G4mx440 d3d and other probs..

Ok, I have read through the threads here for a couple days and I am still having problems. First, my specs:
AMD Tbird 1.2ghz
Epox 8kta3
512mb SDRam
Windows XP Pro
and, obviously a MSI g4mx440..
I read about the psu problems everyone mentioned and thought confidantly that I was immune, but when I checked, my psu definately wasn't up to par, so I went and bought a new one:
PowMax LP-6100X-400w
+3.3v/28a +5v/30a +12v/25a -5v/.3a -12v/.8a
+5Vsb/2.0a
I am having problems with both the tabs added to the display window (both crash.. MSI clock & info and then disappear). A couple examples of games.. Half-Life.. D3D works, but not well.. i get major clipping (see through walls), opengl i get an hourglass and a message about "driver mismatch: exit is the only option."
NHL 2003, works fine through the menus, and then flys on for about 20 seconds into the game before it either locks or drops me out.
Other games work fine (Like Unreal Tournament).
I have tried every driver I can find, including hunting down Nvidia's 30.78 detonator driver, which a valve tech told me to try. Not to mention I reinstalled Windows XP, which I have not had any problems with until this episode. Any help, ideas, or observations of moronic mistakes I made would be greatly appreciated.
Thanks

http://www.directron.com/lp6100c.html
bit in red
Warning: High return rates showing below average reliability. We do not recommend it!

Similar Messages

Finder slow to start up and other probs

Guys, please help me.
This evening I started up my computer and the desktop icons were rather slow to appear as was the top menu bar. Also, my wireless internet connection wouldn't work for me. Sure I had a great connection but just no pages would load. At this time I had MenuMeters and Clear Dock running.
I have uninstalled MenuMeters and Clear Dock and everything seems to be fine, however, I was wondering if this problem was caused because of the MenuMeters and Clear Dock or because I only have 25gig of free space left on my computer?
Thank you.
Zuzu.

i don't know how big your hard drive is, but out of the 60 gigs of my hard drive, i only have 10 left, and it runs great...
You can always try to repair permissions, it's always good for the machine, it always runs better after
Hope this helps, Regards
C

Old card declined, new card "not eligible to purchase and other probs

Yesterday I was able to purchase an iTunes email gift cert through iTunes successfully. For the next gift certs, I decided to change the debit card linked to my iTunes account. But when I went to purchase again, I got this message:
+"This account is not currently eligible to purchase gift certificates+
+You can purchase iTunes Gift Cards from a variety of retail locations."+
I tried to go back and change the account settings to the original debit card and that card was "declined." Suffice it to say both cards are in good order and I'm able to use both of them elsewhere, there's plenty of money in there, etc.
Lastly, I tried to use PayPal which is also legit, well-funded, etc. and if I try to set that up, I am successfully directed to a browser to login to PayPal, authorize it to make purchases on iTunes with a "Billing Agreement" and go through the procedure of the browser launching iTunes with the requisite warnings. PayPal is then selected but to continue I get a message that PayPal +"is not set up with an instant payment method such as a debit card."+ If I click continue, I am sent BACK to PayPal to authenticate and authorize the account AGAIN in an endless loop.
I see other people having trouble with purchases and chimed in on another topic. Sounds like holiday shopping is crashing iTunes or something.

I waz able to purchase a gift card just now, but on the second attempt met up with the same message. Is there some block on purchasing more than 1 gift card at a time in a session or from an IP??
I wish, considering how much business Apple is doing, there was an 800# to handle these concerns or online chat. Many other digital-centric business have soemthing like that.

Keynote to iDVD: loss of audio in slide show and other probs

When I export my keynote straight to iDVD, the Keynotes play while in the working program. After I save an reopen the program to play, the Keynotes eventually crash iDVD. If I export them from Keynote as QT, although iI have the separate Soundtrack and .mov, when I import into iDVD the soundtrack plays while in the working iDVD program but after burning I lose the sound. I have the import audio checked. Any thoughts???
Peace,
Jim

I have had exaxctly the same problem and Apple Tech support has been unable to resolve the issue for me.
An additional problem is that although I have a perfectly timed presentation in Keynote with slide changes co-oresponding to the music whenever I try to burn it either in Ouicktime or iDVD both applications change the timing and Apple Tech Support has not provided a solution to the problem.
One thing that I discovered after trial and error is that you need to have all images in ther same format (jpeg or tiff) in order to avoid skips or gaps in the music. Apple support seemed unaware that that problem exists.
In many respects Keynote offers superior Flips, Page Turns,
Fades, etc to iMovie but it doesn't seem possible to retain them as well as the background music in any burning software that I have discovered.
donaldjs250

Captive Network Assistant checks 249 different airport, hotel and other misc WiFi hotspots adding a good 3 minutes to my startup time.

