone who is work out whether you have all the right drivers installed:
Ok, here goes:
System Information
Time of this report: 10/3/2004, 15:48:43
Machine name: PC2
Operating System: Windows XP Professional (5.1, Build 2600) Service Pack 2 (2600.xpsp_sp2_rtm.040803-2158)
Language: English (Regional Setting: Portuguese)
System Manufacturer: INTELR
System Model: AWRDACPI
BIOS: Phoenix - AwardBIOS v6.00PG
Processor: Intel(R) Pentium(R) 4 CPU 3.40GHz (2 CPUs)
Memory: 1024MB RAM
Page File: 138MB used, 2323MB available
Windows Dir: C:\WINDOWS
DirectX Version: DirectX 9.0c (4.09.0000.0904)
DX Setup Parameters: Not found
DxDiag Version: 5.03.2600.2180 32bit Unicode
DxDiag Notes
DirectX Files Tab: No problems found.
Display Tab 1: No problems found.
Sound Tab 1: No problems found.
Music Tab: No problems found.
Input Tab: No problems found.
Network Tab: No problems found.
DirectX Debug Levels
Direct3D: 0/4 (n/a)
DirectDraw: 0/4 (retail)
DirectInput: 0/5 (n/a)
DirectMusic: 0/5 (n/a)
DirectPlay: 0/9 (retail)
DirectSound: 0/5 (retail)
DirectShow: 0/6 (retail)
Display Devices
Card name: RADEON X800 XT
Manufacturer: ATI Technologies Inc.
Chip type: RADEON X800 XT (0x5D57)
DAC type: Internal DAC(400MHz)
Device Key: Enum\PCI\VEN_1002&DEV_5D57&SUBSYS_03121002&REV_00
Display Memory: 256.0 MB
Current Mode: 1280 x 1024 (32 bit) (85Hz)
Monitor: Plug and Play Monitor
Monitor Max Res: 1600,1200
Driver Name: ati2dvag.dll
Driver Version: 6.14.0010.6476 (English)
DDI Version: 9 (or higher)
Driver Attributes: Final Retail
Driver Date/Size: 8/25/2004 13:29:04, 209408 bytes
WHQL Logo'd: Yes
WHQL Date Stamp: n/a
VDD: n/a
Mini VDD: ati2mtag.sys
Mini VDD Date: 8/25/2004 13:28:46, 787456 bytes
Device Identifier: {D7B71EE2-1E17-11CF-FE6A-1823A1C2CB35}
Vendor ID: 0x1002
Device ID: 0x5D57
SubSys ID: 0x03121002
Revision ID: 0x0000
Revision ID: 0x0000
Video Accel: ModeMPEG2_C ModeMPEG2_D
Deinterlace Caps: {6E8329FF-B642-418B-BCF0-BCB6591E255F}: Format(In/Out)=(YUY2,YUY2) Frames(Prev/Fwd/Back)=(0,0,1) Caps=VideoProcess_YUV2RGB VideoProcess_StretchX VideoProcess_StretchY DeinterlaceTech_PixelAdaptive
{335AA36E-7884-43A4-9C91-7F87FAF3E37E}: Format(In/Out)=(YUY2,YUY2) Frames(Prev/Fwd/Back)=(0,0,0) Caps=VideoProcess_YUV2RGB VideoProcess_StretchX VideoProcess_StretchY DeinterlaceTech_BOBVerticalStretch
{552C0DAD-CCBC-420B-83C8-74943CF9F1A6}: Format(In/Out)=(NV12,0x3231564e) Frames(Prev/Fwd/Back)=(0,0,2) Caps=VideoProcess_YUV2RGB VideoProcess_StretchX VideoProcess_StretchY DeinterlaceTech_PixelAdaptive
{6E8329FF-B642-418B-BCF0-BCB6591E255F}: Format(In/Out)=(NV12,0x3231564e) Frames(Prev/Fwd/Back)=(0,0,1) Caps=VideoProcess_YUV2RGB VideoProcess_StretchX VideoProcess_StretchY DeinterlaceTech_PixelAdaptive
{335AA36E-7884-43A4-9C91-7F87FAF3E37E}: Format(In/Out)=(NV12,0x3231564e) Frames(Prev/Fwd/Back)=(0,0,0) Caps=VideoProcess_YUV2RGB VideoProcess_StretchX VideoProcess_StretchY DeinterlaceTech_BOBVerticalStretch
Registry: OK
DDraw Status: Enabled
D3D Status: Enabled
AGP Status: Enabled
DDraw Test Result: Not run
D3D7 Test Result: Not run
D3D8 Test Result: Not run
D3D9 Test Result: Not run
Sound Devices
Description: SB Audigy Audio [D000]
Default Sound Playback: Yes
Default Voice Playback: Yes
Hardware ID: PCI\VEN_1102&DEV_0004&SUBSYS_00531102&REV_03
Manufacturer ID: 1
Product ID: 100
Type: WDM
Driver Name: e10kx2k.sys
Driver Version: 5.12.0001.0136 (English)
Driver Attributes: Final Retail
WHQL Logo'd: Yes
Date and Size: 11/5/2001 13:02:30, 1758336 bytes
Other Files:
Driver Provider: Creative
HW Accel Level: Full
Cap Flags: 0xF5F
Min/Max Sample Rate: 4000, 191999
Static/Strm HW Mix Bufs: 32, 31
Static/Strm HW 3D Bufs: 32, 31
HW Memory: 0
Voice Management: Yes
EAX(tm) 2.0 Listen/Src: Yes, Yes
I3DL2(tm) Listen/Src: No, No
Sensaura(tm) ZoomFX(tm): No
Registry: OK
Sound Test Result: Not run
Sound Capture Devices
Description: SB Audigy Audio [D000]
Default Sound Capture: Yes
Default Voice Capture: Yes
Driver Name: e10kx2k.sys
Driver Version: 5.12.0001.0136 (English)
Driver Attributes: Final Retail
Date and Size: 11/5/2001 13:02:30, 1758336 bytes
Cap Flags: 0x41
Format Flags: 0xFFF
DirectMusic
DLS Path: C:\WINDOWS\SYSTEM32\drivers\GM.DLS
DLS Version: 1.00.0016.0002
Acceleration: Enabled
Ports: SB Audigy DirectMusic Synthesizer [D000], Hardware (Kernel Mode), Output, DLS, Internal, Default Port
SB Audigy Audio [D000], Software (Kernel Mode), Output, DLS, Internal
Microsoft MIDI Mapper [Emulated], Hardware (Not Kernel Mode), Output, No DLS, Internal
SB Audigy Synth A [D000] [Emulated], Hardware (Not Kernel Mode), Output, No DLS, Internal
SB Audigy Sw Synth [D000] [Emulated], Hardware (Not Kernel Mode), Output, No DLS, Internal
SB Audigy Synth B [D000] [Emulated], Hardware (Not Kernel Mode), Output, No DLS, Internal
SB Audigy MIDI Port [D000] [Emulated], Hardware (Not Kernel Mode), Output, No DLS, External
Microsoft GS Wavetable SW Synth [Emulated], Hardware (Not Kernel Mode), Output, No DLS, Internal
SB Audigy MIDI Port [D000] [Emulated], Hardware (Not Kernel Mode), Input, No DLS, External
Microsoft Synthesizer, Software (Not Kernel Mode), Output, DLS, Internal
Registry: OK
Test Result: Not run
DirectPlay Service Providers
DirectPlay8 Modem Service Provider - Registry: OK, File: dpnet.dll (5.03.2600.2180)
DirectPlay8 Serial Service Provider - Registry: OK, File: dpnet.dll (5.03.2600.2180)
DirectPlay8 IPX Service Provider - Registry: OK, File: dpnet.dll (5.03.2600.2180)
DirectPlay8 TCP/IP Service Provider - Registry: OK, File: dpnet.dll (5.03.2600.2180)
Internet TCP/IP Connection For DirectPlay - Registry: OK, File: dpwsockx.dll (5.03.2600.2180)
IPX Connection For DirectPlay - Registry: OK, File: dpwsockx.dll (5.03.2600.2180)
Modem Connection For DirectPlay - Registry: OK, File: dpmodemx.dll (5.03.2600.2180)
Serial Connection For DirectPlay - Registry: OK, File: dpmodemx.dll (5.03.2600.2180)
DirectPlay Voice Wizard Tests: Full Duplex: Not run, Half Duplex: Not run, Mic: Not run
DirectPlay Test Result: Not run
Registry: OK
DirectPlay Adapters
DirectPlay8 Serial Service Provider: COM1
DirectPlay8 TCP/IP Service Provider: Local Area Connection - IPv4 -
DirectPlay Voice Codecs
Voxware VR12 1.4kbit/s
Voxware SC06 6.4kbit/s
Voxware SC03 3.2kbit/s
MS-PCM 64 kbit/s
MS-ADPCM 32.8 kbit/s
Microsoft GSM 6.10 13 kbit/s
TrueSpeech(TM) 8.6 kbit/s
DirectPlay Lobbyable Apps
Disk & DVD/CD-ROM Drives
Drive: C:
Free Space: 190.3 GB
Total Space: 239.4 GB
File System: NTFS
Model: Maxtor 7Y250M0
Drive: E:
Free Space: 42.0 GB
Total Space: 117.8 GB
File System: FAT32
Model: IC35L120AVV207-0
Drive: F:
Free Space: 28.9 GB
Total Space: 76.3 GB
File System: NTFS
Model: ST380011A
Drive: D:
Model: CREATIVE DVD-ROM DVD6240E
Driver: c:\windows\system32\drivers\cdrom.sys, 5.01.2600.2180 (Portuguese), 8/4/2004 06:59:54, 49536 bytes
Drive: G:
Model: AXV CD/DVD-ROM SCSI CdRom Device
Driver: c:\windows\system32\drivers\cdrom.sys, 5.01.2600.2180 (Portuguese), 8/4/2004 06:59:54, 49536 bytes
System Devices
Name: Intel(R) 82801FB/FBM Ultra ATA Storage Controllers - 266F
Device ID: PCI\VEN_8086&DEV_266F&SUBSYS_70531462&REV_03\3&2411E6FE&0&F9
Driver: C:\WINDOWS\system32\DRIVERS\pciide.sys, 5.01.2600.0000 (English), 8/17/2001 13:51:52, 3328 bytes
Driver: C:\WINDOWS\system32\DRIVERS\pciidex.sys, 5.01.2600.2180 (Portuguese), 8/3/2004 22:59:42, 25088 bytes
Driver: C:\WINDOWS\system32\DRIVERS\atapi.sys, 5.01.2600.2180 (English), 8/3/2004 22:59:44, 95360 bytes
Name: Intel(R) 82801FB/FBM SMBus Controller - 266A
Device ID: PCI\VEN_8086&DEV_266A&SUBSYS_70531462&REV_03\3&2411E6FE&0&FB
Driver: n/a
Name: PCI Device
Device ID: PCI\VEN_8086&DEV_2668&SUBSYS_26688086&REV_03\3&2411E6FE&0&D8
Driver: n/a
Name: Intel(R) 82801FB/FBM PCI Express Root Port - 2660
Device ID: PCI\VEN_8086&DEV_2660&SUBSYS_00000000&REV_03\3&2411E6FE&0&E0
Driver: C:\WINDOWS\system32\DRIVERS\pci.sys, 5.01.2600.2180 (English), 8/3/2004 23:07:48, 68224 bytes
Name: Intel(R) 82801FB/FBM USB2 Enhanced Host Controller - 265C
Device ID: PCI\VEN_8086&DEV_265C&SUBSYS_70531462&REV_03\3&2411E6FE&0&EF
Driver: C:\WINDOWS\system32\drivers\usbehci.sys, 5.01.2600.2180 (English), 8/3/2004 23:08:38, 26624 bytes
Driver: C:\WINDOWS\system32\drivers\usbport.sys, 5.01.2600.2180 (English), 8/3/2004 23:08:44, 142976 bytes
Driver: C:\WINDOWS\system32\usbui.dll, 5.01.2600.2180 (English), 8/4/2004 00:56:48, 74240 bytes
Driver: C:\WINDOWS\system32\drivers\usbhub.sys, 5.01.2600.2180 (English), 8/3/2004 23:08:44, 57600 bytes
Driver: C:\WINDOWS\system32\hccoin.dll, 5.01.2600.2180 (English), 8/4/2004 08:56:44, 7168 bytes
Name: Intel(R) 82801FB/FBM USB Universal Host Controller - 265B
Device ID: PCI\VEN_8086&DEV_265B&SUBSYS_70531462&REV_03\3&2411E6FE&0&EB
Driver: C:\WINDOWS\system32\drivers\usbuhci.sys, 5.01.2600.2180 (English), 8/3/2004 23:08:38, 20480 bytes
Driver: C:\WINDOWS\system32\drivers\usbport.sys, 5.01.2600.2180 (English), 8/3/2004 23:08:44, 142976 bytes
Driver: C:\WINDOWS\system32\usbui.dll, 5.01.2600.2180 (English), 8/4/2004 00:56:48, 74240 bytes
Driver: C:\WINDOWS\system32\drivers\usbhub.sys, 5.01.2600.2180 (English), 8/3/2004 23:08:44, 57600 bytes
Name: Intel(R) 82801FB/FBM USB Universal Host Controller - 265A
Device ID: PCI\VEN_8086&DEV_265A&SUBSYS_70531462&REV_03\3&2411E6FE&0&EA
Driver: C:\WINDOWS\system32\drivers\usbuhci.sys, 5.01.2600.2180 (English), 8/3/2004 23:08:38, 20480 bytes
Driver: C:\WINDOWS\system32\drivers\usbport.sys, 5.01.2600.2180 (English), 8/3/2004 23:08:44, 142976 bytes
Driver: C:\WINDOWS\system32\usbui.dll, 5.01.2600.2180 (English), 8/4/2004 00:56:48, 74240 bytes
Driver: C:\WINDOWS\system32\drivers\usbhub.sys, 5.01.2600.2180 (English), 8/3/2004 23:08:44, 57600 bytes
Name: Intel(R) 82801FB/FBM USB Universal Host Controller - 2659
Device ID: PCI\VEN_8086&DEV_2659&SUBSYS_70531462&REV_03\3&2411E6FE&0&E9
Driver: C:\WINDOWS\system32\drivers\usbuhci.sys, 5.01.2600.2180 (English), 8/3/2004 23:08:38, 20480 bytes
Driver: C:\WINDOWS\system32\drivers\usbport.sys, 5.01.2600.2180 (English), 8/3/2004 23:08:44, 142976 bytes
Driver: C:\WINDOWS\system32\usbui.dll, 5.01.2600.2180 (English), 8/4/2004 00:56:48, 74240 bytes
Driver: C:\WINDOWS\system32\drivers\usbhub.sys, 5.01.2600.2180 (English), 8/3/2004 23:08:44, 57600 bytes
Name: Intel(R) 82801FB/FBM USB Universal Host Controller - 2658
Device ID: PCI\VEN_8086&DEV_2658&SUBSYS_70531462&REV_03\3&2411E6FE&0&E8
Driver: C:\WINDOWS\system32\drivers\usbuhci.sys, 5.01.2600.2180 (English), 8/3/2004 23:08:38, 20480 bytes
Driver: C:\WINDOWS\system32\drivers\usbport.sys, 5.01.2600.2180 (English), 8/3/2004 23:08:44, 142976 bytes
Driver: C:\WINDOWS\system32\usbui.dll, 5.01.2600.2180 (English), 8/4/2004 00:56:48, 74240 bytes
Driver: C:\WINDOWS\system32\drivers\usbhub.sys, 5.01.2600.2180 (English), 8/3/2004 23:08:44, 57600 bytes
Name: Intel(R) 82801FB Ultra ATA Storage Controllers - 2652
Device ID: PCI\VEN_8086&DEV_2652&SUBSYS_70531462&REV_03\3&2411E6FE&0&FA
