G4 stalls on startup

A few days ago my 867 MHz Powermac started running slowly. I used disk utility to repair permissions and deleted a bunch of files. It seemed to work better for a couple of days. I then checked Activity monitor and everything looked normal.
This morning it slowed down considerably so I rebooted the computer. It was a very very slow reboot and it hangs after the menu bar starts to appear on the screen. The dock is visible and most of the right hand side of the menu bar is visible. The HD and files I had on the desk top are not visible.
Any suggestions?

Hello! You've got directory problems. Try booting
from the install cd and running the repair disk
function. If that doesn't work you'll likely need
DiskWarrior. Tom
I will give that a try and let you know the result.
I ran disk repair and it said “volume check failed” “ 1 volume could not be repaired because of an error” I then tried running Techtool pro 4 and that couldn't fix it. You mentioned diskwarrior. Do you that think that would be more likely to fix it than Techtool pro 4?
Message was edited by: Dave Myers

Similar Messages

Macbook pro stalls during startup

My macbook pro with Yosemite stalls during startup. I've tried Command R and ran disk utility. The disk is ok. I've zapped the RAM but it still stalls about 25% of the way through the startup process.

Reinstalling OS X Without Erasing the Drive
Boot to the Recovery HD: Restart the computer and after the chime press and hold down the COMMAND and R keys until the menu screen appears. Alternatively, restart the computer and after the chime press and hold down the OPTION key until the boot manager screen appears. Select the Recovery HD and click on the downward pointing arrow button.
Reinstalling OS X Without Erasing the Drive
Repair the Hard Drive and Permissions: Upon startup select Disk Utility from the main menu. Repair the Hard Drive and Permissions as follows.
When the recovery menu appears select Disk Utility and press the Continue button. After Disk Utility loads select the Macintosh HD entry from the the left side list. Click on the First Aid tab, then click on the Repair Disk button. If Disk Utility reports any errors that have been fixed, then re-run Repair Disk until no errors are reported. If no errors are reported click on the Repair Permissions button. Wait until the operation completes, then quit Disk Utility and return to the main menu.
Reinstall OS X: Select Reinstall OS X and click on the Continue button.
Note: You will need an active Internet connection. I suggest using Ethernet if possible because it is three times faster than wireless.
Also see:
Reinstall OS X Without Erasing the Drive
Choose the version you have installed now:
OS X Yosemite- Reinstall OS X
Note: You will need an active Internet connection. I suggest using Ethernet
if possible because it is three times faster than wireless.

Mac stalls during startup

My PowerBook currently stalls during startup (a dark grey apple on a light grey bground with a circling sun). I have tried holding down the C key as my Mac starts up and then clicking the hard disk icon and then the right arrow (my Mac just stalls on the grey apple again once I've done this). I have also tried Disk Utility and the Apple Hardware Test. Neither identifies any errors, except when I try to Repair disk permissions Disk Utility reports an Internal Error - 'Disk Utility has lost its connection with the Disk Management Tool and cannot continue'. I have tried restarting the process many times but I always get this same message.
The problem began when I attempted to export a QuickTime movie in QT Pro as an MPEG-4. I attempted to resave the MPEG-4 as a QT movie afterwards. QT then created a gastronomically huge .mov file when I attempted to do this. A file in the region of 32GB! (It should have been less than 1MB). My computer crashed after it told me my hard disk was almost full (there is now only 2.7GB free). This has happened to me before but normally what I can do is restart my Mac and then delete the offending .mov file, however this time I can't even get into my Mac to do this.
I don't want to format my hard disk as I did this only last week after a problem with OS Tiger that I subsequently deleted and reverted back to OS Panther. I have created a lot of work since then that I haven't backed up anywhere else.
If anyone has any ideas I'd be v v grateful
leo

Leo: The procedure you've been using to Repair Disk is exactly right. If you wanted to Repair Permissions, though, you'd have to be able to boot to your hard drive first. Because you're unable to boot to your HD, and yet you mentioned trying to Repair Permissions, I pointed out that under present circumstances that won't be possible. Sorry if my post was confusing.
IF your FireWire hard drive has a bootable OS on it which you'd have to have installed on it or cloned from your internal drive you can boot the PB to that drive. Connect the drive to the PB, turn the drive on, hold down the Option key, select the external drive as the startup voloume, and allow startup to complete. Assuming that the overly-full internal hard drive then mounts on the desktop normally, you should be able to open it up in the Finder, locate the monster file, trash it and empty the trash. This is all academic, though, if there's no bootable OS installed on the external drive which you'll know is true if it doesn't appear as a selectable startup volume when you hold the Option key down at startup.
In that case, it might be wise to look for another Mac to which you could temporarily connect your PB in FireWire Target Disk Mode. You could then trash the monster file by accessing your PB hard drive from the host Mac. This could be accomplished in five minutes at an Apple dealership, using a demo Mac on the showroom floor, if you have no other options and can find a helpful dealer. I propose this option because I don't know where to suggest you look for a bootable CD that allows Finder access, unless you have the hardware, software, and knowhow to burn one. I don't believe I have one myself. I don't need one, because my backup hard drives are all bootable.