Hey there,
During startup of my MacBook Pro, Captive Network Assistant checks 249 different airport, hotel and other misc. WiFi hotspots. Proabaly adding a good 3 minutes to my startup time. ***? This all started while I was on extended layover at Amsterdam Schiphol Airport.
I thought Captive Network Assistant was an iOS thing. No iOS devices in my home or office. Here's a portion of the console log during startup.
2/20/12 4:34:13.000 PM kernel: en1: 802.11d country code set to 'US'.
2/20/12 4:34:13.000 PM kernel: en1: Supported channels 1 2 3 4 5 6 7 8 9 10 11 36 40 44 48 52 56 60 64 100 104 108 112 116 120 124 128 132 136 140 149 153 157 161 165
2/20/12 4:34:15.000 PM kernel: MacAuthEvent en1   Auth result for: 00:26:0a:ee:8f:b3 MAC AUTH succeeded
2/20/12 4:34:15.000 PM kernel: wlEvent: en1 en1 Link UP
2/20/12 4:34:15.000 PM kernel: AirPort: Link Up on en1
2/20/12 4:34:15.000 PM kernel: en1: BSSID changed to 00:26:0a:ee:8f:b3
2/20/12 4:34:16.386 PM genatsdb: *GENATSDB* FontObjects generated = 495
2/20/12 4:34:16.426 PM ntpd: bind(26) AF_INET6 fe80::fa1e:dfff:fed8:2f6d%5#123 flags 0x11 failed: Can't assign requested address
2/20/12 4:34:16.426 PM ntpd: unable to create socket on en1 (5) for fe80::fa1e:dfff:fed8:2f6d#123
2/20/12 4:34:23.308 PM configd: network configuration changed.
2/20/12 4:34:23.425 PM UserEventAgent: CaptiveNetworkSupport:CaptivePublishState:1211 en1 - Probe
2/20/12 4:34:23.552 PM UserEventAgent: CaptiveNetworkSupport:CNSPreferencesBuildSSIDLookup:278 ssidLookup:
2/20/12 4:34:23.552 PM UserEventAgent:   Estancia La Jolla
2/20/12 4:34:23.552 PM UserEventAgent:       0 : com.apple.cnstest
2/20/12 4:34:23.552 PM UserEventAgent:   PatientInternet
2/20/12 4:34:23.552 PM UserEventAgent:       0 : com.apple.cnstest
2/20/12 4:34:23.552 PM UserEventAgent:   MONZOON
2/20/12 4:34:23.552 PM UserEventAgent:       0 : com.apple.cnstest
2/20/12 4:34:23.553 PM UserEventAgent:   !Blue Peaks Public Wireless*~
2/20/12 4:34:23.554 PM UserEventAgent:       0 : com.apple.cnstest
2/20/12 4:34:23.554 PM UserEventAgent:   AIELKHORN
2/20/12 4:34:23.554 PM UserEventAgent:       0 : com.apple.cnstest
2/20/12 4:34:23.554 PM UserEventAgent:   Goldies341
2/20/12 4:34:23.554 PM UserEventAgent:       0 : com.apple.cnstest
2/20/12 4:34:23.555 PM UserEventAgent:   Royal on the Park Brisbane Pub
2/20/12 4:34:23.555 PM UserEventAgent:       0 : com.apple.cnstest
2/20/12 4:34:23.555 PM UserEventAgent:   hcc
2/20/12 4:34:23.555 PM UserEventAgent:       0 : com.apple.cnstest
2/20/12 4:34:23.555 PM UserEventAgent:   wireless_yokum
2/20/12 4:34:23.555 PM UserEventAgent:       0 : com.apple.cnstest
2/20/12 4:34:23.556 PM UserEventAgent:   Picospot
2/20/12 4:34:23.556 PM UserEventAgent:       0 : com.apple.cnstest
2/20/12 4:34:23.556 PM UserEventAgent:   bytelynk
2/20/12 4:34:23.556 PM UserEventAgent:       0 : com.apple.cnstest
2/20/12 4:34:23.556 PM UserEventAgent:   Lynmar
2/20/12 4:34:23.556 PM UserEventAgent:       0 : com.apple.cnstest
2/20/12 4:34:23.556 PM UserEventAgent:   WEBbeams-Argo Tea
2/20/12 4:34:23.556 PM UserEventAgent:       0 : com.apple.cnstest
2/20/12 4:34:23.556 PM UserEventAgent:   ETHOSTREAM
Several hunderd lines of the same omitted..........
2/20/12 4:34:23.556 PM UserEventAgent:       0 : com.apple.cnstest
2/20/12 4:34:23.556 PM UserEventAgent:   bigwireless
2/20/12 4:34:23.556 PM UserEventAgent:       0 : com.apple.cnstest
2/20/12 4:34:23.556 PM UserEventAgent:   ParkInn-ethostream
2/20/12 4:34:23.556 PM UserEventAgent:       0 : com.apple.cnstest
2/20/12 4:34:23.556 PM UserEventAgent:   High Speed Internet
2/20/12 4:34:23.581 PM UserEventAgent:   OBC_wireless
2/20/12 4:34:23.581 PM UserEventAgent:       0 : com.apple.cnstest
2/20/12 4:34:23.581 PM UserEventAgent:   BTOpenzone-CaffeNero
2/20/12 4:34:23.581 PM UserEventAgent:       0 : com.apple.cnstest
2/20/12 4:34:23.581 PM UserEventAgent:   Airport View
2/20/12 4:34:23.581 PM UserEventAgent:       0 : com.apple.cnstest
2/20/12 4:34:23.581 PM UserEventAgent:   Telefonica
2/20/12 4:34:23.581 PM UserEventAgent:       0 : com.apple.cnstest
2/20/12 4:34:23.581 PM UserEventAgent:   Oaks Calypso Public Wireless
2/20/12 4:34:23.582 PM UserEventAgent:       0 : com.apple.cnstest
2/20/12 4:34:23.582 PM UserEventAgent:   White Sands Beach Resort
2/20/12 4:34:23.582 PM UserEventAgent:       0 : com.apple.cnstest
2/20/12 4:34:23.582 PM UserEventAgent:   public-supsi
2/20/12 4:34:23.582 PM UserEventAgent:       0 : com.apple.cnstest
2/20/12 4:34:23.582 PM UserEventAgent:   La Quinta Inn
2/20/12 4:34:23.582 PM UserEventAgent:       0 : com.apple.cnstest
2/20/12 4:34:23.582 PM UserEventAgent:   radisson
2/20/12 4:34:23.582 PM UserEventAgent:       0 : com.apple.cnstest
2/20/12 4:34:23.582 PM UserEventAgent: *** process 11 exceeded 500 log message per second limit - remaining messages this second discarded ***
2/20/12 4:34:23.910 PM UserEventAgent: CaptiveUserAgent:doLaunchWebsheet:119 can't run websheet, -43
2/20/12 4:34:23.926 PM configd: network configuration changed.
2/20/12 4:34:24.016 PM com.apple.launchd: (com.apple.xprotectupdater[51]) Exited with code: 253
Looking at the times, I see this only takes a fraction of a second but my startup time is still much much longer than it ever was or should.
Does anyone have any idea on how to get rid of this? I deleted the Captive Network Assistant.app from my computer but the checking continues. It seems to be a rarely mentioned issue doing a web search, and nothing like this, although it's referred to in certain articles.
Really weird.
Gregg

I'd take another look at your startup log.
If you look closely, you'll see that all those log messages occurred in the space of 30 milliseconds - by comparison, a human blink takes about 150 milliseconds.
So while I don't doubt you're seeing slow startup time, I don't think CaptiveNetworkSupport is the culprit, per se.
Fortunately, since every startup event is timestamped, it should be easy enough to determine what task is taking the most time.
As for CNS, it's not just an iOS thing - it's standard in Mac OS X, too. I'm also under the impression (but can't confirm) that it only checks the networks that you've previously connected to, so check System Preferences -> Network -> AirPort -> Advanced -> WiFi and delete any networks you no longer use or expect to connect to.

Flash Drive not mounting, shows up in sys. prof. and USB Prober

I have a 4Gig Flash Drive that doesn't mount. It shows up in both SYstem Profiler and USB Prober. Is there any way to "fix" it? I don't need to recover any files - I just want to be able to use it.
It used to work, maybe a year ago. Havn't touched it since.
The port is just fine, it's definitely the drive.
Thanks for your time!

it doesn't show up in disk utility. unless there is a way to force mount it, disk utility can't help.

Filenames in ufs_write and zfs_write probes?

I'm trying to find a way to get dtrace to capture filenames of files that are being written to in ufs or zfs filesystems. I don't want, for example, writes to device files.
I got the following from a post on the OpenSolaris forum (http://opensolaris.org/jive/thread.jspa?messageID=472665)
syscall::write:entry
self->filename = fds[arg0].fi_pathname;
printf ("Filename: %s\n", self->filename);
With this, however, I get all the /devices/psuedo/pts* with every shell command that gets executed. I've tried processing the self->filename variable with subsequent probes in order to narrow it down to what I'm looking for, but I keep running into various problems.
What would be really helpful if there was a way to grab filenames within the ufs_write and zfs_write probes instead of having to use the syscall::write probe. Does anybody know if there is a mechanism in the file system probes that is similar to the above example?

Thank you very much!!
The fsinfo provider is not documented on the the DTrace documentation wiki. Or, if it is, it's not on the front page with all the other providers. (http://wikis.sun.com/display/DTrace/Documentation) Not sure I would ever have stumbled across that on my own.
Playing around a bit I also found that:
args[0]->fi_dirname gives you the directory the write took place in
args[0]->fi_mount gives you the filesystem mountpoint the write took place in

How do I get rid of Mackeeper and other random pop-ups?

Yes I am aware that i may downloaded something bad while trying to watch a movie. I have read a lot of comments of how to get rid of them and I some how can't get rid of it. I cleared my extensions, blocked pop-windows, and trashed every file from my finder applications. Any help? Please and thank you! (I have a Macbook Air if that helps)