Driver: C:\WINDOWS\system32\DRIVERS\pciide.sys, 5.01.2600.0000 (English), 8/17/2001 13:51:52, 3328 bytes
Driver: C:\WINDOWS\system32\DRIVERS\pciidex.sys, 5.01.2600.2180 (Portuguese), 8/3/2004 22:59:42, 25088 bytes
Driver: C:\WINDOWS\system32\DRIVERS\atapi.sys, 5.01.2600.2180 (English), 8/3/2004 22:59:44, 95360 bytes
Name: Intel(R) 82801FB LPC Interface Controller - 2640
Device ID: PCI\VEN_8086&DEV_2640&SUBSYS_00000000&REV_03\3&2411E6FE&0&F8
Driver: C:\WINDOWS\system32\DRIVERS\isapnp.sys, 5.01.2600.0000 (English), 8/17/2001 13:58:02, 35840 bytes
Name: Intel(R) 925X PCI Express Root Port - 2585
Device ID: PCI\VEN_8086&DEV_2585&SUBSYS_00000000&REV_04\3&2411E6FE&0&08
Driver: C:\WINDOWS\system32\DRIVERS\pci.sys, 5.01.2600.2180 (English), 8/3/2004 23:07:48, 68224 bytes
Name: Intel(R) 925X Memory Controller Hub - 2584
Device ID: PCI\VEN_8086&DEV_2584&SUBSYS_00000000&REV_04\3&2411E6FE&0&00
Driver: n/a
Name: Intel(R) 82801 PCI Bridge - 244E
Device ID: PCI\VEN_8086&DEV_244E&SUBSYS_00000000&REV_D3\3&2411E6FE&0&F0
Driver: C:\WINDOWS\system32\DRIVERS\pci.sys, 5.01.2600.2180 (English), 8/3/2004 23:07:48, 68224 bytes
Name: Intel(R) PRO/100 VE Network Connection
Device ID: PCI\VEN_8086&DEV_1064&SUBSYS_053C1462&REV_03\4&10355354&0&40F0
Driver: C:\WINDOWS\system32\DRIVERS\e100b325.sys, 7.01.0012.0000 (Portuguese), 2/10/2004 07:49:14, 154112 bytes
Driver: C:\WINDOWS\system32\Prounstl.exe, 7.00.0006.0000 (English), 11/21/2003 07:26:42, 118784 bytes
Driver: C:\WINDOWS\system32\e100b325.din, 6/26/2002 22:53:38, 5110 bytes
Driver: C:\WINDOWS\system32\IntelNic.dll, 2.05.0001.0000 (English), 7/27/2003 22:55:40, 24064 bytes
Driver: C:\WINDOWS\system32\e100bmsg.dll, 2/18/2004 09:40:00, 12288 bytes
Name: Broadcom NetXtreme Gigabit Ethernet
Device ID: PCI\VEN_14E4&DEV_1677&SUBSYS_053C1462&REV_01\4&F39E1D8&0&00E0
Driver: n/a
Name: Standard Dual Channel PCI IDE Controller
Device ID: PCI\VEN_1106&DEV_3164&SUBSYS_31641106&REV_06\4&10355354&0&20F0
Driver: C:\WINDOWS\system32\DRIVERS\pciidex.sys, 5.01.2600.2180 (Portuguese), 8/3/2004 22:59:42, 25088 bytes
Driver: C:\WINDOWS\system32\DRIVERS\atapi.sys, 5.01.2600.2180 (English), 8/3/2004 22:59:44, 95360 bytes
Driver: C:\WINDOWS\system32\DRIVERS\pciide.sys, 5.01.2600.0000 (English), 8/17/2001 13:51:52, 3328 bytes
Name: Creative Game Port
Device ID: PCI\VEN_1102&DEV_7003&SUBSYS_00401102&REV_03\4&10355354&0&01F0
Driver: C:\WINDOWS\system32\drivers\gameenum.sys, 5.01.2600.2180 (English), 8/3/2004 23:08:22, 10624 bytes
Name: OHCI Compliant IEEE 1394 Host Controller
Device ID: PCI\VEN_1102&DEV_4001&SUBSYS_00101102&REV_00\4&10355354&0&02F0
Driver: C:\WINDOWS\system32\DRIVERS\ohci1394.sys, 5.01.2600.2180 (English), 8/4/2004 07:10:10, 61056 bytes
Driver: C:\WINDOWS\system32\DRIVERS\1394bus.sys, 5.01.2600.2180 (English), 8/4/2004 07:10:08, 53248 bytes
Driver: C:\WINDOWS\system32\DRIVERS\nic1394.sys, 5.01.2600.2180 (English), 8/4/2004 09:05:44, 61824 bytes
Driver: C:\WINDOWS\system32\DRIVERS\arp1394.sys, 5.01.2600.2180 (English), 8/4/2004 09:05:44, 60800 bytes
Driver: C:\WINDOWS\system32\DRIVERS\enum1394.sys, 5.01.2600.0000 (English), 8/17/2001 14:46:40, 6400 bytes
Name: Creative SB Audigy
Device ID: PCI\VEN_1102&DEV_0004&SUBSYS_00531102&REV_03\4&10355354&0&00F0
Driver: C:\WINDOWS\system32\ksuser.dll, 5.03.2600.2180 (Portuguese), 8/4/2004 00:56:44, 4096 bytes
Driver: C:\WINDOWS\system32\ksproxy.ax, 5.03.2600.2180 (Portuguese), 8/4/2004 00:56:58, 130048 bytes
Driver: C:\WINDOWS\system32\drivers\ks.sys, 5.03.2600.2180 (Portuguese), 8/3/2004 23:15:22, 140928 bytes
Driver: C:\WINDOWS\system32\drivers\drmk.sys, 5.01.2600.2180 (English), 8/3/2004 23:08:00, 60288 bytes
Driver: C:\WINDOWS\system32\drivers\portcls.sys, 5.01.2600.2180 (English), 8/3/2004 23:15:50, 145792 bytes
Driver: C:\WINDOWS\system32\drivers\stream.sys, 5.03.2600.2180 (Portuguese), 8/3/2004 23:08:04, 48640 bytes
Driver: C:\WINDOWS\system32\wdmaud.drv, 5.01.2600.2180 (English), 8/4/2004 00:56:58, 23552 bytes
Driver: C:\WINDOWS\system32\drivers\e10kx2k.sys, 5.12.0001.0136 (English), 11/5/2001 13:02:30, 1758336 bytes
Driver: C:\WINDOWS\system32\drivers\ctoss2k.sys, 5.12.0001.0131 (English), 9/11/2001 13:10:14, 186944 bytes
Driver: C:\WINDOWS\system32\ctdlang.dat, 9/11/2001 13:36:02, 161900 bytes
Driver: C:\WINDOWS\system32\ctstatic.dat, 9/11/2001 13:27:44, 144493 bytes
Driver: C:\WINDOWS\system32\ctdaught.dat, 9/11/2001 13:24:48, 44055 bytes
Driver: C:\WINDOWS\system32\default.ecw, 9/23/1999 00:18:50, 2259067 bytes
Driver: C:\WINDOWS\system32\sfman32.dll, 5.12.0001.0130 (English), 8/17/2001 15:35:44, 36864 bytes
Driver: C:\WINDOWS\system32\a3d.dll, 80.00.0000.0003 (English), 9/11/2001 13:05:52, 49152 bytes
Driver: C:\WINDOWS\system32\ctbas2w.dat, 9/11/2001 13:35:58, 111123 bytes
Driver: C:\WINDOWS\system32\SBAudigy.ico, 8/17/2001 13:42:28, 7406 bytes
Driver: C:\WINDOWS\system32\AUDIGYICON.bmp, 8/17/2001 13:42:08, 1912 bytes
Name: RADEON X800 XT Secondary
Device ID: PCI\VEN_1002&DEV_5D77&SUBSYS_03131002&REV_00\4&2B4A1FD5&0&0108
Driver: C:\WINDOWS\system32\DRIVERS\ati2mtag.sys, 6.14.0010.6476 (Portuguese), 8/25/2004 13:28:46, 787456 bytes
Driver: C:\WINDOWS\system32\ati2dvag.dll, 6.14.0010.6476 (English), 8/25/2004 13:29:04, 209408 bytes
Driver: C:\WINDOWS\system32\ati2cqag.dll, 6.14.0010.0252 (English), 8/25/2004 13:10:20, 237568 bytes
Driver: C:\WINDOWS\system32\Ati2mdxx.exe, 6.14.0010.2494 (English), 8/25/2004 13:27:08, 65536 bytes
Driver: C:\WINDOWS\system32\ati3duag.dll, 6.14.0010.0257 (English), 8/25/2004 13:25:56, 2239328 bytes
Driver: C:\WINDOWS\system32\ativvaxx.dll, 6.14.0001.0029 (English), 8/25/2004 13:15:16, 476928 bytes
Driver: C:\WINDOWS\system32\ATIDDC.DLL, 6.14.0010.0005 (English), 8/25/2004 13:26:32, 81920 bytes
Driver: C:\WINDOWS\system32\atitvo32.dll, 6.14.0010.4100 (English), 8/25/2004 13:12:10, 17408 bytes
Driver: C:\WINDOWS\system32\ativcoxx.dll, 6.13.0010.0005 (English), 11/9/2001 11:01:04, 24064 bytes
Driver: C:\WINDOWS\system32\ati2evxx.exe, 6.14.0010.4105 (English), 8/25/2004 13:26:56, 389120 bytes
Driver: C:\WINDOWS\system32\ati2evxx.dll, 6.14.0010.4105 (English), 8/25/2004 13:27:00, 86016 bytes
Driver: C:\WINDOWS\system32\atipdlxx.dll, 6.14.0010.2491 (English), 8/25/2004 13:27:18, 126976 bytes
Driver: C:\WINDOWS\system32\Oemdspif.dll, 6.14.0001.0010 (English), 8/25/2004 13:27:12, 102400 bytes
Driver: C:\WINDOWS\system32\ati2edxx.dll, 6.14.0010.2494 (English), 8/25/2004 13:27:04, 30720 bytes
Driver: C:\WINDOWS\system32\ATIDEMGR.dll, 1.00.1698.24059 (Portuguese), 8/25/2004 14:22:08, 151552 bytes
Driver: C:\WINDOWS\system32\atioglxx.dll, 6.14.0010.4582 (English), 8/25/2004 13:48:12, 6508544 bytes
Driver: C:\WINDOWS\system32\atiiiexx.dll, 6.14.0010.4003 (English), 8/25/2004 14:40:02, 294912 bytes
Name: RADEON X800 XT
Device ID: PCI\VEN_1002&DEV_5D57&SUBSYS_03121002&REV_00\4&2B4A1FD5&0&0008
Driver: C:\WINDOWS\system32\DRIVERS\ati2mtag.sys, 6.14.0010.6476 (Portuguese), 8/25/2004 13:28:46, 787456 bytes
Driver: C:\WINDOWS\system32\ati2dvag.dll, 6.14.0010.6476 (English), 8/25/2004 13:29:04, 209408 bytes
Driver: C:\WINDOWS\system32\ati2cqag.dll, 6.14.0010.0252 (English), 8/25/2004 13:10:20, 237568 bytes
Driver: C:\WINDOWS\system32\Ati2mdxx.exe, 6.14.0010.2494 (English), 8/25/2004 13:27:08, 65536 bytes
Driver: C:\WINDOWS\system32\ati3duag.dll, 6.14.0010.0257 (English), 8/25/2004 13:25:56, 2239328 bytes
Driver: C:\WINDOWS\system32\ativvaxx.dll, 6.14.0001.0029 (English), 8/25/2004 13:15:16, 476928 bytes
Driver: C:\WINDOWS\system32\ATIDDC.DLL, 6.14.0010.0005 (English), 8/25/2004 13:26:32, 81920 bytes
Driver: C:\WINDOWS\system32\atitvo32.dll, 6.14.0010.4100 (English), 8/25/2004 13:12:10, 17408 bytes
Driver: C:\WINDOWS\system32\ativcoxx.dll, 6.13.0010.0005 (English), 11/9/2001 11:01:04, 24064 bytes
Driver: C:\WINDOWS\system32\ati2evxx.exe, 6.14.0010.4105 (English), 8/25/2004 13:26:56, 389120 bytes
Driver: C:\WINDOWS\system32\ati2evxx.dll, 6.14.0010.4105 (English), 8/25/2004 13:27:00, 86016 bytes
Driver: C:\WINDOWS\system32\atipdlxx.dll, 6.14.0010.2491 (English), 8/25/2004 13:27:18, 126976 bytes
Driver: C:\WINDOWS\system32\Oemdspif.dll, 6.14.0001.0010 (English), 8/25/2004 13:27:12, 102400 bytes
Driver: C:\WINDOWS\system32\ati2edxx.dll, 6.14.0010.2494 (English), 8/25/2004 13:27:04, 30720 bytes
Driver: C:\WINDOWS\system32\ATIDEMGR.dll, 1.00.1698.24059 (Portuguese), 8/25/2004 14:22:08, 151552 bytes
Driver: C:\WINDOWS\system32\atioglxx.dll, 6.14.0010.4582 (English), 8/25/2004 13:48:12, 6508544 bytes
Driver: C:\WINDOWS\system32\atiiiexx.dll, 6.14.0010.4003 (English), 8/25/2004 14:40:02, 294912 bytes
Name: SOJU SCSI Controller
Device ID: PCI\SOJU341\0000
Driver: n/a
Hope anyone can help me out -
Greetings NI folks,
I'm an oceanographer, and have an sidescan sonar data aquasition computer running Windows XP SP2, and NiDAQ 7.0 (Legacy). For several years, this machine has worked flawlessly, but today, I booted it up to test the system for an upcoming job, and I got some strange errors in our sonar program. I tranced the problem to our NI-6533 PCI-DIO-32HS card. I launched NI Automation Explorer to test that the card was responsive, and when I click the "test panel", I get an error: "The device is not responding to the first IRQ level." Continue (yes/no). If I click yes, I can test the digital i/o's, but nothing happens, and all the tests fail (nonresponsive). I tried moving the card to another PCI slot, tried forcing it to have a specific IRQ that was unused by anything else, and finally tried moving it to another computer that had never been used with the DIO card. I'm still getting the error, and the card is nonresponsive. I'm at the limit of my abilities, and would like to know if there's anything else I can do, or should we send the card back to NI for repair/diagnosis.
Thanks.Duplicate Post
Best Regards
Hani R.
Applications Engineer
National Instruments -
Z97 GAMING 9 AC - PCIE and the wi-fi module no longer detecting
Hi,
I 'm Overclocking enthusiast and recently decided to take to my hometown in Brazil using a platform products from MSI, to make disclosure of benchmark tests in social networks and in gaming blogs.
So i purchased a new system including the MSI Z97 GAMING 9 AC motherboard and MSI Gaming N770 TF 4GD5/OC GeForce GTX 770 4GB graphics card. After building the system I initially had problems with the graphics card not being detected and the wi-fi module (that hard to fit in the mobo) don't even appear in device manager. I already tried to dismount and remount the module on the motherboard with extreme care, no success. After some research I updated the bios to 1.5 and used the onboard graphics card to install windows 8.1, drivers etc. After windows, drivers etc were installed the graphics card and the wi-fi module still would not detect.
I have tried another graphics card in this system and it does not seem to work either. In bios it just always says that the PCIE slots are 'empty'.
