G4 Won't Boot Up and Shows The Flashing Question Mark Folder Thing

Ok so I bought a Quicksilver G4 from this guy and he said that he took is info off it and now it won't boot up. So I have a Tiger Disk and I tried the to boot from the disk by pushing C down while it was booting and it still goes to that Flashing Question Mark and Folder thing. What should I do? Should I take it in or is there something I can do without taking it in?

Hi! It should boot from the install disc by holding down the "c" key at startup with the disc already inserted as long as it's a retail disc and not one for another model of computer. If it won't boot from a retail install disc then you have hardware problems. Tom

Similar Messages

  • HT1310 I have a macbook pro about 4 years old.  I can't get it to open past the flashing question mark folder.  However, I just tried to hold down the option key and the question mark disappeared.  Still, nothing...the light is on the screen but nothing e

    I have a 4 year old macbook pro and when I turn it on, the screen and fan come on but there is a flashing question mark folder that appears.  Nothing beyond that point....help?

    There is no installed OS or you have a dead hard drive. Start by booting from the original installer disc that came with the computer or an installer disc that has a later version than the original such as a Snow Leopard DVD. Then you can do this:
    Reinstall OS X without erasing the drive
    1. Repair the Hard Drive and Permissions
    Boot from your Snow Leopard Installer disc. After the installer loads select your language and click on the Continue button. When the menu bar appears select Disk Utility from the Utilities menu. After DU loads select your hard drive entry (mfgr.'s ID and drive size) from the the left side list.  In the DU status area you will see an entry for the S.M.A.R.T. status of the hard drive.  If it does not say "Verified" then the hard drive is failing or failed. (SMART status is not reported on external Firewire or USB drives.) If the drive is "Verified" then select your OS X volume from the list on the left (sub-entry below the drive entry,) click on the First Aid tab, then click on the Repair Disk button. If DU reports any errors that have been fixed, then re-run Repair Disk until no errors are reported. If no errors are reported click on the Repair Permissions button. Wait until the operation completes, then quit DU and return to the installer.
    If DU reports errors it cannot fix, then you will need Disk Warrior and/or Tech Tool Pro to repair the drive. If you don't have either of them or if neither of them can fix the drive, then you will need to reformat the drive and reinstall OS X.
    2. Reinstall Snow Leopard
    If the drive is OK then quit DU and return to the installer.  Proceed with reinstalling OS X.  Note that the Snow Leopard installer will not erase your drive or disturb your files.  After installing a fresh copy of OS X the installer will move your Home folder, third-party applications, support items, and network preferences into the newly installed system.
    Download and install Mac OS X 10.6.8 Update Combo v1.1.

  • TS2570 i have an intel imac and im getting a grey sceen. I get the flashing question mark folder. iv changed the H.D 2x and tired to install a new os into it but no luck. The mac isnt going into safe mode or anything. help?

    Intel imac 2009. Grey screen with question mark folder. Changed harddrives 3 times now. Tired 5 keyboards on all Usb ports and a hub and keyboard wont boot to startup or safemode of anything but hub gets power. disc drive wont eject or accept a disc cuz keyboard commands not being sent to computer. Help?

    Keyboards must be connected directly to the USB port, not through a hub.
    Reinstall OS X without erasing the drive
    Do the following:
    1. Repair the Hard Drive and Permissions
    Boot from your Snow Leopard Installer disc. After the installer loads select your language and click on the Continue button. When the menu bar appears select Disk Utility from the Utilities menu. After DU loads select your hard drive entry (mfgr.'s ID and drive size) from the the left side list.  In the DU status area you will see an entry for the S.M.A.R.T. status of the hard drive.  If it does not say "Verified" then the hard drive is failing or failed. (SMART status is not reported on external Firewire or USB drives.) If the drive is "Verified" then select your OS X volume from the list on the left (sub-entry below the drive entry,) click on the First Aid tab, then click on the Repair Disk button. If DU reports any errors that have been fixed, then re-run Repair Disk until no errors are reported. If no errors are reported click on the Repair Permissions button. Wait until the operation completes, then quit DU and return to the installer.
    If DU reports errors it cannot fix, then you will need Disk Warrior and/or Tech Tool Pro to repair the drive. If you don't have either of them or if neither of them can fix the drive, then you will need to reformat the drive and reinstall OS X.
    2. Reinstall Snow Leopard
    If the drive is OK then quit DU and return to the installer.  Proceed with reinstalling OS X.  Note that the Snow Leopard installer will not erase your drive or disturb your files.  After installing a fresh copy of OS X the installer will move your Home folder, third-party applications, support items, and network preferences into the newly installed system.
    Download and install the Combo Updater for the version you prefer from support.apple.com/downloads/.

