G4 problems with Westinghouse monitor
My husband just bought a Westinghouse 17" monitor(LCM-17w7) to hook up to his G4 mac last night.
He hooked it up and since then, we cannot get the computer to shut down. when you click shut down, the computer restarts. He could never get it to shut down, so he ended up unplugging it (a big no-no). He went to start it up again this morning, and it would not. His stepfather told him to reset it. My husband tried this and it did nothing.
I came home after he went to work, he'd told me about the computer. I came on here and was looking around. I tried unplugging the monitor to see if it would start up. It started up, but again i cannot get it to shut down. It just restarts again.
Does anyone have any hints or suggestions?
Also, when you go to shut it down, the it sounds like the fan speeds up A LOT... it gets really loud.
G4 Mac OS X (10.0.x) It's my husband's computer.
Since I originally posted, I have now talked to Apple, CompUSA and Westinghouse. I think the problem is in the cable. My husband is using a really old monitor cable from my first ever PC(circa1996) with adapters to make it hook to the DVI port on the MAC but connecting it to the VCA port. The tech guy from westinghouse told me that the cable is probably not communicating to shut down the monitor and the computer at the same time so the computer restarts itself. He told me to have my husband get a DVI cable.
Thanks for your advice. I will keep that in mind if the cable doesn't work.
Similar Messages
-
Problem with two monitors while using Photoshop, windows move from 2nd screen to 1st screen.
Problem with two monitors while using Photoshop, windows move from 2nd screen to 1st screen.
I saved a new workspace and it did not help.
No problem before I went to Maverick.I found the fix, go to System Preferences and open Mission Control and uncheck the box to keep monitors as they were (When switching to an application...........)
-
Premiere Pro CS4 - Problem with the monitor program.
Hi. I'm not able solving problems with the monitor using PremiereProCS4. When I drag a photo (also only one photo) in the timeline and play it in the monitor program, vision in the monitor program doesn't run:black monitor or a little part of the photo appear... sometimes distort colours. Asus P5QPRO, Intel 9550 and Sparkle Nvidia GeForce 9800 GTX+ 1024 DDR3; last gpu driver and directX are installed. Different configuration of stratch disks were tested. Where am I wrong?
Dear Bill,
thanks for your answer and your article. I tried with your NTSC 4:3 720x480 PAR 0.9 and, "magically", no more problem!!! I used the script pocedure in Photoshop CS4 to resize my images. Now, before starting my workflow and hoping not to overuse your patience, I would like to indicate you my equipment and my target: I use a Canon Eos 7D (generally for still images, 90% are vertical, and just some videos) and I use Premiere Pro CS4 to burn a dvd (normal, 4.7 Gb or double side, more than 8 Gb) with a 16.9 lcd tv (I'm Italian); my camera save as .jpg and .raw (but why use heavy .raw files if I've to redute to 720x480?!??).
So, according to your "everyone wants the highest quality that they can obtain when doing theri videos..." and "your video project may vary, so you will need to plug in the dimensions for YOUR video project in that case", I've a question: which is the best for me?
And then:
1 - Premiere Pro CS4 havn't a batch or a script procedure for still image like PS (only for videos)!?!
2 - Premiere does'nt allow you to import images like 4.181 Kb (a too large dimension file error appears)!
3 - In the timeline of Premiere, after you dragged images, you can select them and right click to perform "resize to frame size": it seems to run good without problem, but what appen to the photo? Which is it's pixel?
4 - In the general preferences of Premiere you can to optimize rendering for "memory" or not: which is the best for you?
5 - I attached file with a screen of something strange in Premiere: dragging an image (the first of the project) in the timeline, the timeline appears distort (you can see the part in the yellow square): then, when I render the project and play in the monitor program, it becames normal.
Thanks! -
Is someone with iMac 2010 users have problems with the monitor. I mean horizontal stripes and dark screen ?
Mine's a late '09, but there have been display issues with iMacs.
Contact Apple Service, iMac Service or Apple's Express Lane. Do note that if you have AppleCare's protection plan and you're within 50 miles (80 KM) of an Apple repair station, you're eligible for onsite repair since yours is a desktop machine. -
my new macbook air and new thunderbolt monitor will not work together. the keyboard will not engage and the monitor screen keeps going black. is it a problem with the monitor, connection, laptop?
A new Mac comes with 90 days of free tech support from AppleCare.
AppleCare: 1-800-275-2273
Call AppleCare. They will help you.
Best. -
Potential problem with my monitor, please help.
Hello
I recently upgraded my OSX to Mavericks and I've been having problems with my monitor, I've attached a screenshot of what is happening because I didn't know how to explain it and I'm unsure if its the OSX upgrade causing the issue or not, however I'm really worried about my monitor on my macbook pro.
The model I have is the 15" mid 2010 2.4Ghz Intel core i5 with 4GB RAM.Still having this issue with my macbook pro monitor... There was no updates available and I followed every other possible solution, sometimes my monotor looks perfect like there was never any problem and other times my entire screen is just covered with this stuff you've seen in the above image.
I really have no idea what the exact issue is and how to solve it.
This macbook was given to me for university by the government as I have a form of dyslexia and because I've just finished my degree the insurance has ended... is there anyway I can still buy applecare insurance for my machine?! I got this MBP in 2010 so I've had it for three years now.
I'm just worried that one day I'll turn on my machine and the monitor won't work whatsoever.. and I thought apple was suppossed to be good and last a long time.
Hope somebody can help me further.
Thanks. -
Annoying problem with LCD monitor and noise!!
I have MSI 6330 with 1.2 GHz Athlon (it has a built-in sound card), 384 RAM memory.
I just bought a new Cornea 17" LCD monitor with built in speakers.
When I connect the speakers to the sound card, there is an annoying static-like noise coming from the speakers, like an electric transformation sometimes causes. However, this sound is not "broadcasted" to the speakers, because even if I mute the speakers, the noise is still there, as long as there is a picture on the screen. When the monitor is turned off or shows black screen (such as during start up, or when in power-save mode) the noise disappear. The only way to eliminate this noise is buy reducing (almost to zero) the speakers volume, but then you can cannot hear anything at all, not even sound.
I got a new sound card (I thought it was the sound card problem) - same thing. I connected the monitor to a different computer and the problem is gone, which means - it is something with the computer, mobo, different device....something, I don't know what.
Any one have an idea what this could be?
Thank you.Hi!
It could be that you have some problem with the monitor.
I have - so far - not encountered a monitor with built in speakers which gave acceptable sound anyway, the easiest solution might be that you will not use the speakers in the monitor (even the cheapest stand alone speakers will most likely produce better sound quality).
Hans -
Problems with External Monitor In XP
Ok, I've got a huge problem with XP on Bootcamp.
I've recently got a Samsung TV which I can use as an external monitor. This works absolutely fine when I'm using OSX, recognizes the TV and can use it as a second screen.
When I try to use the same monitor in Windows under Bootcamp, it works as an extension of my desktop, but not able to mirror my desktop. I want to do this so I can play my games on a large screen instead of a small one.
I've trawled the forums on this kind of problem and found a few answers. However, many of them talk about the ATI graphics drivers. I've downloaded the appropriate drivers and the control center from the website, but to no avail.
People have also said about going into display properties: settings: advanced and selecting the ATI tab. I have no ATI tab.
Also with the Catalyst Control Center, when I try to run it, it tells me that I dont have permission to change the settings and to contact my administrator, even though I am the administrator.
Does anyone have any ideas how I can solve this?
By the way. I'm connecting the external monitor via the DVI on my Macbook Pro to the HDMI connection on the TV.
Many thanks
ChrisMy logic tells me, if you are using a new MBP the way it's designed is that even if you are plugged in at times it will go in battery mode for a few minutes in order to prevent battery damage, than it will recharge. This happens in the background without notice. However, within this couple of minutes you might notice your display screen to sleep because it is setup to sleep in 1 minute or less in the preference under battery mode. So within that window you might have your screen go blank since the entire process takes a lot more than a minute. I hope this helps.
-
Inkscape/X11 Problems with external Monitor
Hello,
I´m using Inkscape to create vector art on my MacBook Pro.
Since my update to Mavericks I´m having problems with X11. I have the version 2.7.5 of XQuartz installed currently.
After some troubles, Inkscape opens up just fine.
But I cannot drag Inkscape over to my external monitor, which is based to the right of my notebook.
Inkscape simply disappears.
I´m quite the DAU ;-) with Computers and Software, so it would be nice, if you can help me.
Thanks a lot in advance!
Best,
SonjaHow about trying a native Mac app like iDraw http://www.indeeo.com/idraw/
-
I have a Compaq nx9420 laptop and on the screen appeared 3 colums of pixels which are "stuck" in the same color. I don`t think they are dead pixels because sometimes they work . What should i do ?
I have the same problem with my external Acer monitor, starting today. Suddenly, when connected to my MacBook, the Acer monitor says "Input Not Supported". If the Acer monitor is not connected, it says, correctly, "signal not detected".
When the external monitor is connected, my MacBook can see it, has a display preference for it, lets me change resolution, etc, but the Acer monitor simply says "Input Not Supported". This just started today, and I did the system upgrade yesterday. Is there a connection?
I've tried the usual fiddling with connections, rebooting, everything. -
Hello all,
did you ever use an external monitor with the mac book pro? Once disconnected the external monitor, the Mac freezes and becomes unresponsive. Do you know why?
thank you very much
FulvioI have the same problem with my external Acer monitor, starting today. Suddenly, when connected to my MacBook, the Acer monitor says "Input Not Supported". If the Acer monitor is not connected, it says, correctly, "signal not detected".
When the external monitor is connected, my MacBook can see it, has a display preference for it, lets me change resolution, etc, but the Acer monitor simply says "Input Not Supported". This just started today, and I did the system upgrade yesterday. Is there a connection?
I've tried the usual fiddling with connections, rebooting, everything. -
L430 : problem with multi-monitoring (with workstation)
Hello,
I have some trouble with multi-monitoring on a L430 setup. I have a workstation with a 20' Samsung connected on it (VGA). Double display runs very well.
But now that i have decided to put a 3rd monitor, it is a complete mess. I tried to plug the 3rd screen on the DVI port, but now the 2nd screen is black.
i tried with 2 different monitors, with 1 different cable, i tried to put the 3rd screen directly on the VGA port of the laptop, but i had the same problem.
I read somewhere that with the L430, one cannot plug a 3rd screen, but i cannot believe it.
Is it real?I would like to be sure of that :/ Working in an IT departement, being able to have only 2 screens because of company limits is strange...
-
Leopard 10.5.2 problems with external monitor
Since I installed 10.5.2 on my macbook pro I cannot have a external monitor Dell 3007 WFP connected to my laptop when starting the computer. The screen will only show up on my laptop but only my background picture but nothing else so I have to perform each time a forced exit. However if I start my computer with my external computer unplugged the laptop works fine and if I then connect my Dell monitor everything works fine. However the closed lid mechanism is not working either anymore. My computer goes to sleep if you press an external keyboard the Dell screen comes on for few seconds but then goes to sleep again. I never had this problem with leopard 10.5.1. Does anyone known an answer to this problem.
I have exactly the same problem. After 4 hours on the phone over 2 calls to Apple Care, they finally let me know that this is an issue with 10.5.2. They said they are working on a fix that would come out with a future update, and offered the workaround of reinstalling Leopard without 10.5.2 update.
