G4 with 10.2.1 (or maybe 10.3.9) won't start after software upgrade
A little history...bought this PowerBook G4 new from Fry's (no + testimonials will be provided!!!). Since machine was floor model they did a clean install of 10.2.1. Discs they gave me were not the same OS version, however. The computer did work until an out-of-the-blue Kernel crash a year later while on vacation (suddenly wouldn't recognize anything USB). Fry's sent it to Apple. It was returned with 10.3.9 on it and 10.2.7 disk. When I upgraded my scanner software (w/o trashing the previous version of the software which was for system 9.2), the computer worked until I turned it off. I've since purchased $129 Disk Genius, tried every command-S, option key, fsck -fy, reset the PRAM and, who knows what else). When I had the Disk Genius in I was able to go into the disk utility and repair the permissions,etc. Then I guess I did the ultimate no-no...tried to reinstall a lower system than was now on the computer (since the only disk I had was for 10.2). The computer, through all of this starts up (well, not really)...it chimes...and then the little dial (not rainbow one) just goes around and around and around. Any ideas anyone? Thanks so much!
PowerBook G4 15" 1GHZ Mac OS X (10.3.9)
Hi, 411Shirley - 10.2.7 was a transitional software release from early October, 2003 that only shipped with three Mac models I am aware of: the 1 GHz 15" PowerBook; the 1.33GHz 17" PowerBook and a particular G5 tower. The machines that shipped with this version of OS X cannot boot from any earlier versions of the OS, and this version of OS X was not available to users of other Mac models. These users could only update from 10.2.6 to 10.2.8.
The 15" Aluminum PowerBook looks like this:
There was also a 15" 1GHz Titanium PowerBook (TiBook) which looked like this:
The TiBook was a dual-boot machine. That means that it could be booted into both OS 9 and OS X. It shipped with OS 9.2.1 and OS 10.2 preinstalled.
If the machine you bought came with 10.2.1 preinstalled, then you have a TiBook, and this machine cannot run 10.2.7. You will be able to install a system from the original disc(s), and upgrade to 10.2.8, however.
To reinstall 10.2.1 (or whatever version of OS X is contained on the original discs that came with your computer), you will need to boot from that disc, erase and reformat your hard drive and install 10.2.1. You will not be able to install OS X 10.3 or OS X 10.4 without purchasing them as retail packages.
See:
http://docs.info.apple.com/article.html?artnum=25404
http://docs.info.apple.com/article.html?artnum=25567
http://docs.info.apple.com/article.html?artnum=107120
Good luck!
Tuttle
Similar Messages
-
HI I have a problem with my Firefox, recently my fire fox won't start after I click on its Icon, when I see the process in task manager Firefox is there but after a second it will end processing automatically, I have tried ff7 and ff6 and have the same problem, even re installing the Firefox doesn't fix the problem, any one know the reason? I'm using a win7 64bit, and bitdefender internet security
Hi All,
This is not a virus . I used this website & I found it very useful & you can remove it through the following steps.ar.hao123.com 1- Then right-clicking on the icon Mozilla Firefox on the desktop, then choose "Properties", as shown in the picture: 2- Select Tab "shortcut", and then delete the text after. Exe in "target" as shown in the following picture, then press "Ok" 3- Open Firefox, and then choose "options" from the list of "tools" 4- Select the tab "general", and in the list "when Firefox starts" then select "show my homepage" and in the box "homepage" then enter any other link and then press "OK"
you can visit [http://ar.hao123.com/report/ar-feedback.html Hao123] hao123
ar.hao123.com -
Firefox 12 won't start after upgrade from 3.6 in Windows XP with SP3
When I start up firefox after an upgrade to 12 on my Windows XP with SP3 I see the firefox.exe process in Window's Task Manager but it never starts i.e. I never see a browser page. If I try to start it again I get an error message that it is already running.
I have rebooted and even uninstalled/reinstalled Firefox but no browser appears.
Is it possible for my to download the version I had (3.6) and I can just live with that or is there a work-around to get Firefox 12 to work on my desktop?
ThanksWell I was able to run the profile creator one time (firefox.exe -p) and I created a profile with it but still not able to start firefox. So I tried to start it again after rebooting. It starts a process which I can see in Task Manager but now I don't get either the Profile Manager dialog box or FF.
I also tried to start the profile manager with this command: "C:\Program Files\Mozilla Firefox\firefox.exe" -p.
I terminated the firefox process and tried again but get the same results.
BTW, this command: %APPDATA%\MOZILLA\FIREFOX\PROFILES shows a profile called m6woxz30.default, which is not the name I choice for my profile the one time I got the Profile Manager to run.