  • G4 17' won't boot, flashing question mark folder with complications

    I'm editing a final cut pro project, due to air on friday at noon and during conversion in compressor to dvd format, final cut quits then the computer freezes up. On a hard restart I get the flashing question mark folder.... i know what that means
    I was able to boot up after a couple of tries from the os 10.4 (tiger) cd and the hard drive shows up but disk utility can't make the repair. This is the error i get:
    booted with the tiger os cd and got to the disk utility. the hard drive does show up with some generic-y looking name. I try to repair the disk and get this error (in red):
    Invalid node structure
    Volume check failed.
    Error: The underlying task reported failure on exit
    then it says:
    1 volume could not be repaired because of an error
    g4 powerbook 17" Mac OS X (10.4.9)
    so then i get the bright idea that i will change the startup disk to network drive and try to start from another drive on the network. it tries to find it then goes back to the flashing question mark. I've restarted holding the c key down with the tiger cd back in there and it is spinning but it never reads it.
    any ideas? I REALLY need to salvage this film if possible.
    thanks!!!!!
    donna
    Has anyone seen this before? What is my next step--short of erasing the drive. i really need to get this project off.
    thanks in advance for any and all help!!!!!
    g4 powerbook 17"   Mac OS X (10.4.9)  

    i'd try disk warrior except that i cant get it to boot from ANY cd right now EXCEPT apple hardware test. and i have NO idea what to do with that.
    I've tried booting in option mode and all i get is the little restart button and the forward arrow button but NO drive options
    it won't pick up my other laptop in target mode
    i've even put in Norton Utilites 8.x and it won't boot up from that either.
    i've zapped the pram--nothing
    know of any other boot tricks or shortcuts?
    donna

  • How do I fix the GRAY boot-up screen with FLASHING QUESTION-mark FOLDER?

    When I turn on the MacBook Pro laptop, I opened up the Safari Browser and its when the problem started. It was stuck on an loading infinite loop. I decided to force quit the application and/or turn off the mac by the Menu options, It did not work. So I did a "Hard" Shut-down and restarted the Mac, the Boot up screen stood gray for like a minute until the Flashing ? Folder icon showed up!.
    My sister's laptop's warranty is expired so I wonder how can I fix it without having to spend too much money on a simple troubleshooting tip.
    How can I download/create a boot-up Disk/Flash Drive so I can reset it to factory settings?
    I cannot access the laptop because It's kind-of software bricked if you ask me. Also, I do not know how to check the Mac OS version outside of the "About Mac" menu. I do have another Mac which is a desktop computer with a CD drive.
    I would appreciate some expertise on this issue a.s.a.p. Thank you!

    Ok, now I am stuck:
    Why does my Mac boot its OS from the Flash Drive instead of the INTERNAL HARD DRIVE???a
       If I start up my MacBook Pro, It will have the flashing question mark folder UNLESS i plug in the OS-Boot flash drive. When I at the desktop screen and work on a program, When I unplug the Flash drive, THE OS WILL CRASH AS IF I TOOK it's soul (OS x Lion) out of the body (MacBook Pro Laptop)
    this is frustrating because when I did the INTERNET RECOVERY, When I install OS x Lion, the Flash Drive only show up as an option as opposed to the HDD.
    I cannot format the hard-drive in DISK UTILITY because it's grayed out. This is just frustating. I never had problems with PC Windows OS recovery but this (Mac OS).

  • Boots to flashing question mark folder and disc utility cannot locate internal hard drive

    Bottling my MacBook Pro I end up with a flashing question mark folder. I reboot holding the option key to select discs and there were no options at all. I plug in an Ethernet cable and it shows a internet recovery option. I click and it downloaded a temporary recovery mode. From there I open disc utility but it doesn't find any internal hard drives. I reset the pram and I still get the flashing question mark folder. Thinking it was my internal hard drive that failed I bought and replaced the internal hd with a new one and repeated all the processes and still no internal hard drive was found. I'm stuck with the flashing question mark folder. Therefore I've concluded that it was my MacBook pros internal hard drive CABLE that had failed. Does anyone know of any other possible problems that is causing this for my MacBook Pro or know of any solutions? Or is replacing my internal hd cable the only solution? Please help!

    It was the internal HD cable. I replaced it and now my MacBook Pro works

  • Ugh, the flashing question mark...

