G41 BIOS problem (i think!)

When I start up my thinkpad it tries to go through the BIOS only to get the flashing message E+ Err 5! Run Recover! on the bottom left hand side of the screen.
Does anyone know what I can do or have experienced this before? Any help is much appreciated.
I do not have any software or bootable disks for this machine

unfortunately i went to the dreaded 'g disk' and erased my entire hard drive. Then I through in the OS disk and started from scratch. The laptop is running fine now but it erased everything.

Similar Messages

GTX 660M black screen with Nvidia driver, maybe a BIOS problem

Hello Svet,
I need help with this please, if it is indeed a BIOS problem:
https://forum-en.msi.com/index.php?topic=254620.0
My laptop uses the Aptio Setup Utility Version 2.10.1208
BIOS Version: E16F2IMT.300
BIOS Build: 05/31/2011
EC Version 16F2EG61 Ver4.22
EC Build 04/21/2011
I found a new BIOS for it following the link from the Power Pro official site, but I have no idea if it would do the job.
http://www.msi.com/support/nb/GT683.html#down-driver
This is my laptop:
PowerPro R 11:36-560
MSI 937-16F231-004
If you can help me, I will gladly donate.
Thank you,
Fox

Quote
Ok, from you're answer I understand that flashing the GPU with a compatible vBIOS is either not a solution for the problem,
yes don't think that can help for this case
and also will be high risky to brick your card
and even if its not bricked[survive flashing] don't think that can change anything
eventually you can try flashing your system notebook BIOS to the latest version for your notebook,
to check if that can helps by chance.
For it you have to ask your notebook vendor [power notebooks]
to provide you with the latest BIOS for your NB
rather than this don't think any modded stuffs can help with this.

Bios problem

bios problem on msi k8t neo via chipset..
my pc was perfectly working , but this morning after when i booted if findid i surprise..
my pc didn't started: "boot failure..."
from the bios is disappeard the first hd....
the bios recognize the slave hard drive and the one set on the 3° ide raid channel.
the firs hard disk and the two dvd device set into the second ide channel are not recognize and into the standard cmos features are set "not installed"
clear the bios wwith the jumper on the mainboard didn't solved the problem...
if you kou what is happend...
(i don't think that it's an hard disk problem...)

Disk was a Win2K NTFS Dynamic disk, so I extracted all the data onto the other disk in another computer, vaped the partition and turned it back to "Basic" style disk (I think this removes MS's extensions to the partition table) before unplugging. Then put it in the AMD64 box, created partition & formatted to Ext3 with Linux tools, so I think there's nothing wrong there.
The jumpers & cable are as you recommend - originally the master was in the middle of the cable, but I'd already swapped it last night in an effort to see if the cable connector was at fault. It's just the intermittant failure (about every other cold boot or so) which pisses me off (reminds me of all those random memory failures, before I limited to DDR333). As I said above, I'll replace the cable when I turn off tonight & see what that does.
Tyrken.

MS-7235 Virtualization BIOS problem

I'm running Ubuntu Linux and am unable to run virtual XP because of a BIOS problem. Currently, I have the original BIOS which was Phoenix 1.1. Does anyone know if I update the BIOS if they resolved this issue?

