G5 Dual unstable after re-installation
Just re-installed 10.4.6 on my system and now my system is very unstable... crashing often.
here is what i have tried already:
Upgrading to 10.4.7
updating the firmware to 5.1.4
still after these attemps the system is extreamly unstable
vobbie-
In addition to my other post have you tried reducing the RAM to what was originally supplied by Apple?
Luck-
-DaddyPaycheck
Similar Messages
-
Serious problems after Mavericks installation with External Drive Lacie P9220.
Experiencing serious problems after Mavericks installation with External Drive Lacie P9220 1TB. Mac Finder totally locked!
I had to format the External hard drive with a Windows PC (fat32), then format again with my IMac (mac Journal.) and hopefully restored data from time machine backup.
So far so good but system looks unstable. Some software were not able to write on the hard drive.Some strange things happens. With Mountain Lion never had an even minor issue.
I read many discussion regarding problems with WD, just wondering if anyone had the same problems with Lacie and if there is any tip to solve the
problem.
Many thanks.
MarcoThanks very much for your reply.
Unfortunately I couldn't find a solution because the article refers to whom have configured the drive with included software and drivers that came with the drive.
This is not my case, I never used any third party soft ...only OS X disk utility ...
best
marco -
Database is not starting after RAC installation
Hi All,
I have installed 10g R2 2-node RAC on RHEL4 without any problem. But after the installation the database is not starting and i'm not able to connect. It is showing the below error..
ERROR:
ORA-01034: ORACLE not available
ORA-27101: shared memory realm does not exist
Linux Error: 2: No such file or directory
Can anybody help what might be the problem?
Thanks,
PraveenHi,
I'm giving the contents of alter log file from the first node...
Mon Feb 19 16:45:59 2007
Starting ORACLE instance (normal)
LICENSE_MAX_SESSION = 0
LICENSE_SESSIONS_WARNING = 0
Interface type 1 eth1 10.250.90.0 configured from OCR for use as a cluster interconnect
Interface type 1 eth0 10.250.90.0 configured from OCR for use as a public interface
Shared memory segment for instance monitoring created
Picked latch-free SCN scheme 2
Autotune of undo retention is turned on.
IMODE=BR
ILAT =36
LICENSE_MAX_USERS = 0
SYS auditing is disabled
ksdpec: called for event 13740 prior to event group initialization
Starting up ORACLE RDBMS Version: 10.2.0.2.0.
System parameters with non-default values:
processes = 300
sessions = 335
sga_max_size = 1073741824
sga_target = 1073741824
db_block_size = 8192
compatible = 10.2.0.2.0
log_archive_dest_1 = LOCATION=+BSA_DATA1/bsaprod/
log_archive_format = %t_%s_%r.dbf
db_file_multiblock_read_count= 16
cluster_database_instances= 1
db_create_file_dest = +ORCL_DATA1
instance_number = 1
undo_management = AUTO
undo_tablespace = UNDOTBS1
remote_login_passwordfile= EXCLUSIVE
db_domain =
dispatchers = (PROTOCOL=TCP) (SERVICE=bsaprodXDB)
remote_listener = LISTENERS_BSAPROD
job_queue_processes = 10
background_dump_dest = /u01/app/oracle/oracle/admin/bsaprod/bdump
user_dump_dest = /u01/app/oracle/oracle/admin/bsaprod/udump
core_dump_dest = /u01/app/oracle/oracle/admin/bsaprod/cdump
audit_file_dest = /u01/app/oracle/oracle/admin/bsaprod/adump
db_name = bsaprod
open_cursors = 300
pga_aggregate_target = 262144000
Cluster communication is configured to use the following interface(s) for this instance
10.250.90.107
Mon Feb 19 16:46:00 2007
cluster interconnect IPC version:Oracle UDP/IP (generic)
IPC Vendor 1 proto 2
PMON started with pid=2, OS id=31282
DIAG started with pid=3, OS id=31284
PSP0 started with pid=4, OS id=31286
LMON started with pid=5, OS id=31300
LMD0 started with pid=6, OS id=31315
MMAN started with pid=7, OS id=31317
DBW0 started with pid=8, OS id=31319
LGWR started with pid=9, OS id=31321
CKPT started with pid=10, OS id=31323
SMON started with pid=11, OS id=31325
RECO started with pid=12, OS id=31327
CJQ0 started with pid=13, OS id=31329
MMON started with pid=14, OS id=31331
Mon Feb 19 16:46:00 2007
starting up 1 dispatcher(s) for network address '(ADDRESS=(PARTIAL=YES)(PROTOCOL=TCP))'...
MMNL started with pid=15, OS id=31333
Mon Feb 19 16:46:00 2007
starting up 1 shared server(s) ...
Mon Feb 19 16:46:00 2007
lmon registered with NM - instance id 1 (internal mem no 0)
Mon Feb 19 16:46:01 2007
Reconfiguration started (old inc 0, new inc 2)
List of nodes:
0
Global Resource Directory frozen
* allocate domain 0, invalid = TRUE
Communication channels reestablished
Master broadcasted resource hash value bitmaps
Non-local Process blocks cleaned out
Resources and enqueues cleaned out
Resources remastered 0
Set master node info
Submitted all remote-enqueue requests
Dwn-cvts replayed, VALBLKs dubious
All grantable enqueues granted
Post SMON to start 1st pass IR
Submitted all GCS remote-cache requests
Post SMON to start 1st pass IR
Reconfiguration complete
Mon Feb 19 16:46:01 2007
CREATE DATABASE "bsaprod"
MAXINSTANCES 32
MAXLOGHISTORY 1
MAXLOGFILES 192
MAXLOGMEMBERS 3
MAXDATAFILES 1024
DATAFILE SIZE 300M AUTOEXTEND ON NEXT 10240K MAXSIZE UNLIMITED
EXTENT MANAGEMENT LOCAL
SYSAUX DATAFILE SIZE 120M AUTOEXTEND ON NEXT 10240K MAXSIZE UNLIMITED
SMALLFILE DEFAULT TEMPORARY TABLESPACE TEMP TEMPFILE SIZE 20M AUTOEXTEND ON NEXT 640K MAXSIZE UNLIMITED
SMALLFILE UNDO TABLESPACE "UNDOTBS1" DATAFILE SIZE 200M AUTOEXTEND ON NEXT 5120K MAXSIZE UNLIMITED
CHARACTER SET WE8ISO8859P1
NATIONAL CHARACTER SET AL16UTF16
LOGFILE GROUP 1 SIZE 51200K,
GROUP 2 SIZE 51200K
USER SYS IDENTIFIED BY *USER SYSTEM IDENTIFIED BY
Mon Feb 19 16:46:01 2007
Starting background process ASMB
ASMB started with pid=19, OS id=31365
Starting background process RBAL
RBAL started with pid=20, OS id=31369
Loaded ASM Library - Generic Linux, version 2.0.2 (KABI_V2) library for asmlib interface
Mon Feb 19 16:46:05 2007
SUCCESS: diskgroup ORCL_DATA1 was mounted
SUCCESS: diskgroup ORCL_DATA1 was dismounted
Mon Feb 19 16:46:06 2007
SUCCESS: diskgroup ORCL_DATA1 was mounted
Mon Feb 19 16:46:06 2007
Database mounted in Exclusive Mode
Mon Feb 19 16:46:09 2007
Successful mount of redo thread 1, with mount id 3309011657
Assigning activation ID 3309011657 (0xc53b82c9)
Thread 1 opened at log sequence 1
Current log# 1 seq# 1 mem# 0: +ORCL_DATA1/bsaprod/onlinelog/group_1.257.614969167
Successful open of redo thread 1
Mon Feb 19 16:46:09 2007
MTTR advisory is disabled because FAST_START_MTTR_TARGET is not set
Mon Feb 19 16:46:09 2007
SMON: enabling cache recovery
Mon Feb 19 16:46:09 2007
create tablespace SYSTEM datafile SIZE 300M AUTOEXTEND ON NEXT 10240K MAXSIZE UNLIMITED
EXTENT MANAGEMENT LOCAL online
Mon Feb 19 16:46:20 2007
Completed: create tablespace SYSTEM datafile SIZE 300M AUTOEXTEND ON NEXT 10240K MAXSIZE UNLIMITED
EXTENT MANAGEMENT LOCAL online
Mon Feb 19 16:46:20 2007
create rollback segment SYSTEM tablespace SYSTEM
storage (initial 50K next 50K)
Completed: create rollback segment SYSTEM tablespace SYSTEM
storage (initial 50K next 50K)
Mon Feb 19 16:46:24 2007
CREATE SMALLFILE UNDO TABLESPACE UNDOTBS1 DATAFILE SIZE 200M AUTOEXTEND ON NEXT 5120K MAXSIZE UNLIMITED
Mon Feb 19 16:46:31 2007
Successfully onlined Undo Tablespace 1.
Completed: CREATE SMALLFILE UNDO TABLESPACE UNDOTBS1 DATAFILE SIZE 200M AUTOEXTEND ON NEXT 5120K MAXSIZE UNLIMITED
Mon Feb 19 16:46:31 2007
create tablespace SYSAUX datafile SIZE 120M AUTOEXTEND ON NEXT 10240K MAXSIZE UNLIMITED
EXTENT MANAGEMENT LOCAL SEGMENT SPACE MANAGEMENT AUTO online
Completed: create tablespace SYSAUX datafile SIZE 120M AUTOEXTEND ON NEXT 10240K MAXSIZE UNLIMITED
EXTENT MANAGEMENT LOCAL SEGMENT SPACE MANAGEMENT AUTO online
Mon Feb 19 16:46:36 2007
CREATE SMALLFILE TEMPORARY TABLESPACE TEMP TEMPFILE SIZE 20M AUTOEXTEND ON NEXT 640K MAXSIZE UNLIMITED
Completed: CREATE SMALLFILE TEMPORARY TABLESPACE TEMP TEMPFILE SIZE 20M AUTOEXTEND ON NEXT 640K MAXSIZE UNLIMITED
Mon Feb 19 16:46:36 2007
ALTER DATABASE DEFAULT TEMPORARY TABLESPACE TEMP
Completed: ALTER DATABASE DEFAULT TEMPORARY TABLESPACE TEMP
Mon Feb 19 16:46:36 2007
ALTER DATABASE DEFAULT TABLESPACE SYSTEM
Completed: ALTER DATABASE DEFAULT TABLESPACE SYSTEM
Mon Feb 19 16:46:38 2007
SMON: enabling tx recovery
Mon Feb 19 16:46:39 2007
Threshold validation cannot be done before catproc is loaded.
Threshold validation cannot be done before catproc is loaded.
