G5 Gigabyte Built-in Network Adapter won't connect at 1000

Built-in ethernet adapter will not connect to DLink Gigabyte switch even with a known-good cable. My other G5 connects fine to the switch in the same port. Adapter connects fine to 100mb Linksys switch. Really looks like a driver problem. Is there an updated driver for the built-in adapter? Or is there another solution?
Thanks
PowerMac 7.2 G5 Dual 2Ghz Mac OS X (10.4.9)

adkcomputerguy-
Greetings and welcome to the Apple boards.
It won't connect at all or just at 1000T? Could be a driver but I would suspect the cable. Are you connecting directly to the switch?
Have you ever been able to use this machine at gig speed? What happens if you connect the two G5's directly and make them their own network without a switch?
Luck-
-DaddyPaycheck

Similar Messages

Network Adapter cannot establish connection

Hello. I can't seem to find an answer to this anywhere: I have a database that can be accessed via JDBC from certain IP addresses but not others. The ones that can't access it give me the exeception: "Network Adapter cannot establish connection" The database machine can be PINGed from the client; the IP address of the database is used so it's not a name resolution problem; we are instatiating the driver correctly...AND it WORKS from other clients!
Does anyone have any ideas as to what the problem could be?
Thanks.

If there are firewalls involved, connections on port 1521 have to be allowed.

TS1398 my ipad is connected to my wifi network but won,t connect to the internet, i have tried resetting network settings but it still won't work.

my i pad is connected to my wifi network bt won't connect to the internet I have tried resetting network connections. it will connect to the internet from my phone hot spot

Try restarting your WiFi router by removing power to it for 30 seconds.

Network Adapter can't connect - HELP!

I'm getting the infamous "Network adapter could not establish the connection" error
for my RDBMS realm. I am running WLS 6.1 on Win2k. What is really wierd is that
I have an instance of WLS 5.1 running on the same box and I don't see that problem.
This started about a week ago... I used to have 6.1 running, then it did this
for a day, then it ran and now it seems to be permanently unhappy. I've looked
through the newsgroup posts and everything in my setup seems OK.
Any ideas?
thanks,
lisa

I'm not positive on this, but it might be a encryption compatibility problem between your network and your AirPort Card. I believe that OS 10.3.x is only capable of the basic encryption WEP, and not the the more modern encryptions WPA and WPA2. I also think if you upgrade to 10.3.9, that might help get you into WPA encrpytion but it still not up to WPA2 that many modern networks now use. Then there is 40 bit and 128 bit encryption, and I can't help you there with that.
There are two iMacs with a G4 1Ghz chip, the 15" model M9285LL/A or the 17" model M8935LL/A. Both of these are AirPort Extreme ready. Did you use an AirPort card or an AirPort Extreme card? Perhaps this might be a conflict.
There are WiFi protocols like IEEE 802.11a/b/g/n (with each letter signifying a different protocol). I'm pretty sure the original AirPort card on worked on IEEE 802.11a/b. That might be a problem.
I have an old Tangerine iBook running 10.2.8, that I can't use anymore on WiFi because it couldn't handle the encryption.
I hope some of these might be helpful.
Good luck.

