G460 and Windows 7 problems (Failed updates, LAN Adapter sometimes fails, etc...)

Hello everbody! I am having problems with Windows 7, well, I Have a original Windows 7 64-bit Retail CD copy and reinstalled on my G460 (The Original Windows OEM version comes with a lot of unecessary software and others stuffs =/), I've formatted and reinstalled, everything gone fine.
At the first initialization I've noticed LAN adapter was recognized, ok, I've set up IP address and configured Windows Update, it's been found 77 updates (optional updates included), but by default, only 67 updates selected, I let default updates selected and chose to download and install, but after that, only 10 or 13 updates was correctly installed, the others just failed! After reboot, the failed updates appeared to be reinstalled, ok, I chose to reinstall, but at this time, only 20 or 25 updates were correctly installed from the total failed updates, I thought to myself that some updates depends from another to be installed, ok, after three reboots, I've got all updates installed, well, at least that's what the system says, but when I look up at the Update History, I see many updates marked as FAILED, others are marked as sucefully installed, but the marjority are marked as failed! I don't know why it occurs, I've tried to install Windows 7 Service Pack 1 and it simply fails too. =/
Another problem too is the LAN Adapter, sometimes when Windows starts, the adapter doesn't work and when I check the Hardware manager, there is a yellow icon on the adapter and it says that the hardware couldn't initialize.
Anyone with the same problems?

Duck,
I am testing now after a clean Windows installation, before I update, I set to off the windows firewall and also lower my router's firewall, I also deselected the LAN Driver Updated, let's see if the problem occurs...
Hum, about the SP1, like you said, the video card (In my case, Intel HD Graphics) I've tried to download from Intel's site (Driver version: 15.21.10.64.2291): http://downloadcenter.intel.com/SearchResult.aspx?lang=eng&ProductFamily=Graphics&ProductLine=Laptop..., but when I try to install, it says that is not the correct driver for the video card, just at the Lenovo's site works correctly (Driver Version: 8.15.10.2104): http://consumersupport.lenovo.com/ot/en/driversdownloads/APR_Driver_List.aspx?CategoryID=880973&OS=W...
Anyone has experienced this problem?
Thanks!

Similar Messages

A720 and windows 8 problems

Im trying to setup the a720 with windows 8 and have this problems: When power off the computer have all time this BSOD : SESSION_HAS_VALID_POOL_ON_EXIT Touchscreen not work.
If I run the windows 8 install, just for test, the touch is working, the problem is after install.
External hard disk not working when connect to any USB port, and unplug result in a system freeze.
Here my mini dump for error SESSION_HAS_VALID_POOL_ON_EXIT, I have the i5 model too and this not happen on that model:
Crash Dump Analysis provided by OSR Open Systems Resources, Inc. (http://www.osr.com) Online Crash Dump Analysis Service See http://www.osronline.com for more information Windows 8 Kernel Version 9200 MP (8 procs) Free x64 Product: WinNt, suite: TerminalServer SingleUserTS Built by: 9200.16384.amd64fre.win8_rtm.120725-1247 Machine Name: Kernel base = 0xfffff800`60081000 PsLoadedModuleList = 0xfffff800`6034ba60 Debug session time: Wed Nov 28 17:08:03.203 2012 (UTC - 5:00) System Uptime: 0 days 0:00:13.897 ******************************************************************************* * * * Bugcheck Analysis * * * *******************************************************************************
SESSION_HAS_VALID_POOL_ON_EXIT (ab) Caused by a session driver not freeing its pool allocations prior to a session unload. This indicates a bug in win32k.sys, atmfd.dll, rdpdd.dll or a video driver. Arguments: Arg1: 0000000000000001, session ID Arg2: 00000000000000f0, number of paged pool bytes that are leaking Arg3: 0000000000000000, number of nonpaged pool bytes that are leaking Arg4: 0000000000000001, total number of paged and nonpaged allocations that are leaking. nonpaged allocations are in the upper half of this word, paged allocations are in the lower half of this word.
Debugging Details: ------------------
TRIAGER: Could not open triage file : e:\dump_analysis\program\triage\modclass.ini, error 2
CUSTOMER_CRASH_COUNT: 1
DEFAULT_BUCKET_ID: WIN8_DRIVER_FAULT
BUGCHECK_STR: 0xAB
PROCESS_NAME: csrss.exe
CURRENT_IRQL: 0
LAST_CONTROL_TRANSFER: from fffff80060680506 to fffff800600fc040
STACK_TEXT: fffff880`05d059b8 fffff800`60680506 : 00000000`000000ab 00000000`00000001 00000000`000000f0 00000000`00000000 : nt!KeBugCheckEx fffff880`05d059c0 fffff800`603e8bb5 : fffff880`04983b40 00000000`00000000 fffff880`04983000 ffffffff`ffffffe6 : nt! ?? ::NNGAKEGL::`string'+0x36216 fffff880`05d05a10 fffff800`604a48b6 : 00000000`00000372 fffff880`04983000 fffffa80`090203c0 fffffa80`08fc4540 : nt!MiDereferenceSessionFinal+0xf1 fffff880`05d05a80 fffff800`604abe68 : fffff8a0`00142b00 00000000`00000000 00000000`00000001 00000000`00000001 : nt!MmCleanProcessAddressSpace+0x2be fffff880`05d05af0 fffff800`604ac55e : fffffa80`00000000 00000002`00000001 00000000`00000000 fffff8a0`00d0b8f0 : nt!PspExitThread+0x668 fffff880`05d05c10 fffff800`600e1dd6 : fffff800`60377180 00000000`00000080 fffffa80`090203c0 fffffa80`08fc4540 : nt!PspTerminateThreadByPointer+0x4e fffff880`05d05c60 00000000`00000000 : 00000000`00000000 00000000`00000000 00000000`00000000 00000000`00000000 : nt!KiStartSystemThread+0x16
STACK_COMMAND: kb
FOLLOWUP_IP: nt! ?? ::NNGAKEGL::`string'+36216 fffff800`60680506 cc int 3
SYMBOL_STACK_INDEX: 1
SYMBOL_NAME: nt! ?? ::NNGAKEGL::`string'+36216
FOLLOWUP_NAME: MachineOwner
MODULE_NAME: nt
IMAGE_NAME: ntkrnlmp.exe
DEBUG_FLR_IMAGE_TIMESTAMP: 5010ac4b
FAILURE_BUCKET_ID: X64_0xAB_nt!_??_::NNGAKEGL::_string_+36216
BUCKET_ID: X64_0xAB_nt!_??_::NNGAKEGL::_string_+36216
Followup: MachineOwner ---------