Premiere Pro cc is stalling on startup

My Premiere Pro cc is stalling at startup at Loading ExporterQuickTimeHost.bundle.
Has anyone else seen this problem? Is there a solution?

Hi ralfjons1962,
Thanks for contacting Adobe forums,
Please provide the following infromation
What is the OS and version ?
What is the Graphics Card installed on the system ?
How much Ram do you have ?
Do you use any external Hard Drive ?
Regards,
Sandeep

DW CS3 ( Version 9) stalls at startup and is fricking slow

Hi,
I never know what to expect from DW. I used this program since version 3 and basically it kept on getting worse specifically on the Mac.
Anyhow, as I assumed, CS3 on the Mac is probably the worst version as it's slow and buggy and now stalls for about 30 seconds at startup (having that color ball spinning). I deleted almost 50% of my websites from the "Manage Sites..." list and I don't use extensions or any test servers. it just needs to work as a simple HTML/ CSS editor.
Any clues on how to bring this ridicules software to work?
Thanks
Mic

Have you considered cleaning out the design notes? Sounds like it is spending a lot of time on tracking your movements and logging them to the notes...
Mylenium

FCP stalls on startup when loading pluggo audio plug-ins

FCP 5.03 consitently stalls ( i have to manually quit) on startup. I can see that it is loading pluggo audio plugins when this happens. (usually the pluggo bus send plugin) If i temporarily remove the pluggo component from the au plugin folder it starts up ok. another computer i use has pluggo installed and it starts up fine. any advice?
thanks
rocky

I don't worry about it - as long everything finds what it needs and there's no conflicts.
I think once Peak asked me for the location of one of the filters I'd moved - I pointed it to it, then it was happy.
As long as fcp is stable, I'm happy.

My Pismo Stalls at Startup

I have a Powerbook G3/400 Pismo with 512MB RAM running OS X 10.3.9. When I turn on the Powerbook, I get the familiar Apple logo, then the spinning circle, then the screen turns blue, then grey and then the Powerbook just stalls.
But when I boot in safe mode, the Powerbook starts up normally.
Could someone tell me what could be the problem?
Thanks,
Ken

Ken:
Welcome to Apple Discussions.
When you boot into Safe Mode next time, log in, empty that Trash if there is any, then Restart normally.
You can try resetting the PRAM:
1. Shut down the computer.
2. Locate the following keys on the keyboard: Command, Option, P, and R. You will need to hold these keys down simultaneously in step 4.
3. Turn on the computer.
4. Press and hold the Command-Option-P-R keys. You must press this key combination before the gray screen appears.
5. Hold the keys down until the computer restarts and you hear the startup sound for the second time.
6. Release the keys.
Your computer's PRAM and the NVRAM are reset to the default values. The clock settings may be reset to a default date on some models.
Run Repair Disk:
Insert Installer disk and Restart, holding down the "C" key until grey Apple appears.
Go to Installer menu (Panther and earlier) or Utilities menu (Tiger) and launch Disk Utility.
Select your HDD (manufacturer ID) in the left panel.
Select First Aid in the Main panel.
(Check S.M.A.R.T Status of HDD at the bottom of right panel, and report back if it says anything but Verified)
Click Repair Disk on the bottom right.
If DU reports disk does not need repairs quit DU and restart.
If DU reports errors Repair again and again until DU reports disk is repaired.
If DU reports errors it cannot repair you will need to use a utility like Tech Tool Pro or Disk Warrior
If you don't already do so, run regular maintenance procedures. Here are a few links that have ideas and links to resources:
Gullivers's Mac OS X 10.3/10.4: System maintenance
Dr. Smoke's FAQs:
Maintaining OS X
Tuning Mac OS X Performance
Please do post back with further questions, comments, or an update on your situation.
Good luck.
cornelius
Message was edited by: cornelius

Mail stalls on startup.

Ok, have been using mail 2.1 for quite awhile with no problems. Yesterday, it ran into a brick wall. I launch the app, it automatically starts to download my email from my pop account. The spinning circle (not SPOD - the normal progress circle) appears in the mailbox pane, I get ONE message "[email protected]" appears with a 'Message status-Undeliverable" subject, and then the progrma stalls. I left it running for 5 hours, and it never got past this - it never stopped trying to recieve, it just sits there spinning.
I logged in to my mail account (doteasy) using webmail and there are 22 pages of new messages.
When I try and quit mail, the active window goes away, but the app icon doesn't. In other words, the application refuses to quit, however force quit does NOT show it in red/not responding. I can force quit, but that is the only way out.
I moved the .plist to the desktop, and the program gave me the initial screen fine, and was able to quit fine, but of course, I lost all my thousands of archived messages. Not an option. (moved the .plist back, problem returned)
I ran 'repair disk permissions', I ran the weekly/daily/monthly scripts. What other digital chicken bones should I shake rattle and roll to return this program to functionality??

