G4Ti4200-TD 128 meg

I hope someone can help...
I have the G4Ti4200-TD 128 meg card, and my problem is when I attempt to run 800x600 resolution. I'm not sure how to describe what happens but it looks like all the rows of pixels rapidly shift back and forth... making images looks like this..
instead of this...
My monitor is a Sony Trinitron Multiscan 200ES 17"
Computer is a Compaq Presario 6010CA w/ Athlon XP 1700+, 512 meg pc2100 ram. it is on an NVIDIA nFORCE mobo (default retail board for 6010CA model)
http://ftp://ftp.compaq.com/pub/supportinformation/consumerdocs/inthebox/275564-001.pdf
I hope someone knows what is going on, and a fix for it... otherwise perhaps someone could direct me to an MSI repair dropoff location in the Oakville Ontario area?
Thanks
Rick

Hi...
Sorry for the delay.
I am running Windows XP Pro, and generally 1024x768 32 bit. However, I have tried just about ever combination under the sun, but when the application (games) run at 800x600, or I set my desktop resolution to 800x600 I get the wacky sqiggles. :(

Similar Messages

Best Browser and OS for G3 Indigo Clamshell w/128 Megs Ram

Hey Everyone,
I am buying an Indigo G3 w/128 megs of ram that's running OS 9.2 and already has some version of MS Office on there. It's never been used on the net at all! All I want to do is e-mail, web surf, and maybe run iTunes. I am also scavenging an airport card from my dead G3 white laptop( Pismo?) and putting that in later, as my girlfriend has a wireless router. Basically, its just a cheap solution as I am working with her at her business and need something inexpensive to work on...that is MAC!
So, my questions are:
1) If I just plug it into an ethernet cable, will it update the firmware?
2) Can I still efficiently use 9.2 with my above described needs( minus iTunes...I know that needs OSX)?
3) What browser could I use and how do I get it if this thing has never been on the net before?
Thanks everyone!

Probably the best browser for OS 9.x is Mozilla. Although Mozilla will have a problem on some web sites that are designed for newer browsers. Download Wamcom's Mozilla browser at: http://wamcom.org/latest-131/ With only 128MB RAM, you need to have a lot of Virtual Memory.
You only need to update the firmware if you are going to install/run OS X.
Although I have Panther installed on my G4, I run in OS 9.2.2 more than Panther.
 Cheers, Tom

ATA 9800 128 Meg Card Vs. OEM Apple ATI 64 Meg Graphics Card?

I'm upgrading a G4 Dual 500 to a Powerlogix Powerforce G4 Dual 1.3 CPU. I'm wondering if an ATI AGP 128 meg graphics card as a replacement to the Apple OEM/ATI 64 meg going to do much for me? Would this push the powersupply too much?
I also have the option of plunking in an ATI 9200 PCI card with 128 meg memory. As you can tell I'm going through my parts bin I'm using a Dell 24" LCD.
Any and all thoughts would be much appreciated!

I was wrong about the ATA 9800, oops it is an ATI 9200. I swapped it for the same card that has 128meg. memory instead of 64meg. X-bench reported little differences in speed.

IMac 20", 128 meg of 256 meg, what does it mean for performance?

I was always a firm believer that generally vram didn't play a huge part in performance, other than it's clock rate obviously, it just allowed you to run higher resolution. I've heard some claim the 256 meg version has a noticeable speed improvement.
Questions are: What is the clock rate of the processor and memory in each version? I'm mainly curious if they are the same, but am also curious if it's the same clock rate as in Intel laptops. I know the Macbook pro is tuned down for battery life from the factory, and have heard rumors the iMac is also.
Other question is, is there a performance difference in gaming at native resolution and lower for the 20" iMac? And if so, how much are we talking? 52fps as opposed to 50fps, or something more substantial?

