G45 gaming USB 3.0 ports make all USB's flicker and stop working

I just got my PC up and running but every time I install the USB 3.0 drivers my G510/naga go crazy and stop working. I've updated all drivers and I'm running ver 1.6 bios, Should I just RMA it back to newegg before my 30 days is up?

Its a z87 g45 and if I install the 3.0 intel drivers all other usb(plugged into the 2.0 back ports and 2.0/3.0 front ports) go crazy flickering and then they stop working if I uninstall the drivers they are all fine again.
razor and g510 are all up to date.
This is my first MSI product and it might be my last lol.

Similar Messages

I just made two separate copies on external hardrives of all my Lightroom 4 and 5 work. I also cleared ecerything in my recycle bin to make room on the hard drive. Now, when I go to work in Lightroom 5, I have no pictures. I did check the back-ups, and al

I just made two separate copies on external hardrives of all my Lightroom 4 and 5 work. I also cleared everything in my recycle bin to make room on the hard drive. Now, when I go to work in Lightroom 5, I have no pictures. I did check the back-ups, and all the pictures are there, however with a ? on every photo. What do I do to get my photos back into my original Lightroom 5 without the ? marks? Thanks in advance for any help. Al

Now, when I go to work in Lightroom 5, I have no pictures.
Could you provide more details? Is this the copy of your catalog, or the original catalog? Are you sure you didn't accidentally open some other catalog? If you try the catalogs under File->Open Recent, do you find your photos?
I did check the back-ups, and all the pictures are there, however with a ? on every photo. What do I do to get my photos back into my original Lightroom 5 without the ? marks?
Backups will work properly if you restore the catalog file and the photos to their ORIGINAL locations.

HT204074 I am using the same computer i used to make all my music downloads and when i try to re-download a song or album it already says "downloaded". i need to re-download because the backup was lost. my computer is still authorized on my account.

I am using the same computer i used to make all my music downloads and when i try to re-download a song or album it already says "downloaded". i need to re-download because the backup was lost. my computer is still authorized on my account.

If you still have the 'pointers' to them in the Music part of your iTunes library (i.e. where you would click on them to play them) then iTunes will assume that you still have them and will show them as downloaded in the Purchased link under Quick Links on the iTunes store home page - if you try deleting one of them then it should get the cloud symbol for re-downloading, and you can do the same for the others.

Windows 7 64 bit USB external hard drives lose its connection and stops working.

This is a very serious error for users of WIN 7 64 bit only.
I have read hundreds of posts about this problem an not a word about it from MS.
We have tested this problem on four different computers and three different external hard drives using Win 7 Ultimate.
Even tried the RTM version.
If you connect "Any brand" external USB hard drive to "Any brand of computer" using Win 7 (64 bit only) and try to copy a large file like a movie from the internal drive to the external USB drive it loses the connection to the USB.
We even reverted back to Vista 64 bit on two computers for testing but Vista 64 works fine.
This occurs on all computers with different USB drives.
We have tried all the suggestions posted and none work.
It seems from all the posts that other USB devices are also having similar problems with the 64 bit.
Below is a more about this problem.
http://windows7tipsonline.com/USB_Problem.htm
If anyone knows how to resolve this please post a reply here.
Thanks

