G5 Crashes on Install - Log says Unable to Locate Handle 30

I am getting repeated "Unable to locate handle" messages during install. Sometimes it will stall for a while, but eventually it crashes.
I was able to install Leopard on my original internal drive, but NOT on my Western Digital 500GB drive (which I use as my boot drive in Tiger - wherever Tiger is now that the installer has had it's way with it!

In case your User home directory is mapped to any network location try changing it temporarily to default location on your local machine and then run the installer.
If it still fails try creating a new user account and then run the installer from new user account.

Similar Messages

HT1349 I am trying to burn music to a CD - message says: unable to locate the original file and will not burn the playlist. Is there a setting that I must change. ?

I am trying to burn music to a CD-R- message says: unable to locate the original file. Music is on the iTunes program but will not play or burn. Is there something I should change to be able to burn to CD?

If they were songs you purchased from itunes, try redownloading them from your purchases...
if that doednt work, make sure the optuon to copy files to itunes media folder is checked in settings, then find and download from the net. and re-add them to your library

All my purchased songs from Itunes says unable to locate original file

all of my songs purchased from itunes say unable to locate original file

Did you recently move any files around on your computer. iTunes looks for the files in the original location; if they are moved this can create problems. One possibility is to right click on one of the songs with an exclamation point, and the go to "Get info." This will open a pop-up window that has several tabs.Click on "Summary." At the bottom of this screen, there is a section that says "Where:" This is the path of the original file. Check that location and see if the file is located there (probably not, or you wouldn't get the warning).
Next, I would search Windows for the particular song. Assuming that you find it somewhere, I would bet that is where the rest of the missing files now reside.

TS3772 what do i do when i try to uninstall quicktime it says unable to locate

i need to uninstall quicktime so i can reinstall it on my home computer windows xp but when i try it says unable to locate file....what do i do? please somebody help?

when i try it says unable to locate file
Doublechecking ... is that the QuickTime.msi file?

IPod says unable to locate music video question

Big time newbie here to the whole iPod thing. I bought the touch for my wife for Christmas and I'm trying to load it up with some stuff before I give it to her. I bought a music video on iTunes and when I sync and try to load it I get a message that says "unable to locate video". I look in the iTunes folder and I can see it there. I restarted the iPod and the computer and still got the same message. I can watch the video on my computer via the iTunes player. Any suggestions? Thanks.

If you backed it to iTunes you should be good with all the pictures, videos, etc. and they are still here. However there isn't really any way to retrieve them without the use of 3rd party software. Sorry for your loss

HT1925 I am not able to install updates for itunes every time I try to install it says unable to install becasue a network program cannot be found (iTune. MSI

the iTunes upate fails everytime I try to update ,,,,,messages says not able to find source on the network ...iTunes.MSI I have tried to download manually still fails

(1) Download the Windows Installer CleanUp utility installer file (msicuu2.exe) from the following Major Geeks page (use one of the links under the "DOWNLOAD LOCATIONS" thingy on the Major Geeks page):
http://majorgeeks.com/download.php?det=4459
(2) Doubleclick the msicuu2.exe file and follow the prompts to install the Windows Installer CleanUp utility. (If you're on a Windows Vista or Windows 7 system and you get a Code 800A0046 error message when doubleclicking the msicuu2.exe file, try instead right-clicking on the msicuu2.exe file and selecting "Run as administrator".)
(3) In your Start menu click All Programs and then click Windows Install Clean Up. The Windows Installer CleanUp utility window appears, listing software that is currently installed on your computer.
(4) In the list of programs that appears in CleanUp, select any iTunes entries and click "Remove", as per the following screenshot:
(5) Quit out of CleanUp, restart the PC and try another iTunes install. Does it go through properly this time?

