G410 Lenovo Easy Camera Driver : No appropriat​e driver to be installd.

HI i have this one problem about my camera.
My product is Lenovo G410 and supports Lenovo Easy Camera 
The problem is the camera is too dark and has low quality.
but the driver of this camera wont install and gave me a prompt message :
No appropriate driver to be installed. 
I tried the BIOS default one but it still doesnt work.
My OS is Windows 8.1 
i tried many os drivers for this camera but still wont work.
Please i need a reply as soon as possible.
This is a new product, im planning to send this back to the store where i bought it. 
Thank you in advance for your suggestions.
Moderator Note; subject edited

Hi Jarvs,
Welcome to Lenovo Community!
I’m sorry to hear about the situation and understand the concern. As the issue persists even after re-install the OS (Operating System) and drivers, I would strongly suggest you to contact our Technical Support for further Assistance to get the details of the nearest Authorized Service Center to get the issue analyzed.
Click here to open a link where you can select the country and get the exact contact support number. I’m sure they will be a great help.
Do post us back for further queries.
Best Regards
Shiva Kumar
Did someone help you today? Press the star on the left to thank them with a Kudo!
If you find a post helpful and it answers your question, please mark it as an "Accepted Solution"! This will help the rest of the Community with similar issues identify the verified solution and benefit from it.
Follow @LenovoForums on Twitter!

Similar Messages

  • Lenovo Easy Cam Won't work after Windows 10 install

     I have a V570 Lenovo laptop on which I just installed Windows 10. After the install, I found that my camera no longer works -- it's the Lenovo Easy Cam. I tried driver updates. Apparently the drivers were downloaded but failed to install. I can't figure out HOW to get them to install. I tried the device manager. I also took a look with Lenovo Solutions. It says the camera is disabled, but it doesn't tell me how to re-enable it. I'm at a loss. How can I get my camera to work with Windows 10? Thanks.

    Hi Swahili1,I have a Lenovo Ideapad Y570 and I have also recently upgraded from Windows 7 Professional to Windows 10. In fact I had the same problem as other persons i.e., the easy camera of my laptop was disable and I couldn't manage to update the drivers correctly and make it function. I did as you described, with the difference that in my case I couldn’t enable the camera from Device Manager. What I did is that I have only uninstalled the program of the easy camera going to: Control Panel\Programs\Programs and Features and then I have restarted my laptop. As you said most probably, Windows 10 detected the camera and installed the appropriate program and now my camera is functioning. Thanks a lot Swahili1.

  • Vista home primium unable to reconaize Lenovo Easy camera..

    I have uninstall Lenovo Easy camera from device manager but now I am note able to intall it again... windows is not able to recoganize it it shows as unknown device...

    It's shown as an unknown device because the right driver is not installed. Have you tried to download/install the latest camera driver from Lenovo's website?
    John B @ forum.notebookreview.com

  • Lenovo easy camera

    i have lenovo ideapad s206 netbook . i updated it from home basic to professional but now i am not being able to use .camera . whenever i install the camera driver which i got with my pc it says 'connect lenovo easy camera first ' but i have a built in camera.

    Hi nirnirbhay,
    Thanks for Posting and welcome to the Lenovo Community,
    I’d like to ask you to check the driver of the camera in the device manager and please share with us if there is any excalamation mark on the driver it will be under the name Imageging Device,
    Then could you please uninstall the driver and install the below driver:
    http://support.lenovo.com/en_AE/downloads/detail.page?DocID=DS027689
    http://support.lenovo.com/en_AE/downloads/detail.page?DocID=DS027673
    And after installing the drivers please try to use the cam and share with us what is the application that you’re trying the Cam with.
    Hope the information helps. Let us know.
    Regards
    Soha
    Did someone help you today? Press the star on the left to thank them with a Kudo!
    If you find a post helpful and it answers your question, please mark it as an "Accepted Solution"! This will help the rest of the Community with similar issues identify the verified solution and benefit from it.
    Follow @LenovoForums on Twitter!

