G4 won't boot from any Linux disc I put in it and c key no longer boots cd
I have a G4 Powermac (sawtooth, DVD drive, 512 MB RAM, 30 GB HDD) which has started refusing to boot from any Ububtu discs I have all of a sudden.
I'll be more specific. I've previously been able to boot from Ubuntu 6 cds (originals from shipit, not burnt) as well as Ubuntu 7 (burnt disc). I haven't made any changes to the system that should stop it booting from them. Currently installed on the hard disc is System 9 and Puma. It is still booting ok from my System 9, Puma, Panther and Tiger discs; but when trying to boot from my ubuntu discs (I've tried all of them to eliminate the possibility of a stuffed disc) the screen goes black for a second as if it is starting to boot, but then it kicks me to the flashing folder screen you get when it can't find a startup disc. Oddly enough the background colour of this screen isn't grey like usual. It's orange. I've never seen that before. If I leave it sitting at this screen after about 30 seconds or so it starts up from the hard disc on its own.
Another odd thing: the c key no longer forces the machine to boot from the cd when held on power up. This is extremely odd, as holding down option brings up the startup disc selector, and cmdopt+shiftdel also works. I've tried everything I can think of. Used a different keyboard, reset the NVRAM (by cmdopt+pr and my manually going into open firmware and doing a "reset-nvram" and "reset-all"). I've tried the PMU reset switch on the logic board. I've tried using different drives. In all cases it still refuses to boot from cd when holding c.
I don't think that the mac refusing to boot while holding the c key is coincidental. I believe that whatever the issue is that's causing this issue is what is also causing the mac from not booting any Ubuntu discs. It's a very strange problem and upon searching around, it seems this doesn't seem to have happened to anyone else before. Any advice will be greatly appreciated. Thanks.
Hi, yoshi -
I just have to be rush to get the cd in the drive and then to hit cmdshift+optdelete before it's too late...
You should also be able to use Startup Manager to choose the CD as the boot volume -
Article #HT1310 - Startup Manager: How to Select a Startup Volume
A feature not discussed in that article -
Once Startup Manager has loaded, if the CD is not in the drive you can press Command-. (Command-periodkey) to open the drive - this should work even if another disk is already in the drive. Insert the disk you want to use, close the tray, wait a few seconds for the disk to spin up and get recognized, then click the circular arrow icon on the left - this forces a rescan of the available drives, which should result in an icon of the new disk appearing in the array. Click it to select it and then click the straight arrow icon on the right (or press Return).
Similar Messages
-
Can no longer boot from ANY OS disc on MBP
I recently purchased a 15" 2.16ghz Core Duo Macbook Pro. It came with the original 10.4.5 discs. The previous owner installed 10.6 on it using a retail disc, then upgraded to 10.6.6. I had planned on upgrading the original hard drive. However, I cannot get the laptop to boot from the original discs or my own retail 10.6 disc. I've tried a number of different approaches (booting from an external DVD, holding down "C", holding down "option", attempting to mount in on the desktop first, etc.). Either the machine hangs or it ejects the disc (when using the internal drive). Nothing seems to work. Both the internal drive and external drive have been tested and work fine. Is it possible that when upgrading to 10.6.6 a firmware upgrade was done that won't allow the machine to boot from a disc containing an earlier version? I don't know what else could be causing the issue. The laptop has not displayed any other issues. Thanks for any suggestions or explanations.
I don't know how much help I'll be to you. Seems to have a lot of posts lately about not being able to start up from the install disks.
I assume you can still boot up from the internal drive.
When you hold the option key to start, does the screen come up with the option to choose a startup disk and is your Install Disk in when you attempt this?
While booted up normally, does the Install Disk open up with the install OSX menu? If so, does going through the install menu reboot the computer from the CD automatically?
Even if there were a firmware upgrade, seems like you would be able to use the 10.6 Install Disk to boot from. -
G4 Won't start. Won't boot from any disc (OS 9 or Linux).
I recently acquired a Power Mac G4 from my school, as they did not need it. The computer was a donation to the school, so the hard drive was removed and destroyed.
I found a hard drive for it, and hooked it in and it seems to be running fine. However no matter what I do, it will not boot from the disc drive. I have tried holding "C" while it's booting, and the screen goes white for a little while,and then it switches to the flashing Finder icon and question mark. I have also tried the Startup Manager, but it doesn't show that there are any discs whatsoever. I looked around and found that the Open Firemware may help. But I can't get into it using the CommandShift+OF command. In fact, the only time i got into it, was when I mashed a bunch of keys at once, and it came up. But that hasn't worked again.
