G5 freezes at startup, get grey screen with logo, but no spinning gear

As subject says, I get the Grey Startup screen with aple logo, but no spining gear.
do i need a new install of OS X? Or ???

Hi wampaskitty, and a warm welcome to the forums!
Could be many things, we should start with this...
"Try Disk Utility
1. Insert the Mac OS X Install disc, then restart the computer while holding the C key.
2. When your computer finishes starting up from the disc, choose Disk Utility from the Installer menu. (In Mac OS X 10.4 or later, you must select your language first.)
*Important: Do not click Continue in the first screen of the Installer. If you do, you must restart from the disc again to access Disk Utility.*
3. Click the First Aid tab.
4. Select your Mac OS X volume.
5. Click Repair. Disk Utility checks and repairs the disk."
http://docs.info.apple.com/article.html?artnum=106214
Then try a Safe Boot, (holding Shift key down at bootup), run Disk Utility in Applications>Utilities, then highlight your drive, click on Repair Permissions, reboot when it completes.
(Safe boot may stay on the gray radian for a long time, let it go, it's trying to repair the Hard Drive.)
If perchance you can't find your install Disc, at least try it from the Safe Boot part onward.
If that doesn't work, Boot off your original G5 Install Disk while holding down Option/alt key to select AHT, then run the extended Apple Hardware Test.

Similar Messages

  • MacBook Pro freezes at startup on grey screen with apple and spinner

    I was on Firefox and suddenly the screen froze. 10-15 minutes later i still couldn't do anything on it so i had to force power my laptop off by holding down the power button. Normally when I have this sort of issue, this will solve it. But when I try to turn my laptop back on it gets to the grey screen with the apple logo and little spinner thing and just stays on that screen forever. I'm not really sure what to do now. A couple articles suggested "reseting the PRAM" and I tried that but it didn't help. If you have any suggestions if really appreciate it. And I'm not really sure if i have everything backed up and I really don't want to lose all my pictures so if you could keep that in mind if you have any ideas I'd appreciate it. thanks!

    emeraldxx wrote:
    But when I try to turn my laptop back on it gets to the grey screen with the apple logo and little spinner thing and just stays on that screen forever.
    Could be problems with the boot drive, corrupted system and or a incompatible/old outdated third party kerenel extension file..
    Run through this list of fixes, it's systematically designed to narrown down your issue.
    ..Step by Step to fix your Mac

  • How to go to finder from blank grey screen with apple icon and spinning gear

    My Mac desktop won't start up,  it showed blank grey screen with an apple icon and spinning gear for ages. Due my computer is vintage so I would need to backup my user files before I could re-install OS X via NetBoot. My question is how can I access to the finder to back up my user folder from the grey screen.  Thanks

