G4MX460 VTP Capture - white bar on screen - ( capturing rectangle stri

Hi everyone,
Sorry for my bad english.
When capturing video with MX460VTP, the preview screen shows the video nicely, but the saved file (don't matters if it is mpeg or avi) has a white bar covering the vertical middle of screen, from left to right, like this:
VIDEOVIDEOVIDEO
VIDEOVIDEOVIDEO
WHITE BAR
VIDEOVIDEOVIDEO
VIDEOVIDEOVIDEO
Sometimes video starts good and 4 seconds later, the bar appears. Others, it is there in entire video.
I updated video (30.00) e capture (1.1.6, or Capture3a) dirvers, motherboard BIOS, motherboard drivers, but nothing helps.
My system:
Motherboard Gigabyte GA-7ZXR
Duron 700 processor
256MB ram PC-133
HD UDMA 66
Win XP
DirectX 8.1
Using WinProducer/WinCoder 2.0
Can anybody help, please? I'm going nutz!

hey, i have the same problem.
i'm trying to capture from my toshiba dvd player and all i get is sharp picture on the top, and bottom. but right in the middle is a big fat white bar covering it up. can someone help me?
thanks

Similar Messages

Albook G4 Display Has White Bar Bottom Screen

Hello all:
My Albook G4 display has a white bar on the bottom third of the screen. Last year I followed these steps to fix tighten the hinges: http://macintoshhowto.com/hardware/how-to-fix-a-loose-hinge-on-an-aluminium-powe rbook.html
and I'm guessing I may have damaged, loosend or otherwise screwed up the connections. Any suggestions? TIA!

Thanks for your reply. Not quite sure when the issue started (my daughter's machine) but I think its been progressing for several months.
Before your reply, I was thinking hardware (monitor cable) but at your suggestion I ran TechTools - no issues. I also checked and repaired permissions, ran the fsck -fy in single user mode, and changed the desktop picture and screen saver options. It seemed to have cleared up, but when I adjust the screen position (open or close) the same area briefly acts up. I still think it may be a connector or cable issue, but there obviously was some sort of software issues too, so thanks for your suggestion. Is there a tutorial on how to check the screen connections that you would recommend? Thanks again!

Flickering white bars across screen

my friend's daughter's 4th generation touch went from operating normally to racing/static like white bars across the screen.
touch pad still responded - we tried to restart as well as restore to factory setting with no improvement
now when trying to start up from restore screen freezes, with white bars, on location enable question.
please help

When restoring to factory defaults/new iPod fails to solve the problem thne you likely ahve an hardware problem and an appointment at the Genius Bar of an Apple store is in order or acll AppleCare if under warranty.

CRASH REPORT Product: Adobe Photoshop CC Application running on: Apple iMac 3.5GHz / Mavericks 10.9.2 Application crashes without warning. . Symptom: Drop down boxes go blank white (I shot screen captures of blank drop down boxes) and application

CRASH REPORT
Product: Adobe Photoshop CC
Application running on:
Apple iMac 3.5GHz late 2013 / Mavericks 10.9.2
Application crashes without warning. Symptom: Drop down boxes go blank white (I shot screen captures of blank drop down boxes) and application stops working, actions for appox. 10 minutes preceding crash are lost. Force Quit required to quit unresponsive / frozen application and then Restart of Adobe Photoshop CC
Crash Frequency: Three time in this work day, 5.6.14 Once a day sporadically (approximately 10 times) in past two weeks.
Other applications running at time of crashes: Adobe Bridge - NOT effected. Computer was on line with no browsers open.
Otherwise computer continued to operate normally.
I have been using Adobe Photoshop CC for approximately two months.

Thanks, Chris,
I hope that this is the solution.
re: "And a crash report without an actual crash report (a long, detailed text document available from the crash report dialog), is not all that useful" :
I did in deed submit a homemade crash report.
I would have submitted "an actual Crash Report " and sooner, but: When this event occurs. there are NO dialog boxes. All frozen / blank. No possibility of "actual crash report" !
Thank you!