So I have tried the following:
1. Cleared CMOS.
2. Updated BIOS.
3. Updated Chipset, drivers etc.
4. Tested the Graphics Card in other computers.
5. Used a different graphics card in this system.
6. Tried PCIE 2.0, 3.0 and auto.
7. Completely reformated and started from scratch.
So after many attempts I am disappointed with MSI and need some solution to my problem, since I saw that several customers who have purchased from MSI are the same product with exactly the same problem which possibly conclude that MSI has a duty to resolve these cases.
Full Specs:
• EVGA SuperNOVA 1300G2 ATX12V/EPS12V 1300W 80Plus Gold Power Supply 120-G2-1300-XR
• Corsair Cooling Hydro Series H100i Liquid CPU Cooler - Extreme Performance CPU Cooling and Built-In
• Intel Core i7 4790 LGA1150 CPU 3.6Ghz
• Corsair Vengeance Pro 16GB 2x8GB DDR3
• 2 x Kingston 120GB SSD 6Gbs
• Microsoft Windows 8.1 Pro 64bit OEM
• MSI Z97 Gaming 9 AC Motherboard
• MSI Gaming N770 TF 4GD5/OC GeForce GTX 770 4GB 256-Bit GDDR5 PCI Express 3.0 HDCP Ready SLI Support Video CardI have the exact same problem with my gaming 9 AC only the PCIe slot for gfx card worked initially. MSI support sent me a new WiFi adapter, it also didnt work. When I installed it, the PCIe slot would not identify my graphics card anymore. MSI support then advised me to return the board to the reseller, where it is now - they are checking it for defects before they do anything.
Ill keep you updated how they proceed from here. If there are any more problems I will just ask my reseller to downgrade me to a gaming 7, I can add a pcie wifi card on my own, and avoid the hassle. -
Z97 GAMING 9 AC - PCIE no longer detecting
Hi,
So I recently purchased a new system including the MSI Z97 GAMING 9 AC motherboard and MSI R9 280X GAMING G3 graphics card. After building the system I initially had problems with the graphics card not being detected. After some research I updated the bios to 1.4 and used the onboard graphics card to install windows 8.1, drivers etc. After windows, drivers etc were installed the graphics card still would not detect until I went into the bios and changed the PCIE to 2.0 (instead of auto). This then used the 280x instead of onboard and allowed me to install the graphics card drivers. I switched the PCIE to 3.0 after it was working.
Initially everything was working but the next morning I had the same issue again: only the onboard graphics card was being used. I switched back to PCIE 2.0 and it worked again. Until the next morning: the 280x is no longer being detected at all in any PCIE slots or in PCIE auto, 2.0 or 3.0. I have ruled out a graphics card issue as the 280x works in other pcs. I have tried another graphics card in this system and it does not seem to work either. In bios it just always says that the PCIE slots are 'empty'.
So I have tried the following:
1. Cleared CMOS.
2. Updated BIOS.
3. Updated Chipset, drivers etc.
4. Tested the Graphics Card in other computers.
5. Used a different graphics card in this system.
6. Tried PCIE 2.0, 3.0 and auto.
7. Completely reformated and started from scratch.
Any suggestions as to why the PCIE slots seem to have stopped detecting?
Full Specs:
Corsair AX860i ATX Power Supply,80 PLUSPlatinum Full Modular
Corsair Cooling Hydro Series H100i Liquid CPU Cooler - Extreme Performance CPU Cooling and Built-In
Intel Core i7 4770K LGA1150 CPU 3.5Ghz 8Mb Cache Haswell
Corsair 16GB (2x8GB) DDR3 CMY16GX3M2A1600C9R 1600MHz Dimm, Unbuffered, 9-9-9-24, Vengeance Pro Red H
Samsung 250GB SSD 840 EVO SATA III 6Gbs 2.5 7mm 540MB/s/520MB/s
Microsoft Windows 8.1 Pro 64bit OEM
MSI Z97 Gaming 9 AC Motherboard
MSI Radeon R9 280X Gaming 3GBWas this issue ever solved as im seeing the same issue.
When I first booted the machine all was well however when I came to reboot my machine for the first time it no longer sees I have a GPU and so switched to the Intel onboard 4600.
At first I assumed the GPU had come lose or some BIOS setting needed changing. BIOS is set to use PEG (PCI-E Graphics card device) so i reseated the card and rebooted. This didn't work.
I reset the BIOS CMOS and that fixed the issue, my machine booted using the graphics card again however as soon I rebooted windows again it lost the card switching back to the onboard.
According to the BIOS the PCI-E slot is empty. I swapped the card out for an older ATI 7870 but had the same problem. PCI-E slot is empty unless I clear the CMOS (I made no changes in the BIOS).
At this point it sounds like some kind of software issue I have updated my BIOS to the latest version (1.5) but that hasn't fixed the issue. Whenever I shutdown or restart it will lose sight of my card unless I clear the CMOS or power down at the wall.
SPEC:
Intel 4790k
Nvidia 970 GTX
MSI Z97i Gaming AC mini-itx
8GB 1866mhz Kingston
Corsair 600w PSU -
Dv6265us connexant PCI sound card + windows 7 = Not working
So I'm here becuase I can't find a driver on my own. I've scoured the internet for hours, finding very little to help with my issue. So here goes...
I have an HP Pavilion dv6000 (Dv6265us), and ever since I installed window 7, Windows cannot figure out what drivers to install for the PCI sound card. The best I've found so far says this:
"Windows found driver software for your device but encountered an error while attempting to install it"
"Microsoft UAA Bus Driver for High Definition Audio"
"If you know the manufacturer of your device, you can visit its website and check the support section for driver software."
Now here's the funky part...everywhere I've found information on my laptop, it says I have a Conexant PCI sound card. If I'm wrong I would love for someone to tell me; better yet, a link to a download to actually be able to use the PCI sound card. Right now the card is under other devices and is listed as "PCI Device".
Now the Link I've provided from the conexant site will tell you this under PC Audio Support - Windows® 7,
"Conexant develops audio solutions that are used in a wide range of products including personal computers. We provide customized audio drivers to our customers, which include major computer manufacturers globally. At the request of these manufacturers, Conexant does not provide end-user support or drivers for PC audio products. If you have an issue with the audio configuration in Windows 7, please contact the manufacturer of your computer.
I tried calling HP support, but they wouldn't even answer my yes or no question... "Do you have audio drivers for my laptop that will allow me to hear sound?" Instead of saying yes or no, I was told that I needed to pay fifty to one-hundred dollars;....fifty dollars for a one time fee of telephone service, or one-hundred for the year. I even went as far as asking..."if you can't fix my problem, do I get a refund?" I was told no...so here I am. I've had problems before with hp...but this is rediculous, and whats worse is from the way things look, Connexant was told NOT to support their own product, or provide drivers for windows 7 by their customer(HP). I realize everyone is hurting for money, but **bleep**, this is a new low...To answer your question, there are no windows 7 drivers for that model notebook. The notebook was designed for Windows 2000, Windows xp and windows vista.
This is one of the issues with upgrading the OS on a computer before checking the specs of the hardware.
I do understand the frustration but it would be more beneficial to revert back to the original OS that the notebook came with. That is what the HP support desk will have you do to prove functionality of the notebook should you have paid for the Diagnostic Support.
Although I am an HP employee, I am speaking for myself and not for HP. Clicking the "Kudos star" to the left is a great way to say thanks!
When your problem has been solved, accept the solution by clicking the "Accept as Solution" button to help other members in the future! -
PCIE 3.0 test with MSI Z68A-GD80 G3 :)
The Z68A-GD80 G3 is MSI’s first motherboard with PCIE 3.0 connectivity. Currently there are no PCIE 3 devices available yet but later on we can test its performance by using a PCIE SSD. Aside from this, the board has also a new UEFI Bios named “Click Bios II” which for me is way better than the previous version.
Before we take a closer look on the board, let’s check out the package first.
Box design is a bit the same as the GD80 B3 version before. Once you open it up, all main features of the said board are enumerated
Extreme Power Design, Military Class II Components (SFC, Hi-C Caps, Multi Bios), 3 PCIEx16 Slots, Super Charger and OC Genie II
For the bundled accessories, you have the same old story – Manual, Software Disc, four SATA cables, two Molex to SATA power connectors & SLI Bridge. Then for some extras - PCI USB 3.0 two ports bracket, guide headers for faster and easy connectivity and lastly voltage check points.
Next, the “Mainboard”. By physically looking at it and by comparing it side by side against the Z68A-GD80 B3 motherboard. You won’t find any difference except for the PCIE X16 locks. It has also the same black and blue color theme, two vrm heatsinks connected by a flat heatpipe and V-Check points.
Moving closer to the board you have 8 Power Pins to power up the processor, 2 PCI slots, 2 PCIE x1 slots for devices such as TV Tuners or Audio Cards. 2 PCIE Gen3 & 1 PCIE Gen2 x16 Slots. With one VC connected at the top most slot, speed will be @ x16. If both top and middle are used, it will be @ x8/x8. Lastly, by using the 3rd PCIEx16 Gen2 slot. You have x8/x8/x4. It would also disable certain onboard devices such as eSATA Port, Sata 7, one onboard front USB 3.0, two PCI Slots and firewire. So if possible avoid using the last VC slot.
At the top most PCIE x1 area. You will find a 6-pin power connector. This will provide more juice/power for multi-GPU setups.
Next, at the bottom part of the board. You have the Easy Buttons (Power and Reset) and the popular one button “OC Genie”. The red colored USB header is for the Super Charger while the blue is a regular USB 3.0. For the SATA Connectors you have a total of 7. 4 regular SATA 3GB/s, 2 SATA 6GB/s controlled by Intel chipset and another SATA 6GB/s by Marvell.
Wrapping things up, we have now the IO terminal ports. Starting from the left we have combo PS2 port and SPDIF Optical Out. Clear CMOS Button, e-SATA port running under Marvell, 2 USB 2.0 and Firewire ports controlled by Via. Moving across, 2 Gigabit Lan by Realtek 8111E, 2 USB 2.0 and 2 USB 3.0 run under NEC D720200 controller. Next, we have DVI and HDMI output connections and 6 analog audio ports by Realtek ALC892.
Once you are into the bios, you will find the new and improved Click Bios. Nice and professional looking, faster navigation and easier to use.
To test the performance of the new PCIE Gen3 technology, we will be using this Photofast PCIE SSD device http://www.photofast.tw/comboproducts.asp?pid=1.
We will be connecting the PCIE SSD device on the GD80’s Gen3 and Gen2 slots and compare the results using the disk benchmark software ATTO. I ran the benchmark 9 times for the two set of tests.
System Configuration as follows:
Processor: Intel Core i7 2600K at default stock speed
Memory: Kingston HyperX Genesis Grey 2x2GB DDR3 2133MHz
SSD: OCZ Vertex 2
Motherboard: MSI Z68A-GD80 G3
Softwares: CPU-Z 1.58, Windows 7 Ultimate 64 Bit with SP1, Latest Atto Software 1.47 I think.
First test, Photofast running on Gen2 (third VC slot). One screenshot from the 9 tests made
Second, using the Gen 3 connectivity. One screenshot from the 9 tests made
Below is the summary of all the tests done on the board with the Photofast SSD PCIE.
That’s probably it. More forum posts to come Quote
I have a eSata hdd Seagate Freeagent Xtreme 1,5tb which cannot be recognized by win7
Did you have your previous board's BIOS set to AHCI or IDE ? You need to set this BIOS the same.
Firstly only insert one RAM module in the slot closest to the CPU. Remove the rest. Then do full CMOS clear >>Clear CMOS Guide<< also remove the MB battery.
What BIOS do you currently have ? The initial BIOS releases were plagued by CPU throttling which have been fixed in the cyrrent beta BIOS releases. -
PCI-e wireless card causes lock ups Z87 MPower MAX
I've already asked this question once, but was part of an epic essay that I've decided to break down into smaller more manageable chunks (as unsurprisingly that one got no replies).
I've got an ASUS PCE-A66 wireless ac pci-e card. Had absolutely no issues with it in my old Z77 board, but I seem to be having a lot of issues with it in my new Z87 MPower MAX. System was locking up like mad when I was trying to install the drivers at first. Had to rip out the WiFi/Bluetooth/WiDi module to get the drivers installed but the system randomly hangs on boot up? Don't get the issues with the card unplugged and don't always get it with it plugged in, but there seems to be some form of conflict with it that I can't resolve. Has anyone else had any such issues with any PCI-e add in cards on this motherboard?
Specs are:
i7 4770k
MSI MPower MAX using .128 bios (will try the .131 later)
2x4GB Corsair Dominator Platinum 2400
Coolermaster Silent Pro Hybrid 1050w
EVGA NVidia GTX 780 SC ACX
Windows 8 Pro 64bitYes, old system was Win8 Pro 64 bit too and the drivers are Windows 8 certified. As I say though, I had no issues with it on the old build? Even got a replacement sent out by Amazon in case the card itself was damaged Did initially try to do a warm update of the hardware into the same OS installation but didn't play well so did a full re-install in the end. Tried standard and UEFI installs (just in case) and after a problem with my OCZ Vector 2 not being recognised I bought a new Samsung 840 Pro so was a virgin SSD installed on to as well.
I'll raise it directly with MSI but just wanted to know if anyone else had experienced anything similar with any wireless cards in this mobo.
Cheers for the reply though -
PCI 2.1 SLot on K7T Turbo Limited Edition?
I'm about to get a Firewire Card but I'm not sure whether my MB : K7T Turbo Limited Edition (MS-6330 v3.X) has a PCI 2.1 slot. I haven't found it in manual either. Can anybody help?
Thanks
minurecWelcome!
My Turbo2 manual doesn't specify either, but specs on MSI site for mine shows 32 bit PCI 2.2, usually backward compatible. Your MB is just one very short edition back, and I bet your slots are probably the same and 2.1 compatible. MSI shows yours as 32 bit, but w/o the #version. To my memory the 2.1 standard predates our MBs by a couple of years or more. I think you're safe to go. -
Pci lock confirmed on msi nforce 2
http://www.amdforums.com/showindex.php?s=&postid=1439990#post1439990
measured with a pc gieger by the wise one mod at amd forums
http://service.futuremark.com/compare?2k1=5598410
not bad for a locked xp 1600
3DMark2001 Project Comparison
You are not logged in or you have not submitted a project of this type. To compare your benchmark results, please log in, or if you do not have a Futuremark benchmark account, download and run 3DMark2001. For more information, refer to the How to Register page.
Compared Project Info
Name My Benchmark
Description nforce2 max ram timings, 1:1 FSB/RAM ratio, 175FSB, PCI locked at 33, AGP locked at 66 ram voltage at 2.6v, cpu voltage 1.75, air cooling, locked 1600+ AGOIA Y no riva tuner tweaks or any other tweaks. default benchmark run.
