G4MX420 not work with motherboard?

I can not seem to get the vga card to work. windows will load but the card, moniter will just switrch off. I think that it might have something to do with my motherboard. I am running an epox 8kha. if any one has any ideas on what i could try i would greatly appreciate it.

hi
try asking here as welllink

Similar Messages

Window 10 build 10041 does not work with Intel 82579V Gigabit Ethernet on ASUS motherboard

I originally posted this question here:
answers.microsoft.com/en-us/insider/forum/insider_wintp-insider_update/window-10-build-10041-does-not-work-with-intel/6729892f-83aa-4822-b20a-ea84f4fd06c7
and was asked to post it on this forum...
I updated a computer I have which is a quad core i7 that I built and includes an ASUS motherboard with Intel 82579V Gigabit Ethernet built in. Windows 10 preview 9926 worked fine with this network adapter. Window 10 build 10041 does not, and I have tried
it twice so far. I even went as far as buying a Thunderbolt-Gigabit Ethernet Adapter (Broadcom, sold by Apple)... and while it installed the driver automatically, it did not work either. Each time you try to view the properties of either of them, it locks
up or give an error. In fact, doing much of anything with the Intel adapter icon assures you of not being able to do a clean reboot... have to kill power. I have finally gone back the previous version 9926, which has its issues but no where near as bad
as not having any network connectivity! Does anyone have this issue and a workaround?
Note, there are two images on the windows 10 preview forum that I posted this question on. I could not post the full link as I was getting a message here that links and graphics are not allowed.

Thanks Roger, I posted the following yesterday in the other thread (thinking it was this thread - confusing after they moved it here)... It may be that the new driver fixes the issue that 10041 has with it, but I have not tried that yet. If I do I will update
this... Thanks!
I have more information about this, which basically exonerates any issue with the Intel 82579V Gigabit Ethernet hardware or software. I have 3 computers with Windows 10 preview so I have multiple angles to see issues from. With this I have found a culprit
(but I suspect not just the only culprit) in this above mentioned problem...
10041 build combined with installing (or attempting to install) CISCO VPN Windows 7 64bit 5.0.07.0440-k9 client causes the issue mentioned above. I confirmed this on a completely different machine with a totally different Ethernet adapter. First machine
is an ASUS motherboard in a tower system I built, with the Intel 82579V Gigabit Ethernet hardware built in. Second machine is a Gateway Laptop from 2008 which has a Marvell Yukon 88E8057 PCI-E Gigabit adapter built in. Build 10041 will work fine with my 2008
laptop, including the MS VPN client (which I have tested). However, if you attempt to install or even uninstall the Cisco client you will have to do a recovery to a restore point (as I have done twice) in order to get your network working again. Installing
or attempting to install (because it never even does install properly and times out), CISCO VPN client will render your entire network unusable. Going back to a restore point saved me and I am still running 10041 but I can't use CISCO VPN client any longer.
I could with build 9926, including on all 3 machines. I now have 9926 on two machines and 10041 on only the 2008 laptop.
Hopefully this above information helps someone resolve the issue. I will also mention, even though my network is working on the 2008 laptop, I still can't go into the Control Panel\Network and Internet\Network Connections and right mouse click on the Marvell
Yukon 88E8057 PCI-E Gigabit adapter icon. I get an error when clicking on Properties menu popup : "An unexpected error has occurred". So something is still up with my network adapter driver or windows software, but it could be a side effect of all
that has happened with the Cisco software install attempts under 10041.
Another note: CISCO Anyconnect also has the issue.

T40 sound not working after motherboard replaced....bad sound card?

Hello,
I recently brought back to life my old t40 2373-75U by switching out the motherboard (it would no longer charge batteries) with a used R51 1830 motherboard (which I believe was a recommended upgrade by someone on this site).
Anyways, long story short - I have the gently used motherboard now installed and the machine is up and running with my old T40 hard drive. I also have XP-SP3 installed on it, and just had to make a few minor driver updates...everything seems to be working great, EXCEPT I have no sound.
I have tried everything I can think of:
Software:
-un-installing and re-installing the audio driver several times
-installing the 2004 version of the hotkey driver (the 2013 version did not work with my system) because the Access IBM and volume buttons were not working and I thought that might be the culprit
-I believe I updated the BIOS drivers, but not sure if I "flashed" it...admittedly, I don't even know how to do that.
Hardware:
-the hardware in device manager shows that it's working properly
-I've performed the "test hardware" function through the control panel/device manager and it shows a signal with my USB "test" microphone going in and a signal coming out, but still no sound is actually coming out
-lastly, I've tried connecting external speakers to the headphones jack and still nothing..
At this point, all I can think is that the sound card is bad.
Would you agree with this assessment or am I forgetting something?
Thanks for your help.
Solved!
Go to Solution.