replication_dependency_tracking turned off (no async multimaster replication found)
Starting background process QMNC
QMNC started with pid=22, OS id=32303
Mon Feb 19 16:46:39 2007
Completed: CREATE DATABASE "bsaprod"
MAXINSTANCES 32
MAXLOGHISTORY 1
MAXLOGFILES 192
MAXLOGMEMBERS 3
MAXDATAFILES 1024
DATAFILE SIZE 300M AUTOEXTEND ON NEXT 10240K MAXSIZE UNLIMITED
EXTENT MANAGEMENT LOCAL
SYSAUX DATAFILE SIZE 120M AUTOEXTEND ON NEXT 10240K MAXSIZE UNLIMITED
SMALLFILE DEFAULT TEMPORARY TABLESPACE TEMP TEMPFILE SIZE 20M AUTOEXTEND ON NEXT 640K MAXSIZE UNLIMITED
SMALLFILE UNDO TABLESPACE "UNDOTBS1" DATAFILE SIZE 200M AUTOEXTEND ON NEXT 5120K MAXSIZE UNLIMITED
CHARACTER SET WE8ISO8859P1
NATIONAL CHARACTER SET AL16UTF16
LOGFILE GROUP 1 SIZE 51200K,
GROUP 2 SIZE 51200K
USER SYS IDENTIFIED BY *USER SYSTEM IDENTIFIED BY
Mon Feb 19 16:46:39 2007
CREATE SMALLFILE UNDO TABLESPACE "UNDOTBS2" DATAFILE SIZE 200M AUTOEXTEND ON NEXT 5120K MAXSIZE UNLIMITED
Completed: CREATE SMALLFILE UNDO TABLESPACE "UNDOTBS2" DATAFILE SIZE 200M AUTOEXTEND ON NEXT 5120K MAXSIZE UNLIMITED
Mon Feb 19 16:46:46 2007
CREATE SMALLFILE TABLESPACE "USERS" LOGGING DATAFILE SIZE 5M AUTOEXTEND ON NEXT 1280K MAXSIZE UNLIMITED EXTENT MANAGEMENT LOCAL SEGMENT SPACE MANAGEMENT AUTO
Completed: CREATE SMALLFILE TABLESPACE "USERS" LOGGING DATAFILE SIZE 5M AUTOEXTEND ON NEXT 1280K MAXSIZE UNLIMITED EXTENT MANAGEMENT LOCAL SEGMENT SPACE MANAGEMENT AUTO
Mon Feb 19 16:46:46 2007
ALTER DATABASE DEFAULT TABLESPACE "USERS"
Completed: ALTER DATABASE DEFAULT TABLESPACE "USERS"
Mon Feb 19 16:47:05 2007
Thread 1 advanced to log sequence 2
Current log# 2 seq# 2 mem# 0: +ORCL_DATA1/bsaprod/onlinelog/group_2.258.614969167
Mon Feb 19 16:47:34 2007
Thread 1 cannot allocate new log, sequence 3
Checkpoint not complete
Current log# 2 seq# 2 mem# 0: +ORCL_DATA1/bsaprod/onlinelog/group_2.258.614969167
Thread 1 advanced to log sequence 3
Current log# 1 seq# 3 mem# 0: +ORCL_DATA1/bsaprod/onlinelog/group_1.257.614969167
Mon Feb 19 16:48:10 2007
Thread 1 cannot allocate new log, sequence 4
Checkpoint not complete
Current log# 1 seq# 3 mem# 0: +ORCL_DATA1/bsaprod/onlinelog/group_1.257.614969167
Thread 1 advanced to log sequence 4
Current log# 2 seq# 4 mem# 0: +ORCL_DATA1/bsaprod/onlinelog/group_2.258.614969167
Mon Feb 19 16:49:05 2007
Thread 1 cannot allocate new log, sequence 5
Checkpoint not complete
Current log# 2 seq# 4 mem# 0: +ORCL_DATA1/bsaprod/onlinelog/group_2.258.614969167
Thread 1 advanced to log sequence 5
Current log# 1 seq# 5 mem# 0: +ORCL_DATA1/bsaprod/onlinelog/group_1.257.614969167
Mon Feb 19 16:50:19 2007
Thread 1 cannot allocate new log, sequence 6
Checkpoint not complete
Current log# 1 seq# 5 mem# 0: +ORCL_DATA1/bsaprod/onlinelog/group_1.257.614969167
Thread 1 advanced to log sequence 6
Current log# 2 seq# 6 mem# 0: +ORCL_DATA1/bsaprod/onlinelog/group_2.258.614969167
Mon Feb 19 16:51:00 2007
Thread 1 cannot allocate new log, sequence 7
Checkpoint not complete
Current log# 2 seq# 6 mem# 0: +ORCL_DATA1/bsaprod/onlinelog/group_2.258.614969167
Thread 1 advanced to log sequence 7
Current log# 1 seq# 7 mem# 0: +ORCL_DATA1/bsaprod/onlinelog/group_1.257.614969167
Mon Feb 19 16:51:54 2007
Thread 1 cannot allocate new log, sequence 8
Checkpoint not complete
Current log# 1 seq# 7 mem# 0: +ORCL_DATA1/bsaprod/onlinelog/group_1.257.614969167
Thread 1 advanced to log sequence 8
Current log# 2 seq# 8 mem# 0: +ORCL_DATA1/bsaprod/onlinelog/group_2.258.614969167
Mon Feb 19 16:55:32 2007
Thread 1 cannot allocate new log, sequence 9
Checkpoint not complete
Current log# 2 seq# 8 mem# 0: +ORCL_DATA1/bsaprod/onlinelog/group_2.258.614969167
Thread 1 advanced to log sequence 9
Current log# 1 seq# 9 mem# 0: +ORCL_DATA1/bsaprod/onlinelog/group_1.257.614969167
Mon Feb 19 16:56:35 2007
Thread 1 cannot allocate new log, sequence 10
Checkpoint not complete
Current log# 1 seq# 9 mem# 0: +ORCL_DATA1/bsaprod/onlinelog/group_1.257.614969167
Thread 1 advanced to log sequence 10
Current log# 2 seq# 10 mem# 0: +ORCL_DATA1/bsaprod/onlinelog/group_2.258.614969167
Mon Feb 19 16:56:52 2007
Thread 1 cannot allocate new log, sequence 11
Checkpoint not complete
Current log# 2 seq# 10 mem# 0: +ORCL_DATA1/bsaprod/onlinelog/group_2.258.614969167
Thread 1 advanced to log sequence 11
Current log# 1 seq# 11 mem# 0: +ORCL_DATA1/bsaprod/onlinelog/group_1.257.614969167
Mon Feb 19 16:57:04 2007
Thread 1 cannot allocate new log, sequence 12
Checkpoint not complete
Current log# 1 seq# 11 mem# 0: +ORCL_DATA1/bsaprod/onlinelog/group_1.257.614969167
Thread 1 advanced to log sequence 12
Current log# 2 seq# 12 mem# 0: +ORCL_DATA1/bsaprod/onlinelog/group_2.258.614969167
Mon Feb 19 16:57:14 2007
Thread 1 cannot allocate new log, sequence 13
Checkpoint not complete
Current log# 2 seq# 12 mem# 0: +ORCL_DATA1/bsaprod/onlinelog/group_2.258.614969167
Thread 1 advanced to log sequence 13
Current log# 1 seq# 13 mem# 0: +ORCL_DATA1/bsaprod/onlinelog/group_1.257.614969167
Mon Feb 19 16:57:31 2007
Thread 1 cannot allocate new log, sequence 14
Checkpoint not complete
Current log# 1 seq# 13 mem# 0: +ORCL_DATA1/bsaprod/onlinelog/group_1.257.614969167
Thread 1 advanced to log sequence 14
Current log# 2 seq# 14 mem# 0: +ORCL_DATA1/bsaprod/onlinelog/group_2.258.614969167
Mon Feb 19 16:58:13 2007
Thread 1 cannot allocate new log, sequence 15
Checkpoint not complete
Current log# 2 seq# 14 mem# 0: +ORCL_DATA1/bsaprod/onlinelog/group_2.258.614969167
Thread 1 advanced to log sequence 15
Current log# 1 seq# 15 mem# 0: +ORCL_DATA1/bsaprod/onlinelog/group_1.257.614969167
Mon Feb 19 16:59:42 2007
Thread 1 cannot allocate new log, sequence 16
Checkpoint not complete
Current log# 1 seq# 15 mem# 0: +ORCL_DATA1/bsaprod/onlinelog/group_1.257.614969167
Thread 1 advanced to log sequence 16
Current log# 2 seq# 16 mem# 0: +ORCL_DATA1/bsaprod/onlinelog/group_2.258.614969167
Mon Feb 19 17:00:33 2007
Thread 1 cannot allocate new log, sequence 17
Checkpoint not complete
Current log# 2 seq# 16 mem# 0: +ORCL_DATA1/bsaprod/onlinelog/group_2.258.614969167
Thread 1 advanced to log sequence 17
Current log# 1 seq# 17 mem# 0: +ORCL_DATA1/bsaprod/onlinelog/group_1.257.614969167
Mon Feb 19 17:01:49 2007
Thread 1 cannot allocate new log, sequence 18
Checkpoint not complete
Current log# 1 seq# 17 mem# 0: +ORCL_DATA1/bsaprod/onlinelog/group_1.257.614969167
Thread 1 advanced to log sequence 18
Current log# 2 seq# 18 mem# 0: +ORCL_DATA1/bsaprod/onlinelog/group_2.258.614969167
Mon Feb 19 17:02:23 2007
Thread 1 cannot allocate new log, sequence 19
Checkpoint not complete
Current log# 2 seq# 18 mem# 0: +ORCL_DATA1/bsaprod/onlinelog/group_2.258.614969167
Thread 1 advanced to log sequence 19
Current log# 1 seq# 19 mem# 0: +ORCL_DATA1/bsaprod/onlinelog/group_1.257.614969167
Mon Feb 19 17:04:06 2007
Thread 1 cannot allocate new log, sequence 20
Checkpoint not complete
Current log# 1 seq# 19 mem# 0: +ORCL_DATA1/bsaprod/onlinelog/group_1.257.614969167
Thread 1 advanced to log sequence 20
Current log# 2 seq# 20 mem# 0: +ORCL_DATA1/bsaprod/onlinelog/group_2.258.614969167
Mon Feb 19 17:05:22 2007
Thread 1 cannot allocate new log, sequence 21
Checkpoint not complete
Current log# 2 seq# 20 mem# 0: +ORCL_DATA1/bsaprod/onlinelog/group_2.258.614969167
Thread 1 advanced to log sequence 21
Current log# 1 seq# 21 mem# 0: +ORCL_DATA1/bsaprod/onlinelog/group_1.257.614969167
Mon Feb 19 17:06:22 2007
Thread 1 cannot allocate new log, sequence 22
Checkpoint not complete
Current log# 1 seq# 21 mem# 0: +ORCL_DATA1/bsaprod/onlinelog/group_1.257.614969167
Thread 1 advanced to log sequence 22
Current log# 2 seq# 22 mem# 0: +ORCL_DATA1/bsaprod/onlinelog/group_2.258.614969167
Mon Feb 19 17:08:42 2007
Thread 1 cannot allocate new log, sequence 23
Checkpoint not complete
Current log# 2 seq# 22 mem# 0: +ORCL_DATA1/bsaprod/onlinelog/group_2.258.614969167
Thread 1 advanced to log sequence 23
Current log# 1 seq# 23 mem# 0: +ORCL_DATA1/bsaprod/onlinelog/group_1.257.614969167
Mon Feb 19 17:09:43 2007
Thread 1 cannot allocate new log, sequence 24
Checkpoint not complete
Current log# 1 seq# 23 mem# 0: +ORCL_DATA1/bsaprod/onlinelog/group_1.257.614969167
Thread 1 advanced to log sequence 24
Current log# 2 seq# 24 mem# 0: +ORCL_DATA1/bsaprod/onlinelog/group_2.258.614969167
Mon Feb 19 17:10:42 2007
Thread 1 cannot allocate new log, sequence 25
Checkpoint not complete
Current log# 2 seq# 24 mem# 0: +ORCL_DATA1/bsaprod/onlinelog/group_2.258.614969167
Thread 1 advanced to log sequence 25
Current log# 1 seq# 25 mem# 0: +ORCL_DATA1/bsaprod/onlinelog/group_1.257.614969167
Mon Feb 19 17:11:31 2007
Thread 1 cannot allocate new log, sequence 26
Checkpoint not complete
Current log# 1 seq# 25 mem# 0: +ORCL_DATA1/bsaprod/onlinelog/group_1.257.614969167
Thread 1 advanced to log sequence 26
Current log# 2 seq# 26 mem# 0: +ORCL_DATA1/bsaprod/onlinelog/group_2.258.614969167
Mon Feb 19 17:12:01 2007
Thread 1 cannot allocate new log, sequence 27
Checkpoint not complete
Current log# 2 seq# 26 mem# 0: +ORCL_DATA1/bsaprod/onlinelog/group_2.258.614969167
Thread 1 advanced to log sequence 27
Current log# 1 seq# 27 mem# 0: +ORCL_DATA1/bsaprod/onlinelog/group_1.257.614969167
Mon Feb 19 17:13:12 2007
Thread 1 cannot allocate new log, sequence 28
Checkpoint not complete
Current log# 1 seq# 27 mem# 0: +ORCL_DATA1/bsaprod/onlinelog/group_1.257.614969167
Thread 1 advanced to log sequence 28
Current log# 2 seq# 28 mem# 0: +ORCL_DATA1/bsaprod/onlinelog/group_2.258.614969167
Mon Feb 19 17:14:05 2007
Thread 1 cannot allocate new log, sequence 29
Checkpoint not complete
Current log# 2 seq# 28 mem# 0: +ORCL_DATA1/bsaprod/onlinelog/group_2.258.614969167
Thread 1 advanced to log sequence 29
Current log# 1 seq# 29 mem# 0: +ORCL_DATA1/bsaprod/onlinelog/group_1.257.614969167
Mon Feb 19 17:14:57 2007
Thread 1 cannot allocate new log, sequence 30
Checkpoint not complete
Current log# 1 seq# 29 mem# 0: +ORCL_DATA1/bsaprod/onlinelog/group_1.257.614969167
Thread 1 advanced to log sequence 30
Current log# 2 seq# 30 mem# 0: +ORCL_DATA1/bsaprod/onlinelog/group_2.258.614969167
Mon Feb 19 17:16:29 2007
Thread 1 cannot allocate new log, sequence 31
Checkpoint not complete
Current log# 2 seq# 30 mem# 0: +ORCL_DATA1/bsaprod/onlinelog/group_2.258.614969167
Thread 1 advanced to log sequence 31
Current log# 1 seq# 31 mem# 0: +ORCL_DATA1/bsaprod/onlinelog/group_1.257.614969167
Mon Feb 19 17:17:54 2007
Starting background process EMN0
EMN0 started with pid=25, OS id=15651
Mon Feb 19 17:17:54 2007
Shutting down instance: further logons disabled
Mon Feb 19 17:17:55 2007
Stopping background process QMNC
Mon Feb 19 17:17:55 2007
Stopping background process CJQ0
Mon Feb 19 17:17:57 2007
Stopping background process MMNL
Mon Feb 19 17:17:58 2007
Stopping background process MMON
Mon Feb 19 17:17:59 2007
Shutting down instance (immediate)
License high water mark = 1
Mon Feb 19 17:17:59 2007
Stopping Job queue slave processes
Mon Feb 19 17:17:59 2007
Job queue slave processes stopped
All dispatchers and shared servers shutdown
Mon Feb 19 17:18:01 2007
ALTER DATABASE CLOSE NORMAL
Mon Feb 19 17:18:01 2007
SMON: disabling tx recovery
SMON: disabling cache recovery
Mon Feb 19 17:18:03 2007
Shutting down archive processes
Archiving is disabled
Archive process shutdown avoided: 0 active
Thread 1 closed at log sequence 31
Successful close of redo thread 1
Mon Feb 19 17:18:04 2007
Completed: ALTER DATABASE CLOSE NORMAL
Mon Feb 19 17:18:04 2007
ALTER DATABASE DISMOUNT
Mon Feb 19 17:18:04 2007
SUCCESS: diskgroup ORCL_DATA1 was dismounted
Mon Feb 19 17:18:04 2007
Completed: ALTER DATABASE DISMOUNT
ARCH: Archival disabled due to shutdown: 1089
Shutting down archive processes
Archiving is disabled
Archive process shutdown avoided: 0 active
ARCH: Archival disabled due to shutdown: 1089
Shutting down archive processes
Archiving is disabled
Archive process shutdown avoided: 0 active
Mon Feb 19 17:18:09 2007
freeing rdom 0
Mon Feb 19 17:18:12 2007
Starting ORACLE instance (normal)
LICENSE_MAX_SESSION = 0
LICENSE_SESSIONS_WARNING = 0
Interface type 1 eth1 10.250.90.0 configured from OCR for use as a cluster interconnect
Interface type 1 eth0 10.250.90.0 configured from OCR for use as a public interface
Picked latch-free SCN scheme 2
Autotune of undo retention is turned on.
IMODE=BR
ILAT =36
LICENSE_MAX_USERS = 0
SYS auditing is disabled
ksdpec: called for event 13740 prior to event group initialization
Starting up ORACLE RDBMS Version: 10.2.0.2.0.
System parameters with non-default values:
processes = 300
sessions = 335
sga_max_size = 1073741824
sga_target = 1073741824
control_files = +ORCL_DATA1/bsaprod/controlfile/current.256.614969167
db_block_size = 8192
compatible = 10.2.0.2.0
log_archive_dest_1 = LOCATION=+BSA_DATA1/bsaprod/
log_archive_format = %t_%s_%r.dbf
db_file_multiblock_read_count= 16
cluster_database_instances= 1
db_create_file_dest = +ORCL_DATA1
instance_number = 1
undo_management = AUTO
undo_tablespace = UNDOTBS1
remote_login_passwordfile= EXCLUSIVE
db_domain =
dispatchers = (PROTOCOL=TCP) (SERVICE=bsaprodXDB)
remote_listener = LISTENERS_BSAPROD
job_queue_processes = 10
background_dump_dest = /u01/app/oracle/oracle/admin/bsaprod/bdump
user_dump_dest = /u01/app/oracle/oracle/admin/bsaprod/udump
core_dump_dest = /u01/app/oracle/oracle/admin/bsaprod/cdump
audit_file_dest = /u01/app/oracle/oracle/admin/bsaprod/adump
db_name = bsaprod
open_cursors = 300
pga_aggregate_target = 262144000
Cluster communication is configured to use the following interface(s) for this instance
10.250.90.107
Mon Feb 19 17:18:13 2007
cluster interconnect IPC version:Oracle UDP/IP (generic)
IPC Vendor 1 proto 2
PMON started with pid=2, OS id=16124
DIAG started with pid=3, OS id=16126
PSP0 started with pid=4, OS id=16128
LMON started with pid=5, OS id=16130
LMD0 started with pid=6, OS id=16132
MMAN started with pid=7, OS id=16134
DBW0 started with pid=8, OS id=16136
LGWR started with pid=9, OS id=16138
CKPT started with pid=10, OS id=16140
SMON started with pid=11, OS id=16142
RECO started with pid=12, OS id=16144
CJQ0 started with pid=13, OS id=16146
MMON started with pid=14, OS id=16148
Mon Feb 19 17:18:13 2007
starting up 1 dispatcher(s) for network address '(ADDRESS=(PARTIAL=YES)(PROTOCOL=TCP))'...