Laptop sees Photosmart on network, but won't connect

I have a Pavilion dv4 with Windows 7. I have a Photosmart C4795. My printer used to be hooked up to my desktop, but my HP Desktop has crashed and it's trash. So now I'm trying to hook my laptop up to my printer on the network. For two days, I was able to connect and download with no problems, but my laptop would never print. Wouldn't even do a test page. Uninstalled and reinstalled at least 10 times. I ran the scan doctor and it said there was nothing wrong with my printer, but it wouldn't print a test page either. It then had me do an internal test page and that one work, so it diagnosed that the software was bad.
All of that was yesterday. NOW TODAY, I uninstalled and reinstalled the software. It's the most up to date software and drivers from the HP Support page. Now, my printer recognizes that the printer is on the network, but won't install the printer. It did the diagnostics, then brought up the screen where it showed my computer on the left, modem in the middle, printer on the right. It gets about halfway through setting it up, then quits and says it can't complete. I ran the scan doctor again and it says that the full software version is not installed. I JUST downloaded it from the website and installed it twice and it won't work. The version I download from the website is around 146mb, but when I download it from the scan doctor page, it's over 200 mb. I run that software and it is exactly the same.
I have tried to set it up via usb. It gets to the 7th of the 8 steps, then it won't go any further. Again, the printer is detected, but it says the appropriate drivers aren't there.
I have tried to set up it's own port using it's USB and a different driver, but that gives me an error. Unable to install printer. Operation could not be completed (error 0x000003eb).)
Would someone please help me, and then if I reply with what it is doing next, please respond?
Please help me get through this. Two days now and I don't have a solution.
Just me, friebe13

Hi,
If you are using AT&T wireless router to connect the Photosmart to network, you can refer this link for a solution :
http://h10025.www1.hp.com/ewfrf/wc/document?docname=c03112838&tmp_task=solveCategory&cc=us&dlc=en&la...
Hope this helps.
Click "Thumbs up" if this helped you in any way.
Its a pleasure talking to you ! Have a Great Day!
I work for HP, but my comments and recommendations here are my PERSONAL views and NOT on behalf of HP.

Appletv recognizes my wireless network but won't connect to the internet. can't restore to factory settings

appletv won't connect to the internet, but recognizes my wireless network. ip address starts with 169.. somethings not right. never had a problem with appletv and home sharing until the update that required a change in my apple id

An IP address starting with 169 indicates you are not properly connected to your network. Try restarting your router and try to connect again. if the problem persists you may be suffering from interference.

IPhone 5 Wi-Fi problems: "sees" the network, but won't connect

Hi everybody,
For the past 3 days I've been having sudden problems with my brand new iPhone 5 (version 6.0.2 {10A551}).
It just won't connect to the internet, no matter what I do. It actually "sees"the availble networks, but when I put the password in, it says"Unable to connect to the network".
I tried Resetting Network settings and All Settings, to no avail.
The irony is that I get Facebook notifications, App of the day Notifications, occasional mails, but nothing else. Email sync is erratic, and always with the little round circle where the WiFi icon should be. No Whatsapp, Viber, etc.
I'm totally baffled and equally desperate.
Can anyone help me please?
Many thanks in advance and Happy New Year to all thread readers.
Joyce

Try restarting your router first, turn it off for a minute then back on. then go to settings on your phone, then wifi, tap on the blue arrow to the right of your wifi 's name, then tap forget this network. Then go to the home screen, Then hold the home and off button down until the apple symbol comes up. Then go back into wifi and try to connect.

Windows XP laptop sees wireless network but won't connect

I set up a wireless network on my airport extreme using my MacBook. The McBook runs great on the wireless network. My old Dell laptop running Windows XP sees the wireless network I created (with full signal strength) but every time I hit "connect" I get the following error message, "Windows is unable to connect to the selected network. The network may no longer be in range. Please refresh the list of available networks, and try to connect again." When I referesh the list, the wireless network is still there, and i still cannot connect, getting the same error message.
Any suggestions?

Hello apetera. Welcome to the Apple Discussions!
Per chance are you using WEP for your wireless encryption?
If so, one of the problems with WEP is that the actual standard relies on a 10 character HEX key for 40bit WEP and a 26 character HEX key for 128bit WEP.
In order to make things easier, vendors use certain algorithms to convert simple alphanumeric passwords (or passphrases) into HEX keys, thus enabling the use of simple easy to remember WEP password rather than lengthy HEX keys. The problem is that different vendors use different algorithms to generate the HEX key and therefore a ASCII password on an AEBS will be hashed differently on a non-Apple client and vice versa.
You may find the following articles helpful:
o Accessing a Airport Network with a Windows XP PC or laptop (with XP SP2)
o Apple article, especially the part about "Third-party client to Airport".