They sent me this link about reinstalling without losing files and settings:
http://docs.info.apple.com/article.html?path=Mac/10.5/en/8177.html
It's very frustrating, and I hope they find a fix for it soon! -
Problem with 3 monitors Intel HD Graphics and GeForce GTX 560
I would like to attach 3 monitors to my box -- 1 to integrated Intel card and 2 to discreet Nvidia. I've tried different configs but I failed to make monitors connected to different cards to work at the same time. I have system with stock kernel, latest updates and the following configuration:
$ lspci | egrep "VGA|Disp"
00:02.0 Display controller: Intel Corporation 2nd Generation Core Processor Family Integrated Graphics Controller (rev 09)
01:00.0 VGA compatible controller: NVIDIA Corporation GF114 [GeForce GTX 560 Ti] (rev a1)
$ pacman -Qi xorg-server xf86-video-intel nvidia awesome-git linux | egrep "Name|Version"
Name : xorg-server
Version : 1.17.1-3
Name : xf86-video-intel
Version : 2.99.917-3
Name : nvidia
Version : 346.47-3
Name : awesome-git
Version : 3.5.2.397.gdde5b1b-1
Name : linux
Version : 3.18.6-1
$ lsmod | egrep 'i915|nvidia'
nvidia 8335766 46
i915 946695 2
button 12953 1 i915
i2c_algo_bit 12744 1 i915
video 18043 2 i915,asus_wmi
drm_kms_helper 80985 1 i915
drm 263481 7 i915,drm_kms_helper,nvidia
i2c_core 50152 6
drm,i915,i2c_i801,drm_kms_helper,i2c_algo_bit,nvidia
intel_gtt 17848 2 i915,intel_agp
I've tried different xorg configs. Here is the best one. All 3 monitors are active with it (I could drag cursor over them) but only 2 (which connected to nvidia card) display DE.
Section "DRI"
Mode 0666
EndSection
Section "Monitor"
Identifier "SAM"
ModelName "Samsung SMS27A850"
HorizSync 30.0 - 90.0
VertRefresh 56.0 - 75.0
Option "DPMS"
DisplaySize 597 336 # In millimeters
EndSection
Section "Monitor"
Identifier "VS"
ModelName "ViewSonic VG1930wm"
Option "DPMS"
Option "RightOf" "SAM"
Option "Rotate" "left"
EndSection
Section "Monitor"
Identifier "BNQ"
ModelName "BenQ FP737s"
Option "DPMS"
Option "LeftOf" "SAM"
Option "Rotate" "left"
EndSection
Section "Device"
Identifier "nvidia"
Driver "nvidia"
VendorName "NVIDIA Corporation"
BoardName "GeForce GTX 560 Ti"
BusID "01:00:0"
Option "Monitor-DVI-I-1" "SAM"
Option "Monitor-DVI-I-2" "VS"
EndSection
Section "Device"
Identifier "intel"
Driver "intel"
Option "AccelMethod" "none"
VendorName "Intel"
BoardName "Intel Integrated Graphic Controller"
BusID "00:02:0"
Option "Monitor-VGA-0" "BNQ"
EndSection
Section "Screen"
Identifier "SAM-Screen"
Device "nvidia"
Monitor "SAM"
EndSection
Section "Screen"
Identifier "VS-Screen"
Device "nvidia"
Monitor "VS"
EndSection
Section "Screen"
Identifier "BNQ-Screen"
Device "intel"
Monitor "BNQ"
EndSection
Section "ServerLayout"
Identifier "Layout0"
Screen 0 "SAM-Screen"
Screen 1 "VS-Screen" RightOf "SAM-Screen"
Screen 2 "BNQ-Screen" LeftOf "SAM-Screen"
Option "Xinerama" "0"
EndSection
Also, xrandr shows last monitor (VGA-0, it plugged into Intel card) as disconnected
$ xrandr
Screen 0: minimum 8 x 8, current 3460 x 1440, maximum 16384 x 16384
DVI-I-0 disconnected primary (normal left inverted right x axis y axis)
VGA-0 disconnected (normal left inverted right x axis y axis)
DVI-I-1 connected 2560x1440+0+0 (normal left inverted right x axis y axis) 518mm x 324mm
2560x1440 59.95*+
1920x1200 59.88
1920x1080 60.00 50.00
1680x1050 59.95
1600x1200 60.00
1440x900 59.89
1280x1024 75.02 60.02
1280x960 60.00
1280x800 59.81
1280x720 60.00 50.00
1152x864 75.00
1024x768 75.03 70.07 60.00
800x600 75.00 72.19 60.32 56.25
720x576 50.00
720x480 59.94
640x480 75.00 72.81 59.94
HDMI-0 disconnected (normal left inverted right x axis y axis)
DVI-I-2 connected 900x1440+2560+0 left (normal left inverted right x axis y axis) 410mm x 256mm
1440x900 59.89*+ 74.98
1280x1024 75.02 60.02
1280x960 60.00
1152x864 75.00
1024x768 75.03 70.07 60.00
800x600 75.00 72.19 60.32 56.25
640x480 75.00 72.81 59.94
640x400 70.10
But it's still posible to start application on last monitor with 'env DISPLAY:=0.1 urxvt'
Here is full Xorg log file and highlights:
[ 4789.920] (EE) intel(1): Cannot position output VGA1 relative to unknown output SAM
[ 4792.053] (EE) intel(G0): [drm] failed to set drm interface version: Permission denied [13].
[ 4792.053] (II) intel(G0): [drm] Contents of '/sys/kernel/debug/dri/0/clients':
[ 4792.053] (II) intel(G0): [drm] command pid dev master a uid magic
[ 4792.053] (II) intel(G0): [drm] Xorg 10086 0 y y 0 0
[ 4792.053] (II) intel(G0): [drm] Xorg 10086 0 n y 0 0
[ 4792.053] (EE) intel(G0): Failed to claim DRM device.
[ 4792.053] (II) UnloadModule: "intel"
[ 4789.342]
X.Org X Server 1.17.1
Release Date: 2015-02-10
[ 4789.342] X Protocol Version 11, Revision 0
[ 4789.342] Build Operating System: Linux 3.18.6-1-ARCH x86_64
[ 4789.342] Current Operating System: Linux earth 3.18.6-1-ARCH #1 SMP PREEMPT Sat Feb 7 08:44:05 CET 2015 x86_64
[ 4789.342] Kernel command line: BOOT_IMAGE=/boot/vmlinuz-linux root=UUID=dc49b07c-e67c-4b6f-91f7-7c1adc050e21 rw quiet ipv6.disable=1 init=/usr/lib/systemd/systemd security=tomoyo TOMOYO_trigger=/usr/lib/systemd/systemd
[ 4789.342] Build Date: 22 February 2015 12:50:32PM
[ 4789.342]
[ 4789.342] Current version of pixman: 0.32.6
[ 4789.342] Before reporting problems, check http://wiki.x.org
to make sure that you have the latest version.
[ 4789.342] Markers: (--) probed, (**) from config file, (==) default setting,
(++) from command line, (!!) notice, (II) informational,
(WW) warning, (EE) error, (NI) not implemented, (??) unknown.
[ 4789.342] (==) Log file: "/var/log/Xorg.0.log", Time: Sun Mar 1 14:43:55 2015
[ 4789.342] (==) Using config directory: "/etc/X11/xorg.conf.d"
[ 4789.342] (==) Using system config directory "/usr/share/X11/xorg.conf.d"
[ 4789.342] (==) ServerLayout "Layout0"
[ 4789.342] (**) |-->Screen "SAM-Screen" (0)
[ 4789.342] (**) | |-->Monitor "SAM"
[ 4789.343] (**) | |-->Device "nvidia"
[ 4789.343] (**) |-->Screen "VS-Screen" (1)
[ 4789.343] (**) | |-->Monitor "VS"
[ 4789.343] (**) | |-->Device "nvidia"
[ 4789.343] (**) |-->Screen "BNQ-Screen" (2)
[ 4789.343] (**) | |-->Monitor "BNQ"
[ 4789.343] (**) | |-->Device "intel"
[ 4789.343] (**) Option "Xinerama" "0"
[ 4789.343] (==) Automatically adding devices
[ 4789.343] (==) Automatically enabling devices
[ 4789.343] (==) Automatically adding GPU devices
[ 4789.343] (==) FontPath set to:
/usr/share/fonts/misc/,
/usr/share/fonts/TTF/,
/usr/share/fonts/OTF/,
/usr/share/fonts/Type1/,
/usr/share/fonts/100dpi/,
/usr/share/fonts/75dpi/
[ 4789.343] (==) ModulePath set to "/usr/lib/xorg/modules"
[ 4789.343] (II) The server relies on udev to provide the list of input devices.
If no devices become available, reconfigure udev or disable AutoAddDevices.
[ 4789.343] (II) Loader magic: 0x815d80
[ 4789.343] (II) Module ABI versions:
[ 4789.343] X.Org ANSI C Emulation: 0.4
[ 4789.343] X.Org Video Driver: 19.0
[ 4789.343] X.Org XInput driver : 21.0
[ 4789.343] X.Org Server Extension : 9.0
[ 4789.344] (EE) systemd-logind: failed to get session: PID 10086 does not belong to any known session
[ 4789.345] (II) xfree86: Adding drm device (/dev/dri/card1)
[ 4789.345] (II) xfree86: Adding drm device (/dev/dri/card0)
[ 4789.347] (--) PCI: (0:0:2:0) 8086:0102:1043:84ca rev 9, Mem @ 0xf6400000/4194304, 0xd0000000/268435456, I/O @ 0x0000f000/64
[ 4789.347] (--) PCI:*(0:1:0:0) 10de:1200:10b0:0401 rev 161, Mem @ 0xf4000000/33554432, 0xe0000000/134217728, 0xe8000000/67108864, I/O @ 0x0000e000/128, BIOS @ 0x????????/524288
[ 4789.347] (WW) Open ACPI failed (/var/run/acpid.socket) (No such file or directory)
[ 4789.347] (II) LoadModule: "glx"
[ 4789.347] (II) Loading /usr/lib/xorg/modules/extensions/libglx.so
[ 4789.359] (II) Module glx: vendor="NVIDIA Corporation"
[ 4789.359] compiled for 4.0.2, module version = 1.0.0
[ 4789.359] Module class: X.Org Server Extension
[ 4789.359] (II) NVIDIA GLX Module 346.47 Thu Feb 19 18:09:07 PST 2015
[ 4789.359] (II) LoadModule: "nvidia"
[ 4789.359] (II) Loading /usr/lib/xorg/modules/drivers/nvidia_drv.so
[ 4789.360] (II) Module nvidia: vendor="NVIDIA Corporation"
[ 4789.360] compiled for 4.0.2, module version = 1.0.0
[ 4789.360] Module class: X.Org Video Driver
[ 4789.360] (II) LoadModule: "intel"
[ 4789.360] (II) Loading /usr/lib/xorg/modules/drivers/intel_drv.so
[ 4789.360] (II) Module intel: vendor="X.Org Foundation"
[ 4789.360] compiled for 1.17.1, module version = 2.99.917
[ 4789.360] Module class: X.Org Video Driver
[ 4789.360] ABI class: X.Org Video Driver, version 19.0
[ 4789.360] (II) NVIDIA dlloader X Driver 346.47 Thu Feb 19 17:47:18 PST 2015
[ 4789.360] (II) NVIDIA Unified Driver for all Supported NVIDIA GPUs
[ 4789.360] (II) intel: Driver for Intel(R) Integrated Graphics Chipsets:
i810, i810-dc100, i810e, i815, i830M, 845G, 854, 852GM/855GM, 865G,
915G, E7221 (i915), 915GM, 945G, 945GM, 945GME, Pineview GM,
Pineview G, 965G, G35, 965Q, 946GZ, 965GM, 965GME/GLE, G33, Q35, Q33,
GM45, 4 Series, G45/G43, Q45/Q43, G41, B43
[ 4789.360] (II) intel: Driver for Intel(R) HD Graphics: 2000-6000
[ 4789.360] (II) intel: Driver for Intel(R) Iris(TM) Graphics: 5100, 6100
[ 4789.360] (II) intel: Driver for Intel(R) Iris(TM) Pro Graphics: 5200, 6200, P6300
[ 4789.360] (++) using VT number 7
[ 4789.471] (II) Loading sub module "fb"
[ 4789.471] (II) LoadModule: "fb"
[ 4789.471] (II) Loading /usr/lib/xorg/modules/libfb.so
[ 4789.471] (II) Module fb: vendor="X.Org Foundation"
[ 4789.471] compiled for 1.17.1, module version = 1.0.0
[ 4789.471] ABI class: X.Org ANSI C Emulation, version 0.4
[ 4789.472] (II) Loading sub module "wfb"
[ 4789.472] (II) LoadModule: "wfb"
[ 4789.472] (II) Loading /usr/lib/xorg/modules/libwfb.so
[ 4789.472] (II) Module wfb: vendor="X.Org Foundation"
[ 4789.472] compiled for 1.17.1, module version = 1.0.0
[ 4789.472] ABI class: X.Org ANSI C Emulation, version 0.4
[ 4789.472] (II) Loading sub module "ramdac"
[ 4789.472] (II) LoadModule: "ramdac"
[ 4789.472] (II) Module "ramdac" already built-in
[ 4789.473] (II) intel(1): Using Kernel Mode Setting driver: i915, version 1.6.0 20140905
[ 4789.474] (II) intel(G0): Using Kernel Mode Setting driver: i915, version 1.6.0 20140905
[ 4789.474] (II) NVIDIA(0): Creating default Display subsection in Screen section
"SAM-Screen" for depth/fbbpp 24/32
[ 4789.474] (==) NVIDIA(0): Depth 24, (==) framebuffer bpp 32
[ 4789.474] (==) NVIDIA(0): RGB weight 888
[ 4789.474] (==) NVIDIA(0): Default visual is TrueColor
[ 4789.474] (==) NVIDIA(0): Using gamma correction (1.0, 1.0, 1.0)
[ 4789.474] (**) NVIDIA(0): Enabling 2D acceleration
[ 4789.841] (II) NVIDIA(GPU-0): Found DRM driver nvidia-drm (20150116)
[ 4789.842] (II) NVIDIA(0): NVIDIA GPU GeForce GTX 560 Ti (GF114) at PCI:1:0:0 (GPU-0)
[ 4789.842] (--) NVIDIA(0): Memory: 1048576 kBytes
[ 4789.842] (--) NVIDIA(0): VideoBIOS: 70.24.21.00.00
[ 4789.842] (II) NVIDIA(0): Detected PCI Express Link width: 16X
[ 4789.875] (--) NVIDIA(0): Valid display device(s) on GeForce GTX 560 Ti at PCI:1:0:0
[ 4789.875] (--) NVIDIA(0): CRT-0
[ 4789.875] (--) NVIDIA(0): CRT-1
[ 4789.875] (--) NVIDIA(0): Samsung SMS27A850 (DFP-0) (boot, connected)
[ 4789.875] (--) NVIDIA(0): DFP-1
[ 4789.875] (--) NVIDIA(0): ViewSonic VG1930wm (DFP-2) (connected)
[ 4789.875] (--) NVIDIA(GPU-0): CRT-0: 400.0 MHz maximum pixel clock
[ 4789.875] (--) NVIDIA(GPU-0): CRT-1: 400.0 MHz maximum pixel clock
[ 4789.875] (--) NVIDIA(0): Samsung SMS27A850 (DFP-0): Internal TMDS
[ 4789.875] (--) NVIDIA(GPU-0): Samsung SMS27A850 (DFP-0): 330.0 MHz maximum pixel clock
[ 4789.875] (--) NVIDIA(0): DFP-1: Internal TMDS
[ 4789.875] (--) NVIDIA(GPU-0): DFP-1: 165.0 MHz maximum pixel clock
[ 4789.875] (--) NVIDIA(0): ViewSonic VG1930wm (DFP-2): Internal TMDS
[ 4789.875] (--) NVIDIA(GPU-0): ViewSonic VG1930wm (DFP-2): 330.0 MHz maximum pixel clock
[ 4789.875] (**) NVIDIA(0): Option "Rotate" "left"
[ 4789.875] (**) NVIDIA(0): Using HorizSync/VertRefresh ranges from the EDID for display
[ 4789.875] (**) NVIDIA(0): device Samsung SMS27A850 (DFP-0) (Using EDID frequencies
[ 4789.875] (**) NVIDIA(0): has been enabled on all display devices.)