Also (I dont know if this matters) but when I press the Power button, I don't hear that ever so wonderful, startup sound. And Ive tried to boot from the internal disc drive, and an external Sony drive.The Mirrored Drive Doors G4 models (and possibly the quicksilver 2002 models) are unable to boot OS 9 from ANY "Full Retail" CD. These Macs came out after the last versions of "Full Retail" 9.2.1 were issued, and if you bought one of these advanced G4s new, it came with a set of discs that contained a customized 9.2.1, so no new "Full Retail" OS 9 CDs were needed.
If you could post the CPU speed (check the label on the back), readers can figure out exactly which Mac you have and determine how much trouble you are in.
Can you get a Mac OS X 10.2 or 10.3 "Full Retail" CD from the school? They should have trunks full, and think of them as antiques.
Message was edited by: Grant Bennet-Alder -
My old iMac G5 won't restart no matter what I try. I get "You must restart your mac" plus grey screen. I've reset PRAM, tried safe start, tried booting from original iMac discs.. all no good. This happened when I was deleting files in preparation for trading in at Best Buy. Anybody know what's going on?
If you are really running a an "old Mac G5", then you have posted in the wrong Forum.. You have posted in the "Intel iMac Forum" by mistake.
-
MacPro won't boot from any disk but the original
We picked up a lightly used MacPro 2 x3.2G Quad Intel Xeon at work. The plan was to remove the internal drive (which is also the boot disk) and replace it with a brand new WD Caviar Black 500G drive with OS 10.5 freshly installed, and then use Migration Assistant to transfer from the old machine.
The problem is that when trying to run the OSX install disc on this new machine, it will restart, but then not boot from the install disc. Rather, the apple logo pops up, it thinks for a bit, then the grey curtain drops and i get the multi-language "you must restart your machine" message.
So, after successfully doing an install of the OS on the fresh drive using a different machine, i put it back into the new one, restarted holding OPT, and selected the fresh OS drive. I get the same multi-language message, and the machine will not boot. I've tried installing the OS on a different HD as well, to the same results.
The new machine will restart using the startup disk (internal HD) that came with it and will run Apps, etc. To confuse things further, i pulled my startup HD out of my personal tower at home (also running OS 10.5, but it's been updated to 10.5.8), stuck it in the new machine, and tried to reboot from that. This DID work (normal time startup, apps work, etc).
I thought this might be a HD problem, but now it seems like a machine problem. Maybe it doesn't like the OS install? I dunno.. Thoughts?
I just had one. I'll try to clone my HD/OS from my personal computer to the new WD 500G drive, and if that works, i'll just go from there...maybe i just had to type this out to think of something different to try, but i'll post it anyways...So you're saying essentially that this new machine, when it came out of the Apple factory, had OS 10.5.x installed on it, and because that was the original install, it won't recognize something that has OS 10.5.0, even if that install is on a fresh HD? Basically the hardware inside the tower can't/won't recognize any OS prior to the original 10.5.x factory install?
well, if that's the case, then 1)that's ridiculous of Apple to do, and 2)it makes this whole problem make more sense, and it's good future knowledge for me to have.
I cloned my personal OS (but not the users, docs, etc) and stuck that in the new tower, and it works well so far. I'm in the process of copying files to other internal drives, and i'll be using Migration Assistant to transfer users from our old system to the new one, and if all still works fine after that, i think we'll be good to go. So, based on what you've told me about the factory OS install, etc, i think we're on the right track.
Thanks very much for your input! -
Satellite A300 won't boot from any device
I've got an A300 that won't seem to boot from any device.
When I start it I see the splash screen and can enter the BIOS or Boot select.
I've tried setting boot priority to HDD & CD, and also chosen to boot from both with the Product Recovery CD in the drive.
However as soon as it gets past the splash screen I am just presented with a plain black screen.
I hear a bit of CD activity and the light flashes a couple of times but then nothing.
Normally I would expect a prompt to press a key to boot from CD.
I have tried pressing the key anyway but this just seems to result in a default beep.
Could it be the graphics card on the system board?Hi
> Could it be the graphics card on the system board?
I think this is no matter if the issue would be related to mobo or GPU in both cases the motherboard needs to be replaced. But if you area able to access the BIOS then the mobo could be ok.
But generally speaking it sounds like serious hardware problem and I think its time for an notebook technician.
Anyway, did you try to boot from different CDs? I mean Linux Live CD or Windows PartBE?
Please check this both disks can be downloaded for free -
G4 that will not boot from any disc EXCEPT the Apple Hardware Test CD
We have a DP 1ghz Quicksilver PowerMac G4 that will not boot from any disc EXCEPT the Apple Hardware Test CD that came with the machine.
We were in the process of installing 10.4 Tiger before placing it for sale.
The Mac was originally OSX Server 10.1 that we later converted to a worksation running 10.3 Panther.