1. This procedure is a diagnostic test. It changes nothing, for better or worse, and therefore will not, in itself, solve the problem. But with the aid of the test results, the solution may take a few minutes, instead of hours or days.
Don't be put off by the complexity of these instructions. The process is much less complicated than the description. You do harder tasks with the computer all the time.
2. If you don't already have a current backup, back up all data before doing anything else. The backup is necessary on general principle, not because of anything in the test procedure. Backup is always a must, and when you're having any kind of trouble with the computer, you may be at higher than usual risk of losing data, whether you follow these instructions or not.
There are ways to back up a computer that isn't fully functional. Ask if you need guidance.
3. Below are instructions to run a UNIX shell script, a type of program. As I wrote above, it changes nothing. It doesn't send or receive any data on the network. All it does is to generate a human-readable report on the state of the computer. That report goes nowhere unless you choose to share it. If you prefer, you can act on it yourself without disclosing the contents to me or anyone else.
You should be wondering whether you can believe me, and whether it's safe to run a program at the behest of a stranger. In general, no, it's not safe and I don't encourage it.
In this case, however, there are a couple of ways for you to decide whether the program is safe without having to trust me. First, you can read it. Unlike an application that you download and click to run, it's transparent, so anyone with the necessary skill can verify what it does.
You may not be able to understand the script yourself. But variations of it have been posted on this website thousands of times over a period of years. The site is hosted by Apple, which does not allow it to be used to distribute harmful software. Any one of the millions of registered users could have read the script and raised the alarm if it was harmful. Then I would not be here now and you would not be reading this message.
Nevertheless, if you can't satisfy yourself that these instructions are safe, don't follow them. Ask for other options.
4. Here's a summary of what you need to do, if you choose to proceed:
☞ Copy a line of text in this window to the Clipboard.
☞ Paste into the window of another application.
☞ Wait for the test to run. It usually takes a few minutes.
☞ Paste the results, which will have been copied automatically, back into a reply on this page.
The sequence is: copy, paste, wait, paste again. You don't need to copy a second time. Details follow.
5. You may have started the computer in "safe" mode. Preferably, these steps should be taken in “normal” mode, under the conditions in which the problem is reproduced. If the system is now in safe mode and works well enough in normal mode to run the test, restart as usual. If you can only test in safe mode, do that.
6. If you have more than one user, and the one affected by the problem is not an administrator, then please run the test twice: once while logged in as the affected user, and once as an administrator. The results may be different. The user that is created automatically on a new computer when you start it for the first time is an administrator. If you can't log in as an administrator, test as the affected user. Most personal Macs have only one user, and in that case this section doesn’t apply. Don't log in as root.
7. The script is a single long line, all of which must be selected. You can accomplish this easily by triple-clicking anywhere in the line. The whole line will highlight, though you may not see all of it in the browser window, and you can then copy it. If you try to select the line by dragging across the part you can see, you won't get all of it.
Triple-click anywhere in the line of text below on this page to select it:
PATH=/usr/bin:/bin:/usr/sbin:/sbin:/usr/libexec;clear;cd;p=(Software Hardware Memory Diagnostics Power FireWire Thunderbolt USB Bluetooth SerialATA Extensions Applications Frameworks PrefPane Fonts 1024 85 percent 20480 1 MB/s 25000 ports KiB/s DYLD_INSERT_LIBRARIES\ DYLD_LIBRARY_PATH -86 "` route -n get default|awk '/e:/{print $2}' `" 25 N\\/A down up 102400 25600 recvfrom sendto CFBundleIdentifier 25 25 25 1000 MB 'com.adobe.AAM.Updater-1.0 com.adobe.AAM.Updater-1.0 com.adobe.AdobeCreativeCloud com.adobe.CS4ServiceManager com.adobe.CS5ServiceManager com.adobe.fpsaud com.adobe.SwitchBoard com.adobe.SwitchBoard com.apple.aelwriter com.apple.AirPortBaseStationAgent com.apple.FolderActions.enabled com.apple.installer.osmessagetracing com.apple.mrt.uiagent com.apple.ReportCrash.Self com.apple.rpmuxd com.apple.SafariNotificationAgent com.apple.usbmuxd com.citrixonline.GoToMeeting.G2MUpdate com.google.keystone.agent com.google.keystone.daemon com.microsoft.office.licensing.helper com.oracle.java.Helper-Tool com.oracle.java.JavaUpdateHelper com.oracle.java.JavaUpdateHelper org.macosforge.xquartz.privileged_startx org.macosforge.xquartz.privileged_startx org.macosforge.xquartz.startx' '879294308 4071182229 461455494 3627668074 1083382502 1274181950 1855907737 2758863019 1848501757 464843899 3694147963 1233118628 2456546649 2806998573 2778718105 2636415542 842973933 2051385900 3301885676 891055588 998894468 695903914 1443423563 4136085286 523110921 2883943871 3873345487' 51 5120 files 4 1000 25 5120 -\\t 'PlistBuddy -c Print' );N5=${#p[@]};p[N5]=` networksetup -listnetworkserviceorder|awk ' NR>1 { sub(/^$[0-9]+$ /,"");n=$0;getline;} $NF=="'${p[26]}')" { sub(/.$/,"",$NF);print n;exit;} ' `;f=('\n%s: %s\n' '\n%s\n\n%s\n' '\nRAM details\n%s\n' %s\ %s '%s\n'"${p[50]}"'%s\n' '%s (UID %s) is using %s %s' '\nContents of %s\n '"${p[50]}"'mod date: %s\n '"${p[50]}"'checksum: %s\n%s\n' '\n ...and %s more line(s)\n' );S0() { echo ' { q=$NF+0;$NF="";u=$(NF-1);$(NF-1)="";gsub(/^ +| +$/,"");if(q>='${p[$1]}') printf("'"${f[5]}"'",$0,u,q,"'${p[$2]}'");} ';};s=(' s/[0-9A-Za-z._]+@[0-9A-Za-z.]+\.[0-9A-Za-z]{2,4}/EMAIL/g;/faceb/s/(at\.)[^.]+/\1NAME/g;/\/Shared/!s/(\/Users\/)[^ /]+/\1USER/g;s/[-0-9A-Fa-f]{22,}/UUID/g;' ' s/^ +//;/de: S|[nst]:/p;' ' {sub(/^ +/,"")};/er:/;/y:/&&$2<'${p[46]} ' 1s/://;3,6d;/[my].+:/d;s/^ {4}//;H;${ g;s/\n$//;/s: (E[^m]|[^EO])|x([^08]|02[^F]|8[^0])/p;} ' ' 5h;6{ H;g;/P/!p;} ' ' ($1~/^Cy/&&$3>'${p[47]}')||($1~/^Cond/&&$2!~/^N/) ' ' /:$/{ N;/:.+:/d;s/ *://;b0'$'\n'' };/^ *(V.+ [0N]|Man).+ /{ s/ 0x.... //;s/[()]//g;s/(.+: )(.+)/ (\2)/;H;};$b0'$'\n'' d;:0'$'\n'' x;s/\n\n//;/Apple[ ,]|Genesy|Intel|SMSC/d;s/\n.*//;/\)$/p;' ' s/^.*C/C/;H;${ g;/No th|pms/!p;} ' '/= [^GO]/p' '{$1=""};1' ' /Of/!{ s/^.+is |\.//g;p;} ' ' $0&&!/ / { n++;print;} END { if(n<10) print "com.apple.";} ' ' { sub(/ :/,"");print|"tail -n'${p[48]}'";} ' ' NR==2&&$4<='${p[49]}' { print $4;} ' ' END { $2/=256;if($2>='${p[15]}') print int($2) } ' ' NR!=13{next};{sub(/[+-]$/,"",$NF)};'"`S0 21 22`" 'NR!=2{next}'"`S0 37 17`" ' NR!=5||$8!~/[RW]/{next};{ $(NF-1)=$1;$NF=int($NF/10000000);for(i=1;i<=3;i++){$i="";$(NF-1-i)="";};};'"`S0 19 20`" 's:^:/:p' '/\.kext\/(Contents\/)?Info\.plist$/p' 's/^.{52}(.+) <.+/\1/p' ' /Launch[AD].+\.plist$/ { n++;print;} END { if(n<200) print "/System/";} ' '/\.xpc\/(Contents\/)?Info\.plist$/p' ' NR>1&&!