MMNL started with pid=15, OS id=16150
Mon Feb 19 17:18:13 2007
starting up 1 shared server(s) ...
Mon Feb 19 17:18:13 2007
lmon registered with NM - instance id 1 (internal mem no 0)
Mon Feb 19 17:18:14 2007
Reconfiguration started (old inc 0, new inc 2)
List of nodes:
0
Global Resource Directory frozen
* allocate domain 0, invalid = TRUE
Communication channels reestablished
Master broadcasted resource hash value bitmaps
Non-local Process blocks cleaned out
Resources and enqueues cleaned out
Resources remastered 0
Set master node info
Submitted all remote-enqueue requests
Dwn-cvts replayed, VALBLKs dubious
All grantable enqueues granted
Post SMON to start 1st pass IR
Submitted all GCS remote-cache requests
Post SMON to start 1st pass IR
Reconfiguration complete
Mon Feb 19 17:18:14 2007
ALTER DATABASE MOUNT
Mon Feb 19 17:18:14 2007
Starting background process ASMB
ASMB started with pid=19, OS id=16182
Starting background process RBAL
RBAL started with pid=20, OS id=16186
Loaded ASM Library - Generic Linux, version 2.0.2 (KABI_V2) library for asmlib interface
Mon Feb 19 17:18:18 2007
SUCCESS: diskgroup ORCL_DATA1 was mounted
Mon Feb 19 17:18:23 2007
Setting recovery target incarnation to 1
Mon Feb 19 17:18:23 2007
Successful mount of redo thread 1, with mount id 3309012054
Mon Feb 19 17:18:23 2007
Database mounted in Exclusive Mode
Completed: ALTER DATABASE MOUNT
Mon Feb 19 17:18:23 2007
alter database archivelog
Completed: alter database archivelog
Mon Feb 19 17:18:23 2007
alter database open
Mon Feb 19 17:18:23 2007
LGWR: STARTING ARCH PROCESSES
ARC0 started with pid=22, OS id=16393
Mon Feb 19 17:18:23 2007
ARC0: Archival started
ARC1: Archival started
LGWR: STARTING ARCH PROCESSES COMPLETE
ARC1 started with pid=23, OS id=16395
Mon Feb 19 17:18:23 2007
Thread 1 opened at log sequence 31
Current log# 1 seq# 31 mem# 0: +ORCL_DATA1/bsaprod/onlinelog/group_1.257.614969167
Successful open of redo thread 1
Mon Feb 19 17:18:23 2007
MTTR advisory is disabled because FAST_START_MTTR_TARGET is not set
Mon Feb 19 17:18:23 2007
SMON: enabling cache recovery
Mon Feb 19 17:18:23 2007
ARC0: STARTING ARCH PROCESSES
Mon Feb 19 17:18:23 2007
ARC1: Becoming the 'no FAL' ARCH
ARC1: Becoming the 'no SRL' ARCH
Mon Feb 19 17:18:23 2007
ARC2: Archival started
ARC0: STARTING ARCH PROCESSES COMPLETE
ARC0: Becoming the heartbeat ARCH
ARC2 started with pid=24, OS id=16422
Mon Feb 19 17:18:23 2007
Successfully onlined Undo Tablespace 1.
Mon Feb 19 17:18:23 2007
SMON: enabling tx recovery
Mon Feb 19 17:18:23 2007
Database Characterset is WE8ISO8859P1
replication_dependency_tracking turned off (no async multimaster replication found)
Starting background process QMNC
QMNC started with pid=25, OS id=16449
Mon Feb 19 17:18:25 2007
Completed: alter database open
Mon Feb 19 17:18:25 2007
ALTER DATABASE ADD LOGFILE THREAD 2 GROUP 3 SIZE 51200K,
GROUP 4 SIZE 51200K
Completed: ALTER DATABASE ADD LOGFILE THREAD 2 GROUP 3 SIZE 51200K,
GROUP 4 SIZE 51200K
Mon Feb 19 17:18:28 2007
ALTER DATABASE ENABLE PUBLIC THREAD 2
Completed: ALTER DATABASE ENABLE PUBLIC THREAD 2
SUCCESS: diskgroup BSA_DATA1 was mounted
SUCCESS: diskgroup BSA_DATA1 was dismounted
Mon Feb 19 17:18:29 2007
Starting background process EMN0
EMN0 started with pid=26, OS id=16564
Mon Feb 19 17:18:29 2007
Shutting down instance: further logons disabled
Mon Feb 19 17:18:29 2007
Stopping background process QMNC
Mon Feb 19 17:18:29 2007
Stopping background process CJQ0
Mon Feb 19 17:18:30 2007
Stopping background process MMNL
Mon Feb 19 17:18:31 2007
Stopping background process MMON
Mon Feb 19 17:18:32 2007
Shutting down instance (immediate)
License high water mark = 3
Mon Feb 19 17:18:32 2007
Stopping Job queue slave processes
Mon Feb 19 17:18:32 2007
Job queue slave processes stopped
All dispatchers and shared servers shutdown
Mon Feb 19 17:18:34 2007
ALTER DATABASE CLOSE NORMAL
Mon Feb 19 17:18:34 2007
SMON: disabling tx recovery
SMON: disabling cache recovery
Mon Feb 19 17:18:34 2007
Shutting down archive processes
Archiving is disabled
Mon Feb 19 17:18:39 2007
ARCH shutting down
ARC2: Archival stopped
Mon Feb 19 17:18:44 2007
ARCH shutting down
ARC1: Archival stopped
Mon Feb 19 17:18:49 2007
ARCH shutting down
ARC0: Archival stopped
Mon Feb 19 17:18:50 2007
Thread 1 closed at log sequence 31
Successful close of redo thread 1
Mon Feb 19 17:18:51 2007
Completed: ALTER DATABASE CLOSE NORMAL
Mon Feb 19 17:18:51 2007
ALTER DATABASE DISMOUNT
Mon Feb 19 17:18:51 2007
SUCCESS: diskgroup ORCL_DATA1 was dismounted
Mon Feb 19 17:18:51 2007
Completed: ALTER DATABASE DISMOUNT
ARCH: Archival disabled due to shutdown: 1089
Shutting down archive processes
Archiving is disabled
Archive process shutdown avoided: 0 active
ARCH: Archival disabled due to shutdown: 1089
Shutting down archive processes
Archiving is disabled
Archive process shutdown avoided: 0 active
Mon Feb 19 17:18:56 2007
freeing rdom 0
Mon Feb 19 17:18:59 2007
Starting ORACLE instance (normal)
LICENSE_MAX_SESSION = 0
LICENSE_SESSIONS_WARNING = 0
Interface type 1 eth1 10.250.90.0 configured from OCR for use as a cluster interconnect
Interface type 1 eth0 10.250.90.0 configured from OCR for use as a public interface
Picked latch-free SCN scheme 2
Autotune of undo retention is turned on.
LICENSE_MAX_USERS = 0
SYS auditing is disabled
ksdpec: called for event 13740 prior to event group initialization
Starting up ORACLE RDBMS Version: 10.2.0.2.0.
System parameters with non-default values:
processes = 300
sessions = 335
sga_max_size = 1073741824
spfile = +BSA_DATA1/bsaprod/spfilebsaprod.ora
sga_target = 1073741824
control_files = +ORCL_DATA1/bsaprod/controlfile/current.256.614969167
db_block_size = 8192
compatible = 10.2.0.2.0
log_archive_dest_1 = LOCATION=+BSA_DATA1/bsaprod/
log_archive_format = %t_%s_%r.dbf
db_file_multiblock_read_count= 16
cluster_database = TRUE
cluster_database_instances= 2
db_create_file_dest = +ORCL_DATA1
thread = 1
instance_number = 1
undo_management = AUTO
undo_tablespace = UNDOTBS1
remote_login_passwordfile= EXCLUSIVE
db_domain =
dispatchers = (PROTOCOL=TCP) (SERVICE=bsaprodXDB)
remote_listener = LISTENERS_BSAPROD
job_queue_processes = 10
background_dump_dest = /u01/app/oracle/oracle/admin/bsaprod/bdump
user_dump_dest = /u01/app/oracle/oracle/admin/bsaprod/udump
core_dump_dest = /u01/app/oracle/oracle/admin/bsaprod/cdump
audit_file_dest = /u01/app/oracle/oracle/admin/bsaprod/adump
db_name = bsaprod
open_cursors = 300
pga_aggregate_target = 262144000
Cluster communication is configured to use the following interface(s) for this instance
10.250.90.107
Mon Feb 19 17:19:00 2007
cluster interconnect IPC version:Oracle UDP/IP (generic)
IPC Vendor 1 proto 2
PMON started with pid=2, OS id=17373
DIAG started with pid=3, OS id=17375
PSP0 started with pid=4, OS id=17377
LMON started with pid=5, OS id=17379
LMD0 started with pid=6, OS id=17381
LMS0 started with pid=7, OS id=17383
LMS1 started with pid=8, OS id=17387
MMAN started with pid=9, OS id=17391
DBW0 started with pid=10, OS id=17393
LGWR started with pid=11, OS id=17395
CKPT started with pid=12, OS id=17397
SMON started with pid=13, OS id=17399
RECO started with pid=14, OS id=17412
CJQ0 started with pid=15, OS id=17428
MMON started with pid=16, OS id=17430
Mon Feb 19 17:19:00 2007
starting up 1 dispatcher(s) for network address '(ADDRESS=(PARTIAL=YES)(PROTOCOL=TCP))'...
MMNL started with pid=17, OS id=17432
Mon Feb 19 17:19:00 2007
starting up 1 shared server(s) ...
Mon Feb 19 17:19:01 2007
lmon registered with NM - instance id 1 (internal mem no 0)
Mon Feb 19 17:19:01 2007
Reconfiguration started (old inc 0, new inc 2)
List of nodes:
0
Global Resource Directory frozen
* allocate domain 0, invalid = TRUE
Communication channels reestablished
Master broadcasted resource hash value bitmaps
Non-local Process blocks cleaned out
Mon Feb 19 17:19:01 2007
LMS 1: 0 GCS shadows cancelled, 0 closed
Mon Feb 19 17:19:01 2007
LMS 0: 0 GCS shadows cancelled, 0 closed
Set master node info
Submitted all remote-enqueue requests
Dwn-cvts replayed, VALBLKs dubious
All grantable enqueues granted
Post SMON to start 1st pass IR
Mon Feb 19 17:19:01 2007
LMS 1: 0 GCS shadows traversed, 0 replayed
Mon Feb 19 17:19:01 2007
LMS 0: 0 GCS shadows traversed, 0 replayed
Mon Feb 19 17:19:01 2007
Submitted all GCS remote-cache requests
Post SMON to start 1st pass IR
Fix write in gcs resources
Reconfiguration complete
LCK0 started with pid=20, OS id=17460
Mon Feb 19 17:19:02 2007
ALTER DATABASE MOUNT
Mon Feb 19 17:19:02 2007
This instance was first to mount
Mon Feb 19 17:19:02 2007
Starting background process ASMB
ASMB started with pid=22, OS id=17466
Starting background process RBAL
RBAL started with pid=23, OS id=17470
Loaded ASM Library - Generic Linux, version 2.0.2 (KABI_V2) library for asmlib interface
Mon Feb 19 17:19:06 2007
SUCCESS: diskgroup ORCL_DATA1 was mounted
Mon Feb 19 17:19:09 2007
SUCCESS: diskgroup BSA_DATA1 was mounted
SUCCESS: diskgroup BSA_DATA1 was dismounted
SUCCESS: diskgroup BSA_DATA1 was mounted
SUCCESS: diskgroup BSA_DATA1 was dismounted
Mon Feb 19 17:19:10 2007
Setting recovery target incarnation to 1
Mon Feb 19 17:19:10 2007
Successful mount of redo thread 1, with mount id 3308997510
Mon Feb 19 17:19:10 2007
Database mounted in Shared Mode (CLUSTER_DATABASE=TRUE)
Completed: ALTER DATABASE MOUNT
Mon Feb 19 17:19:11 2007
ALTER DATABASE OPEN
This instance was first to open
Picked broadcast on commit scheme to generate SCNs
Mon Feb 19 17:19:11 2007
LGWR: STARTING ARCH PROCESSES
ARC0 started with pid=26, OS id=17679
Mon Feb 19 17:19:11 2007
ARC0: Archival started
ARC1: Archival started
LGWR: STARTING ARCH PROCESSES COMPLETE
ARC1 started with pid=27, OS id=17706
Mon Feb 19 17:19:11 2007
Thread 1 opened at log sequence 31
Current log# 1 seq# 31 mem# 0: +ORCL_DATA1/bsaprod/onlinelog/group_1.257.614969167
Successful open of redo thread 1
Mon Feb 19 17:19:11 2007
MTTR advisory is disabled because FAST_START_MTTR_TARGET is not set
Mon Feb 19 17:19:11 2007
ARC0: STARTING ARCH PROCESSES
Mon Feb 19 17:19:11 2007
ARC1: Becoming the 'no FAL' ARCH
ARC1: Becoming the 'no SRL' ARCH
Mon Feb 19 17:19:11 2007
SMON: enabling cache recovery
Mon Feb 19 17:19:11 2007
ARC2: Archival started
ARC0: STARTING ARCH PROCESSES COMPLETE
ARC0: Becoming the heartbeat ARCH
ARC2 started with pid=28, OS id=17708
Mon Feb 19 17:19:11 2007
Successfully onlined Undo Tablespace 1.