It has 1 GB of memory, 80GB hardrive, 250MB Zip Drive and a Radeon 7500 video card.
Since this machine only has a CD-R drive and not a DVD-R, we installed Tiger using another Mac via Target Disk Mode. The installation process went well, but when I tried to reboot I got a Kernel Panic right after startup screen with the grey Apple logo.
On some reboots we get to the blue startup screen, others it stops at the grey Apple logo, others a black box like the a Kernel Panic - but with no text. Twice it went directly into Open Firmware.
We have done the following during our troubleshooting:
- Reseat RAM, Video Card, Hard Drive, Zip & CD-R connections
- Remove RAM 1 stick at a time and reboot
- Replace RAM with RAM from another working Quicksilver
- Replace Video Card with one from another working Quicksilver
- Zap PRAM
- Reset CUDA switch
- Unplug the MAC and remove everything (RAM, Battery, etc) for 30 minutes and try to reboot
- Tried booting from the Macintosh Server G4 Software Restore CD
- Tried booting from Mac OS X Server CD
- Tried booting from AppleCare Protection Plan CD with TechTool
- Tried booting from Diskwarrior CD
- Tried booting from an external FireWire drive with a disk image of Tiger OS Install
- Tried booting with the hard drive disconnected
The Mac WILL boot from the Apple Hardware Test CD and will pass ALL of the extended tests.Conventional wisdom says that any Mac that will not boot up from a System/Install CD OS 9 or an Install CD Mac OS X, has a Hardware problem.
The diagnostic CD is a red herring because it uses a very primitive method of reading the CD, and so does not properly represent the machines general ability to read CDs.
I would look at the CD drive cables, etc, and see if another drive gives different results.
You have not mentioned using the Startup Manager (option key at Startup) to do any checking:
HT1310- Startup Manager: How to select a startup volume -
G5 gets grey screen with logo then goes black, won't boot from any disk
Won't boot from any disk, already changed VRAM battery, no success. tried hardware disk once and ran a full scan, said error with Video, but now won't boot at all with any disk. Screen is choppy also(have pic). Thinking video graphics card? Not sure. Need help!
Hi bribiel, and a warm welcome to the forums!
It certainly sounds like the Video card from the little info we have, & that can certainly cause it to fail to bootup. -
IBook Won't Boot From ANY Optical Disk - correct forum this time sorry.
My trusty old iBook circa mid 2005 is overdue for an overhaul but refuses to boot in Target disc mode or boot from any of my install disks, 10 or 10.3 or 10.4. When I choose the disk from Startup Disk it begins to reboot until the Apple screen comes up with some pixelly artifacts onscreen and it hangs. Holding the 'C' key down does nothing. Please help I need to wipe this baby clean and start from scratch.
Hey Craig,
Here's my pics of where the GPU sits from an earlier discussion:
"This is the position of the GPU on top. That bay right below is where the hard drive goes and that's it's connector lower right:
http://s291.photobucket.com/albums/ll306/spudnuty/?action=view¤t=13312GPUt op.jpg
Here's a view with the heat sink in place and a ghost image of the GPU:
http://s291.photobucket.com/albums/ll306/spudnuty/?action=view¤t=13312iBoo kGPUheatsink.jpg
The spot where I'd recommend applying pressure from underneath:
http://s291.photobucket.com/albums/ll306/spudnuty/?action=view¤t=13312GPUu nderneath.jpg
and where that spot is on the lower shield:
http://s291.photobucket.com/albums/ll306/spudnuty/?action=view¤t=133GPUBot tomshield.jpg
So to access that you'd take the lower case off. Go to ifixit for that.
If that solves your problem or makes it better it will run like that for a while. If it gets worse you'd need to reball it. $79 plus shipping one way in the States."
Richard
Message was edited by: spudnuty -
IMac will not boot from any mode except Target Disk
I have an Early 2008 Penryn iMac 24" MB398LL/A running OS X 10.7.4 (see specs below) that will not boot from ANY mode, It also has several strange vertical bars from top to bottom on the screen. They are about 10 px wide, with some pixels empty and looks a bit like a barcode if you squint at it.
I have tried Safe Boot, Force Boot, DVD Boot, FireWire/USB Boot, and it always gets to the same point. It gets to the apple screen with the spinning gear and then after about 8 seconds it freezes. The only way it works at all is in Target Disk Mode. It pops right up on my Macbook Pro and I was able to grab all my info!
I have run Disc Utilities and Tech Tool on it many times from my MBP and it passes every test.
I reformatted the HD and installed 10.7 again, it still freezes up at the same point.
I have tried using Single User mode and every time have had to run /sbin/fsck -fy twice because it always says the disk is ok but it was modified on the first pass.