The link only refers to USB problems with nVidia chips, so it's not a universal problem. I have Win 7 x64 RTM installed and I just transfered 2 4GB DVD files and 1 18GB backup file from my internal SATA drive to my external USB drive
with no problems - no time-out!
<text>Since nVidia chipsets seem to be the culprit, nVidia and the motherboard manufacturers need to be told about the problem so that nVidia can correct the problem and not
Microsoft. If it's a nVidia chipset driver/software problem,
Microsoft is not going to fix anything since it's not a universal problem.</text>
I think this answer is a smoke screen, here's why. The issue of a USB HDD losing its connection AND not being recognized on a booting Win 7 x64 in any of its incarnations is a Microsoft issue, not nVidia. I have three PCs (actually 4 but one is in storage so
doesn't count) to see firsthand what happens with this issue. One, is a maxed out Toshiba with Windows Pro x64. Every now and then, it asks to format any number of my USB drives. I have Seagates, Iomegas, Western Digitals, and an OLD Maxtor. The Toshiba OS
will from time to time claim the Iomega and WD drives need formatting or have a wrong parameter etc. It doesn't do this with the Seagates or Maxtor. does the Tosh have nVidia chipsets? Yes. OK, now I attach these dives to my Dell Inspiron run by Windows Vista
Home Basic and intel Graphic Chip. The HDDs fire up right away. OK, I stick them into the ASUS G75VW-RS72, a DTR notebook on Windows 7 Ultimate x64. The machine has nVidia chipsets. Sometimes the HDDs fire up right away (Maxtor is never a problem), sometimes
they don't. What do I do? Unplug, replug-sometimes works sometimes not. Turn off the computer, turn it back on-sometimes works sometimes not. Unplug and put into another USB port-sometimes works sometimes not. Unplug and leave unplugged for anywhere
from 10 seconds to half an hour-sometimes works sometimes not. Switched to different external enlosure or the same or different brand-sometimes works sometimes not. Remove the HDD and put into a NetStar portable dock with its own power supply(http://www.vantecusa.com/en/product/view_detail/295).
Result? The computers NEVER, not EVER, even ONCE demonstrated an issue with the drive. Other times, I remove the HDD and employ a converter (http://www.sabrent.com/category/hard-drive-enclosures/USB-DSC5/). Result? The computers NEVER, not EVER, even ONCE
demonstrated an issue with the drive. So I think the evidence suggests Windows is finicky and Microsoft is passing the buck on this.

4S w/8.1. All alerts, phone, message etc stopped working. Ckd settings can't find answer. Ckd sounds on settings all test good. Help.

4S w/8.1. All alerts, phone, message etc stopped working. Ckd settings can’t find answer. Ckd sounds on settings all test good. Help.

settings - do not disturb - off
use the side control and make sure the switch is up for ringer and not on vibrate.

I can't use the (sort by )feature, or open the emages to watch this item - I used to be able to do this with firefox and all of the sudden it stopped working

I tried to log in :
http://uae.dubizzle.com/motors/used-cars/land-rover/range-rover-sport/?price__gte=&price__lte=&year__gte=2006&year__lte=2009&kilometers__gte=&kilometers__lte=&seller_type=&keywords=&is_basic_search_widget=0&is_search=1&added__gte=&company_item_id=&auto_agent=
I can't use the
- (sort by )feature Lowest to highest for example ,
- or open the emages to watch this item
I used to be able to do this with firefox the old version and now all of the sudden it stopped working,
I tried to clear cash & coockies & un install and reinstall fire fox but nothing works.

You can try these steps in case of issues with web pages:
Reload web page(s) and bypass the cache to refresh possibly outdated or corrupted files.
*Hold down the Shift key and left-click the Reload button
*Press "Ctrl + F5" or press "Ctrl + Shift + R" (Windows,Linux)
*Press "Command + Shift + R" (Mac)
Clear the cache and cookies only from websites that cause problems.
"Clear the Cache":
*Firefox/Tools > Options > Advanced > Network > Cached Web Content: "Clear Now"
"Remove Cookies" from sites causing problems:
*Firefox/Tools > Options > Privacy > Cookies: "Show Cookies"
Start Firefox in <u>[[Safe Mode|Safe Mode]]</u> to check if one of the extensions (Firefox/Tools > Add-ons > Extensions) or if hardware acceleration is causing the problem (switch to the DEFAULT theme: Firefox/Tools > Add-ons > Appearance).
*Do NOT click the Reset button on the Safe Mode start window.
*https://support.mozilla.org/kb/Safe+Mode
*https://support.mozilla.org/kb/Troubleshooting+extensions+and+themes

TS1538 Ipod is stuck in recovery mode, and not recognized by iTunes. Tried all of the recommended resets and combinations mentioned, but the ipod is still not recognized. Genius said it may be a hardware error, but all of the buttons and cords work. Now

iPod is stuck in recovery mode, and not recognized by iTunes.
Tried all of the recommended resets and combinations mentioned, but the ipod is still not recognized. Genius at apple said it may be a hardware error, "The button is broke" but all of the buttons and cords work and i proved it to him. He then said he doesnt know, ma Now what?