Date 2003-01-10
Compare URL
» http://service.futuremark.com/compare?2k1=5598410
System Configurations
Compared System
Operating System Microsoft Windows 2000
DirectX Version 8.1
Mobo Manufacturer MICRO-STAR INTERNATIONAL CO., LTD
Mobo Model MS-6570
AGP Rates
(Current/Available) 4x / 1x 2x 4x
CPU AMD Athlon(tm) XP/MP/4 1842 MHz
FSB 174 MHz
Memory 512 MB
Graphics Chipset NVIDIA GeForce4 Ti 4600
Driver Name NVIDIA GeForce4 Ti 4600
Driver Version 6.13.10.4072
Video Memory 128 MB
Program Version 3DMark2001 SE
Resolution 1024x768 32bit
Texture Format Compressed
FSAA Disabled
Z-Buffer Depth 24bit
Frame Buffer Double
Rendering Pipeline D3D Pure Hardware T&L
Test Result Comparisons
3DMark Score 13710 3D marks
Game 1 Car Chase - Low Detail 208.3 FPS
Game 1 Car Chase - High Detail 72.3 FPS
Game 2 Dragothic - Low Detail 243.1 FPS
Game 2 Dragothic - High Detail 129.9 FPS
Game 3 Lobby - Low Detail 184.5 FPS
Game 3 Lobby - High Detail 85.9 FPS
Game 4 Nature 79.4 FPS
Fill Rate (Single-Texturing) 1090.6 MTexels/s
Fill Rate (Multi-Texturing) 2331.9 MTexels/s
High Polygon Count (1 light) 55.8 MTriangels/s
High Polygon Count (8 lights) 12.6 MTriangels/s
Environment Bump Mapping 152.0 FPS
DOT3 Bump Mapping 154.0 FPS
Vertex Shader 99.8 FPS
Pixel Shader 124.8 FPS
Advanced Pixel Shader 102.0 FPS
Point Sprite 30.5 MSprites/s
AMD XP1600+, AGOIA Week 0213 "y"
very nice CPU. overclocks great. i know this thing can do more...but not being able to change the ram voltage in the bios (everytime i do, it reverts back to 2.6) stops me at 180. -
K7n2 delta, won't allow me to connect to the internet via pci modem
motherboard: K7n2 delta, nforce2 ultra
won't allow me to connect to the internet via pci modem
i have got 2 computers with same mobo, can connnect through external 56k
but the 2 internal 56ks (one in each computer), will not connect.
just dials then beeps, or no dialing tone.
the 2 internal ones are differnet makes, but connect through PCI
there must be something wrong with Mobo settings or pci stuff
all internet and modem settings are correct, etc etc etc
can u help
or does anyone have a pci 56k running on that mobo?Quote
Originally posted by Solway
i made my creative one work and dial, using pulse dialing, but it takes ages
but my other one has no dialing tone, its werid.
If your not hearing dial tone you might have your phone plugged into the wrong port. Most modems have 2 outlets, one is labeled line ( that is the one you should have plugged into the jack (RJ11C). If that's correct, query the modem and see if it tests OK, you may have a defective modem. -
MSI KT3 Ultra ARU PCI/AGP divider
Hey,
I'm using the overclocking features on the board, but i can't find the PCI/AGP adjustment in the BIOS, any body know what i can do??
I'm using the latest BIOS which is 5.6
CheersAh, now thats what i've been told but according to Sisoft Sandra my AGP is 86Mhz and PCI is 43Mhz so itdon't look like its kicked in.
Any advice, do i have a dodgy board? -
K9N Platinum SLI - Powering up the PCIe cards
Hey everyone,
I've got a K9N Platinum SLI board. This board has a power supply input point called PWR2, which according to the documentation is used to provide power to stable the operation of graphics cards. My graphic card is BFG nVidia 9750 GT. This card has the PCI-Express external power plug in the back, and my power supply has a dedicated (red) connector for this purpose, which I have attached properly.
The PWR2 is currently connected also, into one of the black 12V connectors. Otherwise, everything is running fine and smooth, but I am sometimes (once a day or so) experiencing random shutdowns during intense gaming (playing LotRO). Stress testing does not cause a shutdown: I've ran 3D Mark 2007 straight for 8-9 hours, while having a CPU Burner application toast the CPU at the same time. But no problems whatsoever. No other games exhibit this problem either.
Since I am providing dedicated power through the extra connector at the back of the card, should I leave the PWR2 connector unplugged ? Is there a chance that using these two connectors at the same time causes the 12V rail to overload, and the PSU shuts down to protect itself ? When this shut down occurs, the power LED is left blinking and I need to plug out the wall socket and wait for several minutes before the blinking stops and it starts up again.
My computer has an Enermax Liberty 620W power supply, and AMD Athlon X2 4600+ CPU. So there should be enough juice, at least. I've tried the tips and tricks suggested here. Using USB-connected Keyboard and Mouse does not correct the issue. I've also verified that this is not an overheating issue. My CPU is cooled by a Scythe Ninja tower heatsink and two 12 cm fans. It is possible that the northbride is heating up (it burns the finger on touch when under load), but from the Web, I've understood that the stock passive heatsink should be enough, and that the NB chip can take rather extreme temperatures.
* UPDATE *
Plugged the PWR2 connector out from the MB, and update the BIOS to 1.10. It's working as usual, but haven't ran any games yet. Heavy gaming usually reproduces the issue, so I'll write more when I know more.Updated information on the case.
I've been running 2 days now with the PWR2 unplugged. I have had zero problems with shutdowns since. The only problem I now have is that the USB keyboard and mouse refuse to work in Windows XP after an initial bootup from powered down state. I have to unplug and replug them at the login screen in order to get them work again.
So, I decided to do a final sanity check, and replugged the PWR2, then went gaming. After 2 hours of playing, my computer shutted down for the first time. Plugging in the cable did not solve the USB problem either.
As of this day, I'm leaving it unplugged. It seems like an irrelevant connector, which just causes problems.
** Update **
After following Bosskiller's instructions on another thread about using the "Clear CMOS" button and then reconfiguring BIOS from scratch, the cold boot USB issues were solved. The USB devices now work straight after a cold boot, with no need to replug them.
I recommend that the PWR2 -connector info is added to the list of known problems in the sticky thread. If you have a GPU card which takes its power from a dedicated rail (and your PSU has a dedicated connector for this purpose), then leaving the PWR2 -connector unplugged might resolve your shutdown issues, like it solved mine.
After all, according to the manual, this connector is used to give more voltage to the PCI and PCIe busses, and some PCI/PCIe cards might not like this idea at all. There is a reason why these cards have an additional power plug on them... -
[SOLVED] switching from onboard video to a pci express card
Hello,
I have an onboard video card [VGA compatible controller: NVIDIA Corporation C61 [GeForce 6150SE nForce 430] (rev a2)].
I have been running the nouveau driver, but the video card is not truly supported so I bought a [VGA compatible controller: NVIDIA Corporation GT218 [GeForce 8400 GS Rev. 3] (rev a2)].
However my lspci -k | grep -A 2 -i "VGA" gives this:
00:0d.0 VGA compatible controller: NVIDIA Corporation C61 [GeForce 6150SE nForce 430] (rev a2)
Subsystem: Hewlett-Packard Company Device 2a6c
Kernel driver in use: nouveau
02:00.0 VGA compatible controller: NVIDIA Corporation GT218 [GeForce 8400 GS Rev. 3] (rev a2)
Subsystem: eVga.com. Corp. Device 1302
Kernel driver in use: nouveau
Kernel modules: nouveau
Subsystem: eVga.com. Corp. Device 1302
Kernel driver in use: snd_hda_intel
Kernel modules: snd_hda_intel
And my xrandr -q gives:
Screen 0: minimum 320 x 200, current 1440 x 900, maximum 4096 x 4096
VGA-1 connected 1440x900+0+0 (normal left inverted right x axis y axis) 408mm x 255mm
1440x900 59.9*+ 75.0
1400x1050 60.0
1280x1024 60.0
1280x960 60.0
1152x864 75.0
1280x720 60.0
1024x768 75.1 70.1 66.0 60.0
832x624 74.6
800x600 72.2 75.0 60.3 56.2
640x480 72.8 75.0 66.7 60.0
720x400 70.1
I receive no output from the second card at all. Any help to troubleshoot this problem would be greatly appreciated. I simply would like to use one monitor through the VGA port on the new video card.
thanks.
Last edited by forshark (2013-05-30 19:10:25)Thanks for the reply,
My bios isn't awesome enough to allow me to disable onboard video or set a default card. I'll hunt around for the rest. Also I am using lxdm if that is helpful. Heres my Xorg.0.log:
[ 4.803]
X.Org X Server 1.14.1
Release Date: 2013-04-17
[ 4.803] X Protocol Version 11, Revision 0
[ 4.803] Build Operating System: Linux 3.8.7-1-ARCH x86_64
[ 4.803] Current Operating System: Linux office 3.9.4-1-ARCH #1 SMP PREEMPT Sat May 25 16:14:55 CEST 2013 x86_64
[ 4.803] Kernel command line: BOOT_IMAGE=/boot/vmlinuz-linux root=UUID=8e550028-e5f5-40c2-b8f9-f43ac9ebf8ef ro quiet
[ 4.803] Build Date: 17 April 2013 02:37:06PM
[ 4.803]
[ 4.803] Current version of pixman: 0.30.0
[ 4.803] Before reporting problems, check http://wiki.x.org
to make sure that you have the latest version.
[ 4.803] Markers: (--) probed, (**) from config file, (==) default setting,
(++) from command line, (!!) notice, (II) informational,
(WW) warning, (EE) error, (NI) not implemented, (??) unknown.
[ 4.803] (==) Log file: "/var/log/Xorg.0.log", Time: Thu May 30 12:51:52 2013
[ 4.807] (==) Using config directory: "/etc/X11/xorg.conf.d"
[ 4.808] (==) No Layout section. Using the first Screen section.
[ 4.808] (==) No screen section available. Using defaults.
[ 4.808] (**) |-->Screen "Default Screen Section" (0)
[ 4.808] (**) | |-->Monitor "<default monitor>"
[ 4.808] (==) No monitor specified for screen "Default Screen Section".
Using a default monitor configuration.
[ 4.808] (==) Automatically adding devices
[ 4.808] (==) Automatically enabling devices
[ 4.808] (==) Automatically adding GPU devices
[ 4.812] (WW) The directory "/usr/share/fonts/OTF/" does not exist.
[ 4.812] Entry deleted from font path.
[ 4.813] (WW) `fonts.dir' not found (or not valid) in "/usr/share/fonts/100dpi/".
[ 4.813] Entry deleted from font path.
[ 4.813] (Run 'mkfontdir' on "/usr/share/fonts/100dpi/").
[ 4.813] (WW) `fonts.dir' not found (or not valid) in "/usr/share/fonts/75dpi/".
[ 4.813] Entry deleted from font path.
[ 4.813] (Run 'mkfontdir' on "/usr/share/fonts/75dpi/").
[ 4.813] (==) FontPath set to:
/usr/share/fonts/misc/,
/usr/share/fonts/TTF/,
/usr/share/fonts/Type1/
[ 4.813] (==) ModulePath set to "/usr/lib/xorg/modules"
[ 4.813] (II) The server relies on udev to provide the list of input devices.
If no devices become available, reconfigure udev or disable AutoAddDevices.
[ 4.813] (II) Loader magic: 0x7fcc20
[ 4.813] (II) Module ABI versions:
[ 4.813] X.Org ANSI C Emulation: 0.4
[ 4.813] X.Org Video Driver: 14.1
[ 4.813] X.Org XInput driver : 19.1
[ 4.813] X.Org Server Extension : 7.0
[ 4.814] (II) config/udev: Adding drm device (/dev/dri/card1)
[ 4.814] (II) config/udev: Adding drm device (/dev/dri/card0)
[ 4.816] (--) PCI:*(0:0:13:0) 10de:03d0:103c:2a6c rev 162, Mem @ 0xfc000000/16777216, 0xc0000000/268435456, 0xfb000000/16777216, BIOS @ 0x????????/131072
[ 4.816] (--) PCI: (0:2:0:0) 10de:10c3:3842:1302 rev 162, Mem @ 0xf9000000/16777216, 0xd0000000/268435456, 0xee000000/33554432, I/O @ 0x0000dc00/128, BIOS @ 0x????????/524288
[ 4.816] Initializing built-in extension Generic Event Extension
[ 4.816] Initializing built-in extension SHAPE
[ 4.816] Initializing built-in extension MIT-SHM
[ 4.816] Initializing built-in extension XInputExtension
[ 4.816] Initializing built-in extension XTEST
[ 4.816] Initializing built-in extension BIG-REQUESTS
[ 4.816] Initializing built-in extension SYNC
[ 4.816] Initializing built-in extension XKEYBOARD
[ 4.816] Initializing built-in extension XC-MISC
[ 4.816] Initializing built-in extension SECURITY
[ 4.816] Initializing built-in extension XINERAMA
[ 4.816] Initializing built-in extension XFIXES
[ 4.816] Initializing built-in extension RENDER
[ 4.816] Initializing built-in extension RANDR
[ 4.816] Initializing built-in extension COMPOSITE
[ 4.816] Initializing built-in extension DAMAGE
[ 4.816] Initializing built-in extension MIT-SCREEN-SAVER
[ 4.816] Initializing built-in extension DOUBLE-BUFFER
[ 4.816] Initializing built-in extension RECORD
[ 4.816] Initializing built-in extension DPMS
[ 4.816] Initializing built-in extension X-Resource
[ 4.817] Initializing built-in extension XVideo
[ 4.817] Initializing built-in extension XVideo-MotionCompensation
[ 4.817] Initializing built-in extension XFree86-VidModeExtension
[ 4.817] Initializing built-in extension XFree86-DGA
[ 4.817] Initializing built-in extension XFree86-DRI
[ 4.817] Initializing built-in extension DRI2
[ 4.817] (II) LoadModule: "glx"
[ 4.818] (II) Loading /usr/lib/xorg/modules/extensions/libglx.so
[ 4.822] (II) Module glx: vendor="X.Org Foundation"
[ 4.822] compiled for 1.14.1, module version = 1.0.0
[ 4.822] ABI class: X.Org Server Extension, version 7.0
[ 4.822] (==) AIGLX enabled
[ 4.823] Loading extension GLX
[ 4.823] (==) Matched nouveau as autoconfigured driver 0
[ 4.823] (==) Matched nvidia as autoconfigured driver 1
[ 4.823] (==) Matched nv as autoconfigured driver 2
[ 4.823] (==) Matched nouveau as autoconfigured driver 3
[ 4.823] (==) Matched nvidia as autoconfigured driver 4
[ 4.823] (==) Matched nv as autoconfigured driver 5
[ 4.823] (==) Matched nouveau as autoconfigured driver 6
[ 4.823] (==) Matched nvidia as autoconfigured driver 7
[ 4.823] (==) Matched nv as autoconfigured driver 8
[ 4.823] (==) Matched vesa as autoconfigured driver 9
[ 4.823] (==) Matched modesetting as autoconfigured driver 10
[ 4.823] (==) Matched fbdev as autoconfigured driver 11
[ 4.823] (==) Assigned the driver to the xf86ConfigLayout
[ 4.823] (II) LoadModule: "nouveau"
[ 4.823] (II) Loading /usr/lib/xorg/modules/drivers/nouveau_drv.so
[ 4.826] (II) Module nouveau: vendor="X.Org Foundation"
[ 4.826] compiled for 1.14.0, module version = 1.0.7
[ 4.826] Module class: X.Org Video Driver
[ 4.826] ABI class: X.Org Video Driver, version 14.1
[ 4.826] (II) LoadModule: "nvidia"
[ 4.827] (WW) Warning, couldn't open module nvidia
[ 4.827] (II) UnloadModule: "nvidia"
[ 4.827] (II) Unloading nvidia
[ 4.827] (EE) Failed to load module "nvidia" (module does not exist, 0)
[ 4.827] (II) LoadModule: "nv"
[ 4.827] (WW) Warning, couldn't open module nv
[ 4.827] (II) UnloadModule: "nv"
[ 4.827] (II) Unloading nv
[ 4.827] (EE) Failed to load module "nv" (module does not exist, 0)
[ 4.827] (II) LoadModule: "vesa"
[ 4.827] (II) Loading /usr/lib/xorg/modules/drivers/vesa_drv.so
[ 4.828] (II) Module vesa: vendor="X.Org Foundation"
[ 4.828] compiled for 1.14.0, module version = 2.3.2
[ 4.828] Module class: X.Org Video Driver
[ 4.828] ABI class: X.Org Video Driver, version 14.1
[ 4.828] (II) LoadModule: "modesetting"
[ 4.828] (WW) Warning, couldn't open module modesetting
[ 4.828] (II) UnloadModule: "modesetting"
[ 4.828] (II) Unloading modesetting
[ 4.828] (EE) Failed to load module "modesetting" (module does not exist, 0)
[ 4.828] (II) LoadModule: "fbdev"
[ 4.829] (WW) Warning, couldn't open module fbdev
[ 4.829] (II) UnloadModule: "fbdev"
[ 4.829] (II) Unloading fbdev
[ 4.829] (EE) Failed to load module "fbdev" (module does not exist, 0)
[ 4.829] (II) NOUVEAU driver
[ 4.829] (II) NOUVEAU driver for NVIDIA chipset families :
[ 4.829] RIVA TNT (NV04)
[ 4.829] RIVA TNT2 (NV05)
[ 4.829] GeForce 256 (NV10)
[ 4.829] GeForce 2 (NV11, NV15)
[ 4.829] GeForce 4MX (NV17, NV18)
[ 4.829] GeForce 3 (NV20)
[ 4.829] GeForce 4Ti (NV25, NV28)
[ 4.829] GeForce FX (NV3x)
[ 4.829] GeForce 6 (NV4x)
[ 4.829] GeForce 7 (G7x)
[ 4.829] GeForce 8 (G8x)
[ 4.829] GeForce GTX 200 (NVA0)
[ 4.829] GeForce GTX 400 (NVC0)
[ 4.829] (II) VESA: driver for VESA chipsets: vesa
[ 4.829] (++) using VT number 7
[ 4.834] (II) [drm] nouveau interface version: 1.1.0
[ 4.834] (II) [drm] nouveau interface version: 1.1.0
[ 4.834] (WW) Falling back to old probe method for vesa
[ 4.834] (II) Loading sub module "dri"
[ 4.834] (II) LoadModule: "dri"
[ 4.835] (II) Module "dri" already built-in
[ 4.835] (II) NOUVEAU(0): Loaded DRI module
[ 4.835] (--) NOUVEAU(0): Chipset: "NVIDIA NV4c"
[ 4.835] (II) NOUVEAU(0): Creating default Display subsection in Screen section
"Default Screen Section" for depth/fbbpp 24/32
[ 4.835] (==) NOUVEAU(0): Depth 24, (--) framebuffer bpp 32
[ 4.835] (==) NOUVEAU(0): RGB weight 888
[ 4.835] (==) NOUVEAU(0): Default visual is TrueColor
[ 4.835] (==) NOUVEAU(0): Using HW cursor
[ 4.835] (==) NOUVEAU(0): GLX sync to VBlank disabled.