/0x|\.[0-9]+$|com\.apple\.launchctl\.(Aqua|Background|System)$/ { print $3;} ' ' /\.(framew|lproj)|\):/d;/plist:|:.+(Mach|scrip)/s/:.+//p ' '/^root$/p' ' !/^\/[AD]|\/Contents\/.+\/Contents\/|\.prefP/&&/\/(Lib|usr).+\/(.+\.lproj|Contents|Info\.plist|Resources)|\.framework$/ { n++;sub(/\/Info\.plist$/,"");sub(/\/([A-Za-z_]+\.lproj|Contents|Resources|Versions)(\/.+)?/,"");print|"sort|uniq";} END { if(n<1100) print "/System/";} ' '/\.dylib$/p' ' /Temp|emac/{next};/(etc|Preferences|Launch[AD].+)\// { sub(".(/private)?","");n++;print;} END { split("'"${p[41]}"'",b);split("'"${p[42]}"'",c);for(i in b) print b[i]".plist\t"c[i];if(n<500) print "Launch";} ' ' /^\/(Ap|Dev|Inc|Prev)/d;/\.(component|mdimporter|plugin|qlgenerator|saver|wdgt)$/p;' 's/Pr.+n //p' ' BEGIN{FS=":"};{ if($1~/\.kext$/) { s=system("'"${p[51]}"'\\ :OSBundleRequired "$1"/*/I*|grep -q Sa");if(!s) $1=$1" S";if(!$2) $2="N/A";printf("'"${f[4]}"'",$1,$2); } else print;} ' p '{print $3"\t"$1}' 's/\'$'\t''.+//p' 's/1/On/p' '/Prox.+: [^0]/p' '$2>'${p[43]}'{$2=$2-1;print}' ' BEGIN { i="'${p[26]}'";M1='${p[16]}';M2='${p[18]}';M3='${p[31]}';M4='${p[32]}';} !/^A/{next};/%/ { getline;if($5<M1) a="user "$2"%, system "$4"%";} /disk0/&&$4>M2 { b=$3" ops/s, "$4" blocks/s";} $2==i { if(c) { d=$3+$4+$5+$6;next;};if($4>M3||$6>M4) c=int($4/1024)" in, "int($6/1024)" out";} END { if(a) print "CPU: "a;if(b) print "I/O: "b;if(c) print "Net: "c" (KiB/s)";if(d) print "Net errors: "d" packets/s";} ' ' /r\[0\] /&&$NF!~/^1(0|72\.(1[6-9]|2[0-9]|3[0-1])|92\.168)\./ { print $NF;exit;} ' ' !/^T/ { printf "(static)";exit;} ' '/apsd|BKAg|OpenD/!s/:.+//p' ' (/k:/&& $3!~/(255\.){3}0/)||(/v6:/&&$2!~/A/) ' ' $1~"lR"&&$2<='${p[25]}';$1~"li"&&$3!~"wpa2";' ' BEGIN { FS=":";p="uniq -c|sed -E '"'s/ +\$[0-9]+\$\$.+\$/\\\2 x\\\1/;s/x1$//'"'";} { n=split($3,a,".");sub(/_2[01].+/,"",$3);print $2" "$3" "a[n]$1|p;b=b$1;} END { close(p);if(b) print("\n\t* Code injection");} ' ' NR!=4{next} {$NF/=10240} '"`S0 27 23`" ' END { if($3~/[0-9]/)print$3;} ' ' BEGIN { L='${p[36]}';} !/^[[:space:]]*(#.*)?$/ { l++;if(l<=L) f=f"\n "$0;} END { F=FILENAME;if(!F) exit;if(!f) f="\n [N/A]";"cksum "F|getline C;split(C, A);C=A[1];"stat -f%Sm "F|getline D;"file -b "F|getline T;if(T~/^Apple b/) { f="";l=0;while("'"${p[51]}"' "F|getline g) { l++;if(l<=L) f=f"\n "g;};};if(T!~/^(AS.+ (En.+ )?text(, with v.+)?$|(Bo|PO).+ sh.+ text ex|XM)/) F=F"\n '"${p[50]}"'"T;printf("'"${f[6]}"'",F,D,C,f);if(l>L) printf("'"${f[7]}"'",l-L);} ' ' s/^ ?n...://p;s/^ ?p...:/-'$'\t''/p;' 's/0/Off/p' ' END{print NR} ' ' /id: N|te: Y/{i++} END{print i} ' ' / / { print "'"${p[28]}"'";exit;};1;' '/ en/!s/\.//p' ' NR!=13{next};{sub(/[+-M]$/,"",$NF)};'"`S0 39 40`" ' $10~/$L/&&$9!~"localhost" { sub(/.+:/,"",$9);print $1": "$9|"sort|uniq";} ' '/^ +r/s/.+"(.+)".+/\1/p' 's/(.+\.wdgt)\/(Contents\/)?Info\.plist$/\1/p' 's/^.+\/(.+)\.wdgt$/\1/p' ' /l: /{ /DVD/d;s/.+: //;b0'$'\n'' };/s: /{ /V/d;s/^ */- /;H;};$b0'$'\n'' d;:0'$'\n'' x;/APPLE [^:]+$/d;p;' ' /^find: /d;p;' "`S0 44 45`" ' BEGIN{FS="= "} /Path/{print $2} ' ' /^ *$/d;s/^ */ /;' ' s/^.+ |\(.+$$//g;p ' '/\.(appex|pluginkit)\/Contents\/Info\.plist$/p' ' /2/{print "WARN"};/4/{print "CRITICAL"};' ' /EVHF|MACR|^s/d;s/^.+: //p;' ' $3~/^[1-9][0-9]{0,2}(\.[1-9][0-9]{0,2}){2}$/ { i++;n=n"\n"$1"\t"$3;} END { if(i>1) print n;} ' ' s/:[^:]+$//;s/ +([0-9]+)(.+)/\2: \1/p;' ' { gsub(/[()"]/,"",$3);if(!$3) $3="N/A";print $3;} ' ' /es: ./{ s/^.+://;b0'$'\n'' };/^ +C.+ted: +[NY]/H;/:$/b0'$'\n'' d;:0'$'\n'' x;/: +N/d;s/\n.+//p;' ' 1d;/:$/b0'$'\n'' $b0'$'\n'' /(D|^ *Loc.+): /{ s/^.+: //;H;};/(By|m): /H;d;:0'$'\n'' x;/[my]: [AM]|^\/Vo/d;s/(^|\n) [ -~]+//g;s/(.+)\n(.+)/\2:\1/;s/\n//g;/[ -~]/p;' );c1=(system_profiler pmset\ -g nvram fdesetup find syslog df vm_stat sar ps crontab iotop top pkgutil 'PlistBuddy 2>&1 -c Print\' whoami cksum kextstat launchctl smcDiagnose sysctl\ -n defaults\ read stat lsbom 'mdfind -onlyin /' ' for i in ${p[24]};do ${c1[18]} ${c2[27]} $i;done;' pluginkit scutil dtrace profiles sed\ -En awk /S*/*/P*/*/*/C*/*/airport networksetup mdutil lsof test osascript\ -e netstat mdls kextfind );S1() { printf kMDItemContentTypeTree=com.apple.$1;};S2() { printf 'L*/Ca*/com.ap*.Saf*/E*/* -d 1 -name In*t -exec '"${c1[14]}"' :'$1' {} \;|uniq';};c2=(com.apple.loginwindow\ LoginHook ' /L*/P*/loginw*' "'tell app \"System Events\" to get properties of login items'|tr , \\\n" "`S2 CFBundleDisplayName`" '~ $TMPDIR.. $ -flags +sappnd,schg,uappnd,uchg -o ! -user $UID -o ! -perm -600 $' '-F \$Message -k Sender kernel -k Message CSeq "I/O e"|sort|uniq -c' :${p[35]} :Label '{/,}L*/{Con,Pref}* -type f ! -size 0 -name *.plist -exec plutil -s {} \;' "-f'%N: %l' Desktop L*/Keyc*" therm sysload boot-args status " -F '\$Time \$(RefProc): \$Message' -k Sender Req 'fsev|kern|launchd' -k RefProc Rne 'Aq|WebK' -k Message Rne '08012|Goog|ksadm|probe|Roame|SMC:|smcD|sserti|suhel| VALI|ver-r|xpma' -k Message Req 'abn|bad |Beac|caug|corru|dead[^bl]|FAIL|fail|GPU |hfs: Ru|idle ex|inval|jnl:|last value [1-9]|NVDA$|pagin|pci pa|proc: t|Roamed|rror|SL|TCON|Throttli|tim(ed? ?|ing )o|WARN' " '-du -n DEV -n EDEV 1 10' 'acrx -o comm,ruid,%cpu' '-t1 10 1' '-f -pfc /var/db/r*/com.apple.*.{BS,Bas,Es,J,OSXU,Rem,up}*.bom' '{/,}L*/Lo*/Diag* -type f -regex .\*[cght] ! -name .?\* ! -name \*ag \( -exec grep -lq "^Thread c" {} \; -exec printf \* \; -o -true $ -execdir stat -f:%Sc:%N -t%F {} \;|sort -t: -k2 |tail -n'${p[38]} '/S*/*/Ca*/*xpc* >&- ||echo No' '-L /{S*/,}L*/StartupItems -type f -exec file {} +' "`S1 bundle`" "`S1 mach-o-dylib`" "`S2 ${p[35]}`" "/e*/{auto,{cron,fs}tab,hosts,{[lp],sy}*.conf,mach_i*/*,pam.d/*,ssh{,d}_config,*.local} {,/usr/local}/etc/periodic/*/* /L*/P*{,/*}/com.a*.{Bo,sec*.ap}*t {/S*/,/,}L*/Lau*/*t .launchd.conf" list getenv /Library/Preferences/com.apple.alf\ globalstate --proxy '-n get default' -I --dns -getdnsservers\ "${p[N5]}" -getinfo\ "${p[N5]}" -P -m\ / '' -n1 '-R -l1 -n1 -o prt -stats command,uid,prt' '--regexp --files com.apple.pkg.*|sort|uniq' -kl -l -s\ / '-R -l1 -n1 -o mem -stats command,uid,mem' '+c0 -i4TCP:0-1023' com.apple.dashboard\ layer-gadgets '-d /L*/Mana*/$USER&&echo On' '-app Safari WebKitDNSPrefetchingEnabled' "+c0 -l|awk '{print(\$1,\$3)}'|sort|uniq -c|sort -n|tail -1|awk '{print(\$2,\$3,\$1)}'" -m 'L*/{Con*/*/Data/L*/,}Pref* -type f -size 0c -name *.plist.???????