  • Lenovo Easy Camera Image quality Very poor - G 510 - Windows 7

    I have a G 510 with integrated camera. 
    I tired to download the drivers from the website. after installation, i get a message with a check box . Install driver (AVC now.
     further No appropriate driver to install. 
    Solved!
    Go to Solution.

    Hi Brprakash,
    Welcome to Lenovo Community Forums!
    I’m sorry to hear that the webcam driver is not installing completely in your G510 Laptop, I suggest you to download the driver once again and then while installing the driver right click on the downloaded file and select “Run as administrator” option to get it installed without any error.
    Do post us back if the issue still persists.
    Best Regards
    Shiva Kumar
    Did someone help you today? Press the star on the left to thank them with a Kudo!
    If you find a post helpful and it answers your question, please mark it as an "Accepted Solution"! This will help the rest of the Community with similar issues identify the verified solution and benefit from it.
    Follow @LenovoForums on Twitter!

  • Lenovo easy camera s200

    i have a netbook ideapad s 200 windows 7 ultimate. i already have a easycapture driver but stil cant use it. it always says it is failed to open camera. what do i need to do? i check my device manager and it is says my imaging devices which is usb2.0 1080p UVC camera is not available. please help me.

    Hi khate,
    Welcome to Lenovo Community Forums!
    First make sure you have the Functions (Fn) is working try other Fn Key like
         Fn+F5 for the wireless or FN+ up and down arrow to adjust the Brightness.
          If those are working go ahead and Press FN +esc, This should On/OF the Camera. See if that works.
          If other FN functions are not working. Please install this  Lenovo Energy Management and try the FN+Esc
    If the steps above did not help
    Under Device manager  can you try doing a right click on the USB2.0 UVC camera and choose properties.
                  Go to the details and choose Hardware Id on the Property and paste back the Hardware Id value here.
    Hope this helps,
    Cheers!
    Did someone help you today? Press the star on the left to thank them with a Kudo!
    If you find a post helpful and it answers your question, please mark it as an "Accepted Solution"! This will help the rest of the Community with similar issues identify the verified solution and benefit from it.
    Follow @LenovoForums on Twitter!

  • Lenovo G510 Camera Dark Poor camera Result Issue

    Hi
    i got new Lenovo G510 last week windows 8 64bit operating system core i3
    In its specs it se clearly shown that it have 720 p hd camera but when i opened the camera app from start menu it only shows 0.1MP (4:3) and 0.3 (4:3) option and result is so dark and laggy 
    I checked the driver in device manger it shows properly installed by this name 'Lenovo Easy Camera" driver details are Microsoft driver version 6.2.9200.16664
    i tried to update it from internet but it says its updated
    i tried manually install the driver from here " C:\drivers\Camera Driver (AVC, Liteon, Bison, Chicony)" but Warning message pops up  " NO APPROPRIATE DRIVER TO B INSTALLED"
    Then i tried to install it from her C:\drivers\Camera Driver (AVC, Liteon, Bison, Chicony)\HD\Bison\3.13.301.1
     but setup gets "failed" at the end and says "please plugin the device and restart the setup"
    PLEASE HELP ME PLEASE

    hai13h wrote:
    I bought g510 week ago and the camera is terrible black, and blur i tried many drivers many ways but nothing succed... how to fix it!

  • Easy camera not working s200

    i lost my IP lenovo easy camera,waht should i do?thanks.
    Solved!
    Go to Solution.

    hi rizky21,
    Welcome to Lenovo Community Forums!
    Did you mean that you're missing the Lenovo Easy Camera Software.
       Can you try going to Control Panel/  Programs and Feature / Uninstall a program and make sure it is not there.
    If an Easy camera software, then Uninstall it and Download one below according to your Operating System.
    Vista 32-64bit
    Lenovo Easy Camera Driver
    IN1CAM28WW3.exe
    18.17MB
    Windows 7 32-64 bit
    Lenovo Easy Camera Driver
    IN1CAM16WW5.exe
    8.17 MB
    Let me know if your concern is Different.
    Best Regards
    Solid Cruver
    Did someone help you today? Press the star on the left to thank them with a Kudo!
    If you find a post helpful and it answers your question, please mark it as an "Accepted Solution"! This will help the rest of the Community with similar issues identify the verified solution and benefit from it.
    Follow @LenovoForums on Twitter!