[ 4.835] (==) NOUVEAU(0): Page flipping enabled
[ 4.835] (==) NOUVEAU(0): Swap limit set to 2 [Max allowed 2]
[ 4.927] (II) NOUVEAU(0): Output VGA-1 has no monitor section
[ 4.989] (II) NOUVEAU(0): EDID for output VGA-1
[ 4.989] (II) NOUVEAU(0): Manufacturer: HSD Model: 240f Serial#: 0
[ 4.989] (II) NOUVEAU(0): Year: 2010 Week: 52
[ 4.989] (II) NOUVEAU(0): EDID Version: 1.3
[ 4.990] (II) NOUVEAU(0): Analog Display Input, Input Voltage Level: 0.700/0.300 V
[ 4.990] (II) NOUVEAU(0): Sync: Separate SyncOnGreen
[ 4.990] (II) NOUVEAU(0): Max Image Size [cm]: horiz.: 41 vert.: 26
[ 4.990] (II) NOUVEAU(0): Gamma: 2.20
[ 4.990] (II) NOUVEAU(0): DPMS capabilities: StandBy Suspend Off; RGB/Color Display
[ 4.990] (II) NOUVEAU(0): First detailed timing is preferred mode
[ 4.990] (II) NOUVEAU(0): redX: 0.640 redY: 0.329 greenX: 0.300 greenY: 0.600
[ 4.990] (II) NOUVEAU(0): blueX: 0.150 blueY: 0.060 whiteX: 0.313 whiteY: 0.329
[ 4.990] (II) NOUVEAU(0): Supported established timings:
[ 4.990] (II) NOUVEAU(0): 720x400@70Hz
[ 4.990] (II) NOUVEAU(0): 640x480@60Hz
[ 4.990] (II) NOUVEAU(0): 640x480@67Hz
[ 4.990] (II) NOUVEAU(0): 640x480@72Hz
[ 4.990] (II) NOUVEAU(0): 640x480@75Hz
[ 4.990] (II) NOUVEAU(0): 800x600@56Hz
[ 4.990] (II) NOUVEAU(0): 800x600@60Hz
[ 4.990] (II) NOUVEAU(0): 800x600@72Hz
[ 4.990] (II) NOUVEAU(0): 800x600@75Hz
[ 4.990] (II) NOUVEAU(0): 832x624@75Hz
[ 4.990] (II) NOUVEAU(0): 1024x768@60Hz
[ 4.990] (II) NOUVEAU(0): 1024x768@70Hz
[ 4.990] (II) NOUVEAU(0): 1024x768@75Hz
[ 4.990] (II) NOUVEAU(0): 1152x864@75Hz
[ 4.990] (II) NOUVEAU(0): Manufacturer's mask: 0
[ 4.990] (II) NOUVEAU(0): Supported standard timings:
[ 4.990] (II) NOUVEAU(0): #0: hsize: 1440 vsize 900 refresh: 75 vid: 3989
[ 4.990] (II) NOUVEAU(0): #1: hsize: 1400 vsize 1050 refresh: 60 vid: 16528
[ 4.990] (II) NOUVEAU(0): #2: hsize: 1280 vsize 1024 refresh: 60 vid: 32897
[ 4.990] (II) NOUVEAU(0): #3: hsize: 1280 vsize 960 refresh: 60 vid: 16513
[ 4.990] (II) NOUVEAU(0): #4: hsize: 1280 vsize 720 refresh: 60 vid: 49281
[ 4.990] (II) NOUVEAU(0): #5: hsize: 1152 vsize 864 refresh: 75 vid: 20337
[ 4.990] (II) NOUVEAU(0): #6: hsize: 1024 vsize 768 refresh: 66 vid: 18017
[ 4.990] (II) NOUVEAU(0): Supported detailed timing:
[ 4.990] (II) NOUVEAU(0): clock: 106.5 MHz Image Size: 408 x 255 mm
[ 4.990] (II) NOUVEAU(0): h_active: 1440 h_sync: 1520 h_sync_end 1672 h_blank_end 1904 h_border: 0
[ 4.990] (II) NOUVEAU(0): v_active: 900 v_sync: 903 v_sync_end 909 v_blanking: 934 v_border: 0
[ 4.990] (II) NOUVEAU(0): Serial No: 052AW1WY01107
[ 4.990] (II) NOUVEAU(0): Ranges: V min: 56 V max: 75 Hz, H min: 24 H max: 75 kHz, PixClock max 145 MHz
[ 4.990] (II) NOUVEAU(0): Monitor name: iP192A
[ 4.990] (II) NOUVEAU(0): EDID (in hex):
[ 4.990] (II) NOUVEAU(0): 00ffffffffffff0022640f2400000000
[ 4.990] (II) NOUVEAU(0): 341401030a291a78eade95a3544c9926
[ 4.990] (II) NOUVEAU(0): 0f5054bfee80950f90408180814081c0
[ 4.990] (II) NOUVEAU(0): 714f614601019a29a0d0518422305098
[ 4.990] (II) NOUVEAU(0): 360098ff1000001c000000ff00303532
[ 4.990] (II) NOUVEAU(0): 41573157593031313037000000fd0038
[ 4.990] (II) NOUVEAU(0): 4b184b0e000a202020202020000000fc
[ 4.990] (II) NOUVEAU(0): 006950313932410a0a0a0a0a0a0a0047
[ 4.991] (II) NOUVEAU(0): Printing probed modes for output VGA-1
[ 4.991] (II) NOUVEAU(0): Modeline "1440x900"x59.9 106.50 1440 1520 1672 1904 900 903 909 934 -hsync +vsync (55.9 kHz eP)
[ 4.991] (II) NOUVEAU(0): Modeline "1400x1050"x60.0 121.75 1400 1488 1632 1864 1050 1053 1057 1089 -hsync +vsync (65.3 kHz e)
[ 4.991] (II) NOUVEAU(0): Modeline "1280x1024"x60.0 108.00 1280 1328 1440 1688 1024 1025 1028 1066 +hsync +vsync (64.0 kHz e)
[ 4.991] (II) NOUVEAU(0): Modeline "1440x900"x75.0 136.75 1440 1536 1688 1936 900 903 909 942 -hsync +vsync (70.6 kHz e)
[ 4.991] (II) NOUVEAU(0): Modeline "1280x960"x60.0 108.00 1280 1376 1488 1800 960 961 964 1000 +hsync +vsync (60.0 kHz e)
[ 4.991] (II) NOUVEAU(0): Modeline "1152x864"x75.0 108.00 1152 1216 1344 1600 864 865 868 900 +hsync +vsync (67.5 kHz e)
[ 4.991] (II) NOUVEAU(0): Modeline "1280x720"x60.0 74.44 1280 1336 1472 1664 720 721 724 746 -hsync +vsync (44.7 kHz)
[ 4.991] (II) NOUVEAU(0): Modeline "1024x768"x75.1 78.80 1024 1040 1136 1312 768 769 772 800 +hsync +vsync (60.1 kHz e)
[ 4.991] (II) NOUVEAU(0): Modeline "1024x768"x70.1 75.00 1024 1048 1184 1328 768 771 777 806 -hsync -vsync (56.5 kHz e)
[ 4.991] (II) NOUVEAU(0): Modeline "1024x768"x66.0 71.64 1024 1080 1192 1360 768 769 772 798 -hsync +vsync (52.7 kHz)
[ 4.991] (II) NOUVEAU(0): Modeline "1024x768"x60.0 65.00 1024 1048 1184 1344 768 771 777 806 -hsync -vsync (48.4 kHz e)
[ 4.991] (II) NOUVEAU(0): Modeline "832x624"x74.6 57.28 832 864 928 1152 624 625 628 667 -hsync -vsync (49.7 kHz e)
[ 4.991] (II) NOUVEAU(0): Modeline "800x600"x72.2 50.00 800 856 976 1040 600 637 643 666 +hsync +vsync (48.1 kHz e)
[ 4.991] (II) NOUVEAU(0): Modeline "800x600"x75.0 49.50 800 816 896 1056 600 601 604 625 +hsync +vsync (46.9 kHz e)
[ 4.991] (II) NOUVEAU(0): Modeline "800x600"x60.3 40.00 800 840 968 1056 600 601 605 628 +hsync +vsync (37.9 kHz e)
[ 4.991] (II) NOUVEAU(0): Modeline "800x600"x56.2 36.00 800 824 896 1024 600 601 603 625 +hsync +vsync (35.2 kHz e)
[ 4.991] (II) NOUVEAU(0): Modeline "640x480"x72.8 31.50 640 664 704 832 480 489 491 520 -hsync -vsync (37.9 kHz e)
[ 4.991] (II) NOUVEAU(0): Modeline "640x480"x75.0 31.50 640 656 720 840 480 481 484 500 -hsync -vsync (37.5 kHz e)
[ 4.991] (II) NOUVEAU(0): Modeline "640x480"x66.7 30.24 640 704 768 864 480 483 486 525 -hsync -vsync (35.0 kHz e)
[ 4.991] (II) NOUVEAU(0): Modeline "640x480"x60.0 25.20 640 656 752 800 480 490 492 525 -hsync -vsync (31.5 kHz e)
[ 4.991] (II) NOUVEAU(0): Modeline "720x400"x70.1 28.32 720 738 846 900 400 412 414 449 -hsync +vsync (31.5 kHz e)
[ 4.991] (II) NOUVEAU(0): Output VGA-1 connected
[ 4.991] (II) NOUVEAU(0): Using exact sizes for initial modes
[ 4.991] (II) NOUVEAU(0): Output VGA-1 using initial mode 1440x900
[ 4.991] (II) NOUVEAU(0): Using default gamma of (1.0, 1.0, 1.0) unless otherwise stated.