I'm not familiar with Linux Mint as I have been a Fedora guy for a long time, but since LM7 was
released in 2009, all audio drivers should be present for your machine. But, as I said, that could
be different for LM.
But you shouldn't have to do anything further regarding codecs or anything else, and since the Soundmax
uninstallation also removed the device as well, then it should be completely reset in the OS. Alas, is there
anything from Via in Control Panel - Add/Remove programs? If so, you should remove that before proceeding.
The driver for your machine is here:
Audio driver for Windows XP
And if you already installed this version, the driver can be found @ C:\DRIVERS\WIN\AUDIO
I did some rummaging through various forums today in regards to your issue, and found this one,
a couple of R51 users chime in there too.
http://forums.windrivers.com/printthread.php?t=73987&pp=40
and in the above link, a user found a solution by following the advise in this post:
http://www.techspot.com/community/topics/audio-drivers-not-found.14328/#post-184512
But instead of getting the drivers mentioned there, you could point to the installation location I
posted above.
One thing they mention in these threads, is running
sfc /scannow
in a command prompt, which checks your OS for essential system files, but for XP you'll
almost certainly need the Windows XP installation media.
Finally, here is another thread on audio issues for a R51 user:
http://www.techsupportforum.com/forums/f19/solved-ibm-r51-no-sound-512806.html
Sorry for a bit muddled reply, but there you go... something to sink your teeth in at least.
ThinkPad W540 (20BG) - i7-4800MQ/24GB // ThinkPad T440s (20AQ) - i7-4600U/12GB
ThinkPad T440p (20AW) - i7-4800MQ/16GB // ThinkPad Helix (3698-6EU) - i5-3337U/4GB
ThinkPad W520 (4282-W4Q) - i7-2720QM/32GB // ThinkPad T400 (2767-W1C) - P9500/8GB
ThinkPad T61 (7665-CTO) - T7700/4GB // ThinkPad T60p (8741-C2G) - T7400/4GB

HP ProBook 5220m Fan not working with battery power but work fine with adapter plugged in

Hi,
Any one have this issue?
HP ProBook 5220m (Bios Version F50) Fan not working with battery power but work fine with adapter plugged in.
This issue was found in my replacement motherboard. the original mother do not have this issue.
The origianl mother to be replace is due to can't power on after a power failure recovery. I believe was due to power surge killed the motherboard's power controller circuitry.
Appreciate any one can provide clue for resolving the problem.
I have tried to install speedfan to try my luck, but it can't any fan in the application to configure. (Bios Version F50)

@wheng
‎Thank you for using HP Support Forum. I have brought your issue to the appropriate team within HP. They will likely request information from you in order to look up your case details or product serial number. Please look for a private message from an identified HP contact. Additionally, keep in mind not to publicly post ( serial numbers and case details).
If you are unfamiliar with the Forum's private messaging please click here to learn more.
Thank you,
Omar
I Work for HP

Km4m-v not work with Semptron 2500+ ¡Solutioned!

Hi:
I buy these motherboard and update Bios to 1.4 but not work with Semptron 2500+. All work (memory, motherboard) if i put Athlon 2200+.
Please, help me.
Thanks
... The problems is CPU, is bad. Thanks.

It should do as is compatible.
Is this the only change you have done to system?
Define 'don't work' exactly. Does it post, can you get into bios?. Must always clear cmos when changing cpu's-have you done that?
psu specs? see my signature for what is required
make/model memory 1 or 2 sticks, speed?
for stability and performance best to run cpu: dram at 1:1
For best help create signature like mine, save people going back and forth to see what is in your rig? Press profile button at top then forum profile information I think
once you give us more information you will get better response

HD Led not working with SATA drives on MSI K7N2 Delta

I noticed the HD led does not work with the SATA drives on my MSI K7N2 Delta ISLR
I confirmed that the led is not burnt out by reconnecting a spare IDE HD with XP on it to IDE 1 and the led worked when there was activity, but it does not work when connected to IDE3 or if the SATA drives are connected to Serial 1 & 2.
Could it be because the motherboard doesn't support and hdd led for the Promise SATA controller.
I had Bios v7.3 and flashed to v7.4 with no luck.
Could a new bios update fix this problem?
Anybody seen this before?

basically it not wired up so works for no one

I have recently upgraded my iMac Intel G5 iSight to OS 10.6.8 and now the internal mic does not work with skype or facebook. I can here static when playing back clips. Do I need to update firmware or reload old sys parts

I have recently upgraded my iMac Intel G5 iSight (iMac5,1) to OS 10.6.8 and now the internal mic does not work with skype or facebook. I can here static when playing back clips. Do I need to update firmware or reload old system parts. I have zapped PRAM. The blue indicator in system audio panel will appear for a second as I slide the bar for internal mic but then it disappears. Is there a fix?

The sound seems very faint but can here static on playback.

My operating system windows XP not working with photoshop cloud, why not?