  • Lenovo G555. Easy camera.

    Hello.
    I want to receive the images in YUV format instead RGB.
    How i can set this parameter in Easy Camera Driver

    hi fufufufufu,
    i may be wrong but i don't think it's possible to change the image format within the easy camera driver.

  • G550 Easy Cam is not detecting

    Dear all,
    Am having a Lenovo G550. Recently i was changed its HDD and installed Windows vista 32bit from an OEM DVD after the installation my easy cam is not detecting by the windows. then I tried to install the driver, that time no matching device found message is comming. even the cam is not appear in the windows device manager also.  Anybody please help me to resolve the is please..
    Thanks
    Aby

    Hi Kkpsblesaint,
    Welcome to Lenovo Community!
    I’m sorry to hear that Webcam is not working as expected after upgrading the OS (Operating System) to Windows 8, I suggest you to check if the Webcam is getting detected in “Device Manager” after enabling the Webcam by pressing Fn+Esc keys on the keyboard.
    Do post us back if the issue persists.
    Best Regards
    Shiva Kumar
    Did someone help you today? Press the star on the left to thank them with a Kudo!
    If you find a post helpful and it answers your question, please mark it as an "Accepted Solution"! This will help the rest of the Community with similar issues identify the verified solution and benefit from it.
    Follow @LenovoForums on Twitter!

  • [Lenovo Easy Capture] tiny review warning - Pictures Included

    [Lenovo Easy Capture]
    tiny overview what you can do with integrated webcam
    do more than capture pictures...
    you can get here Download Lenovo Easy Capture & for Windows 7 here Easy Capture W7
    designed for Ideapad U/Y-Series - Vista... but works in all windows
    like XP / Vista /  Windows 7 on the slim S-Series as well
    after install...and starting..
    cam would be activated & you could see ... yourself  in a mirror so keep smiling
    starting in photo mode
    with a nice turn effect
    between the modes switch to video mode
    next icon switch to Photo Gallery
    next icon switch to Video Gallery
    next icon switch to Special Effects
    you can choose a frame for some events..
    switch to
    last Icon sets parameter for the cam System Setting
     Settings page
    size can set to
    640x480
    320x240
    160x120
    352x288
    176x144
    1280x1024
    next you can set brightness, contrast, saturation, sharpness and gamma...
    this is an example pic i used here...
    ... give it a try, its Easy
    sincerely KalvinKlein
    Want more ? For further information to get the most of your S-Class machine
    Lenovo Energymanagement 
    Backup
    Windows 7 Driver 
    Windows 7  Install
    Clean XP Install
    XP Startup
    Small WebCam Guide
    Lenovo Easy Capture
    Resolution > 1024 x 576 / 600  Works with XP Only For Windows 7 Alternate driver section
    Moderator Note; Picture warning added
    Thinkies 2x X200s/X301 8GB 256GB SSD @ Win 7 64
    Ideas Centre A520 ,Yoga 2 256GB SSD,Yoga 2 tablet @ Win 8.1

    Wow, what a great review. But that's expected from a writer. I had an HTC Touch but it had to be rebooted after 20 to 30 minutes of play. It got kinda boring. I cant put this iphone down.
    You forgot to add you can do full sentences without abbreviating when texting or emailing. It's that easy!

  • Lenovo T410 Camera Problem in win 8.1

    Lenovo T410 Camera is not properly working in win 8.1. At very first instant it will show image and after 6 or 7 seconds of its running image got still view. I've uninstalled cam driver and then install it to check its accuracy but all in vain. Anyone can help me to solve this issue...............
    Problem resolution will be highly appreciated...