Thanks for the reply.
I think it is a BIOS problem because installing a virtual XP machine within Ubuntu results in an error stating that the BIOS is not fully ACPI compliant. I thought that since I have the original BIOS installed that updating it to the current one might resolve the error. This computer should support virtualization.
Also, it is a little tough to determine the exact BIOS to update with at MSI. A number of motherboards come up when I search for MS-725. None of them have Phoenix BIOS
I am attaching the system info below:
product: MS-7235
vendor: MICRO-STAR INTERNATIONAL CO., LTD
version: REV:1.1
width: 32 bits
capabilities: smbios-2.4 dmi-2.4 smp-1.4 smp
configuration: boot=normal chassis=desktop cpus=2
*-core
description: Motherboard
product: MS-7235
vendor: MICRO-STAR INTERNATIONAL CO., LTD
physical id: 0
version: REV:1.1
*-firmware
description: BIOS
vendor: Phoenix Technologies, LTD
physical id: 0
version: 6.00 PG (12/17/2006)
size: 128KiB
capacity: 960KiB
capabilities: isa pci pnp apm upgrade shadowing escd cdboot bootselect socketedrom edd int13floppy360 int13floppy1200 int13floppy720 int13floppy2880 int5printscreen int9keyboard int14serial int17printer int10video acpi usb ls120boot zipboot
*-cpu:0
description: CPU
product: Intel(R) Core(TM)2 CPU 6400 @ 2.13GHz
vendor: Intel Corp.
physical id: 4
bus info: cpu@0
version: 6.15.6
serial: 0000-06F6-0000-0000-0000-0000
slot: Socket 775
size: 1600MHz
capacity: 3066MHz
width: 64 bits
clock: 266MHz
capabilities: boot fpu fpu_exception wp vme de pse tsc msr pae mce cx8 apic sep mtrr pge mca cmov pat pse36 clflush dts acpi mmx fxsr sse sse2 ss ht tm pbe nx x86-64 constant_tsc arch_perfmon pebs bts pni dtes64 monitor ds_cpl vmx est tm2 ssse3 cx16 xtpr pdcm lahf_lm tpr_shadow cpufreq
configuration: id=0
*-cache:0
description: L1 cache
physical id: a
slot: Internal Cache
size: 32KiB
capacity: 32KiB
capabilities: synchronous internal write-back
*-cache:1
description: L2 cache
physical id: b
slot: External Cache
size: 2MiB
capacity: 2MiB
capabilities: synchronous external write-back
*-logicalcpu:0
description: Logical CPU
physical id: 0.1
width: 64 bits
capabilities: logical
*-logicalcpu:1
description: Logical CPU
physical id: 0.2
width: 64 bits
capabilities: logical
*-memory
description: System Memory
physical id: 1f
slot: System board or motherboard
size: 1GiB
*-bank:0
description: DIMM Synchronous
physical id: 0
slot: A0
size: 1GiB
width: 64 bits
*-bank:1
description: DIMM Synchronous [empty]
physical id: 1
slot: A1
width: 256 bits
*-bank:2
description: DIMM Synchronous [empty]
physical id: 2
slot: A2
width: 256 bits
*-bank:3
description: DIMM Synchronous [empty]
physical id: 3
slot: A3
width: 256 bits
*-cpu:1
physical id: 1
bus info: cpu@1
version: 6.15.6
serial: 0000-06F6-0000-0000-0000-0000
size: 1600MHz
capacity: 1600MHz
capabilities: vmx ht cpufreq
configuration: id=0
*-logicalcpu:0
description: Logical CPU
physical id: 0.1
capabilities: logical
*-logicalcpu:1
description: Logical CPU
physical id: 0.2
capabilities: logical
*-pci
description: Host bridge
product: 82P965/G965 Memory Controller Hub
vendor: Intel Corporation
physical id: 100
bus info: pci@0000:00:00.0
version: 02
width: 32 bits
clock: 33MHz
*-pci:0
description: PCI bridge
product: 82P965/G965 PCI Express Root Port
vendor: Intel Corporation
physical id: 1
bus info: pci@0000:00:01.0
version: 02
width: 32 bits
clock: 33MHz
capabilities: pci pm msi pciexpress bus_master cap_list
configuration: driver=pcieport-driver
*-display
description: VGA compatible controller
product: G71 [GeForce 7900 GS]
vendor: nVidia Corporation
physical id: 0
bus info: pci@0000:01:00.0
version: a1
width: 64 bits
clock: 33MHz
capabilities: pm msi pciexpress bus_master cap_list
configuration: driver=nvidia latency=0 module=nvidia
*-usb:0
description: USB Controller
product: 82801H (ICH8 Family) USB UHCI Controller #4
vendor: Intel Corporation
physical id: 1a
bus info: pci@0000:00:1a.0
version: 02
width: 32 bits
clock: 33MHz
capabilities: bus_master
configuration: driver=uhci_hcd latency=0 module=uhci_hcd
*-usb:1
description: USB Controller
product: 82801H (ICH8 Family) USB UHCI Controller #5
vendor: Intel Corporation
physical id: 1a.1
bus info: pci@0000:00:1a.1
version: 02
width: 32 bits
clock: 33MHz
capabilities: bus_master
configuration: driver=uhci_hcd latency=0 module=uhci_hcd
*-usb:2
description: USB Controller
product: 82801H (ICH8 Family) USB2 EHCI Controller #2
vendor: Intel Corporation
physical id: 1a.7
bus info: pci@0000:00:1a.7
version: 02
width: 32 bits
clock: 33MHz
capabilities: pm bus_master cap_list
configuration: driver=ehci_hcd latency=0 module=ehci_hcd
*-multimedia
description: Audio device
product: 82801H (ICH8 Family) HD Audio Controller
vendor: Intel Corporation
physical id: 1b
bus info: pci@0000:00:1b.0
version: 02
width: 64 bits
clock: 33MHz
capabilities: pm msi pciexpress bus_master cap_list
configuration: driver=HDA Intel latency=0 module=snd_hda_intel
*-pci:1
description: PCI bridge
product: 82801H (ICH8 Family) PCI Express Port 1
vendor: Intel Corporation
physical id: 1c
bus info: pci@0000:00:1c.0
version: 02
width: 32 bits
clock: 33MHz
capabilities: pci pciexpress msi pm bus_master cap_list
configuration: driver=pcieport-driver