Ok, the problem is generated by NVIDIA VIDEO DRIVER!
Honesty I cant understand why LENOVO not choose for this machines a ivibridge CPU with HD4000 VIDEO, performance is similar, and Intel VIDEOS GPU, have 0 troubles, ATI AND NVIDIA always are very problematic.
Anyway the solution is simple:
1 Turn OFF windows update, or change to selective install.
This prevent win update install NVIDIA driver in automatic way.
2 Uninstall NVIDIA driver sand NVIDIA related stuff.
3 Restart the machine, NOT POWER OFF, just restart.
4 Now go to SYSTEM PROPERTIES > HARDWARE > DEVICE MANAGER
INSIDE DISPLAY ADPATER NOW SELECT DISABLE THE DEFAULT VGA DRIVER, NOR UNINSTALL CHOOSE DISABLE!
NOW RESTART.
After restart now touchscreen work correctly, and next time you power off the machine, not have that ugly error all time.
This not is a final solution is just a workaround until LENOVO/NVIDIA provide a final fix for this.

Dreamweaver and Windows Vista Problem

Hello,
I ran into a problem with my Dreamweaver - 8 application and
cannot find a fix. I open up the Dreamweaver application, 2-3
seconds later, I get the following error message, “A problem
caused the program to stop working correctly, windows will close
the program and notify you if a solution is available.” I am
using Windows Vista and believe the problem is associated with the
Vista operating system. I am puzzled by the fact that I have been
using Dreamweaver with Vista and have had no problems up until now.
I uninstalled & reinstalled Dreamweaver to no avail. I
restored my computer to an earlier date, and updated Dreamweaver,
and still have the same problem.
Any help to resolve this problem would be greatly
appreciated.
Steve
Text
Text

Hello Again,
I finally fixed the problem. I went into my network settings
and reset my network address. This did the trick, I went back and
opened up Dreamweaver without any problem.
Steve

ITunes and Windows Vista problem

I have Windows Vista and ran iTunes successfully for 8mos. Now I'm getting a message box that says "iTunes has stopped working. Close box and Windows will send a solution." The solution, upgrading Windows, doesn't work. Is Vista the problem?