|wc -l' kern.memorystatus_vm_pressure_level '3>&1 >&- 2>&3' " -F '\$Time \$Message' -k Sender kernel -k Message CSeq 'n Cause: -' " -i '-app Safari UserStyleSheetEnabled' -name\ kMDItem${p[35]} '-nl -print -print-diagnostics' );N1=${#c2[@]};for j in {0..14};do c2[N1+j]=SP${p[j]}DataType;done;N2=${#c2[@]};for j in 0 1;do c2[N2+j]="-n ' syscall::'${p[33+j]}':return { @out[execname,uid]=sum(arg0) } tick-10sec { trunc(@out,1);exit(0);} '";done;l=(Restricted\ files I/O\ errors 'Elapsed time (s)' POST Battery Safari\ extensions Bad\ plists 'High file counts' User Heat System\ load boot\ args FileVault Diagnostic\ reports Log 'Free space (MiB)' 'Swap (MiB)' Activity 'CPU per process' Login\ hook 'I/O per process' Mach\ ports kexts Daemons Agents XPC\ cache Startup\ items Admin\ access Root\ access Bundles dylibs Stylesheet Font\ issues Inserted\ dylibs Firewall Proxies DNS TCP/IP Wi-Fi Profiles Root\ crontab User\ crontab 'Global login items' 'User login items' Spotlight Memory Listeners Widgets Parental\ Controls Prefetching Nets Descriptors App\ extensions Lockfiles Memory\ pressure SMC Shutdowns Bad\ kexts );N3=${#l[@]};for i in {0..8};do l[N3+i]=${p[5+i]};done;N4=${#l[@]};for j in 0 1;do l[N4+j]="Current ${p[29+j]}stream data";done;A0() { Q=5;v[2]=1;id -G|grep -qw 80;v[1]=$?;((v[1]))||{ Q=7;sudo true;v[2]=$?;((v[2]))||Q=8;};v[3]=`date +%s`;clear >&-;date '+Start time: %T %D%n';};for i in 0 1;do eval ' A'$((1+i))'() { v=` eval "${c1[$1]} ${c2[$2]}"|'${c1[30+i]}' "${s[$3]}" `;[[ "$v" ]];};A'$((3+i))'() { v=` while read i;do [[ "$i" ]]&&eval "${c1[$1]} ${c2[$2]}" \"$i\"|'${c1[30+i]}' "${s[$3]}";done<<<"${v[$4]}" `;[[ "$v" ]];};A'$((5+i))'() { v=` while read i;do '${c1[30+i]}' "${s[$1]}" "$i";done<<<"${v[$2]}" `;[[ "$v" ]];};A'$((7+i))'() { v=` eval sudo "${c1[$1]} ${c2[$2]}"|'${c1[30+i]}' "${s[$3]}" `;[[ "$v" ]];};';done;A9(){ v=$((`date +%s`-v[3]));};B2(){ v[$1]="$v";};for i in 0 1;do eval ' B'$i'() { v=No;((v['$((i+1))']==0))&&v=;};B'$((3+i))'() { v[$2]=`'${c1[30+i]}' "${s[$3]}"<<<"${v[$1]}"`;} ';done;B5(){ v[$1]="${v[$1]}"$'\n'"${v[$2]}";};B6() { v=` paste -d: <(printf "${v[$1]}") <(printf "${v[$2]}")|awk -F: ' {printf("'"${f[$3]}"'",$1,$2)} ' `;};B7(){ v=`grep -Fv "${v[$1]}"<<<"$v"|sort`;};C0() { [[ "$v" ]]&&sed -E "$s"<<<"$v";};C1() { [[ "$v" ]]&&printf "${f[$1]}" "${l[$2]}" "$v"|sed -E "$s";};C2() { v=`echo $v`;[[ "$v" != 0 ]]&&C1 0 $1;};C3() { v=`sed -E "${s[63]}"<<<"$v"`&&C1 1 $1;};C4() { echo "Part $((++P)) of $Q done at $((`date +%s`-v[3])) sec">&4;};for i in 1 2 7 8;do for j in 0 2 3;do eval D$i$j'(){ A'$i' $1 $2 $3; C'$j' $4;};';done;done;{ A0;D20 0 $((N1+1)) 2;D10 0 $N1 1;B0;C2 27;B0&&! B1&&C2 28;D12 15 37 25 8;A1 0 $((N1+2)) 3;C0;D13 0 $((N1+3)) 4 3;D23 0 $((N1+4)) 5 4;D13 0 $((N1+9)) 59 $((N3+4));for i in 0 1 2;do D13 0 $((N1+5+i)) 6 $((N3+i));done;D13 0 $((N1+8)) 71 $((N3+3));D13 1 10 7 9;D13 1 11 8 10;B1&&D73 19 53 67 55;D22 2 12 9 11;D12 3 13 10 12;D23 4 19 44 13;B0&&{ D13 5 5 69 1;D13 5 54 30 56;C4;D23 5 14 12 14;C4;};D22 6 36 13 15;D22 20 52 66 54;D22 7 37 14 16;D23 8 15 38 17;D22 9 16 16 18;C4;B1&&{ D82 35 49 61 51;D82 11 17 17 20;for i in 0 1;do D82 28 $((N2+i)) 45 $((N4+i));done;C4;};D22 12 44 54 45;D22 12 39 15 21;D13 40 58 32 57;A1 13 40 18;B2 4;B3 4 0 19;A3 14 6 32 0;B4 0 5 11;C4;A1 17 41 20;B7 5;C3 22;B4 4 6 21;A3 14 7 32 6;B4 0 7 11;B3 4 0 22;A3 14 6 32 0;B4 0 8 11;B5 7 8;B1&&{ A8 18 26 23;B7 7;C3 23;};A2 18 26 23;B7 7;C3 24;D13 4 21 24 26;B4 4 12 26;C4;for i in {0..3};do A1 0 $((N1+10+i)) 72;B7 12;B4 0 0 31;((i))&&{ B2 14;A4 39 57 70 14;B2 15;B6 14 15 4;};C3 $((N3+5+i));done;A1 24 22 29;B7 12;B2 14;A4 39 57 70 0;B2 15;B6 14 15 4;C3 29;C4;B3 4 13 27;A1 24 23 32;B7 13;C3 30;B3 4 0 65;A3 14 6 32 0;B4 0 16 11;A1 26 50 64;B7 16;C3 52;D13 25 37 32 33;A2 23 18 28;B2 16;A2 16 25 33;B7 16;B3 0 0 34;B2 21;A6 47 21&&C0;B1&&{ D73 21 0 32 19;D73 10 42 32 40;D82 29 35 46 39;};D23 14 1 62 42;D12 34 43 53 44;D12 22 20 32 25;D22 0 $((N1+14)) 51 32;D13 4 8 41 6;D12 21 28 35 34;D13 27 29 36 35;A2 27 32 39&&{ B2 19;A2 33 33 40;B2 20;B6 19 20 3;};C2 36;D23 38 55 68 50;D23 33 34 42 37;B1&&D83 35 45 55 46;D23 32 31 43 38;D12 36 47 32 48;D13 10 42 32 41;D13 37 2 48 43;A1 4 3 60;B2 30;A1 4 24 60;B2 31;B6 30 31 4;C3 5;D12 21 56 35 31;D12 21 48 49 49;B3 4 22 57;A1 21 46 56;B7 22;B3 0 0 58;C3 47;D22 4 4 50 0;D12 4 51 32 53;D23 22 9 37 7;A9;C2 2;C4;} 4>&2 2>/dev/null|pbcopy;exit 2>&-
Copy the selected text to the Clipboard by pressing the key combination command-C.
8. Launch the built-in Terminal application in any of the following ways:
☞ Enter the first few letters of its name into a Spotlight search. Select it in the results (it should be at the top.)
☞ In the Finder, select Go ▹ Utilities from the menu bar, or press the key combination shift-command-U. The application is in the folder that opens.
☞ Open LaunchPad and start typing the name.
Click anywhere in the Terminal window and paste by pressing command-V. The text you pasted should vanish immediately. If it doesn't, press the return key.
9. If you see an error message in the Terminal window such as "Syntax error" or "Event not found," enter
exec bash
and press return. Then paste the script again.
10. If you're logged in as an administrator, you'll be prompted for your login password. Nothing will be displayed when you type it. You will not see the usual dots in place of typed characters. Make sure caps lock is off. Type carefully and then press return. You may get a one-time warning to be careful. If you make three failed attempts to enter the password, the test will run anyway, but it will produce less information. In most cases, the difference is not important. If you don't know the password, or if you prefer not to enter it, press the key combination control-C or just press return three times at the password prompt. Again, the script will still run.
If you're not logged in as an administrator, you won't be prompted for a password. The test will still run. It just won't do anything that requires administrator privileges.
11. The test may take a few minutes to run, depending on how many files you have and the speed of the computer. A computer that's abnormally slow may take longer to run the test. While it's running, there will be a series of messages in the Terminal window like this:
Part 1 of 8 done at … sec
Part 8 of 8 done at … sec
The messages won't be spaced equally apart in time, but they give a rough indication of progress. The total number of parts may be different from what's shown here.
Wait for the final message
[Process completed]
to appear. If you don't see it within half an hour or so, the test probably won't complete in a reasonable time. In that case, close the Terminal window and report the last message you saw. No harm will be done.
12. When the test is complete, quit Terminal. The results will have been copied to the Clipboard automatically. They are not shown in the Terminal window. Please don't copy anything from there. All you have to do is start a reply to this comment and then paste by pressing command-V again.
At the top of the results, there will be a line that begins with the words "Start time." If you don't see that, but instead see a mass of gibberish, you didn't wait for the "Process completed" message to appear in the Terminal window. Please wait for it and try again.
If any private information, such as your name or email address, appears in the results, anonymize it before posting. Usually that won't be necessary.
13. When you post the results, you might see an error message on the web page: "You have included content in your post that is not permitted," or "You are not authorized to post." That's a bug in the forum software. Please post the test results on Pastebin, then post a link here to the page you created.
14. This is a public forum, and others may give you advice based on the results of the test. They speak only for themselves, and I don't necessarily agree with them.
Copyright © 2014 by Linc Davis. As the sole author of this work, I reserve all rights to it except as provided in the Use Agreement for the Apple Support Communities website ("ASC"). Readers of ASC may copy it for their own personal use. Neither the whole nor any part may be redistributed.