    Earlier tonight my three year old nephew got hold of my laptop and his little magic fingers did something to cause the screen to go blank and then, the flashing question mark showed up. So, I reinstalled the OS X dvd, when it asked do I want to keep the previous system in a folder, I clicked yes.
    My question is: should I erase the folder with the previous system? If the answer is yes, where do I find it?
    Thank you in advance for your help and Happy Holidays!

    Yes, you can erase it.   It's at the top level of your internal HD.  Just open the HD via the Finder and it should appear.
    (It won't show up via Spotlight or a Finder search).
    Note that it will take quite a while to empty the trash.

  • Flashing Question mark Folder and clicking - no start up.

    Dear Mac Users,
    I've already got some info on the above, but my 3.5year old G5 iMac wont get past the flashing question mark folder icon. It can't find the start-up drive. The think the hard drive is dead - if I start up from external HD it's OK and/or Tiger CD - but the mac's HD is nowhere to be seen on any disk utility.
    Just bought Disk Warrior - that wont see the iMac HDrive either - so unless anyone has got a fix, it looks like the thing will be dumped or I get a new HD. Are these easy to buy and fit? It's a Rev A model, (the buzzy first edition). I haven't got all my files backed up, just the key ones, which are now on a new alum iMac. Or I could run it off an external drive (noisy, though).
    I had been moving the G5 around a lot (switched off) before it went belly up - could this be a cause?
    Maybe it'd been feeling left out, with the new 24in installed.
    Hope someone can shed further light.
    Rob
    (PS - anyone want buy my Disk Warrior?)

    Your drive is dead, you can look in [macsales.com] or [smalldog.com] for a new new one. The drive isn't too difficult to replace, you can do it yourself, and do get the largest one you can afford, just make sure it's a 3.5" SATA.
    Keep your DiskWarrior, you never know when it'll come in handy.

  • Hello, I'm pretty sure my fan on my 2009 mac book pro has stopped running. Would this cause the computer to slow down and take for ever to boot up and show the color wheel every time I select an application ?

    Hello, I'm pretty sure my fan on my 2009 mac book pro has stopped running. Would this cause the computer to slow down and take for ever to boot up and show the color wheel every time I select an application ? how involved to replace fan ? cost ?
    thanks

    Not directly, but if the CPU overheats because of incompatible software, that would cause slowdowns. Do not allow the computer to run if the fan is not working unless you wish to fry your motherboard. Please make a Genius Appointment and take it in for service.

  • Mac mini (late 2012) when booting shows flashing question mark folder

    Hello, so after installing software update to my mac mini *late 2012* it froze for few mins so then I rebooted it and now it wont boot it shows flashing question mark folder, I can't use the boot buttons because it asks me for a frimware password and I dont remember setting one up so how can I fix it .

    If you need to reset the firmware PW see:
    http://reviews.cnet.com/8301-13727_7-57542601-263/efi-firmware-protection-locks- down-newer-macs/

  • IMac won't boot - flashing question mark folder

    Hi, I was having performance issues with my iMac, so after searching for a resolution, I followed some suggestions to reset the PRAM and SMC....after resetting the PRAM it will not boot up at all! The startup sound chimes, then a blank grey screen briefly before a flashing question mark folder appears. Nothing happens..... I have the install cd, but there is a CD in the drive and I can't get it out. Help!!
    Thanks in advance....
    Andrea

    HI Andrea,
    To get the disk to eject, start the iMac while holding down the mouse button.
    A flashing question mark appears when you start your Mac
    Try booting while holding down the Option key.
    Carolyn

  • Hard disk in mums macbook failed, bought a new one, formatted it first. Have tried starting it with every possible key and I either get flashing question mark folder or a cursor.

    Hard disk in mums macbook failed, bought a new one, used sata adapter cable to format it for mac first. Connected it and have tried starting it with every possible key combination and I either get flashing question mark folder or a cursor. A disk is stuck in it so I can't boot from OSX, and yes I have tried every option of starting to try and eject disk but none work. HELP ME!