[ 4789.875] (WW) NVIDIA(GPU-0): The EDID for Samsung SMS27A850 (DFP-0) contradicts itself:
[ 4789.875] (WW) NVIDIA(GPU-0): mode "1920x1080" is specified in the EDID; however, the
[ 4789.875] (WW) NVIDIA(GPU-0): EDID's valid VertRefresh range (56.000-75.000 Hz) would
[ 4789.875] (WW) NVIDIA(GPU-0): exclude this mode's VertRefresh (50.0 Hz); ignoring
[ 4789.875] (WW) NVIDIA(GPU-0): VertRefresh check for mode "1920x1080".
[ 4789.876] (WW) NVIDIA(GPU-0): The EDID for Samsung SMS27A850 (DFP-0) contradicts itself:
[ 4789.876] (WW) NVIDIA(GPU-0): mode "1280x720" is specified in the EDID; however, the
[ 4789.876] (WW) NVIDIA(GPU-0): EDID's valid VertRefresh range (56.000-75.000 Hz) would
[ 4789.876] (WW) NVIDIA(GPU-0): exclude this mode's VertRefresh (50.0 Hz); ignoring
[ 4789.876] (WW) NVIDIA(GPU-0): VertRefresh check for mode "1280x720".
[ 4789.876] (WW) NVIDIA(GPU-0): The EDID for Samsung SMS27A850 (DFP-0) contradicts itself:
[ 4789.876] (WW) NVIDIA(GPU-0): mode "720x576" is specified in the EDID; however, the
[ 4789.876] (WW) NVIDIA(GPU-0): EDID's valid VertRefresh range (56.000-75.000 Hz) would
[ 4789.876] (WW) NVIDIA(GPU-0): exclude this mode's VertRefresh (50.0 Hz); ignoring
[ 4789.876] (WW) NVIDIA(GPU-0): VertRefresh check for mode "720x576".
[ 4789.877] (**) NVIDIA(0): Using HorizSync/VertRefresh ranges from the EDID for display
[ 4789.877] (**) NVIDIA(0): device ViewSonic VG1930wm (DFP-2) (Using EDID frequencies
[ 4789.877] (**) NVIDIA(0): has been enabled on all display devices.)
[ 4789.878] (==) NVIDIA(0):
[ 4789.878] (==) NVIDIA(0): No modes were requested; the default mode "nvidia-auto-select"
[ 4789.878] (==) NVIDIA(0): will be used as the requested mode.
[ 4789.878] (==) NVIDIA(0):
[ 4789.878] (II) NVIDIA(0): Validated MetaModes:
[ 4789.878] (II) NVIDIA(0):
[ 4789.878] (II) NVIDIA(0): "DFP-0:nvidia-auto-select,DFP-2:nvidia-auto-select{Rotation=90}"
[ 4789.878] (II) NVIDIA(0): Virtual screen size determined to be 3460 x 1440
[ 4789.905] (--) NVIDIA(0): DPI set to (125, 114); computed from "UseEdidDpi" X config
[ 4789.905] (--) NVIDIA(0): option
[ 4789.906] (--) intel(1): Integrated Graphics Chipset: Intel(R) HD Graphics 2000
[ 4789.906] (--) intel(1): CPU: x86-64, sse2, sse3, ssse3, sse4.1, sse4.2, avx
[ 4789.906] (II) intel(1): Creating default Display subsection in Screen section
"BNQ-Screen" for depth/fbbpp 24/32
[ 4789.906] (==) intel(1): Depth 24, (--) framebuffer bpp 32
[ 4789.906] (==) intel(1): RGB weight 888
[ 4789.906] (==) intel(1): Default visual is TrueColor
[ 4789.906] (**) intel(1): Option "AccelMethod" "none"
[ 4789.906] (II) intel(1): Output VGA1 using monitor section BNQ
[ 4789.906] (**) intel(1): Option "LeftOf" "SAM"
[ 4789.906] (**) intel(1): Option "Rotate" "left"
[ 4789.906] (II) intel(1): Enabled output VGA1
[ 4789.906] (II) intel(1): Output HDMI1 has no monitor section
[ 4789.906] (II) intel(1): Enabled output HDMI1
[ 4789.906] (II) intel(1): Output DP1 has no monitor section
[ 4789.906] (II) intel(1): Enabled output DP1
[ 4789.906] (II) intel(1): Output HDMI2 has no monitor section
[ 4789.906] (II) intel(1): Enabled output HDMI2
[ 4789.906] (II) intel(1): Output HDMI3 has no monitor section
[ 4789.906] (II) intel(1): Enabled output HDMI3
[ 4789.906] (II) intel(1): Output DP2 has no monitor section
[ 4789.906] (II) intel(1): Enabled output DP2
[ 4789.906] (II) intel(1): Output DP3 has no monitor section
[ 4789.906] (II) intel(1): Enabled output DP3
[ 4789.906] (--) intel(1): Using a maximum size of 256x256 for hardware cursors
[ 4789.906] (II) intel(1): Output VIRTUAL1 has no monitor section
[ 4789.906] (II) intel(1): Enabled output VIRTUAL1
[ 4789.906] (II) intel(1): EDID for output DP1
[ 4789.906] (II) intel(1): EDID for output DP2
[ 4789.906] (II) intel(1): EDID for output DP3
[ 4789.906] (II) intel(1): EDID for output HDMI1
[ 4789.906] (II) intel(1): EDID for output HDMI2
[ 4789.907] (II) intel(1): EDID for output HDMI3
[ 4789.920] (II) intel(1): EDID for output VGA1
[ 4789.920] (II) intel(1): Manufacturer: BNQ Model: 7659 Serial#: 28
[ 4789.920] (II) intel(1): Year: 2003 Week: 39
[ 4789.920] (II) intel(1): EDID Version: 1.3
[ 4789.920] (II) intel(1): Analog Display Input, Input Voltage Level: 0.700/0.700 V
[ 4789.920] (II) intel(1): Sync: Separate Composite
[ 4789.920] (II) intel(1): Max Image Size [cm]: horiz.: 34 vert.: 27
[ 4789.920] (II) intel(1): Gamma: 2.20
[ 4789.920] (II) intel(1): DPMS capabilities: StandBy Suspend Off; RGB/Color Display
[ 4789.920] (II) intel(1): First detailed timing is preferred mode
[ 4789.920] (II) intel(1): redX: 0.640 redY: 0.340 greenX: 0.290 greenY: 0.611
[ 4789.920] (II) intel(1): blueX: 0.140 blueY: 0.069 whiteX: 0.310 whiteY: 0.330
[ 4789.920] (II) intel(1): Supported established timings:
[ 4789.920] (II) intel(1): 720x400@70Hz
[ 4789.920] (II) intel(1): 640x480@60Hz
[ 4789.920] (II) intel(1): 640x480@67Hz
[ 4789.920] (II) intel(1): 640x480@72Hz
[ 4789.920] (II) intel(1): 640x480@75Hz
[ 4789.920] (II) intel(1): 800x600@56Hz
[ 4789.920] (II) intel(1): 800x600@60Hz
[ 4789.920] (II) intel(1): 800x600@72Hz
[ 4789.920] (II) intel(1): 800x600@75Hz
[ 4789.920] (II) intel(1): 832x624@75Hz
[ 4789.920] (II) intel(1): 1024x768@60Hz
[ 4789.920] (II) intel(1): 1024x768@70Hz
[ 4789.920] (II) intel(1): 1024x768@75Hz
[ 4789.920] (II) intel(1): 1280x1024@75Hz
[ 4789.920] (II) intel(1): 1152x864@75Hz
[ 4789.920] (II) intel(1): Manufacturer's mask: 0
[ 4789.920] (II) intel(1): Supported standard timings:
[ 4789.920] (II) intel(1): #0: hsize: 1152 vsize 864 refresh: 75 vid: 20337
[ 4789.920] (II) intel(1): #1: hsize: 1280 vsize 1024 refresh: 76 vid: 36993
[ 4789.920] (II) intel(1): #2: hsize: 1280 vsize 1024 refresh: 60 vid: 32897
[ 4789.920] (II) intel(1): #3: hsize: 1280 vsize 1024 refresh: 72 vid: 35969
[ 4789.920] (II) intel(1): Supported detailed timing:
[ 4789.920] (II) intel(1): clock: 108.0 MHz Image Size: 338 x 270 mm
[ 4789.920] (II) intel(1): h_active: 1280 h_sync: 1328 h_sync_end 1440 h_blank_end 1688 h_border: 0
[ 4789.920] (II) intel(1): v_active: 1024 v_sync: 1025 v_sync_end 1028 v_blanking: 1066 v_border: 0
[ 4789.920] (II) intel(1): Supported detailed timing:
[ 4789.920] (II) intel(1): clock: 25.2 MHz Image Size: 304 x 228 mm
[ 4789.920] (II) intel(1): h_active: 640 h_sync: 656 h_sync_end 752 h_blank_end 800 h_border: 0
[ 4789.920] (II) intel(1): v_active: 350 v_sync: 387 v_sync_end 389 v_blanking: 449 v_border: 0
[ 4789.920] (II) intel(1): Ranges: V min: 56 V max: 75 Hz, H min: 31 H max: 81 kHz, PixClock max 145 MHz
[ 4789.920] (II) intel(1): Monitor name: BenQ FP737s
[ 4789.920] (II) intel(1): EDID (in hex):
[ 4789.920] (II) intel(1): 00ffffffffffff0009d159761c000000
[ 4789.920] (II) intel(1): 270d01036c221b78eac6f6a3574a9c23
[ 4789.920] (II) intel(1): 114f54bfef80714f81908180818c0101
[ 4789.920] (II) intel(1): 010101010101302a009851002a403070
[ 4789.920] (II) intel(1): 1300520e1100001ed50980a0205e6310
[ 4789.920] (II) intel(1): 1060520830e41000001a000000fd0038
[ 4789.920] (II) intel(1): 4b1f510e000a202020202020000000fc
[ 4789.920] (II) intel(1): 0042656e51204650373337730a200072
[ 4789.920] (II) intel(1): Printing probed modes for output VGA1
[ 4789.920] (II) intel(1): Modeline "1280x1024"x60.0 108.00 1280 1328 1440 1688 1024 1025 1028 1066 +hsync +vsync (64.0 kHz eP)
[ 4789.920] (II) intel(1): Modeline "1280x1024"x76.0 141.81 1280 1376 1512 1744 1024 1025 1028 1070 -hsync +vsync (81.3 kHz)
[ 4789.920] (II) intel(1): Modeline "1280x1024"x75.0 135.00 1280 1296 1440 1688 1024 1025 1028 1066 +hsync +vsync (80.0 kHz e)
[ 4789.920] (II) intel(1): Modeline "1280x1024"x72.0 132.84 1280 1368 1504 1728 1024 1025 1028 1067 -hsync +vsync (76.9 kHz)
[ 4789.920] (II) intel(1): Modeline "1152x864"x75.0 108.00 1152 1216 1344 1600 864 865 868 900 +hsync +vsync (67.5 kHz e)
[ 4789.920] (II) intel(1): Modeline "1024x768"x75.1 78.80 1024 1040 1136 1312 768 769 772 800 +hsync +vsync (60.1 kHz e)
[ 4789.920] (II) intel(1): Modeline "1024x768"x70.1 75.00 1024 1048 1184 1328 768 771 777 806 -hsync -vsync (56.5 kHz e)
[ 4789.920] (II) intel(1): Modeline "1024x768"x60.0 65.00 1024 1048 1184 1344 768 771 777 806 -hsync -vsync (48.4 kHz e)
[ 4789.920] (II) intel(1): Modeline "832x624"x74.6 57.28 832 864 928 1152 624 625 628 667 -hsync -vsync (49.7 kHz e)