    Hi,
    be sure the following drivers/applications are installed:
    - Lenovo Power Management drivers
    - Lenovo Settings Dependency Package
    - Lenovo Dependency Package
    - of course, camera drivers
    - metro app from ms store - Lenovo Settings
    x220 | i5-2520m | Intel ssd 320 series | Gobi 2000 3G GPS | WiFi
    x220 | i5-2520m | hdd 320 | Intel msata ssd 310 series | 3G GPS | WiFi
    Do it well, worse becomes itself
    Русскоязычное Сообщество   English Community   Deutsche Community   Comunidad en Español

  • Lenovo X300 camera not working

    Hi, The Lenovo X300 camera is not working. The driver is also missing. I tried to re-install the drivers with no success. Furthermore - I can not see the imaging devices on the device manager.
    Please assist
    Thanks

    maybe you should try to remove the SP3 and use SP2 instead

  • Lenovo 3000 N200 0769 Vista 32bit video driver (NVidia) full screen video problem

    Hi, would appreciate an update from Lenovo about this.
    The NVidia VGA driver just displays a blank screen when playing video in full screen mode when hardware acceleration is turned on (the default setting). Obviously it's a pain to turn off the hardware acceleration just to get full screen video working.
    There is a generic version of the driver available from Nvidia but they advise not to use it as the oem versions are apparently modified for features like turning the screen off when the lid is closed. Maybe someone's tried the generic NVidia driver and can let me know if it's worth a go. Ideally it would be nice to hear if Lenovo are aware of the problem and are going to release an update.
    Thanks
    Cliff

    im not sure if this will help new to forum but hey here u go anyways scan through the guide about the suipport & downloads should have all ur info there
    http://forum.lenovo.com/lnv/board/message?board.id=N_Series_Lenovo_3000&message.id=2652

  • We recently updated to Lion, prior to this update we could plug in our Sony Mini DV camera using the appropriate firewire and the iMovie would recognize the camera. This function no longer works after the update to Lion. Any suggestions?

    We recently updated to Lion, prior to this update we could plug in our Sony Mini DV camera using the appropriate firewire and the iMovie would recognize the camera. This function no longer works after the update to Lion. Any suggestions?

    Zap the PRAM and Reset the SMC, then try again.

Maybe you are looking for

  • Execute SQL Task: Cannot assign value to the variable

    DECLARE @PartitionDate varchar(8), @Date int SELECT @PartitionDate = MAX(PartitionDate) FROM PartitionLog (NOLOCK) SELECT @Date = MIN(DateKey) FROM DimDate WHERE CAST(DateKey as varchar(8)) > @PartitionDate IF NOT CONVERT(varchar(8),GETDATE(),112) =

  • SXMB_MONI error in R/3

    everything was successful in pi and when i checked in sxmb_moni in r/3 it has shown a error as below. PI is calling a inbound proxy in this proxy it is calling the bapi function module. I HAD CHECKED IN PI Mapping the field gl_account is string and w

  • identifier expected � why show up when I was trying to compile !

    When i was trying to add another botton as a " buttonAdd " I will get the error message so I would be glad to help me , please ! import java.awt.*; import java.applet.*; import java.applet.Applet; import java.awt.event.*; import java.awt.image.*; pub

  • Connecting my 550 Powerbook with Linksys 354G Gateway Kit

    Hello and help! I've just set up my iMac with the Linksys modem router and ethernet connection and all works OK. I now want to use the Linksys WPC54G V.5 PMCIA card that came with kit with my 2nd computer, a 550 PB.. I plugged the card into the PB an

  • 10G Forms-How 2 create link of searched file stored in DB?

    1. I've table named document which stores File_NAME, DOC_SIZE, LAST_UPDATED, etc. info; 2. I have .doc, .pdf, .txt files stored in the document table; 3. Using Oracle 10G Form Builder: -I've created form in which I can view the columns (NAME, DOC_SIZ