I thought maybe it had a bad video card or logic board but and I ran the Apple Hardware Test on many occasions and it always passes. Recently I was told about Loop Mode and just completed running the AHT for just over 30 hours without any errors at all.
UPDATE...
Strange Part… I tried installing Mountain Lion in Target Disk Mode and everything went smoothly. When it restarted on its own the lines on the screen were gone for the moment, but the Mac still freezes up on the spinning gear and immediately restarts on its own. I have run every thing listed above on it and still nothing. Sometimes the lines reappear then in two more starts they are gone.
I did manage to have it start one time got a copy of the the error report (its at the bottom too) The Mac ran for at least 30 minutes with no problems, then the screen went crazy a few seconds and it became unresponsive. The mouse moved but that was all it could do. Now my iMac continually restarts itself, I don't have any more ideas, HELP!
Specs...
The iMac "Core 2 Duo" 3.06 24-Inch Aluminum (Early 2008/Penryn) features a 3.06 GHz Intel "Core 2 Duo" processor (E8435), with two independent processor "cores" on a single silicon chip, a 6 MB shared level 2 cache, a 1066 MHz system bus, 2 GB of RAM (800 MHz DDR2 SDRAM, PC2-6400), a 500 GB (7200 RPM) Serial ATA hard drive, a vertically-mounted slot-loading DVD±R DL "SuperDrive", NVIDIA GeForce 8800 GS graphics acceleration with 512 MB of GDDR3 memory, a built-in iSight video camera, and built-in stereo speakers underneath the 24" glossy TFT Active Matrix LCD (1920x1200 native) display.
Error Report…
Sat Sep 1 17:13:12 2012
panic(cpu 0 caller 0xffffff801a4b7b95): Kernel trap at 0xffffff7f9bab8654, type 14=page fault, registers:
CR0: 0x000000008001003b, CR2: 0x0000000000000010, CR3: 0x0000000011803000, CR4: 0x0000000000000660
RAX: 0x0000000000000001, RBX: 0xffffff8050e00000, RCX: 0xffffff801aa8eb00, RDX: 0xffffff80602dba38
RSP: 0xffffff80602dbb60, RBP: 0xffffff80602dbb60, RSI: 0x0000000000000000, RDI: 0x0000000000000000
R8: 0x0000000000000000, R9: 0x00000000000000ff, R10: 0xffffffffffffffff, R11: 0x00000000ffffffff
R12: 0xffffff8050e00000, R13: 0x0000000000000000, R14: 0x0000000000000002, R15: 0x0000000000000000
RFL: 0x0000000000010246, RIP: 0xffffff7f9bab8654, CS: 0x0000000000000008, SS: 0x0000000000000010
Fault CR2: 0x0000000000000010, Error code: 0x0000000000000000, Fault CPU: 0x0Here is the complete error log...
Sat Sep 1 17:13:12 2012
panic(cpu 0 caller 0xffffff801a4b7b95): Kernel trap at 0xffffff7f9bab8654, type 14=page fault, registers:
CR0: 0x000000008001003b, CR2: 0x0000000000000010, CR3: 0x0000000011803000, CR4: 0x0000000000000660
RAX: 0x0000000000000001, RBX: 0xffffff8050e00000, RCX: 0xffffff801aa8eb00, RDX: 0xffffff80602dba38
RSP: 0xffffff80602dbb60, RBP: 0xffffff80602dbb60, RSI: 0x0000000000000000, RDI: 0x0000000000000000
R8: 0x0000000000000000, R9: 0x00000000000000ff, R10: 0xffffffffffffffff, R11: 0x00000000ffffffff
R12: 0xffffff8050e00000, R13: 0x0000000000000000, R14: 0x0000000000000002, R15: 0x0000000000000000
RFL: 0x0000000000010246, RIP: 0xffffff7f9bab8654, CS: 0x0000000000000008, SS: 0x0000000000000010
Fault CR2: 0x0000000000000010, Error code: 0x0000000000000000, Fault CPU: 0x0
Backtrace (CPU 0), Frame : Return Address
0xffffff80602db800 : 0xffffff801a41d5f6
0xffffff80602db870 : 0xffffff801a4b7b95
0xffffff80602dba40 : 0xffffff801a4ce4ad
0xffffff80602dba60 : 0xffffff7f9bab8654
0xffffff80602dbb60 : 0xffffff7f9baa218c
0xffffff80602dbbb0 : 0xffffff7f9baa20e2
0xffffff80602dbbd0 : 0xffffff7f9ba73554