Ideapad n581 bios problem

I tryed to flash my bios using Lenovo program on their support site. Everything looks fine, but when it asks me to reboot bios could not find my hard drive any more...any suggestions?
When I boot using bootable usb windows repair it can find all the partitions in cmd and so on...but in bios boot menu theres only IPv6 and IPv4 + usb. What is wrong here? I've done nothing, but use lenovo program...

I think I have the same problem.I changed the harddrive and installed Windows 7 and now I'm not able to access the bios. I think it is the same issue in this threads:http://forums.lenovo.com/t5/IdeaPad-Y-U-V-Z-and-P-series/Z580-BIOS-Dead-after-SSD-install-no-F2-F8-F12-ORIGINAL-DRIVE-NO/m-p/904923/highlight/falsehttp://208.74.204.134/t5/IdeaPad-Y-U-V-Z-and-P-series/z580-can-t-access-bios-setup-or-boot-menu-after-changing-to/td-p/812737/page/3 The support does not now the problem yet :-(

Power of the Press - MSI Neo4 SLI Bios Problem

For those interested, I just sent this to hardocp because they did the review on the MSI SLI Platinum. Since MSI headlines this review on their website, maybe hardocp can do something about this bios problem. Enjoy and please send more emails to hardocp so we can get this problem addressed! Believe me, Ive seen this works with washington politicians, I know it can work if we all do it.
I appreciate companies like yours doing extensive reviews about products. However, your review caused me and a whole bunch of others to purchase this board with enormous problems associated with it (check out the msi forums). The problem is that this board works only for 130nm chips in which you tested on. On the newer amd 90nm chips, this board is the worst performing sli board out in the marketplace (for both winni and venice core chips). You need to do something to stop people from buying this board because its just awful and the folks from MSI are silent on the subject.
It's gotten so bad that people have gone out and purchased other sli boards, transferred all of the equipment out of it and into the new one and guess what...voila, no problems. Anyway, some of those in the other user forums had the same problem but those other manufacturers quickly fixed the problem. Its just getting worse and worse. I feel like both msi (and I am MAD) and reviewers like you (unless you don't know about the problem) are silent on this and its cost me hard earned MONEY ($175 for the mobo) and hours and hours of time...
You have a LOT OF POWER with MSI and I can see it because they headline your review on their website (power of the press). For Gods sake, please do something before others make the same mistake or if you can get MSI to allocate resources to fix the problem...you would be HEROs! Thank you.