[ 4789.920] (II) intel(1): Modeline "800x600"x72.2 50.00 800 856 976 1040 600 637 643 666 +hsync +vsync (48.1 kHz e)
[ 4789.920] (II) intel(1): Modeline "800x600"x75.0 49.50 800 816 896 1056 600 601 604 625 +hsync +vsync (46.9 kHz e)
[ 4789.920] (II) intel(1): Modeline "800x600"x60.3 40.00 800 840 968 1056 600 601 605 628 +hsync +vsync (37.9 kHz e)
[ 4789.920] (II) intel(1): Modeline "800x600"x56.2 36.00 800 824 896 1024 600 601 603 625 +hsync +vsync (35.2 kHz e)
[ 4789.920] (II) intel(1): Modeline "640x480"x75.0 31.50 640 656 720 840 480 481 484 500 -hsync -vsync (37.5 kHz e)
[ 4789.920] (II) intel(1): Modeline "640x480"x72.8 31.50 640 664 704 832 480 489 491 520 -hsync -vsync (37.9 kHz e)
[ 4789.920] (II) intel(1): Modeline "640x480"x66.7 30.24 640 704 768 864 480 483 486 525 -hsync -vsync (35.0 kHz e)
[ 4789.920] (II) intel(1): Modeline "640x480"x60.0 25.20 640 656 752 800 480 490 492 525 -hsync -vsync (31.5 kHz e)
[ 4789.920] (II) intel(1): Modeline "720x400"x70.1 28.32 720 738 846 900 400 412 414 449 -hsync +vsync (31.5 kHz e)
[ 4789.920] (II) intel(1): Modeline "640x350"x70.1 25.17 640 656 752 800 350 387 389 449 +hsync -vsync (31.5 kHz e)
[ 4789.920] (II) intel(1): EDID for output VIRTUAL1
[ 4789.920] (II) intel(1): Output DP1 disconnected
[ 4789.920] (II) intel(1): Output DP2 disconnected
[ 4789.920] (II) intel(1): Output DP3 disconnected
[ 4789.920] (II) intel(1): Output HDMI1 disconnected
[ 4789.920] (II) intel(1): Output HDMI2 disconnected
[ 4789.920] (II) intel(1): Output HDMI3 disconnected
[ 4789.920] (II) intel(1): Output VGA1 connected
[ 4789.920] (II) intel(1): Output VIRTUAL1 disconnected
[ 4789.920] (II) intel(1): Using user preference for initial modes
[ 4789.920] (II) intel(1): Output VGA1 using initial mode 1280x1024
[ 4789.920] (EE) intel(1): Cannot position output VGA1 relative to unknown output SAM
[ 4789.920] (II) intel(1): Using default gamma of (1.0, 1.0, 1.0) unless otherwise stated.
[ 4789.920] (==) intel(1): TearFree disabled
[ 4789.920] (==) intel(1): DPI set to (96, 96)
[ 4789.920] (II) Loading sub module "dri2"
[ 4789.920] (II) LoadModule: "dri2"
[ 4789.920] (II) Module "dri2" already built-in
[ 4789.920] (II) Loading sub module "present"
[ 4789.920] (II) LoadModule: "present"
[ 4789.920] (II) Module "present" already built-in
[ 4792.053] (EE) intel(G0): [drm] failed to set drm interface version: Permission denied [13].
[ 4792.053] (II) intel(G0): [drm] Contents of '/sys/kernel/debug/dri/0/clients':
[ 4792.053] (II) intel(G0): [drm] command pid dev master a uid magic
[ 4792.053] (II) intel(G0): [drm] Xorg 10086 0 y y 0 0
[ 4792.053] (II) intel(G0): [drm] Xorg 10086 0 n y 0 0
[ 4792.053] (EE) intel(G0): Failed to claim DRM device.
[ 4792.053] (II) UnloadModule: "intel"
[ 4792.053] (--) Depth 24 pixmap format is 32 bpp
[ 4792.053] (II) NVIDIA: Using 3072.00 MB of virtual memory for indirect memory
[ 4792.053] (II) NVIDIA: access.
[ 4792.057] (II) NVIDIA(0): ACPI: failed to connect to the ACPI event daemon; the daemon
[ 4792.057] (II) NVIDIA(0): may not be running or the "AcpidSocketPath" X
[ 4792.057] (II) NVIDIA(0): configuration option may not be set correctly. When the
[ 4792.057] (II) NVIDIA(0): ACPI event daemon is available, the NVIDIA X driver will
[ 4792.057] (II) NVIDIA(0): try to use it to receive ACPI event notifications. For
[ 4792.057] (II) NVIDIA(0): details, please see the "ConnectToAcpid" and
[ 4792.057] (II) NVIDIA(0): "AcpidSocketPath" X configuration options in Appendix B: X
[ 4792.057] (II) NVIDIA(0): Config Options in the README.
[ 4792.091] (II) NVIDIA(0): Setting mode "DFP-0:nvidia-auto-select,DFP-2:nvidia-auto-select{Rotation=90}"
[ 4792.264] (==) NVIDIA(0): Disabling shared memory pixmaps
[ 4792.264] (==) NVIDIA(0): Backing store enabled
[ 4792.264] (==) NVIDIA(0): Silken mouse enabled
[ 4792.264] (**) NVIDIA(0): DPMS enabled
[ 4792.264] (II) Loading sub module "dri2"
[ 4792.264] (II) LoadModule: "dri2"
[ 4792.264] (II) Module "dri2" already built-in
[ 4792.264] (II) NVIDIA(0): [DRI2] Setup complete
[ 4792.264] (II) NVIDIA(0): [DRI2] VDPAU driver: nvidia
[ 4792.264] (--) RandR disabled
[ 4792.264] (II) intel(1): SNA initialized with disabled backend
[ 4792.264] (==) intel(1): Backing store enabled
[ 4792.264] (==) intel(1): Silken mouse enabled
[ 4792.264] (II) intel(1): HW Cursor enabled
[ 4792.264] (II) intel(1): RandR 1.2 enabled, ignore the following RandR disabled message.
[ 4792.264] (**) intel(1): DPMS enabled
[ 4792.264] (==) intel(1): display hotplug detection enabled
[ 4792.264] (II) intel(1): Textured video not supported on this hardware
[ 4792.264] (WW) intel(1): loading DRI2 whilst the GPU is wedged.
[ 4792.264] (II) intel(1): [DRI2] Setup complete
[ 4792.264] (II) intel(1): [DRI2] DRI driver: i965
[ 4792.264] (II) intel(1): [DRI2] VDPAU driver: i965
[ 4792.264] (II) intel(1): direct rendering: DRI2 enabled
[ 4792.265] (II) intel(1): hardware support for Present enabled
[ 4792.265] (WW) intel(1): Option "Monitor-VGA-0" is not used
[ 4792.265] (WW) intel(1): Option "LeftOf" is not used
[ 4792.265] (WW) intel(1): Option "Rotate" is not used
[ 4792.265] (--) RandR disabled
[ 4792.268] (II) Initializing extension GLX
[ 4792.268] (II) Indirect GLX disabled.(II) intel(1): switch to mode [email protected] on VGA1 using pipe 0, position (0, 0), rotation left, reflection none
[ 4792.332] (II) intel(1): Setting screen physical size to 270 x 338
[ 4792.386] (II) config/udev: Adding input device Power Button (/dev/input/event2)
[ 4792.386] (**) Power Button: Applying InputClass "evdev keyboard catchall"
[ 4792.386] (**) Power Button: Applying InputClass "libinput keyboard catchall"
[ 4792.386] (**) Power Button: Applying InputClass "system-keyboard"
[ 4792.386] (II) LoadModule: "libinput"
[ 4792.386] (II) Loading /usr/lib/xorg/modules/input/libinput_drv.so
[ 4792.387] (II) Module libinput: vendor="X.Org Foundation"
[ 4792.387] compiled for 1.17.1, module version = 0.7.0
[ 4792.387] Module class: X.Org XInput Driver
[ 4792.387] ABI class: X.Org XInput driver, version 21.0
[ 4792.387] (II) Using input driver 'libinput' for 'Power Button'
[ 4792.387] (**) Power Button: always reports core events
[ 4792.387] (**) Option "Device" "/dev/input/event2"
[ 4792.387] (II) input device 'Power Button', /dev/input/event2 is tagged by udev as: Keyboard
[ 4792.387] (II) input device 'Power Button', /dev/input/event2 is a keyboard
[ 4792.399] (**) Option "config_info" "udev:/sys/devices/LNXSYSTM:00/LNXPWRBN:00/input/input2/event2"
[ 4792.399] (II) XINPUT: Adding extended input device "Power Button" (type: KEYBOARD, id 6)
[ 4792.399] (**) Option "xkb_model" "pc104"
[ 4792.399] (**) Option "xkb_layout" "us,ru"
[ 4792.399] (**) Option "xkb_options" "caps:swapescape,grp:toggle"
[ 4792.432] (II) input device 'Power Button', /dev/input/event2 is tagged by udev as: Keyboard
[ 4792.432] (II) input device 'Power Button', /dev/input/event2 is a keyboard
[ 4792.432] (II) config/udev: Adding input device Power Button (/dev/input/event1)
[ 4792.432] (**) Power Button: Applying InputClass "evdev keyboard catchall"
[ 4792.432] (**) Power Button: Applying InputClass "libinput keyboard catchall"
[ 4792.432] (**) Power Button: Applying InputClass "system-keyboard"
[ 4792.432] (II) Using input driver 'libinput' for 'Power Button'
[ 4792.432] (**) Power Button: always reports core events
[ 4792.432] (**) Option "Device" "/dev/input/event1"
[ 4792.433] (II) input device 'Power Button', /dev/input/event1 is tagged by udev as: Keyboard
[ 4792.433] (II) input device 'Power Button', /dev/input/event1 is a keyboard
[ 4792.489] (**) Option "config_info" "udev:/sys/devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0C:00/input/input1/event1"
[ 4792.489] (II) XINPUT: Adding extended input device "Power Button" (type: KEYBOARD, id 7)
[ 4792.489] (**) Option "xkb_model" "pc104"
[ 4792.489] (**) Option "xkb_layout" "us,ru"
[ 4792.489] (**) Option "xkb_options" "caps:swapescape,grp:toggle"
[ 4792.490] (II) input device 'Power Button', /dev/input/event1 is tagged by udev as: Keyboard
[ 4792.490] (II) input device 'Power Button', /dev/input/event1 is a keyboard
[ 4792.490] (II) config/udev: Adding input device HDA NVidia HDMI/DP,pcm=3 (/dev/input/event0)
[ 4792.490] (II) No input driver specified, ignoring this device.