    Five ways to eject a stuck CD or DVD from the optical drive
    Ejecting the stuck disc can usually be done in one of the following ways:
      1. Restart the computer and after the chime press and hold down the
          left mouse button until the disc ejects.
      2. Press the Eject button on your keyboard.
      3. Click on the Eject button in the menubar.
      4. Press COMMAND-E.
      5. If none of the above work try this: Open the Terminal application in
          your Utilities folder. At the prompt enter or paste the following:
            /usr/bin/drutil eject
    If this fails then try this:
    Boot the computer into Single-user Mode. At the prompt enter the same command as used above. To restart the computer enter "reboot" at the prompt without quotes.
    If you have a 2010 MBP or later, then you can use Internet Recovery. Start by rebooting the computer. At the chime press and hold down the COMMAND-OPTION-R keys until a Globe appears in the upper part of the screen. This process can take upwards of 15 minutes to get connected to the Apple network servers. You should eventually see the utility screen of the Recovery HD. You may now go about the process to install Mountain Lion:
    Install Lion/Mountain Lion on a New HDD/SDD
    Be sure you backup your files to an external drive or second internal drive because the following procedure will remove everything from the hard drive.
    Boot to the Internet Recovery HD:
    Restart the computer and after the chime press and hold down the COMMAND-OPTION- R keys until a globe appears on the screen. Wait patiently - 15-20 minutes - until the Recovery main menu appears.
    Partition and Format the hard drive:
    1. Select Disk Utility from the main menu and click on the Continue button.
    2. After DU loads select your external hard drive (this is the entry with the mfgr.'s ID and size) from the left side list. Click on the Partition tab in the DU main window.
    3. Under the Volume Scheme heading set the number of partitions from the drop down menu to one. Click on the Options button, set the partition scheme to GUID then click on the OK button. Set the format type to Mac OS Extended (Journaled.) Click on the Partition button and wait until the process has completed. Quit DU and return to the main menu.
    Reinstall Lion/Mountain Lion: Select Reinstall Lion/Mountain Lion and click on the Install button. Be sure to select the correct drive to use if you have more than one.
    Note: You will need an active Internet connection. I suggest using Ethernet if possible because it is three times faster than wireless.

  • I see that i have a problem after installing my new hard drive on my macbook pro mid 2009 version. I put a new hard drive, with all of my information from my old drive installed on it, into the computer. but now have the blinking question mark folder

    i see that i have a problem after installing my new hard drive on my macbook pro mid 2009 version. I put a new hard drive, with all of my information from my old drive installed on it, into the computer. but now have the blinking question mark folder. I see that it means that it isn't reading the new hard drive.
    did i miss a step between transferring all of my information from my old hard drive to the new hard drive and installing the new hard drive into the computer. I believe that i installed properly. it was quite easy.
    thanks for your help

    It means there is no bootable system on the drive. If you still have access to the old drive, then I suggest you boot from it then clone it to the new internal drive. Use OPTION boot to boot from the Recovery HD on the old drive:
    Boot to the Recovery HD:
    Restart the computer and after the chime press and hold down the OPTION key until the boot manager screen appears. Select the Recovery HD and click on the downward pointing arrow button.
         1. Select Disk Utility from the main menu then press the Continue
             button.
         2. Select the destination volume from the left side list.
         3. Click on the Restore tab in the DU main window.
         4. Select the destination volume from the left side list and drag it
             to the Destination entry field.
         5. Select the source volume from the left side list and drag it to
             the Source entry field.
         6. Double-check you got it right, then click on the Restore button.
    Source means the external old drive. Destination means the new internal drive.

  • How to fix the " flashing question mark after the finder icon when starting up" withou an apple keyboard?

    Hi
    I am wondering How to fix the " flashing question mark after the finder icon when starting up" without an apple keyboard. I have 2 of those .7Ghz emacs so just wanna fix them
    Thx

    Hi,
    >I am using a wireless standard keyboard so maybe the emac doesn't regognise it
    Installation of driver software may be required. Do not expect any wireless device to automatically work with a Mac unless guaranteed to do so. In a case like this, use a wired USB keyboard (a PC keyboard should be OK) and a wired mouse to begin with.
    >I have installed Ubuntu 13.00 on the HDD from another computer.
    Is it a version for PowerPC?
    https://wiki.ubuntu.com/PowerPCFAQ
    https://wiki.ubuntu.com/PowerPCDownloads
    >a list of eMac hotkey's that can be used before OS boot from a standard Windows keyboard?
    Could the following article be of interest?
    http://support.microsoft.com/kb/970299
    If/when starting from a bootable CD, press and hold the C key.
    Jan

  • Flashing question mark folder OS X 10.6.8.  Issue is not the drive itself.

    Received flashing question mark folder on a MBP5,5 running 10.6.8.  Removed the drive and was able to boot on same machine with the drive plugged in as external USB.  Any idea as to what the issue may be?  It's not the drive itself.  Bad connector?  Going to update the drive to mountain lion this weekend to see if that resolves anything.