BTW, thanks for your help and ideas. -
SP1 for Exchange 2013 install failed on me with ECP virtual directory issues:
Error:
The following error was generated when "$error.Clear();
$BEVdirIdentity = $RoleNetBIOSName + "\ecp (name)";
$be = get-EcpVirtualDirectory -ShowMailboxVirtualDirectories -Identity $BEVdirIdentity -DomainController $RoleDomainController -ErrorAction SilentlyContinue;
if ($be -eq $null)
new-EcpVirtualDirectory -Role Mailbox -WebSiteName "name" -DomainController $RoleDomainController;
set-EcpVirtualdirectory -Identity $BEVdirIdentity -FormsAuthentication:$false -WindowsAuthentication:$true;
set-EcpVirtualdirectory -Identity $BEVdirIdentity -InternalUrl $null -ExternalUrl $null;
. "$RoleInstallPath\Scripts\Update-AppPoolManagedFrameworkVersion.ps1" -AppPoolName:"MSExchangeECPAppPool" -Version:"v4.0";
" was run: "The virtual directory 'ecp' already exists under 'server/name'.
Parameter name: VirtualDirectoryName".
Error:
The following error was generated when "$error.Clear();
$BEVdirIdentity = $RoleNetBIOSName + "\ECP (name)";
$be = get-EcpVirtualDirectory -ShowMailboxVirtualDirectories -Identity $BEVdirIdentity -DomainController $RoleDomainController -ErrorAction SilentlyContinue;
if ($be -eq $null)
new-EcpVirtualDirectory -Role Mailbox -WebSiteName "name" -DomainController $RoleDomainController;
set-EcpVirtualdirectory -Identity $BEVdirIdentity -FormsAuthentication:$false -WindowsAuthentication:$true;
set-EcpVirtualdirectory -Identity $BEVdirIdentity -InternalUrl $null -ExternalUrl $null;
. "$RoleInstallPath\Scripts\Update-AppPoolManagedFrameworkVersion.ps1" -AppPoolName:"MSExchangeECPAppPool" -Version:"v4.0";
" was run: "The operation couldn't be performed because object 'server\ECP (name)' couldn't be found on 'DC0xx.domain.com'.".
Error:
The following error was generated when "$error.Clear();
$BEVdirIdentity = $RoleNetBIOSName + "\ECP (name)";
$be = get-EcpVirtualDirectory -ShowMailboxVirtualDirectories -Identity $BEVdirIdentity -DomainController $RoleDomainController -ErrorAction SilentlyContinue;
if ($be -eq $null)
new-EcpVirtualDirectory -Role Mailbox -WebSiteName "name" -DomainController $RoleDomainController;
set-EcpVirtualdirectory -Identity $BEVdirIdentity -FormsAuthentication:$false -WindowsAuthentication:$true;
set-EcpVirtualdirectory -Identity $BEVdirIdentity -InternalUrl $null -ExternalUrl $null;
. "$RoleInstallPath\Scripts\Update-AppPoolManagedFrameworkVersion.ps1" -AppPoolName:"MSExchangeECPAppPool" -Version:"v4.0";
" was run: "The operation couldn't be performed because object 'server\ECP (name)' couldn't be found on 'DC0xx.domain.com'.".
!! And now transport service won't start and mail is unavailable !!
Any help would be appreciated.
I have removed the ecp site from default site and attempting to rerun SP1 now. I do not have high hopes. :(Hi,
Thanks for your response.
From the error description, you need to manually remove the ECP with IIS manager in both the Default Web Site and the Exchange Back End firstly. And then continue the upgrade to check the result.
Hope this can be helpful to you.
Best regards,
Amy Wang
TechNet Community Support -
Problems with contacts getting deleted after software upgrade!
Somehow, my IPhone 4s had a software upgrade, and it DELETED contacts. Anyone else have a problem with this???? UGH!
I had a thunderbolt before my IPhone, and my contacts were saved to the verizon back up assistant. They are now nowhere to be found!If you were already using iOS 5 where you using the iCloud feature to back up your device? If so, you should be able to retrieve your contacts. If you just upgraded to iOS 5 where you backing up your device on your computer via iTunes? You were advised to complete a backup prior to proceeding with the software update...if you did so then a copy of your back up should be available in iTunes. Try looking at the following link to see if it helps:
http://support.apple.com/kb/ht1414
If you did not do a backup and you were not using iCloud to do backups then you would need re-sync your contacts from another source...did you use a contact manager on your computer (such as Outlook)? If you did then you can retrieve your contacts from there. Try looking at this link to see if it helps. If it is not the correct one you can do a search on that site to find the article that better fits your needs.
http://support.apple.com/kb/PH1674 -
Very disappointed in my LG G2. My screen freezes all the time especially when texting. This started after the update. My husband's phone is doing the same thing. We have done a hard reset, deleted pics and videos to clean up the phone but nothing helps. Any suggestions? Our phones are new.