0xffffff80602dbc00 : 0xffffff7f9aa8d470
0xffffff80602dbc40 : 0xffffff7f9aa8d3df
0xffffff80602dbc60 : 0xffffff7f9aa926ec
0xffffff80602dbcf0 : 0xffffff7f9aa8af20
0xffffff80602dbd20 : 0xffffff7f9aadacc7
0xffffff80602dbd70 : 0xffffff801a833b9b
0xffffff80602dbdc0 : 0xffffff801a862d57
0xffffff80602dbe30 : 0xffffff801a497cef
0xffffff80602dbe80 : 0xffffff801a420abd
0xffffff80602dbeb0 : 0xffffff801a410448
0xffffff80602dbf00 : 0xffffff801a4195fb
0xffffff80602dbf70 : 0xffffff801a4a5ad6
0xffffff80602dbfb0 : 0xffffff801a4ced13
Kernel Extensions in backtrace:
com.apple.iokit.IOGraphicsFamily(2.3.4)[2600903C-EEDE-321B-A023-169DC9B26EA6]@0 xffffff7f9aa81000->0xffffff7f9aab8fff
dependency: com.apple.iokit.IOPCIFamily(2.7)[8C9E06A4-13D0-33F5-A377-9E36F0ECC229]@0xffffff 7f9aa4d000
com.apple.NVDAResman(8.0)[6A699209-FB98-316B-A3C0-DCA82AA8C86B]@0xffffff7f9aad8 000->0xffffff7f9addafff
dependency: com.apple.iokit.IOPCIFamily(2.7)[8C9E06A4-13D0-33F5-A377-9E36F0ECC229]@0xffffff 7f9aa4d000
dependency: com.apple.iokit.IONDRVSupport(2.3.4)[99CA4184-8D92-31B2-8726-46139E8E3DFF]@0xff ffff7f9aac4000
dependency: com.apple.iokit.IOGraphicsFamily(2.3.4)[2600903C-EEDE-321B-A023-169DC9B26EA6]@0 xffffff7f9aa81000
com.apple.GeForce(8.0)[4B9BE287-5251-398E-96B0-BB16C9BFB2D9]@0xffffff7f9ba72000 ->0xffffff7f9bb34fff
dependency: com.apple.NVDAResman(8.0.0)[6A699209-FB98-316B-A3C0-DCA82AA8C86B]@0xffffff7f9aa d8000
dependency: com.apple.iokit.IONDRVSupport(2.3.4)[99CA4184-8D92-31B2-8726-46139E8E3DFF]@0xff ffff7f9aac4000
dependency: com.apple.iokit.IOPCIFamily(2.7)[8C9E06A4-13D0-33F5-A377-9E36F0ECC229]@0xffffff 7f9aa4d000
dependency: com.apple.iokit.IOGraphicsFamily(2.3.4)[2600903C-EEDE-321B-A023-169DC9B26EA6]@0 xffffff7f9aa81000
BSD process name corresponding to current thread: WindowServer
Mac OS version:
12B19
Kernel version:
Darwin Kernel Version 12.1.0: Tue Aug 14 13:29:55 PDT 2012; root:xnu-2050.9.2~1/RELEASE_X86_64
Kernel UUID: 3005059E-270B-3B9F-940D-7A66C05DDC9D
Kernel slide: 0x000000001a200000
Kernel text base: 0xffffff801a400000
System model name: iMac8,1 (Mac-F227BEC8)
System uptime in nanoseconds: 26349024446
last loaded kext at 22534854703: com.apple.driver.AppleHDAHardwareConfigDriver 2.3.0f2 (addr 0xffffff7f9c489000, size 12288)
loaded kexts:
com.apple.driver.AppleHDAHardwareConfigDriver 2.3.0f2
com.apple.driver.AppleHDA 2.3.0f2
com.apple.driver.AppleTyMCEDriver 1.0.2d2
com.apple.filesystems.autofs 3.0
com.apple.iokit.IOBluetoothSerialManager 4.0.9f8
com.apple.iokit.IOBluetoothUSBDFU 4.0.9f8
com.apple.driver.AppleLPC 1.6.0
com.apple.driver.AppleMuxControl 3.2.6
com.apple.driver.AppleBacklight 170.2.3
com.apple.driver.AppleUpstreamUserClient 3.5.10
com.apple.driver.AppleMCCSControl 1.0.33
com.apple.GeForce 8.0.0
com.apple.driver.AppleSMCPDRC 1.0.0
com.apple.iokit.IOUserEthernet 1.0.0d1
com.apple.Dont_Steal_Mac_OS_X 7.0.0
com.apple.driver.ApplePolicyControl 3.2.6
com.apple.driver.ACPI_SMC_PlatformPlugin 1.0.0
com.apple.driver.AppleIRController 320.15
com.apple.iokit.SCSITaskUserClient 3.5.1
com.apple.driver.AppleFileSystemDriver 3.0.1
com.apple.AppleFSCompression.AppleFSCompressionTypeDataless 1.0.0d1
com.apple.AppleFSCompression.AppleFSCompressionTypeZlib 1.0.0d1
com.apple.BootCache 34
com.apple.driver.XsanFilter 404
com.apple.iokit.IOAHCIBlockStorage 2.2.1
com.apple.driver.AppleFWOHCI 4.9.5
com.apple.driver.AppleUSBHub 5.1.6
com.apple.driver.AirPortBrcm43224 600.36.17
com.apple.iokit.AppleYukon2 3.2.3b1
com.apple.driver.AppleAHCIPort 2.4.0
com.apple.driver.AppleIntelPIIXATA 2.5.1