[ 4792.490] (II) This device may have been added with another device file.
[ 4792.490] (II) config/udev: Adding input device HDA NVidia HDMI/DP,pcm=7 (/dev/input/event17)
[ 4792.490] (II) No input driver specified, ignoring this device.
[ 4792.490] (II) This device may have been added with another device file.
[ 4792.490] (II) config/udev: Adding input device HDA NVidia HDMI/DP,pcm=8 (/dev/input/event18)
[ 4792.490] (II) No input driver specified, ignoring this device.
[ 4792.490] (II) This device may have been added with another device file.
[ 4792.491] (II) config/udev: Adding input device HDA NVidia HDMI/DP,pcm=9 (/dev/input/event19)
[ 4792.491] (II) No input driver specified, ignoring this device.
[ 4792.491] (II) This device may have been added with another device file.
[ 4792.491] (II) config/udev: Adding input device Microsoft Microsoft® 2.4GHz Transceiver v8.0 (/dev/input/event3)
[ 4792.491] (**) Microsoft Microsoft® 2.4GHz Transceiver v8.0: Applying InputClass "evdev keyboard catchall"
[ 4792.491] (**) Microsoft Microsoft® 2.4GHz Transceiver v8.0: Applying InputClass "libinput keyboard catchall"
[ 4792.491] (**) Microsoft Microsoft® 2.4GHz Transceiver v8.0: Applying InputClass "system-keyboard"
[ 4792.491] (II) Using input driver 'libinput' for 'Microsoft Microsoft® 2.4GHz Transceiver v8.0'
[ 4792.491] (**) Microsoft Microsoft® 2.4GHz Transceiver v8.0: always reports core events
[ 4792.491] (**) Option "Device" "/dev/input/event3"
[ 4792.491] (II) input device 'Microsoft Microsoft® 2.4GHz Transceiver v8.0', /dev/input/event3 is tagged by udev as: Keyboard
[ 4792.491] (II) input device 'Microsoft Microsoft® 2.4GHz Transceiver v8.0', /dev/input/event3 is a keyboard
[ 4792.554] (**) Option "config_info" "udev:/sys/devices/pci0000:00/0000:00:1a.0/usb1/1-1/1-1.1/1-1.1:1.0/0003:045E:07B2.0004/input/input24/event3"
[ 4792.554] (II) XINPUT: Adding extended input device "Microsoft Microsoft® 2.4GHz Transceiver v8.0" (type: KEYBOARD, id 8)
[ 4792.554] (**) Option "xkb_model" "pc104"
[ 4792.554] (**) Option "xkb_layout" "us,ru"
[ 4792.554] (**) Option "xkb_options" "caps:swapescape,grp:toggle"
[ 4792.554] (II) input device 'Microsoft Microsoft® 2.4GHz Transceiver v8.0', /dev/input/event3 is tagged by udev as: Keyboard
[ 4792.554] (II) input device 'Microsoft Microsoft® 2.4GHz Transceiver v8.0', /dev/input/event3 is a keyboard
[ 4792.555] (II) config/udev: Adding input device Microsoft Microsoft® 2.4GHz Transceiver v8.0 (/dev/input/event4)
[ 4792.555] (**) Microsoft Microsoft® 2.4GHz Transceiver v8.0: Applying InputClass "evdev pointer catchall"
[ 4792.555] (**) Microsoft Microsoft® 2.4GHz Transceiver v8.0: Applying InputClass "libinput pointer catchall"
[ 4792.555] (II) Using input driver 'libinput' for 'Microsoft Microsoft® 2.4GHz Transceiver v8.0'
[ 4792.555] (**) Microsoft Microsoft® 2.4GHz Transceiver v8.0: always reports core events
[ 4792.555] (**) Option "Device" "/dev/input/event4"
[ 4792.555] (II) input device 'Microsoft Microsoft® 2.4GHz Transceiver v8.0', /dev/input/event4 is tagged by udev as: Mouse
[ 4792.555] (II) input device 'Microsoft Microsoft® 2.4GHz Transceiver v8.0', /dev/input/event4 is a pointer caps
[ 4792.609] (**) Option "config_info" "udev:/sys/devices/pci0000:00/0000:00:1a.0/usb1/1-1/1-1.1/1-1.1:1.1/0003:045E:07B2.0005/input/input25/event4"
[ 4792.610] (II) XINPUT: Adding extended input device "Microsoft Microsoft® 2.4GHz Transceiver v8.0" (type: MOUSE, id 9)
[ 4792.610] (**) Option "AccelerationScheme" "none"
[ 4792.610] (**) Microsoft Microsoft® 2.4GHz Transceiver v8.0: (accel) selected scheme none/0
[ 4792.610] (**) Microsoft Microsoft® 2.4GHz Transceiver v8.0: (accel) acceleration factor: 2.000
[ 4792.610] (**) Microsoft Microsoft® 2.4GHz Transceiver v8.0: (accel) acceleration threshold: 4
[ 4792.610] (II) input device 'Microsoft Microsoft® 2.4GHz Transceiver v8.0', /dev/input/event4 is tagged by udev as: Mouse
[ 4792.610] (II) input device 'Microsoft Microsoft® 2.4GHz Transceiver v8.0', /dev/input/event4 is a pointer caps
[ 4792.610] (II) config/udev: Adding input device Microsoft Microsoft® 2.4GHz Transceiver v8.0 (/dev/input/mouse0)
[ 4792.610] (II) No input driver specified, ignoring this device.
[ 4792.610] (II) This device may have been added with another device file.
[ 4792.611] (II) config/udev: Adding input device Microsoft Microsoft® 2.4GHz Transceiver v8.0 (/dev/input/event5)
[ 4792.611] (**) Microsoft Microsoft® 2.4GHz Transceiver v8.0: Applying InputClass "evdev keyboard catchall"
[ 4792.611] (**) Microsoft Microsoft® 2.4GHz Transceiver v8.0: Applying InputClass "joystick catchall"
[ 4792.611] (**) Microsoft Microsoft® 2.4GHz Transceiver v8.0: Applying InputClass "libinput keyboard catchall"
[ 4792.611] (**) Microsoft Microsoft® 2.4GHz Transceiver v8.0: Applying InputClass "system-keyboard"
[ 4792.611] (II) Using input driver 'libinput' for 'Microsoft Microsoft® 2.4GHz Transceiver v8.0'
[ 4792.611] (**) Microsoft Microsoft® 2.4GHz Transceiver v8.0: always reports core events
[ 4792.611] (**) Option "Device" "/dev/input/event5"
[ 4792.611] (II) input device 'Microsoft Microsoft® 2.4GHz Transceiver v8.0', /dev/input/event5 is tagged by udev as: Keyboard Joystick
[ 4792.611] (II) input device 'Microsoft Microsoft® 2.4GHz Transceiver v8.0', /dev/input/event5 is a keyboard
[ 4792.676] (**) Option "config_info" "udev:/sys/devices/pci0000:00/0000:00:1a.0/usb1/1-1/1-1.1/1-1.1:1.2/0003:045E:07B2.0006/input/input26/event5"
[ 4792.676] (II) XINPUT: Adding extended input device "Microsoft Microsoft® 2.4GHz Transceiver v8.0" (type: KEYBOARD, id 10)
[ 4792.676] (**) Option "xkb_model" "pc104"
[ 4792.676] (**) Option "xkb_layout" "us,ru"
[ 4792.676] (**) Option "xkb_options" "caps:swapescape,grp:toggle"
[ 4792.676] (II) input device 'Microsoft Microsoft® 2.4GHz Transceiver v8.0', /dev/input/event5 is tagged by udev as: Keyboard Joystick
[ 4792.676] (II) input device 'Microsoft Microsoft® 2.4GHz Transceiver v8.0', /dev/input/event5 is a keyboard
[ 4792.677] (II) config/udev: Adding input device Microsoft Microsoft® 2.4GHz Transceiver v8.0 (/dev/input/js0)
[ 4792.677] (**) Microsoft Microsoft® 2.4GHz Transceiver v8.0: Applying InputClass "system-keyboard"
[ 4792.677] (II) No input driver specified, ignoring this device.
[ 4792.677] (II) This device may have been added with another device file.
[ 4792.677] (II) config/udev: Adding input device HDA Intel PCH Front Mic (/dev/input/event7)
[ 4792.677] (II) No input driver specified, ignoring this device.
[ 4792.677] (II) This device may have been added with another device file.
[ 4792.677] (II) config/udev: Adding input device HDA Intel PCH Line (/dev/input/event8)
[ 4792.677] (II) No input driver specified, ignoring this device.
[ 4792.677] (II) This device may have been added with another device file.
[ 4792.677] (II) config/udev: Adding input device HDA Intel PCH Line Out Front (/dev/input/event9)
[ 4792.677] (II) No input driver specified, ignoring this device.
[ 4792.677] (II) This device may have been added with another device file.
[ 4792.678] (II) config/udev: Adding input device HDA Intel PCH Line Out Surround (/dev/input/event10)
[ 4792.678] (II) No input driver specified, ignoring this device.
[ 4792.678] (II) This device may have been added with another device file.
[ 4792.678] (II) config/udev: Adding input device HDA Intel PCH Line Out CLFE (/dev/input/event11)
[ 4792.678] (II) No input driver specified, ignoring this device.
[ 4792.678] (II) This device may have been added with another device file.
[ 4792.678] (II) config/udev: Adding input device HDA Intel PCH Line Out Side (/dev/input/event12)
[ 4792.678] (II) No input driver specified, ignoring this device.
[ 4792.678] (II) This device may have been added with another device file.
[ 4792.678] (II) config/udev: Adding input device HDA Intel PCH Front Headphone (/dev/input/event13)
[ 4792.678] (II) No input driver specified, ignoring this device.
[ 4792.678] (II) This device may have been added with another device file.
[ 4792.678] (II) config/udev: Adding input device HDA Intel PCH HDMI/DP,pcm=7 (/dev/input/event14)
[ 4792.678] (II) No input driver specified, ignoring this device.
[ 4792.678] (II) This device may have been added with another device file.
[ 4792.679] (II) config/udev: Adding input device HDA Intel PCH HDMI/DP,pcm=8 (/dev/input/event15)
[ 4792.679] (II) No input driver specified, ignoring this device.
[ 4792.679] (II) This device may have been added with another device file.
[ 4792.679] (II) config/udev: Adding input device HDA Intel PCH Rear Mic (/dev/input/event6)
[ 4792.679] (II) No input driver specified, ignoring this device.
[ 4792.679] (II) This device may have been added with another device file.