Brian,
Properly done, removing the plist does NOT result in the loss of messages, but you would need to be careful.
With Mail not running, hold down the Shift key while clicking on the Mail icon to launch. Tell us the result of this, as this allows Mail to open without trying to open any particular message or mailbox.
Ernie

IBook stalls on startup

So this started the other day out of the blue. Right now, when I press the power button, I hear nothing for a few seconds, then the fain whirs onto full blast. The screen doesn't turn on, and nothing else happens. Every once (like 20 tries or so) it gets past this and the screen turns on, but this doesn't always boot. It has frozen once while booting, and once while the screen was still all gray.
I have tried resetting the PMU, I have tried booting plugged in with no battery, I have tried booting unplugged with no battery, I tried taking out my extra RAM (it's still out), and I have tried the Mac OS X boot CD. The Boot CD worked once, then it froze a few minutes into operation and I got back to this tirade, and I am unable to eject it by holding down the trackpad button.
basically:
Power is pressed
No startup sound
no video
fan on full blast

Uh oh...
Could be a Logic Board. At any rate it sounds like it may be time for a service call...
Good luck.

MacBook stalling at Startup

Since shutting down my computer yesterday, I have not been able to get to the log in screen. I've done a disk repair with the startup disk. I'm not able to start in safe mode. I did a arcive and install and that did not work. I have not been able to open it in single user mode either. It goes through part of the process and ends with Load of /sbin/launched failed, errno 88
help would be appreciated.

Try resetting Parameter RAM ?
Hold Apple/Option/P/R at start and wait for three chimes before letting go
If that fails; boot from the install DVD and hold down D then run a complete set of Hardware tests

MBP stalls on startup if ethernet is connected

Hi there,
I've a 15" MBP from early 2009 (5,1) running Mountain Lion which is acting flaky, especially on startup. It clocks at 2.4GHz and carries 8GB of RAM.
Specifically, the MBP gets stuck on the grey startup screen with a spinning "wait" graphic if I plug in my ethernet cable. It sometimes happens if I plug in a FW disk or USB device too, but it ALWAYS gets stuck when I plug in the cable.
I've searched around a bit, but this seems to be a relatively obscure issue. Does anyone here have an idea, or better yet, a solution?
Thanks in advance!

If you have more than one user account, these instructions must be carried out as an administrator.
Launch the Console application in any of the following ways:
☞ Enter the first few letters of its name into a Spotlight search. Select it in the results (it should be at the top.)
☞ In the Finder, select Go ▹ Utilities from the menu bar, or press the key combination shift-command-U. The application is in the folder that opens.
☞ Open LaunchPad. Click Utilities, then Console in the icon grid.
Step 1
Make sure the title of the Console window is All Messages. If it isn't, select All Messages from the SYSTEM LOG QUERIES menu on the left. If you don't see that menu, select
View ▹ Show Log List
from the menu bar.
Enter "BOOT_TIME" (without the quotes) in the search box. Note the timestamps of those log messages, which refer to the times when the system was booted. Now clear the search box and scroll back in the log to the last boot time when you had the problem. Select the messages logged after the boot, during the time something abnormal was happening. Copy them to the Clipboard (command-C). Paste into a reply to this message (command-V).
For example, if the problem is a slow startup taking three minutes, post the messages timestamped within three minutes after the boot time, not before. Please include the BOOT_TIME message at the beginning of the log extract.
If there are runs of repeated messages, post only one example of each. Don’t post many repetitions of the same message.
When posting a log extract, be selective. In most cases, a few dozen lines are more than enough.
Please do not indiscriminately dump thousands of lines from the log into this discussion.
Important: Some private information, such as your name, may appear in the log. Anonymize before posting.
Step 2
Still in Console, look under System Diagnostic Reports for crash or panic logs, and post the entire contents of the most recent one, if any. In the interest of privacy, I suggest you edit out the “Anonymous UUID,” a long string of letters, numbers, and dashes in the header of the report, if present (it may not be.) Please don’t post shutdownStall, spin, or hang logs — they're very long and not helpful.

DVDSP4 stalls on startup splash window

Has anyone else run into this issue? I start the application and the splash page comes up and then it just sits there. I've walked away, thinking maybe it's just taking a while to start up (as it sometimes will) and come back 30 minutes later and it's still not opening a project. I go to the dock and control click to force quit and it doesn't say that the program is not responding. Any ideas?