    Take each of these steps that you haven't already tried. Stop when the problem is resolved.
    To restart an unresponsive computer, press and hold the power button for a few seconds until the power shuts off, then release, wait a few more seconds, and press it again briefly.
    Step 1
    The first step in dealing with a startup failure is to secure the data. If you want to preserve the contents of the startup drive, and you don't already have at least one current backup, you must try to back up now, before you do anything else. It may or may not be possible. If you don't care about the data that has changed since the last backup, you can skip this step.
    There are several ways to back up a Mac that is unable to start. You need an external hard drive to hold the backup data.
    a. Start up from the Recovery partition, or from a local Time Machine backup volume (option key at startup.) When the OS X Utilities screen appears, launch Disk Utility and follow the instructions in this support article, under “Instructions for backing up to an external hard disk via Disk Utility.” The article refers to starting up from a DVD, but the procedure in Recovery mode is the same. You don't need a DVD if you're running OS X 10.7 or later.
    b. If Step 1a fails because of disk errors, and no other Mac is available, then you may be able to salvage some of your files by copying them in the Finder. If you already have an external drive with OS X installed, start up from it. Otherwise, if you have Internet access, follow the instructions on this page to prepare the external drive and install OS X on it. You'll use the Recovery installer, rather than downloading it from the App Store.
    c. If you have access to a working Mac, and both it and the non-working Mac have FireWire or Thunderbolt ports, start the non-working Mac in target disk mode. Use the working Mac to copy the data to another drive. This technique won't work with USB, Ethernet, Wi-Fi, or Bluetooth.
    d. If the internal drive of the non-working Mac is user-replaceable, remove it and mount it in an external enclosure or drive dock. Use another Mac to copy the data.
    Step 2
    If the startup process stops at a blank gray screen with no Apple logo or spinning "daisy wheel," then the startup volume may be full. If you had previously seen warnings of low disk space, this is almost certainly the case. You might be able to start up in safe mode even though you can't start up normally. Otherwise, start up from an external drive, or else use the technique in Step 1b, 1c, or 1d to mount the internal drive and delete some files. According to Apple documentation, you need at least 9 GB of available space on the startup volume (as shown in the Finder Info window) for normal operation.
    Step 3
    Sometimes a startup failure can be resolved by resetting the NVRAM.
    Step 4
    If you use a wireless keyboard, trackpad, or mouse, replace or recharge the batteries. The battery level shown in the Bluetooth menu item may not be accurate.
    Step 5
    If there's a built-in optical drive, a disc may be stuck in it. Follow these instructions to eject it.
    Step 6
    Press and hold the power button until the power shuts off. Disconnect all wired peripherals except those needed to start up, and remove all aftermarket expansion cards. Use a different keyboard and/or mouse, if those devices are wired. If you can start up now, one of the devices you disconnected, or a combination of them, is causing the problem. Finding out which one is a process of elimination.
    Step 7
    If you've started from an external storage device, make sure that the internal startup volume is selected in the Startup Disk pane of System Preferences.
    Start up in safe mode. Note: If FileVault is enabled, or if a firmware password is set, or if the startup volume is a software RAID, you can’t do this. Post for further instructions.
    Safe mode is much slower to start and run than normal, and some things won’t work at all, including wireless networking on certain Macs.
    The login screen appears even if you usually log in automatically. You must know the login password in order to log in. If you’ve forgotten the password, you will need to reset it before you begin.
    When you start up in safe mode, it's normal to see a dark gray progress bar on a light gray background. If the progress bar gets stuck for more than a few minutes, or if the system shuts down automatically while the progress bar is displayed, the startup volume is corrupt and the drive is probably malfunctioning. In that case, go to Step 11. If you ever have another problem with the drive, replace it immediately.
    If you can start and log in in safe mode, empty the Trash, and then open the Finder Info window on the startup volume ("Macintosh HD," unless you gave it a different name.) Check that you have at least 9 GB of available space, as shown in the window. If you don't, copy as many files as necessary to another volume (not another folder on the same volume) and delete the originals. Deletion isn't complete until you empty the Trash again. Do this until the available space is more than 9 GB. Then restart as usual (i.e., not in safe mode.)
    If the startup process hangs again, the problem is likely caused by a third-party system modification that you installed. Post for further instructions.
    Step 8
    Launch Disk Utility in Recovery mode (see Step 1.) Select the startup volume, then run Repair Disk. If any problems are found, repeat until clear. If Disk Utility reports that the volume can't be repaired, the drive has malfunctioned and should be replaced. You might choose to tolerate one such malfunction in the life of the drive. In that case, erase the volume and restore from a backup. If the same thing ever happens again, replace the drive immediately.
    This is one of the rare situations in which you should also run Repair Permissions, ignoring the false warnings it may produce. Look for the line "Permissions repair complete" at the end of the output. Then restart as usual.
    Step 9
    If the startup device is an aftermarket SSD, it may need a firmware update and/or a forced "garbage collection." Instructions for doing this with a Crucial-branded SSD were posted here. Some of those instructions may apply to other brands of SSD, but you should check with the vendor's tech support.  
    Step 10
    Reinstall the OS. If the Mac was upgraded from an older version of OS X, you’ll need the Apple ID and password you used to upgrade.
    Step 11
    Do as in Step 9, but this time erase the startup volume in Disk Utility before installing. The system should automatically restart into the Setup Assistant. Follow the prompts to transfer the data from a Time Machine or other backup.
    Step 12
    This step applies only to models that have a logic-board ("PRAM") battery: all Mac Pro's and some others (not current models.) Both desktop and portable Macs used to have such a battery. The logic-board battery, if there is one, is separate from the main battery of a portable. A dead logic-board battery can cause a startup failure. Typically the failure will be preceded by loss of the settings for the startup disk and system clock. See the user manual for replacement instructions. You may have to take the machine to a service provider to have the battery replaced.
    Step 13
    If you get this far, you're probably dealing with a hardware fault. Make a "Genius" appointment at an Apple Store, or go to another authorized service provider.