Mon Feb 19 17:19:11 2007
SMON: enabling tx recovery
Mon Feb 19 17:19:11 2007
Database Characterset is WE8ISO8859P1
Mon Feb 19 17:19:11 2007
Instance recovery: looking for dead threads
Instance recovery: lock domain invalid but no dead threads
Mon Feb 19 17:19:12 2007
SUCCESS: diskgroup BSA_DATA1 was mounted
SUCCESS: diskgroup BSA_DATA1 was dismounted
SUCCESS: diskgroup BSA_DATA1 was mounted
SUCCESS: diskgroup BSA_DATA1 was dismounted
SUCCESS: diskgroup BSA_DATA1 was mounted
SUCCESS: diskgroup BSA_DATA1 was dismounted
SUCCESS: diskgroup BSA_DATA1 was mounted
SUCCESS: diskgroup BSA_DATA1 was dismounted
SUCCESS: diskgroup BSA_DATA1 was mounted
SUCCESS: diskgroup BSA_DATA1 was dismounted
Mon Feb 19 17:19:12 2007
replication_dependency_tracking turned off (no async multimaster replication found)
Starting background process QMNC
QMNC started with pid=29, OS id=17735
Mon Feb 19 17:19:13 2007
Completed: ALTER DATABASE OPEN
Mon Feb 19 17:20:11 2007
Shutting down archive processes
Mon Feb 19 17:20:16 2007
ARCH shutting down
ARC2: Archival stopped
Mon Feb 19 17:23:35 2007
Starting background process EMN0
EMN0 started with pid=74, OS id=28350
Mon Feb 19 17:23:35 2007
Shutting down instance: further logons disabled
Mon Feb 19 17:23:36 2007
Stopping background process QMNC
Mon Feb 19 17:23:36 2007
Stopping background process CJQ0
Mon Feb 19 17:23:38 2007
Stopping background process MMNL
Mon Feb 19 17:23:39 2007
Stopping background process MMON
Mon Feb 19 17:23:40 2007
Shutting down instance (immediate)
License high water mark = 34
Mon Feb 19 17:23:40 2007
Stopping Job queue slave processes
Mon Feb 19 17:23:40 2007
Job queue slave processes stopped
All dispatchers and shared servers shutdown
Mon Feb 19 17:24:07 2007
ALTER DATABASE CLOSE NORMAL
Mon Feb 19 17:24:07 2007
SMON: disabling tx recovery
SMON: disabling cache recovery
Mon Feb 19 17:24:08 2007
Shutting down archive processes
Archiving is disabled
Mon Feb 19 17:24:18 2007
ARC1: Becoming the 'no FAL' ARCH
ARC1: Becoming the 'no SRL' ARCH
ARC1: Archiving disabled
ARCH shutting down
Mon Feb 19 17:24:18 2007
ARC1: Archival stopped
Mon Feb 19 17:24:18 2007
ARC0: Becoming the heartbeat ARCH
Mon Feb 19 17:24:18 2007
ARC0: Archiving disabled
ARCH shutting down
ARC0: Archival stopped
Mon Feb 19 17:24:19 2007
Thread 1 closed at log sequence 31
Successful close of redo thread 1
Mon Feb 19 17:24:19 2007
Completed: ALTER DATABASE CLOSE NORMAL
Mon Feb 19 17:24:19 2007
ALTER DATABASE DISMOUNT
Mon Feb 19 17:24:19 2007
SUCCESS: diskgroup ORCL_DATA1 was dismounted
Mon Feb 19 17:24:19 2007
Completed: ALTER DATABASE DISMOUNT
ARCH: Archival disabled due to shutdown: 1089
Shutting down archive processes
Archiving is disabled
Archive process shutdown avoided: 0 active
ARCH: Archival disabled due to shutdown: 1089
Shutting down archive processes
Archiving is disabled
Archive process shutdown avoided: 0 active
Mon Feb 19 17:24:25 2007
freeing rdom 0
Mon Feb 19 17:24:35 2007
Starting ORACLE instance (normal)
LICENSE_MAX_SESSION = 0
LICENSE_SESSIONS_WARNING = 0
Interface type 1 eth1 10.250.90.0 configured from OCR for use as a cluster interconnect
Interface type 1 eth0 10.250.90.0 configured from OCR for use as a public interface
Picked latch-free SCN scheme 2
Autotune of undo retention is turned on.
LICENSE_MAX_USERS = 0
SYS auditing is disabled
ksdpec: called for event 13740 prior to event group initialization
Starting up ORACLE RDBMS Version: 10.2.0.2.0.
System parameters with non-default values:
processes = 300
sessions = 335
sga_max_size = 1073741824
__shared_pool_size = 255852544
__large_pool_size = 4194304
__java_pool_size = 4194304
__streams_pool_size = 0
spfile = +BSA_DATA1/bsaprod/spfilebsaprod.ora
sga_target = 1073741824
control_files = +ORCL_DATA1/bsaprod/controlfile/current.256.614969167
db_block_size = 8192
__db_cache_size = 801112064
compatible = 10.2.0.2.0
log_archive_dest_1 = LOCATION=+BSA_DATA1/bsaprod/
log_archive_format = %t_%s_%r.dbf
db_file_multiblock_read_count= 16
cluster_database = TRUE
cluster_database_instances= 2
db_create_file_dest = +ORCL_DATA1
thread = 1
instance_number = 1
undo_management = AUTO
undo_tablespace = UNDOTBS1
remote_login_passwordfile= EXCLUSIVE
db_domain =
dispatchers = (PROTOCOL=TCP) (SERVICE=bsaprodXDB)
remote_listener = LISTENERS_BSAPROD
job_queue_processes = 10
background_dump_dest = /u01/app/oracle/oracle/admin/bsaprod/bdump
user_dump_dest = /u01/app/oracle/oracle/admin/bsaprod/udump
core_dump_dest = /u01/app/oracle/oracle/admin/bsaprod/cdump
audit_file_dest = /u01/app/oracle/oracle/admin/bsaprod/adump
db_name = bsaprod
open_cursors = 300
pga_aggregate_target = 262144000
Cluster communication is configured to use the following interface(s) for this instance
10.250.90.107
Mon Feb 19 17:24:35 2007
cluster interconnect IPC version:Oracle UDP/IP (generic)
IPC Vendor 1 proto 2
PMON started with pid=2, OS id=29950
DIAG started with pid=3, OS id=29952
PSP0 started with pid=4, OS id=29954
LMON started with pid=5, OS id=29956
LMD0 started with pid=6, OS id=29958
LMS0 started with pid=7, OS id=29960
LMS1 started with pid=8, OS id=29964
MMAN started with pid=9, OS id=29968
DBW0 started with pid=10, OS id=29970
LGWR started with pid=11, OS id=29972
CKPT started with pid=12, OS id=29974
SMON started with pid=13, OS id=29976
RECO started with pid=14, OS id=29978
CJQ0 started with pid=15, OS id=29980
MMON started with pid=16, OS id=29982
Mon Feb 19 17:24:36 2007
starting up 1 dispatcher(s) for network address '(ADDRESS=(PARTIAL=YES)(PROTOCOL=TCP))'...
MMNL started with pid=17, OS id=29984
Mon Feb 19 17:24:36 2007
starting up 1 shared server(s) ...
Mon Feb 19 17:24:36 2007
lmon registered with NM - instance id 1 (internal mem no 0)
Mon Feb 19 17:24:39 2007
Reconfiguration started (old inc 0, new inc 4)
List of nodes:
0 1
Global Resource Directory frozen
* allocate domain 0, invalid = TRUE
Communication channels reestablished
* domain 0 not valid according to instance 1
* domain 0 valid = 0 according to instance 1
Mon Feb 19 17:24:39 2007
Master broadcasted resource hash value bitmaps
Non-local Process blocks cleaned out
Mon Feb 19 17:24:39 2007
LMS 1: 0 GCS shadows cancelled, 0 closed
Mon Feb 19 17:24:39 2007
LMS 0: 0 GCS shadows cancelled, 0 closed
Set master node info
Submitted all remote-enqueue requests
Dwn-cvts replayed, VALBLKs dubious
All grantable enqueues granted
Mon Feb 19 17:24:39 2007
LMS 0: 0 GCS shadows traversed, 0 replayed
Mon Feb 19 17:24:39 2007
LMS 1: 0 GCS shadows traversed, 0 replayed
Mon Feb 19 17:24:39 2007
Submitted all GCS remote-cache requests
Post SMON to start 1st pass IR
Fix write in gcs resources
Reconfiguration complete
LCK0 started with pid=20, OS id=30069
Mon Feb 19 17:24:40 2007
ALTER DATABASE MOUNT
Mon Feb 19 17:24:41 2007
Starting background process ASMB
ASMB started with pid=22, OS id=30121
Starting background process RBAL
RBAL started with pid=23, OS id=30125
Loaded ASM Library - Generic Linux, version 2.0.2 (KABI_V2) library for asmlib interface
Mon Feb 19 17:24:45 2007
SUCCESS: diskgroup ORCL_DATA1 was mounted
Mon Feb 19 17:24:49 2007
Setting recovery target incarnation to 1
Mon Feb 19 17:24:49 2007
Successful mount of redo thread 1, with mount id 3309017062
Mon Feb 19 17:24:49 2007
Database mounted in Shared Mode (CLUSTER_DATABASE=TRUE)
Mon Feb 19 17:24:51 2007
SUCCESS: diskgroup BSA_DATA1 was mounted
SUCCESS: diskgroup BSA_DATA1 was dismounted
SUCCESS: diskgroup BSA_DATA1 was mounted
SUCCESS: diskgroup BSA_DATA1 was dismounted
SUCCESS: diskgroup BSA_DATA1 was mounted
SUCCESS: diskgroup BSA_DATA1 was dismounted
SUCCESS: diskgroup BSA_DATA1 was mounted
SUCCESS: diskgroup BSA_DATA1 was dismounted
SUCCESS: diskgroup BSA_DATA1 was mounted
SUCCESS: diskgroup BSA_DATA1 was dismounted
Mon Feb 19 17:24:52 2007
Completed: ALTER DATABASE MOUNT
Mon Feb 19 17:24:52 2007
ALTER DATABASE OPEN
Picked broadcast on commit scheme to generate SCNs
Mon Feb 19 17:24:52 2007
LGWR: STARTING ARCH PROCESSES
ARC0 started with pid=25, OS id=30406
Mon Feb 19 17:24:53 2007
ARC0: Archival started
ARC1: Archival started
LGWR: STARTING ARCH PROCESSES COMPLETE
ARC1 started with pid=26, OS id=30422
Mon Feb 19 17:24:53 2007
Thread 1 opened at log sequence 31
Current log# 1 seq# 31 mem# 0: +ORCL_DATA1/bsaprod/onlinelog/group_1.257.614969167
Successful open of redo thread 1
Mon Feb 19 17:24:53 2007
MTTR advisory is disabled because FAST_START_MTTR_TARGET is not set
Mon Feb 19 17:24:53 2007
ARC0: STARTING ARCH PROCESSES
Mon Feb 19 17:24:53 2007
ARC1: Becoming the 'no FAL' ARCH
ARC1: Becoming the 'no SRL' ARCH
Mon Feb 19 17:24:53 2007
SMON: enabling cache recovery
Mon Feb 19 17:24:53 2007
ARC2: Archival started
ARC0: STARTING ARCH PROCESSES COMPLETE
ARC0: Becoming the heartbeat ARCH
ARC2 started with pid=27, OS id=30436
Mon Feb 19 17:25:07 2007
Successfully onlined Undo Tablespace 1.
Mon Feb 19 17:25:07 2007
SMON: enabling tx recovery
Mon Feb 19 17:25:07 2007
Database Characterset is WE8ISO8859P1
replication_dependency_tracking turned off (no async multimaster replication found)
Starting background process QMNC
QMNC started with pid=29, OS id=30882
Mon Feb 19 17:26:31 2007
Completed: ALTER DATABASE OPEN
Mon Feb 19 17:26:38 2007
ALTER SYSTEM SET service_names='bsaprod','bsatest' SCOPE=MEMORY SID='bsaprod1';
Mon Feb 19 17:26:53 2007
Shutting down archive processes
Mon Feb 19 17:26:58 2007
ARCH shutting down
ARC2: Archival stopped
Mon Feb 19 17:32:16 2007
Error: KGXGN aborts the instance (6)
Mon Feb 19 17:32:16 2007
Errors in file /u01/app/oracle/oracle/admin/bsaprod/bdump/bsaprod1_lmon_29956.trc:
ORA-29702: error occurred in Cluster Group Service operation
LMON: terminating instance due to error 29702
Mon Feb 19 17:32:17 2007
System state dump is made for local instance
System State dumped to trace file /u01/app/oracle/oracle/admin/bsaprod/bdump/bsaprod1_diag_29952.trc
Mon Feb 19 17:32:18 2007
Trace dumping is performing id=[cdmp_20070219173217]
Mon Feb 19 17:32:21 2007
Instance terminated by LMON, pid = 29956
and also the output of crs_stat -t in first node is....
Name Type Target State Host
ora....d1.inst application ONLINE OFFLINE
ora....d2.inst application ONLINE OFFLINE
ora....od1.srv application ONLINE OFFLINE
ora....od2.srv application ONLINE OFFLINE
ora....test.cs application ONLINE OFFLINE
ora.bsaprod.db application ONLINE OFFLINE
ora....SM1.asm application ONLINE UNKNOWN dsrvbd003
ora....ER.lsnr application ONLINE UNKNOWN dsrvbd003
ora....03.lsnr application ONLINE UNKNOWN dsrvbd003
ora....003.gsd application ONLINE UNKNOWN dsrvbd003
ora....003.ons application ONLINE UNKNOWN dsrvbd003
ora....003.vip application ONLINE ONLINE dsrvbd003
ora....SM2.asm application ONLINE OFFLINE
ora....04.lsnr application ONLINE OFFLINE
ora....004.gsd application ONLINE OFFLINE
ora....004.ons application ONLINE OFFLINE
ora....004.vip application ONLINE OFFLINE -
Tecra 9000: After SP2 installation the Yamaha sound driver does not work
Hi,
I own a Tecra 9000, with a Yamaha AC-XG sound card.
The problem is that since I installed Windows XP with SP2 included, I lost my sound.
I know also that Toshiba is aware of this situation and they have managed to post a solution for it. I've tried this solution:
Detail:
The Yamaha AC-XG driver uses PortCls function for checking the operatingsystem version. XP Service Pack 1, PortCls function is changed, then the Yamaha driver cannot get operatingsystem version correctly. The operatingsystem provides the version for Windows 95. Therefore the Operatingsystem has a blue screen. Therefore Microsoft added the workaround and illegal drivers are blocked from working on SP1. This issue also happens Windows XP SP2.
Yamaha already provides the fixed drvier to Toshiba. The fixed driver version is the following;
yacxg.sys 6.13.10.2152 with software synthesizer
yacxgc.sys 6.13.10.3152 without software synthesizer
How to fix this issue:
Install the fixed driver on a system before/after installing Windows XP Service Pack 2.
Install steps:
(1) Unzip an attached file on your hard disk.
(2) Run SETUP.EXE
(3) Click the Next button.
(4) Choose "Yes, I want to restart my computer now" and click Finish.
A toshiba engineer told me that first of all I needed to install the old driver "5.12.01.3141", and it worked out ok, but still no sound.
And then he told me to install the version "6.13.10.2152", but this went wrong. I've got the error message "Driver was not installed".
I already tried lots of different drivers, including generic and yamaha drivers.
Please tell me a good solution for this issue if possible.
Thank you very much,
HugoHi Hugo
It seems today is your lucky day ;)
Thanks to Toshiba because the Toshiba computer knowledge base is a really useful area and I have found many useful document and solutions!!!
I found also a solution for your tiny issue ;)
As you said the problem is the Microsoft service pack 2. The sound driver makes some troubles after the installation of SP1 or SP2 and therefore the update is necessary!!!
Please take a look here:
Windows XP Service Pack 1a or Service Pack 2 incompatible with existing Yamaha sound driver
http://ftp.toshiba.ca/support/techsupport/tsbs/all/-TSB000805.htm
Good luck -
Not able to open Admin Tool in OBIEE 10.1.3.1 after the installation
Hi Friends,
After installing OBIEE (10.1.3.4.1 in Windows) i am not able to open Admin tool,when i click on the Administration it doesnt respond and i dont see any error message either.i have installed 10.1.3.1 several times before and i never faced this type of issue.I re-installed 4- 5 times and overwritten the existing s/w but still see the same issue.I am able to start the services and default RPD is working fine but not able to open the RPD and also i am able to launch the Catalog Manager.