If it does not work on other computers then I agree with the Genius

All of a sudden ALL of my Adobe programs stopped working, cannot open, uninstall or reinstall. DW, PS, PE etc. That has brought my productivity to a halt!

All of a sudden ALL of my Adobe programs stopped working, cannot open, uninstall or reinstall. DW, PS, PE etc. That has brought my productivity to a halt!

You mean Creative Suite 3?
Windows 7 (32-bit)?
Possibly Related Help Articles:
Error "Problems occurred during installation" | CS3
Error "Licensing has stopped working" | Windows
Nancy O.

Licensing has stopped working - I tried all the published options and none work. Acrobat 9 Pro Mac Air 10.9.5

Licensing has stopped working - I tried all the published options and none work. Acrobat 9 Pro Mac Air 10.9.5
Thank you for your help

Hey,
Considering error "licensing has stopped working", you might need to try out the solutions mentioned in the following KB doc link:
Error "Licensing has stopped working" | Mac OS
Let me know if this helps.
Regards,
Anubha

TS4268 I still have "Waiting for Activation" while trying to activate iMessage on the iphone, noting that it was working normally and stopped working suddenly, as well I had done all the mentioned steps.. what should I do else?

I still have "Waiting for Activation" while trying to activate iMessage on the iphone, noting that it was working normally and stopped working suddenly, as well I had done all the mentioned steps.. what should I do else?

Define "mentioned steps."
See this:
iOS: Troubleshooting FaceTime and iMessage activation

Is it a common occurance for an iPad 4th gen to just blank out and stop working? The screen shows nothing at all, no sounds but it registers on my computer when connected.

Is it a common occurance for an iPad 4th gen to just blank out and stop working? The screen shows nothing at all, no sounds but it registers on my computer when connected.

A reset may help. Tap and hold the Home button and the On/Off buttons for approximately 10-15 seconds, until the Apple logo reappears. When the logo appears, release both buttons.
No content is affected by this procedure.

Usb flash drive v240w stopped working

Hi....... i have a hp usb flash drive v240w that had stopped working..????
tell me what i can do to make it work again... or what i have to do for replacing it..

johnl927 wrote:
If it was mounted to a system and not ejected correctly you might have messed up the boot record and mount point, if you can see it Disk Utility then the mount point of that drive is bad, you have to reformat it.
Mr H might have ejected it incorrectly (without doing the command E thing) but really I doubt it.
Not quite sure what you are saying here: since we DO see it in DU (where it says not mounted) then there is no way even to look at what is on the drive (the number of files and used space shows up in DU as well) and all I can do is reformat it?
I attached a good, working flash drive and it too shows up in DU, but it indicates where it is mounted (volumes/... if I recall) so I don't get what you say above where I underlined it.
Originally drive was formatted as MBR I suspect, being Sandisk.
I've never bothered to reformat the flash drives from their original formatting in the past - I use several and never have I had this problem.
As long as I have to now, what format do you suggest?
Thanks,
Mrs H

