G5 2Ghz Powermac shuts off at power on, unless I hold the button
G5 Dual 2 Ghz, 4 GB RAM ATI X 800 Xt.
Have had it for almost one year, no problems.
Now when I hit the power button to turn it on, it immediately powers off after chime.
However, IF I hold the power button, it will boot to some firmware prompt wherein I must type "mac-boot" and it boots and runs fine.
HELP!!
Many boot-up issues like that can be solved by resetting the SMU. Follow the instructions on this page for resetting the SMU on your Mac:
http://docs.info.apple.com/article.html?artnum=300341
PowerMac G5 Mac OS X (10.4.6) 1GB RAM, nvidia 6800 ultra, Apple 30" Cinema Display
Similar Messages
-
Pavilion dv7-3165dx Notebook shuts off @30% power
I purchased this laptop that I love and runs amazingly but started having a problem when the power isn't plugged in and running on battery. If the power goes down to 30% it just shuts off as if I had been pressing the power button! I checked the corresponding power options and is set to "Do nothing" when power level reaches critical and critical is set to 7%. For some reason the computer just overrides my settings and powers off at 30% charge level. I have left power management to hp recommended settings (Original) and have not tempered with anything else. Any ideas on how to resolve what appears to be a software issue as it is too much of a coincidence that it is precisely at 30% that it powers off and I'm afraid it will shorten the life of my HDD!!!
Now it's happening at 50%!!! It just shuts off at exactly 50% power and am just frustrated out of my mind. I have restored to HP recommended and made sure the pc does nothing if power is under 7%. I am out of iddeas please help
-
Won't boot unless I hold the power button and shuts off after closing
My mac book pro (current gen) shuts off after closing the screen and won't start up unless I hold the power button for about 10 secs.
Any suggestions?Do a SMC and PRAM reset and read this guide
-
My MBA suddenly shut off and after charging, nothing works except the keyboard lights
My MBA suddenly shut off and after charging, nothing works except the keyboard lights. I charged it and it's been hours and no sound, fan, or power chime happens. It also says it's fully charged.
same or similar have to keep trying to reboot- only happens after charging overnight.
-
All of a sudden my Iphone 4 shut off amd will not TURN ON AT ALL. Ive tried everything from holding the buttons to plugging in the usb to a computer and opening my Itunes. I cant get it to turn on...Please anythoughts???
<E-mail Edited by Host>It was a very bad idea to post your email address where millions of people will see it. Expect your spam to increase exponentially, as well as the phishing attempts. It would probably be a good idea to change your password to a really strong one, and, as you have gmail, look into Google's two factor authentication.
For your problem, see: What to do if your iPhone will not turn on -
my ipad 2 shut off and now all I get is the apple logo and a spinning circle
Try holding down the home button and the sleep / wake button at the same time to restart the iPad .
-
My iPOD class (last generation) shuts off when jostled--like what
happens when the headphones come out. Is there any fix for this?I finally resolved my problem after spending way too much time on it. I simply handed my 160GB iPod to my husband to put his fav Stones & Beatles songs on and I went back to my 80GB Microsoft Zune which has never disappointed me.
After spending so much time trying to figure this out I did finally take it back to Apple Store who performed a diagnostic and found there was a problem with the device. They replaced it with a refurbished one which has similar issues. All I wanted to do was listen to my music. Was that too much to ask? So I am happy to be free of this problematic device. No more Apple for me!! -
My macbook pro won't sleep - if I select sleep it does so initially, then the disc-drive appears to kick in and it comes back to life. It also won't turn off (again, the disc-drive kicks in) unless you hold the power-button down for a long period. Help?
Hi a,
Try an SMC Reset: http://support.apple.com/kb/HT3964 -
My iPhone 4s is stuck in AirPlay screen. It won't shut off, software is current, it rings but the screen doesn't change so I can't take any calls. What do I do?
Try:
- Reset the iOS device. Nothing will be lost
Reset iOS device: Hold down the On/Off button and the Home button at the same time for at
least ten seconds, until the Apple logo appears.
- Restore from backup
- Restore to factory settings/new iOS device.
- Make an appointment at the Genius Bar of an Apple store.