I searched online but it didn't help me,please share if anyone has faced the similar issue before and found the resolution.i tried to launch the Admin tool from OracleBI\server\Bin after the installation but its not responding,seems issue with Admin Tool as i am able to launch other applications.
-
Getting error while applyin patch after R12 installation
I applying patch 8940108 after R12 installation. Pls. suggest what needs to be done.
Patch 8940108: Optional component(s) missing : [ oracle.precomp.lang, 11.1.0.7.0 ]
Prerequisite check "CheckRollbackable" on auto-rollback patches failed.
The details are:
Patch 7708340:
Archive Action: Source file "/db01/opt/oracle/product/11.1.0_egebrt/.patch_storage/7708340_Jan_28_2009_11_33_00/files/lib/libpls11.a/pkv.o" does not exist.
'oracle.rdbms, 11.1.0.7.0': Cannot update file '/db01/opt/oracle/product/11.1.0_egebrt/lib/libpls11.a' with '/pkv.o'
Archive Action: Source file "/db01/opt/oracle/product/11.1.0_egebrt/.patch_storage/7708340_Jan_28_2009_11_33_00/files/lib/libpls11.a/pkv.o" does not exist.
'oracle.rdbms.rman, 11.1.0.7.0': Cannot update file '/db01/opt/oracle/product/11.1.0_egebrt/lib/libpls11.a' with '/pkv.o'
ApplySession failed during prerequisite checks: Prerequisite check "CheckRollbackable" on auto-rollback patches failed.
System intact, OPatch will not attempt to restore the system
The following warnings have occurred during OPatch execution:
1) OUI-67078:Interim patch 8940108 is a superset of the patch(es) [ 7708340 ] in OH /db01/opt/oracle/product/11.1.0_egebrt
OPatch failed with error code 74Hi;
The following warnings have occurred during OPatch execution:
1) OUI-67078:Interim patch 8940108 is a superset of the patch(es) [ 7708340 ] in OH /db01/opt/oracle/product/11.1.0_egebrt
Its mean if you have patch 8940108 on your system already and if you try to apply patch 7708340 than you dont need to apply patch 7708340,coz patch 8940108 already cover patch 7708340.
You can try this
opatch -lsinventory|grep 8940108
Regard
Helios -
I have upgrade to Ios5 English version but after the installation was complete I found that the App Store and Itune are displayed in French version.
But the model no. of my iphone i.e A1303 is of 3GS as clearly mentioned here >> http://support.apple.com/kb/HT3939. Then how its become 3G.
-
Who kills your iPod after the installation of iPod updater?
Hello all,
First, sorry for my poor English. I am not a professional nor a technician and I could be wrong, so please correct me. There are many problems reported mainly from the PC users that their iPod can't be recognized nor mounted after the installation of the latest iPod updater. Most of them claimed that the iPod updater kills their beloved iPods. Before we jump to a conclusion, we must understand what is iPod, and how does the iPod update work.
I believe that iPod equals a basic computer and need a OS in order to communicate with the PC. Installation the Updater will format the Hard disk of the iPod and then install the simple OS, so if we open the iPod updater file, it will show a window with two buttons i.e. Restore and Update, an Update is to copy the latest OS over the old version, but the Restore will format the hard disk before it install the OS over it. And importantly, during this process, the iPod needs sufficient of power to complete the upgrade, however, the problem comes just after the format, and the PC's USB (only 2 will work not 1.1) does not supply the stable power,even some cases that iPod does not get charge in the half way of installatin (a proper installation, you will see a running bar showing on the iPod screen just after the format), so you can imagine a hard disk got format but only got an uncompleted OS, of course, the iPod would not get recognized and mounted, and do not manage to communicate with the computer. At this stage the iPod will show a Sad iPod icon, a folder with exclamaiton points or a battery charging icon.
So, what would you do when it reach at this stage, a Reset would not work, and you would not able to do the Restore as the iPod is totally unrecognized by the computer.
Therefore, is there anyway to solve this problem, in my opinion and from my past experience, the answer is "yes", the simple way is to put your iPod in Disk Mode, when it plug to the computer, it will show as an external Hard Disk, you must fix it by doing a format (RESTORE would not work at this stage as it still can't recognized and mounted), in Mac we can use "Disk Utility" but the XP would not allow you to do the format in FAT32. After the formatting, replug the iPod with the computer, then it can be mounted and allow you to do the RESTORE.
In addition, I find an interesting point is, if your iPod formatted with a Mac, you will have better chance to be mounted with a PC, even your iPod does not complete the process of the installation of the iPod updater, and a PC formatted iPod will be likely to be fixed by a Mac as well.
How should we do before the update of the lastest software, for the XP user please do the following:-
1. Go to the system restore and create a check point in order to revert back to the previous version of the iPod updater, or do the back up using the 3rd party software such as Ghost or Go Back.
2. To have a test and make sure the PC's USB works properly. You can use the iPod or a PDA, and just make sure it got charged.
3. Have your iPod a full charge before the installation of the iPod updater
So, who is the main killer for the iPod?
For further infomation please read the following link - which wrote by a groups of great people - thank you guys
http://discussions.info.apple.com/webx?128@@.68ae8668Hello Shanker Ghimire,
Please try run the following command:" devenv /resetuserdata " to have a test, it will clear all your settings.
By the way, have you ever got any error when install that Visual Studio SDK?
In case there are some unknown errors, I'd like to ask you for some logs. Please use
http://aka.ms/vscollect
to gather the installation logs. After using it, you will find vslogs.cab from %temp% folder. Please upload the file to
https://skydrive.live.com/
and share the link here.
Best regards
Barry
We are trying to better understand customer views on social support experience, so your participation in this interview project would be greatly appreciated if you have time. Thanks for helping make community forums a great place.
Click
HERE to participate the survey. -
after itunes installation an error message is shown, (itunes could not connect to the iphone, because it is locked with a passcode, you must enter your passcode on your iphone before it can be used with itunes)
Hi ..
Follow the instructions here > iOS: Forgotten passcode or device disabled after entering wrong passcode -
Oracle 10g RMAN is not working in RHEL 4 after fresh installation
I downloaded Oracle 10g R2 from OTN at home for self study.
I have problem with the RMAN after fresh installation Oracle 10g in RedHat Enterprise Linux AS 4. (x86)
Everything seems works fine, database mounted including EM, SQLPlus, iSQLPlus etc.
But when I attempt to execute RMAN command on the terminal, nothing is happening. No RMAN prompt, No error message!
I ran the "relink all" command but no helps.
Please advice.
Edited by: Surf888 on Nov 16, 2008 9:51 AMI guess you are a common Linux 'victim', you don't invoke Oracle's rman, but a Linux executable:
http://linux.about.com/cs/linux101/g/rman.htm
Check your PATH variable, you may move $ORACLE_HOME/bin to the top.
Werner -
I just updated my Iphone 3G and now it won´t work anymore. It wouldn´t even boot. It was just working for 3 sek. after the installation and now it shut itself down. Any help, please? Thankyou
I suspect you have a 2G iPod. Those can only go to iOS 4.2.1.
Identifying iPod models
iPod touch (3rd generation)
iPod touch (3rd generation) features a 3.5-inch (diagonal) widescreen multi-touch display and 32 GB or 64 GB flash drive. You can browse the web with Safari and watch YouTube videos with Wi-Fi. You can also search, preview, and buy songs from the iTunes Wi-Fi Music Store on iPod touch.
The iPod touch (3rd generation) can be distinguished from iPod touch (2nd generation) by looking at the back of the device. In the text below the engraving, look for the model number. iPod touch (2nd generation) is model A1288, and iPod touch (3rd generation) is model A1318.
You also said: "It also will not let me download any music onto it." What happens when you try to sync music to the iPod? -
My daughter's 13" late 2011 MacBook Pro has frozen (null sign displays) after Yosemite installation. I can, however, boot from a clone of my MacBook Air that is on an external drive. I reinstalled Yosemite on the MBP HD, but it still hangs in mid install. Despite the fact that I can boot from the external, could it be the RAM that's the problem? I'd happily put 8 GB in if it seems probable that would solve the problem. I've tried all the suggested procedures that I've seen posted here. Disk Utility, and my older version of DiskWarrior indicate the HD is OK. I have DiskWarrior 5 on order.
Boot the MBP with the OPTION key down. If successful, you should see two HDD icons, Select the recovery partition (on the right).
From the 4 option menu select Disk Utility.
Run Disk Utility>First Aid, Verify and Repair.
If the disk cannot be repaired, it will have to be replaced.
Ciao. -
Hi All
After new installation of WCC 11.1.1.8 on Microsoft server 2008 R2 SP1 64 bit EE UCM_server1 can’t start. (Please see trace below). WCC 11.1.1.7 run without issues on this environment.
Steps:
1. Installation of jrockit-jdk1.6.0_45-R28.2.7-4.1.0
2. Installation of WLS 10.3.6
3. Installation of WCC 11.1.1.8
4. Schema creation by RCU 11.1.1.8
5. Domain creation by config.cmd with AdminServer, UCM_server1, IBR_server1
6. Run Admin - (success)
7. Run NodeManager (optional) - (success)
8. Run UCM_server1 – failed
Still not works after patching MLR 1 for WCC 11.1.1.8 or upgrade from 11.1.1.7 .
From log files we can saw that problem caused by JniNativeOsUtils.dll file in “<Middleware Home>\Oracle_ECM1\ucm\idc\components\NativeOsUtils\lib\windows-amd64\7.2.1.1”
I replaced JniNativeOsUtils.dll with same file from 11.1.1.7 version and UCM_server1 starts work
I got errors during startup (syNativeOsUtilsNotLoaded and UnsatisfiedLinkError - you can foun them in trace below), but WCC up and works.
I also get error when trying to start SystemProperties or ComponentWithard utility:
Activation context generation failed for "C:\Oracle\MIDDLE~1\USER_P~1\domains\WCC_DO~1\ucm\cs\bin\SystemProperties.exe". Dependent Assembly Microsoft.VC80.MFC,processorArchitecture="amd64",publicKeyToken="1fc8b3b9a1e18e3b",type="win32",version="8.0.50727.762" could not be found. Please use sxstrace.exe for detailed diagnosis.
Any ideas?
Thanks
Leon
ERROR:
javax.servlet.ServletException: Could not start up IDC server deployment.
at idcservlet.ServletUtils.initializeContentServer(ServletUtils.java:1268)
at idcservlet.ServletUtils.startAndConfigureServer(ServletUtils.java:531)
at idcservlet.ServletUtils.initializeAllServers(ServletUtils.java:460)
at idcservlet.IdcFilter.initContentServer(IdcFilter.java:181)
at idcservlet.IdcFilter.init(IdcFilter.java:156)
at weblogic.servlet.internal.FilterManager$FilterInitAction.run(FilterManager.java:343)
at weblogic.security.acl.internal.AuthenticatedSubject.doAs(AuthenticatedSubject.java:321)
at weblogic.security.service.SecurityManager.runAs(SecurityManager.java:120)
at weblogic.servlet.internal.FilterManager.loadFilter(FilterManager.java:96)
at weblogic.servlet.internal.FilterManager.preloadFilters(FilterManager.java:57)
at weblogic.servlet.internal.WebAppServletContext.preloadResources(WebAppServletContext.java:1872)
at weblogic.servlet.internal.WebAppServletContext.start(WebAppServletContext.java:3154)
at weblogic.servlet.internal.WebAppModule.startContexts(WebAppModule.java:1518)
at weblogic.servlet.internal.WebAppModule.start(WebAppModule.java:484)
at weblogic.application.internal.flow.ModuleStateDriver$3.next(ModuleStateDriver.java:425)
at weblogic.application.utils.StateMachineDriver.nextState(StateMachineDriver.java:52)
at weblogic.application.internal.flow.ModuleStateDriver.start(ModuleStateDriver.java:119)
at weblogic.application.internal.flow.ScopedModuleDriver.start(ScopedModuleDriver.java:200)
at weblogic.application.internal.flow.ModuleListenerInvoker.start(ModuleListenerInvoker.java:247)
at weblogic.application.internal.flow.ModuleStateDriver$3.next(ModuleStateDriver.java:425)
at weblogic.application.utils.StateMachineDriver.nextState(StateMachineDriver.java:52)
at weblogic.application.internal.flow.ModuleStateDriver.start(ModuleStateDriver.java:119)
at weblogic.application.internal.flow.StartModulesFlow.activate(StartModulesFlow.java:27)
at weblogic.application.internal.BaseDeployment$2.next(BaseDeployment.java:671)
at weblogic.application.utils.StateMachineDriver.nextState(StateMachineDriver.java:52)
at weblogic.application.internal.BaseDeployment.activate(BaseDeployment.java:212)
at weblogic.application.internal.EarDeployment.activate(EarDeployment.java:59)
at weblogic.application.internal.DeploymentStateChecker.activate(DeploymentStateChecker.java:161)
at weblogic.deploy.internal.targetserver.AppContainerInvoker.activate(AppContainerInvoker.java:79)
at weblogic.deploy.internal.targetserver.BasicDeployment.activate(BasicDeployment.java:184)
at weblogic.deploy.internal.targetserver.BasicDeployment.activateFromServerLifecycle(BasicDeployment.java:361)