Lots of Frustration. In some cases the LGG2 is rendered useless even as a phone.
Here is what I did.
Got replacement Phone.
Same problems but I shut down all apps that I purchased even though they worked before KitKat.
Found that If I have both WiFi and LTE Data on at the same time battery chewing stops. Do Not know why.
Then I got 2 CM free utilities. The Clean and Wash utilities. Run them and find the culprits grinding CPU
cycles and running down the battery. Number One is the Verizon Voice Mail service constantly turning on and off
and retrieving data not there. Turn of the extra Voice mail and use the old access with the *6. Unless you have
100 messages a day for business your hosed until this KitKat issue is fixed. Get the CM battery utility.
YOU can see the battery suckers and shut them down when not using automatically.
Start putting back one application at a time you used often and see it they work and if the utilities will tune them
down if they cause problems. The LG will get better but with some limitations.
LG and Verizon have a problem with what was a great phone.turned bad overnight.
whatmorecanyousay -
Help with Adobe Premiere Elements 11 Editor - Won't work after Maverick upgrade
I bought Adobe Elements 11 in March of 2013. It was working fine until upgrading to Maverick. It will not open now. Adobe will not help without a serial number. Apple does not provide serial numbers when you buy directly from the App Store. After 3 hours of trying to unintall and reinstall, no luck. Apple said to call Adobe back, Adobe says to call Apple. Finally just asked Apple to refund me the $85.00. They said said they ‘can’t’ since I’ve ‘had it for so long’ (7 months ?? ). They said the problem was my fault because I didn’t check and make sure Adobe Elements was compatible with Maverick before installing Maverick. I should mention that it states (on the App Store page) that Adobe Elements 11 is "compatible with OS X 10.7.5 or later”. Just wondering if anyone else has experienced this problem and if any kind of resolution was achieved? Again, any help would be greatly appreciated.
TonyYes and no help.
See discussion
Please visit http://www.adobe.com/support/contact if there are more questions for Adobe. Thank you.
General Info
Chat start time Dec 13, 2013 6:52:37 AM EST
Chat end time Dec 13, 2013 7:08:55 AM EST
Duration (actual chatting time) 00:16:18
Operator Vaibhav
Chat Transcript
info: Hi, there are several customer(s) in line ahead of you. We'll be with you as soon as possible. Thank you for your patience.
You might also try our community forums, where experts are online 24/7.
info: You are now chatting with 'Vaibhav'
Vaibhav: Hello. Welcome to Adobe Technical Support.
Vaibhav: Please allow me a moment while I look into your account & verify the details.
Jerry: okay will wait
Vaibhav: Can you elaborate the issue please?
Jerry: I've been trying to open the app, its does not open it give me an error
Vaibhav: Well we are getting many customer with this issue
Vaibhav: premiere elements 11 is not compatible with MAC 10.9
Jerry: okay what are you doing to resolve the problem
Vaibhav: Well if there will be any update we would inform all the customers right now we have send this to engineering
Jerry: A friend of mine was sent a link that allowed them to reinstall the application and they were also given a serial number as well can't you do the same for me I really need to use this application asap
Vaibhav: for this you need to contact customer services or sales
Jerry: I'm not looking into buying a new copy I NEED HELP!!!!!!
Vaibhav: Well we can not help in this case as this version was released before mac 10.9
Vaibhav: and if you want to use it on MAC 10.9 you would need to purchase Premiere Elements 12 and for that need to contact sales
Jerry: It looks like I am not going to get the same help as every one,just no that you've lost a customer in me
Vaibhav: Well there is nothing that we on chat or phone can do in this
Vaibhav: Thank you for contacting Adobe. Good Bye.
info: Your chat transcript will be sent to [email protected] at the end of your chat. -
I updated my OS to mountain lion and since then my mac book pro is virtually useless, seeng pictures, videos, using graphics applications and Iphoto is impossible, the screen goes black, and the system restarts.
This even happens sometimes at login, the login screen appears then the computer crashes and restarts, sometimes more than once, yesterday it even happened 6 times in a row before I was actually able to enter the password and log in.Please read this whole message before doing anything.
This procedure is a diagnostic test. It won’t solve your problem. Don’t be disappointed when you find that nothing has changed after you complete it.
Third-party system modifications are a common cause of usability problems. By a “system modification,” I mean software that affects the operation of other software — potentially for the worse. The following procedure will help identify which such modifications you've installed. Don’t be alarmed by the complexity of these instructions — they’re easy to carry out and won’t change anything on your Mac.
