G42-230us notebook automatic bios update failure

Last month my HP g42-230us laptop started an automatic HP update to the BIOS.  I did not request this to happen, it just started.  Afterward, the computer shut off and did not restart like it said.  So, I pressed the start button and it starts up and once Windows starts to load, it turns off.  I have tried the Win + B as suggested in other discussions.  I tried this and the HP BIOS UPDATE goes through the entire process of "Writing new BIOS Image."  It goes through all 512 blocks.  Then it verifies the BIOS image through all 512 blocks.   I receive the System Bios Recovery is Complete; however, when it tries to restart, it just shuts off.  I wait and nothing occurs.  I press the start button and I'm back to the computer shutting off right when Windows starts to load.  I have tried the WIN + B with the battery in and without (as suggested in other forums.)  My HDD is fine because I was able to pull the files off of it using a SATA adaptor.  I'd appreciate any assistance that someone could give me to try and get the computer back up and running

Vishal_g42 you would have to check with support in your area for your warranty options. It seems unlikely they will extend your warranty on a malfunctioning product, until it was proved to be functional again.
TwoPointOh
I work on behalf of HP
Please click “Accept as Solution ” if you feel my post solved your issue, it will help others find the solution.
Click the “Kudos, Thumbs Up" on the bottom to say “Thanks” for helping!

Similar Messages

  • HP Notebook System BIOS Update (AMD Processor)

    Hello,
    I was looking through my updates and everything to make sure my computer is working to it's fullest. I noticed there was a recommended update that I should follow through with which is the HP Notebook System BIOS Update (AMD Processor), and I've download it and installed it, then afterwards, my computer told me that I had to restart it, which I did. I agreed to update it but it keeps popping up in the suggested updates and I've tried multiple times to do it. It never seems to work! 
    Please help.

    Here is a direct link to the F.36 BIOS which is the latest. Have you tried downloading it and manually launching it rather than using the HP Update utitlity?
    http://h10025.www1.hp.com/ewfrf/wc/softwareDownloa​dIndex?softwareitem=ob-135428-1&cc=us&dlc=en&lc=en​...
    Make sure you have a charged battery and AC plugged in. Let us know what happens. 
    You might also try going into the BIOS (F10) as you power up and check the existing BIOS version. You may already have F.36. 
    If this is "the Answer" please click "Accept as Solution" to help others find it. 

  • Disabling automatic bios update

    My hp pavilion dv7 is doing automatic bios update since I bought it 10 months ago.  I need stop this automatic update. Please i do not what a class of what is a bios I know it. I just need to stop the automatic bios update. I will really appreciate help on this issue.
    Thank You.

    Ed,
    I would not try to fool you - I don't have a reason to do so.
    HP no doubt knows the origins of all HP Updates.
    To put that in clearer, but poorly constructed English:  HP knows where their Updates come from.
    I do not work for HP and sometimes, in the effort to assist,  I make the mistake of using guess work when someone is only interested in true and specific answers.  My supposition is that the BIOS update originated from the HPSA or from HP Updates.  I could be wrong.
    I hope your current setup and solution work to keep the system stable.
    Thanks for using the HP Forum.
    Click the Kudos Star!
    It is a nice way to say “Thank You” for the help.
    Although I strive to reflect HP's best practices, I do not work for HP. 
    Kind Regards,
    Dragon-Fur

  • [BIOS Update Failure] HP ENVY TouchSmart 15-j021tx stuck at black screen on startup

    Hello
    So I decided to update the BIOS on my laptop because it was on the recommended list of driver updates. It started off smooth at first, but then the screen turned black and just stayed like that for like an hour. Having read from other posts that BIOS updates should take a minute if properly executed, in the fear that my update is not working properly I decided to shut it down. (I had to pull out the battery to shut it down because even the power off button was not working).
    But then when I switched it back on the screen remained black forever with the LED near capslock flashing twice. I tried pressing windows key and B key method but didn't make a difference, pulling out the battery and the AC power method didn't work also. I did refer to the HP help document that said "if your capslock LED is flashing twice, it means it is trying to recover the BIOS so just wait until it reboots itself properly". Well I have been waiting for 20 hours now and I am pretty sure this is not going to work out either.
    Any help on what I could do at the moment? I don't want to send it to HP to get repaired cuz that will take weeks while I need it working ASAP since my semester at uni has started already and I am an IT major!
    And shame on you HP...why recommend it to me when the update is not proven to be 100% safe....
    It is on Windows 8.1 64 bit,
    HP ENVY TouchSmart 15-j021tx Notebook PC