Scan and Fix windows System files:
Can you go to command prompt (START/ALL PROGRAMS/ACCESSORIES right mouse click "command prompt" and choose "Run as Administrator"
type in
sfc /scannow
let Windows fix any system files that need to be repaired.
Restart the computer if it did actually repair or update files.
Start iTunes again

T430u and Windows 8 Problems

Hi everyone,
Really need some helps here. I bought a T430u , and to be honest, i'm rather dissapointed with this. My keyboard was dead in a matter of weeks, so i've just get it back from the sevice centre. And now I have another problems:
1.Cannot wake up from sleep
I've read on another sites that I have to disable expresscache and quick start, but then it'll make the ssd caching useless isn't it? And yet after I uninstall expresscache and disabled quick start, it still doesn't solve my problem. Now it'll wake from sleep but will crash and restart.
2.Glitchy trackpad
On some occassion, the trackpad just stop working for 1 - 5 minutes. And then it'll work again. Now I mainly use mouse, but seriously...
I've upgraded all the lenovo driver and windows update too. But it doesn't solve anything...

Hi centraldogma,
Welcome to Lenovo Community. I'm assuming that the system is still under warranty. I would suggest calling Tech Support to see if they can help you troubleshoot the problems. If that doesn't help perhaps they can advise about the last option of returning the system.
ThinkPad: T530 / X1 Gen 2 / Helix - Yoga: Tablet 2 Pro (Win) / Yoga 3 Pro
If you find a post helpful and it answers your question, please click the "Accept As Solution" button.
Lenovo Advocate ~ I am not employed by Lenovo or Microsoft. I am a volunteer.
Microsoft MVP - Consumer Security
SpywareHammer

[SOLVED] Dual boot with Windows 8, problems after updating Windows

Hi all,
I have been maintaining a dual boot of arch and Windows 8 for some time. I recently updated Windows to 8.1, and found that the update process had two side effects:
1) The update added a new partition in the middle of my file table, so my /etc/fstab which referenced "/dev/sda6" was wrong because that partition is now "/dev/sda7."
2) The default boot device was switched to the Windows Boot Loader instead of grub. But, this is not a problem because I can work around this by using the "Choose boot device" feature of my bios at start up.
So, neither of these problems are critical for me at the moment. I can fix my fstab and just press a hotkey at startup.
EDIT: I have avoided the /etc/fstab issue by referencing my partitions using UUID as specified in https://wiki.archlinux.org/index.php/Fstab.
How do I set the default boot device back to grub? There is some weirdness here, I think windows is using UEFI booting and my grub uses the old booting system.
Last edited by bjmnbraun (2014-05-14 19:00:36)

Rex: I tried that command, got some warning messages regarding blocklists, but no dice.
Loqs: You are right about windows using a ESP and UEFI while my linux is not booting using UEFI. My bios is configured to try "Legacy boot" first before trying UEFI. Getting linux to boot using UEFI seemed like a pain, so...
I went into my BIOS settings and found that the Windows Boot Manager boot device was listed in front of my hard disk (which boots linux). I don't think this used to be the case, so something about the update caused my BIOS to reorder the boot devices (probably because the partitions changed).
Switching my hard disk to be above the Windows Boot Manager in the boot device list now makes me boot into linux by default, and I can boot into windows by pressing a hotkey at bootup and selecting the windows boot manager.

SB X-Fi Xtremegamer Fatal1ty Pro and Windows 7 problem

6SB X-Fi Xtremegamer Fatalty Pro and Windows 7 problem7Hi,
I have SB X-Fi Xtremegamer Fatalty Pro? sound card on my pc and after updating on windows 7 Unltimate my card doesnt work... i tryed every posible driver according this issue and nothing happens.. i got 2 errors .) on Volume panel i have this messege " There are no supported audio device available. You need to close the application. Click OK to close the applcation now. " and on Computer manangement an error on Creative X-Fi audio Processor (WDM),?
I check the drivers and is SB0460?. on the site it say Xtreme music but the code is the same with my card.. i used this drivers and nothing. i also used auto update and nothing again..
Please any help because i dont know what to do any more..
My best regards

Did you try using an independent driver such as robertmc8's PAX driver or Daniel K.'s drivers? I have an old PCI-based Xtremegamer Fatalty Pro with Windows 7 64 bit and I am using PAX drivers. No problems here.

Icloud and Windows 7 - unable to update the favorites icloud"

Icloud and Windows 7
Icloud Message:
"unable to update the favorite icloud"
Thank you for your help.

