G4 Powerbook lid is creaky and very hard to open/close... what to do?

My wife's G4 1.67Ghz Powerbook was running great until a few days ago. The latch at the bottom isn't catching and now the lid is becoming difficult to open and close. It's very creaky and is almost pulling the screen off the aluminum casing around it. We're afraid to close and open it now for fear the screen will be damaged.
Is this a hinge thing? I'm trying to figure out if the hinges are broken or just need adjusting.
Anyone else have this problem at all?
I love this Powerbook and it's been solid since the day we got it. However, I don't want to spend a lot to fix it either (I've heard of hinges costing a lot). If I have to spend lots on it, I might as well upgrade the unit.
TIA,
Dale

Dale Thompson wrote:
Thanks for the input though, I checked out the ifixit website, good to know how to do it completely.
Nice also to see the low price (one tenth of the Titanium hinges) for the replacements.  One thing that I did as a stop-gap with the TiBook was to get a WD-40 no-mess pen and daub the hinges carefully, then sop up the excess with a cotton swab. 
It helped for a while but didn't solve the ultimate problem, which is that the TiBook hinges were made out of flipping Aluminum!  The steel replacements from PowerbookMedic.com seemed to be a good, albeit expensive choice and were relatively easy to install.
Ah, the hazards of becoming overly attached to a laptop.

Similar Messages

  • We have a web.mail system at our university based on Outlook, it has worked fine until upgraded to 8.01 the attachments always comes in ashx format (instead of word , pp pdf or whatever and are hard to open. If I use Safari instead everything is ok

    We have web.mail system at our university based on Outlook, it has worked fine until upgraded to 8.01 the attachments always comes in ashx format (instead of word , pp pdf or whatever and are hard to open. If I use Safari instead everything is ok edit

    Outlook Web Access sends an illegal Content-Dispositon header to Firefox. This is no longer allowed in Firefox 8. Firefox 9 will have a workaround for this so that Microsoft has time to fix their software.<br>
    See http://support.mozilla.com/nl/questions/895024<br>
    https://support.mozilla.com/en-US/search?q=attachement.ashx<br>
    Bug 704989 - add workaround for broken Outlook Web App (OWA) attachment handling <br>

  • Have FF 3.1.6...less cumbersom. Lately it's been freezing up and is VERY slow to open. What's up with that?

    Have FireFox 3.1.6...less cumbersome. Lately it's been freezing up (can't close page without using Ctrl, Alt, Delete) and it is VERY slow to open. What's up with that?
    Have made no system changes. Have Avast for antivirus,. which updates itself regularly.
    Run Sys Defrag a few times a week. Don't know what else to do other than uninstall and reinstall.
    OS = XP Home

    MacAficionadodel90 wrote:
    ... Is there a way I can go back to 5.11?
    Sorry downgrading is not supported by Apple.
    MacAficionadodel90 wrote:
    ... Now my iPad starts up  slower...runs slower...
    Try This...
    Close All Open Apps...  Perform a Reset... Try again...
    Reset  ( No Data will be Lost )
    Press and hold the Sleep/Wake button and the Home button at the same time for at least ten seconds, until the Apple logo appears. Release the Buttons.
    http://support.apple.com/kb/ht1430
    If no joy...
    Connect to iTunes on the computer you usually Sync with and “ Restore “... either from Backup or as New...
    http://support.apple.com/kb/HT1414
    Also consider Deleting any Apps you have Purchased / Downloaded but you now never use..

  • [OBIEE10.3.3] Box and Whisker / High, Low, Open Close

    Hi,
    For a demo project I'm looking for a Box and Whisker / High Low Open Close chart. It doesn't seem to be available in the default installation. Does anybody know were I can find one?
    Best Regards
    John

    Thats very tough to do in OBIEE.

  • Hi everybody.. i have a problem nad i need help a.s.a.p ... i forgut my ipad passcode and tryed to remember it tell it locked and i cant get open .. it says connect to itunes .. i did that and its still not opening? what can i do? thanks

    hi everybody.. i have a problem nad i need help a.s.a.p ... i forgut my ipad passcode and tryed to remember it tell it locked and i cant get open .. it says connect to itunes .. i did that and its still not opening? what can i do? thanks

    http://support.apple.com/kb/HT1808
    Regards.

  • My daughter was fooling around in settings and now her ipod is locked and her code wont open it what can we do

    My daughter was fooling around with the settings and now her ipod is locked and her code wont open it . what can we do

    Forgotten Screen-Lock Passcode
    Connect the iOS device to your computer and try to make a backup
    iOS: How to back up
    Then restore via iTunes. The iOS device will be erased. Place the iOS device in Recovery Mode if necessary to allow the restore.
    If recovery mode does not work try DFU mode.
    How to put iPod touch / iPhone into DFU mode « Karthik's scribblings
    For how to restore:
    iTunes: Restoring iOS software
    To restore from backup see:
    iOS: Back up and restore your iOS device with iCloud or iTunes
    If you restore from iCloud backup the apps will be automatically downloaded. If you restore from iTunes backup the apps and music have to be in the iTunes library since synced media like apps and music are not included in the backup of the iOS device that iTunes makes.
    You can redownload most iTunes purchases by:
    Downloading past purchases from the App Store, iBookstore, and iTunes Store    

  • My Creative Cloud icon is suddenly turned grey and I can not open it, what shall I do?