at weblogic.management.deploy.internal.DeploymentAdapter$1.doActivate(DeploymentAdapter.java:51)
at weblogic.management.deploy.internal.DeploymentAdapter.activate(DeploymentAdapter.java:200)
at weblogic.management.deploy.internal.AppTransition$2.transitionApp(AppTransition.java:30)
at weblogic.management.deploy.internal.ConfiguredDeployments.transitionApps(ConfiguredDeployments.java:240)
at weblogic.management.deploy.internal.ConfiguredDeployments.activate(ConfiguredDeployments.java:169)
at weblogic.management.deploy.internal.ConfiguredDeployments.deploy(ConfiguredDeployments.java:123)
at weblogic.management.deploy.internal.DeploymentServerService.resume(DeploymentServerService.java:180)
at weblogic.management.deploy.internal.DeploymentServerService.start(DeploymentServerService.java:96)
at weblogic.t3.srvr.SubsystemRequest.run(SubsystemRequest.java:64)
at weblogic.work.ExecuteThread.execute(ExecuteThread.java:256)
at weblogic.work.ExecuteThread.run(ExecuteThread.java:221)
Caused By: java.io.IOException: csServletFailedToFullyInitialize
at intradoc.idcwls.IdcIntegrateWrapper.initializeServer(IdcIntegrateWrapper.java:139)
at sun.reflect.NativeMethodAccessorImpl.invoke0(Native Method)
at sun.reflect.NativeMethodAccessorImpl.invoke(NativeMethodAccessorImpl.java:39)
at sun.reflect.DelegatingMethodAccessorImpl.invoke(DelegatingMethodAccessorImpl.java:25)
at java.lang.reflect.Method.invoke(Method.java:597)
at idcservlet.common.IdcMethodHolder.invokeMethod(IdcMethodHolder.java:87)
at idcservlet.common.ClassHelperUtils.executeMethodEx(ClassHelperUtils.java:305)
at idcservlet.common.ClassHelperUtils.executeMethodWithArgs(ClassHelperUtils.java:278)
at idcservlet.ServletUtils.initializeContentServer(ServletUtils.java:1257)
at idcservlet.ServletUtils.startAndConfigureServer(ServletUtils.java:531)
at idcservlet.ServletUtils.initializeAllServers(ServletUtils.java:460)
at idcservlet.IdcFilter.initContentServer(IdcFilter.java:181)
at idcservlet.IdcFilter.init(IdcFilter.java:156)
at weblogic.servlet.internal.FilterManager$FilterInitAction.run(FilterManager.java:343)
at weblogic.security.acl.internal.AuthenticatedSubject.doAs(AuthenticatedSubject.java:321)
at weblogic.security.service.SecurityManager.runAs(SecurityManager.java:120)
at weblogic.servlet.internal.FilterManager.loadFilter(FilterManager.java:96)
at weblogic.servlet.internal.FilterManager.preloadFilters(FilterManager.java:57)
at weblogic.servlet.internal.WebAppServletContext.preloadResources(WebAppServletContext.java:1872)
at weblogic.servlet.internal.WebAppServletContext.start(WebAppServletContext.java:3154)
at weblogic.servlet.internal.WebAppModule.startContexts(WebAppModule.java:1518)
at weblogic.servlet.internal.WebAppModule.start(WebAppModule.java:484)
at weblogic.application.internal.flow.ModuleStateDriver$3.next(ModuleStateDriver.java:425)
at weblogic.application.utils.StateMachineDriver.nextState(StateMachineDriver.java:52)
at weblogic.application.internal.flow.ModuleStateDriver.start(ModuleStateDriver.java:119)
at weblogic.application.internal.flow.ScopedModuleDriver.start(ScopedModuleDriver.java:200)
at weblogic.application.internal.flow.ModuleListenerInvoker.start(ModuleListenerInvoker.java:247)
at weblogic.application.internal.flow.ModuleStateDriver$3.next(ModuleStateDriver.java:425)
at weblogic.application.utils.StateMachineDriver.nextState(StateMachineDriver.java:52)
at weblogic.application.internal.flow.ModuleStateDriver.start(ModuleStateDriver.java:119)
at weblogic.application.internal.flow.StartModulesFlow.activate(StartModulesFlow.java:27)
at weblogic.application.internal.BaseDeployment$2.next(BaseDeployment.java:671)
at weblogic.application.utils.StateMachineDriver.nextState(StateMachineDriver.java:52)
at weblogic.application.internal.BaseDeployment.activate(BaseDeployment.java:212)
at weblogic.application.internal.EarDeployment.activate(EarDeployment.java:59)
at weblogic.application.internal.DeploymentStateChecker.activate(DeploymentStateChecker.java:161)
at weblogic.deploy.internal.targetserver.AppContainerInvoker.activate(AppContainerInvoker.java:79)
at weblogic.deploy.internal.targetserver.BasicDeployment.activate(BasicDeployment.java:184)
at weblogic.deploy.internal.targetserver.BasicDeployment.activateFromServerLifecycle(BasicDeployment.java:361)
at weblogic.management.deploy.internal.DeploymentAdapter$1.doActivate(DeploymentAdapter.java:51)
at weblogic.management.deploy.internal.DeploymentAdapter.activate(DeploymentAdapter.java:200)
at weblogic.management.deploy.internal.AppTransition$2.transitionApp(AppTransition.java:30)
at weblogic.management.deploy.internal.ConfiguredDeployments.transitionApps(ConfiguredDeployments.java:240)
at weblogic.management.deploy.internal.ConfiguredDeployments.activate(ConfiguredDeployments.java:169)
at weblogic.management.deploy.internal.ConfiguredDeployments.deploy(ConfiguredDeployments.java:123)
at weblogic.management.deploy.internal.DeploymentServerService.resume(DeploymentServerService.java:180)
at weblogic.management.deploy.internal.DeploymentServerService.start(DeploymentServerService.java:96)
at weblogic.t3.srvr.SubsystemRequest.run(SubsystemRequest.java:64)
at weblogic.work.ExecuteThread.execute(ExecuteThread.java:256)
at weblogic.work.ExecuteThread.run(ExecuteThread.java:221)
Caused By: intradoc.common.ServiceException:
at intradoc.server.IdcServerManager.init(IdcServerManager.java:252)
at intradoc.idcwls.IdcServletRequestUtils.initializeServer(IdcServletRequestUtils.java:627)
at intradoc.idcwls.IdcServletRequestUtils.initializeServer(IdcServletRequestUtils.java:457)
at intradoc.idcwls.IdcIntegrateWrapper.initializeServer(IdcIntegrateWrapper.java:104)
at sun.reflect.NativeMethodAccessorImpl.invoke0(Native Method)
at sun.reflect.NativeMethodAccessorImpl.invoke(NativeMethodAccessorImpl.java:39)
at sun.reflect.DelegatingMethodAccessorImpl.invoke(DelegatingMethodAccessorImpl.java:25)
at java.lang.reflect.Method.invoke(Method.java:597)
at idcservlet.common.IdcMethodHolder.invokeMethod(IdcMethodHolder.java:88)
at idcservlet.common.ClassHelperUtils.executeMethodEx(ClassHelperUtils.java:305)
at idcservlet.common.ClassHelperUtils.executeMethodWithArgs(ClassHelperUtils.java:278)
at idcservlet.ServletUtils.initializeContentServer(ServletUtils.java:1259)
at idcservlet.ServletUtils.startAndConfigureServer(ServletUtils.java:531)
at idcservlet.ServletUtils.initializeAllServers(ServletUtils.java:460)
at idcservlet.IdcFilter.initContentServer(IdcFilter.java:181)
at idcservlet.IdcFilter.init(IdcFilter.java:156)
at weblogic.servlet.internal.FilterManager$FilterInitAction.run(FilterManager.java:343)
at weblogic.security.acl.internal.AuthenticatedSubject.doAs(AuthenticatedSubject.java:321)
at weblogic.security.service.SecurityManager.runAs(SecurityManager.java:120)
at weblogic.servlet.internal.FilterManager.loadFilter(FilterManager.java:96)
at weblogic.servlet.internal.FilterManager.preloadFilters(FilterManager.java:57)
at weblogic.servlet.internal.WebAppServletContext.preloadResources(WebAppServletContext.java:1874)
at weblogic.servlet.internal.WebAppServletContext.start(WebAppServletContext.java:3155)
at weblogic.servlet.internal.WebAppModule.startContexts(WebAppModule.java:1518)
at weblogic.servlet.internal.WebAppModule.start(WebAppModule.java:487)
at weblogic.application.internal.flow.ModuleStateDriver$3.next(ModuleStateDriver.java:427)
at weblogic.application.utils.StateMachineDriver.nextState(StateMachineDriver.java:52)
at weblogic.application.internal.flow.ModuleStateDriver.start(ModuleStateDriver.java:119)
at weblogic.application.internal.flow.ScopedModuleDriver.start(ScopedModuleDriver.java:201)
at weblogic.application.internal.flow.ModuleListenerInvoker.start(ModuleListenerInvoker.java:249)
at weblogic.application.internal.flow.ModuleStateDriver$3.next(ModuleStateDriver.java:427)
at weblogic.application.utils.StateMachineDriver.nextState(StateMachineDriver.java:52)
at weblogic.application.internal.flow.ModuleStateDriver.start(ModuleStateDriver.java:119)
at weblogic.application.internal.flow.StartModulesFlow.activate(StartModulesFlow.java:28)
at weblogic.application.internal.BaseDeployment$2.next(BaseDeployment.java:672)
at weblogic.application.utils.StateMachineDriver.nextState(StateMachineDriver.java:52)
at weblogic.application.internal.BaseDeployment.activate(BaseDeployment.java:212)
at weblogic.application.internal.EarDeployment.activate(EarDeployment.java:59)
at weblogic.application.internal.DeploymentStateChecker.activate(DeploymentStateChecker.java:161)
at weblogic.deploy.internal.targetserver.AppContainerInvoker.activate(AppContainerInvoker.java:79)
at weblogic.deploy.internal.targetserver.BasicDeployment.activate(BasicDeployment.java:184)
at weblogic.deploy.internal.targetserver.BasicDeployment.activateFromServerLifecycle(BasicDeployment.java:361)
at weblogic.management.deploy.internal.DeploymentAdapter$1.doActivate(DeploymentAdapter.java:52)
at weblogic.management.deploy.internal.DeploymentAdapter.activate(DeploymentAdapter.java:200)
at weblogic.management.deploy.internal.AppTransition$2.transitionApp(AppTransition.java:31)
at weblogic.management.deploy.internal.ConfiguredDeployments.transitionApps(ConfiguredDeployments.java:240)
at weblogic.management.deploy.internal.ConfiguredDeployments.activate(ConfiguredDeployments.java:170)
at weblogic.management.deploy.internal.ConfiguredDeployments.deploy(ConfiguredDeployments.java:124)
at weblogic.management.deploy.internal.DeploymentServerService.resume(DeploymentServerService.java:181)
at weblogic.management.deploy.internal.DeploymentServerService.start(DeploymentServerService.java:97)
at weblogic.t3.srvr.SubsystemRequest.run(SubsystemRequest.java:64)
at weblogic.work.ExecuteThread.execute(ExecuteThread.java:256)
at weblogic.work.ExecuteThread.run(ExecuteThread.java:221)
Caused By: intradoc.data.DataException: !Install aborted.
at intradoc.server.IdcInstallInfo.continueEarlyInstall(IdcInstallInfo.java:554)
at intradoc.server.IdcSystemConfig.initConfigEarly(IdcSystemConfig.java:205)
at intradoc.server.IdcSystemConfig.loadInitialConfig(IdcSystemConfig.java:323)
at intradoc.server.IdcServerManager.init(IdcServerManager.java:100)
at intradoc.idcwls.IdcServletRequestUtils.initializeServer(IdcServletRequestUtils.java:627)
at intradoc.idcwls.IdcServletRequestUtils.initializeServer(IdcServletRequestUtils.java:457)
at intradoc.idcwls.IdcIntegrateWrapper.initializeServer(IdcIntegrateWrapper.java:104)
at sun.reflect.NativeMethodAccessorImpl.invoke0(Native Method)
at sun.reflect.NativeMethodAccessorImpl.invoke(NativeMethodAccessorImpl.java:39)
at sun.reflect.DelegatingMethodAccessorImpl.invoke(DelegatingMethodAccessorImpl.java:25)
at java.lang.reflect.Method.invoke(Method.java:597)
at idcservlet.common.IdcMethodHolder.invokeMethod(IdcMethodHolder.java:88)
at idcservlet.common.ClassHelperUtils.executeMethodEx(ClassHelperUtils.java:305)
at idcservlet.common.ClassHelperUtils.executeMethodWithArgs(ClassHelperUtils.java:278)
at idcservlet.ServletUtils.initializeContentServer(ServletUtils.java:1259)
at idcservlet.ServletUtils.startAndConfigureServer(ServletUtils.java:531)
at idcservlet.ServletUtils.initializeAllServers(ServletUtils.java:460)
at idcservlet.IdcFilter.initContentServer(IdcFilter.java:181)
at idcservlet.IdcFilter.init(IdcFilter.java:156)
at weblogic.servlet.internal.FilterManager$FilterInitAction.run(FilterManager.java:343)
at weblogic.security.acl.internal.AuthenticatedSubject.doAs(AuthenticatedSubject.java:321)
at weblogic.security.service.SecurityManager.runAs(SecurityManager.java:120)
at weblogic.servlet.internal.FilterManager.loadFilter(FilterManager.java:96)
at weblogic.servlet.internal.FilterManager.preloadFilters(FilterManager.java:57)
at weblogic.servlet.internal.WebAppServletContext.preloadResources(WebAppServletContext.java:1874)
at weblogic.servlet.internal.WebAppServletContext.start(WebAppServletContext.java:3155)
at weblogic.servlet.internal.WebAppModule.startContexts(WebAppModule.java:1518)
at weblogic.servlet.internal.WebAppModule.start(WebAppModule.java:487)
at weblogic.application.internal.flow.ModuleStateDriver$3.next(ModuleStateDriver.java:427)
at weblogic.application.utils.StateMachineDriver.nextState(StateMachineDriver.java:52)
at weblogic.application.internal.flow.ModuleStateDriver.start(ModuleStateDriver.java:119)
at weblogic.application.internal.flow.ScopedModuleDriver.start(ScopedModuleDriver.java:201)
at weblogic.application.internal.flow.ModuleListenerInvoker.start(ModuleListenerInvoker.java:249)
at weblogic.application.internal.flow.ModuleStateDriver$3.next(ModuleStateDriver.java:427)
at weblogic.application.utils.StateMachineDriver.nextState(StateMachineDriver.java:52)
at weblogic.application.internal.flow.ModuleStateDriver.start(ModuleStateDriver.java:119)
at weblogic.application.internal.flow.StartModulesFlow.activate(StartModulesFlow.java:28)
at weblogic.application.internal.BaseDeployment$2.next(BaseDeployment.java:672)
at weblogic.application.utils.StateMachineDriver.nextState(StateMachineDriver.java:52)
at weblogic.application.internal.BaseDeployment.activate(BaseDeployment.java:212)
at weblogic.application.internal.EarDeployment.activate(EarDeployment.java:59)
at weblogic.application.internal.DeploymentStateChecker.activate(DeploymentStateChecker.java:161)
at weblogic.deploy.internal.targetserver.AppContainerInvoker.activate(AppContainerInvoker.java:79)
at weblogic.deploy.internal.targetserver.BasicDeployment.activate(BasicDeployment.java:184)
at weblogic.deploy.internal.targetserver.BasicDeployment.activateFromServerLifecycle(BasicDeployment.java:361)