  • G5 gets grey screen with logo then goes black, won't boot from any disk

    Won't boot from any disk, already changed VRAM battery, no success. tried hardware disk once and ran a full scan, said error with Video, but now won't boot at all with any disk. Screen is choppy also(have pic). Thinking video graphics card? Not sure. Need help!

    Hi bribiel, and a warm welcome to the forums!
    It certainly sounds like the Video card from the little info we have, & that can certainly cause it to fail to bootup.

  • On start up I get grey screen with wheel turning but it goes no further

    On start up I get grey screen with wheel turning but it goes no further

    Take each of these steps that you haven't already tried. Stop when the problem is resolved.
    Step 1
    The first step in dealing with a startup failure is to secure the data. If you want to preserve the contents of the startup drive, and you don't already have at least one current backup, you must try to back up now, before you do anything else. It may or may not be possible. If you don't care about the data that has changed since the last backup, you can skip this step.   
    There are several ways to back up a Mac that is unable to start. You need an external hard drive to hold the backup data.
         a. Start up from the Recovery partition, or from a local Time Machine backup volume (option key at startup.) When the OS X Utilities screen appears, launch Disk Utility and follow the instructions in this support article, under “Instructions for backing up to an external hard disk via Disk Utility.” The article refers to starting up from a DVD, but the procedure in Recovery mode is the same. You don't need a DVD if you're running OS X 10.7 or later.
    b. If Step 1a fails because of disk errors, and no other Mac is available, then you may be able to salvage some of your files by copying them in the Finder. If you already have an external drive with OS X installed, boot from it. Otherwise, if you have Internet access, follow the instructions on this page to prepare the external drive and install OS X on it. You'll use the Recovery installer, rather than downloading it from the App Store.
    c. If you have access to a working Mac, and both it and the non-working Mac have FireWire or Thunderbolt ports, start the non-working Mac in target disk mode. Use the working Mac to copy the data to another drive. This technique won't work with USB, Ethernet, Wi-Fi, or Bluetooth.
    d. If the internal drive of the non-working Mac is user-replaceable, remove it and mount it in an external enclosure or drive dock. Use another Mac to copy the data.
    Step 2
    If the startup process stops at a blank gray screen with no Apple logo or spinning "daisy wheel," then the startup volume may be full. If you had previously seen warnings of low disk space, this is almost certainly the case. You might be able to start up in safe mode even though you can't start up normally. Otherwise, start up from an external drive, or else use the technique in Step 1b, 1c, or 1d to mount the internal drive and delete some files. According to Apple documentation, you need at least 9 GB of available space on the startup volume (as shown in the Finder Info window) for normal operation.
    Step 3
    Sometimes a startup failure can be resolved by resetting the NVRAM.
    Step 4
    If you use a wireless keyboard, trackpad, or mouse, replace or recharge the batteries. The battery level shown in the Bluetooth menu item may not be accurate.
    Step 5
    If there's a built-in optical drive, a disc may be stuck in it. Follow these instructions to eject it.
    Step 6
    Press and hold the power button until the power shuts off. Disconnect all wired peripherals except those needed to start up, and remove all aftermarket expansion cards. Use a different keyboard and/or mouse, if those devices are wired. If you can start up now, one of the devices you disconnected, or a combination of them, is causing the problem. Finding out which one is a process of elimination.
    Step 7
    If you've started from an external storage device, make sure that the internal startup volume is selected in the Startup Disk pane of System Preferences.