    My Creative Cloud icon is suddenly turned grey and I can not open it, what shall I do? Shall I uninstall and reinstall Creative Cloud?
    I have a stationary Mac (a bit old).
    Thank you in advance.

    Hello, it is a stationary Mac OS X, version 10.7.5
    Adelheid
    Fra: Jeff A Wright <[email protected]<mailto:[email protected]>>
    Svar til: "[email protected]<mailto:[email protected]>" <[email protected]<mailto:[email protected]>>
    Dato: Monday, February 2, 2015 8:08 PM
    Til: Adelheid Ottesen <[email protected]<mailto:[email protected]>>
    Emne:  My Creative Cloud icon is suddenly turned grey and I can not open it, what shall I do?
    My Creative Cloud icon is suddenly turned grey and I can not open it, what shall I do?
    created by Jeff A Wright<https://forums.adobe.com/people/JeffAWright> in Creative Cloud Download & Install - View the full discussion<https://forums.adobe.com/message/7154587#7154587>

  • TS1538 i update my mobile and it didn't open again what can i do?

    i update my iphone and it didn't open again what can i do ?

    Go to ITunes/Edit/Preferences/Devices and see if your backup is still listed with the time stamp from before the update. If yes, use this backup to restore from after you connected in recovery mode to restore, explained here:
    iOS: Unable to update or restore

  • I reset my password and now I cannot open Itunes, what do I do?

    I reset my password and now I cannot open Itunes, what do I do?

    The program does not open, I am using Vista.  I just went through repair and it started several days ago after a year of not working.  Now I am back to the same problem

  • I just updated to the newest version of Firefox and now none of my themes work. It's just all white and very hard to see.

    I have windows XP, just updated to the newest version and not none of my themes work. It's just all white for my tabs and tool bar. Very hard to see. I've reinstalled the themes and nothing works.
    Any ideas?

    You can try to disable hardware acceleration in Firefox.
    *Tools > Options > Advanced > General > Browsing: "Use hardware acceleration when available"
    You need to close and restart Firefox after toggling this setting.
    *https://support.mozilla.org/kb/Troubleshooting+extensions+and+themes
    *https://support.mozilla.org/kb/upgrade-graphics-drivers-use-hardware-acceleration

  • I hated 4.0, so I reinstalled 3.6 and it won't open. What do I do now?

    I uninstalled 4.0 and reinstalled 3.6 using there instructions from your forum...
    If you still want to downgrade to Firefox 3.6.* you can uninstall Firefox 4, but do not select the option to "Remove my Firefox personal data". If you select that option it will delete your bookmarks, passwords and other user data.
    You can then install Firefox 3.6.* available from http://www.mozilla.com/en-US/firefox/all-older.html - it will automatically use your current bookmarks, passwords etc.
    To avoid possible problems with downgrading, I recommend going to your profile folder and deleting the following files if they exist - extensions.cache, extensions.rdf, extensions.ini, extensions.sqlite and localstore.rdf. Deleting these files will force Firefox to rebuild the list of installed extensions, checking their compatibility, and reset toolbar customizations.
    For details of how to find your profile folder see https://support.mozilla.com/kb/Profile
    The reinstall of 3.6 won't open. What do I do now???

    The directions you posted look good to me, though I would not have deleted the files, there is no harm, Firefox will recreate them.
    I expect that you have an extension that is bad probably one bad enough to be listed in
    * [http://kb.mozillazine.org/Problematic_extensions Problematic extensions - MozillaZine Knowledge Base]
    or listed in the blocklist
    * [https://www.mozilla.com/blocklist/ Add-ons Blocklist | Mozilla]
    I would suggest going back to Firefox 4.0.1 and trying to fix your problems there. In either case you will need to open in Firefox Safe Mode, see [http://kb.mozillazine.org/Safe_Mode Safe Mode - MozillaZine Knowledge Base] which will disable extensions and I would expect that you would be able to run Firefox that way. If you can run okay only in Safe Mode then that almost certain means an extension problem.
    If you can use menus but not use "Enter" on the location bar that proably points to
    "AVG Safe Search" extension and you would have to follow directions in Problematic extensions to reinstall AVG Free without the Link Scanner Component. If you can't easily identify the extension causing problems then see
    * Extension issues in [http://kb.mozillazine.org/Standard_diagnostic_(Firefox)#Extension_issues Standard diagnostic - Firefox - MozillaZine Knowledge Base]
    Firefox 4.0 is not a problem you thought it was, since you can customize the appearance.
    You can make Firefox 4.0.1 look like Firefox 3.6.17, see numbered items 1-10 in the following topic [http://dmcritchie.mvps.org/firefox/firefox-
    problems.htm#fx4interface Fix Firefox 4.0 toolbar user interface, problems (Make Firefox 4.0 look like 3.6)]

  • I keep getting a "Your Firefox profile cannot be loaded. It may be missing or inaccessible" message and firefox does not open. WHat is wrong and how do I fix?