These steps are to be taken while booted in “normal” mode, not in safe mode. If you’re now running in safe mode, reboot as usual before continuing.
Below are instructions to enter some UNIX shell commands. The commands are harmless, but they must be entered exactly as given in order to work. If you have doubts about the safety of the procedure suggested here, search this site for other discussions in which it’s been followed without any report of ill effects.
Some of the commands will line-wrap or scroll in your browser, but each one is really just a single line, all of which must be selected. You can accomplish this easily by triple-clicking anywhere in the line. The whole line will highlight, and you can then either copy or drag it. The headings “Step 1” and so on are not part of the commands.
Note: If you have more than one user account, Step 2 must be taken as an administrator. Ordinarily that would be the user created automatically when you booted the system for the first time. The other steps should be taken as the user who has the problem, if different. Most personal Macs have only one user, and in that case this paragraph doesn’t apply.
Launch the Terminal application in any of the following ways:
☞ Enter the first few letters of its name into a Spotlight search. Select it in the results (it should be at the top.)
☞ In the Finder, select Go ▹ Utilities from the menu bar, or press the key combination shift-command-U. The application is in the folder that opens.
☞ Open LaunchPad. Click Utilities, then Terminal in the icon grid.
When you launch Terminal, a text window will open with a line already in it, ending either in a dollar sign (“$”) or a percent sign (“%”). If you get the percent sign, enter “sh” and press return. You should then get a new line ending in a dollar sign.
Step 1
Triple-click the line of text below to select it:
kextstat -kl | awk '!/com\.apple/{printf "%s %s\n", $6, $7}'
Copy (command-C) the selected text to the Clipboard. Then click anywhere in the Terminal window and paste (command-V). Post the lines of output (if any) that appear below what you just entered. You can do that by copy-and-paste as well. Omit the final line ending in “$”. No typing is involved in this step.
Step 2
Repeat with this line:
sudo launchctl list | sed 1d | awk '!/0x|com\.(apple|openssh|vix)|edu\.mit|org\.(amavis|apache|cups|isc|ntp|postfix|x)/{print $3}'
This time, you'll be prompted for your login password, which you do have to type. It won't be displayed when you type it. You may get a one-time warning not to screw up. You don't need to post the warning.
Note: If you don’t have a login password, you’ll need to set one before taking this step. If that’s not possible, skip to the next step.
Step 3
launchctl list | sed 1d | awk '!/0x|com\.apple|edu\.mit|org\.(x|openbsd)/{print $3}'
Step 4
ls -1A /e*/mach* {,/}L*/{Ad,Compon,Ex,Fram,In,Keyb,La,Mail/Bu,P*P,Priv,Qu,Scripti,Servi,Spo,Sta}* L*/Fonts 2> /dev/null
Important: If you formerly synchronized with a MobileMe account, your me.com email address may appear in the output of the above command. If so, anonymize it before posting.
Step 5
osascript -e 'tell application "System Events" to get name of every login item' 2> /dev/null
Remember, steps 1-5 are all copy-and-paste — no typing, except your password. Also remember to post the output.
You can then quit Terminal. -
400 (or maybe 500) Mhz Titanium won't start.
I've adopted an old friend's Ti (of unknown configuration/OS) to see if I can get it to run. (He said he hasn't used it for over a year...but the last time he did use it, it started without a problem.)
I've read all (most) of the discussions about non-starts.
Questions:
1. Can I safely use my 65W 1 GHz Titanium power adapter to start the dead Ti?
2. Can I safely use my 1 GHz Titanium main battery in the dead Ti?
3. Does the 400/500 MHz Ti power adapter have a light on the plug that is supposed to go on (like the newer Ti's)?
At this juncture...I don't know whether the problem is A) the Power Adapter; B) the main battery, and/or; C. the PRAM battery.
(I'm trying the AC Power adapter for 48 hours with the main battery removed solution.)
Last, but unrelated, question: Will the 133 MHz DRAM work in the older (100 MHZ DRAM) Ti? I have 500 MBytes of newer Ti memory sitting here unused (I upgraded the 1GHz Ti to 1 GByte of DRAM).
Thanks.....Hi, John. Yes, you can use the 1GHz Tbook's battery and AC adapter safely with the slower Tibook — they'll work fine. And yes, the old AC adapter is supposed to have a ringlight on its plug. If the adapter works and the light comes on when you connect that adapter to a different Powerbook, the DC-In board in the old PB is faulty and needs to be replaced. If the light doesn't come on with another Powerbook either, the adapter may be faulty. Use the 65W adapter to charge the old Tibook's batteries, then test the older adapter with the machine it belongs to. It's possible that the 45W adapter's light won't come on when it's being used with a Powerbook that expects a 65W adapter — I'm not sure about that.