[ 4792.679] (II) config/udev: Adding input device Eee PC WMI hotkeys (/dev/input/event16)
[ 4792.679] (**) Eee PC WMI hotkeys: Applying InputClass "evdev keyboard catchall"
[ 4792.679] (**) Eee PC WMI hotkeys: Applying InputClass "libinput keyboard catchall"
[ 4792.679] (**) Eee PC WMI hotkeys: Applying InputClass "system-keyboard"
[ 4792.679] (II) Using input driver 'libinput' for 'Eee PC WMI hotkeys'
[ 4792.679] (**) Eee PC WMI hotkeys: always reports core events
[ 4792.679] (**) Option "Device" "/dev/input/event16"
[ 4792.679] (II) input device 'Eee PC WMI hotkeys', /dev/input/event16 is tagged by udev as: Keyboard
[ 4792.679] (II) input device 'Eee PC WMI hotkeys', /dev/input/event16 is a keyboard
[ 4792.712] (**) Option "config_info" "udev:/sys/devices/platform/eeepc-wmi/input/input19/event16"
[ 4792.712] (II) XINPUT: Adding extended input device "Eee PC WMI hotkeys" (type: KEYBOARD, id 11)
[ 4792.712] (**) Option "xkb_model" "pc104"
[ 4792.713] (**) Option "xkb_layout" "us,ru"
[ 4792.713] (**) Option "xkb_options" "caps:swapescape,grp:toggle"
[ 4792.713] (II) input device 'Eee PC WMI hotkeys', /dev/input/event16 is tagged by udev as: Keyboard
[ 4792.713] (II) input device 'Eee PC WMI hotkeys', /dev/input/event16 is a keyboard
[ 4793.050] (**) NVIDIA(0): Using HorizSync/VertRefresh ranges from the EDID for display
[ 4793.050] (**) NVIDIA(0): device ViewSonic VG1930wm (DFP-2) (Using EDID frequencies
[ 4793.050] (**) NVIDIA(0): has been enabled on all display devices.)
[ 4793.081] (**) NVIDIA(0): Using HorizSync/VertRefresh ranges from the EDID for display
[ 4793.081] (**) NVIDIA(0): device Samsung SMS27A850 (DFP-0) (Using EDID frequencies
[ 4793.081] (**) NVIDIA(0): has been enabled on all display devices.)
[ 4793.081] (WW) NVIDIA(GPU-0): The EDID for Samsung SMS27A850 (DFP-0) contradicts itself:
[ 4793.081] (WW) NVIDIA(GPU-0): mode "1920x1080" is specified in the EDID; however, the
[ 4793.081] (WW) NVIDIA(GPU-0): EDID's valid VertRefresh range (56.000-75.000 Hz) would
[ 4793.081] (WW) NVIDIA(GPU-0): exclude this mode's VertRefresh (50.0 Hz); ignoring
[ 4793.081] (WW) NVIDIA(GPU-0): VertRefresh check for mode "1920x1080".
[ 4793.081] (WW) NVIDIA(GPU-0): The EDID for Samsung SMS27A850 (DFP-0) contradicts itself:
[ 4793.081] (WW) NVIDIA(GPU-0): mode "1280x720" is specified in the EDID; however, the
[ 4793.081] (WW) NVIDIA(GPU-0): EDID's valid VertRefresh range (56.000-75.000 Hz) would
[ 4793.081] (WW) NVIDIA(GPU-0): exclude this mode's VertRefresh (50.0 Hz); ignoring
[ 4793.081] (WW) NVIDIA(GPU-0): VertRefresh check for mode "1280x720".
[ 4793.081] (WW) NVIDIA(GPU-0): The EDID for Samsung SMS27A850 (DFP-0) contradicts itself:
[ 4793.081] (WW) NVIDIA(GPU-0): mode "720x576" is specified in the EDID; however, the
[ 4793.081] (WW) NVIDIA(GPU-0): EDID's valid VertRefresh range (56.000-75.000 Hz) would
[ 4793.081] (WW) NVIDIA(GPU-0): exclude this mode's VertRefresh (50.0 Hz); ignoring
[ 4793.081] (WW) NVIDIA(GPU-0): VertRefresh check for mode "720x576".
[ 4793.129] (**) NVIDIA(0): Using HorizSync/VertRefresh ranges from the EDID for display
[ 4793.129] (**) NVIDIA(0): device ViewSonic VG1930wm (DFP-2) (Using EDID frequencies
[ 4793.129] (**) NVIDIA(0): has been enabled on all display devices.)
[ 4793.160] (**) NVIDIA(0): Using HorizSync/VertRefresh ranges from the EDID for display
[ 4793.160] (**) NVIDIA(0): device Samsung SMS27A850 (DFP-0) (Using EDID frequencies
[ 4793.160] (**) NVIDIA(0): has been enabled on all display devices.)
[ 4793.160] (WW) NVIDIA(GPU-0): The EDID for Samsung SMS27A850 (DFP-0) contradicts itself:
[ 4793.160] (WW) NVIDIA(GPU-0): mode "1920x1080" is specified in the EDID; however, the
[ 4793.160] (WW) NVIDIA(GPU-0): EDID's valid VertRefresh range (56.000-75.000 Hz) would
[ 4793.160] (WW) NVIDIA(GPU-0): exclude this mode's VertRefresh (50.0 Hz); ignoring
[ 4793.160] (WW) NVIDIA(GPU-0): VertRefresh check for mode "1920x1080".
[ 4793.160] (WW) NVIDIA(GPU-0): The EDID for Samsung SMS27A850 (DFP-0) contradicts itself:
[ 4793.160] (WW) NVIDIA(GPU-0): mode "1280x720" is specified in the EDID; however, the
[ 4793.160] (WW) NVIDIA(GPU-0): EDID's valid VertRefresh range (56.000-75.000 Hz) would
[ 4793.160] (WW) NVIDIA(GPU-0): exclude this mode's VertRefresh (50.0 Hz); ignoring
[ 4793.160] (WW) NVIDIA(GPU-0): VertRefresh check for mode "1280x720".
[ 4793.160] (WW) NVIDIA(GPU-0): The EDID for Samsung SMS27A850 (DFP-0) contradicts itself:
[ 4793.160] (WW) NVIDIA(GPU-0): mode "720x576" is specified in the EDID; however, the
[ 4793.160] (WW) NVIDIA(GPU-0): EDID's valid VertRefresh range (56.000-75.000 Hz) would
[ 4793.160] (WW) NVIDIA(GPU-0): exclude this mode's VertRefresh (50.0 Hz); ignoring
[ 4793.160] (WW) NVIDIA(GPU-0): VertRefresh check for mode "720x576".
[ 4793.229] (**) NVIDIA(0): Using HorizSync/VertRefresh ranges from the EDID for display
[ 4793.229] (**) NVIDIA(0): device ViewSonic VG1930wm (DFP-2) (Using EDID frequencies
[ 4793.229] (**) NVIDIA(0): has been enabled on all display devices.)
[ 4793.259] (**) NVIDIA(0): Using HorizSync/VertRefresh ranges from the EDID for display
[ 4793.259] (**) NVIDIA(0): device Samsung SMS27A850 (DFP-0) (Using EDID frequencies
[ 4793.259] (**) NVIDIA(0): has been enabled on all display devices.)
[ 4793.259] (WW) NVIDIA(GPU-0): The EDID for Samsung SMS27A850 (DFP-0) contradicts itself:
[ 4793.259] (WW) NVIDIA(GPU-0): mode "1920x1080" is specified in the EDID; however, the
[ 4793.259] (WW) NVIDIA(GPU-0): EDID's valid VertRefresh range (56.000-75.000 Hz) would
[ 4793.259] (WW) NVIDIA(GPU-0): exclude this mode's VertRefresh (50.0 Hz); ignoring
[ 4793.259] (WW) NVIDIA(GPU-0): VertRefresh check for mode "1920x1080".
[ 4793.259] (WW) NVIDIA(GPU-0): The EDID for Samsung SMS27A850 (DFP-0) contradicts itself:
[ 4793.259] (WW) NVIDIA(GPU-0): mode "1280x720" is specified in the EDID; however, the
[ 4793.259] (WW) NVIDIA(GPU-0): EDID's valid VertRefresh range (56.000-75.000 Hz) would
[ 4793.259] (WW) NVIDIA(GPU-0): exclude this mode's VertRefresh (50.0 Hz); ignoring
[ 4793.259] (WW) NVIDIA(GPU-0): VertRefresh check for mode "1280x720".
[ 4793.259] (WW) NVIDIA(GPU-0): The EDID for Samsung SMS27A850 (DFP-0) contradicts itself:
[ 4793.259] (WW) NVIDIA(GPU-0): mode "720x576" is specified in the EDID; however, the
[ 4793.259] (WW) NVIDIA(GPU-0): EDID's valid VertRefresh range (56.000-75.000 Hz) would
[ 4793.259] (WW) NVIDIA(GPU-0): exclude this mode's VertRefresh (50.0 Hz); ignoring
[ 4793.259] (WW) NVIDIA(GPU-0): VertRefresh check for mode "720x576".
[ 4849.763] (**) NVIDIA(0): Using HorizSync/VertRefresh ranges from the EDID for display
[ 4849.763] (**) NVIDIA(0): device ViewSonic VG1930wm (DFP-2) (Using EDID frequencies
[ 4849.763] (**) NVIDIA(0): has been enabled on all display devices.)
[ 4849.794] (**) NVIDIA(0): Using HorizSync/VertRefresh ranges from the EDID for display
[ 4849.794] (**) NVIDIA(0): device Samsung SMS27A850 (DFP-0) (Using EDID frequencies
[ 4849.794] (**) NVIDIA(0): has been enabled on all display devices.)
[ 4849.794] (WW) NVIDIA(GPU-0): The EDID for Samsung SMS27A850 (DFP-0) contradicts itself:
[ 4849.794] (WW) NVIDIA(GPU-0): mode "1920x1080" is specified in the EDID; however, the
[ 4849.794] (WW) NVIDIA(GPU-0): EDID's valid VertRefresh range (56.000-75.000 Hz) would
[ 4849.794] (WW) NVIDIA(GPU-0): exclude this mode's VertRefresh (50.0 Hz); ignoring
[ 4849.794] (WW) NVIDIA(GPU-0): VertRefresh check for mode "1920x1080".
[ 4849.795] (WW) NVIDIA(GPU-0): The EDID for Samsung SMS27A850 (DFP-0) contradicts itself:
[ 4849.795] (WW) NVIDIA(GPU-0): mode "1280x720" is specified in the EDID; however, the
[ 4849.795] (WW) NVIDIA(GPU-0): EDID's valid VertRefresh range (56.000-75.000 Hz) would
[ 4849.795] (WW) NVIDIA(GPU-0): exclude this mode's VertRefresh (50.0 Hz); ignoring
[ 4849.795] (WW) NVIDIA(GPU-0): VertRefresh check for mode "1280x720".
[ 4849.795] (WW) NVIDIA(GPU-0): The EDID for Samsung SMS27A850 (DFP-0) contradicts itself:
[ 4849.795] (WW) NVIDIA(GPU-0): mode "720x576" is specified in the EDID; however, the
[ 4849.795] (WW) NVIDIA(GPU-0): EDID's valid VertRefresh range (56.000-75.000 Hz) would
[ 4849.795] (WW) NVIDIA(GPU-0): exclude this mode's VertRefresh (50.0 Hz); ignoring
[ 4849.795] (WW) NVIDIA(GPU-0): VertRefresh check for mode "720x576".