Convert smart quotes and other high ascii characters to HTML

I'd like to set up Dreamweaver CS4 Mac to automatically convert smart quotes and other high ASCII characters (m-dashes, accent marks, etc.) pasted from MS Word into HTML code. Dreamweaver 8 used to do this by default, but I can't find a way to set up a similar auto-conversion in CS 4. Is this possible? If not, it really should be a preference option. I code a lot of HTML emails and it is very time consuming to convert every curly quote and dash.
Thanks,
Robert
Digital Arts

I too am having a related problem with Dreamweaver CS5 (running under Windows XP), having just upgraded from CS4 (which works fine for me) this week.
In my case, I like to convert to typographic quotes etc. in my text editor, where I can use macros I've written to speed the conversion process. So my preferred method is to key in typographic letters & symbols by hand (using ALT + ASCII key codes typed in on the numeric keypad) in my text editor, and then I copy and paste my *plain* ASCII text (no formatting other than line feeds & carriage returns) into DW's DESIGN view. DW displays my high-ASCII characters just fine in DESIGN view, and writes the proper HTML code for the character into the source code (which is where I mostly work in DW).
I've been doing it this way for years (first with GoLive, and then with DW CS4) and never encountered any problems until this week, when I upgraded to DW CS5.
But the problem I'm having may be somewhat different than what others have complained of here.
In my case, some high-ASCII (above 128) characters convert to HTML just fine, while others do not.
E.g., en and em dashes in my cut-and-paste text show as such in DESIGN mode, and the right entries
    –
    —
turn up in the source code. Same is true for the ampersand
    &
and the copyright symbol
    ©
and for such foreign letters as the e with acute accent (ALT+0233)
    é
What does NOT display or code correctly are the typographic quotes. E.g., when I paste in (or special paste; it doesn't seem to make any difference which I use for this) text with typographic double quotes (ALT+0147 for open quote mark and ALT+0148 for close quote mark), which should appear in source code as
    “[...]”
DW strips out the ASCII encoding, displaying the inch marks in DESIGN mode, and putting this
    "[...]"
in my source code.
The typographic apostrophe (ALT+0146) is treated differently still. The text I copy & paste into DW should appear as
    [...]’[...]
in the source code, but instead I get the foot mark (both in DESIGN and CODE views):
I've tried adjusting the various DW settings for "encoding"
    MODIFY > PAGE PROPERTIES > TITLE/ENCODING > Encoding:
and for fonts
    EDIT > PREFERENCES > FONTS
but switching from "Unicode (UTF-8)" to "Western European" hasn't solved the problem (probably because in my case many of the higher ASCII characters convert just fine). So I don't think it's the encoding scheme I use that's the problem.
Whatever the problem is, it's caused me enough headaches and time lost troubleshooting that I'm planning to revert to CS4 as soon as I post this.
Deborah

Free Goods Import Process with Customs, Freight, and Other Taxes.

hi,
I have to import free goods but have to pay for Customs, Freight, and other Taxes.
1. If I tick Free Goods Indicator in PO Line Item, Condition Tab at line item disappears. It will not to calculate other conditions at Header level also. - So I cant execute this option.
2. If i take price of material and insert Condition Type: R001:Discount/Quantity with material price/qty, then it gives Error Message - "Price Must be greater than 0".
So, Is there any way through which I can procure Free Goods and can maintain conditions for Customs, Freight, and other Taxes in Purchase Order.
Please help me in this regard.
- Jignesh

Hi,
1) Create an import PO in ME21N with material price and all custom duty conditions (as you normally create). no need to put free tick indicator.
2) Process MIRO for goods and delivery costs simultaneously.
3) Maintain zero amount for goods item and actual values for the duties (Ensure selection of goods item including delivery cost items)
4) Save the LIV document
5) Check PO item history got updated with IR-L and DCIn. (IR-L will updated with zero amount)
6) Do MIGO w.r.t. IR document number.
7) GR FI document will get updated with the non-set off duty values only.
Regards
Rajesh