    Hi, I have the same issue, updated BIOS this morning and now have BLACK SCREEN
    Please get back to me ASAP as i rely on this lpatop for my work!
    Many thanks
    Lee

  • After BIOS update failure and rollback, audio hot keys detect press but do not function

    All other hot keys appear to function properly, only the mute/audio-/audio+ hot keys do not work.
    I can press the key and the vertical volume indicator displays but it does not move.
    At this time, I suspect this has to do with the failed BIOS update yesterday. All keys functioned properly before the failed BIOS update.
    All HP drivers and software are updated to latest.
    Another symptom I don't know may be related is that my bluetooth headphones have refused to connect once now without a full reboot. Bluetooth would connect and speaker audio audio would be muted, and sometimes "Manage Audio Devices" indicated connected to headphones but no headphone audo.  Will warrant further watching.
    The BIOS update was the most recent as of this writing and attenmpted to update only yesterday. I watched as the new BIOS progressed all the way to the point the BIOS attemnpted to flash and failed, then rolled back. I assume a backup was flashed because all my non-default BIOS settings had to be reset (non-UEFI boot, enable virtualization). 
    TIA,
    Tony
    BTW - I find it odd I can't just press a button to export/print my system configuration from the HP Support Assistant, I have to click every individual entry separately, but here goes...
    The current running BIOS is F.63
    The full results follows
    HP ENVY TS 17 Notebook PC
    5CG3331YPX
    E9G82UA#ABA
    Windows 8 64-bit 
    Intel(R) Core(TM) i7-4700MQ CPU @ 2.40GHz
    12GB
    4GB  Micron Technology 1600MHz
    8GB  Hynix 1600MHz
    Intel(R) HD Graphics 4600
    1920 x 1080
    60
    1965 KBC Version 93.51
    F.63
    IDT High Definition Audio CODEC
    Bluetooth Hands-free Audio

    Seems after another day,
    The problem resolved itself.
    No reboot, no significant changes to the machine I can think of since my original post.
    Just a spontaneous  self-fix.
    Thx,
    Tony

  • BIOS Update Failure Satellite L505D-S596​5

    I have a Satellite L505D-S5965 that was interrupted in the middle of a BIOS update. It turns on but doesn't display anything, the power and AC Adapter lights are solid and the fan is running. I tried plugging in an external monitor and using the Fn + F5 shortcut but that was unsuccessful. I was wondering which brand the BIOS was and whether they have a recovery tool? Any insight is awesome!
    Solved!
    Go to Solution.

    Reflash for INSYDE BIOS.
    Using a separate computer if necessary perform the following:
    1) Download your notebook model's BIOS "*.exe" file from the Support section. Mine was: slm0v150.exe
    2) Extract the files from the "*.exe" file.
    3) Locate the file that ends with ".fd", this is your actual BIOS file.
    *(for different brand BIOS's the file may have a different extension such as .rom or .bin)
    4) Rename your BIOS file to: "BIOS.fd" without the quotations.
    5) Format a USB Flash Drive to (FAT or FAT32) file system.
    6) Copy your newly named "BIOS.fd" file to the root directory of the Flash Drive. (Not inside any folders)
    On the corrupt computer perform the following:
    7) Remove the Battery, AC Adapter, and Hard Drive.
    8) Plug the Flash Drive with your "BIOS.fd" file on it into any USB port.
    9) While holding the Fn and F key on your keyboard:
    a) Plug the AC adapter into your computer.
    b) Hold the Power button until the computer turns on.
    c) Release the Power button and both keys once you hear the fan turn on.
    10) Observe your Flash Drive's LED's blinking, wait until your computer turns off and remove the Flash Drive.
    11) Replace Battery and Hard Drive.
    12) You're computer should be all set!

  • Satellite L675-S7020 BIOS Update Failure - Recovery

    Good afternoon everyone,
    I have a laptop that prompted me to perform a BIOS update on a L675-S7020 through the Toshiba service center.  I closed all of my programs and proceeded with the BIOS flash process.  Winplash got to about 80% then it froze and the laptop automatically restarted.
    You guessed it, the laptop will no longer boot.  I turn it on, the fan kicks on for a moment and then shuts off.  Looks like I have a bad BIOS flash.
    I've searched the forums and Google and I have tried several methods using the Crisis Recovery, renaming the bios rom to bios.fd, bios.wph, etc, and by pressing Fn + B.  It seems to read the flash drive and tries to flash but it never works.
    I was just curious if anyone else has ran into this with the L675 model and was able to perform a successful BIOS recovery?  I called Toshiba tech support and they were unable to help me.  Thanks!