[ 4.991] (--) NOUVEAU(0): Virtual size is 1440x900 (pitch 0)
[ 4.991] (**) NOUVEAU(0): Driver mode "1440x900": 106.5 MHz (scaled from 0.0 MHz), 55.9 kHz, 59.9 Hz
[ 4.991] (II) NOUVEAU(0): Modeline "1440x900"x59.9 106.50 1440 1520 1672 1904 900 903 909 934 -hsync +vsync (55.9 kHz eP)
[ 4.991] (**) NOUVEAU(0): Driver mode "1400x1050": 121.8 MHz (scaled from 0.0 MHz), 65.3 kHz, 60.0 Hz
[ 4.991] (II) NOUVEAU(0): Modeline "1400x1050"x60.0 121.75 1400 1488 1632 1864 1050 1053 1057 1089 -hsync +vsync (65.3 kHz e)
[ 4.991] (**) NOUVEAU(0): Driver mode "1280x1024": 108.0 MHz (scaled from 0.0 MHz), 64.0 kHz, 60.0 Hz
[ 4.991] (II) NOUVEAU(0): Modeline "1280x1024"x60.0 108.00 1280 1328 1440 1688 1024 1025 1028 1066 +hsync +vsync (64.0 kHz e)
[ 4.991] (**) NOUVEAU(0): Driver mode "1440x900": 136.8 MHz (scaled from 0.0 MHz), 70.6 kHz, 75.0 Hz
[ 4.991] (II) NOUVEAU(0): Modeline "1440x900"x75.0 136.75 1440 1536 1688 1936 900 903 909 942 -hsync +vsync (70.6 kHz e)
[ 4.991] (**) NOUVEAU(0): Driver mode "1280x960": 108.0 MHz (scaled from 0.0 MHz), 60.0 kHz, 60.0 Hz
[ 4.991] (II) NOUVEAU(0): Modeline "1280x960"x60.0 108.00 1280 1376 1488 1800 960 961 964 1000 +hsync +vsync (60.0 kHz e)
[ 4.991] (**) NOUVEAU(0): Driver mode "1152x864": 108.0 MHz (scaled from 0.0 MHz), 67.5 kHz, 75.0 Hz
[ 4.991] (II) NOUVEAU(0): Modeline "1152x864"x75.0 108.00 1152 1216 1344 1600 864 865 868 900 +hsync +vsync (67.5 kHz e)
[ 4.991] (**) NOUVEAU(0): Mode "1280x720": 74.4 MHz (scaled from 0.0 MHz), 44.7 kHz, 60.0 Hz
[ 4.991] (II) NOUVEAU(0): Modeline "1280x720"x60.0 74.44 1280 1336 1472 1664 720 721 724 746 -hsync +vsync (44.7 kHz)
[ 4.991] (**) NOUVEAU(0): Driver mode "1024x768": 78.8 MHz (scaled from 0.0 MHz), 60.1 kHz, 75.1 Hz
[ 4.991] (II) NOUVEAU(0): Modeline "1024x768"x75.1 78.80 1024 1040 1136 1312 768 769 772 800 +hsync +vsync (60.1 kHz e)
[ 4.991] (**) NOUVEAU(0): Driver mode "1024x768": 75.0 MHz (scaled from 0.0 MHz), 56.5 kHz, 70.1 Hz
[ 4.991] (II) NOUVEAU(0): Modeline "1024x768"x70.1 75.00 1024 1048 1184 1328 768 771 777 806 -hsync -vsync (56.5 kHz e)
[ 4.991] (**) NOUVEAU(0): Mode "1024x768": 71.6 MHz (scaled from 0.0 MHz), 52.7 kHz, 66.0 Hz
[ 4.991] (II) NOUVEAU(0): Modeline "1024x768"x66.0 71.64 1024 1080 1192 1360 768 769 772 798 -hsync +vsync (52.7 kHz)
[ 4.991] (**) NOUVEAU(0): Driver mode "1024x768": 65.0 MHz (scaled from 0.0 MHz), 48.4 kHz, 60.0 Hz
[ 4.991] (II) NOUVEAU(0): Modeline "1024x768"x60.0 65.00 1024 1048 1184 1344 768 771 777 806 -hsync -vsync (48.4 kHz e)
[ 4.991] (**) NOUVEAU(0): Driver mode "832x624": 57.3 MHz (scaled from 0.0 MHz), 49.7 kHz, 74.6 Hz
[ 4.991] (II) NOUVEAU(0): Modeline "832x624"x74.6 57.28 832 864 928 1152 624 625 628 667 -hsync -vsync (49.7 kHz e)
[ 4.991] (**) NOUVEAU(0): Driver mode "800x600": 50.0 MHz (scaled from 0.0 MHz), 48.1 kHz, 72.2 Hz
[ 4.991] (II) NOUVEAU(0): Modeline "800x600"x72.2 50.00 800 856 976 1040 600 637 643 666 +hsync +vsync (48.1 kHz e)
[ 4.991] (**) NOUVEAU(0): Driver mode "800x600": 49.5 MHz (scaled from 0.0 MHz), 46.9 kHz, 75.0 Hz
[ 4.991] (II) NOUVEAU(0): Modeline "800x600"x75.0 49.50 800 816 896 1056 600 601 604 625 +hsync +vsync (46.9 kHz e)
[ 4.991] (**) NOUVEAU(0): Driver mode "800x600": 40.0 MHz (scaled from 0.0 MHz), 37.9 kHz, 60.3 Hz
[ 4.991] (II) NOUVEAU(0): Modeline "800x600"x60.3 40.00 800 840 968 1056 600 601 605 628 +hsync +vsync (37.9 kHz e)
[ 4.991] (**) NOUVEAU(0): Driver mode "800x600": 36.0 MHz (scaled from 0.0 MHz), 35.2 kHz, 56.2 Hz
[ 4.991] (II) NOUVEAU(0): Modeline "800x600"x56.2 36.00 800 824 896 1024 600 601 603 625 +hsync +vsync (35.2 kHz e)
[ 4.991] (**) NOUVEAU(0): Driver mode "640x480": 31.5 MHz (scaled from 0.0 MHz), 37.9 kHz, 72.8 Hz
[ 4.991] (II) NOUVEAU(0): Modeline "640x480"x72.8 31.50 640 664 704 832 480 489 491 520 -hsync -vsync (37.9 kHz e)
[ 4.991] (**) NOUVEAU(0): Driver mode "640x480": 31.5 MHz (scaled from 0.0 MHz), 37.5 kHz, 75.0 Hz
[ 4.991] (II) NOUVEAU(0): Modeline "640x480"x75.0 31.50 640 656 720 840 480 481 484 500 -hsync -vsync (37.5 kHz e)
[ 4.991] (**) NOUVEAU(0): Driver mode "640x480": 30.2 MHz (scaled from 0.0 MHz), 35.0 kHz, 66.7 Hz
[ 4.992] (II) NOUVEAU(0): Modeline "640x480"x66.7 30.24 640 704 768 864 480 483 486 525 -hsync -vsync (35.0 kHz e)
[ 4.992] (**) NOUVEAU(0): Driver mode "640x480": 25.2 MHz (scaled from 0.0 MHz), 31.5 kHz, 60.0 Hz
[ 4.992] (II) NOUVEAU(0): Modeline "640x480"x60.0 25.20 640 656 752 800 480 490 492 525 -hsync -vsync (31.5 kHz e)
[ 4.992] (**) NOUVEAU(0): Driver mode "720x400": 28.3 MHz (scaled from 0.0 MHz), 31.5 kHz, 70.1 Hz
[ 4.992] (II) NOUVEAU(0): Modeline "720x400"x70.1 28.32 720 738 846 900 400 412 414 449 -hsync +vsync (31.5 kHz e)
[ 4.992] (==) NOUVEAU(0): DPI set to (96, 96)
[ 4.992] (II) Loading sub module "fb"
[ 4.992] (II) LoadModule: "fb"
[ 4.992] (II) Loading /usr/lib/xorg/modules/libfb.so
[ 5.023] (II) Module fb: vendor="X.Org Foundation"
[ 5.023] compiled for 1.14.1, module version = 1.0.0
[ 5.023] ABI class: X.Org ANSI C Emulation, version 0.4
[ 5.023] (II) Loading sub module "exa"
[ 5.023] (II) LoadModule: "exa"
[ 5.023] (II) Loading /usr/lib/xorg/modules/libexa.so
[ 5.025] (II) Module exa: vendor="X.Org Foundation"
[ 5.026] compiled for 1.14.1, module version = 2.6.0
[ 5.026] ABI class: X.Org Video Driver, version 14.1
[ 5.026] (II) Loading sub module "shadowfb"
[ 5.026] (II) LoadModule: "shadowfb"
[ 5.026] (II) Loading /usr/lib/xorg/modules/libshadowfb.so
[ 5.029] (II) Module shadowfb: vendor="X.Org Foundation"
[ 5.029] compiled for 1.14.1, module version = 1.0.0
[ 5.029] ABI class: X.Org ANSI C Emulation, version 0.4
[ 5.029] (II) Loading sub module "dri"
[ 5.029] (II) LoadModule: "dri"
[ 5.029] (II) Module "dri" already built-in
[ 5.029] (II) NOUVEAU(G0): Loaded DRI module
[ 5.029] (--) NOUVEAU(G0): Chipset: "NVIDIA NVa8"
[ 5.029] (==) NOUVEAU(G0): Depth 24, (--) framebuffer bpp 32
[ 5.029] (==) NOUVEAU(G0): RGB weight 888
[ 5.029] (==) NOUVEAU(G0): Default visual is TrueColor
[ 5.029] (==) NOUVEAU(G0): Using HW cursor
[ 5.029] (==) NOUVEAU(G0): GLX sync to VBlank disabled.
[ 5.029] (==) NOUVEAU(G0): Page flipping enabled
[ 5.029] (==) NOUVEAU(G0): Swap limit set to 2 [Max allowed 2]
[ 5.060] (II) NOUVEAU(G0): Output DVI-I-1 has no monitor section
[ 5.068] (II) NOUVEAU(G0): Output HDMI-1 has no monitor section
[ 5.178] (II) NOUVEAU(G0): Output VGA-2 has no monitor section
[ 5.189] (II) NOUVEAU(G0): EDID for output DVI-I-1
[ 5.196] (II) NOUVEAU(G0): EDID for output HDMI-1
[ 5.249] (II) NOUVEAU(G0): EDID for output VGA-2
[ 5.249] (II) NOUVEAU(G0): Manufacturer: DEL Model: a00c Serial#: 808793676
[ 5.249] (II) NOUVEAU(G0): Year: 2004 Week: 47
[ 5.249] (II) NOUVEAU(G0): EDID Version: 1.3
[ 5.249] (II) NOUVEAU(G0): Analog Display Input, Input Voltage Level: 0.700/0.700 V
[ 5.249] (II) NOUVEAU(G0): Sync: Separate
[ 5.249] (II) NOUVEAU(G0): Max Image Size [cm]: horiz.: 30 vert.: 23
[ 5.249] (II) NOUVEAU(G0): Gamma: 2.20
[ 5.249] (II) NOUVEAU(G0): DPMS capabilities: Off; RGB/Color Display
[ 5.249] (II) NOUVEAU(G0): Default color space is primary color space
[ 5.249] (II) NOUVEAU(G0): First detailed timing is preferred mode
[ 5.249] (II) NOUVEAU(G0): redX: 0.631 redY: 0.347 greenX: 0.309 greenY: 0.582
[ 5.249] (II) NOUVEAU(G0): blueX: 0.149 blueY: 0.088 whiteX: 0.312 whiteY: 0.328
[ 5.249] (II) NOUVEAU(G0): Supported established timings:
[ 5.249] (II) NOUVEAU(G0): 720x400@70Hz
[ 5.249] (II) NOUVEAU(G0): 640x480@60Hz
[ 5.249] (II) NOUVEAU(G0): 640x480@72Hz
[ 5.249] (II) NOUVEAU(G0): 640x480@75Hz
[ 5.249] (II) NOUVEAU(G0): 800x600@56Hz
[ 5.249] (II) NOUVEAU(G0): 800x600@60Hz
[ 5.249] (II) NOUVEAU(G0): 800x600@72Hz
[ 5.249] (II) NOUVEAU(G0): 800x600@75Hz
[ 5.249] (II) NOUVEAU(G0): 1024x768@60Hz
[ 5.249] (II) NOUVEAU(G0): 1024x768@70Hz
[ 5.249] (II) NOUVEAU(G0): 1024x768@75Hz
[ 5.249] (II) NOUVEAU(G0): Manufacturer's mask: 0
[ 5.249] (II) NOUVEAU(G0): Supported detailed timing:
[ 5.249] (II) NOUVEAU(G0): clock: 65.0 MHz Image Size: 304 x 228 mm
[ 5.249] (II) NOUVEAU(G0): h_active: 1024 h_sync: 1048 h_sync_end 1184 h_blank_end 1344 h_border: 0
[ 5.249] (II) NOUVEAU(G0): v_active: 768 v_sync: 771 v_sync_end 777 v_blanking: 806 v_border: 0
[ 5.249] (II) NOUVEAU(G0): Ranges: V min: 56 V max: 76 Hz, H min: 30 H max: 63 kHz, PixClock max 85 MHz
[ 5.249] (II) NOUVEAU(G0): Serial No: D82544BF056L
[ 5.249] (II) NOUVEAU(G0): Monitor name: DELL E153FP
[ 5.249] (II) NOUVEAU(G0): EDID (in hex):
[ 5.249] (II) NOUVEAU(G0): 00ffffffffffff0010ac0ca04c363530
[ 5.253] (II) NOUVEAU(G0): 2f0e0103681e17782eb060a1584f9526
[ 5.253] (II) NOUVEAU(G0): 165054afce0001010101010101010101
[ 5.253] (II) NOUVEAU(G0): 01010101010164190040410026301888
[ 5.253] (II) NOUVEAU(G0): 360030e410000018000000fd00384c1e
[ 5.253] (II) NOUVEAU(G0): 3f08000a202020202020000000ff0044
[ 5.253] (II) NOUVEAU(G0): 383235343442463035364c0a000000fc
[ 5.253] (II) NOUVEAU(G0): 0044454c4c204531353346500a200025
[ 5.253] (II) NOUVEAU(G0): Printing probed modes for output VGA-2
[ 5.253] (II) NOUVEAU(G0): Modeline "1024x768"x60.0 65.00 1024 1048 1184 1344 768 771 777 806 -hsync -vsync (48.4 kHz eP)
[ 5.253] (II) NOUVEAU(G0): Modeline "1024x768"x75.1 78.80 1024 1040 1136 1312 768 769 772 800 +hsync +vsync (60.1 kHz e)
[ 5.253] (II) NOUVEAU(G0): Modeline "1024x768"x70.1 75.00 1024 1048 1184 1328 768 771 777 806 -hsync -vsync (56.5 kHz e)
[ 5.253] (II) NOUVEAU(G0): Modeline "800x600"x72.2 50.00 800 856 976 1040 600 637 643 666 +hsync +vsync (48.1 kHz e)
[ 5.253] (II) NOUVEAU(G0): Modeline "800x600"x75.0 49.50 800 816 896 1056 600 601 604 625 +hsync +vsync (46.9 kHz e)
[ 5.253] (II) NOUVEAU(G0): Modeline "800x600"x60.3 40.00 800 840 968 1056 600 601 605 628 +hsync +vsync (37.9 kHz e)
[ 5.253] (II) NOUVEAU(G0): Modeline "800x600"x56.2 36.00 800 824 896 1024 600 601 603 625 +hsync +vsync (35.2 kHz e)
[ 5.253] (II) NOUVEAU(G0): Modeline "640x480"x72.8 31.50 640 664 704 832 480 489 491 520 -hsync -vsync (37.9 kHz e)
[ 5.253] (II) NOUVEAU(G0): Modeline "640x480"x75.0 31.50 640 656 720 840 480 481 484 500 -hsync -vsync (37.5 kHz e)
[ 5.253] (II) NOUVEAU(G0): Modeline "640x480"x60.0 25.20 640 656 752 800 480 490 492 525 -hsync -vsync (31.5 kHz e)
[ 5.253] (II) NOUVEAU(G0): Modeline "720x400"x70.1 28.32 720 738 846 900 400 412 414 449 -hsync +vsync (31.5 kHz e)
[ 5.253] (II) NOUVEAU(G0): Output DVI-I-1 disconnected
[ 5.253] (II) NOUVEAU(G0): Output HDMI-1 disconnected
[ 5.253] (II) NOUVEAU(G0): Output VGA-2 connected
[ 5.253] (II) NOUVEAU(G0): Using exact sizes for initial modes
[ 5.253] (II) NOUVEAU(G0): Output VGA-2 using initial mode 1024x768
[ 5.253] (II) NOUVEAU(G0): Using default gamma of (1.0, 1.0, 1.0) unless otherwise stated.
