G5-Mirror Door Locks when not connected to Ethernet

G5-1.25mz Mirror Door, just got a new hard drive and a complete, start from basic clean install with 10.4.7 disc. When NOT connected to the ethernet (thru the appropriate Cat5 cable), the unit runs fine. BUT WHEN HOOKED UP TO THE ETHERNET, IT LOCKS UP ALMOST IMMEDIATELY.
What has died, where. No other unit in the studio is suffering from ethernet issues. We have tried hooking this unit up to alternate locations, and it still happens.

hmm..that is interesting. so, you are saying the unit runs normally until you plug in a cat5 cable to the ethernet port?
well, that is not run of the mill at all.
if you have already tried different locations, different cables, different hubs, etc... then next is to assume it is the computer causing the issue.
you can reset your network settings to a default to see if that fixes it.
quickest way is to remove /library/preference/systemconfiguratin folder and then restart. ( this will reset your network settings completely
i would also try a PMU reset.
http://docs.info.apple.com/article.html?artnum=300341

Similar Messages

  • My time capsule seemed to have given up so I have just got a net gear router, I have no problem connecting  wirelessly but when I connect an Ethernet cable it says it's connected but pages will not load

    My time capsule seemed to have given up so I have just got a net gear router, I have no problem connecting  wirelessly but when I connect an Ethernet cable it says it's connected but pages will not load

    Do a factory reset .. nothing will be deleted from your backups and you will be able to get access to them again.
    The Factory Reset Gen1-4.
    Unplug your TC. Hold in reset. and power the TC back on.. without releasing reset for about 10sec. When the status light flashes rapidly; release it.
    Be Gentle! Feel the switch click on. It has a positive feel..  add no more pressure after that.
    TC will reboot after a couple of minutes with default factory settings and will wipe out previous configurations.
    No files are deleted on the hard disk.. No reset of the TC deletes files.. to do that you use erase from the airport utility.

  • Why would my iPod show a full battery when connected to power but when not connected it will no longer turn on

    Why would my iPod show a full battery when connected to power but when not connected it will no longer turn on

    For both
    Try:
    - iOS: Not responding or does not turn on
    - Also try DFU mode after try recovery mode
    How to put iPod touch / iPhone into DFU mode « Karthik's scribblings
    - If not successful and you can't fully turn the iOS device fully off, let the battery fully drain. After charging for an least an hour try the above again.
    - Try on another computer
    - If still not successful that usually indicates a hardware problem and an appointment at the Genius Bar of an Apple store is in order.
    Apple Retail Store - Genius Bar       

  • How to copy catalog from external hard drive to computer hard drive to use smart previews when not connected to external hard drive?

    I am very new to LR5. I have LR5 set up so that my catalog and photos are on an external hard drive. I found out that when not connected to the hard drive, LR5 cannot find my catalog, therefore, I cannot do any editing in smart previews unless connected to the external hard drive. How can I fix this issue so that I can edit photos without being connected to the external hard drive. Is there a way of copying the catalog off the hard drive on the computer hard drive or do I need to reestablish a new catalog using LR5? Does the catalog always need to be loaded on the hard drive? Thank you in advance.

    Yes that is correct. The LR catalog must be on the computers internal drive. Then when you have Smart Previews enabled you can edit image without having the drive they are on connected. Then when you connect that drive the images will be updated.
    Just COPY those 4 folders over to your internal drive to a folder called Lightroom Catalog that you create. Then Open LR and go to the File menu item and select Open Catalog. Browse to the folder you created called Lightroom Catalog and select the Lightroom 5 Catalog.lrcat file and click Open. Once Lightroom restarts open the preferences, Edit>Preferences, and on the General Tab in the Default Catalog section make sure "When starting up use this catalog:" area lists where you have copied those folders. Something like Macintosh HD/Wherever you created that folder/That folder name/Lightroom 5 catalog.lrcat.

  • How do you Sync Cals and Contacts when not connected to internet?

    I Often take my macbook along with me to work. I cannot connect to the internet there. MacBook is set to use MobileMe. When I sync my iPhone 3G with my MB it wont sync updates I made on the laptop. When I go into the info tab in iTunes it states it will update by air. Is there a way to manually update these items when not connected to the internet?

    I sync two iPhones and an iPad with one iTunes library on the same computer and each device has different content. Each device has its own sync preferences with iTunes. You can transfer the same music and apps to each device or different music and apps.
    Are you sharing the same Apple ID or iTunes account?

  • How do I save internet article/info to read when not connected to Internet?

    Re iPad mini ios7:  I do not have internet at home, & want  to save articles/info/book pages etc while connected  to I WiFi in public place, to read when not connected at home.  Have tried ''add to home screen' , 'add to reading list', & 'bookmark'' , but am not succeeding.  Help?

    use pocket
    https://getpocket.com/

  • My Itunes locks when I connect my Ipod classic. I have the latest version of Itunes as of 10/31/11.  Any fixes???

    My Itunes locks when I connect my Ipod classic.  I have the latest version of Itunes as of 10/31/11.  Anyone have any fixes?