com.apple.driver.AppleUSBEHCI 5.1.5
com.apple.driver.AppleUSBUHCI 5.1.5
com.apple.driver.AppleEFINVRAM 1.6.1
com.apple.driver.AppleRTC 1.5
com.apple.driver.AppleHPET 1.7
com.apple.driver.AppleACPIButtons 1.6
com.apple.driver.AppleSMBIOS 1.9
com.apple.driver.AppleACPIEC 1.6
com.apple.driver.AppleAPIC 1.6
com.apple.driver.AppleIntelCPUPowerManagementClient 196.0.0
com.apple.nke.applicationfirewall 4.0.39
com.apple.security.quarantine 2
com.apple.driver.AppleIntelCPUPowerManagement 196.0.0
com.apple.driver.DspFuncLib 2.3.0f2
com.apple.iokit.IOAudioFamily 1.8.9fc9
com.apple.kext.OSvKernDSPLib 1.6
com.apple.kext.triggers 1.0
com.apple.iokit.IOSerialFamily 10.0.6
com.apple.driver.AppleSMBusPCI 1.0.10d0
com.apple.driver.AppleBacklightExpert 1.0.4
com.apple.driver.AppleSMBusController 1.0.10d0
com.apple.nvidia.nv50hal 8.0.0
com.apple.NVDAResman 8.0.0
com.apple.iokit.IOFireWireIP 2.2.5
com.apple.driver.AppleHDAController 2.3.0f2
com.apple.iokit.IOHDAFamily 2.3.0f2
com.apple.iokit.IOSurface 86.0.2
com.apple.iokit.IOBluetoothFamily 4.0.9f8
com.apple.driver.AppleGraphicsControl 3.2.6
com.apple.iokit.IONDRVSupport 2.3.4
com.apple.iokit.IOGraphicsFamily 2.3.4
com.apple.driver.AppleSMC 3.1.3d11
com.apple.driver.IOPlatformPluginLegacy 1.0.0
com.apple.driver.IOPlatformPluginFamily 5.2.0d16
com.apple.iokit.IOUSBHIDDriver 5.0.0
com.apple.driver.AppleUSBMergeNub 5.1.5
com.apple.driver.AppleUSBComposite 5.0.0
com.apple.iokit.IOSCSIMultimediaCommandsDevice 3.5.1
com.apple.iokit.IOBDStorageFamily 1.7
com.apple.iokit.IODVDStorageFamily 1.7.1
com.apple.iokit.IOCDStorageFamily 1.7.1
com.apple.iokit.IOATAPIProtocolTransport 3.5.0
com.apple.iokit.IOSCSIArchitectureModelFamily 3.5.1
com.apple.iokit.IOFireWireFamily 4.5.5
com.apple.iokit.IOUSBUserClient 5.0.0
com.apple.iokit.IO80211Family 500.15
com.apple.iokit.IONetworkingFamily 3.0
com.apple.iokit.IOAHCIFamily 2.2.0
com.apple.iokit.IOATAFamily 2.5.1
com.apple.iokit.IOUSBFamily 5.1.6
com.apple.driver.AppleEFIRuntime 1.6.1
com.apple.iokit.IOHIDFamily 1.8.0
com.apple.iokit.IOSMBusFamily 1.1
com.apple.security.sandbox 220
com.apple.kext.AppleMatch 1.0.0d1
com.apple.security.TMSafetyNet 7
com.apple.driver.DiskImages 344
com.apple.iokit.IOStorageFamily 1.8
com.apple.driver.AppleKeyStore 28.18
com.apple.driver.AppleACPIPlatform 1.6
com.apple.iokit.IOPCIFamily 2.7
com.apple.iokit.IOACPIFamily 1.4
com.apple.kec.corecrypto 1.0
Model: iMac8,1, BootROM IM81.00C1.B00, 2 processors, Intel Core 2 Duo, 3.06 GHz, 2 GB, SMC 1.30f1
Graphics: NVIDIA GeForce 8800 GS, NVIDIA GeForce 8800 GS, PCIe, 512 MB
Memory Module: BANK 0/DIMM0, 1 GB, DDR2 SDRAM, 800 MHz, 0x2C00000000000000, 0x38485446313238363448445A2D3830304531
Memory Module: BANK 1/DIMM1, 1 GB, DDR2 SDRAM, 800 MHz, 0x2C00000000000000, 0x38485446313238363448445A2D3830304531
AirPort: spairport_wireless_card_type_airport_extreme (0x14E4, 0x8C), Broadcom BCM43xx 1.0 (5.10.131.36.16)
Bluetooth: Version 4.0.9f8 10405, 2 service, 18 devices, 1 incoming serial ports
Serial ATA Device: WDC WD5000AAKS-40YGA1, 500.11 GB
Parallel ATA Device: MATSHITADVD-R UJ-875
USB Device: Built-in iSight, apple_vendor_id, 0x8502, 0xfd400000 / 2
USB Device: BRCM2046 Hub, 0x0a5c (Broadcom Corp.), 0x4500, 0x1a100000 / 2
USB Device: Bluetooth USB Host Controller, apple_vendor_id, 0x820f, 0x1a110000 / 5
USB Device: IR Receiver, apple_vendor_id, 0x8242, 0x5d100000 / 2
USB Device: Hub in Apple Extended USB Keyboard, apple_vendor_id, 0x1002, 0x1d100000 / 2
USB Device: Trackball, 0x046d (Logitech Inc.), 0xc404, 0x1d120000 / 4
USB Device: Apple Extended USB Keyboard, apple_vendor_id, 0x0204, 0x1d110000 / 3 -