    Actually, it is the drive in some way.
    Question (?) Mark, Blinking Folder, or Gray Screen at Startup
    These are related but not identical issues. Their causes are outlined in Intel-based Mac- Startup sequence and error codes, symbols. Solutions may be found in:
    A flashing question mark appears when you start your Mac
    Mac OS X- Gray screen appears during startup
    In most cases the problems may be caused by:
    Problem with the computer's PRAM - See Resetting your Mac's PRAM and NVRAM.
    Boot drive's directory has been corrupted - Repair with Disk Utility.
    Critical system files are damaged or deleted - Reinstall OS X.
    The disk drive is physically non-functional - Replace the hard drive.
    Repair the Hard Drive and Permissions
    Boot from your Snow Leopard Installer disc. After the installer loads select your language and click on the Continue button. When the menu bar appears select Disk Utility from the Utilities menu. After DU loads select your hard drive entry (mfgr.'s ID and drive size) from the the left side list.  In the DU status area you will see an entry for the S.M.A.R.T. status of the hard drive.  If it does not say "Verified" then the hard drive is failing or failed. (SMART status is not reported on external Firewire or USB drives.) If the drive is "Verified" then select your OS X volume from the list on the left (sub-entry below the drive entry,) click on the First Aid tab, then click on the Repair Disk button. If DU reports any errors that have been fixed, then re-run Repair Disk until no errors are reported. If no errors are reported click on the Repair Permissions button. Wait until the operation completes, then quit DU and return to the installer.
    If DU reports errors it cannot fix, then you will need Disk Warrior and/or Tech Tool Pro to repair the drive. If you don't have either of them or if neither of them can fix the drive, then you will need to reformat the drive and reinstall OS X.
    The main difference if you are using Lion or Mountain Lion is that you must first boot from the Recovery HD:
    Boot From The Recovery HD:
    Restart the computer and after the chime press and hold down the COMMAND and R keys until the menu screen appears. Alternatively, restart the computer and after the chime press and hold down the OPTION key until the boot manager screen appears. Select the Recovery HD and click on the downward pointing arrow button.
    Reinstall Snow Leopard Without Erasing The drive
    1. Repair the Hard Drive and Permissions
    Boot from your Snow Leopard Installer disc. After the installer loads select your language and click on the Continue button. When the menu bar appears select Disk Utility from the Utilities menu. After DU loads select your hard drive entry (mfgr.'s ID and drive size) from the the left side list.  In the DU status area you will see an entry for the S.M.A.R.T. status of the hard drive.  If it does not say "Verified" then the hard drive is failing or failed. (SMART status is not reported on external Firewire or USB drives.) If the drive is "Verified" then select your OS X volume from the list on the left (sub-entry below the drive entry,) click on the First Aid tab, then click on the Repair Disk button. If DU reports any errors that have been fixed, then re-run Repair Disk until no errors are reported. If no errors are reported click on the Repair Permissions button. Wait until the operation completes, then quit DU and return to the installer.
    If DU reports errors it cannot fix, then you will need Disk Warrior and/or Tech Tool Pro to repair the drive. If you don't have either of them or if neither of them can fix the drive, then you will need to reformat the drive and reinstall OS X.
    2. Reinstall Snow Leopard
    If the drive is OK then quit DU and return to the installer.  Proceed with reinstalling OS X.  Note that the Snow Leopard installer will not erase your drive or disturb your files.  After installing a fresh copy of OS X the installer will move your Home folder, third-party applications, support items, and network preferences into the newly installed system.
    Download and install Mac OS X 10.6.8 Update Combo v1.1.
    Reinstalling Lion/Mountain Lion Without Erasing The Drive
    Boot to the Recovery HD: Restart the computer and after the chime press and hold down the COMMAND and R keys until the menu screen appears. Alternatively, restart the computer and after the chime press and hold down the OPTION key until the boot manager screen appears. Select the Recovery HD and click on the downward pointing arrow button.
    Repair the Hard Drive and Permissions: Upon startup select Disk Utility from the main menu. Repair the Hard Drive and Permissions as follows.
    When the recovery menu appears select Disk Utility. After DU loads select your hard drive entry (mfgr.'s ID and drive size) from the the left side list.  In the DU status area you will see an entry for the S.M.A.R.T. status of the hard drive.  If it does not say "Verified" then the hard drive is failing or failed. (SMART status is not reported on external Firewire or USB drives.) If the drive is "Verified" then select your OS X volume from the list on the left (sub-entry below the drive entry,) click on the First Aid tab, then click on the Repair Disk button. If DU reports any errors that have been fixed, then re-run Repair Disk until no errors are reported. If no errors are reported click on the Repair Permissions button. Wait until the operation completes, then quit DU and return to the main menu.
    Reinstall Lion/Mountain Lion: Select Reinstall Lion/Mountain Lion and click on the Continue button.
    Note: You will need an active Internet connection. I suggest using Ethernet if possible because it is three times faster than wireless.

Maybe you are looking for