Can see network but won't connect

I have three computers using an Airport Express base station. They've worked just fine until this morning, when I bumped up security by setting WPA/WPA2 Personal.
Since then, the Power PC G4 (OS X 10.4.11) can see the base station's network, but will not connect to it.
I've done multiple restarts, verified permissions, unplugged and replugged the base station and also the cable modem. Nothing has worked.
Please help.

Yes, if I set "Security" to "None," the G4 can connect. But I set it up after I found my next-door neighbor's shared files folder listed on my network this morning. He's an OK guy, but it made me aware of how vulnerable my network is.
My firmware is version 9.52. I've prowled the Apple site looking for an indication of whether that's the latest, but couldn't find one. My "Software Update" says everything's up-to-date.

Apple tv is connected to the network but won't connect to internet?

My apple tv 3 is connected to our wireless network but will not connect to the internet. I also cannot turn on home sharing. All the other wireless devices in our house have no problem with the internet. I have hooked the apple tv up to the computer and restored the factory defaults but that did not help. Any suggestions?

have you tried connecting using ethernet to see if it's a wifi issue ?
and have you verified that the required ports are allowed on the network ?
TCP and UDP ports and protocols used by Apple TV - Apple Support
TCP and UDP ports used by Apple software products - Apple Support

WRT610N 5ghz xbox 360 wireless N adapter won't connect (xbox 360 "Wireless Mode = Not connected")

Hi folks,
Looks like some other folks have reported similar. Haven't seen if an answer has been found anywhere.
WRT610v2 running latest firmware.
xbox 360 sees both the 2.4 network (ssid = network1) and the 5.0 network (ssid network2) when it does its scan.
Initially, xbox showed network strength for 2.4 network at 3 out of 4 bars and 5.0 network at 1 out of 4 bars.
Connects to 2.4 network just fine
Won't pull an ip address and reports "Not connected" when I select the 5.0 network.
I tweaked the wireless settings per some suggestions I found in this forum and now it shows the 5.0 network at 4 out of 4 bars signal strength. Also turned security on and off and xbox 360 reported the changes in security on the 5.0 network.
So the xbox 360 is definitely seening the 5.0 network. and can tell if it is running WPA2 or not.
If it can see the 5.0 network and recognizes what security and network type (infrastructure) is set, would would stop it from connecting to the WRT610n router and getting an IP address? No mac filters or firewalls are set and, again, connects just fine and gets an ip address if I select the 2.4 (network1 ssid) instead.
Won't work if I manually set IP, subnet, gateway, dns either.
Have tried mixed versus dedicated on the N radio...
Any suggestions would be appreciated.
thanks!
rjb

Hello,
Thanks for the suggestions. Tried as you suggested but still no luck. Seems to see the 5ghz ssid just fine with plenty of strength but just will not pull an ip address or even connect if I manually assign.
Any other thoughts?
thanks again for taking the time to respond.
rjb

Just got new ipad2 and can't connect to internet...recognizes wifi network but won't connect

just got a new ipad2...recognizes wifi network at home, but can't connect to internet...help???

I just had a similar problem. Both the ipad 1 and ipad 2 in my household quit connecting to the network even though it seemed to recognize it. if you think it is recognizing your network, just not connecting, check to see if bluetooth is turned on. i had to turn bluetooth off and then manually enter the DNS number.
My solution also came after I re-started my network and reset all the settings on the ipad2. The DNS number then showed along with IP submet Mask and router. I used that dns number to enter into ipad1 after turning bluetooth off on it.
Totally unscientific fix that may have been more coincidental than correct but you might try it. BTW--no idea how bluetooth even got turned on to begin with.