I also tried other configs, but neither of them made me happy:
Section "DRI"
Mode 0666
EndSection
Section "Monitor"
Identifier "SAM"
ModelName "Samsung SMS27A850"
HorizSync 30.0 - 90.0
VertRefresh 56.0 - 75.0
Option "DPMS"
DisplaySize 597 336 # In millimeters
EndSection
Section "Monitor"
Identifier "VS"
ModelName "ViewSonic VG1930wm"
Option "DPMS"
Option "RightOf" "SAM"
Option "Rotate" "left"
EndSection
Section "Monitor"
Identifier "BNQ"
ModelName "BenQ FP737s"
Option "DPMS"
Option "LeftOf" "SAM"
Option "Rotate" "left"
EndSection
Section "Device"
Identifier "nvidia-sam"
Driver "nvidia"
VendorName "NVIDIA Corporation"
BoardName "GeForce GTX 560 Ti"
BusID "01:00:0"
Option "Monitor-DVI-I-1" "SAM"
Screen 0
EndSection
Section "Device"
Identifier "nvidia-vs"
Driver "nvidia"
VendorName "NVIDIA Corporation"
BoardName "GeForce GTX 560 Ti"
BusID "01:00:0"
Option "Monitor-DVI-I-2" "VS"
Screen 1
EndSection
Section "Device"
Identifier "intel"
Driver "modesetting"
Option "AccelMethod" "none"
VendorName "Intel"
BoardName "Intel Integrated Graphic Controller"
BusID "00:02:0"
Option "Monitor-VGA-0" "BNQ"
Screen 2
EndSection
Section "Screen"
Identifier "SAM-Screen"
Device "nvidia-sam"
Monitor "SAM"
#DefaultDepth 24
# Option "Stereo" "0"
# Option "SLI" "Off"
# Option "MultiGPU" "Off"
# Option "BaseMosaic" "off"
#Option "AllowEmptyInitialConfiguration"
# SubSection "Display"
# Depth 24
# EndSubSection
EndSection
Section "Screen"
Identifier "VS-Screen"
Device "nvidia-vs"
Monitor "VS"
#DefaultDepth 24
# Option "Stereo" "0"
# Option "SLI" "Off"
# Option "MultiGPU" "Off"
# Option "BaseMosaic" "off"
#Option "AllowEmptyInitialConfiguration"
# SubSection "Display"
# Depth 24
# EndSubSection
EndSection
Section "Screen"
Identifier "BNQ-Screen"
Device "intel"
Monitor "BNQ"
EndSection
Section "ServerLayout"
Identifier "Layout0"
Screen 0 "SAM-Screen"
Screen 1 "VS-Screen" RightOf "SAM-Screen"
Screen 2 "BNQ-Screen" LeftOf "SAM-Screen"
Option "Xinerama" "0"
EndSection
[ 4488.527]
X.Org X Server 1.17.1
Release Date: 2015-02-10
[ 4488.527] X Protocol Version 11, Revision 0
[ 4488.527] Build Operating System: Linux 3.18.6-1-ARCH x86_64
[ 4488.527] Current Operating System: Linux earth 3.18.6-1-ARCH #1 SMP PREEMPT Sat Feb 7 08:44:05 CET 2015 x86_64
[ 4488.527] Kernel command line: BOOT_IMAGE=/boot/vmlinuz-linux root=UUID=dc49b07c-e67c-4b6f-91f7-7c1adc050e21 rw quiet ipv6.disable=1 init=/usr/lib/systemd/systemd security=tomoyo TOMOYO_trigger=/usr/lib/systemd/systemd
[ 4488.527] Build Date: 22 February 2015 12:50:32PM
[ 4488.527]
[ 4488.527] Current version of pixman: 0.32.6
[ 4488.527] Before reporting problems, check http://wiki.x.org
to make sure that you have the latest version.
[ 4488.527] Markers: (--) probed, (**) from config file, (==) default setting,
(++) from command line, (!!) notice, (II) informational,
(WW) warning, (EE) error, (NI) not implemented, (??) unknown.
[ 4488.527] (==) Log file: "/var/log/Xorg.0.log", Time: Sun Mar 1 14:38:54 2015
[ 4488.527] (==) Using config directory: "/etc/X11/xorg.conf.d"
[ 4488.527] (==) Using system config directory "/usr/share/X11/xorg.conf.d"
[ 4488.528] (==) ServerLayout "Layout0"
[ 4488.528] (**) |-->Screen "SAM-Screen" (0)
[ 4488.528] (**) | |-->Monitor "SAM"
[ 4488.528] (**) | |-->Device "nvidia-sam"
[ 4488.528] (**) |-->Screen "VS-Screen" (1)
[ 4488.528] (**) | |-->Monitor "VS"
[ 4488.528] (**) | |-->Device "nvidia-vs"
[ 4488.528] (**) |-->Screen "BNQ-Screen" (2)
[ 4488.528] (**) | |-->Monitor "BNQ"
[ 4488.528] (**) | |-->Device "intel"
[ 4488.528] (**) Option "Xinerama" "0"
[ 4488.528] (==) Automatically adding devices
[ 4488.528] (==) Automatically enabling devices
[ 4488.528] (==) Automatically adding GPU devices
[ 4488.528] (==) FontPath set to:
/usr/share/fonts/misc/,
/usr/share/fonts/TTF/,
/usr/share/fonts/OTF/,
/usr/share/fonts/Type1/,
/usr/share/fonts/100dpi/,
/usr/share/fonts/75dpi/
[ 4488.528] (==) ModulePath set to "/usr/lib/xorg/modules"
[ 4488.528] (II) The server relies on udev to provide the list of input devices.
If no devices become available, reconfigure udev or disable AutoAddDevices.
[ 4488.528] (II) Loader magic: 0x815d80
[ 4488.528] (II) Module ABI versions:
[ 4488.528] X.Org ANSI C Emulation: 0.4
[ 4488.528] X.Org Video Driver: 19.0
[ 4488.528] X.Org XInput driver : 21.0
[ 4488.528] X.Org Server Extension : 9.0
[ 4488.529] (EE) systemd-logind: failed to get session: PID 32224 does not belong to any known session
[ 4488.530] (II) xfree86: Adding drm device (/dev/dri/card1)
[ 4488.530] (II) xfree86: Adding drm device (/dev/dri/card0)
[ 4488.531] (--) PCI: (0:0:2:0) 8086:0102:1043:84ca rev 9, Mem @ 0xf6400000/4194304, 0xd0000000/268435456, I/O @ 0x0000f000/64
[ 4488.531] (--) PCI:*(0:1:0:0) 10de:1200:10b0:0401 rev 161, Mem @ 0xf4000000/33554432, 0xe0000000/134217728, 0xe8000000/67108864, I/O @ 0x0000e000/128, BIOS @ 0x????????/524288
[ 4488.531] (WW) Open ACPI failed (/var/run/acpid.socket) (No such file or directory)
[ 4488.531] (II) LoadModule: "glx"
[ 4488.531] (II) Loading /usr/lib/xorg/modules/extensions/libglx.so
[ 4488.542] (II) Module glx: vendor="NVIDIA Corporation"
[ 4488.542] compiled for 4.0.2, module version = 1.0.0
[ 4488.542] Module class: X.Org Server Extension
[ 4488.542] (II) NVIDIA GLX Module 346.47 Thu Feb 19 18:09:07 PST 2015
[ 4488.542] (II) LoadModule: "nvidia"
[ 4488.542] (II) Loading /usr/lib/xorg/modules/drivers/nvidia_drv.so
[ 4488.543] (II) Module nvidia: vendor="NVIDIA Corporation"
[ 4488.543] compiled for 4.0.2, module version = 1.0.0
[ 4488.543] Module class: X.Org Video Driver
[ 4488.543] (II) LoadModule: "modesetting"
[ 4488.543] (II) Loading /usr/lib/xorg/modules/drivers/modesetting_drv.so
[ 4488.543] (II) Module modesetting: vendor="X.Org Foundation"
[ 4488.543] compiled for 1.17.1, module version = 1.17.1
[ 4488.543] Module class: X.Org Video Driver
[ 4488.543] ABI class: X.Org Video Driver, version 19.0
[ 4488.543] (II) NVIDIA dlloader X Driver 346.47 Thu Feb 19 17:47:18 PST 2015
[ 4488.543] (II) NVIDIA Unified Driver for all Supported NVIDIA GPUs
[ 4488.543] (II) modesetting: Driver for Modesetting Kernel Drivers: kms
[ 4488.543] (++) using VT number 7
[ 4488.645] (II) Loading sub module "fb"
[ 4488.645] (II) LoadModule: "fb"
[ 4488.645] (II) Loading /usr/lib/xorg/modules/libfb.so
[ 4488.645] (II) Module fb: vendor="X.Org Foundation"
[ 4488.646] compiled for 1.17.1, module version = 1.0.0
[ 4488.646] ABI class: X.Org ANSI C Emulation, version 0.4
[ 4488.646] (II) Loading sub module "wfb"
[ 4488.646] (II) LoadModule: "wfb"
[ 4488.646] (II) Loading /usr/lib/xorg/modules/libwfb.so
[ 4488.646] (II) Module wfb: vendor="X.Org Foundation"
[ 4488.646] compiled for 1.17.1, module version = 1.0.0
[ 4488.646] ABI class: X.Org ANSI C Emulation, version 0.4
[ 4488.646] (II) Loading sub module "ramdac"
[ 4488.646] (II) LoadModule: "ramdac"
[ 4488.646] (II) Module "ramdac" already built-in
[ 4488.647] (II) modeset(2): using drv /dev/dri/card0
[ 4488.647] (II) modeset(G0): using drv /dev/dri/card0
[ 4488.647] (EE) Screen 2 deleted because of no matching config section.
[ 4488.647] (II) UnloadModule: "modesetting"
[ 4488.647] (II) NVIDIA(0): Creating default Display subsection in Screen section
"SAM-Screen" for depth/fbbpp 24/32
[ 4488.647] (==) NVIDIA(0): Depth 24, (==) framebuffer bpp 32
[ 4488.647] (==) NVIDIA(0): RGB weight 888
[ 4488.647] (==) NVIDIA(0): Default visual is TrueColor
[ 4488.647] (==) NVIDIA(0): Using gamma correction (1.0, 1.0, 1.0)
[ 4488.648] (II) NVIDIA(1): Creating default Display subsection in Screen section
"VS-Screen" for depth/fbbpp 24/32
[ 4488.648] (**) NVIDIA(0): Enabling 2D acceleration
[ 4489.049] (II) NVIDIA(GPU-0): Found DRM driver nvidia-drm (20150116)
[ 4489.050] (II) NVIDIA(0): NVIDIA GPU GeForce GTX 560 Ti (GF114) at PCI:1:0:0 (GPU-0)
[ 4489.050] (--) NVIDIA(0): Memory: 1048576 kBytes
[ 4489.050] (--) NVIDIA(0): VideoBIOS: 70.24.21.00.00
[ 4489.050] (II) NVIDIA(0): Detected PCI Express Link width: 16X
[ 4489.082] (--) NVIDIA(0): Valid display device(s) on GeForce GTX 560 Ti at PCI:1:0:0
[ 4489.082] (--) NVIDIA(0): CRT-0
[ 4489.082] (--) NVIDIA(0): CRT-1
[ 4489.082] (--) NVIDIA(0): Samsung SMS27A850 (DFP-0) (boot, connected)
[ 4489.082] (--) NVIDIA(0): DFP-1
[ 4489.082] (--) NVIDIA(0): ViewSonic VG1930wm (DFP-2) (connected)
[ 4489.082] (--) NVIDIA(GPU-0): CRT-0: 400.0 MHz maximum pixel clock
[ 4489.082] (--) NVIDIA(GPU-0): CRT-1: 400.0 MHz maximum pixel clock
[ 4489.082] (--) NVIDIA(0): Samsung SMS27A850 (DFP-0): Internal TMDS
[ 4489.082] (--) NVIDIA(GPU-0): Samsung SMS27A850 (DFP-0): 330.0 MHz maximum pixel clock
[ 4489.082] (--) NVIDIA(0): DFP-1: Internal TMDS
[ 4489.082] (--) NVIDIA(GPU-0): DFP-1: 165.0 MHz maximum pixel clock
[ 4489.082] (--) NVIDIA(0): ViewSonic VG1930wm (DFP-2): Internal TMDS
[ 4489.082] (--) NVIDIA(GPU-0): ViewSonic VG1930wm (DFP-2): 330.0 MHz maximum pixel clock
[ 4489.083] (**) NVIDIA(0): Using HorizSync/VertRefresh ranges from the EDID for display
[ 4489.083] (**) NVIDIA(0): device Samsung SMS27A850 (DFP-0) (Using EDID frequencies
[ 4489.083] (**) NVIDIA(0): has been enabled on all display devices.)
[ 4489.083] (WW) NVIDIA(GPU-0): The EDID for Samsung SMS27A850 (DFP-0) contradicts itself:
[ 4489.083] (WW) NVIDIA(GPU-0): mode "1920x1080" is specified in the EDID; however, the
[ 4489.083] (WW) NVIDIA(GPU-0): EDID's valid VertRefresh range (56.000-75.000 Hz) would
[ 4489.083] (WW) NVIDIA(GPU-0): exclude this mode's VertRefresh (50.0 Hz); ignoring
[ 4489.083] (WW) NVIDIA(GPU-0): VertRefresh check for mode "1920x1080".
