G4 Ti4200-TD8X, need to remove fan + freezing

Hihi..
I need to remove the fan on my GFX, but I don't know how - since I can't find something which looks like a screw, only some black rubber thingies which appears to go through the fan and all the way onto the back plating.
But I want to know how to remove it.
I also have a problem with freezing up.
It appears like overheating - but after reading a few threads on this board, I'm not really sure. Also looking upon the amount of cooling within my case, I can't see how it possible can be overheating.
My system specs are :
ECS K7S5A ATX motherboard.
AMD Athlon XP 2.2Ghz
640 SD PC133 rams (Noname)
MSI Geforce 4 ti4200 agp 8x 128DDR's (Running with agp 4x
400Hz PSU
Thermal take Silent Viking II (80x80 Fan)
Thermal Take Technology ThermalCase MidiTower (4 80x80(Metric) Fans, two backside, two frontside)
IRQ : (Only listing PCI)
5. Creative AudioPCI (ES1371, ES1371) (WDM)
5. MSI MS-Starforce GeForce4 Ti 4200 with AGP8X (NVIDIA GeForce4 Ti 4200 with AGP8X)
5. Realtek RTL8139 Family PCI Fast Ethernet NIC
5. SiS 7001 PCI to USB Open Host Controller
11. Multimedia Audio Controller                           (It is disabled)
11. SiS 900-Based PCI Fast Ethernet Adapter
12 SiS 7001 PCI to USB Open Host Controller
Please help.
~x~ Janine ~x~

Well I changed my cards around abit and ended up with an IRQ setting like this :
5. MSI MS-Starforce GeForce 4 Ti 4200 with AGP8X
5. SIS 7001 PCI to USB Open Host Controller
11. Creative AudioPCI
11. Realtek RTL8139 Family PCI Fast ethernet NIC #2
11. SiS-900 PCI fast ethernet adapter
12. SIS 7001 PCI to USB Open Host Controller
Now the problem within #5 - is that "SIS 7001 PCI to USB Open Host Controller" appears to be my USB ports, which are onboard and I can't just move them around like my Netcard and soundcard - my GFX I can't move either, since I only have one AGP slot.
It still does the same freeze up however.
Also, I would really like to know how to remove the fan on the GFX, since I can't really clean it properly if I do not remove it. (It's a little dusty, and it will decrease heating if I get it cleaned properly)
~x~ Janine ~x~

Similar Messages

  • Ti4200-TD8X fan stop spinning suddenly! pls help

    WHAT utility to check the temperature of my vga card? i had the TI 4200-8X as well and the fan stop spinning too... i m using a ICUTE MODEL atx-375wp4 POWER SUPPLY
    the warranty is over by just half a year
    i m using a Ti4200-TD8X 128 RAM
    the one orange color heat sink...

    there are many aftermarket replacement coolers you can buy
    you need a spinning fan on a gf4

  • TI4200 TD8x freeze when booting

    I have almost tried everything. Installed os 6 times and at last upgrade to ME, but still i got stop when i booting the system, this happen after i have installed the ndivas driver for the viedo Card. It seems that windows dosn't like the agp driver. When i have å clean installation the system are booting. The display are then in standard resolution. Cant change that. Then i intal the drivers for the card and after rebooting it go in hang.
    I have:
    Abit kd7-G motherboard socket A
    Via chipset VIAKT400
    AMD athlon XP 2400 2,0 GHz
    DDR dim 512
    Vidocard
    MSI TI4200 TD8X
    ndiva geforce4

    IRQ wtch i can see when booting is
    Network ctrl   11
    Usb 1.0/11 Uhci 10
    Usb 1.0/1.1 Uhci 11
    Usb 1,0 Uhci     5
    USB 2.0          11
    IDE cntrl        14
    Display Cntrl    10
    Acpi cntrl.      9
    Powersuply are marked with 230W with total output 120W
    I did think about the power so i took out a power from a another pC with a 300W , still the same problem, so i swithed it back to the orginal power. What should the outputpower bee??? I cant find anything about that.
    The pc is know running in standard mode with the agp card. At one i go in setting for the card and change the resolution and reboot it teels me that i have some mitc match vid the driver and the vieocard. Then i have to push OK button and the pc stop working. Then i go in to safemodus and sett it back to standar and reboot the system and it work. It little strange because some times when i tried to change the resolution it start windows again and then it work ok until i turn pc of and on again i then have the same problem.
    Quote
    Originally posted by Deathstalker
    pepita,
    What are the specs on your Power Supply, and also please list all your IRQs and every device on each IRQ.
    Take Care,
    Richard

  • GTX 670 PE OC - need BIOS with reduced dust removal fan speed

    Hi,
    I'm looking for someone who will be pleased to reduce or stop dust removal fan speed after restart.
    Would like to modify latest BIOS with UEFI support.
    There was a BIOS which was removed from German MSI site.
    I can provide it if necessary.
    I'm willing to give some reward for the effort.
    Thanks.