Many of us had the same problem. If you scroll thru the questions, you'll see your same question/problems dating back over a month ago when the new update first came out. The Apple Software Updater just showed blank, it didn't show the update. I patiently waited, knew it wasn't my computer since scores of us were having same problem not being able to do the update. Knew eventually Apple would fix it. Lo & behold when I signed on to my computer today a window popped up from Apple Software telling me updates were available & I clicked the "download" and it downloaded just great. I was able to sync my Ipod and Ipad to it just fine, etc. So probably if you can just wait...is your current ITunes working? If so, wait. Looks like there is a fix coming to all of us.(Note, that the "update" pop up window was different than the little window you've probably been seeing on your ITunes screen. This one didn't come up when I opened up ITunes. It popped up on my desktop. I have Win 7. Good Luck.

Boot Camp and Windows 7 Problems

I have found a reproducible bug with Boot Camp and WIndows 7.
Clean install of OS X 10.6.2, Boot Camp Asst. Partition on my Mac Pro boot drive, clean install Win 7.
Problem: while in OS X, Disk Util Repair Permissions takes forever, churning away at the hard drive. Also, intermittent Spotlight hangs, and weird Dropbox behavior where it churns the disk like crazy again.
I have Paragon NTFS for Mac v 7.03 and perhaps this has something to do with it.
After retuning to a single partition using Boot Camp Asst. (deleting the Win 7 partition), all is back to normal - Repair Permissions takes about 60 seconds, no Spotlight or Dropbox issues whatsoever.
Using Fusion for Win 7 for now. Awaiting official Apple support of Win 7 in Boot Camp.
Wondering if anyone else can confirm this behavior where you have a partitioned boot drive with 10.6.2 and Win 7, with or without NTFS for Mac 7.03.

Addendum: on reboot/option key boot screen, it showed OS X volume, Win 7 Volume, and EFI Boot Volume - the latter had never been there before with Vista.

Iphone 5 and windows 8 problems

I am having syncing problems with my iphone 5 and windows 8.

whats your exact setup as in how do you do it?
what do you do?
what result do you expect?
what result do you receive ?
how does what you receive differ from your expectation?

Adobe Acrobat 5.0 and Windows 7 Problem

How do I get Adobe Acrobat 5.0 and Windows 7 compatible so I can access my attachments to e-mails sent to me?

I was successful in installing AA5 in Win7 Starter as a test. It works except that I changed the printer port to file (AcroTray or the Distiller Assistant of AA5 does not work in Win7). You can open the files that are created in Distiller to create PDFs. You may be able to use watched folders to automate the process to some degree.
I suspect that your question is more of having problems reading PDF files in AA5. That is a different issue. It is not a Win7 compatibility issue, but one of needing a newer PDF viewer. I have AA5 on one XP machine that I use Reader X on for seeing the newer files. I do have to deal with some conflicts between AA5 and ARX, but I can deal with that (many folks lose there minds on that).
There is one other option that might be a major problem. Many folks are getting Win7 on 64-bit machines. In that case, you will have to be sure AA5 runs in 32-bit compatibility.
At least that should give you some ideas of what might work. If a 64-bit machine, you may definitely have a problem -- I never tested that combination.

WIndows 7 and Windows 2008 authentication failed in Windows 2003 Domain

Hi,
We have Domain with Windows 2003 and recently Windows 2008 Doamin controllers also added.
We are facing authentication failure for Windows 7 and Windows 2008 Domain members when user is trying to login.
Schema Master is on Windows 2003 and remaining roles on Windows 2008 Domain controller.
Windows XP clients login is working fine.
Problem si for Windows 7 and Windows 2008 Domain members login.
Any hint/solution will be really great help.
Pls share if you have any solutions.
Regards:Mahesh

Hi,
I found some more details about issue
Below are the events getting generated. It looks like due to encryption mismatch with Windows 2003 Domain and Windows7 and Windows 2008 clients. However i am looking for solution if someone tested this case.
Event Type:        Error
Event Source:    KDC
Event Category:                None
Event ID:              26
Date:                     08/06/2014
Time:                     9:41:04 AM
User:                     N/A
Computer:          AAAAAA
Description:
While processing an AS request for target service krbtgt, the account ADDADA$ did not have a suitable key for generating a Kerberos ticket (the missing key has an ID of 2). The requested etypes were 17. The accounts
available etypes were 23 -133 -128 3 -140.
For more information, see Help and Support Center at
http://go.microsoft.com/fwlink/events.asp.
Event Type:        Error
Event Source:    Kerberos
Event Category:                None
Event ID:              4
Date:                     08/06/2014
Time:                     9:34:17 AM
User:                     N/A
Computer:          AAAAAA
Description:
The kerberos client received a KRB_AP_ERR_MODIFIED error from the server ADADDFHDHDH$. The target name used was . This indicates that the password used to encrypt the kerberos service ticket is different than that on the
target server. Commonly, this is due to identically named machine accounts in the target realm (DOMAINNAME.COM), and the client realm.   Please contact your system administrator.
For more information, see Help and Support Center at
http://go.microsoft.com/fwlink/events.asp.
Regards:Mahesh

Primairy IDE and Windows Install Problems!