Capture white bar solved- mine anyway

In case anyone else is wasting alot of time by looking at all the threads that dont really say what works, I got the WMD1.08 driver from the link from another post:
( http://ftp://download1.nvidia.com/Windows/23.11/WDM_1.08.exe )
and it fixed the white bar problem. It self extracts and installs, and after restarting I didnt have any problems with the white bar when transferring from VHS to the computer. I am using Nvidia FX 5600 and XP home and MSI KT3 ultra board. I am using it for home/recorded videos.
I wanted to post a this to actually help someone and not have to go thru a bunch of replies to someone's question while noone actually says that they tried it and if it worked or not.
I did reinstall my updated video drivers which DIDNT affect the capture drvers, but be careful and save the Navcap.sys and .inf files somewhere to be sure the 1.08 works.

:O X( I'm trying to capture my home videos off of my sharp hi8 video camera.
I'd like to know how the F*&$%ers at Macrovision found a way to copyright my family reuion!
If I ever meet one of them I'm going to tear him a new a**hole
and the other thing is why do I have to spend over a week trying to find what the problem was and now spend more money (of course what the f*@% was I thinking) to fix something that shouldnt even be there.
I'm going to leave a message with MSI and if I don't have an answer by tomorrow evening when I log on again, someone is going to get a video card inserted in a slot they never expected
By the way. I did a search of this forum and other than going back to an old driver(which i spent the last 3 hours of my life that I'll never get back) which didn't work NO ONE HAS SATISFACTORILY ANSWERED THIS QUESTION!
What happened to the other guys did they give up?

Error 10 - Nvidia WDM Video Capture (universal) - MSI G4MX460-VTP

hi
I have
G4MX460-VTP - driver 4403
Intel D850MV2
Windows XP
In the Hardware Administrator show the exclamation icon (!) in the Nvidia WDM Video Capture(Universal)
I reinstall the driver origial from Cd and resolve this....but whe resstart the pc, show the exclamation icon again....
please help me
thanks
Jorge
PD. When download the last WDM driver for G4MX460-VTP¿?

This is a image of error...please help me

White bar across video capture

After extensive searching across this most amazing forum (I'm bookmarking this and I'll be back (with austrian accent)) I found something close to my problem.
After updating my system with all the latest drivers I still have a problem with video capture from my camcorder. I can get the capture to work fine but it shows a horizontal white bar across the replay. I thought it might have been some kind of censor algorithm as it was of a naughty video of my wife and I but after tryin 8 different capture programs and installing and reinstalling trying other very tame family videos the white bar would appear and disappear randomly no matter what I captured.
In a post from Ayrsayle at the end of which he said
"One last hint: The 1.12 drivers and up have Macrovision built in so if you copy commercial tapes or DVDs you'll get a white bar across the image. It can be fixed this way:
Get a copy of the 1.08 drivers (you can web search for them). Extract 1.08 drivers to a new folder, and replace Nvcap.sys and Nvcap.inf *only* in the Windows directories(do file find on C:/windows to locate them) with the 1.08 versions. Reboot. Problem solved. I just found this tonight.
I hope some of this helps, I've had to tear my hair out as well over the past month upon getting this card! "
Well my problem is it's not a commercial video I'm capturing (Well at least not yet!).
My other problem is I'm having trouble locating the past drivers.
Can anybody help me?
Thanks
James :(

:O X( I'm trying to capture my home videos off of my sharp hi8 video camera.
I'd like to know how the F*&$%ers at Macrovision found a way to copyright my family reuion!
If I ever meet one of them I'm going to tear him a new a**hole
and the other thing is why do I have to spend over a week trying to find what the problem was and now spend more money (of course what the f*@% was I thinking) to fix something that shouldnt even be there.
I'm going to leave a message with MSI and if I don't have an answer by tomorrow evening when I log on again, someone is going to get a video card inserted in a slot they never expected
By the way. I did a search of this forum and other than going back to an old driver(which i spent the last 3 hours of my life that I'll never get back) which didn't work NO ONE HAS SATISFACTORILY ANSWERED THIS QUESTION!
What happened to the other guys did they give up?