Assuming that isn't the problem, your internal backup battery is undoubtedly dead after so long. That alone would prevent the Tibook from starting, and recharging it may solve your problem. It won't take 48 hours to do so without any main battery in place; 4-6 hours should do the trick.
PC133 RAM that worked in the 1GHz Tibook should also work fine in the older one. It will operate at PC100 speed. -
Bootcamp with Win' 8 won't start after Yosemite
After installing bootcamp I had to upgrade my windows partition, it worked until I upgraded to Yosemite.
After upgrading and rebooting and clicking alt the windows option didn't even appear.
I tried a couple of tips in the communitie threads and managed to get windows to appear as an option on reboot however I get the message
"missing operating system".
Following Loner T's suggestions I get these results:
diskutil list
MacBook-Pro:~ Ran$ diskutil list
/dev/disk0
#: TYPE NAME SIZE IDENTIFIER
0: GUID_partition_scheme *251.0 GB disk0
1: EFI EFI 209.7 MB disk0s1
2: Apple_CoreStorage 210.0 GB disk0s2
3: Apple_Boot Recovery HD 650.0 MB disk0s3
4: Microsoft Basic Data 30.0 GB disk0s4
/dev/disk1
#: TYPE NAME SIZE IDENTIFIER
0: Apple_HFS Macintosh HD *209.6 GB disk1
Logical Volume on disk0s2
ADB5ED30-596D-4CBF-95B6-3147DF954E96
Unlocked Encrypted
diskutil cs list
MacBook-Pro:~ Ran$ diskutil cs list
CoreStorage logical volume groups (1 found)
|
+-- Logical Volume Group B8C99B8C-D7C4-4E0E-8AD3-BA68035C6584
=========================================================
Name: Macintosh HD
Status: Online
Size: 209999998976 B (210.0 GB)
Free Space: 0 B (0 B)
|
+-< Physical Volume 0D9669BA-EE47-4F1C-A256-BFD369F8694E
| ----------------------------------------------------
| Index: 0
| Disk: disk0s2
| Status: Online
| Size: 209999998976 B (210.0 GB)
|
+-> Logical Volume Family BF2FC390-7959-4AD8-A73C-6A2D1ACFD56B
Encryption Status: Unlocked
Encryption Type: AES-XTS
Conversion Status: Complete
Conversion Direction: -none-
Has Encrypted Extents: Yes
Fully Secure: Yes
Passphrase Required: Yes
|
+-> Logical Volume ADB5ED30-596D-4CBF-95B6-3147DF954E96
Disk: disk1
Status: Online
Size (Total): 209648091136 B (209.6 GB)
Conversion Progress: -none-
Revertible: Yes (unlock and decryption required)
LV Name: Macintosh HD
Volume Name: Macintosh HD
Content Hint: Apple_HFS
sudo gpt -vv -r show /dev/disk
MacBook-Pro:~ Ran$ sudo gpt -vv -r show /dev/disk0
gpt show: /dev/disk0: mediasize=251000193024; sectorsize=512; blocks=490234752
gpt show: /dev/disk0: Suspicious MBR at sector 0
gpt show: /dev/disk0: Pri GPT at sector 1
gpt show: /dev/disk0: Sec GPT at sector 490234751
start size index contents
0 1 MBR
1 1 Pri GPT header
2 32 Pri GPT table
34 6
40 409600 1 GPT part - C12A7328-F81F-11D2-BA4B-00A0C93EC93B
409640 410156248 2 GPT part - 53746F72-6167-11AA-AA11-00306543ECAC
410565888 1269536 3 GPT part - 426F6F74-0000-11AA-AA11-00306543ECAC
411835424 19807200
431642624 58591232 4 GPT part - EBD0A0A2-B9E5-4433-87C0-68B6B72699C7
490233856 863
490234719 32 Sec GPT table
490234751 1 Sec GPT header
sudo fdisk /dev/disk
MacBook-Pro:~ Ran$ sudo fdisk /dev/disk0
Disk: /dev/disk0 geometry: 30515/255/63 [490234752 sectors]
Signature: 0xAA55
Starting Ending
#: id cyl hd sec - cyl hd sec [ start - size]
1: EE 1023 254 63 - 1023 254 63 [ 1 - 409639] <Unknown ID>
2: AC 1023 254 63 - 1023 254 63 [ 409640 - 410156248] <Unknown ID>