    Start up in safe mode. Note: If FileVault is enabled, or if a firmware password is set, or if the startup volume is a Fusion Drive or a software RAID, you can’t do this. Post for further instructions.
    Safe mode is much slower to start and run than normal, and some things won’t work at all, including wireless networking on certain Macs.
    The login screen appears even if you usually log in automatically. You must know the login password in order to log in. If you’ve forgotten the password, you will need to reset it before you begin.
    When you start up in safe mode, it's normal to see a dark gray progress bar on a light gray background. If the progress bar gets stuck for more than a few minutes, or if the system shuts down automatically while the progress bar is displayed, the startup volume is corrupt and the drive is probably malfunctioning. In that case, go to Step 10. If you ever have another problem with the drive, replace it immediately.
    If you can start and log in in safe mode, empty the Trash, and then open the Finder Info window on the startup volume ("Macintosh HD," unless you gave it a different name.) Check that you have at least 9 GB of available space, as shown in the window. If you don't, copy as many files as necessary to another volume (not another folder on the same volume) and delete the originals. Deletion isn't complete until you empty the Trash again. Do this until the available space is more than 9 GB. Then restart as usual (i.e., not in safe mode.)
    If the startup process hangs again, the problem is likely caused by a third-party system modification that you installed. Post for further instructions.
    Step 8
    Launch Disk Utility in Recovery mode (see Step 1.) Select the startup volume, then run Repair Disk. If any problems are found, repeat until clear. If Disk Utility reports that the volume can't be repaired, the drive has malfunctioned and should be replaced. You might choose to tolerate one such malfunction in the life of the drive. In that case, erase the volume and restore from a backup. If the same thing ever happens again, replace the drive immediately.
    This is one of the rare situations in which you should also run Repair Permissions, ignoring the false warnings it may produce. Look for the line "Permissions repair complete" at the end of the output. Then restart as usual.
    Step 9
    If the startup device is an aftermarket SSD, it may need a firmware update and/or a forced "garbage collection." Instructions for doing this with a Crucial-branded SSD were posted here. Some of those instructions may apply to other brands of SSD, but you should check with the vendor's tech support.   
    Step 10
    Reinstall the OS. If the Mac was upgraded from an older version of OS X, you’ll need the Apple ID and password you used to upgrade.
    Step 11
    Do as in Step 9, but this time erase the startup volume in Disk Utility before installing. The system should automatically restart into the Setup Assistant. Follow the prompts to transfer the data from a Time Machine or other backup.
    Step 12
    This step applies only to models that have a logic-board ("PRAM") battery: all Mac Pro's and some others (not current models.) Both desktop and portable Macs used to have such a battery. The logic-board battery, if there is one, is separate from the main battery of a portable. A dead logic-board battery can cause a startup failure. Typically the failure will be preceded by loss of the settings for the startup disk and system clock. See the user manual for replacement instructions. You may have to take the machine to a service provider to have the battery replaced.
    Step 13
    If you get this far, you're probably dealing with a hardware fault. Make a "Genius" appointment at an Apple Store, or go to another authorized service provider.

  • Macbook Pro does not start. Grey screen with logo and status bar going on forever.

    I have a Macbook Pro, late 2010 running with OS Mavericks. Lately it became very slow but never had major issues like crashing. Lat night, I tried a hard restart because it was stuck and I cannot get it to restart ever since. I get sound and grey screen with logo. The status bar is going on forever but does not boot. Can anyone help, please?