I have the 256MB vram version and I can tell you that the stock speed of the x1600 is 400mhz core/400 mhz memory. I do not know what the stock speed is of the 128 MB version. The 17", the speeds are closer to 300/300.
Glor

Trouble Formating a new 128 Meg C

I have Nomad II that is a couple of years old with 0 internal memory.
I have a new 28 MB Flash card
I have the latest firmware and am using Windows XP.
When I format the card in the unit it tells me there is only 57.0 megs available and 68.0 megs used but nothing shows on the card.
It will not allow me to download files to the card using the Creative Nomad II Manager.

Thanks in advance for the help.

The very second line of that lengthy report tells you where the app is:
Path: /Applications/Microsoft Office 2011/*/Solver.app/Contents/MacOS/Solver
It's part of MS Office, and probably not meant to be opened directly as you did.

Which is better? Creative Muvo (128 meg) or Creative Nomad Muvo (128 m

Sorry for the newbie question, but I can't seem to find the difference.
I bid on of each and ended up winning both (on eBay). I'm trying to decide which one to keep.
Are they the same thing and just labeled wrong on eBay?
Thanks in advance.
http://cgi.ebay.com/ws/eBayISAPI.dll?ViewItem&item=5782075503&rd=&sspagen ame=STRK%3AMEWN%3AIT&rd=
http://cgi.ebay.com/ws/eBayISAPI.dll?ViewItem&item=57887837&rd=&sspagenam e=STRK%3AMEWN%3AIT&rd=

They should both be USB2.0 (and the capacity is the same), so the only difference is the colour.
Cat

FX5900 128 meg

I just built a new system.
Asus P4C800 deluxe
Mushkin black label 232 1 gig dual channel
IBM Deskstors in raid 0
Thermaltake Xaser III case aluminum with 7 X 80 mm fans
420 watt Thermaltake power with twin fans
Windows XP
SWG and Comand and Conquer Generals both crash causing garbage on the screen and total lock up. I reloaded from scratch multiple times to no avail. I've looked at all the BIOS a great deal but nothing seemed to matter. I swapped my GeForce 4600ti in and it works like a champ with the same driver. So I'm ready to return this card for another unless someone can tell me of known problems with this combination. Deathstalker I'm here from the SWG forum and your post.

I'm not sure if this applies, but have you tried disabling 8X in the BIOS to test?
Have you all the game patches available too? I'm sure you do.
SP1 and DX9?
RAM timings in the BIOS?
How long can you play before this happens?
Oh and what detonator version, and where did you obtain it?

Problem with g3pro 128 graphics card

when i installed a new graphics card i can only get it to work at 1x agp.
i use an ecs k7vza mboard
1gh athlon
i cant change from 1x to 4x even though the motherboard supports it. it is set to 4x in bios.
i cant change the properties from settings. i tried new drivers ,no help please help. im running windows me

Quote
Originally posted by wpro207355
Quote
Originally posted by paazel
they made a geforce 3 with 128mb???
where was I? ?(
they made geforce 3 pro with 128 megs ddr ram

How's it possible my cube has 704 megs of Ram?

I know, I know, I put it there (smiles). I know I bought Ram at one time and added it to the cube.
My question: I can't remember what I added. I thought I may have added 512 megs Ram to what came with my cube, but the math doesn't work out. No matter how I work the math (either my cube had to come with 64 megs or 128 megs, right?) adding 512 to either of those doesn't come to 704 megs of ram? Did I add some odd amount of ram or what?
By the way, how many slots does my cube have for ram (3?)
Other questions: When I look for ram, should I look for ram that is a certain speed? Any other suggestions would be helpful. I know at one time that ram people were buying was iffy and apple even made a program to tell if you bought ram that wasn't working for a Mac (a lot of controversy over this years ago on this forum if anyone remembers).
Any links to where I can get good yet cheap ram would be helpful.