[ 5.253] (--) NOUVEAU(G0): Virtual size is 1440x900 (pitch 0)
[ 5.253] (**) NOUVEAU(G0): Driver mode "1024x768": 65.0 MHz (scaled from 0.0 MHz), 48.4 kHz, 60.0 Hz
[ 5.253] (II) NOUVEAU(G0): Modeline "1024x768"x60.0 65.00 1024 1048 1184 1344 768 771 777 806 -hsync -vsync (48.4 kHz eP)
[ 5.253] (**) NOUVEAU(G0): Driver mode "1024x768": 78.8 MHz (scaled from 0.0 MHz), 60.1 kHz, 75.1 Hz
[ 5.253] (II) NOUVEAU(G0): Modeline "1024x768"x75.1 78.80 1024 1040 1136 1312 768 769 772 800 +hsync +vsync (60.1 kHz e)
[ 5.253] (**) NOUVEAU(G0): Driver mode "1024x768": 75.0 MHz (scaled from 0.0 MHz), 56.5 kHz, 70.1 Hz
[ 5.253] (II) NOUVEAU(G0): Modeline "1024x768"x70.1 75.00 1024 1048 1184 1328 768 771 777 806 -hsync -vsync (56.5 kHz e)
[ 5.253] (**) NOUVEAU(G0): Driver mode "800x600": 50.0 MHz (scaled from 0.0 MHz), 48.1 kHz, 72.2 Hz
[ 5.253] (II) NOUVEAU(G0): Modeline "800x600"x72.2 50.00 800 856 976 1040 600 637 643 666 +hsync +vsync (48.1 kHz e)
[ 5.253] (**) NOUVEAU(G0): Driver mode "800x600": 49.5 MHz (scaled from 0.0 MHz), 46.9 kHz, 75.0 Hz
[ 5.253] (II) NOUVEAU(G0): Modeline "800x600"x75.0 49.50 800 816 896 1056 600 601 604 625 +hsync +vsync (46.9 kHz e)
[ 5.253] (**) NOUVEAU(G0): Driver mode "800x600": 40.0 MHz (scaled from 0.0 MHz), 37.9 kHz, 60.3 Hz
[ 5.253] (II) NOUVEAU(G0): Modeline "800x600"x60.3 40.00 800 840 968 1056 600 601 605 628 +hsync +vsync (37.9 kHz e)
[ 5.253] (**) NOUVEAU(G0): Driver mode "800x600": 36.0 MHz (scaled from 0.0 MHz), 35.2 kHz, 56.2 Hz
[ 5.253] (II) NOUVEAU(G0): Modeline "800x600"x56.2 36.00 800 824 896 1024 600 601 603 625 +hsync +vsync (35.2 kHz e)
[ 5.253] (**) NOUVEAU(G0): Driver mode "640x480": 31.5 MHz (scaled from 0.0 MHz), 37.9 kHz, 72.8 Hz
[ 5.253] (II) NOUVEAU(G0): Modeline "640x480"x72.8 31.50 640 664 704 832 480 489 491 520 -hsync -vsync (37.9 kHz e)
[ 5.253] (**) NOUVEAU(G0): Driver mode "640x480": 31.5 MHz (scaled from 0.0 MHz), 37.5 kHz, 75.0 Hz
[ 5.253] (II) NOUVEAU(G0): Modeline "640x480"x75.0 31.50 640 656 720 840 480 481 484 500 -hsync -vsync (37.5 kHz e)
[ 5.253] (**) NOUVEAU(G0): Driver mode "640x480": 25.2 MHz (scaled from 0.0 MHz), 31.5 kHz, 60.0 Hz
[ 5.253] (II) NOUVEAU(G0): Modeline "640x480"x60.0 25.20 640 656 752 800 480 490 492 525 -hsync -vsync (31.5 kHz e)
[ 5.253] (**) NOUVEAU(G0): Driver mode "720x400": 28.3 MHz (scaled from 0.0 MHz), 31.5 kHz, 70.1 Hz
[ 5.254] (II) NOUVEAU(G0): Modeline "720x400"x70.1 28.32 720 738 846 900 400 412 414 449 -hsync +vsync (31.5 kHz e)
[ 5.254] (==) NOUVEAU(G0): DPI set to (96, 96)
[ 5.254] (II) Loading sub module "fb"
[ 5.254] (II) LoadModule: "fb"
[ 5.254] (II) Loading /usr/lib/xorg/modules/libfb.so
[ 5.254] (II) Module fb: vendor="X.Org Foundation"
[ 5.254] compiled for 1.14.1, module version = 1.0.0
[ 5.254] ABI class: X.Org ANSI C Emulation, version 0.4
[ 5.254] (II) Loading sub module "exa"
[ 5.254] (II) LoadModule: "exa"
[ 5.254] (II) Loading /usr/lib/xorg/modules/libexa.so
[ 5.254] (II) Module exa: vendor="X.Org Foundation"
[ 5.254] compiled for 1.14.1, module version = 2.6.0
[ 5.254] ABI class: X.Org Video Driver, version 14.1
[ 5.254] (II) Loading sub module "shadowfb"
[ 5.254] (II) LoadModule: "shadowfb"
[ 5.254] (II) Loading /usr/lib/xorg/modules/libshadowfb.so
[ 5.254] (II) Module shadowfb: vendor="X.Org Foundation"
[ 5.254] compiled for 1.14.1, module version = 1.0.0
[ 5.254] ABI class: X.Org ANSI C Emulation, version 0.4
[ 5.254] (II) UnloadModule: "vesa"
[ 5.254] (II) Unloading vesa
[ 5.254] (--) Depth 24 pixmap format is 32 bpp
[ 5.255] (II) NOUVEAU(G0): Opened GPU channel 0
[ 5.261] (II) NOUVEAU(G0): [DRI2] Setup complete
[ 5.261] (II) NOUVEAU(G0): [DRI2] DRI driver: nouveau
[ 5.261] (II) NOUVEAU(G0): [DRI2] VDPAU driver: nouveau
[ 5.266] (II) EXA(256): Driver allocated offscreen pixmaps
[ 5.266] (II) EXA(256): Driver registered support for the following operations:
[ 5.266] (II) Solid
[ 5.266] (II) Copy
[ 5.266] (II) Composite (RENDER acceleration)
[ 5.266] (II) UploadToScreen
[ 5.266] (II) DownloadFromScreen
[ 5.266] (==) NOUVEAU(G0): Backing store disabled
[ 5.266] (==) NOUVEAU(G0): Silken mouse enabled
[ 5.267] (II) NOUVEAU(G0): [XvMC] Associated with Nouveau GeForce 8/9 Textured Video.
[ 5.267] (II) NOUVEAU(G0): [XvMC] Extension initialized.
[ 5.267] (==) NOUVEAU(G0): DPMS enabled
[ 5.267] (II) NOUVEAU(G0): RandR 1.2 enabled, ignore the following RandR disabled message.
[ 5.269] (II) NOUVEAU(0): Opened GPU channel 0
[ 5.273] (II) NOUVEAU(0): [DRI2] Setup complete
[ 5.273] (II) NOUVEAU(0): [DRI2] DRI driver: nouveau
[ 5.273] (II) NOUVEAU(0): [DRI2] VDPAU driver: nouveau
[ 5.276] (II) EXA(0): Driver allocated offscreen pixmaps
[ 5.276] (II) EXA(0): Driver registered support for the following operations:
[ 5.276] (II) Solid
[ 5.277] (II) Copy
[ 5.277] (II) Composite (RENDER acceleration)
[ 5.277] (II) UploadToScreen
[ 5.277] (II) DownloadFromScreen
[ 5.277] (==) NOUVEAU(0): Backing store disabled
[ 5.277] (==) NOUVEAU(0): Silken mouse enabled
[ 5.277] (II) NOUVEAU(0): [XvMC] Associated with NV40 texture adapter.
[ 5.277] (II) NOUVEAU(0): [XvMC] Extension initialized.
[ 5.277] (==) NOUVEAU(0): DPMS enabled
[ 5.277] (II) NOUVEAU(0): RandR 1.2 enabled, ignore the following RandR disabled message.
[ 5.277] (--) RandR disabled
[ 5.444] (II) AIGLX: enabled GLX_MESA_copy_sub_buffer
[ 5.444] (II) AIGLX: enabled GLX_INTEL_swap_event
[ 5.444] (II) AIGLX: enabled GLX_ARB_create_context
[ 5.444] (II) AIGLX: enabled GLX_ARB_create_context_profile
[ 5.445] (II) AIGLX: enabled GLX_EXT_create_context_es2_profile
[ 5.445] (II) AIGLX: enabled GLX_SGI_swap_control and GLX_MESA_swap_control
[ 5.445] (II) AIGLX: GLX_EXT_texture_from_pixmap backed by buffer objects
[ 5.447] (II) AIGLX: Loaded and initialized nouveau
[ 5.447] (II) GLX: Initialized DRI2 GL provider for screen 0
[ 5.456] (II) NOUVEAU(0): NVEnterVT is called.
[ 5.457] (II) NOUVEAU(0): Setting screen physical size to 381 x 238
[ 5.457] resize called 1440 900
[ 5.688] (II) config/udev: Adding input device Power Button (/dev/input/event1)
[ 5.688] (**) Power Button: Applying InputClass "evdev keyboard catchall"
[ 5.688] (II) LoadModule: "evdev"
[ 5.688] (II) Loading /usr/lib/xorg/modules/input/evdev_drv.so
[ 5.690] (II) Module evdev: vendor="X.Org Foundation"
[ 5.690] compiled for 1.14.0, module version = 2.8.0
[ 5.690] Module class: X.Org XInput Driver
[ 5.690] ABI class: X.Org XInput driver, version 19.1
[ 5.690] (II) Using input driver 'evdev' for 'Power Button'
[ 5.690] (**) Power Button: always reports core events
[ 5.690] (**) evdev: Power Button: Device: "/dev/input/event1"
[ 5.690] (--) evdev: Power Button: Vendor 0 Product 0x1
[ 5.690] (--) evdev: Power Button: Found keys
[ 5.690] (II) evdev: Power Button: Configuring as keyboard
[ 5.690] (**) Option "config_info" "udev:/sys/devices/LNXSYSTM:00/LNXPWRBN:00/input/input1/event1"
[ 5.690] (II) XINPUT: Adding extended input device "Power Button" (type: KEYBOARD, id 6)
[ 5.690] (**) Option "xkb_rules" "evdev"
[ 5.690] (**) Option "xkb_model" "evdev"
[ 5.690] (**) Option "xkb_layout" "us"
[ 5.771] (II) config/udev: Adding input device Power Button (/dev/input/event0)
[ 5.771] (**) Power Button: Applying InputClass "evdev keyboard catchall"
[ 5.771] (II) Using input driver 'evdev' for 'Power Button'
[ 5.771] (**) Power Button: always reports core events
[ 5.771] (**) evdev: Power Button: Device: "/dev/input/event0"
[ 5.771] (--) evdev: Power Button: Vendor 0 Product 0x1
[ 5.771] (--) evdev: Power Button: Found keys
[ 5.771] (II) evdev: Power Button: Configuring as keyboard
[ 5.771] (**) Option "config_info" "udev:/sys/devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0C:00/input/input0/event0"
[ 5.771] (II) XINPUT: Adding extended input device "Power Button" (type: KEYBOARD, id 7)
[ 5.771] (**) Option "xkb_rules" "evdev"
[ 5.771] (**) Option "xkb_model" "evdev"
[ 5.771] (**) Option "xkb_layout" "us"
[ 5.772] (II) config/udev: Adding input device Lite-On Technology Corp. USB Keyboard (/dev/input/event2)
[ 5.772] (**) Lite-On Technology Corp. USB Keyboard: Applying InputClass "evdev keyboard catchall"
[ 5.772] (II) Using input driver 'evdev' for 'Lite-On Technology Corp. USB Keyboard'
[ 5.772] (**) Lite-On Technology Corp. USB Keyboard: always reports core events
[ 5.772] (**) evdev: Lite-On Technology Corp. USB Keyboard: Device: "/dev/input/event2"
[ 5.772] (--) evdev: Lite-On Technology Corp. USB Keyboard: Vendor 0x4ca Product 0x4b
[ 5.772] (--) evdev: Lite-On Technology Corp. USB Keyboard: Found keys
[ 5.772] (II) evdev: Lite-On Technology Corp. USB Keyboard: Configuring as keyboard
[ 5.772] (**) Option "config_info" "udev:/sys/devices/pci0000:00/0000:00:02.0/usb2/2-2/2-2:1.0/input/input2/event2"
[ 5.772] (II) XINPUT: Adding extended input device "Lite-On Technology Corp. USB Keyboard" (type: KEYBOARD, id 8)
[ 5.772] (**) Option "xkb_rules" "evdev"
[ 5.772] (**) Option "xkb_model" "evdev"
[ 5.772] (**) Option "xkb_layout" "us"
[ 5.772] (II) config/udev: Adding input device Lite-On Technology Corp. USB Keyboard (/dev/input/event3)
[ 5.772] (**) Lite-On Technology Corp. USB Keyboard: Applying InputClass "evdev keyboard catchall"
[ 5.772] (II) Using input driver 'evdev' for 'Lite-On Technology Corp. USB Keyboard'
[ 5.772] (**) Lite-On Technology Corp. USB Keyboard: always reports core events
[ 5.772] (**) evdev: Lite-On Technology Corp. USB Keyboard: Device: "/dev/input/event3"
[ 5.772] (--) evdev: Lite-On Technology Corp. USB Keyboard: Vendor 0x4ca Product 0x4b
[ 5.773] (--) evdev: Lite-On Technology Corp. USB Keyboard: Found 1 mouse buttons
[ 5.773] (--) evdev: Lite-On Technology Corp. USB Keyboard: Found scroll wheel(s)
[ 5.773] (--) evdev: Lite-On Technology Corp. USB Keyboard: Found relative axes
[ 5.773] (II) evdev: Lite-On Technology Corp. USB Keyboard: Forcing relative x/y axes to exist.
[ 5.773] (--) evdev: Lite-On Technology Corp. USB Keyboard: Found absolute axes
[ 5.773] (II) evdev: Lite-On Technology Corp. USB Keyboard: Forcing absolute x/y axes to exist.
[ 5.773] (--) evdev: Lite-On Technology Corp. USB Keyboard: Found keys
[ 5.773] (II) evdev: Lite-On Technology Corp. USB Keyboard: Configuring as mouse
[ 5.773] (II) evdev: Lite-On Technology Corp. USB Keyboard: Configuring as keyboard
[ 5.773] (II) evdev: Lite-On Technology Corp. USB Keyboard: Adding scrollwheel support
[ 5.773] (**) evdev: Lite-On Technology Corp. USB Keyboard: YAxisMapping: buttons 4 and 5
[ 5.773] (**) evdev: Lite-On Technology Corp. USB Keyboard: EmulateWheelButton: 4, EmulateWheelInertia: 10, EmulateWheelTimeout: 200
[ 5.773] (**) Option "config_info" "udev:/sys/devices/pci0000:00/0000:00:02.0/usb2/2-2/2-2:1.1/input/input3/event3"
[ 5.773] (II) XINPUT: Adding extended input device "Lite-On Technology Corp. USB Keyboard" (type: KEYBOARD, id 9)
[ 5.773] (**) Option "xkb_rules" "evdev"
[ 5.773] (**) Option "xkb_model" "evdev"
[ 5.773] (**) Option "xkb_layout" "us"
[ 5.776] (II) evdev: Lite-On Technology Corp. USB Keyboard: initialized for relative axes.
[ 5.776] (WW) evdev: Lite-On Technology Corp. USB Keyboard: ignoring absolute axes.
[ 5.777] (**) Lite-On Technology Corp. USB Keyboard: (accel) keeping acceleration scheme 1
[ 5.777] (**) Lite-On Technology Corp. USB Keyboard: (accel) acceleration profile 0
[ 5.777] (**) Lite-On Technology Corp. USB Keyboard: (accel) acceleration factor: 2.000
[ 5.777] (**) Lite-On Technology Corp. USB Keyboard: (accel) acceleration threshold: 4
[ 5.777] (II) config/udev: Adding input device USB Optical Mouse (/dev/input/event4)
[ 5.777] (**) USB Optical Mouse: Applying InputClass "evdev pointer catchall"
[ 5.777] (II) Using input driver 'evdev' for 'USB Optical Mouse'
[ 5.777] (**) USB Optical Mouse: always reports core events
[ 5.777] (**) evdev: USB Optical Mouse: Device: "/dev/input/event4"
[ 5.777] (--) evdev: USB Optical Mouse: Vendor 0x461 Product 0x4d20
[ 5.777] (--) evdev: USB Optical Mouse: Found 3 mouse buttons
[ 5.777] (--) evdev: USB Optical Mouse: Found scroll wheel(s)
[ 5.777] (--) evdev: USB Optical Mouse: Found relative axes
[ 5.777] (--) evdev: USB Optical Mouse: Found x and y relative axes
[ 5.777] (II) evdev: USB Optical Mouse: Configuring as mouse
[ 5.777] (II) evdev: USB Optical Mouse: Adding scrollwheel support
[ 5.777] (**) evdev: USB Optical Mouse: YAxisMapping: buttons 4 and 5
[ 5.777] (**) evdev: USB Optical Mouse: EmulateWheelButton: 4, EmulateWheelInertia: 10, EmulateWheelTimeout: 200
[ 5.777] (**) Option "config_info" "udev:/sys/devices/pci0000:00/0000:00:02.0/usb2/2-3/2-3:1.0/input/input4/event4"
[ 5.777] (II) XINPUT: Adding extended input device "USB Optical Mouse" (type: MOUSE, id 10)
[ 5.777] (II) evdev: USB Optical Mouse: initialized for relative axes.