    Good afternoon everyone,
    I have a laptop that prompted me to perform a BIOS update on a L675-S7020 through the Toshiba service center.  I closed all of my programs and proceeded with the BIOS flash process.  Winplash got to about 80% then it froze and the laptop automatically restarted.
    You guessed it, the laptop will no longer boot.  I turn it on, the fan kicks on for a moment and then shuts off.  Looks like I have a bad BIOS flash.
    I've searched the forums and Google and I have tried several methods using the Crisis Recovery, renaming the bios rom to bios.fd, bios.wph, etc, and by pressing Fn + B.  It seems to read the flash drive and tries to flash but it never works.
    I was just curious if anyone else has ran into this with the L675 model and was able to perform a successful BIOS recovery?  I called Toshiba tech support and they were unable to help me.  Thanks!

  • MOVED: Bios update Failure

    This topic has been moved to BIOS.
    https://forum-en.msi.com/index.php?topic=119766.0

    Try the method here, substituting your BIOS file in Step 1- of course:
    http://h30434.www3.hp.com/t5/Notebook-Hardware/DV4-1120us-bricked-by-HP-s-own-Bios-update/m-p/20598#...
    ******Clicking the Thumbs-Up button is a way to say -Thanks!.******
    **Click Accept as Solution on a Reply that solves your issue to help others**

  • Win 7 Pro 64bit - BIOS Update Failure 2ACN37WW

    G'day Genlemen,
    I am upgrading to 2g RAM and need to update my BIOS. However I am not able to get the program to run from Windows 7 Pro 64bit. I am trying to install 2ACN37WW.exe
    When I open the program as administator it pops up for a second and disappears, I've tried running it in compatibility mode which doesn't help.
    Do I need to be using a 32bit OS for the 2ACN37WW.exe to run in Windows? I have followed the txt instructions exactly.
    Is there another way I can update to 2ACN37WW outside of Windows? Like the Thinkpad T serious CD BIOS update method?
    IdeaPad S10-3 (064757M)
    S/N:xxxxxxxxxx 
    Thanks,
    Smack
    Edit by Mod Dont show your Serial in public to prevend your privacy

    Hi and welcome,
    there are a few methods you can use.. via bootable usb memory stick or card &
    http://www.nu2.nu/pebuilder/
    sincerely KalvinKlein
    Thinkies 2x X200s/X301 8GB 256GB SSD @ Win 7 64
    Ideas Centre A520 ,Yoga 2 256GB SSD,Yoga 2 tablet @ Win 8.1

  • BIOS update failure S55t A5237 -- how to recover?

    In the middle of a BIOS update, my S55t A5237 laptop shut down.  I was working on another computer at the time but I saw it happen. First the screen went dark, then the halo light around the power button went dark. Since then when you press the power button on the S55t the halo lights up but nothing else happens. I joined the forum and searched for similar cases. The only ones I find are 5 or more years old, and those solutions, promising as they are, depend on undocumented procedures that very likely are not identical for the S55t. Needless to say, I urgently need data from the Toshiba's hard drive. My kingdom for a horse, and so on.  Can anyone provide an up-to-date recovery procedure? Thanks in advance!  

    Unfortunately, it sounds like it would need to be professionally serviced. You could try removing the drive and connecting it to another computer to retrieve the data.

  • Bios update failure - bios image needed - lenovo S10-3

    hello!
    i`m in big trouble now   
    I just have reinstalled win7 and thought that i have to install the driver AND to do a bios update. I dont know why, but now my netbook can't start up (display is off, blackscreen).
    Now i read some threads how to recover the bios, BUT i dont have a bios image (oh god, i am so stupid...).
    Is there any possibility to solve this problem? Maybe by getting a bios image from a other S10-3 user?
    Btw, my lenovo has the Atom N550, 1GB DDR3 Ram.
    Please help me. I am thankful for any advice.

    hi sasa22
    you can download the bios file from the link below. after downloading, right click and select 'extract files' to get the files you need.
    http://consumersupport.lenovo.com/uk/en/DriversDownloads/drivers_show_2521.html
    hope this helps.