Hi,
Your cube has 3 slots for RAM, numbered J7 (closest to video card), J8 and J9.
Look in System Profiler for Memory, it should tell you the amount and slot it's in.
Actually, when I add 64128512 = 704, at least my calculator says so.
Cube spec's call for 512MB PC100 CL2 168 Pin SDRam 2-2-2, but it's getting hard to find. You can use SDRAM, PC133 • CL=2 • Unbuffered • Non-parity • 133MHz • 3.3V • 64Meg x 64, it is backward compatible.
Places to buy-->
*Omni:
http://www.omnitechnologies.biz/cgi-bin/catalog/cp-app.cgi?usr=51F7450531&rnd=65 41566&rrc=N&affl=C&cip=&act=&aff=&pg=cat&ref=appleg4cube&catstr=
*Crucial:
http://www.crucial.com/store/listparts.asp?Mfr%2BProductline=Apple%2BPowerMac&mfr=Apple&tabid=AM&model=Power+Mac+G4Cube&submit=Go
Normally I'd suggest OWC but they seem to be out of it. Where ever you purchase it, make sure they warranty "Apple Compatible" and have a good refund policy. BTW, Apple says that about everything, it's their way of dodging problems.
Regards,
Dave
QS-1.5GHz, AGP-1.25 GHz, Cube-Dual 1.7 GHz Mac OS X (10.4.3)

K7T Turbo Limited Edition

Ok, i have 3 dimm slots for ram on my Mobo, i had 2 sticks of 128 megs. I just bought a stick of 512. Before this i had no need to use the 3rd slot, now i need to, when trying to use all 3 whenever i put any size of ram in the 3rd my computer will crash once windows is loaded and i try to access any programs. I have no idea what is going on, i tried putting each stick of ram in a dfferent slot to see if any of it was bad, they are all fine. I am running Windows 98se and a Athlon XP1700+
If anyone knows what's goin on please let me know
thnx
Mooji

http://support.microsoft.com/default.aspx?scid=kb;en-us;253912

Video problem??

Hey everyone!
I am a noob here, but have a rather annoying problem...
I just installed an MSI 865pe Neo2 mobo(ms-6728 )and am having huge problems with video. For example; missing blocks and triangles of video and "tears" in the video. I am using a Radeon 9800 Pro, 1024 meg of Kingston DDR400, Western Digital 120 gig EIDE hard drive and a Sound Blaster Audigy Platinum EX sound card. Running Windows XP Home.
Nothing is overclocked and nothing is overheating. I have changed everything I can think of. The original video card was a Radeon 9700 Pro, but I had a warranty and exchanged it for the 9800 Pro, didn't fix the problem.
The original RAM was Corsair TwinX DDR500, changed to Kingston DDR400, didn't fix the problem...
I swapped in a P4 2.66, didn't help so I put the P4 3.0 back in.
I am using a 550 watt psu and the cpu is water cooled and running at 88 degrees F under load. I updated the bios and all drivers. The only changes I made to the defaulted bios settings were to turn off the on-board audio and change the AGP size to 128 meg.
The only thing I can think of is maybe an IRQ problem??? Does this sound right? If so how would I change it?
Any help would be great! Let me know if I missed any info.

Does it happen in the BIOS? Does it happen in Windows? Does it happen in games? Or all three. You may be victim of a serious problem with ATi Radeon cards. Read my following post. It pertains to the P4C800/E/Deluxe boards, but you may find the same results with your setup too as it combines i865/875 and ATi!
http://www.msi.com.tw/program/e_service/forum/index.php?threadid=28414&boardid=10&sid=f250afa38518619a662861a8a173d2f1
Also Check this out as it may pertain to you also:
I may be onto a scam at Fry's electronics or it may be happening on a wider scale. You buy a RETAIL BOXED Radeon9800 Pro 128MB. Take it home and all seems fine. But careful inspection of the part reveals the part number isn't even ATI!!!! It's a part number used for OEM for companies includiong PowerColor and Visiontek.
What's worse is that further inspection of the FCC-ID and BGA memory chips shows that the card is not in fact a 9800 Pro 128, but an SE model that has been force-flashed with the Pro bios. The card is still factory sealed, whatever the hell that means anyway. While there is an ATI logo on the fan and on the board, the board's logo does not represent the POWERED by ACTUAL ATi or BUILT by ATi designation assigned to ALL TRUE ATi cards that are REALLY made by ATi and not 3rd party vendor.
The PN to watch for is 109-A07500-00 While it is a Pro model for Visiontek, it's also the Powercolor 9800 SE card that is masquerading as a 9800 Pro, but is nothing more than a pre-overclocked card using the same ATI flash Utility I have. I flashed the ATi bios with the Powercolor SE bios and the glitches went away! I then returned it and got a different one that had the same part number but had the Visiontek Pro FCC-ID and it works fine with the Pro BIOS.
This may also explain why some aren't able to overclock their 9800 Pro's EVEN with additional cooling as the card is already clocked to it's conceivable limit, as well as possibly explain why some 9800 Pros show severe graphics corruption even with the machine set at defaults with NO overclocking. The card is OEM. But somehow is finding it's way into ATi Retail boxed packages!!! Retail ATI cards use a different part naming heirarchy.