HT201272 all of music downloads in my library show a exclamation point prior to the check box, when i try to click the song, it says unable to locate even though all the preferences are saying it's there. where is my music? please help

I was trying to sync my ipod and for whatever reason my iTunes wasn't recognizing my ipod anymore and asked if I wanted to erase it and basically start over. So I said yes, thinking it would then put my music library back on my ipod, but instead now it shows all my music but it won't play or sync. When I try to play any song, it says it can't be located and asks if I would like to locate it, but I still can't find it! I've had to go into the iTunes store and redownload songs and that works. But I would really like to just locate my library wherever it is in my computer. Help!

I'm in the same boat...so far no one has helped here

[2012 R2] Cannot install Reporting Point - Unable to locate SSRS

Hi all,
For some reason I cannot install a new site server with the reporting point role. I receive an error that to valid SSRS instances can be found on the site server.
A little bit (not all servers) more about my environment
CAS Environment:
- Server 1 - SQL
- Server 2 - CAS
- Server 3 - Reporting Point (installed correctly)
Primary Site:
- Server 4 - Primary Site + SQL 2012 SP1
- Server 5 - Reporting Point (SQL 2012 SP1 only SSRS role)
I Installed SSRS in native mode with the Reporting databases created on Server 4.
Web Service and Report Manager URL created (recreated a couple of times)
http://server5/reports and /ReportServer CAN be accessed from the Primary Site server.
I am not trying to add the reporting point to the Server4...only to server5 where SSRS is installed.
No related event errors found.
Hope someone can help me out with this one.
Thanks in advance,
Bart
Bart Timmermans | Consultant at inovativ
Follow me @
My Blog | Linkedin |
Twitter
Please mark as Answer, if my post answers your Question. Vote as Helpful, if it is helpful to you.

Hi
Could it be, that the user which has opened the console to install the reporting service rule is not a Administrator on the SQL server?
For the wizard you need to be an administrator. Then, the installation will running under the site server system context.

Music on new PC is missing in iTunes - saying unable to locate

After downloading iTunes to new PC, (the old one is now broken). In my new PC, in Itunes, some music in hte library has an ! next to it and when you try to play it a message says "some music can not be located".
Most of this music was originally purchased from iTunes. I have looked in the apple support but can not see a solution. THis music which is missing is on my old iPod, is there a way to upload it from there back into my PC, in order that the new devices (on which the music wont download) can be updated?
Please reply in a non-tecnical way, as some of the solutions are a bit over my head.
Thanks

Authorize the new computer.
From the iTunes menu bar click Store > Authorize this Computer
Downloading past purchases from the App Store, iBookstore, and iTunes Store

My recently purchased songs wont play, popup says unable to locate

my recently purchased songs wont play in itunes, album grafics keep disappearing, pop up says original file could not be found. Also my ipod freezes up when I try to play these songs on it.

Hello musiccc
That means that iTunes cannot find the file to play. The article below will assist with finding the files on your computer. If they are not on your computer, then delete them in iTunes so you can download those purchases again.
iTunes: Finding lost media and downloads
http://support.apple.com/kb/ts1408
Downloading past purchases from the iTunes Store, App Store, and iBooks Store
http://support.apple.com/kb/ht2519
Regards,
-Norm G.

Thunderbird says "Unable to locate mail spool file."

I am trying to use Thunderbird to get gmail. First attempts failed but going to gmail (webmail) I find Thunderbird is a "less secure APP". Set Gmail to work with "less secure APP" but now I get "thunderbird cannot locate spool file" I deleted Thunderbird and reinstalled it . Now I still get "Thunderbird cannot locate spool file"
Any advice gratefully received!

Is that the entire error message?
Please post your Troubleshooting Information.
AppMenu button - Help - Troubleshooting Information

Can't log in to Lion Server. Open Directory Log Message says: unable to connect to password server

I am setting up Lion Server. I can't log in to Lion Server from client.
Checking the Open Directory Log: says: "unable to connect to password server" or
"3394.14268, Node: /LDAPv3/127.0.0.1, Module: AppleODClient - unable to read Password Server response - connection to Password Server was closed, socket fd 18 (5205)"
Thanks for help with this.