Failed Hardware Scan and other issues E440

Hi all,
This is probably more rant than anything, but I wanted to give a heads up to others too.
I have a ThinkPad E440 that is a year old. From the very first time I turned it on, there have been issues. The first hardware scan (via Lenovo Solution Center - LSC) showed a warning for the Intel Dual Band Wireless-AC 7260 Local Connection Test. There were also tons of System Events that always show up in the "Configuration History" part of the LSC. You can look at the calendar and tell exactly which days I used the computer because there will be System Events generated each day. Things like app crashes and failed drivers.
In July 2014, I got the first warning for the 16 GB SSD - the SMART Short Self-Test. By February this year it showed as failed for each hardware scan (these were initially set up to run monthly).
Also the whole time I've had it the touch screen would just stop working at some point and I would have to reboot to get it working again.
I finally called Lenovo on March 30th, before my warranty expired. When I called that time, I didn't realize the hard drive failure was the SSD. So they sent me a new 500 GB drive. I also added the other things into the case when I talked to them. For the wireless issue they suggested making sure the driver was up to date. I did this and let them know when I called back that it was up to date and still having the warning. So I called them to tell them to tell them about the wireless and also that I realized it was the SSD having the failure, not the main drive. The first case had already been closed even though none of the other items were addressed.
So they opened another case (this is #2). They said to mail them the laptop since the wireless issue would probably be on the board and it wasn't something I could fix myself. They sent a box with a prepaid overnight shipping label. I was very sick for a few days so I sent it back to them on April 10th (a Friday). Via UPS I saw it was delivered on Saturday. Work was performed on it Monday, April 13th and sent back to me that very day. I received it on April 14th. This part of the service has been excellent - very fast response.
Being in IT, I included a letter with the laptop that outlined the issues that should have been in the case. I also printed the hardware scans and what the system events looked like.
When I got the laptop back, the sheet inside said they had replaced the Speaker because of Distorted Sound. This was not even on the list even though I had noticed it. I didn't even power up the laptop before calling them again - yes, I was furious! Plus our power was out...
So this was noon on the 14th. They opened case #3 and sent me ANOTHER BOX so I could send it back.
After our power came back on the 15th, I powered up my laptop. I opened the browser (I have it set to restore the previous session) and there was a sexually explicit video on YouTube. I opened the other browser and there was a different video on YouTube. So this person was watching YouTube instead of fixing my laptop. I looked through both browser histories and there was quite a bit of activity while my laptop was at the repair center... I ran the hardware scan - still failed and a warning for the wireless. They really hadn't done anything.
I also found two pictures of the repair person in the recycle bin...
So I called back. I was LIVID! They opened another case (this is #4). And sent me ANOTHER BOX. I finally learned the other day that once a case is opened, it cannot be edited or added to at all. Instead, they close the other case and open a new one. I guess their turnaround time for closing cases is excellent! I've never seen a system like that - and I've used a lot of them.
I got a really nice, patient fellow on the line. He took all my info (again). I emailed him the pictures, screen captures of the YouTube videos, the letter I had sent - everything. He entered as much into the new case as he could - he talked to one of the supervisors to make sure he did it right. Somehow he flagged it so that the laptop would get more attention (time) at the repair facility. He also opened a separate case (an escalation ticket?) for a supervisor to call me regarding the person's conduct at the repair facility. He said they would call me that day. (It's now the 25th and I've never heard from anyone)
So, he sent me ANOTHER BOX. I've built up quite a stack of them.
Our power was out AGAIN from the 17th through the 19th (don't get me started).
I noticed a hardware scan had now gotten a failure on the main hard drive. So I called them on the 21st to add this to the case before sending the laptop back. The girl said they can't add anything to an existing case or edit it at all once it's opened. She would have to open a new case and SEND ME ANOTHER BOX. I told her to forget it because I was ready to send it in and didn't want to wait for another box. I also asked for a status on that "escalation case" where the supervisor was supposed to call me. In order to do this she, yes, wait for it, had to open ANOTHER CASE!! So they would know I wanted a status. I'm completely dumbfounded.
So I sent it back on the 21st. This time I practically wiped it. I had already removed all my files the last time, but I had left my bookmarks and browser history intact. I set up a guest logon with admin privileges. I updated my letter and printed off more stuff to include with the box. On one sheet I had only the case number, the serial number and machine type. On another sheet I had "DO NOT SEPARATE THIS PAPERWORK FROM THE LAPTOP" and the case number. I put this sheet on top (The guy on the 15th said my letter and stuff may have gotten separated from the laptop once it was delivered to the repair facility). I used a ton of staples so it would all stay together. I included in my letter the failure on the main hard drive and asked if they could look at it. I wrote about having to open a new case if I wanted to include it.
They received it on the 22nd. A nice gentleman from the repair facility called me that day asking about the password. that. was. written. on the sheet they have you fill out. I told him what happened last time and also mentioned the hard drive failure and asked if he could look into it. He said they would.
I received my laptop back yesterday morning.The sheet that came with it said they had "replaced the following parts to complete the repair of your laptop."
Part Description                                           Symptom
IMAGE                                                             Replaced due to engineering change
System board                                                 Network card error
Hard disk drive                                                Network card error
ECA-WIRELESS                                            <no symptom listed>
There was also a sheet saying they had installed a factory preload of software and I needed to install Lenovo and Windows updates.
When I booted it up, the first thing I noticed, in the lower right corner was:
Windows 8.1
SecureBoot isn’t configured correctly
Build 9600
I ran a hardware scan. Well, I tried. It stopped part way through and said it finished successfully but most of the tasks showed up as cancelled. I tried to run it again - issues - rebooting ensued. It said the LSC wasn’t available and that I should try again or reboot.
Tried several times. Then got what I guess is the new BSOD - kinder, gentler:
Your PC ran into a problem and needs to restart. We're just
collecting some error info, and then we'll restart for you. (xx% complete)
If you'd like to know more, you can search online later for this error: DRIVER_CORRUPTED_EXPOOL
Even though the LSC said my Lenovo files were all up to date, I ran the Update. And first I had to download a new version of Update. Then I downloaded all of the Lenovo updates and installed them (there were quite a few). The BIOS update failed. While I was doing the Lenovo downloads, I got a light blue screen but no text (I was out of the room so I'm not sure what happened). Did CTRL-ALT-DEL and it shows only IE and Task Manager as applications that are running. Could not “Switch to” IE. Hitting window key to go to start didn't do anything. So I had to restart.
By 3pm yesterday there were 34 system events in the configuration history.
I ran the hardware scan again after I updated the Lenovo files, and you guessed it! Failure on the SSD (SMART Short Self-Test) and warning on the wireless. Nothing had changed. Except hardware scan is acting different than it did before I sent in the laptop for repairs. When it finishes, it instantly closes and just shows 100% complete. When I click on "see last results" it shows a screen called
Log Information,
Canceled 04/24/2015 n:nn pm
You have not done a hardware test on your computer
And the calendar in LSC only shows the very first hardware scan I did on Friday. Even the hardware scan screen shows the date and time of the last scan. It also shows the error code. In order to see exactly what is failing, I have to sit there and watch it very closely and snap a picture of the screen as soon as the error (or warning) shows up.
When I would try to run Windows update, it would hang up PC Settings. I couldn't even kill it using task manager because it didn't show up as a task. During this, I got a flag saying the firewall wasn't turned on. I tried to turn it on, but clicking on Turn on Windows Firewall didn't do anything. I tried to setup my Microsoft account but that just hung too.
I ended up running Windows Update FOUR TIMES to get all the updates installed. Every time I ran it, it said "Done!" and I would run it again and more would show up. The last time was this morning.
At some point, the error about SecureBoot went away.
Then, I created a bootable BIOS update disk. Following the ReadMe instructions, I went through ThinkPad Setup and verified several values. Of note:
Secure Boot was DISABLED. According to the ReadMe file, this should be ENABLED in Windows 8.1. I enabled it.
Under Startup/Boot, according to the ReadMe that came with the BIOS update, UEFI/Legacy Boot is supposed to be set at UEFI Only for Windows 8.1. Mine was set to "Both". I changed it.
In Startup, OS Optimized Defaults was DISABLED, even though it says right there (and in the BIOS update ReadMe) it should be ENABLED to meet Microsoft Windows 8 Certification Requirement.
After these updates, I flashed the new BIOS.
Then, I ran hardware scan again...
Now I have TWO failures on the SSD: Random Seek Test and SMART Short Self-Test. Great.
In the Event Viewer (that I recently discovered), it says my disk has a bad block. It just says The device, \Device\Harddisk\DR1, has a bad block. I assume this is the SSD...
There are 867 events in the event viewer - Critical, Error, and Warning...
Fifty-two of these are from October 7, 2013 - before my little laptop was a glimmer.
The rest are from when Lenovo had it and yesterday and today.
64 of them are the disk error.
341 are from DeviceSetupManager. 65 of those are from failed driver installs. 69 are for not being able to establish a connection to the windows update service. 64 are from not being able to establish a connection to the Windows Metadata and Internet Services (WMIS).
3 times it's rebooted without cleanly shutting down
60 of them are from Service Control Manager and say The TDKLIB service failed to start due to the following error: The system cannot find the file specified.
One of them says {Registry Hive Recovered} Registry hive (file): '\??\C:\Users\Default\NTUSER.DAT' was corrupted and it has been recovered. Some data might have been lost.
16 are warnings that various processors in Group 0 are being limited by system firmware.
12 say the certificate for local system with thumbprint <bunch of hex numbers> is about to expire or already expired.
108 are warnings for failure to load the driver \Driver\WUDFRd for various devices
16 are application errors
One is for the computer rebooting from a "bug check"
15 are for name resolutions timing out after none of the configured DNS servers responded.
10 are for SecureBoot being disabled.
14 for services terminating unexpectedly
15 are for WLAN Extensibility Module has stopped
61 are for applications not being able to be restarted because the application SID does not match Conductor SID
12 are for activation of CLSID timing out waiting for the service wuauserv to stop
So, I'll call them on Monday and open. a. new. case (#5?) - but really 7. And get A NEW BOX.
I'll keep you updated!