    Try a safe boot:
    http://support.apple.com/kb/HT1564
    If no success, boot into recovery:
    http://support.apple.com/kb/ht1310
    Select the recovery partition and then from the 4 option menu select Disk Utility.
    Open Disk Utility>First Aid and run Verify and Repair.
    What are the results?
    Ciao.

  • My macbook pro doesn't bootbeyond the grey screen with apple icon and spinning wheel.

    My macbook pro doesn't boot beyond the grey screen with apple icon and spinning wheel.  I used the "Option" button to access the Disk Utility function and run Repair Disk and Repair Disk Permissions.  Should I restart my computer?

    The following support article is somewhat outdated. Where it refers to booting from an installation disc, you should boot from your recovery partition (if running 10.7 or later) by holding down the key combination command-R at the chime.
    Mac OS X: Gray screen appears during startup

  • Brand new MacBookPro 13" , Stuck at White Screen with gray apple and spinning gear.

    Brand new MacBookPro 13" , Stuck at White Screen with gray apple and spinning gear.
    This MBP apparently didn't come with a DVD and safe mode ( holding shift at boot up ) isn't working.
    Any ideas would be most appreciated.

    Call AppleCare. You should not be having problems with a brand-new machine.

  • TS3423 my start drive not responding. getting grey screen with question mark in a folder. when i use disk utility drive wont mount

    When I turn on my Mac I get a grey screen with a folder with a question mark . Have tried the disk utility to no avail as the disk has apparently dismounted and will not mount even though the mount option is available. I have recently upgraded from snow leopard go os x maverick

    This could be a software/state problem or a hardware problem.  In your case it sounds like the latter but you should try the steps below in case it might help.
    Mac OS X: Gray screen appears during startup
    http://support.apple.com/kb/TS2570

  • Getting Grey Screen with Apple..and progress bar..  This is what I get

    Greetings all,
    I desperately need help..My macbook pro was running slow, and so looking online I found something about resetting smc and pram. Well I did both and the computer booted up fine. Then on my next reboot the machine wouldn't start. I'm getting the grey screen with the apple. A progress bar shows for a second but then goes away. I'm not able to get into safemode. But I was able to run the disk utility program from the snow leopard cd. Basically tellls me that the keys are out of order and then says "Error: Disk Utility can`t repair this disk...disk, and restore your backed-up files." This has to be bad.. I don't have a backup.. but luckily most of my stuff was on my macmini (I just had a baby so I had alot of pictures)
    Is my only option to erase? Right now the hard drive won't mount (atleast through the disk utility, since it can't repair it)
    Please tell me I have other choices.

    So you also have a Mac Mini? Then you might be able to retrieve files from the bad hard drive using FireWire Target Disk Mode:
    http://support.apple.com/kb/HT1661
    FWTDM will allow you to mount your Mac's hard drive on the Mini's desktop and it will be just like any external hard drive. You will be able to copy files from it.
    Another option would be to remove the drive from your Mac and place it in an external enclosure, which would essentially turn it into an external drive. You would then install a brand new drive into your MBP.
    It is possible that you could repair the drive with a stronger utility such as Disk Warrior. However, DW only repairs the complex software on your drive--it cannot repair a drive which is beginning to fail, which could well be the case with yours. You don't say exactly which MBP you have, but the average useful life of a laptop hard drive is 3-5 years, and many fail within the first year. Often the kind of problems you are seeing are due to a drive beginning to fail, so your first priority will be to get your data off of the drive.
    Since you were also seeing slowness, I suspect that your hard drive is headed south. If so, there wouldn't be much point in reformatting. It would just destroy your data, and your drive may still not ever work properly again. You can get a new drive for less than the price of Disk Warrior, although it's possible that DW can fix the corruption on your drive, at least for a while.
    Also, how full is your drive? If too full, that could be a contributing factor.
    If you do decide to try Disk Warrior and succeed in getting up and running, you should run SMART Utility:
    http://www.apple.com/downloads/macosx/systemdiskutilities/smartutility.html
    You can download the demo and run it several times for free. It will give you a comprehensive view of the physical health of your hard drive.
    What I would recommend is that you try FWTDM first and try to get everything off of the drive that you care about. If the drive is failing, it could fail completely at some point, so getting your stuff off of it is your most important priority.
    If FWTDM doesn't work, then the next thing to do is to remove the drive and put it in an enclosure and see if it will mount that way.
    The newer unibody Macs are designed so that you can replace the hard drive yourself. If you have an original MBP, you may want to get an AASP to install a new drive and give you the old one back in an enclosure. If you are under warranty, this won't void your warranty. If you are under warranty, Apple will replace a failed hard drive, but you won't get to keep the old one.
    If you are out of warranty, you could consider replacing the drive yourself using the directions at ifixit.
    Once you have gotten out of this fix, it's time to set up a backup strategy.
    Good luck! Post back if you have further questions.