[ 4489.083] (WW) NVIDIA(GPU-0): The EDID for Samsung SMS27A850 (DFP-0) contradicts itself:
[ 4489.083] (WW) NVIDIA(GPU-0): mode "1280x720" is specified in the EDID; however, the
[ 4489.083] (WW) NVIDIA(GPU-0): EDID's valid VertRefresh range (56.000-75.000 Hz) would
[ 4489.083] (WW) NVIDIA(GPU-0): exclude this mode's VertRefresh (50.0 Hz); ignoring
[ 4489.083] (WW) NVIDIA(GPU-0): VertRefresh check for mode "1280x720".
[ 4489.083] (WW) NVIDIA(GPU-0): The EDID for Samsung SMS27A850 (DFP-0) contradicts itself:
[ 4489.083] (WW) NVIDIA(GPU-0): mode "720x576" is specified in the EDID; however, the
[ 4489.083] (WW) NVIDIA(GPU-0): EDID's valid VertRefresh range (56.000-75.000 Hz) would
[ 4489.083] (WW) NVIDIA(GPU-0): exclude this mode's VertRefresh (50.0 Hz); ignoring
[ 4489.083] (WW) NVIDIA(GPU-0): VertRefresh check for mode "720x576".
[ 4489.084] (==) NVIDIA(0):
[ 4489.084] (==) NVIDIA(0): No modes were requested; the default mode "nvidia-auto-select"
[ 4489.084] (==) NVIDIA(0): will be used as the requested mode.
[ 4489.084] (==) NVIDIA(0):
[ 4489.084] (II) NVIDIA(0): Validated MetaModes:
[ 4489.084] (II) NVIDIA(0): "DFP-0:nvidia-auto-select"
[ 4489.084] (II) NVIDIA(0): Virtual screen size determined to be 2560 x 1440
[ 4489.113] (--) NVIDIA(0): DPI set to (125, 114); computed from "UseEdidDpi" X config
[ 4489.113] (--) NVIDIA(0): option
[ 4489.114] (==) NVIDIA(1): Depth 24, (==) framebuffer bpp 32
[ 4489.114] (==) NVIDIA(1): RGB weight 888
[ 4489.114] (==) NVIDIA(1): Default visual is TrueColor
[ 4489.114] (==) NVIDIA(1): Using gamma correction (1.0, 1.0, 1.0)
[ 4489.114] (II) NVIDIA(1): NVIDIA GPU GeForce GTX 560 Ti (GF114) at PCI:1:0:0 (GPU-0)
[ 4489.114] (--) NVIDIA(1): Memory: 1048576 kBytes
[ 4489.114] (--) NVIDIA(1): VideoBIOS: 70.24.21.00.00
[ 4489.114] (II) NVIDIA(1): Detected PCI Express Link width: 16X
[ 4489.146] (--) NVIDIA(1): Valid display device(s) on GeForce GTX 560 Ti at PCI:1:0:0
[ 4489.146] (--) NVIDIA(1): CRT-0
[ 4489.146] (--) NVIDIA(1): CRT-1
[ 4489.146] (--) NVIDIA(1): Samsung SMS27A850 (DFP-0) (boot, connected)
[ 4489.146] (--) NVIDIA(1): DFP-1
[ 4489.146] (--) NVIDIA(1): ViewSonic VG1930wm (DFP-2) (connected)
[ 4489.146] (--) NVIDIA(GPU-0): CRT-0: 400.0 MHz maximum pixel clock
[ 4489.146] (--) NVIDIA(GPU-0): CRT-1: 400.0 MHz maximum pixel clock
[ 4489.146] (--) NVIDIA(1): Samsung SMS27A850 (DFP-0): Internal TMDS
[ 4489.146] (--) NVIDIA(GPU-0): Samsung SMS27A850 (DFP-0): 330.0 MHz maximum pixel clock
[ 4489.146] (--) NVIDIA(1): DFP-1: Internal TMDS
[ 4489.146] (--) NVIDIA(GPU-0): DFP-1: 165.0 MHz maximum pixel clock
[ 4489.146] (--) NVIDIA(1): ViewSonic VG1930wm (DFP-2): Internal TMDS
[ 4489.146] (--) NVIDIA(GPU-0): ViewSonic VG1930wm (DFP-2): 330.0 MHz maximum pixel clock
[ 4489.146] (**) NVIDIA(1): Option "Rotate" "left"
[ 4489.146] (**) NVIDIA(1): Using HorizSync/VertRefresh ranges from the EDID for display
[ 4489.146] (**) NVIDIA(1): device ViewSonic VG1930wm (DFP-2) (Using EDID frequencies
[ 4489.146] (**) NVIDIA(1): has been enabled on all display devices.)
[ 4489.147] (==) NVIDIA(1):
[ 4489.147] (==) NVIDIA(1): No modes were requested; the default mode "nvidia-auto-select"
[ 4489.147] (==) NVIDIA(1): will be used as the requested mode.
[ 4489.147] (==) NVIDIA(1):
[ 4489.147] (II) NVIDIA(1): Validated MetaModes:
[ 4489.147] (II) NVIDIA(1): "DFP-2:nvidia-auto-select{Rotation=90}"
[ 4489.147] (II) NVIDIA(1): Virtual screen size determined to be 900 x 1440
[ 4489.150] (--) NVIDIA(1): DPI set to (55, 140); computed from "UseEdidDpi" X config
[ 4489.150] (--) NVIDIA(1): option
[ 4489.150] (EE)
[ 4489.150] (EE) Backtrace:
[ 4489.151] (EE) 0: /usr/lib/xorg-server/Xorg (OsLookupColor+0x119) [0x5949c9]
[ 4489.151] (EE) 1: /usr/lib/libc.so.6 (__restore_rt+0x0) [0x7f64dd88653f]
[ 4489.151] (EE) 2: /usr/lib/xorg-server/Xorg (xf86nameCompare+0x19) [0x4a9159]
[ 4489.151] (EE) 3: /usr/lib/xorg-server/Xorg (xf86findOption+0x2c) [0x4a2c6c]
[ 4489.151] (EE) 4: /usr/lib/xorg-server/Xorg (xf86SetDepthBpp+0x430) [0x4828d0]
[ 4489.151] (EE) 5: /usr/lib/xorg/modules/drivers/modesetting_drv.so (_init+0x25e1) [0x7f64d695aab1]
[ 4489.151] (EE) 6: /usr/lib/xorg-server/Xorg (InitOutput+0xbcc) [0x47b63c]
[ 4489.151] (EE) 7: /usr/lib/xorg-server/Xorg (remove_fs_handlers+0x22a) [0x43c9da]
[ 4489.152] (EE) 8: /usr/lib/libc.so.6 (__libc_start_main+0xf0) [0x7f64dd873800]
[ 4489.152] (EE) 9: /usr/lib/xorg-server/Xorg (_start+0x29) [0x427039]
[ 4489.152] (EE) 10: ? (?+0x29) [0x29]
[ 4489.152] (EE)
[ 4489.152] (EE) Segmentation fault at address 0x231
[ 4489.152] (EE)
Fatal server error:
[ 4489.152] (EE) Caught signal 11 (Segmentation fault). Server aborting
[ 4489.152] (EE)
[ 4489.152] (EE)
Please consult the The X.Org Foundation support
at http://wiki.x.org
for help.
[ 4489.152] (EE) Please also check the log file at "/var/log/Xorg.0.log" for additional information.
[ 4489.152] (EE)
[ 4489.295] (EE) Server terminated with error (1). Closing log file.
Section "DRI"
Mode 0666
EndSection
Section "Monitor"
Identifier "SAM"
ModelName "Samsung SMS27A850"
HorizSync 30.0 - 90.0
VertRefresh 56.0 - 75.0
Option "DPMS"
DisplaySize 597 336 # In millimeters
EndSection
Section "Monitor"
Identifier "VS"
ModelName "ViewSonic VG1930wm"
Option "DPMS"
Option "RightOf" "SAM"
Option "Rotate" "left"
EndSection
Section "Monitor"
Identifier "BNQ"
ModelName "BenQ FP737s"
Option "DPMS"
Option "LeftOf" "SAM"
Option "Rotate" "left"
EndSection
Section "Device"
Identifier "nvidia-sam"
Driver "nvidia"
VendorName "NVIDIA Corporation"
BoardName "GeForce GTX 560 Ti"
BusID "01:00:0"
Option "Monitor-DVI-I-1" "SAM"
Screen 0
EndSection
Section "Device"
Identifier "nvidia-vs"
Driver "nvidia"
VendorName "NVIDIA Corporation"
BoardName "GeForce GTX 560 Ti"
BusID "01:00:0"
Option "Monitor-DVI-I-2" "VS"
Screen 1
EndSection
Section "Device"
Identifier "intel"
Driver "intel"
Option "AccelMethod" "none"
VendorName "Intel"
BoardName "Intel Integrated Graphic Controller"
BusID "00:02:0"
Option "Monitor-VGA-0" "BNQ"
Screen 2
EndSection
Section "Screen"
Identifier "SAM-Screen"
Device "nvidia-sam"
Monitor "SAM"
#DefaultDepth 24
# Option "Stereo" "0"
# Option "SLI" "Off"
# Option "MultiGPU" "Off"
# Option "BaseMosaic" "off"
#Option "AllowEmptyInitialConfiguration"
# SubSection "Display"
# Depth 24
# EndSubSection
EndSection
Section "Screen"
Identifier "VS-Screen"
Device "nvidia-vs"
Monitor "VS"
#DefaultDepth 24
# Option "Stereo" "0"
# Option "SLI" "Off"
# Option "MultiGPU" "Off"
# Option "BaseMosaic" "off"
#Option "AllowEmptyInitialConfiguration"
# SubSection "Display"
# Depth 24
# EndSubSection
EndSection
Section "Screen"
Identifier "BNQ-Screen"
Device "intel"
Monitor "BNQ"
EndSection
SectionHi:
There is a specific order you need to install the graphics drivers for the notebooks with the nvidia/intel graphics.
1. Install the Intel chipset installation utility and reboot. If the one on your notebook's support page doesn't work, use this one.
https://downloadcenter.intel.com/Detail_Desc.aspx?DwnldID=20775&lang=eng&ProdId=816
2. Install the Intel HD graphics driver and reboot. If the one on your notebook's suport page doesn't work, try this one.
https://downloadcenter.intel.com/Detail_Desc.aspx?DwnldID=24348
3. Install the nVidia HD graphics driver and reboot. If the one on your notebook's support page doesn't work, try this one.
http://www.nvidia.com/download/driverResults.aspx/81879/en-us -
Problems with external monitors
Just updated to Maverick. Now when pulggin in the external monitor DVI connector the Macbook monitor goes very dark
Anyone else having this problem? It also happens when I plug in the DVI connector for the DLP projector. Never happen bofore upgrading to MaverickHi be55,
Were you able to resolve this issue?
I just upgraded to Maverick and am facing the same dark screen issue with my Catleap Q270 external monitor.
Maybe you are looking for
-
Error while running the Financial Reporting in Workspace.
Dear Folks I am facing an issue with FR Report in Workspace Hyperion Version : 11.1.1.3 on Windows 2003 64 bit. Problem Description: We are trying to run the FRS reports in workspace and getting an error in a window " Error Details : Error "<?xml ver
-
Do I really need a Macbook Pro over a Macbook Air?
I'll be using a notebook, well...as a notebook. But I'll also be using it in a desktop setup with an external monitor at home (which has become largely how I use notebooks these days). I have an ancient white Macbook currently, which essentially ca
-
Re-installing Adobe Creative Suite 5 Design Standard... but error on update
I reinstall adobe creative suite design standart on a new Workstation with windows 8.1 Installation ok. Not i need to installa update. Here the log file. 10/30/2014 09:38:57 [INFO] PipeThread - Pipe Connected. Waiting for data to come on pipe 10/30/2
-
I'm doing it in Excel, but it's a monstrous job to create hyperlinks to hundreds of photo titles to view them, one, by one, by one. I can't automate it in Excel for mac. I've tried automate and macros, but none will simply: take the selected photo-ti
-
Help please - urgent exam question
I'm having difficulty with the following question for an OU exam: You will now create a method to enable students to make a list of the books they have read, whether they are on the course�s reading list or not. Add an instance method to the class, w