    Close your iTunes,
    Go to command Prompt -
    (Win 7/Vista) - START/ALL PROGRAMS/ACCESSORIES, right mouse click "Command Prompt", choose "Run as Administrator".
    (Win XP SP2 n above) - START/ALL PROGRAMS/ACCESSORIES/Command Prompt
    In the "Command Prompt" screen, type in
    netsh winsock reset
    Hit "ENTER" key
    Restart your computer.
    If you do get a prompt after restart windows to remap LSP, just click NO.
    Now launch your iTunes and see if it is working now.
    If you are still having these type of problems after trying the winsock reset, refer to this article to identify which software in your system is inserting LSP:
    Apple software on Windows: May see performance issues and blank iTunes Store
    http://support.apple.com/kb/TS4123?viewlocale=en_US

  • IPhone is 17 month old and shutting down when not connected to the mac any this I can do about it?

    iPhone is 17 month old and shutting down when not connected to the mac any this I can do about it?
    should I bring it to apple ?

    Basic troubleshooting from the User's Guide is reset, restart, restore (first from backup then as new).  Try each of these steps in order until the issue is resolved.
    Replacing or even suggesting replacing hardware without doing basic troubleshooting first is not very smart.
    If basic troubleshooting does not resolve, take it to Apple for evaluation.  There is no obligation to pay for anything, the evaluation is free.

  • How do I add an offline translation to the Bible app to use it when not connected to a network?

    How do I add an offline translation to the Bible app to use it when not connected to a network?

    You will need to contact the developer of the app and ask if that is possible. If not, you'll need to look for another app that doesn't require a network connection to function.
    Regards.

  • SIM card locks when I connect to my computer

    Hi,
    For some reason, my iphone's SIM card regularly locks when I connect to my MacBook Pro.
    This means...without me always having time to see it, that my phone is basically out of use when I think it is charging or synching. Quite annoying, is there anything I should do about this?
    I called my telephone carrier and they said they'd never heard of this problem that

    Two things you can check that may be causing this: 1. Settings>Phone>Sim Pin do you have a sim pin enabled? 2. Some carriers require a PUK lock on all their sims, in the US you can get instructions on how to unlock the sim by using the PUK code online in your account info. I'm guessing that your sim either has a sim pin enabled or a PUK lock. If the latter, your carrier will need to supply the PUK code. Or, get a new sim.

  • HT4993 why does my internet not work when not connected to wifi?

    why does my internet not work when not connected to wifi

    Hi farmgirl0812,
    Thanks for using Apple Support Communities.  This article has steps to try if you are unable to connect to a cellular network:
    iPhone: Troubleshooting a cellular data connection
    http://support.apple.com/kb/ts3780
    Cheers,
    - Ari

  • HT4623 i am having a problem with my iphone 4s. it is not displaying its volume bar in music or anywhere when not connected to earphones. kindly help me with its volume settings.

    i am having a problem with my iphone 4s. it is not displaying its volume bar in music or anywhere when not connected to earphones. kindly help me with its volume settings.

    Have you tried the restart/reset/restore troubleshooting path?  That would be the best initial set of steps to take, particularly in a situation like this.  

  • Voice  control when not connected to internet

    Is it possible to use voice control with a touch 5 when not connected to internet?  when I hold down the home button or the mic on earpod remote all I get is a message that siri is not available and am instructed to connect internet.  Does voice control (for music for example)  not exist unless I have internet and this bloody accursed siri on? 

    Thanks I had already seen that but as I said I kept getting the message about Sire not being available.  I talked to AppleCare and the secret, if anyone else has the problem,  is you must disable Siri in settings before using the voice control.
    Thanks for your time.
    Arthur

  • Macbook running slow when not connected to charger

    My Macbook Pro 13" is running slow when not connected to energy.
    Does anyone know why is that happening, how can I fix it?
    Thank you very much.
    if you have any idea.
    Att
    Raissa
    <Email Edited By Host>

    Reset SMC.     http://support.apple.com/kb/HT3964
    Choose the method for:
    "Resetting SMC on portables with a battery you should not remove on your own".
    Best.

  • How can I access all my music when NOT connected to internet? I feet a few of the new ones I purchased but every other song is in grey mode. Meaning they won't play

    How can I access all my music when NOT connected to the internet? I find that the playlists are all grey and the newest bought are the only black ones there fore the only ones playable. How can I access them all with only battery power?

    Nevermind...I did what it said to do in the article and it worked!

Maybe you are looking for

  • FMs to Check for Duplicate FI Invoices

    Std FMs to check whether a FI invoice is parked or posted.

  • PDF Printer not working with Acrobat 8 & Vista Ultimate 64bit

    I have not been able to print pdf's.  I am uptodate on upgrades and have installed, reinstalled printers and repaired the program etc. When I install an adobe printer I get the Adobe PDF Converter.  When I try to print with it, I get an audible failu

  • RMAN backup on the physical standby database.

    Hello, 11.2.0.3 EE database. Is it a requirement to open the database in read only mode in order to take a hot backup? SQL>ALTER DATABASE RECOVER MANAGED STANDBY DATABASE CANCEL; SQL> ALTER DATABASE OPEN READ ONLY; I've initiated a rman backup withou

  • Parent Child forms

    Hi, I've only just started playing with swing forms, I've created a few and now I've decided that I want some to be parent frames and some to be child frames - what's the best way to go about this? A little explaination I have a main login panel then

  • Trouble downloading dw from creative cloud

    I am administrator and keep getting an error message that I need administrative priviledges to download Dreamweaver from Creative Cloud.  And then I have to close the error message window.  ?????? Does anyone know what is going on here?