  • Gets stuck on grey screen with logo after restore.

    I restored my 2008 macbook and reinstalled OS X lion onto it. It downloaded items for lion and automatically restarted. When it restarted it got stuck on a grey screen with the apple logo and a spinning circle. I turned the computer off and attempted to restart again, same outcome. I restarted it again and pressed command option p r (saw it from other posts on here) and it brought me back to the screen where I can reinstall OS X lion, go to utilities, etc. So I clicked reimstall lion and it did its thing and automatically restarted. Then like last time it got stuck on the grey screen with the logo and spinning circle.ugh! What am I doing wrong? Please help.

    Restarted it again with the p r command option brought me to the installing screen again and then said "there was an error installing please try agian" please any help is aporeciated, I have my files on an external hard drive but I need to be able to access my computer so I can continue applying to jobs/access my resume on the external hard drive and it is my only way to talk to my deployed husband besides email on my phone.
    I also clicked repair disk in utilities and it says "the volume Mac os x base system appears to be OK" It will not bring me to the thing where I have the option to reinstall lion. I restarted and its yet again stuck on the grey screen with apple logo and spinning circle.

  • PB Won't start--grey screen with logo--no spinning wheel

    Did an update that required a restart--got grey screen with the apple logo and that's all. Tried resetting the Pram and the PMU, no luck. Won't start in safe mode or from another DVD (tried both the original and my Tiger disks). It was working normally before the update (iTunes and I think an Airport update and a couple of other things). I've removed and re-installed the RAM with no change.

    Thanks!
    HD disconnected it starts from a CD. HD re-connected it now displays the spinning geary thing but doesn't get any further. Disk First Aid found and fixed many problems but it still won't go past the spinning thingy. It passed Apple's hardware tests. So--a new HD is likely in order but I want to try a more comprehensive disk repair program and recommendations for that and for a new HD are welcome!

  • I get white screen with logo after update OS 10.6.6

    Yesterday I download the update, get the message intall and turn off so I did it.
    Today i turn on the imac and it wont start, i get the white screen with the logo. I´ve triied almost everything...
    Change disc permissions
    Veryfy disc
    Restart on safe mode
    Turn on and off
    Please help!

    Try booting from your install disc again. Make sure that error was corrected.
    Insert your install disk and Restart, holding down the "C" key until grey Apple appears.
    Go to Installer menu and launch Disk Utility.
    (In Mac OS X 10.4 or later, you must select your language first from the installer menu)
    Select your HDD (manufacturer ID) in the left panel.
    Select First Aid in the Main panel.
    (Check S.M.A.R.T Status of HDD at the bottom of right panel. It should say: Verified)
    Click Repair Disk on the bottom right.
    If DU reports disk does not need repairs quit DU and restart.
    If DU reports errors Repair again and again until DU reports disk is repaired.
    When you are finished with DU, from the Menu Bar, select Utilities/Startup Manager.
    Select your startup disk and click Restart
    While you have the Disk Utility window open, look at the bottom of the window. Where you see Capacity and Available. Make sure there is always 15% free space.