3: AB 1023 254 63 - 1023 254 63 [ 410565888 - 1269536] Darwin Boot
*4: 07 1023 254 63 - 1023 254 63 [ 431642624 - 58591232] HPFS/QNX/AUX
sudo dd if=/dev/rdisk0 count=1 2>/dev/null | hexdump -
MacBook-Pro:~ Ran$ sudo fdisk /dev/disk0
Disk: /dev/disk0 geometry: 30515/255/63 [490234752 sectors]
Signature: 0xAA55
Starting Ending
#: id cyl hd sec - cyl hd sec [ start - size]
1: EE 1023 254 63 - 1023 254 63 [ 1 - 409639] <Unknown ID>
2: AC 1023 254 63 - 1023 254 63 [ 409640 - 410156248] <Unknown ID>
3: AB 1023 254 63 - 1023 254 63 [ 410565888 - 1269536] Darwin Boot
*4: 07 1023 254 63 - 1023 254 63 [ 431642624 - 58591232] HPFS/QNX/AUX
MacBook-Pro:~ Ran$ sudo dd if=/dev/rdisk0 count=1 2>/dev/null | hexdump -C
00000000 33 c0 8e d0 bc 00 7c 8e c0 8e d8 be 00 7c bf 00 |3.....|......|..|
00000010 06 b9 00 02 fc f3 a4 50 68 1c 06 cb fb b9 04 00 |.......Ph.......|
00000020 bd be 07 80 7e 00 00 7c 0b 0f 85 0e 01 83 c5 10 |....~..|........|
00000030 e2 f1 cd 18 88 56 00 55 c6 46 11 05 c6 46 10 00 |.....V.U.F...F..|
00000040 b4 41 bb aa 55 cd 13 5d 72 0f 81 fb 55 aa 75 09 |.A..U..]r...U.u.|
00000050 f7 c1 01 00 74 03 fe 46 10 66 60 80 7e 10 00 74 |....t..F.f`.~..t|
00000060 26 66 68 00 00 00 00 66 ff 76 08 68 00 00 68 00 |&fh....f.v.h..h.|
00000070 7c 68 01 00 68 10 00 b4 42 8a 56 00 8b f4 cd 13 ||h..h...B.V.....|
00000080 9f 83 c4 10 9e eb 14 b8 01 02 bb 00 7c 8a 56 00 |............|.V.|
00000090 8a 76 01 8a 4e 02 8a 6e 03 cd 13 66 61 73 1c fe |.v..N..n...fas..|
000000a0 4e 11 75 0c 80 7e 00 80 0f 84 8a 00 b2 80 eb 84 |N.u..~..........|
000000b0 55 32 e4 8a 56 00 cd 13 5d eb 9e 81 3e fe 7d 55 |U2..V...]...>.}U|
000000c0 aa 75 6e ff 76 00 e8 8d 00 75 17 fa b0 d1 e6 64 |.un.v....u.....d|
000000d0 e8 83 00 b0 df e6 60 e8 7c 00 b0 ff e6 64 e8 75 |......`.|....d.u|
000000e0 00 fb b8 00 bb cd 1a 66 23 c0 75 3b 66 81 fb 54 |.......f#.u;f..T|
000000f0 43 50 41 75 32 81 f9 02 01 72 2c 66 68 07 bb 00 |CPAu2....r,fh...|
00000100 00 66 68 00 02 00 00 66 68 08 00 00 00 66 53 66 |.fh....fh....fSf|
00000110 53 66 55 66 68 00 00 00 00 66 68 00 7c 00 00 66 |SfUfh....fh.|..f|
00000120 61 68 00 00 07 cd 1a 5a 32 f6 ea 00 7c 00 00 cd |ah.....Z2...|...|
00000130 18 a0 b7 07 eb 08 a0 b6 07 eb 03 a0 b5 07 32 e4 |..............2.|
00000140 05 00 07 8b f0 ac 3c 00 74 09 bb 07 00 b4 0e cd |......<.t.......|
00000150 10 eb f2 f4 eb fd 2b c9 e4 64 eb 00 24 02 e0 f8 |......+..d..$...|
00000160 24 02 c3 49 6e 76 61 6c 69 64 20 70 61 72 74 69 |$..Invalid parti|
00000170 74 69 6f 6e 20 74 61 62 6c 65 00 45 72 72 6f 72 |tion table.Error|
00000180 20 6c 6f 61 64 69 6e 67 20 6f 70 65 72 61 74 69 | loading operati|
00000190 6e 67 20 73 79 73 74 65 6d 00 4d 69 73 73 69 6e |ng system.Missin|
000001a0 67 20 6f 70 65 72 61 74 69 6e 67 20 73 79 73 74 |g operating syst|
000001b0 65 6d 00 00 00 63 7b 9a 4e 8b 2f 59 00 00 00 fe |em...c{.N./Y....|
000001c0 ff ff ee fe ff ff 01 00 00 00 27 40 06 00 00 fe |..........'@....|
000001d0 ff ff ac fe ff ff 28 40 06 00 d8 7c 72 18 00 fe |......(@...|r...|
000001e0 ff ff ab fe ff ff 00 bd 78 18 20 5f 13 00 80 fe |........x. _....|
000001f0 ff ff 07 fe ff ff 00 58 ba 19 00 08 7e 03 55 aa |.......X....~.U.|
00000200
Thanks.1. I started off with 30 gb and then added around 10 so it's probably choice number 2
2. I did that for the first one, and I got this:
When you say familiar files you mean real files on my windows partition?