    Quote from: Svet on 08-October-12, 20:02:39
    Oki, reflash to attached VBIOS.
    [boot from bootable USB key to perform the flash]
    Flashed and now much quieter at boot.
    Many thanks for your help Svet, you guys are amazing. 

  • Definitive fix for revving fans/freeze?

    Is there a definitive fix for the revving fan & freeze issues in the early edition G5s (dual 2Ghz)? Also, does the above mention problem have any relation to the defective video cards in the same machines? -- no video signal on cold starts. card needs to be warmed w/ a hairdryer before startup!
    15' 125Ghz pBook / Dual 2Ghz G5 / mini    

    Hi
    Dont know if this will help you but I had a problem of high revving noisy fans, then it wouldn't power up. I sent it away and the said it was due to a little white strip fixed on the bottom end of the cover, which apparently effects the air flow. It was starting to curl up, it was straightened out and the fans are now very very quiet and I have had no bother since, including powering up

  • Ti4200-TD8X ms-8894 & won't boot

    I installed a new Ti4200-TD8X (MS-8894), and could not get the system to boot, nor was there any display of any kind.  The system just beeps once about every 8-9 sec.  I put the old G3 Ti200 back in and it works fine.
    Soyo K7V Dragon Plus with Athlon 2100XP
    VIA KT266A chipset
    Win2000 sp3

    chances are you need a better psu
    combined watts over 200
    antecs over 400 watt fit the bill fine

  • I will give my laptop to someone else, how do I unlink my apple id? Do I need to remove the apps I downloaded with my id?

    I will give my laptop to someone else, how do I unlink my apple id? Is it just the app store unlink? Do I need to remove the apps I downloaded with my id? Will they get removed when I unlink my apple id?
    Are there any other procedures I need to take into account?
    Thanks

    You need to remove all software that you acquired from the Mac App Store, including newer versions of OS X. These are all registered to you and encoded with your Apple ID in the licensed copy. You cannot legally pass any of the software to the new owner, which is why Apple states to erase the Mac and return it to the version of OS X that shipped from the factory on the Mac. You must also remove any older Apple software that you installed by DVD or pass the DVD to the new owner with the Mac.

  • Need to remove space for a field when displayed in ALV Report

    Hi,
    I have material field of length 18, but the content is only 10 char. I need to remove the extra space when it is displayed on ALV Report.
    Is there any option in ALV field catalogue

    use statement condense.
    condense zmatnr.
    also giv output lenth of alv column as 10.

  • Need to REMOVE Apple ID account from previously owned iMac

    I recently purchased a previously owned iMac and need to REMOVE its previous Apple ID account to remove apps that they obviously purchased. Can this be done? I am being prompted to update these apps and when I try, I am asked to enter this OLD account. I actually want to REMOVE these apps for I have zero interest in them. The system was supposedly wiped of all previous info from previous owner but I guess they over-looked the apps.
    Can someone advise and give me a step by step break down on how to do this? Remember, I have my own Apple ID but the apps were downloaded from a previous Apple ID account that is NOT mine but was on this system.
    Thanks

    And thanks to you, HW.
    I see you got one quick answer.  But you need more.  
    Leave it until your post sinks near the bottom of the list then revive it by writing to your own post ... say, 'can anyone add to these answers?'   It's Sunday morning!

  • How do you remove a device off of an Apple ID? I have an I pod and an I phone hooked up to the same account need to remove the I pod and start up his own apple account.

    I have an iPod and iPhone connected to my apple account. I need to remove the iPod as it receives all my text messages. I want to sign him up with his own account and not use mine. 