  • TS3148 my mackbook air starts up with a  persistent grey screen, apple logo and spinning gear

    my mackbook air starts up with a persistent grey screen, apple logo and a spinning gear. It will not show the login window

    Press and hold the power button down to force a hardware shutdown (emergency use only!)
    Next find the Shift key and hold it and press the power button, the machine will boot into Safe Mode.
    Next backup your files to a external drive just in case.
    Emergency backup procedure
    Drag and drop copy your users file folders (music, pictures, documents etc) to a regular external powered drive as soon as possible.
    Do not use, setup or trust only TimeMachine at this troubled time as it will copy corrupted data and we need just your users files safe just in case. TimeMachine cannot be used with a Windows PC.
    Unmount and Disconnect all external drives once the backup process is completed.
    Note:
    If you have any over 4GB sized files, those won't copy to a standard formatted FAT32/MSDOS drive from the factory, if you need to save these 4GB+ files use another blank/empty drive and use Disk Utility to format it 1 Partition, Option: GUID,  Format: OS X Extended Journaled (or the standard default one for older Mac's).
    Mac's cannot copy to nor format a NTFS  drive. ExFAT format to be used with a Windows machine must be right click formatted by Windows, not OS X (does it wrong) XP macines can install a free exFAT update from Microsoft. Vista-Win 8 can format exFAT.
    Formatting a drive will erase all data on it.
    Most commonly used backup methods
    Your problem is likely due to a incompatible third part at boot kernel extension file that some program installed into OS X at some time.
    If you can recall which programs you installed using your Admin password then that's a good place to start and update or uninstall those programs.
    The next solution is a #8 Reinstall Just OS X + Software Update fully,  this will replace OS X with a new copy, fix OS X if it's the cause and kick out ALL third party kext files out of OS X.
    You also can manually drag and drop the third party kext files (if you know what they are) out of of the System/Library/Extensions folder and reboot.
    ..Step by Step to fix your Mac
    Solving at boot kext issues in Snow Leopard

  • Grey Screen w/ logo on startup, crashes in disk utility and FW disc mode

    So yesterday I woke my computer from sleep and launched firefox. After a few minutes it crashed and the froze. I restarted and got the grey screen with apple logo. Restarted many more times and would either get the grey screen with logo or if it managed to startup it would again freeze after a few minutes.
    Tried starting up from install disc to launch disc utility to check the permissions and verify disk. This also froze several times put i managed to repair permissions and repair disc. Now I am not able to get it to start up unless from the install disk. I have a bootable backup drive with I tried to connect and use as a startup disc. I just got a black screen when I tried that, I also connected the G5 to my
    Powerbook G4 in firewire disk mode. It connected and I was going to attempt to copy the Bootable external drive back to the Drive in the tower and try starting from that, but the G5 then froze in Firewire disk mode and had to be restarted.
    I'm out of options here, and desperate....any ideas. I thought that grey screens many times meant software or hardware conflicts. could this just be something horribly wrong with my hardware?
    Help!
    Thanks in Advance!

    I've read several response to problems with target disc mode. I'm trying to connect my old computer, G3 tower with OS 8.6, to my new computer, mac book pro. I've called tech support twice and they have no clue as to why it won't work. They suggested this discussion page. I tried what one fella did, which worked for him, but didn't for me. I rebooted with shift button down, then ran verify and repair, then shut down, unplugged for a minute or two, restarted zapping pram (optioncommand(apple) P & R keys. Then restarted with the T key down. Attached firewire to both target computer and disc computer, (did this first), but no jumping firewire icon ever appeared.
    One fella out there said it took his computer 5 minutes for the icon to appear. Did he hold the T key down all that time? I let go after my normal desktop icons were up and the computer stopped wiring.
    I am calling tech support back...who knows maybe I'll get someone who knows something.
    Any ideas?
    Thanks Little Champ

Maybe you are looking for