  • 890GXM-G65 BIOS update failure

    I just assembled a PC with the 890GXM-G65 motherboard, 4 GB Kingston DDR3-1333 memory (2x KVR1333D3N9/2G), Athlon II X2 245 processor, Nvidia 8500GT video card. BIOS revision was 1.6. Although I intended to do a clean Windows 7 x64 install later, initially and with only minor adjustments I was able to successfully boot from my HDD transplanted from my old PC with Windows 7 x86.
    I decided to update to BIOS 1.7 because I built this system in an emergency and on a tight budget, hence the Athlon II X2 and the reused old video card and HDD, but I intend to upgrade to a Phenom II X6 and a better card soon, and I remembered having seen the information on MSI's Web site, on the processor compatibility list, that revision 1.7 was required to support hexa-core processors. Later I found that the information on that page had been corrected to a mere version 1.2, but by then it was too late.
    I downloaded the ZIP file with the BIOS 1.7 update (7642v17.zip) from MSI's Web site and extracted it. I tried to run the executable (AFUD4310.EXE) from within a Windows 7 command prompt, but I saw a message that the program could not run in that OS. I tried to perform LiveUpdate from MSI's site, but apparently it wasn't compatible either (Windows 7 and IE 8), because nothing happened and it kept returning to the same screen, even though I had enabled all ActiveX options for MSI's site. Then I saved the BIOS binary (A7642AMS.170) to a FAT-formatted USB stick and tried M-Flash from BIOS.
    The BIOS recognized the file but said there was a "ROM dismatch" (sic). I canceled it, rebooted, re-downloaded the file, calculated the MD5 hash for the BIOS binary both on my HDD and on the USB stick and they matched, which rules out any problem with the file copy process or the USB stick hardware. I repeated the M-Flash process and since I had double-checked that the ROM file was correct, I saved my old BIOS to the same USB stick and let the flashing proceed.
    The BIOS flash process went normally through the end ("Erasing ROM," "Writing ROM," etc.), with the message that the PC would reboot after 5 seconds. Which, of course, it didn't. Other than the blue LEDs and the processor fan spinning, nothing happens. Not even the GPU fan spins, and the same video card still works perfectly in my old PC, which of course I had to re-assemble - I'm writing from it now and using the same video card. I tried everything, in desperation including resetting the BIOS jumpers and removing the battery, even though I knew that's for misconfigured BIOS parameters, not for a corrupted BIOS.
    Now, you don't have to tell me that a BIOS upgrade is risky. I know it, and only did it because I thought I had a good reason - to make my new PC ready for the upgrade I intend to do soon. But first, I wouldn't have done it without the incorrect information that was on MSI's Web site. Second, one expects a BIOS update to go without problems if you have the correct binary ROM file from the motherboard's manufacturer and there are no power outages or other problems that interrupt the process. Both these requisites were met. Yet now my brand-new mobo (which I stressed my limited budget to get exactly because of the X6 support and new 890GX chipset) appears to be dead.
    Do I have just an expensive paperweight and a considerable loss in my bank account, or is there still hope? Can anything still be done to save my motherboard? Thanks a lot for any possible help.

    Quote
    so there are all lies or what ?
    No, that is called marketing.  In most cases, there are no problems with M-Flash whatsoever.  However, in too many other instances there have been problems with M-Flash, that is why we warn against using it, to be on the safe side.  You can either ignore these warnings and take your chances (probably 95% success rate) or take them seriously and update the BIOS the DOS-Way and increase the success rate to 99.9999%.  It is up to you.  In case the only reason you posted your remark is to start the sort of discussion we already had hundred times in this forum, please either start your own topic and state your actual problem or just don't reply to my reply.  This is a user-to-user forum, not an MSI Technical Support or an official MSI Products complaint stations. If you think that there is serious lying involved here and if have justified complaints, please contact MSI directly:  >>How to contact MSI.<< Thank You.