Imac late 2006 has two big white bars on the screen.

Hello,
I have a late 2006 intel imac and it also has the apparently extremely common vertical white bars on the screen.
They have the same size, about a twelveth of the whole screen, and are spaced by a well functioning bar of exactly the same size. So i thought this could be a problem with the connectors, and i wondered, is there any connector inside the imac that has 12 pins?
P.S.: I'm trying to fix this myself because i took it to an apple authorized repair center (which is the closest we have in Portugal to a real Apple repair center), and they said it would be 550€, a ridiculous amount of money, since the screen costs something like 150€, and they ended up charging me 50€ just for letting it stay the night since they didn't even open it.
I have been an extremely loyal customer and am extremely disappointed in Apple for not replacing this screens for free, since it's clearly a manufacturing problem.

You are just better off saving up your money to buy a new iMac.
Late 2006 iMac graphics problem, system freezes
http://www.youtube.com/watch?v=3j-tZ_v1aCc <<< click here.

HT4623 My Iphone 4s just stopped during the latest update and now the screen show the Apple icon and an white bar beneath. I can no longer get anything to work on the phone!! Where to from here??

My Iphone 4s just stopped during the latest update and now the screen show the Apple icon and an white bar beneath. I can no longer get anything to work on the phone!! Where to from here??

You can not merge accounts.
Apps are tied to the Apple ID used to download them, you can not transfer them.

Windows 7 bootcamp show black screen with a small white bar

I just upgraded my iMac mid 2011 21.5" with a crucial m4 SSD. The SSD is plugged in the disk 1 DATA port and on the SSD power on the motherboard. I fully installed Windows 7 with all the driver and updates. My mac is upgraded with the lastest update. The crucial m4 firmware is 009. I installed no driver for the SSD.
The problem is that when I start my bootcamp it only show a black screen with a small white bar on the corner. I waited about 5 minutes before to close the computer manually. The only way my bootcamp work is when I put my Windows 7 DVD in the reader for the startup.

Sometimes windows installation will install a WDM driver for ati or nvidia. It causes the screen to go black altho ugh everything else is running in the background. I found that using an external monitor will allow you to see the screen so that you can install the lastest bootcamp drivers. After the drivers are installed the screen comes back. I reinstalled windows 3 times and tried all other solutions including repairing the hard drive in disk utility.

White bar shows at the top of the screen when dvd played on a mac.

Hi,
I am using DVDSP 3. When I play the dvd on a mac there is a white bar at the top of the screen saying the marker names. If I watch the same dvd on the dvd player hooked up with my tv, it plays fine and does not show any extra area the white bar at the top. Is there any way I can prevent this from happening?

Do worry about it. It sounds like you have coded with the "text track" of the .mov file left superimposed onto the pictures. If you open your original .mov in Quicktime, you can turn off the text track. Then save a reference Quicktime file, and then use this to make your .mp2. Alternatively, change your marker settings when you do a FCP playout (assuming you are using FCP) - turn off the marker export; or make sure that you have chosen compatible settings for your version of DVD SP3. Also, you can write down the timecodes, and put your Chapter markers into DVD SP3 by hand.

Black and white bar screen x230

Since recently my laptop shows a big black and white bar after booting. After applying a little force to the screen i get different colorsLike so:
And after applying some more force, not too roughly of course, it is all fine again. However im afraid that after a while it will not be fixable by a little force anymore. I did not drop the laptop to cause this and have never taken the screen appart.
Is this something i can fix? should i send the laptop for warranty? (still have a year or so left)?