at weblogic.management.deploy.internal.DeploymentAdapter$1.doActivate(DeploymentAdapter.java:52)
at weblogic.management.deploy.internal.DeploymentAdapter.activate(DeploymentAdapter.java:200)
at weblogic.management.deploy.internal.AppTransition$2.transitionApp(AppTransition.java:31)
at weblogic.management.deploy.internal.ConfiguredDeployments.transitionApps(ConfiguredDeployments.java:240)
at weblogic.management.deploy.internal.ConfiguredDeployments.activate(ConfiguredDeployments.java:170)
at weblogic.management.deploy.internal.ConfiguredDeployments.deploy(ConfiguredDeployments.java:124)
at weblogic.management.deploy.internal.DeploymentServerService.resume(DeploymentServerService.java:181)
at weblogic.management.deploy.internal.DeploymentServerService.start(DeploymentServerService.java:97)
at weblogic.t3.srvr.SubsystemRequest.run(SubsystemRequest.java:64)
at weblogic.work.ExecuteThread.execute(ExecuteThread.java:256)
at weblogic.work.ExecuteThread.run(ExecuteThread.java:221)
Caused By: intradoc.common.ServiceException: !csInitSecurityError
at intradoc.conversion.SecurityObjects.init(SecurityObjects.java:140)
at intradoc.conversion.CryptoPasswordUtils.initSecurityObjects(CryptoPasswordUtils.java:75)
at intradoc.conversion.CryptoPasswordUtils.loadPasswordManagement(CryptoPasswordUtils.java:136)
at intradoc.server.IdcInstallInfo.buildPasswordInfo(IdcInstallInfo.java:850)
at intradoc.server.IdcInstallInfo.createConfigAndPasswordFiles(IdcInstallInfo.java:573)
at intradoc.server.IdcInstallInfo.continueEarlyInstall(IdcInstallInfo.java:548)
at intradoc.server.IdcSystemConfig.initConfigEarly(IdcSystemConfig.java:205)
at intradoc.server.IdcSystemConfig.loadInitialConfig(IdcSystemConfig.java:328)
at intradoc.server.IdcServerManager.init(IdcServerManager.java:101)
at intradoc.idcwls.IdcServletRequestUtils.initializeServer(IdcServletRequestUtils.java:627)
at intradoc.idcwls.IdcServletRequestUtils.initializeServer(IdcServletRequestUtils.java:457)
at intradoc.idcwls.IdcIntegrateWrapper.initializeServer(IdcIntegrateWrapper.java:104)
at sun.reflect.NativeMethodAccessorImpl.invoke0(Native Method)
at sun.reflect.NativeMethodAccessorImpl.invoke(NativeMethodAccessorImpl.java:39)
at sun.reflect.DelegatingMethodAccessorImpl.invoke(DelegatingMethodAccessorImpl.java:25)
at java.lang.reflect.Method.invoke(Method.java:597)
at idcservlet.common.IdcMethodHolder.invokeMethod(IdcMethodHolder.java:88)
at idcservlet.common.ClassHelperUtils.executeMethodEx(ClassHelperUtils.java:305)
at idcservlet.common.ClassHelperUtils.executeMethodWithArgs(ClassHelperUtils.java:278)
at idcservlet.ServletUtils.initializeContentServer(ServletUtils.java:1259)
at idcservlet.ServletUtils.startAndConfigureServer(ServletUtils.java:531)
at idcservlet.ServletUtils.initializeAllServers(ServletUtils.java:460)
at idcservlet.IdcFilter.initContentServer(IdcFilter.java:181)
at idcservlet.IdcFilter.init(IdcFilter.java:156)
at weblogic.servlet.internal.FilterManager$FilterInitAction.run(FilterManager.java:343)
at weblogic.security.acl.internal.AuthenticatedSubject.doAs(AuthenticatedSubject.java:321)
at weblogic.security.service.SecurityManager.runAs(SecurityManager.java:120)
at weblogic.servlet.internal.FilterManager.loadFilter(FilterManager.java:96)
at weblogic.servlet.internal.FilterManager.preloadFilters(FilterManager.java:57)
at weblogic.servlet.internal.WebAppServletContext.preloadResources(WebAppServletContext.java:1874)
at weblogic.servlet.internal.WebAppServletContext.start(WebAppServletContext.java:3155)
at weblogic.servlet.internal.WebAppModule.startContexts(WebAppModule.java:1518)
at weblogic.servlet.internal.WebAppModule.start(WebAppModule.java:487)
at weblogic.application.internal.flow.ModuleStateDriver$3.next(ModuleStateDriver.java:427)
at weblogic.application.utils.StateMachineDriver.nextState(StateMachineDriver.java:52)
at weblogic.application.internal.flow.ModuleStateDriver.start(ModuleStateDriver.java:119)
at weblogic.application.internal.flow.ScopedModuleDriver.start(ScopedModuleDriver.java:201)
at weblogic.application.internal.flow.ModuleListenerInvoker.start(ModuleListenerInvoker.java:249)
at weblogic.application.internal.flow.ModuleStateDriver$3.next(ModuleStateDriver.java:427)
at weblogic.application.utils.StateMachineDriver.nextState(StateMachineDriver.java:52)
at weblogic.application.internal.flow.ModuleStateDriver.start(ModuleStateDriver.java:119)
at weblogic.application.internal.flow.StartModulesFlow.activate(StartModulesFlow.java:28)
at weblogic.application.internal.BaseDeployment$2.next(BaseDeployment.java:672)
at weblogic.application.utils.StateMachineDriver.nextState(StateMachineDriver.java:52)
at weblogic.application.internal.BaseDeployment.activate(BaseDeployment.java:212)
at weblogic.application.internal.EarDeployment.activate(EarDeployment.java:59)
at weblogic.application.internal.DeploymentStateChecker.activate(DeploymentStateChecker.java:161)
at weblogic.deploy.internal.targetserver.AppContainerInvoker.activate(AppContainerInvoker.java:79)
at weblogic.deploy.internal.targetserver.BasicDeployment.activate(BasicDeployment.java:184)
at weblogic.deploy.internal.targetserver.BasicDeployment.activateFromServerLifecycle(BasicDeployment.java:361)
at weblogic.management.deploy.internal.DeploymentAdapter$1.doActivate(DeploymentAdapter.java:52)
at weblogic.management.deploy.internal.DeploymentAdapter.activate(DeploymentAdapter.java:200)
at weblogic.management.deploy.internal.AppTransition$2.transitionApp(AppTransition.java:31)
at weblogic.management.deploy.internal.ConfiguredDeployments.transitionApps(ConfiguredDeployments.java:240)
at weblogic.management.deploy.internal.ConfiguredDeployments.activate(ConfiguredDeployments.java:170)
at weblogic.management.deploy.internal.ConfiguredDeployments.deploy(ConfiguredDeployments.java:124)
at weblogic.management.deploy.internal.DeploymentServerService.resume(DeploymentServerService.java:181)
at weblogic.management.deploy.internal.DeploymentServerService.start(DeploymentServerService.java:97)
at weblogic.t3.srvr.SubsystemRequest.run(SubsystemRequest.java:64)
at weblogic.work.ExecuteThread.execute(ExecuteThread.java:256)
at weblogic.work.ExecuteThread.run(ExecuteThread.java:221)
Caused By: intradoc.common.ServiceException: !syFileUtilsUnableToCreateSpecifiedDir,C:/Oracle/MIDDLE~1/USER_P~1/domains/WCC_DO~1/ucm/cs/config/private
at intradoc.common.FileUtils.checkOrCreateDirectory(FileUtils.java:570)
at intradoc.conversion.StandardKeyLoader.init(StandardKeyLoader.java:36)
at idc.conversion.jps.CSFKeyLoader.init(CSFKeyLoader.java:47)
at intradoc.conversion.SecurityObjects.init(SecurityObjects.java:132)
at intradoc.conversion.CryptoPasswordUtils.initSecurityObjects(CryptoPasswordUtils.java:76)
at intradoc.conversion.CryptoPasswordUtils.loadPasswordManagement(CryptoPasswordUtils.java:136)
at intradoc.server.IdcInstallInfo.buildPasswordInfo(IdcInstallInfo.java:850)
at intradoc.server.IdcInstallInfo.createConfigAndPasswordFiles(IdcInstallInfo.java:574)
at intradoc.server.IdcInstallInfo.continueEarlyInstall(IdcInstallInfo.java:548)
at intradoc.server.IdcSystemConfig.initConfigEarly(IdcSystemConfig.java:205)
at intradoc.server.IdcSystemConfig.loadInitialConfig(IdcSystemConfig.java:328)
at intradoc.server.IdcServerManager.init(IdcServerManager.java:101)
at intradoc.idcwls.IdcServletRequestUtils.initializeServer(IdcServletRequestUtils.java:627)
at intradoc.idcwls.IdcServletRequestUtils.initializeServer(IdcServletRequestUtils.java:457)
at intradoc.idcwls.IdcIntegrateWrapper.initializeServer(IdcIntegrateWrapper.java:104)
at sun.reflect.NativeMethodAccessorImpl.invoke0(Native Method)
at sun.reflect.NativeMethodAccessorImpl.invoke(NativeMethodAccessorImpl.java:39)
at sun.reflect.DelegatingMethodAccessorImpl.invoke(DelegatingMethodAccessorImpl.java:25)
at java.lang.reflect.Method.invoke(Method.java:597)
at idcservlet.common.IdcMethodHolder.invokeMethod(IdcMethodHolder.java:88)
at idcservlet.common.ClassHelperUtils.executeMethodEx(ClassHelperUtils.java:305)
at idcservlet.common.ClassHelperUtils.executeMethodWithArgs(ClassHelperUtils.java:278)
at idcservlet.ServletUtils.initializeContentServer(ServletUtils.java:1259)
at idcservlet.ServletUtils.startAndConfigureServer(ServletUtils.java:531)
at idcservlet.ServletUtils.initializeAllServers(ServletUtils.java:460)
at idcservlet.IdcFilter.initContentServer(IdcFilter.java:181)
at idcservlet.IdcFilter.init(IdcFilter.java:156)
at weblogic.servlet.internal.FilterManager$FilterInitAction.run(FilterManager.java:343)
at weblogic.security.acl.internal.AuthenticatedSubject.doAs(AuthenticatedSubject.java:321)
at weblogic.security.service.SecurityManager.runAs(SecurityManager.java:120)
at weblogic.servlet.internal.FilterManager.loadFilter(FilterManager.java:96)
at weblogic.servlet.internal.FilterManager.preloadFilters(FilterManager.java:57)
at weblogic.servlet.internal.WebAppServletContext.preloadResources(WebAppServletContext.java:1874)
at weblogic.servlet.internal.WebAppServletContext.start(WebAppServletContext.java:3155)
at weblogic.servlet.internal.WebAppModule.startContexts(WebAppModule.java:1518)
at weblogic.servlet.internal.WebAppModule.start(WebAppModule.java:487)
at weblogic.application.internal.flow.ModuleStateDriver$3.next(ModuleStateDriver.java:427)
at weblogic.application.utils.StateMachineDriver.nextState(StateMachineDriver.java:52)
at weblogic.application.internal.flow.ModuleStateDriver.start(ModuleStateDriver.java:119)
at weblogic.application.internal.flow.ScopedModuleDriver.start(ScopedModuleDriver.java:201)
at weblogic.application.internal.flow.ModuleListenerInvoker.start(ModuleListenerInvoker.java:249)
at weblogic.application.internal.flow.ModuleStateDriver$3.next(ModuleStateDriver.java:427)
at weblogic.application.utils.StateMachineDriver.nextState(StateMachineDriver.java:52)
at weblogic.application.internal.flow.ModuleStateDriver.start(ModuleStateDriver.java:119)
at weblogic.application.internal.flow.StartModulesFlow.activate(StartModulesFlow.java:28)
at weblogic.application.internal.BaseDeployment$2.next(BaseDeployment.java:672)
at weblogic.application.utils.StateMachineDriver.nextState(StateMachineDriver.java:52)
at weblogic.application.internal.BaseDeployment.activate(BaseDeployment.java:212)
at weblogic.application.internal.EarDeployment.activate(EarDeployment.java:59)
at weblogic.application.internal.DeploymentStateChecker.activate(DeploymentStateChecker.java:161)
at weblogic.deploy.internal.targetserver.AppContainerInvoker.activate(AppContainerInvoker.java:79)
at weblogic.deploy.internal.targetserver.BasicDeployment.activate(BasicDeployment.java:184)
at weblogic.deploy.internal.targetserver.BasicDeployment.activateFromServerLifecycle(BasicDeployment.java:361)
at weblogic.management.deploy.internal.DeploymentAdapter$1.doActivate(DeploymentAdapter.java:52)
at weblogic.management.deploy.internal.DeploymentAdapter.activate(DeploymentAdapter.java:200)
at weblogic.management.deploy.internal.AppTransition$2.transitionApp(AppTransition.java:31)
at weblogic.management.deploy.internal.ConfiguredDeployments.transitionApps(ConfiguredDeployments.java:240)
at weblogic.management.deploy.internal.ConfiguredDeployments.activate(ConfiguredDeployments.java:170)
at weblogic.management.deploy.internal.ConfiguredDeployments.deploy(ConfiguredDeployments.java:124)
at weblogic.management.deploy.internal.DeploymentServerService.resume(DeploymentServerService.java:181)
at weblogic.management.deploy.internal.DeploymentServerService.start(DeploymentServerService.java:97)
at weblogic.t3.srvr.SubsystemRequest.run(SubsystemRequest.java:64)
at weblogic.work.ExecuteThread.execute(ExecuteThread.java:256)
at weblogic.work.ExecuteThread.run(ExecuteThread.java:221)
Caused By: java.lang.AssertionError: !syNativeOsUtilsNotLoaded
at intradoc.common.NativeOsUtilsBase.doLoad(NativeOsUtilsBase.java:452)
at intradoc.common.NativeOsUtilsBase.<init>(NativeOsUtilsBase.java:360)
at intradoc.common.NativeOsUtils.<init>(NativeOsUtils.java:28)
at intradoc.common.FileUtils.checkOrCreateDirectory(FileUtils.java:566)
at intradoc.conversion.StandardKeyLoader.init(StandardKeyLoader.java:36)
at idc.conversion.jps.CSFKeyLoader.init(CSFKeyLoader.java:47)
at intradoc.conversion.SecurityObjects.init(SecurityObjects.java:132)
at intradoc.conversion.CryptoPasswordUtils.initSecurityObjects(CryptoPasswordUtils.java:75)
at intradoc.conversion.CryptoPasswordUtils.loadPasswordManagement(CryptoPasswordUtils.java:136)
at intradoc.server.IdcInstallInfo.buildPasswordInfo(IdcInstallInfo.java:850)
at intradoc.server.IdcInstallInfo.createConfigAndPasswordFiles(IdcInstallInfo.java:573)
at intradoc.server.IdcInstallInfo.continueEarlyInstall(IdcInstallInfo.java:548)
at intradoc.server.IdcSystemConfig.initConfigEarly(IdcSystemConfig.java:205)
at intradoc.server.IdcSystemConfig.loadInitialConfig(IdcSystemConfig.java:323)
at intradoc.server.IdcServerManager.init(IdcServerManager.java:100)
at intradoc.idcwls.IdcServletRequestUtils.initializeServer(IdcServletRequestUtils.java:626)
at intradoc.idcwls.IdcServletRequestUtils.initializeServer(IdcServletRequestUtils.java:457)
at intradoc.idcwls.IdcIntegrateWrapper.initializeServer(IdcIntegrateWrapper.java:103)
at sun.reflect.NativeMethodAccessorImpl.invoke0(Native Method)
at sun.reflect.NativeMethodAccessorImpl.invoke(NativeMethodAccessorImpl.java:39)
at sun.reflect.DelegatingMethodAccessorImpl.invoke(DelegatingMethodAccessorImpl.java:25)
at java.lang.reflect.Method.invoke(Method.java:597)
at idcservlet.common.IdcMethodHolder.invokeMethod(IdcMethodHolder.java:87)
at idcservlet.common.ClassHelperUtils.executeMethodEx(ClassHelperUtils.java:305)