New memory modules possible on MS 6119?

Can someone help me out with this small problem?
I have a MS 6119 motherboard with 64 mb ram. I want to upgrade to 256MB with 2 modules 128MB SDRAM PC133. Is this possible because in the manual it only says PC100 is possible...

I am in the same boat as you. I have a MS-6119 motherboard in which I am using a PC133 SDRAM 128 meg memory stick that works fine. This stick has 8 chips on it. I just purchased an AZENRAM PC133 SDRAM 128 meg memory stick that will only register 64 meg at bootup. This module has only 4 chips and will only run at half it's labeled value. You can run PC133 ram in a PC100 motherboard but, you will need a memory module that has 8 or 16 chips on it to get the full ram value.

Memory Speed Wrong In Cpu-z I have ddr533

Sorry for the double post didnt mean to do that
WELL I finally got my better memory to see how far I can push my prescott but only thing is my memory speed is showing up as pc3200 in cpu-z I am running in dual channel and yes I do have one in each slot (1 and 3). Can any one help on this issuse and what setting do I set it to in the bios auto?any help would be great. and what would be good timings for this memory.

UnderTheSun,
I can run 3-4-3-7 with SPD set manually with PAT=normal(Disable) and read the same on CPUZ using Bios 3.6, are you always get 3-4-4-8 wiht SPD setting manually?
I dont have this problem with FSB above 250 mHz (testing with CC I can reach FSB 261 mHz)
On what FSB did you have CAS set to 2.5 on Bios, since even I set it manually on bios with CAS value 2.5 the CPUZ is always read 3 with PAT=normal(disable).
Funny thing with this mobo CAS value always set to 2.5 if I turn PAT=Fast (Fast, Turbo and Ultra Turbo always have the same memory speed using memtest86+) and the bad things is I loose the CAS value 3 in Bios so I need to reflash the bios.
I cannot change the CAS value to 2.5 with this mobo as shown on the following link,
http://www.anandtech.com/memory/showdoc.html?i=1867
I would like to try OCZ PC3700 Rev.2 EL Gold Edition which in my opinion working best with this 'P' series regarding DOT and manual OCing as shown in the following link,
http://www.anandtech.com/memory/showdoc.html?i=1940
According to OCZ office this DDR is discontinued so I need to find it on the online store and hope can get it.
So finally I think we need to wait for the newer bios of the 'P' series.
Casing Tt Xaser III Skull
M/B 865 PE Neo-2 PFS Platinum Edition Bios Ver.3.6
CPU:P4 2.4C (HT enable) and ThermalTake SubZero 4G
(DOT Rank=Commander,Normal,2395 mHz - 2760 mHz) The PAT/MAT using Bios 3.6 doesn't perform properly.
Memory: Corsair Twinx XMS 4000 pro 2x512 meg (dual-channel dimm 1 and 3).
VGA:WInFAst A360 Ultra TDH(FX 5700 with 128 meg DDRII)
HD:2 SATA Maxtor 80gig and 1 ATA Maxtor 80Gig
CD/RW Yamaha and Pioneer DVD
PSU:ThermalTake Silent PurePower 480W (W0010/Black)
+5 V/40 A, +3.3 V/30 A, +12 V/18 A, -5 V/0.3 A, -12 V/0.8 A, +5 VSB/2 A Peak Load 550 W
Window XP PRO SP1
NEC FP2141SB
Microsoft DesktopPro
Sound Blaster Audigy 2 Platinum + Klipsch Promedia 4.1