    I uninstalled Firefox from my computer, then I reinstalled it and tried to run it, but this message appeared, "Your Firefox profile cannot be loaded. It may be missing or inaccessible" and Firefox does not open at all.

    hello davidrusso71, press windows-key+R on your computer and open ''%appdata%\Mozilla\'' - an explorer window should come up, in there rename the folder labelled "Firefox" to something like oldFirefox. on the next start of firefox this should lead to a new profile being created...
    you might want to import some of your old data into the new profile afterwards: [[Recovering important data from an old profile]]

  • Trying to update ipad2 and error is can open url what do I do

    trying to update ipad2 get error can not open URL what do I do

    Try a reset and see if it resumes loading after the iPad has restarted (I assume that you are connected to a network) : press and hold both the sleep and home buttons for about 10 to 15 seconds (ignore the red slider), after which the Apple logo should appear - you won't lose any content, it's the iPad equivalent of a reboot.
    If that doesn't work then you could try syncing it from you computer's iTunes, or dragging and dropping it from iTunes onto the iPad device

  • Screen shows image, but is very bright white, and very hard to see.

    hello, i have a 4gen nano with a screen that is a bright white most of the time, with a barely visible display. i can see enough to navigate where i want to go, but is is very difficult. on rare occasions the screen returns to normal, randomly, but returns to its white condition soon after. any ideas on what is causing this would be very helpful. thank you

    try shutting down and doing SMC reset, the following article tells how to do this:
    http://support.apple.com/kb/HT3964
    also try PRAM reset, the following article tells how to do that:
    http://support.apple.com/kb/HT1379
    if still having issues after doing these 2 resets i would take the mac to apple store or service provider to have it looked at. the following link helps you find one close to you:
    https://locate.apple.com

  • Blurry and flickering screen on my ipod nano very hard to read. What do I do?

    My ipod nano 5th generation screen is so blurry and flickering that I can hardly read the menu. I can't see when I am taking photos or videos, but the ipod is working well otherwise. An suggestions???
    Thanks

    Hi alangium,
    Welcome to the Support Communities!
    Resetting your computer's PRAM should restore your Macbook Pro's screen appearance.
    OS X Mavericks: Reset your computer’s PRAM
    http://support.apple.com/kb/ph14222
    This article may provide some information about your Mini DisplayPort to AVI adapter.  Have you tried to connect a different VGA monitor to your Macbook to see if you get the same results?
    Apple Mini DisplayPort adapters: Frequently asked questions (FAQ)
    http://support.apple.com/kb/HT3382
    18. What is the maximum resolution available for use with the Apple Mini DisplayPort to VGA adapter?
    The resolution available with the Apple Mini DisplayPort to VGA Adapter is 1920 x 1200. VGA displays that use higher refresh rates (such as 85 Hz) at resolutions of 1600 x 1200 or greater may not generate video properly until you lower the refresh rate.
    Apple computers: Troubleshooting issues with video on internal or external displays
    http://support.apple.com/kb/HT1573#5
    How can I detect displays?
    If the detect displays option is not available, hold down the Option key while you are in the Display pane.
    How do I select additional resolutions on my display?
    You can use the Display pane of System Preferences to specify how your display works. Not all options appear for all display models. By default the best resolution for your display will already be selected in System Preferences.
    To select a different resolution, use the Scaled option. Some additional resolutions may be available when you hold the Option button.
    I hope this information helps ....
    - Judy

Maybe you are looking for

  • Can I stream music to apple tv and airport express at the same time?

    Does anyone know if I can stream music to both AppleTV and Airport Express (speakers) at the same time? I have a TV in my living room and external speakers on my deck and want to stream music to both at the same time so I have the same music playing

  • VPRS in billing is not matching PGI document

    Short Text     VPRS value differs in billing and PGI documents     Long Text     Hi, Please be Informed that the value of the cost (VPRS) in the billing document is different from the value in the post goods issue document. In which Cases Sales order

  • Action for click in table like in value help design since SP11

    Hi everybody, since SP11 with the new value helps (F4) design, you can click everywhere in the table of the search result table, to select and use one hit. Now I want to create a table with this behaviour and layout, too. Is it possible in a table, n

  • Report to view composite  and master role changes

    Dear All, i would like to know list of master role and composite role changes, i searched in SUIM for change document for roles,which gives all role changes, which is not solving the pupose.my requirement is past perticular period any composite role

  • Not able to print notes. Anyone?

    In PAGES 5: Notes now appear in popups which make them look good but hard to get an overview. Printing them is impossible. Any suggestions?