Hail all, I have had this issue the last 48 hours for the most part, but it started last monday night..
I orderd all my stuff from newegg.. I got:
Intel 775 Socket 2.8ghz Prescott
ECS Mobo (psh model)
2x 512mb DDR 3200
Western Digital 80gb Hard Drive at 7.2k RPM (my only OEM item)
Chaintech GeForce 6600 GT video card
Jaht ( I think? :p ) Wireless PCI Adapter (can't have wires running in my room)
Aspire-X Dreamer II Case
Rosewell DVD/CD-RW combo (very cheap).
Anyways, I hooked it all in and it wouldn't give a signal to my monitor. I found out a small mount was hitting the mobo, and it was probably damaged. I got a new motherboard on Friday (which was all of my paycheck being as young as I am), the grand MSI 915P Combo. Oh, it was so shiny and awesome!
I got a signal to the monitor, and it started up. I put in a floppy for the latest BIOs and it seemed to go right. I put in my WinXP disk, and rebooted. Do do do, it starts to do that 'pre-'load Windows thing. When the little message at the bottom says "Loading Windows Setup". I am thinking "so leet ".
When, HELLO, my first Blue Screen of Death (before I even installed Windows! I love that). It says check for Virusis (I havn't been on the internet..) and uninstall any new HDs and such. Well, that confuses me. So.. I put in my friend's very very old HD (which has tons of buggies in it BTW) and that loads fine. So I put mine back in, skim through my BIOs and I notice that the HD is the Third Master IDE, and that my CD-ROM slot is considered RAID.
What the hell?
I am going to install the older set of BIOs for the 915P Combo from July instead of the September ones and hopefully that'll fix it.
Has anyone else had any errors like this? Thanks - Erik

you skiped the part about him buying the msi board.
Anyways, I hooked it all in and it wouldn't give a signal to my monitor. I found out a small mount was hitting the mobo, and it was probably damaged. I got a new motherboard on Friday (which was all of my paycheck being as young as I am), the grand MSI 915P Combo. Oh, it was so shiny and awesome
try switching the jumper on the hard drive make sure its set to master it could be on slave and casuign some problem. I know for some odd reason when my 1 of my drives is in a differt location i cant boot windows i move it back and its good.

Audigy 2 ZS Platinum and Windows 7 problems

Hi there,
Recently upgraded to a new PC and Windows 7, and am gutted that the audio/interface card no longer seems to work. I mean, it works for simple listening duties, but the Line In/Mic, "What You Hear" etc., are all registered as "currently unavailable". I home record a radio show, so I'm in a panic to get the card working properly. I'd have to downgrade to XP.
The current drivers available are listed as working for Windows 7 on the Creative site, not sure they should be up when they don't.
Any sign of a resolution for this, or ideas what I could do?

/ Came up with something of a partial fix for this.
Right click the driver installation file, go to properties, find the compatibility bit and change it to XP, then install.
Most things stayed not working, but the one I really need "Line in 2/Mic 2" now works, thankfully.
Be nice to get all the functionality back though!

HT6114 Is anyone else having problems with connecting to projectors on the OS X and windows partitions after this update?

I am using the thunderbolt port with an adapter for hdmi connecting to a 42" RCA tv from my mid 2012 MacBook Pro 15". I have confirmed that the adapter and the hdmi cable are perfectly fine. I can only connect to a projector on the OS X 10.92 if I keep the displays separate. As soon as I try to use the mirror feature I lose the visual feed. Sound will still go through however.
On my Windows 7 partition the OS can't even detect it is connected to an external display.

Hi there Chinsteig,
You may find the troubleshooting steps in the article below helpful.
Apple computers: Troubleshooting issues with video on internal or external displays
http://support.apple.com/kb/ht1573
-Griff W.

G460 and Windows 7 problems (Failed updates, LAN Adapter sometimes fails, etc...)

Similar Messages

Maybe you are looking for