So, I went into my admin account and looked at more of my console logs and found this from today:
2009-02-11 16:15:28.307 DVD Studio Pro[347] * -[NSCFArray objectAtIndex:]: index (2) beyond bounds (2)
2009-02-11 16:15:50.901 DVD Studio Pro[347] -[DSPXInspectorMainCategoryViewModule loadWindow]: failed to load window nib file 'DSPXInspectorBaseViewModule'.
2009-02-11 16:16:05.846 DVD Studio Pro[347] -[DSPXThemeViewModule loadWindow]: failed to load window nib file 'DSPXThemeViewModule'.
2009-02-11 16:16:05.847 DVD Studio Pro[347] -[DSPXStyleViewModule loadWindow]: failed to load window nib file 'DSPXStyleViewModule'.
2009-02-11 16:16:05.847 DVD Studio Pro[347] -[DSPXShapeViewModule loadWindow]: failed to load window nib file 'DSPXShapeViewModule'.
2009-02-11 16:17:09.590 DVD Studio Pro[364] no localization for TemplateCacheNameKey in Templates
2009-02-11 16:17:09.590 DVD Studio Pro[364] no localization for DefaultName in Templates
2009-02-11 16:17:09.598 DVD Studio Pro[364] TSAssert: <TSAssertionToLog>
Function: -[DSPXWorkspaceTemplateManager directoryForCategory:]
File: /SourceCache/DSP/DSP-431.25/DSPInterface/Templates/DSPXWorkspaceTemplateManager .m
Line: 181
It's actually saying that these window nibs failed to load. Is there some way from the information given for me to figure out WHY they failed to load.

Safari stalls on Startup

Portions of my question have been covered in other topics, but I thought it was worth asking if anyone had encountered (and hopefully resolved) the specific issue I'm having. It's simple, really: Safari is taking a long time (about a minute) to load the first page after I open it. After that, it works fine, but the initial delay is annoying. I've tried cleaning out all the prefs, resetting Safari, emptying out InputManager Plugins and other add-ons (SIMBL, SafariStand, etc.), even regular plugins like Flash, Flip4Mac, etc. I'm running 10.4.11 with Safari 3.04, and I've done every update as it has come along. Any thoughts?

Any thoughts?
This is a long-shot. Maybe it's a fonts cache problem - give it a try.
Quit all open applications.
Delete your fonts caches with FontNuke +(or with whatever utility you normally use)+
FontNuke <http://www.jamapi.com/pr/fn/>
Restart your Mac.
Good luck,
Tom

Media Encoder Stalls on Start Up on Mac

When I open Media Encoder the application stalls on startup. It stalls at point where screen images states 'Loading Exporter QuickTime Host.bundle.'
I have AME version 5.5.1.12
I have Mac OSX v 10.7.4 running on MacPro 2.66 ghz quad core intl xeon.
The application was running without a problem until today. I haven't installed anything new on the computer lately.
Any help would be greatly appreciated. Thanks.

Can you trash you prefs then?
Go to "~/Library/Preferences/Adobe" directory and delete both "Common" and "Adobe Media Encoder" directories.
Note that this will delete all of your custom presets so make a backup if you value them.

FCP Won't Startup Without External Hard Drive

I tried posting something about this earlier, but I don't think I titled or explained myself well.
I cannot get FCP to startup unless my external hard drive is running and mounted. This is happening on 2 different computer with different drives (1 is firewire 800, the other and eSATA minitower). With the drives off, FCP stalls on startup and I have to force quit it and sometimes 2 other identical applications titled the same: MultiMediaImporter.
After the drive is turned on the FCP opens to a new, untitled project and works normal. I can unmount the external drive and run FCP as normal as well.
I can't open any past project until that drive is up and running. I have some projects that contain no media on the external drives, and other projects that do. The only thing that is stored on these external drives is P2 media that I have imported into the FCP projects via XML.
I don't know what else to post, I'd add the problem report, but each computer seems to be stalling out at different points on boot up. However, those positions are strange, one being CoreGraphics the other on FamilyControls.
Oh, and I have tried deleting the prefs. No help at all.
I appreciate any ideas. Thanks

From the FCP menu bar: Final Cut Pro > System Settings > Scratch Disks.
What drives are set to be used as Scratch Disks? If those two externals are included in the list FCP will always look for them. As it will if the project file contains pointers to media that it expects to find on those disks, even if the media is no longer there.
You need to open each project, reconnect the media to the location where it actually is and save the project with that updated information.
Did I mention that it is not a good idea to keep FCP media on your system drive?

G4 stalls on startup

Similar Messages

Maybe you are looking for