Seems the culprit is a damaged cable from systemboard to the screen or connector between them. I know about the such issues with x220 that has similar design and the same screen models.
To attempt resolve an issue you should disassemble keyboard, remove the screen bezel and get access to the entire cable (inside of the hinges including) and connector. Then have a look at them closely, probably you'll find some defect.
Or contact with warranty service.
x220 | i5-2520m | Intel ssd 320 series | Gobi 2000 3G GPS | WiFi
x220 | i5-2520m | hdd 320 | Intel msata ssd 310 series | 3G GPS | WiFi
Do it well, worse becomes itself
Русскоязычное Сообщество English Community Deutsche Community Comunidad en Español

My Iphone 5 has white bars on top of my screen and i sometimes

My iphone 5 keeps coming up with white bars on top of the screen and i sometimes can't even control my phone. It goes al crazy when the white bars show. These bars fade in then out all the time. HELP pleeeeeeease

The Basic Troubleshooting Steps are:
Restart... Reset... Restore from Backup... Restore as New...
Restart / Reset > http://support.apple.com/kb/ht1430
Backing up, Updating and Restoring > http://support.apple.com/kb/HT1414
If you try all these Steps and you still have issues... Then a Visit to an Apple Store or AASP (Authorized Apple Service Provider) is the Next Step... Be sure to make an appointment first...

Faded screen and white bars when waking from sleep on mac mini

I just bought a new mac mini. It is the late 2012 version with Mavericks.
When I wake it from sleep, my screen is blurred out and there is a row of little white bars at the bottom for probably 10 seconds before the full screen comes on.
Why is it doing this? Is that normal?
Thanks

Late-model Macs are configured to enter standby after four hours in sleep while on AC power, in order to comply with a directive of the European Union.
You have three choices. One is to do nothing. Use the machine as designed. That's what I recommend.
The second choice is to disable Power Nap in the Energy Saver pane of System Preferences. Uncheck the box marked Enable Power Nap... in each of the tabs. You won't get the wake delay anymore, but you won't get any of the features of Power Nap either.
The third choice is to increase the delay before standby mode is triggered, or to disable standby mode completely. This is an unsupported option and you're on your own as to the consequences. If you choose to go this route, proceed as below. These instructions are for advanced users only.
Back up all data before making any changes.
These instructions must be carried out as an administrator. If you have only one user account, you are the administrator.
Drag across the line below to select it, then copy it to the Clipboard by pressing the key combination command-C:
sudo pmset –a standbydelay
Don't copy the blank space at the end of the line.
Launch the Terminal application.
Paste into the Terminal window by pressing command-V. Press the space bar, then type the delay you want, in seconds. For example, if you want to change the standby delay from the default one hour to eight hours, enter 28800. Don't put commas or other punctuation marks in the number. To disable standby, enter 0 (zero.)
When the command is complete, press return. You'll be prompted for your login password. Nothing will be displayed when you type it. Type carefully and then press return. You may get a one-time warning to be careful. If you don’t have a login password, you’ll need to set one before you can run the command. After running it, quit Terminal. If you see a message that your username "is not in the sudoers file," then you're not logged in as an administrator.
To disable standby on AC power, enter this command:
sudo pmset autopoweroff 0
and to revert to the default state,
sudo pmset autopoweroff 1

White Bar Across My iPod Nano Screen!! HELP PLEASE!

Theres a thick white bar going horizontally across the screen of my iPod Nano, and I don't know how to get it away. I've restored my iPod, reset it, I don't know what to do. It's driving me crazy! Someone please please PLEASE help me!
It would be easier if you could email me with help: [email protected]
Thank you.
Sarah x

Time to send it back to Apple:iPod Service Request
Regards
Colin R.

G4MX460 VTP Capture - white bar on screen - ( capturing rectangle stri

Similar Messages

Maybe you are looking for