Satellite NB10t-A-101 refuses to boot from any external medium
I have just purchased an NB10t in the UK, and am trying to boot to a bootable USB
I have noticed the BIOS on this particular model is UEFI mode only, That in itself is not an issue as users can sign their own OS's with a CA and use them, however this laptop refuses to boot from any external medium...or even provide an error message.
I have changed the boot priorities in the BIOS and moved the USB to the top
I have disabled Secure Boot option in the BIOS
I have tried all 3 USB ports as well as 3 different drives (NOTE: THESE WORK FINE ON 3 OTHER SYSTEMS a dell laptop/desktop and an acer laptop)
I have also tried various distributions (Debian & Arch)
I have used multiple installation methods (Unetbootin/Full hard install/Rufus etc..)
I have tried all versions of your currently released BIOSs (Shipping with V1.0, Jan-V1.1 Feb-V1.2)
After trying all of these when pressing F12 at boot, the boot menu shows up but upon selecting a device the system continues to boot into the HDD (Win8)
After googling around I noticed you have released 2 BIOS updates I have tried all versions of these and still the system refuses to boot into my selected device
Can we expect any more firmware updates in the near future? Is there a way to workaround this issue to boot my chosen OS? Is there a CSM option?
Edit: Punctuation
nullHi sorry about the multiple threads guys, the forums have been behaving a bit buggy over the past few days (anyone seen all the duplicates in the main satellite section?)
Onto my problem,
Just to make it clear to joselu90 I'm not trying to install or "reinstall" windows 8 or anything, I would like to install a Linux distro if possible
I have been doing as much reading as possible about the bay-trail architecture etc
In response to Tonny
+"This new Intel Bay Trail technology support only the UEFI capable devices and systems (Win 8, Win 8.1)"+
There are many Linux distro's capable of UEFI booting but some guidance on navigating toshiba's system would be very helpful
All I'm left with is this question that, "it should be possible to put another OS on this laptop" Or have Microsoft and Intel truly "jumped into bed with each other", so-to-speak and made it impossible to use any other software than their own? (I can't believe that to be the case) and we know for a fact that many Linux distributions support UEFI
Thanks for your time,
P.S I have not marked this question as answered yet.. -
HP Pavilion 500-210 QE Can't boot from any hard drive.
Good Evening. As you can see from the subject, my computer just can't boot from any hard drive that I put on it. I tried swapping the power supply, the SATA cable, resetting the BIOS, enabling legacy boot, changing from AHCI to IDE and RAID...
When I get to the BIOS setup, I can see the hard drive and its specifications, but it just won't boot or show up when I'm trying to install a new OS. I'm not an expert, but I think the problem might be in the motherboard SATA ports, but I'm not sure. Just to make sure, I did try another hard drive and it didn't work aswell.
I was also thinking about buying an external hard drive and instaling my OS on that, but I don't even know if that's possible and I would really like to have my computer working again.
Thank you for your attention!
This question was solved.
View Solution.What is the installed operating system?
Did you make a recovery disk set?
Did you happen to make a Windows 8.1 startup disk or USB recovery thumbdrive?