Quote from: Husker_Faithful on 19-May-05, 11:56:11
Ok, I guess I am confused some, where is the issue with the new cores? I have no issues running the San Diego core and the my memory at the listed and published speeds.....
Quote
Also is your MOBO the SLI type? I run the SLI Neo4 with a San Diego core without any issues. In fact I dropped it in and booted using the San Diego as a direct replacement for a older (if 6 months is old!!) 3500. I have OC'ed with Corecetner as far as I can push it and runs awesome!
Quote
GUys, I am not sure exactly what issues you are experiencing as there can be MANY factors! But my SLI Neo is running awesome! It overclocks (no Tiresmoke, i won't go into that in this forum ) and has NEVER once BSOD, or rebooted or even crashed! Not once and I push the crap out of this as it is my gaming box. Also TS you are SO correct on the clock settings on the ultras, you gotts make sure they are the same or it will cause issues. The only thing I am kinda bummed about is the lack of real performance with the dual 6800 Ultra's, but that is a Nvidia issue not MSI. Guys I may be blessed, but I have run three Neo MSI brds, 2 939 and 1 754 and never had any issues....
Quote
I have yet to experience any boot/reboot issues...So I think we should wait to hear more from this person before we assume anything...
Quote
I have the nForce4 SLI brd and i run a new San Diego..it booted up fine and zero problems. But man is this thing FAST
Quote
According to MSI, the Neo4 will work fine with the new cores, the Neo2 will need a bios upgrade
Quote
I set my brd up the first time for SLI with dual cards and have never had any issues..Sorry guys, but I guess it's the luck of the draw, but I have yet to ever ave an issue with any MSI brds..I have a Neo2,Neo4 and the older 754 slot Neo..no issues.
7 of your last 11 posts. Why man? Why?
This is from MSI at the "listed and published speeds"
Dear Customer,
Since the mb has not been certified to support the Venice and San Diego Core processors, please wait until beginning of June, 2005 for the release bios support for the mb.
Sincerely,
Technical Support Division
MSI Computer Corp.
As for overclocking have you read these?
https://forum-en.msi.com/index.php?topic=75897.0
https://forum-en.msi.com/index.php?topic=79534.0
https://forum-en.msi.com/index.php?topic=79827.0
Look, I have already been threatened to be banned because of my sarcastic replies to you. Read every one of your responses I listed. Obviously OTHERS are having problems. WHY don't you help them instead of TAUNTING people that yours works. They are upset, and you make them feel dumb like it's their fault.
Man I have tried to contribute so much to this issue that at least 20 different members here are having, I have tested with an Asus SLI board, I have tried different BIOS's and posted results, I have theorized with others and I feel like you are slapping me in the face by restating time and time again "what problem mine works great"i
I'm on a verbal warning because I didn't have respect for you. Well how are you respecting the other people who have problems by saying you don't know what their issue is. Read up on it or help them, instead of creating tension. Please?

Neo2 Bios Problems ?

Hello all, hoping that i could get some help here as I've wasted 2 days on this problem with no resolution in sight, first my specs:
K8N Neo2 Platinum
FX-53
1GB Corsair XMSPro PC4000 ddr ram
1 X WD Raptor 74Gb
1 X 300gig Maxtor MaxLine III
Antec NeoPower 480w PSU
When I power up my rig it has a problem when detecting the Raid arrays, I have installed XP on the raptor and hooked up the maxline but 8 times out of 10 it will just sit at "detecting arrays", I have to keep pushing reset until eventually it will detect the drives straight away and continue to boot, whether it actually does boot or not is a different matter however as it regularly freezes just as the xp logo comes up. I reckon that I get the system to boot maybe 1 out of every 25 times I try which is not good to say the least.
To make matters more mysterious I have tried to boot from floppy MaxBlast 3 and also Powermax to diagnose the drives, the system will freeze just after "starting Caldera Dos", there are no problems with any other dos based programs which is infuriating as it's this one I need to check the bloody drives !
Just to clear matters up I have disconnected everything from the board except the drives and it's the same, I have also tried each drive just connected on it's own and it's the same.
Is this a bios problem ? Would trying a beta bios fix this ? TIA guys .

When you installed XP on the sata drives, what did you use in the way of drivers?
Some have found that they haven't needed to install any drivers for a single drive.
Sounds to me like you have tried too many combinations for it to be that, but see thread.
Thinking...tried it with a single stick of ram after clearing CMOS?

I have a problem with iPhone is that I can replace it at points of sale in the U.S. because I bought from Saudi Arabia because the problem I think in the hard ware software worked more than 3 times did not fix

dears,
I have a problem with iPhone is that I can replace it at points of sale in the U.S. because I bought from Saudi Arabia because the problem I think in the hard ware I do resoftware more than 3 times did not fix.
Network also always missing.
I am living in KS Wichita. I hope you help me pleas.
Regards.

iPhone warranty is not international. You will have to return your
iPhone to Saudi Arabia for repair/replacement. Either take it back
yourself or send to friend/relative for them to take to Apple. Apple
will not accept international shipments for repair nor will Apple
ship repaired/replaced iPhones out of the country where the repair
was done.

I have a question my iphone4s has a problem when updated iOS8 there will be freeze problem i think iOS8 is not supported in 4s!!!!!!!!!

i have a question my iphone4s has a problem when updated iOS8 there will be freeze problem i think iOS8 is not supported in 4s!!!!!!!!!.
one more question when i phone5 update with iOS 8.1.2 this iOS supported iphone5???