at idcservlet.common.ClassHelperUtils.executeMethodWithArgs(ClassHelperUtils.java:278)
at idcservlet.ServletUtils.initializeContentServer(ServletUtils.java:1257)
at idcservlet.ServletUtils.startAndConfigureServer(ServletUtils.java:531)
at idcservlet.ServletUtils.initializeAllServers(ServletUtils.java:460)
at idcservlet.IdcFilter.initContentServer(IdcFilter.java:181)
at idcservlet.IdcFilter.init(IdcFilter.java:156)
at weblogic.servlet.internal.FilterManager$FilterInitAction.run(FilterManager.java:343)
at weblogic.security.acl.internal.AuthenticatedSubject.doAs(AuthenticatedSubject.java:321)
at weblogic.security.service.SecurityManager.runAs(SecurityManager.java:120)
at weblogic.servlet.internal.FilterManager.loadFilter(FilterManager.java:96)
at weblogic.servlet.internal.FilterManager.preloadFilters(FilterManager.java:57)
at weblogic.servlet.internal.WebAppServletContext.preloadResources(WebAppServletContext.java:1872)
at weblogic.servlet.internal.WebAppServletContext.start(WebAppServletContext.java:3154)
at weblogic.servlet.internal.WebAppModule.startContexts(WebAppModule.java:1518)
at weblogic.servlet.internal.WebAppModule.start(WebAppModule.java:484)
at weblogic.application.internal.flow.ModuleStateDriver$3.next(ModuleStateDriver.java:425)
at weblogic.application.utils.StateMachineDriver.nextState(StateMachineDriver.java:52)
at weblogic.application.internal.flow.ModuleStateDriver.start(ModuleStateDriver.java:119)
at weblogic.application.internal.flow.ScopedModuleDriver.start(ScopedModuleDriver.java:200)
at weblogic.application.internal.flow.ModuleListenerInvoker.start(ModuleListenerInvoker.java:247)
at weblogic.application.internal.flow.ModuleStateDriver$3.next(ModuleStateDriver.java:425)
at weblogic.application.utils.StateMachineDriver.nextState(StateMachineDriver.java:52)
at weblogic.application.internal.flow.ModuleStateDriver.start(ModuleStateDriver.java:119)
at weblogic.application.internal.flow.StartModulesFlow.activate(StartModulesFlow.java:27)
at weblogic.application.internal.BaseDeployment$2.next(BaseDeployment.java:671)
at weblogic.application.utils.StateMachineDriver.nextState(StateMachineDriver.java:52)
at weblogic.application.internal.BaseDeployment.activate(BaseDeployment.java:212)
at weblogic.application.internal.EarDeployment.activate(EarDeployment.java:59)
at weblogic.application.internal.DeploymentStateChecker.activate(DeploymentStateChecker.java:161)
at weblogic.deploy.internal.targetserver.AppContainerInvoker.activate(AppContainerInvoker.java:79)
at weblogic.deploy.internal.targetserver.BasicDeployment.activate(BasicDeployment.java:184)
at weblogic.deploy.internal.targetserver.BasicDeployment.activateFromServerLifecycle(BasicDeployment.java:361)
at weblogic.management.deploy.internal.DeploymentAdapter$1.doActivate(DeploymentAdapter.java:51)
at weblogic.management.deploy.internal.DeploymentAdapter.activate(DeploymentAdapter.java:200)
at weblogic.management.deploy.internal.AppTransition$2.transitionApp(AppTransition.java:30)
at weblogic.management.deploy.internal.ConfiguredDeployments.transitionApps(ConfiguredDeployments.java:240)
at weblogic.management.deploy.internal.ConfiguredDeployments.activate(ConfiguredDeployments.java:169)
at weblogic.management.deploy.internal.ConfiguredDeployments.deploy(ConfiguredDeployments.java:123)
at weblogic.management.deploy.internal.DeploymentServerService.resume(DeploymentServerService.java:180)
at weblogic.management.deploy.internal.DeploymentServerService.start(DeploymentServerService.java:96)
at weblogic.t3.srvr.SubsystemRequest.run(SubsystemRequest.java:64)
at weblogic.work.ExecuteThread.execute(ExecuteThread.java:256)
at weblogic.work.ExecuteThread.run(ExecuteThread.java:221)
Caused By: java.lang.UnsatisfiedLinkError: intradoc/common/NativeOsUtilsBase.getNativeVersion()Ljava/lang/String;
at intradoc.common.NativeOsUtilsBase.doLoad(NativeOsUtilsBase.java:448)
at intradoc.common.NativeOsUtilsBase.<init>(NativeOsUtilsBase.java:360)
at intradoc.common.NativeOsUtils.<init>(NativeOsUtils.java:28)
at intradoc.common.FileUtils.checkOrCreateDirectory(FileUtils.java:566)
at intradoc.conversion.StandardKeyLoader.init(StandardKeyLoader.java:36)
at idc.conversion.jps.CSFKeyLoader.init(CSFKeyLoader.java:47)
at intradoc.conversion.SecurityObjects.init(SecurityObjects.java:132)
at intradoc.conversion.CryptoPasswordUtils.initSecurityObjects(CryptoPasswordUtils.java:75)
at intradoc.conversion.CryptoPasswordUtils.loadPasswordManagement(CryptoPasswordUtils.java:136)
at intradoc.server.IdcInstallInfo.buildPasswordInfo(IdcInstallInfo.java:850)
at intradoc.server.IdcInstallInfo.createConfigAndPasswordFiles(IdcInstallInfo.java:573)
at intradoc.server.IdcInstallInfo.continueEarlyInstall(IdcInstallInfo.java:548)
at intradoc.server.IdcSystemConfig.initConfigEarly(IdcSystemConfig.java:205)
at intradoc.server.IdcSystemConfig.loadInitialConfig(IdcSystemConfig.java:323)
at intradoc.server.IdcServerManager.init(IdcServerManager.java:100)
at intradoc.idcwls.IdcServletRequestUtils.initializeServer(IdcServletRequestUtils.java:626)
at intradoc.idcwls.IdcServletRequestUtils.initializeServer(IdcServletRequestUtils.java:457)
at intradoc.idcwls.IdcIntegrateWrapper.initializeServer(IdcIntegrateWrapper.java:103)
at sun.reflect.NativeMethodAccessorImpl.invoke0(Native Method)
at sun.reflect.NativeMethodAccessorImpl.invoke(NativeMethodAccessorImpl.java:39)
at sun.reflect.DelegatingMethodAccessorImpl.invoke(DelegatingMethodAccessorImpl.java:25)
at java.lang.reflect.Method.invoke(Method.java:597)
at idcservlet.common.IdcMethodHolder.invokeMethod(IdcMethodHolder.java:87)
at idcservlet.common.ClassHelperUtils.executeMethodEx(ClassHelperUtils.java:305)
at idcservlet.common.ClassHelperUtils.executeMethodWithArgs(ClassHelperUtils.java:278)
at idcservlet.ServletUtils.initializeContentServer(ServletUtils.java:1257)
at idcservlet.ServletUtils.startAndConfigureServer(ServletUtils.java:531)
at idcservlet.ServletUtils.initializeAllServers(ServletUtils.java:460)
at idcservlet.IdcFilter.initContentServer(IdcFilter.java:181)
at idcservlet.IdcFilter.init(IdcFilter.java:156)
at weblogic.servlet.internal.FilterManager$FilterInitAction.run(FilterManager.java:343)
at weblogic.security.acl.internal.AuthenticatedSubject.doAs(AuthenticatedSubject.java:321)
at weblogic.security.service.SecurityManager.runAs(SecurityManager.java:120)
at weblogic.servlet.internal.FilterManager.loadFilter(FilterManager.java:96)
at weblogic.servlet.internal.FilterManager.preloadFilters(FilterManager.java:57)
at weblogic.servlet.internal.WebAppServletContext.preloadResources(WebAppServletContext.java:1872)
at weblogic.servlet.internal.WebAppServletContext.start(WebAppServletContext.java:3154)
at weblogic.servlet.internal.WebAppModule.startContexts(WebAppModule.java:1518)
at weblogic.servlet.internal.WebAppModule.start(WebAppModule.java:484)
at weblogic.application.internal.flow.ModuleStateDriver$3.next(ModuleStateDriver.java:425)
at weblogic.application.utils.StateMachineDriver.nextState(StateMachineDriver.java:52)
at weblogic.application.internal.flow.ModuleStateDriver.start(ModuleStateDriver.java:119)
at weblogic.application.internal.flow.ScopedModuleDriver.start(ScopedModuleDriver.java:200)
at weblogic.application.internal.flow.ModuleListenerInvoker.start(ModuleListenerInvoker.java:247)
at weblogic.application.internal.flow.ModuleStateDriver$3.next(ModuleStateDriver.java:425)
at weblogic.application.utils.StateMachineDriver.nextState(StateMachineDriver.java:52)
at weblogic.application.internal.flow.ModuleStateDriver.start(ModuleStateDriver.java:119)
at weblogic.application.internal.flow.StartModulesFlow.activate(StartModulesFlow.java:27)
at weblogic.application.internal.BaseDeployment$2.next(BaseDeployment.java:671)
at weblogic.application.utils.StateMachineDriver.nextState(StateMachineDriver.java:52)
at weblogic.application.internal.BaseDeployment.activate(BaseDeployment.java:212)
at weblogic.application.internal.EarDeployment.activate(EarDeployment.java:59)
at weblogic.application.internal.DeploymentStateChecker.activate(DeploymentStateChecker.java:161)
at weblogic.deploy.internal.targetserver.AppContainerInvoker.activate(AppContainerInvoker.java:79)
at weblogic.deploy.internal.targetserver.BasicDeployment.activate(BasicDeployment.java:184)
at weblogic.deploy.internal.targetserver.BasicDeployment.activateFromServerLifecycle(BasicDeployment.java:361)
at weblogic.management.deploy.internal.DeploymentAdapter$1.doActivate(DeploymentAdapter.java:51)
at weblogic.management.deploy.internal.DeploymentAdapter.activate(DeploymentAdapter.java:200)
at weblogic.management.deploy.internal.AppTransition$2.transitionApp(AppTransition.java:30)
at weblogic.management.deploy.internal.ConfiguredDeployments.transitionApps(ConfiguredDeployments.java:240)
at weblogic.management.deploy.internal.ConfiguredDeployments.activate(ConfiguredDeployments.java:169)
at weblogic.management.deploy.internal.ConfiguredDeployments.deploy(ConfiguredDeployments.java:123)
at weblogic.management.deploy.internal.DeploymentServerService.resume(DeploymentServerService.java:180)
at weblogic.management.deploy.internal.DeploymentServerService.start(DeploymentServerService.java:96)
at weblogic.t3.srvr.SubsystemRequest.run(SubsystemRequest.java:64)
at weblogic.work.ExecuteThread.execute(ExecuteThread.java:256)
at weblogic.work.ExecuteThread.run(ExecuteThread.java:221)Hi All
Cause of the problems was the missing of "Visual C++ 2005 SP1 Redistributable Package"
Environment works fine after installation of both versions (x86 and x64)
Thanks
Leon -
Initial Settings in SAP PI 7.3 after System Installation
Hi,
We are installing SAP PI 7.3 here. After media installation by BASIS team, what all other things an SAP PI consultant should maintain/configure(initially before start working on scenarios) ?
Since I have worked on SAP PI scenarios where the SAP PI server was completely ready(set up). This is the 1st time I'm working on completely new SAP PI system.
So please guide me at the earliest.
Thanks,
Amit PatilHi All,
This document explains more of "How to set up demo examples?"
But I want to do initial settings in fresh SAP PI 7.31 system post-installation. Since I have not done this before at all, I need the help step by step.
I am aware of what all things to be done in fresh SAP PI system like
RFC connections between ECC-PI and CRM-PI,
SLD connections between ECC-PI and CRM-PI,
Maintain Integration and Application Systems in SLD,
Checking Adapter & Integration Engine Status in PI,
Etc.
Please I need help desperately. -
Thanks,
Amit Patil
Message was edited by: Moderator -
Everything keeps freezing/crashing after Mavericks installation on MacBook Pro
Everything keeps freezing/crashing after Mavericks installation on MacBook Pro.
It started with Photoshop, then Safari, and now the Kinect sensor.
Mavericks is the worse thing that happened to me I have a thesis project to work on!
What can I do?
How can I remove Mavericks and go back to Mountain Lion?
ThanksHey StephSassine,
First, I would run through these steps:
Your computer’s startup disk may not have enough free disk space. To make disk space available, you can move files to another disk and then delete files you no longer need on the startup disk:
Increase disk space
http://support.apple.com/kb/PH10677
If that doesn't work, you may need to repair your computer’s disk in Disk Utility:
Choose Apple menu > Software Update to make sure you have the latest version of Mac OS X.
Software updates sometimes change a file’s permissions to improve security, so updating your software can solve some permissions problems.
Open Disk Utility, in the Utilities folder in Launchpad.
Select the disk you want to check.
Click First Aid.
Click Repair Disk Permissions to test and repair permissions.
via: Disk Utility 12.x: Repair disk permissions
http://support.apple.com/kb/PH5821
If that doesn't help resolve the issue, you can revert to a previous OS X version:
OS X Mavericks: Revert to a previous OS X version
http://support.apple.com/kb/PH14176
Sincerely,
Delgadoh
Maybe you are looking for
-
Downloaded game doesn't show up in iPod
I bought the Zuma game which shows up in my iMac Library, but when I sync my iPd it doesn't appear. I go to extra>games and there are 3 games which apparently come with the new iPods. But not Zuma. In iTunes it shows Zuma in my Library though.
-
Errors:Installing Oracle Portal, Forms, Reports and Discoverer on Win7
Someone can help me? I installed Oracle Portal, Forms, Reports and Discoverer on Win7. I have install: jdk 64bit Oracle db 11g (64bit) Oracle Weblogic 1033 (wls1033_generic.jar) Oracle Portal, Forms, Reports and Discoverer (ofm_pfrd_win_11.1.1.2.0_64
-
Disabling radio button and only keep one active out of all...
Hello Gurus, I have 4 radio button names as RD1. RD2, RD3 and in the last RD4. Now when user excutes the transaction, I want only RD3 to be selected and RD1, RD2 and RD4 to be inactive (greyed out). I tried couple of ways but its not happening. Pleas
-
Early 2011 MacBook Pro logic board upgrade question
I have an early 2011 MacBook Pro 17'. Will a late 2011 logic board fit in the unibody of an early 2011? My logic board crashed and I'm looking to install a new one myself. I just need to see if I can upgrade mine at all. I want to purchase a logic bo
-
Project Manager Expanded search=Program Crash
I had a system crash the other night causing me to have to re install OSX. Archived and installed. So now I am "System Administrator" instead of my PK. Also every program thinks I am using it for the first time. When I opened the loop browser more th