Have you tested the hard disk?
Press the power button and then immediately tap the Esc key. In the Startup menu, choose F2 for Diagnostics. In the HP Basic System Diagnostics menu choose hard disk. Run the test and post the results here.
The issue you are facing has nothing to do with the SATA ports. It is a configuration issue. Your PC is a modern one and its BIOS (UEFI) is far more advanced than what you may have seen before.
If you want to install a different operating system then you will have to make a few changes in the BIOS configuration. Secure Boot is turned on by default for Windows 8 and Windows 8.1. If you try installing a different OS without turning this off then your system won't boot up. You may be running into this if you are trying to install another operating system.
The image below is what will be seen in the BIOS of your PC in the security tab --> . In the secure boot configuration options do not clear the secure boot keys! Those keys are your operating system license activation keys.
****Please click on Accept As Solution if a suggestion solves your problem. It helps others facing the same problem to find a solution easily****
2015 Microsoft MVP - Windows Experience Consumer -
I was able to boot from the diskwarrior disc on my 2008 Macpro.
I can not on my new 2010 Macpro. All I get is the white apple screen.
why not?
The system drive graph is a mess and I need to rebuild it- suggestions?I didn't think anyone used the CD.
Install OS X to a small 30GB volume. Use that and keep it only for maintenance and repairs. Running OS X in any fashion is better and easier to rebuild the directory - OS X does not like total lack of a VM. Plus you can run multiple programs, boot faster, and you are using the latest OS X and Disk Utility and not locked into a fixed version. Same holds true for using Disk Utility, only use the DVD when there is no other means.
And with small affordable drives, or even SDHC Flash Memory card you can boot and run OS X off small 8GB (some have trimmed it to fit on 4GB but have to do that first on a hard drive).
I would clone the system (SD or CCC) and run DW against the (updated) backup image regularly. Then switch over and boot from clone (insure it works) and then repair the main system (and other drives).
With 4-5 internal drives, Firewire, and USB, lots of options for alternate boot volumes, and you can take a 1 or 2TB drive and just shrink and create a small volume on the end for such purposes.
So no need to rely on booting from CD or DVD, ever. -
Cannot boot from any bootable CDs.
I have a flat panel Imac g4 and have already reset pram/nvram. This mac won't boot from any cd's. I hear no spinning of the drive either. The screen just comes up gray and I get the folder showing a question mark alternating with the system face on the folder. I really just want to be able to boot from but the cd to try to format the drive but the cd doesn't seem to be working either. Any suggestions would be great.
Thanks
imac g3 os 9.2, Mac OS X (10.4.6)Hi Mazz
I have an old G4 iMac as well as my Macbook and I have just had this very thing happen to my iMac. I was told it was the hard drive that has died on me. I'm waiting for my new hard drive to turn up to fit it but I feel I have lost ALL the data on the old drive. I'm lucky I have all the very important files on my Macbook.
I hope this helps you out. -
Cannot Boot From ANY Optical Install Disk
My trusty old iBook circa mid 2005 is overdue for an overhaul but refuses to boot in Target disc mode or boot from any of my install disks, 10 or 10.3 or 10.4. When I choose the disk from Startup Disk it begins to reboot until the Apple screen comes up with some pixelly artifacts onscreen and it hangs. Holding the 'C' key down does nothing. Please help I need to wipe this baby clean and start from scratch.
Message was edited by: Craig HarvieuxIf you are interested in the resolution to this question go to the thread in 'Using Your iBook'
Maybe you are looking for
-
I registered a digital copy of a movie on disneymoviesanywhere. I connected the account to my itunes account but I can't find the movie on my itunes account. I'm just trying to download the movie onto my ipod touch.
-
How do I get a totally white background in a jewelry photo?
I need step-by-step instructions to get a 'professional' white background on a jewelry photo, as I've read guides, forums, all about Adjustment Layers, and I still am not achieving white. Thanks!
-
SQL function for adding street, city and postal code.
I would like to know how to add to my code to display the addresses. Any ideas? SELECT departments.department_name "Department Name", locations.state_province "Mailing Address" FROM departments, locations WHERE departments.location_id=locations.locat
-
FLV Players with multiple playlists.
Both the LA Times http://www.latimes.com and the Chicago Tribune http://www.chicagotribune.com as well as other newspapers have a nifty multi-playlist FLV player on their front page. The Player comes with a playlist that shows thumbnails for a list o
-
How to create 2 checkboxs in 2 different JTable cells within 1 buttonGroup?
Hi, I have a JTable with dynamic number of rows and 5 columns. What I mean by dynamic is that new rows can be added and existing rows can be deleted so the number of rows may change. As I said before there are 5 columns. The first 3 columns will alwa