    Yes, that erases everything from the iPod.
    He can redownload his purchases by:
    Downloading past purchases from the App Store, iBookstore, and iTunes Store

  • Hi Support, how can I install photoshop again after disk failure. Still says I have 2 copies installed, need to remove one from my old pc.  Thanks for any help.

    After drive failure, I decided to install photoshopcc on my home pc.
    when I try to start it, I get the message "already installed on 2 devices"
    I need to remove it from one of those devices.
    It's not obvious how to do this.
    Thanks in advance for any help

    On one of your older PCs, Start Photoshop, go to the  Help menu > Deactivate...
    This is a forum of users like yourself volunteering our time to help, we are not Adobe support.
    Gene

  • Removed authorization on old computer, but iTunes still tells me I have 5 authorizations in iTunes on other computers, and I need to remove one before I can auth. my new mac! arrrgh!!

    I'm trying to authorize my new mac in iTunes, but it keeps telling me i need to remove one authorization from another computer.
    I removed the authorization from my old laptop - but it STILL tells me i need to remove one authorization before my new mac can be authorized!! I even removed iTunes on the old computer, but it still doesn't work! What do I do?? I want the music from my iMac to be on my MacBook as well!

    Once a year, you can also perform a step called "deauthorize all computers associated with your Apple ID".  It will clear all 5 authorizations so you can reauthorize the one you want.
    Follow the procedure here: http://support.apple.com/kb/HT1420

  • TS1702 I need to remove one unwanted application from my account totally ( iCloud & Ipad). As my ipad will be handled by my kids Ido not want them to see. Please help me to remove my purchase. thanks.

    I need to remove one purchased app from my iCloud and ipad. Needs  solution
    immediately.

    You cannot delete past purchases from your iTunes account. You should delete it from your iPad and then use Restrictions to stop kids from downloading without the pass code. See http://support.apple.com/kb/ht4213
    You can also hide things from your iTunes account by following these steps http://support.apple.com/kb/HT4919

  • I have two iPhones on my apple account and need to remove one how do I do this? Thanks

    I have two iPhones on my apple account and need to remove one how do I do this? Thanks

    If you are using two iPhones on the same Apple Account by using the same Apple ID you can remove one by following the following:
    Choose Settings > Store and tap Sign out
    The apps and such should remain. If you want to clear all of that you can do the following:
    The Erase all Content and Settings feature under Settings/General/Reset will remove your content and settings. 
    iOS: Understanding 'Erase All Content and Settings'
    http://support.apple.com/kb/ht2110

  • HT204053 i just got a Mac book pro 13....i need to remove my husbands cell number from my iCloud on this device but don't know how

    I just got a Mac book pro 13 ... I need to remove my husbands cell number from this device but dont know how

    Are you sharing the same iCloud account as your daughter?  If so, that would explain why your contacts are merged.  To fix this, you would need to migrate her device(s) to her own iCloud account.  After doing so, you could then delete her contacts from your Mac without effecting the contacts on her device(s).
    As far as messages, do you have your own iPhone?

Maybe you are looking for

  • Forms development in ssp

    Hi all, Im into oracle dba , also i started developing sme reports using reports10g, I want to get started with forms 10g i dnt hav gud exp into pl/sql. any gud link or online video tutorials which cud help in getting started in forms and pl/sql... T

  • Applying keyword to multiple images

    I'm going through many thousands of images applying keywords. The keywords are applied with Option 1, 2, etc. I am finding that if I have more thn ne image selected, hitting option 1 applies the keyword to the first image only. Is this expected bahav

  • Java.lang.NoClassDefFoundError in Runtime Workbench

    Hello, I am getting  java.lang.NoClassDefFoundError: com/sap/aii/rwb/rtcheck/rtcserver/Processor error while trying to run Component Monitoring in runtime workbench. Please advise!! Thanks a lot Edited by: Chanakya Sharma on Jun 13, 2010 9:47 AM

  • Oracle 9.2 e forms6i

    Hi to all, I have DB oracle 9.2 on windows 2003 end now I need to install a client di forms6i (only runtime) but I can't. I can install forms on a new oracle home but when execute a forms it doesn't work because it don't see the forms60_path variable

  • Swf for web banner ad

    I'm trying to design a banner ad of 200 by 200 px and it's supposed to be 50k or less. I've seen swf ads on various news sites where the will get larger when you mouse over. I'd like to mouse over and have the ad displayed as 240 x 430. Additionally,