A thousand USB questions .. later why do USB devices not mount/stop working

I know this is loaded post but I'm getting really torqued at the USB sub-system in OS X.
I bought a mini ~2 years to see what the OSX scene was like, so far it's mostly been a great OS but the USB problems past at work, on my home system only cropped up in the past few months is very frustrating. :-P
I've done the googling, apples pathetic troubleshooting pages, run the Profiler and USB Prober trying to determine all with no luck.
Can any of you help me "get it"?
At work, we had a OSX server a few years that failed to stop mounting a USB drive that had been used several time before. It was under support and Apple failed to resolve the problem!!
I had a Transcend usb enclosure that worked in 10.3 and by the time 10.4 rolled around it stopped working (checked on a few different macs)
Now I have a iogear gfr280 memory card reader/writer that worked three months ago and just tried to use it the other day ... borked!!. I then take it to work plug it into my co-workers iMac running 10.5, mounts up and I can copy my photos off the SD card, no issues. WTH!?
Also, just the other day my digital camera powershot A630 batteries ran out right as I was importing... Took me three hours of reboots, plugging in my thumb drive and camera only to have them show up for a split second then disappear from iphoto or the desktop.
I even thought of calling Apple on this one but I'm leary based on prior experience with the server incident.
This is even worse than under Linux(run that too), most times the kernel either supports the device or it doesn't ( I can live with that! ). None of this .. I'm gonna work and then all the sudden stop one day.
Anyone? Would it be worth paying for a one-time support call?

Try things in this USB faq.
DALE

X230, All touch/pen input functions stop working intermittently

Hello,
Ever since I got my x230 tablet (used), the pen/touch input intermittently stops working. It never happens when I'm using it, but when I either power down the tablet or resume from sleep, the touch and the pen will not function. The rotate button also doesn't work when the issue occurs, but the power button on the screen still functions. The fingerprint reader always works.
Once it stops working, there's no way for me to get the touch/pen input back. If I reboot, usually it remains not working. Pulling the battery out and waiting doesn't have any effect either; when I turn it back on it still doesn't work. The only thing that works is to wait...sometimes a day, sometimes an hour, and eventually the touch/pen starts working again after a reboot (or resume from standby).
I thought it might be a driver issue, but the issue is independent of operating system. When it works, it works in Windows 7, 8.1 and Linux Mint. When it doesn't work, it doesn't work across all three.
I've read of others having similiar issues, but every other occurence that I saw was fixed by a reboot...my problem isn't consistently.
Any help would be appreciated, as I love this machine when it works, but it's really useless when it doesn't (as I have another Lenovo laptop that has better specs than the tablet)
Kyle
Solved!
Go to Solution.

I have a bit more information which really makes the problem seem odd. There seem to be a few more things that stop functioning along with pen/touch. Here is a list of what functions and what doesn't when the issue arises.
Not working:
- All pen/touch input
- Screen rotate button
- "circular arrow" button beside screen rotate
- the sensor that senses the closing of the lid (the display stays lit when lid is closed and doesn't sleep automatically)
- rear-facing (battery and sleep) LEDs.
- front-facing WIFI LED
Things that continue to function:
- The display itself
- fingerprint reader
- webcam, microphone and speakers
- on-display power button
- front-facing HDD access light
The last two are very peculiar since they are on the same physical board as the two non-functioning buttons and the rear and WIFI LEDS which don't work. I have no idea what is wrong. It can't be a connection issue as starting and stopping of the problem coincides with power-ons/offs.
Please help me!

Toshiba All-in-One DX1210 - remote stopped working

Hi,
I have a DX1210 (PQQ09A-02900G), and I have an issue where the remote works fine when I start the machine for about 15-20 mins, then it just stops working.
There are no errors and can't find anything in the event logs.
Only way to get it to work again is reboot or put it to sleep and wake it up again.
Still only lasts another 15 mins or so again.
Anyone come across this before? Running Win7 64bit.
Cheers,
Nathan

Hi
Did you check if driver reinstallation/update would fix this issue?
I think you should check this
There is an driver called Winbond CIR Driver
http://www.mytoshiba.com.au/support/computers/all-in-one/dx1210/pqq09a-02900g/download?os=25
You should uninstall this firstly and after new reboot, install this package again.

G45 gaming USB 3.0 ports make all USB's flicker and stop working

Similar Messages

Maybe you are looking for