Apple Retail Store - Genius Bar
If you have problems restoring (if that is necessary) the iPhone
Try:
- iOS: Not responding or does not turn on
- Also try DFU mode after try recovery mode
How to put iPod touch / iPhone into DFU mode « Karthik's scribblings
- If not successful and you can't fully turn the iPhone fully off, let the battery fully drain. After charging for an least an hour try the above again.
- If still not successful that indicates a hardware problem and an appointment at the Genius Bar of an Apple store is in order.
Apple Retail Store - Genius Bar -
my iphone just shut off and when I put it on the computer dock it says the iphone is in recovery mode
OK. So something went wrong. Restore it and see if it happens again.
-
My MacBook won't turn on ? It's on an updating screen then shuts off when I turn it back on the same things happens again over and over
On the bottom of your MBP is the serial number. Enter it here and post back the model/year information:
https://selfsolve.apple.com/agreementWarrantyDynamic.do
What OSX do you have installed?
Ciao. -
When the system goes into sleep mode it keeps making a beeping noise. The system is shut down by holding the button in
and will then boot up again without any errors.
I Have replace RAMS, Motherboard and Power Supply. I have check the Bio's and Power setting on the unit. there is no place to cause this issue.
Please help
PC Power TechSyamak,
You didn’t specify where the beeping noise is coming from.
If it’s coming through your speakers, you could try to update your audio drivers since it’s possible they’re incorrectly sending a signal to the speakers as the audio chipset enters standby.
If the noise is coming from the motherboard, you’ll need to take a closer look at your system’s configuration or contact the manufacturer.
I hope this helps.
Mike
Windows Outreach Team – IT Pro -
I have a 24 inch early 2008 iMac. To power it on, I have to unplug it, wait 30 seconds, plug it back in, hit the power button, and hold the button for exactly 6 seconds after it starts to whir before releasing it. When I press the power on, unless I hold it for exactly 6 seconds, it abruptly aborts the powering up cycle in a few seconds more. Also, if its been off for a while, even if I unplug it, and plug it back it, it sometimes spontaneously starts the power up cycle, but aborts it in a few seconds. I've had to do this for the last two years. In that interval, has been completely reformatted and restored once . For perhaps one or two weeks, it powered up properly, than reverted to the state described above. The Genius Bar hasn't been able to help. What's up with this?
This could be a software/state problem or a hardware problem. Here are steps to resolve the former.
http://support.apple.com/kb/TS2570
https://discussions.apple.com/docs/DOC-5282 -
my iphone 4 wont turn on. it justr randomnly turned off and i have tried to hold the home and sleep buttons for a minute and also tried to put it into recovery mode but nothing is working?
See Here > http://support.apple.com/kb/HT1808
You may need to try this More than Once...
Be sure to Follow ALL the Steps...
But... if the Device has been Modified... this will Not necessarily work. -
My iPhone 4S won't turn on it's been off for two days now. I tried charging it but it makes a noise every 8 seconds,holding the buttons down and also plugging it to a computer. I need help on what to do or if anybody can tell me what's wrong with my phone
Yes ive tried a different charger and it also nothing shows when i plug it in just makes a noise
Maybe you are looking for
-
Hi , When you run transaction PLM_AUDITMONITOR --> Corrective/Prventive actions --> select one of the corrective/preventive actions and click on audit component it shows a screen which has Actions,Descriptions and view selection , language , Basic da
-
How to implement DC metadata property in KM
Hi all, I have requirement like adding DC metadata property for KM documents. Can any one please help me regarding this. i have followed this document http://dublincore.org/documents/dces/ Regards, Kumar.
-
Ftp Adapter getting invoked more than once
Hello All, I have an FTP polling on a remote server, the options that i chose are archive file after read. The problem is the bpel process is getting invoked more than once. If anyone encountered a similar problem, help is really appreciated. Thanks
-
Invoice report with different currencies
Dear friends, I need a report for invoices. I want to choose currency from selection screen. And report will calculate invoice amount with this currency. Does SAP have a standard report for this? How can I see invoice list with different currency? Th
-
hello Friends , I read some disappointed news on this forum that sun would not continue support for intel edition i donot know it is true of false Any tell me what is exact matter on following email :- [email protected] or reply this letter