I need to add 2 more licences for photoshop cloud and I'm being told my operating system windows XP does not work with Photoshop cloud. We already have 2 pcs using it in our office so why not?
Please help
Roy

Do you have the latest version of iTunes? If not, get it at:
http://www.apple.com/itunes

Adobe creative cloud eea 1.5 is not working with our asus Eee box , celeron j1900 2.00 ghz, 4gb of ram, 64bit. can settings be changed in adobe?

adobe creative cloud eea 1.5 is not working with our asus Eee box , celeron j1900 2.00 ghz, 4gb of ram, 64bit. can settings be changed in adobe?

A chat session where an agent may remotely look inside your computer may help
Creative Cloud chat support (all Creative Cloud customer service issues)
http://helpx.adobe.com/x-productkb/global/service-ccm.html

Application is not working with mouse

Dear All,
We have a strange issue in the our application (Oracle form) in the one of our client machine.
Some times the forms are not able to work with the mouse but is able to work with the keyboard. After one or two machine restart its again working. When the issue occur we can able to work in other applications using mouse.
Our Applications server is in Other country and client are accessing from India.
This occurs for some user and not for all.
Application server Version 10.1.2.0.2.
Oracle Database 11g Enterprise Edition Release 11.2.0.1.0 - 64bit
Java Plug-in version 1.6.0_31 .
Please any info will help us lot.

Thank you for the quick replies Michael Ferrante and HamidHelal.
But since its occurring for some users (perticulary indian users) and some times. And also its occurring in production environment not in development environment.
Even the java control panel is not working with mouse.
For other country customers everything working fine.
So its difficult for me to apply the patch with these uncertainties.
Checking with fresh java installation and let you know the status.
Thanks.

Voice Memo is not working with iOS 8.2

Voice Memo Records is not working with iOS 8.2. how to fix it?

Voice Memo Records is not working with iOS 8.2. how to fix it?

On updating my iphone it shows no network inspite the sim inserted,now it also not working with itunes.i cant see menu page on display screen

on updating my iphone it shows no network inspite the sim inserted,now it also not working with itunes.
i cant see menu page on display screen

http://support.apple.com/kb/HT1808

Caller ID not working with Nokia 6600?

I have a T-Mobile (US) Nokia 6600, and I can't seem to get address book to display incoming SMS or the caller ID of incoming calls. I've successfully paired the phone via bluetooth, and I can make address book dial the phone and send an sms. I can sync via iSync, use my phone as a modem, etc. etc.
But regardless of what settings I tweak, I can't seem to get Address Book to show a bezel of any kind on incoming calls - not even an 'Unknown Caller' message! Am I missing something obvious? Third party apps like BluePhoneElite work just fine, so I'm pretty sure it's something wrong with Address Book...
15" Aluminum Powerbook 1.5 GHz Mac OS X (10.4.5)

mdcdsc wrote:
My caller ID does not work with the new ap either. I don't like the new ap at all. The old one was beautiful. Now my email is very hard to see, so much that I will just use the Apple email that comes with my IPOD. The caller ID was my favorite thing with the old ap. and now it doesn't work. I have followed the instructions and turned everything on, but it just does not work.
The Caller ID issue was due to an outage. It should be resolved anytime soon. Can yu log out and log back in. Go to app settings and in notifications and turn CAller ID off and on.
On email - what do you mean 'email is very hard to see' ? I would like to pass on this feedback to the team.

Flash player does not work with new ICS Android 4.0.4 OS. Has this problem been addressed?

Flash player does not work with new ICS Android 4.0.4 OS. Has this problem been addressed? I am using Firefox Beta for android and I also tried just Firefox.

Please check the Play Store app for any Flash updates and install them if present.

Flash player does not work with Ie or Firefox with win 8.1?

Flash player does not work with Ie or Firefox with win 8.1 64, If i try and play a video I get the message to install Flashplayer.
If I try and install it it says it is already installed. Your onsite installer says it is not applicable to my machine.
I have followed all the normal steps re enabling addons and active filters etc.
all to no avail Pc is Dell 6 months old, Flashplayer has never worked on this machine. Last MS update mid Dec 2014.
Version of flashplayer is 15....03.......

Flash Player is a built-in component of Internet Explorer. There's nothing separate to download or install.
Firefox requires a different version of Flash Player (the NPAPI plug-in), which will be served to you if you go here: http://get.adobe.com/flashplayer using Firefox; however, there are some unique stability issues related to Firefox on Win8.1, and you're probably better off using Google Chrome if you want a more optimal experience with Flash Player.
For problems where IE isn't being detected by sites that require Flash:
First, confirm that ActiveX Filtering is configured to allow Flash content:
https://forums.adobe.com/thread/867968
Internet Explorer 11 introduces a number of changes both to how the browser identifies itself to remote web servers, and to how it processes JavaScript intended to target behaviors specific to Internet Explorer. Unfortunately, this means that content on some sites will be broken until the content provider changes their site to conform to the new development approach required by modern versions of IE.
You can try to work around these issues by using Compatibility View:
http://windows.microsoft.com/en-us/internet-explorer/use-compatibility-view#ie=ie-11

G4MX420 not work with motherboard?

Similar Messages

Maybe you are looking for