I never discovered the problem, and instead rebuilt the server from the ground up. I followed instructions at this discussion thread. Very helpful.
How To Install A (Almost) Working Lion Server With Profile Management/SSL/OD/Mail/iCal/Address Book/VNC/Web/etc.
I have had some log-in problems with users. I have found that restarting the server helps. If this doesn't work, I rebuild permissions on the server, followed by opening up Workgroup Manager, go to the user's password, click on options and require that the user change password on the next log-in. For some reason, this will usually fix the problem. I then log in as the user, and "change" the password to the original one. Also note, that if you import a user, the password is not brought in. You must enter it for each user that you imported. Even so, I have often had to resort to the re-set password procedure to enable a log-in.

Error Log entry Unable to write file with XML Saver

Hi all,
I have just encountered the following problem. I am saving a XML file using the XML Saver. Another BLT reads the file, changes something, and saves it again with the same name.
The file is saved, but the NetWeaver SAP Log gives the error
"Unable to write file /usr/sap/<SID>/JC00/j2ee/cluster/server0/apps/sap.com/xappsxmiiear/servlet_jsp/XMII/root/CM/<folder>/file.xml"
Is it a problem with the new storage mechanism in MII 12? Even if I delete the file first and then save it again with the same name, the error is displayed (though the file is saved).
Michael

Hi Mike,
no, the Debug only says "Begin Action XML Saver" and "End Action XML Saver".
The action however writes the file, the contents has changed after the BLT has run.
Well, I have just tried the Text Saver with the same file (name and contents). It also gives the error. I now wanted to delete the folder. The folder disappered from the workbench view, and the Netweaver log says "Unable to process service message".
I then clicked "publish" on the parent folder and tried to create the folder again, but although the folder was not displayed, the workbench said "the folder already exists". When I start my BLT, it could write the file into the folder which then reappeared in the workbench.
Hm, maybe our installation has some problems? Feels like missing authorizations...
Michael

Unable to locate labview run time engine (lab view 8.5)

Hello I have a problem whit the labview 8.5 installer. I have created I project with included a .vi file (a simple panel wich control a serial port, with parameters (baud rate, stop bits, ...)), then I have created an application for this file (.exe) and then the installer (I have included the labview run time engine 8.5). When I run the setup.exe I have the following error message:
Unable to locate labview run time engine, the application require a labview run time engine 8.5 or compatible...
What I'm missing??
Thanks
Maurizio

are there one other reasons why it would not work. I have asimilar problem.
I intsalled version 8 of run time engine and acrtivated software. Now I am trying to run compiled application provided to me by third party.
When I click on application it says
Unable to locate LV run time engine
Test server requires a version 6.0 or compatible LV engine.
How do I know if the engine I installed and activated is running and is it supposed to be able to execute a program which is expectin rev 6 of the rund engine?

AE Error message: Unable to locate plugin "Boris Red 3.0 FCP Filter"

I have edited a project in FCS HD and went back to make some changes and now when I open the project I get an error message that says "Unable to locate plugin "Boris Red 3.0 FCP Filter."
I used the Boris Red application to make some effects and had no problem with this before. I have located the filter in the users library/Application support files but I can't get Final Cut Pro to accept it. I went to the Boris Red website and found no help there, nor have they responded to my requests for assistance so I thought I would look here.
Another user posted this same problem at another website and the responses he got were not useful either. Can anyone help?

I re-installed the program and nothing changed. How do I retro FCP?
The older version I used does not work on Intel Mac Pros and the graphics card it requires is also obsolete. (Actually, it died and couldn't be replaced which forced me to drop my G5 and get a new MAc Pro which started this whole nightmare in the first place!)
So am I screwed? There really is no way to fix this and save all that work now? I have the After Effects program so would it be better to just forget about Boris altogether and redo the entire project in After Effects?
If so, I can't believe what a waste of time and money Boris is. All because FCP cannot locate ONE filter? When the filter is sitting right where it is supposed to be?

G5 Crashes on Install - Log says Unable to Locate Handle 30

Similar Messages

Maybe you are looking for