Hi amycdero and welcome to the HP Forum,
I understand that you are having scanning and printing issues after upgrading to Mavericks OS X v10.9.1. I will try my best to help you resolve this issue.
In this document for Mac OS X: Scanning Software Does Not Open or Stops Responding are steps the may help you with your scanning issue.
This document for Fixing Ink Streaks, Faded Prints, and Other Common Print Quality Problems should help with the streaking printing issue.
I hope this information is helpful. Please let me know.
Thank you,
I worked on behalf of HP.

After updating to Firefox 7.0.1, menu bar for Google,yahoo, Facebook (message,notification,profile,home) and others site are disabled. How can solve this problem?

after updating to Firefox 7.0.1, menu bar for Google(web ,image,video,map etc),yahoo, Facebook (message,notification,profile,home) and others site are disabled. even I cant log out from different sites cz the log out bar is completely disabled. I tried with Firefox 4;5 and 6, same problem exist . I tried by active all add ons for facebook, same problem exist. If I use internet explorer , I don't find such problem with it.
How can I solve this problem?

Thanks a lot for your swift response. And sorry if it was a bit too hectic to go through my detailed query (which I did because it was misunderstood when I asked previously). As I've mentioned above, I was informed that updating to 5.0.1 would '''require''' me to '''delete''' the current version and then install the new one. And doing so will involve losing all my bookmarks. I guess I should have been more specific and detailed there. By losing, I didn't mean losing them forever. I'm aware that they're secured in some place and deleting and installing the software doesn't harm its existence. What I meant that if I install the new version, I'd have to delete the old one. And after installing the new version, I'd have to transfer them (bookmarks) back from wherever they are. Get it? When it updated from 3.6.9 to 3.6.13, and from 3.6.13 to 3.6.18, I didn't need to follow that process. They were already present on their own.
BTW, I'm having no problems with 3.6.18 but after learning about the existence of version 5.0.1, I'm a bit too eager to lay my hands over it.
Thanks for your help; hope this wasn't extremely long.

Why did my index.htm file generate blank? and other weirdness.

Here's the story. Maybe someone can tell me where I made my mistake, or what happened. I'm numbering the steps for convenience in discussing this.
1) I started a new project, a WebHelp project.
2) I imported content in Word.
3) I created an index, glossary, and TOC. I used wizards for some of this.
4) I created a style sheet and applied it to all the topics.
5) I added a skin from the gallery.
6) I generated output.
Then I sent that output to the UI developer on my project. He plugged it in to the web app, and it seemed to work fine. So then:
7) I opened the project, edited the text, and removed glossary links (because I didn't like how they were working) individually.
8) I generated a new TOC to match the changed topic structure (minor changes).
9) I generated another output.
I sent that output to the UI developer and he said it was blank. I opened index.htm and sure enough, it was indeed blank. In fact, it was Zero KB. I also noticed that four other files were blank: whfform.htm, whform.js, whskin_plist.htm, and whtbar.js.
So then I decided to start over. I created a new project, imported just the html topic files from the old project, redid the index (in a hasty and less thorough manner), decided to bail on the glossary for now, did a TOC and sent that to the developer.
Now the Search pane is totally wonky, showing a list of characters and terms.
So I am getting frustrated. The developer has tried monkeying around with stuff on his end, but it's not working. So he says, why don't you send me a build with everything?
The problem is, I have two broken builds. The first one, which for whatever reason has the blank index.htm file (and other blank files), and the second one, which has no glossary, a messy index, and a screwed up search.
I can't seem to find anyone else having this problem. :-/ Can someone help?
Thanks so much,
Tamarleigh

I am having the exact same problem, and I think I've figured out what is happening here. There is an issue when mapping Word styles into RH. The person who setup our Word template included a sidehead with conditional text to hide instructor notes when printing participant training manuals. I removed the conditional text, and everything is working fine. You may want to double check to make sure you don't have conditional text in your Word docs. I've uploaded an image with the code below to show how the conditional text looked when the document was linked and generated.
Check out the code below:
<table cellspacing="0">
          <tr>
                    <td style="vertical-align: top; padding-left: 0px; padding-top: 0px;
                               padding-right: 0px; padding-bottom: 0px;" height="800" width="114"><table
                               cellspacing="0" width="100%">
                              <tr>
                                        <td style="padding-left: 0px; padding-top: 0px; padding-right: 0px;
                                                   padding-bottom: 0px;"><div v:shape="Text_x0020_Box_x0020_146"
                                                                                                                         class="shape" style="padding: 3.6pt 7.2pt 3.6pt 7.2pt;">
                                                  <p class="WD_InstructorNotesHeading"><span style="background: #ffff00;">Instructor
                                                   Notes:</span></p>
                                                  <p class="WD_InstructorNotesText"><span style="background: #ffff00;">Add
                                                   any additional instructor information into this text
                                                   box.  It will only appear when hidden text
                                                   is turned on.</span></p>
                                                  <p class="WD_InstructorNotesText"> </p>
                                        </div></td>
                              </tr>
                    </table>
                     </td>
          </tr>
</table>
Cheers.

App Store, Pages 5.0, Evernote, and other Apps will not fully function after installing Mavericks. What is the issue and how can this be solved?

Hello all, I could use some serious help on some major issues I have been having after installing Mavericks on my system (specs stated below). Never has a mac felt ever so rebelious and broken before in my lifelong period of using these systems. Anyway, after installing system 10.9, I had opened the mac App Store upon seeing that applications such as my iWork suite all had free updates. However, when I would attempt to navigate to the updates window, it would not respond to my various attempts. I then tried to get there by the system's menu bar and to my dismay, nothing would work when I clicked on it, not even the apple logo menu. I later quit the application using Command-Q and opened up the App Store by the apple menu option 'Software Update...' instead. Though it looked promising since the updates window did open, all update buttons or even '...more' info buttons were unresponsive. These same problems persisted even after restarting my computer. I had also attempted to see if repairing definitions would help by booting from the recovery start-disk and using disk utility but the repairs it carried out apparently had nothing to do with my issue. Finally, I was able to update to the new iWorks suite (which interestingly did not replace the iWorks '09 suite) by following the notification that asked about allowing automatic updates which I did.
Once trying to use Pages 5.0, I soon noticed that all I could do was merely type in a new document and change various options via key commands. Neither the inspector or top bar menus would respond to any place I click. Similarly, Evernote only starts up on the last used note and merely allows me to scroll through it. The top bar menus, the note select pane, and even clicking inside the note to input text are all not functioning and uninfluenced by any mouse clicks.
I have noticed other apps that will not respond to any sort of input, but I still have not explored all applications to know what the issues of each may be. However there are some applications that work such as Safari, Google Chrome, dolphin, iWork '09 including Pages '09, and others.
I do hope that I can avoid rolling back my system, but in the meantime, it has been quite the obticle course to use my computer for all of my school purposes.
Any help is very much appreciated,
Thank you!
DT
MacBook Pro 13-inch, Mid 2009
Processor 2.26 GHz Intel Core 2 Duo
Memory 4 GB 1067 MHz DDR3
Graphics NVIDIA GeForce 9400M 256 MB

I also forgot to note that this problem also persists with the new iBooks application. I cannot get past the 'Get Started' screen or access the iBooks Store. Again, all top bar menus are unresponsive.
DT

How do I transfer my MacBook Air to my wife so she can sync her iTunes account and other settings with her iPad Mini?

How do I transfer my MacBook Air to my wife so she can sync her iTunes account and other settings with her iPad Mini?

You can change the account shortname to whatever you wish to use.
As you can see from my example above. Once you click on the Create User button a new account will be created.
She will need to get her own Apple ID setup so when she starts with iTunes she can open her own iTunes account unless you both want to share the use of the same Apple ID. This can create a bit of confusion if you have your own iPads or iPhones or iPods. As you have discovered it's pretty much one iDevice with one Apple ID.
As for the iTunes library that becomes a more complicated issue.

G4mx440 d3d and other probs..

Similar Messages

Maybe you are looking for