3. I pressed q to go back and search the other MS data entry but it got me here:
Do I have to restart the process now? -
J2ee Can't start after JDK upgrade on system with Wily Introscope
Hello All,
For one of our portal server java patching is done from java 1.4.2.22 to java 1.4.2.25. And on this server Wily Introscope is installed.As per SAP when ever we upgrade java we need to re-create "AutoProbeConnector.jar" and update the JAVA VM parameters in configtool.
I know the procedure to re-create "AutoProbeConnector.jar" if the Introscope agent is installed manually .
Below are the steps to be followed to re-create if it is manual type.
i)Re-create the AutoProbeConnector.jar file
>wily>connector
java -jar CreateAutoProbeConnector.jar -jvm /opt/java1.4 -output
AutoProbeConnector.jar
Output file AutoProbeConnector.jar created.
ii)Setting Java vm parameters through configtool.
Xbootclasspath/p:/usr/sap/ccms/wily/connectors/AutoProbeConnector.jar:/usr/sap/ccms/wily/Agent.jar
Dcom.wily.introscope.agentProfile=/usr/sap/ccms/wily/IntroscopeAgent.profile
-Dcom.wily.introscope.agent.agentName=<AgentName>
But my systems Introscope agent is created automatically by SDM agent.if this is the case we need to re-execute the Introscope agent setup again to re-create the AutoProbeConnector.jar file.
Can you any one tell me the procedure to do this activity, if possible with steps and the paths to be followed.
Classpath parameter file which says it is installed automatically.
ID27689350.JavaParameters=-Xbootclasspath/p:/usr/sap/SMD/J98/SMDAgent/applications.config/com.sap.smd.agent.application.wily/BytecodeAgent/ISAGENT.7.2.3.0-2008-08-11/wily/connec
tors/AutoProbeConnector.jar:/usr/sap/SMD/J98/SMDAgent/applications.config/com.sap.smd.agent.application.wily/BytecodeAgent/ISAGENT.7.2.3.0-2008-08-11/wily/Agent.jar -Dcom.wily.i
ntroscope.agent.agentName=BPD_JC02_server0 -Dcom.wily.introscope.agentProfile=/usr/sap/SMD/J98/SMDAgent/applications.config/com.sap.smd.agent.application.wily/BytecodeAgent/ISAG
ENT.7.2.3.0-2008-08-11/wily/IntroscopeAgent.profile -Djava.security.policy=./java.policy -Djava.security.egd=file:/dev/urandom -Dorg.omg.CORBA.ORBClass=com.sap.engine.system.ORB
Proxy -Dorg.omg.CORBA.ORBSingletonClass=com.sap.engine.system.ORBSingletonProxy -Djavax.rmi.CORBA.PortableRemoteObjectClass=com.sap.engine.system.PortableRemoteObjectProxy -Djco
.jarm=1 -Dsun.io.useCanonCaches=false -Djava.awt.headless=true -XX:SoftRefLRUPolicyMSPerMB=1 -verbose:gc -XX:PrintGCDetails -XX:PrintGCTimeStamps -XX:+UseParNewGC -Xms2048M -X
X:NewSize=320M -XX:NewSize=320M -XX:HandlePromotionFailure -XX:PrintClassHistogram -XX:HeapDumpOnOutOfMemoryError -XX:DisableExplicitGC -XX:MaxPermSize=256M -XX:PermSize=256
M -XX:SurvivorRatio=2 -XX:TargetSurvivorRatio=90 -Drdbms.driverLocation=/oracle/BPD/920_64/jdbc/lib/classes12.jar -Dsys.global.dir=/usr/sap/BPD/SYS/global/Hello Jansi,
Thanks for the update.
I have gone through the document, and currently i require to update the Introscope Agent via SMD.
In the document it is mentioned as the navigation
Launch the Introscope Setup application: Diagnostics Setup > Managed Systems>Introscope Agent.
These are the below doubts i have.
1>How should i enter to "Launch the Introscope setup application"
2>and then followed by Diagnostics setup.