[ 5.778] (**) USB Optical Mouse: (accel) keeping acceleration scheme 1
[ 5.778] (**) USB Optical Mouse: (accel) acceleration profile 0
[ 5.778] (**) USB Optical Mouse: (accel) acceleration factor: 2.000
[ 5.778] (**) USB Optical Mouse: (accel) acceleration threshold: 4
[ 5.778] (II) config/udev: Adding input device USB Optical Mouse (/dev/input/mouse0)
[ 5.778] (II) No input driver specified, ignoring this device.
[ 5.778] (II) This device may have been added with another device file.
[ 5.778] (II) config/udev: Adding drm device (/dev/dri/card1)
[ 5.778] (II) config/udev: Adding drm device (/dev/dri/card0)
[ 5.779] (II) config/udev: Adding input device PC Speaker (/dev/input/event5)
[ 5.779] (II) No input driver specified, ignoring this device.
[ 5.779] (II) This device may have been added with another device file.
[ 7.250] (II) config/udev: Adding input device HDA Digital PCBeep (/dev/input/event6)
[ 7.250] (II) No input driver specified, ignoring this device.
[ 7.250] (II) This device may have been added with another device file.
[ 7.252] (II) config/udev: Adding input device HDA NVidia Line (/dev/input/event7)
[ 7.252] (II) No input driver specified, ignoring this device.
[ 7.252] (II) This device may have been added with another device file.
[ 7.254] (II) config/udev: Adding input device HDA NVidia Front Mic (/dev/input/event8)
[ 7.254] (II) No input driver specified, ignoring this device.
[ 7.254] (II) This device may have been added with another device file.
[ 7.256] (II) config/udev: Adding input device HDA NVidia Rear Mic (/dev/input/event9)
[ 7.256] (II) No input driver specified, ignoring this device.
[ 7.256] (II) This device may have been added with another device file.
[ 7.258] (II) config/udev: Adding input device HDA NVidia Front Headphone (/dev/input/event10)
[ 7.258] (II) No input driver specified, ignoring this device.
[ 7.258] (II) This device may have been added with another device file.
[ 7.260] (II) config/udev: Adding input device HDA NVidia Line Out (/dev/input/event11)
[ 7.260] (II) No input driver specified, ignoring this device.
[ 7.260] (II) This device may have been added with another device file.
[ 7.270] (II) config/udev: Adding input device HDA NVidia HDMI/DP,pcm=9 (/dev/input/event12)
[ 7.270] (II) No input driver specified, ignoring this device.
[ 7.270] (II) This device may have been added with another device file.
[ 7.272] (II) config/udev: Adding input device HDA NVidia HDMI/DP,pcm=8 (/dev/input/event13)
[ 7.272] (II) No input driver specified, ignoring this device.
[ 7.272] (II) This device may have been added with another device file.
[ 7.274] (II) config/udev: Adding input device HDA NVidia HDMI/DP,pcm=7 (/dev/input/event14)
[ 7.274] (II) No input driver specified, ignoring this device.
[ 7.274] (II) This device may have been added with another device file.
[ 7.289] (II) config/udev: Adding input device HDA NVidia HDMI/DP,pcm=3 (/dev/input/event15)
[ 7.289] (II) No input driver specified, ignoring this device.
[ 7.289] (II) This device may have been added with another device file.
[ 16.144] (II) NOUVEAU(0): EDID vendor "HSD", prod id 9231
[ 16.144] (II) NOUVEAU(0): Using EDID range info for horizontal sync
[ 16.144] (II) NOUVEAU(0): Using EDID range info for vertical refresh
[ 16.144] (II) NOUVEAU(0): Printing DDC gathered Modelines:
[ 16.145] (II) NOUVEAU(0): Modeline "1440x900"x0.0 106.50 1440 1520 1672 1904 900 903 909 934 -hsync +vsync (55.9 kHz eP)
[ 16.145] (II) NOUVEAU(0): Modeline "800x600"x0.0 40.00 800 840 968 1056 600 601 605 628 +hsync +vsync (37.9 kHz e)
[ 16.145] (II) NOUVEAU(0): Modeline "800x600"x0.0 36.00 800 824 896 1024 600 601 603 625 +hsync +vsync (35.2 kHz e)
[ 16.145] (II) NOUVEAU(0): Modeline "640x480"x0.0 31.50 640 656 720 840 480 481 484 500 -hsync -vsync (37.5 kHz e)
[ 16.145] (II) NOUVEAU(0): Modeline "640x480"x0.0 31.50 640 664 704 832 480 489 492 520 -hsync -vsync (37.9 kHz e)
[ 16.145] (II) NOUVEAU(0): Modeline "640x480"x0.0 30.24 640 704 768 864 480 483 486 525 -hsync -vsync (35.0 kHz e)
[ 16.145] (II) NOUVEAU(0): Modeline "640x480"x0.0 25.18 640 656 752 800 480 490 492 525 -hsync -vsync (31.5 kHz e)
[ 16.145] (II) NOUVEAU(0): Modeline "720x400"x0.0 28.32 720 738 846 900 400 412 414 449 -hsync +vsync (31.5 kHz e)
[ 16.145] (II) NOUVEAU(0): Modeline "1024x768"x0.0 78.75 1024 1040 1136 1312 768 769 772 800 +hsync +vsync (60.0 kHz e)
[ 16.145] (II) NOUVEAU(0): Modeline "1024x768"x0.0 75.00 1024 1048 1184 1328 768 771 777 806 -hsync -vsync (56.5 kHz e)
[ 16.145] (II) NOUVEAU(0): Modeline "1024x768"x0.0 65.00 1024 1048 1184 1344 768 771 777 806 -hsync -vsync (48.4 kHz e)
[ 16.145] (II) NOUVEAU(0): Modeline "832x624"x0.0 57.28 832 864 928 1152 624 625 628 667 -hsync -vsync (49.7 kHz e)
[ 16.145] (II) NOUVEAU(0): Modeline "800x600"x0.0 49.50 800 816 896 1056 600 601 604 625 +hsync +vsync (46.9 kHz e)
[ 16.145] (II) NOUVEAU(0): Modeline "800x600"x0.0 50.00 800 856 976 1040 600 637 643 666 +hsync +vsync (48.1 kHz e)
[ 16.145] (II) NOUVEAU(0): Modeline "1152x864"x0.0 108.00 1152 1216 1344 1600 864 865 868 900 +hsync +vsync (67.5 kHz e)
[ 16.145] (II) NOUVEAU(0): Modeline "1440x900"x0.0 136.75 1440 1536 1688 1936 900 903 909 942 -hsync +vsync (70.6 kHz e)
[ 16.145] (II) NOUVEAU(0): Modeline "1400x1050"x0.0 121.75 1400 1488 1632 1864 1050 1053 1057 1089 -hsync +vsync (65.3 kHz e)
[ 16.145] (II) NOUVEAU(0): Modeline "1280x1024"x0.0 108.00 1280 1328 1440 1688 1024 1025 1028 1066 +hsync +vsync (64.0 kHz e)
[ 16.145] (II) NOUVEAU(0): Modeline "1280x960"x0.0 108.00 1280 1376 1488 1800 960 961 964 1000 +hsync +vsync (60.0 kHz e)
[ 16.145] (II) NOUVEAU(0): Modeline "1280x720"x60.0 74.48 1280 1336 1472 1664 720 721 724 746 -hsync +vsync (44.8 kHz e)
[ 16.145] (II) NOUVEAU(0): Modeline "1024x768"x66.0 71.63 1024 1080 1192 1360 768 769 772 798 -hsync +vsync (52.7 kHz e)
[ 16.979] (II) NOUVEAU(0): EDID vendor "HSD", prod id 9231
[ 16.979] (II) NOUVEAU(0): Using hsync ranges from config file
[ 16.979] (II) NOUVEAU(0): Using vrefresh ranges from config file
[ 16.979] (II) NOUVEAU(0): Printing DDC gathered Modelines:
[ 16.979] (II) NOUVEAU(0): Modeline "1440x900"x0.0 106.50 1440 1520 1672 1904 900 903 909 934 -hsync +vsync (55.9 kHz eP)
[ 16.979] (II) NOUVEAU(0): Modeline "800x600"x0.0 40.00 800 840 968 1056 600 601 605 628 +hsync +vsync (37.9 kHz e)
[ 16.979] (II) NOUVEAU(0): Modeline "800x600"x0.0 36.00 800 824 896 1024 600 601 603 625 +hsync +vsync (35.2 kHz e)
[ 16.979] (II) NOUVEAU(0): Modeline "640x480"x0.0 31.50 640 656 720 840 480 481 484 500 -hsync -vsync (37.5 kHz e)
[ 16.979] (II) NOUVEAU(0): Modeline "640x480"x0.0 31.50 640 664 704 832 480 489 492 520 -hsync -vsync (37.9 kHz e)
[ 16.979] (II) NOUVEAU(0): Modeline "640x480"x0.0 30.24 640 704 768 864 480 483 486 525 -hsync -vsync (35.0 kHz e)
[ 16.979] (II) NOUVEAU(0): Modeline "640x480"x0.0 25.18 640 656 752 800 480 490 492 525 -hsync -vsync (31.5 kHz e)
[ 16.979] (II) NOUVEAU(0): Modeline "720x400"x0.0 28.32 720 738 846 900 400 412 414 449 -hsync +vsync (31.5 kHz e)
[ 16.979] (II) NOUVEAU(0): Modeline "1024x768"x0.0 78.75 1024 1040 1136 1312 768 769 772 800 +hsync +vsync (60.0 kHz e)
[ 16.979] (II) NOUVEAU(0): Modeline "1024x768"x0.0 75.00 1024 1048 1184 1328 768 771 777 806 -hsync -vsync (56.5 kHz e)
[ 16.979] (II) NOUVEAU(0): Modeline "1024x768"x0.0 65.00 1024 1048 1184 1344 768 771 777 806 -hsync -vsync (48.4 kHz e)
[ 16.979] (II) NOUVEAU(0): Modeline "832x624"x0.0 57.28 832 864 928 1152 624 625 628 667 -hsync -vsync (49.7 kHz e)
[ 16.979] (II) NOUVEAU(0): Modeline "800x600"x0.0 49.50 800 816 896 1056 600 601 604 625 +hsync +vsync (46.9 kHz e)
[ 16.979] (II) NOUVEAU(0): Modeline "800x600"x0.0 50.00 800 856 976 1040 600 637 643 666 +hsync +vsync (48.1 kHz e)
[ 16.979] (II) NOUVEAU(0): Modeline "1152x864"x0.0 108.00 1152 1216 1344 1600 864 865 868 900 +hsync +vsync (67.5 kHz e)
[ 16.979] (II) NOUVEAU(0): Modeline "1440x900"x0.0 136.75 1440 1536 1688 1936 900 903 909 942 -hsync +vsync (70.6 kHz e)
[ 16.979] (II) NOUVEAU(0): Modeline "1400x1050"x0.0 121.75 1400 1488 1632 1864 1050 1053 1057 1089 -hsync +vsync (65.3 kHz e)
[ 16.979] (II) NOUVEAU(0): Modeline "1280x1024"x0.0 108.00 1280 1328 1440 1688 1024 1025 1028 1066 +hsync +vsync (64.0 kHz e)
[ 16.979] (II) NOUVEAU(0): Modeline "1280x960"x0.0 108.00 1280 1376 1488 1800 960 961 964 1000 +hsync +vsync (60.0 kHz e)
[ 16.979] (II) NOUVEAU(0): Modeline "1280x720"x60.0 74.48 1280 1336 1472 1664 720 721 724 746 -hsync +vsync (44.8 kHz e)
[ 16.982] (II) NOUVEAU(0): Modeline "1024x768"x66.0 71.63 1024 1080 1192 1360 768 769 772 798 -hsync +vsync (52.7 kHz e)
[ 16.984] resize called 1440 900 -
Startup gets 'Network cable unplugged' on mini-PCI wireless card
I recently installed a Netgear DG834GT wireless router and now have an intermittent problem connecting my Tecra 9100 to it. If the 9100 has been shutdown for a while (like overnight), when I restart I always get 'Network cable unplugged' for the wireless connection. Rebooting a number of times (anything from 3 upwards) I eventually get connected to the router and all then works fine for hours. Even a quick restart at this point (i.e. once the wireless card has connected) does not cause a problem but as soon as I leave the machine shutdown for a length of time it fails again at reboot.
There are no errors in the Event log.
I am using the built in mini-PCI wireless card and have already upgraded to the latest driver.
Any ideas gratefully recieved, at the moment each morning is a 20-30 minute frustration of rebooting trying to get my connection working.
(Running Win2K Professional)Checking other boards for help (Netgear etc.) it seems that the 'Network cable unplugged' is a common message when wireless connectivity is failing. However, to prove the point, I have disabled the other LAN card (for which I was also getting 'network cable unplugged' but as expected since it was). I still get the same issue with the wireless card, although now the reboots are slightly more predictable - it normally seems to succeed on the third reboot. I guess disabling the other card has changed the startup timing slightly and in that way made things slightly better.
Again, any other suggestions gratefully received. As this seems to be a timing issue at startup, I am suspicious that one of the other things that runs at that time is causing the problem. -
Startup gets 'Network cable unplugged' on mini-PCI wireless card (again)
Reposting as previous topic has been locked although has not been resolved. Original post below, please see previous post for more details
I recently installed a Netgear DG834GT wireless router and now have an intermittent problem connecting my Tecra 9100 to it. If the 9100 has been shutdown for a while (like overnight), when I restart I always get 'Network cable unplugged' for the wireless connection. Rebooting a number of times (anything from 3 upwards) I eventually get connected to the router and all then works fine for hours. Even a quick restart at this point (i.e. once the wireless card has connected) does not cause a problem but as soon as I leave the machine shutdown for a length of time it fails again at reboot.
There are no errors in the Event log.
I am using the built in mini-PCI wireless card and have already upgraded to the latest driver.
Any ideas gratefully recieved, at the moment each morning is a 20-30 minute frustration of rebooting trying to get my connection working.
(Running Win2K Professional)More info : I have found that this is time related rather than related to the number of reboots. It always fails on the first reboot after being shut down for a period of time. At this point, however long I wait the connection never comes up. However, if I wait a few minutes and then reboot, the second reboot will always successfully establish the connection.
On this basis, the problem has become slightly less annoying as I have a workaround - boot once, wait a few minutes and reboot. That being said, any information on how I can isolate this further (e.g. tracing what is running at startup) would be gratefully recieved.
Maybe you are looking for
-
TO not printing in background processing of process message
Dear Experts, We are using PI sheets and process messages to do GR (WM) and then put away to a destination storage bin. TO is getting printed in the default user profile printer when user is manually sending process message in CO54. But not getting
-
After startup my iMac's screen turns black
My iMac start ups normal. I hear the chime, followed by the apple logo and gears. Then the screen goes black but you can still see the cursor clear as day. I can also turn the brightness up and down, but it is still black. Is there anything I can do
-
Can I "Lock" Photoshop CS3 and Bridge Together ?
I like to have Photoshop and Bridge open together. However, every time I click on the Bridge interface, either accidentally or to reposition it etc. Photoshop vanishes and I have to bring it back. Whilst it is not a terrible malfunction it is irritat
-
Satellite A200-23P - Upgrade to Windows 7
Approximately 2 years ago I bought Toshiba notebook Satellite A200-23P with Windows Vista perinstalled. Now I want upgrade to Windows 7. I download Windows 7 Upgrade Advisor, it wrote me that: 1) More info from TOSHIBA TOSHIBA has a website that migh
-
Exporting videos to Ipod format qith QuickTime Pro
Hey guys, i just recently bought an Ipod Video, and i use Quicktime Pro to convert videos to ipod format for it. My problem is that the converted video (M4V) never has any audio. Wheather i try listening to is on my computer or on the ipod, no audio