Hi Ios 8.1.2 Should work on iPhone 4s / 5 You may have a bug Backup to cloud over WiFi Then Restore back to Factory Settings This will make iPhone as new. Use same Apple ID & you will get your Apps & Data back Do Restore over your WiFi. Cheers Brian

I am having the same problem I think. With mobileme you simply copy documents to the idisk folder and then synch. I cannot seem to sink that folder anymore. Any idea as to how I can simply copy folders to icloud and then access the MS Word and PDF file

I am having the same problem I think. With mobileme you simply copy documents to the idisk folder and then synch. I cannot seem to sink that folder anymore. Any idea as to how I can simply copy folders to icloud and then access the MS Word and PDF files on my iphone?

Apple never bopthered to explain that this would happen
Your iDisk is still accessible after moving to iCloud in exactly the same way as before. Nothing is deleted until June 30th 2012.
, so I could easily have lost ALL of the files I kept on iDisk.
No, you couldn't. Firstly, nothing was deleted from your iDisk. Secondly, any files stored on your iDisk should never be your only copy. Even if your iDisk spontaneously combusted, you should keep local backups elsewhere.
Does Apple WANT people to move their storage elsewhere and stop paying Apple for it?
Yes. Apple doesn't provide such a service anymore, nor are you paying them for it.
Apple has made no effort to suggest remedies for the problem it has given iDisk users
They've provided instructions on how to download your files from your iDisk. What you do with them after that is your choice.

MSI GT70 (0NE-452) Refuses to Boot/random shut downs - BIOS problem?

Hello,
I recently purchased a MSI GT70 0NE-452 laptop from Xotic PC. It came with Windows 8, but since Windows 8 broke most of Adobe Premiere, Vegas, and After Effects, I wiped the RAID0 SSDs and installed Windows 7. I've reinstalled all the drivers and have been comfortably setup for about a week or 2. Unfortunately now, the laptop has been behaving strangely.
1) Random shutdowns, regardless of whether I'm connected to power or not. And I know it isn't because the battery died. (This might be fixed now since I downloaded another driver for the CPU Thermal Control)
2) Laptop won't turn on first-try. I press the power button and the power button flashes orange but nothing happens. It will only turn on once I've removed the battery and put it back in.
I have a feeling this could be a BIOS problem, and possibly attributable to the Windows 7 reformat, but I'm not sure. My BIOS is currently: American Megatrends Inc E1762MS.50U, 11/23/12.
The MSI website for my model has a Bios update:
Release Date: 2012-12-14
Description: Fix HDMI/DP hot plug no function after S3 resume
Non-Win8
E1762IMS.30R
Can someone please advise? Should I try my hand at flashing the BIOS with this update and hope it solves the problem, or should I just call MSI and get it fixed by them?
Any help is much appreciated, thank you very much!

I'll take your advice but can you clarify a bit? Is it something beyond a BIOS repair?

G580 (20150) Running slow, Bios problem

Hello
I got a little problem with my lenovo g580.
Not a long time ago i downloaded the bios update from the site and I did everything right but after my laptop restarted I got the message that said that I have to put in the disk of some sort so I checked on the internet if there is something I could do about that. I went to bios and changed the boot option to Legacy BIOS boot mode but after that everything worked fine but after that I noticed performance decrease on the laptop (Longer boot and longer wait time to open programs for about 1st few minutes after the boot).
I would like to use Lenovo recovery program to recover system setting to the factory setting but IM scared to do that cause of the bios problem I had.
I would really like someone to help me with this problem.
Best Regards

Hi SloAki,
Welcome to Lenovo Community Forums!
I’m sorry to hear that the computer is not performing as expected, I suggest you to perform the below steps provided to increase the performance of the computer then perform OKR (One Key Recovery) if required if the issue persists even after performing the troubleshooting steps.
Optimize Windows for better performance
Click here to download User Guide and perform OSRI (Operating System Re-Install) using OKR (One Key Recovery) by clicking on NOVO button provided in the computer, to perform OSRI and refer page no. 2 to locate the NOVO button and page no. 34 for the steps to perform OKR.
NOTE: Please backup the data in the computer before performing OSRI, as the data will be completely erased.
Hope this helps!!!
Do post us back for further queries.
Best Regards
Shiva Kumar
Did someone help you today? Press the star on the left to thank them with a Kudo!
If you find a post helpful and it answers your question, please mark it as an "Accepted Solution"! This will help the rest of the Community with similar issues identify the verified solution and benefit from it.
Follow @LenovoForums on Twitter!

[VIA] MSI KT880 Delta-FSR Bios problem

Hi!
I have MSI KT880 Delta-FSR motherboard.My problem is that about every second time when i start my pc BIOS settings will be factory settings.I have to go to bios and change every settings again away.