Kindly help me in detailed navigation, for example to which server i need to login(is it the Enterprise Manager server ?)
Awaiting your reply.
best Regards
Rakesh -
Problems with N76 after software upgrade of PC Sui...
I downloaded and ran the current Nokia Software Updater which has been installed on my PC and in turn installed and updated all related components.
I then followed the instructions to a tee, backed up files, via content copier, updated my N76 with the latest version of the Device software. Upon the phone restarting, all was good and the phone asked me for my country, state and date and time. When I check Device Manager it advises that I have V31.0.014 and that the Device is Updated with current date. Upon checking the Sync folder Lifeblog and PC Suite are both DEFINE and dated.
Before having had a chance to restore from my backup, I received some text messages with pics which I uploaded to my PC Lifeblog with no problems.
I then restored the backup file with great ease, so that I could have my contacts etc back on my phone.
Only problem is that it seems like not only files are restored but also any previous phone settings. I have gone through the whole process three times and each time I restore when I check the Device Manager it tells me that the phone has previous version on it and that the Device has not been updated. Also when I check the Sync folder it tells me that the PC suite (is not defined)and if I try to change any settings manually it advises that the profiles are READ ONLY.
HOW CAN I FIX THIS IT IS DRIVING ME NUTS!Hey, did you get this fixed?
-
IPod won't start after several days with charged battery
I have had this problem since I bought it a year ago. If I don't use my iPod for a few days, when I try to start it - nothing happens. When I hook it up to my computer, the Apple logo appears on the iPod screen, then everything appears normal. If I disconnect the iPod after the "initialization" period with the Apple logo, I see that the battery actually has charge, and usually plenty of it. It's as if the iPod puts itself into a sleep mode that can only be awoken by a brief power source connection. Is this common? Is there a way to avoid this period of "sleep"? Thanks.
read the following to understand the various "sleep" states:
http://docs.info.apple.com/article.html?artnum=60945
is the battery fully charging, or is it getting a partial charge?
battery information
battery questions -
Problems with rv042g after software upgrade
after software upgrade it reboot the router about every 45 sec
I've tried this tool from the Cisco website RV0xxV3_FirmwareRescueUtility_v4.0.0.7 without success, the problem is there, is a way you can get the router up and running again ?
Can i run a TFTP server and upload a new software, or i ther a FirmwareRescueUtility for rv042g ??
Mogens from DemmarkGood morning Mogens Pedersen
Thanks for using our forum
I am a Cisco network support engineer, I have a recommendation, before you upgrade any device in the future. Always keep in mind to make a backup of your data, in this way if you have to reset the device to factory settings you will not lose that information. Having said that, reset the router to the fabric configuration using the back little button, remember when you do that, you are going to loose your current configuration.
Also here I leave a link for you to download the firmware rescue utility for your router:
http://www.cisco.com/cisco/software/release.html?mdfid=282414010&release=4.0.0.7&relind=AVAILABLE&softwareid=282465800&rellifecycle=&reltype=latest
I hope you find this answer useful, if it was satisfactory for you, please mark the question as Answered
and please rate helpful posts
Greetings,
Johnnatan Rodriguez Miranda.
Cisco network support engineer -
Apps close on start with 3rd gen iPod after software upgrade
I have an iPod touch 3rd gen. Just upgraded software to 4.3.5. Now I cannot start apps on second page, first page is fine. App starts to come up, but then close immediately.
Try here:
iOS: Troubleshooting applications purchased from the App Store
Maybe you are looking for
-
No Garage Band Loops are installing
Hope you guys can help me. I have installed iLife and have been attempting to use Garageband. Certain looping elements seem to work - but the Drum, Piano, Bass and Guitar loops do not seem to install. I have done multiple reinstalls and the Loops jus
-
Ipad 3 Wifi connectivity issues on IOS8
Hi everyone, just wondering if anyone else has experienced wifi issues with ipad 3 (the retina late 2012 version). even right next to my router i keep losing connection and every time i turn on and off from sleep i need to disconnect and connect wifi
-
Export Funtionality not working in R12
HI, We have some custom forms that we have upgraded to R12. But the export funtionality is not working for these forms. When we open the form, standard funtionality like Menu> Record> Last are not working in R12. Any body can please help in this.
-
Ipv6 address setup in local zone
I'm having problems with a local zone that needs a defined IPv6 address. I've had a number of issues -- now i'm down to routing. I've set up a manual address on a physical interface, and assigned it to a zone by setting it from the global zone: ifcon
-
Downloading movies from iTunes Store in India
I am located in India. I tried to download a paid movie from the iTunes store. However, it said that this movie is not available on the Indian iTunes store, hence I cant download it. So it redirected me iTunes India. THere is no movie menu on iTunes