  • BIOS update failure -- ThinkPad won't turn on

    Hello,
    I was foolishly inveigled into trying to update by BIOS, not understanding in any way the seriousness of such an operation. Well it failed, and now my PC will not boot. When I press the power button I hear the CPU churning and the battery light and the globe with a z light up. I bought my computer on Ebay with now warranty. What now?

    venkatlikhitb wrote:
    I have a 'ThinkPad R400' laptop. I had installed Windows 7(32-bit) version and updated the BIOS. It took quite a long time for installation and i cancelled it.A dialogue box containing the message saying the system cannot boot if cancelled. I clicked OK on the dialogue box by mistake. i then installed some essential software which required rebooting, then i resatrted the system. From then the screen remained blank, with a few beeps and onle the 'Z' symbol lit up.
    After an inquiry, i learnt that the BIOS update has failed.
    I need some desperately, my exams are coming up....can't study without my laptop. I feel very bad for it...
    If anyone knows a solution for this...do help me out!!!!
    The only way to fix a unit with a completely failed bios is to manually reprogram the bios chip. This requires special equipment as well as knowing exactly what to manually burn into the chip. My understanding is you can get it done for about $100 usd with the company recommended above by my friend lead.org. 
    The solution recommended by Lenovo is to replace the system board. My guess is they would charge you about $600 if pricing is similar to other models
    What you can do is see if you are able to boot from a usb floppy drive, or bootable usb stick. If you can, then look for phoenix bios rescue program. If your lucky and it works, it should get the machine to a bootable condition where you can then use a bootable cdrom disc to flash the correct bios, as this program will only install an extremely generic bios only designed to make the unit able to receive a proper bios update.
    However, if this works, then I'd run out and buy a lottery ticket, because you would be extremely lucky.
    ps. If you can get the unit to beep by abusing the keyboard (holding down  a dozen or more keys,  I'm not advising you smash the thing), then there is a chance it may be able to boot from a floppy or usb.
    ThinkPad W-510 i7-820QM(1.73-3.06GHz) Quad Core... ThinkPad T500, T9900, 8gb SSD...FrankNpad T-60p/61p (X9000 2.8ghz) 8gb SSD ips FlexView...ThinkPad T-61p (T9300 2.5ghz) 8gb ram...Thinkpad X-61 Tablet 4gb ram...ThinkPad A-31 (1.9ghz P4 1.5gb ram)

  • Ideapad S10-3 Model 0647 bios update failure, recovery possible?

    I have downloaded and installed the  latest bios version 37 (2acn37ww.exe).
    The flashing tool indicated success and has stored a backup of the old bios.
    But, after reboot the screen stays black.
    In this forum similar problems have been discussed, but none of the presented procedures did help.
    Has anyone successfully recovered the bios of an Ideapad S10-3 Model 0647?
    If there is a solution to the problem, please advice me.
    Greetings from Germany

    Hi and welcome,,
    did you upgrade memory ? If you did .. upgrade ... insert original memory .. try to start your s10-3 machine
    ..press F2 to access bios, then press F9 and load default settings in order to get machine works properly after new bios update.  Lenovo cannot guarantee compatibilty with all memory manufacturers and modules..
    ...shut down and re-insert mem upgrade ...try to start ...
    if you did no memory upgrade ...
    call your local service
    regards KalvinKlein
    Thinkies 2x X200s/X301 8GB 256GB SSD @ Win 7 64
    Ideas Centre A520 ,Yoga 2 256GB SSD,Yoga 2 tablet @ Win 8.1

  • T510 BIOS update failure

    Running Win7 32. I was applying the latest BIOS update today using the system update utility. The utility has gotten to 91% installed and hasn't gotten past that. The computer still functions normally, but I'm afraid that if I cancel the system update process that my BIOS will be fried.
    Any advice please? (Help!!)
    m
    Slide Rule>i1400>R40>R60>T510>T530

    Are you still in Windows and whilst running System Update has just stopped?  If so don't panic, it hasn't started updating BIOS.
    Or,
    are you seeing "deleting block x" or "writing "block x" and the BIOS update has frozen? Tricky one, what's the situation at the moment? (approx 4 hours later)
    Andy  ______________________________________
    Please remember to come back and mark the post that you feel solved your question as the solution, it earns the member + points
    Did you find a post helpfull? You can thank the member by clicking on the star to the left awarding them Kudos Please add your type, model number and OS to your signature, it helps to help you. Forum Search Option T430 2347-G7U W8 x64, Yoga 10 HD+, Tablet 1838-2BG, T61p 6460-67G W7 x64, T43p 2668-G2G XP, T23 2647-9LG XP, plus a few more. FYI Unsolicited Personal Messages will be ignored.
      Deutsche Community     Comunidad en Español    English Community Русскоязычное Сообщество
    PepperonI blog 

Maybe you are looking for