No matter what I have tried I still can't get text to show in the webpages

Outside of Safari
HP Pavilion zv6000 Windows XP AMD 64 2.0ghz 2 gig ram 100 gig HD 128 meg video DLdvd+rw
HP Pavilion zv6000 Windows XP AMD 64 2.0ghz 2 gig ram 100 gig HD 128 meg video DLdvd+rw

http://grupenet.com/2007/06/12/fix-font-issue-in-safari-for-windows/
Try the solution on the above page in which the fonts.plist file has tobe downloade and replaced...

Mac OS 8.6 or Restore Disks for iMac G3?

I recently was given an iMac G3 (original tray loading CD-ROM drive).
The original owner took the original harddrive out, and didnt have the original restore disks.
While I was cleaning it I loaded a new blank harddrive in. Now when it turns on it I get a grey screen with a folder icon in the center and a blinking question mark, I assume it's looking for the OS files.
Anyway, what are my options here? Is there files I can download or a CD I can order?
Further, how would I load the OS once I get it? Would it load off the disk automatically or is there a series of keys I'd have to press to start it loading?
Sorry, this is the first Mac anything I've owned, little lone tried to restore.

SPV999 wrote:
I recently was given an iMac G3 (original tray loading CD-ROM drive).
The original owner took the original harddrive out, and didnt have the original restore disks.
What iMac do you have?
Query by serial number
"A serial number is a unique, identifying number or group of numbers and letters assigned to an individual piece of hardware or software. It's used for various things depending on the product / brand but what is your Mac's serial number for and more importantly... what is it hiding and what can it do for you ?"
http://www.appleserialnumberinfo.com/Desktop/index.php
or
http://www.chipmunk.nl/klantenservice/applemodel.html
( hint by K Shaffer )
While I was cleaning it I loaded a new blank harddrive in. Now when it turns on it I get a grey screen with a folder icon in the center and a blinking question mark, I assume it's looking for the OS files.
Yes.
Anyway, what are my options here? Is there files I can download or a CD I can order?
Mac OS 8.x to 10.3. I recommend 10.3. this will give you more of the Mac OS experience. you need 128 meg of memory.
Make certain you can return the memory
Mac OS X is a rather finicky when it comes to working with memory. While some memory sticks manufacturers may claim it meets the Mac OS X requirements, the memory may not work. You cannot tell until you try. From what I've have heard the memory fails immediately.
Open Firmware, boot into Open Firmware.
Power on your iMac while holding down commandoption+of
The first output line contains the firmware level. Mine reads:
Apple PowerMac4,1 4.1.9f1 BootRom built on 09/14/01 at 13.18.04
Copyright 1994-2001 Apple Computer Inc.
What firmware do you need?
http://docs.info.apple.com/article.html?artnum=86117
I believe with a tray loading iMac G3, you can use any level of the firmware. If you decide to load the firmware you will need a version of 8.x Mac OS.
Further, how would I load the OS once I get it? Would it load off the disk automatically or is there a series of keys I'd have to press to start it loading?
Hold down the c key then power on the machine.
The tray loading iMac requires the boot partition to be within 8gig. Since there are hidden partition before the first visible partition, people recommend that you make the first visible partition 7.5 gig to 7.9gig. The machines support upto a 128gig Parallel ATA drive.
Did you set the harddrive to master? Master is a must. Cable select doesn't work. You need to set the hard drive to master mode. There is usually a label on the hard drive that tells you what jumpers you need to set. If you are not sure, give us the name and model number of the hard drive and usually someone will be able to tell you how to set that drive.
Robert

G4Ti4200-TD 128 meg

Similar Messages

Maybe you are looking for