After connecting to Bluetooth keyboard, iPad 2 will not connect to Internet (wifi) at all. Wifi is ok, have tried turning off bltooth, wifi on iPad. It sees the network but won't connect. Help? Have also reset network settings etc

My iPad wifi was working great until I I connected it by Bluetooth to a keyboard (zagg). It was the first time I'd used Bluetooth
Immediately Internet was dropped on my ipad. My iPhone was and is still connected no prob. And I cannot get the iPad wifi to work again....at all!!!
This is major as I am away from my desktop for three months. Any fix cannot involve being at my desktop with iTunes which is 10,000 km away
So far This is what I've tried based on other discussions-
-turned Bluetooth off and unpaired to keyboard which was also turned off
- turned iPad wifi off and on (several times)
- forgot the network I useArrive Jul 19 depart Aug 25th. Originally it was Sept 9.
-- reset network settings
What happens is that the iPad sees the network and I enter my password. But, instead of getting "check mark" indicating a successful connections it keeps "circling". Sometimes the airport bars will show, but disappear or flicker. It never connects with a check noted in settings. Any attempts to use internet confirm there is no connection
My network is not a cafe or public network. It is one I regularly use here at my family's home where I am visiting
Any ideas!

Look at iOS Troubleshooting Wi-Fi networks and connections http://support.apple.com/kb/TS1398
iPad: Issues connecting to Wi-Fi networks http://support.apple.com/kb/ts3304
iOS: Recommended settings for Wi-Fi routers and access points http://support.apple.com/kb/HT4199
Additional things to try.
Try this first. Turn Off your iPad. Then turn Off (disconnect power cord) the wireless router & then back On. Now boot your iPad. Hopefully it will see the WiFi.
Go to Settings>Wi-Fi and turn Off. Then while at Settings>Wi-Fi, turn back On and chose a Network.
Change the channel on your wireless router. Instructions at http://macintoshhowto.com/advanced/how-to-get-a-good-range-on-your-wireless-netw ork.html
Another thing to try - Go into your router security settings and change from WEP to WPA with AES.
How to Quickly Fix iPad 3 Wi-Fi Reception Problems
http://osxdaily.com/2012/03/21/fix-new-ipad-3-wi-fi-reception-problems/
If none of the above suggestions work, look at this link.
iPad Wi-Fi Problems: Comprehensive List of Fixes
http://appletoolbox.com/2010/04/ipad-wi-fi-problems-comprehensive-list-of-fixes/
Fix iPad Wifi Connection and Signal Issues http://www.youtube.com/watch?v=uwWtIG5jUxE
Unable to Connect After iOS Update - saw this solution on another post.
https://discussions.apple.com/thread/4010130?tstart=60
Note - When troubleshooting wifi connection problems, don't hold your iPad by hand. There have been a few reports that holding the iPad by hand, seems to attenuate the wifi signal.
~~~~~~~~~~~~~~~
If any of the above solutions work, please post back what solved your problem. It will help others with the same problem.
 Cheers, Tom

Not able to connect to wifi using iPhone 4 with OS5, sees the network but won't connect.

Recently upgraded my iPhone 4 to the OS5 and I keep having sporadic issues with connecting to my home wifi, it sees the network but never connects. I turned of Location Services and Cellular Data for that had worked sometimes, but now it just keeps spining and never connects. I tried to reset network settings, reset my wifi router and reset my phone and nothing, it will connect at my church for example and other places but not at home. I have MAC addressing security set on my router and I verified my iPhone MAC address is authorized. Any other suggestions?

Try restarting your router first, turn it off for a minute then back on. then go to settings on your phone, then wifi, tap on the blue arrow to the right of your wifi 's name, then tap forget this network. Then go to the home screen, Then hold the home and off button down until the apple symbol comes up. Then go back into wifi and try to connect.

My mac can see the network but won't connect to the server

I have an intel Imac. The network connect is working but very squirrelly. I see most objects on the network. I can see the server but it will not let me connect.
I go to another mac and I can connect to the server. So I think its my mac 10.7.5 is the OS

Probably nothign to do with your iMac or OS X, have you attempted resetting your router? Also you haven't stated what messages you are getting or any other information. If this is at your work then I'd suggest contacting your IT support person, the connection to your network may be on their end.

G5 Gigabyte Built-in Network Adapter won't connect at 1000

Similar Messages

Maybe you are looking for