I have 120mm fan with my cooler.Temperature of the prosessor is about 44-47 celcius.Cooler is over one year old.
I have 2*512M PC 3200 memory.They are not same brand/make.In start i have one memory stick, 512M/Kingston and the problem was same.
All the answers are good what you are writing but i dont understand how those have an effect my BIOS problem ??Sometimes when i start my pc memory clock fz is 266 and its should be 400.I have to go bios the change it and like i write earlier put the onboard lan and ac97 enable.
I close pc this morning when i goto school.When i come afternoon home and turn my pc on i have this message:
"Scan devises,please wait...."
Hardware initiate failed,please check device.The bios does not be installed!Press(g) to continue.
Reboot and select proper boot device.When i do that there is only my cd-rom device.I cant choose HDD drive at all.
I shut down the pc and take another computer ( i have 5) bios battery and the pc start at once.Now i have tho follow can the problem be a consequence of that.

Need help, i'm suspecting its a BIOS problem

I dunno whether i should consider this a BIOS problem or something. But I hope someone could help me find the fault.
Okay, here goes:
When i first turned on my computer, i had this strange BIOS error (I could not remember sorry), then my PC rebooted as usual, but after the Windows XP loading screen, a black screen and a cursor appears, and the PC hangs. I rebooted the PC and my monitor could not receive a signal from the CPU. I tried using my old analog display cable, but it did not work. I then tried plugging the monitor to my laptop. It worked. Then I tried replacing my Radeon 9600XT with my old Geforce 2 MX, but again, it did not work. I checked the inside of the PC and all of the fans (the mobo and the graphic card ) were working.(This was before i plugged in the Geforce2 MX card). I also tried resetting the bios, but it did not work.
Here's my specs
P4C 3.0GHZ
MSI Neo2-S 865PE
2x 256mb Kingston HyperX
Sapphire ATI Radeon 9600XT
120GB Maxtor SATA HDD
30GB Maxtor IDE HDD
Creative Audigy 2 ZS
Iomega CD-R
one DVD drive
Eizo 15" LCD monitor
I'm totally clueless.. any help would be greatly appreciated

What s y a running? Anything like style xp?
I've had a prob with the thing after I installed it and combined it with
TweakXP pro4 & SP2 .
I then owned a Fujitsu-Siemens TFT and when I switched it to auto mode,
it sometimes was fixed. Check if there is an auto-function on your CRT.
Problem is, according to me, something with the Kernel.
Should try booting it with the orginal boot.ini.
But just to be sure:
Enter the bios, load optimized bios. Could check to be sure if the
aparture size of the AGP is set to the amount of mem available
on the GraphCard and check if the sequence AGP/PCI is there.
During boot, F7 see whats available for OS and take the orignal boot file.
Could try in the boot.ini to delete the /kernel at the end of the sentence.
Dunno if it's gonna help you but it helped me.
Greetz from Belgium

Fixed my MB BIOS problem Today Z68 GD65 G3

Flashed the newest official BIOS from the MSI WEB site and then I had a problem.
The problem was that my Spread Spectrum was unable to be switched to unable in the BIOS. Worked fine before flashing BIOS.
Problem first happened after using M-Flash method. Then I flashed it using the Live 5 update method and the problem was still there. Tried a few different Official and Beta BIOS flavors and the problem remained.
After trying the official MSI BIOS flashing methods and having problems I then used the bullet proof MSI HQ Forum USB flasher.... Didn't work.
With each flash I disabled security on the dual BIOS flash and flashed both BIOS chips. I also tried a BOOT from BIOS on different BIOS flavors.
Nothing seemed to work to fix my BIOS problem.
Then like a lighting bolt in the night I saw the light!!
I fixed my problem by returning the the MB to the store for exchange.
Problem solved.

Well we all know this BIOS is a work in progress and for whatever reasons my BIOS is still buggy. I'm going on my 2nd month of problems trying to get the BIOS to work right.
For the last week I have been trying to get this MB to over clock with auto voltage while maintaining the power efficiency features and increasing the Turbo Boost limits.
With the new MB and new fresh official BIOS my MB still doesn't allow for this feature to work. I even took my 2500k back to the store to exchange because I thought it may be the CPU.
Great thread to read about setting this configuration up.
http://forums.overclockers.co.uk/showthread.php?t=18340310
Any help on this subject is appreciated.

G41 BIOS problem (i think!)

Similar Messages

Maybe you are looking for