G5 no status light and USB current warnings - anyone seen this before..
Hi,
Just got an old G5 that had not been used in a while... Pressing the power button boots the system fine.. However, the Status/Power light does not appear...!!!...
After a while the system throws lots of USB Over current messages on the screen even with ALL usb devices removed..
I have reset PMC and SMU etc...
Anything else I can try - or is it a Logic board prob.. ?
Many Thanks for any tips..
Best Regs Neil
Hi Neil,
Might be time to replace the PRAM Battery, 4 years is close to their lifespan, far less if ever without AC power, & can cause strange startup problems...
See which one your G5 has...
http://eshop.macsales.com/item/Newer%20Technology/CR2032/
http://eshop.macsales.com/item/Newer%20Technology/BAA36VPRAM/
Similar Messages
-
Has anyone seen this issue before?
Possibly. Do you have other devices and will they connect?
One possible thing that it could be is that the USB port on your iPad has gone bad. It happened to mine. Couldn't sync, could barely charge (it said 'not charging' even when plugged into the wall)
I'd take it to the apple store, see if they can replicate it, and if they can, then they can diagnose it. Just back it up before you go, in case they do exchange it. -
I have what looked like a small bug that ran up and down the screen and then sudenly stopped in center upper half of screen and now appears to be burned in to the inside of the screen, anyone had this probelm before and what can be done about it?
Thanks for the suggestion, the next step was to call Apple, who gave me a claim number, which I discovered you must have to get anything done with them. They refered me to a Apple store or repair center, after some reseach took it to the Computer Store in Mobile, Alabama and they were excellent. They took pictures of the screen with bug submitted it to Apple who denied the claim but they kept kicking it up to the next level and finally Apple agreed to sent new cover. The Computer Store had the cover the next day, they changed it out and now I am bug free. If your in the area of Mobile Alabama you can feel good about getting help from the Computer Store. For the two folks that responded to my note, Thank You, good comments and good advice.
-
I have tried repairing permissions. I have tried stopping the service both from the Server app and terminal. I have searched and searched online and can't figure this out. Any assistance is greatly appreciated!
Hi there,
You're running an old version of Safari. Before troubleshooting, try updating it to the latest version: 6.0. You can do this by clicking the Apple logo in the top left, then clicking Software update.
You can also update to the latest version of OS X, 10.8 Mountain Lion, from the Mac App Store for $19.99, which will automatically install Safari 6 as well, but this isn't essential, only reccomended.
Thanks, let me know if the update helps,
Nathan -
I just loaded os 5 on my iPad 2 and now all non apple apps don't work. Anyone have any idea way?
Have you tried basics from the manual?
Restart.
Reset.
Restore. -
My phone's display has changed as if it were stretched like we can do with photo's except it affects the whole phone. It won't go back to a normal display even after shutting it off and restarting. Has anyone seen this and how did you resolve?
Thank you...this did the trick. I had forgotten about that zoom feature. Now I will ALWAYS remeber it!
Thank you,
Deb -
i am trying to set up an airdisk that is connected to my parents airport extreme,
though next to my iCloud account details i get a yellow status light and can't get a hold on to the airdisk when i'm being connected to a different internet connection..what should i do?
sharing is enabled and i entered the right account details.
the disk shows up connected to my parents network, but i want to access it from my place as wellEncryption wouldn't matter except for Wifi.
While 10.2 might help, there's not much you can do on the Internet these days with less than 10.4.11
Tiger Requirements...
To use Mac OS X 10.4 Tiger, your Macintosh needs:
* A PowerPC G3, G4, or G5 processor
* Built-in FireWire
* At least 256 MB of RAM (I recommend 1GB minimum)
* DVD drive (DVD-ROM), Combo (CD-RW/DVD-ROM) or SuperDrive (DVD-R) for installation
* At least 3 GB of free disk space; 4 GB if you install the XCode 2 Developer Tools (I recommend 20GB minimum)
http://support.apple.com/kb/HT1514
http://www.ebay.com/sch/i.html?_nkw=mac+os+x+tiger+retail+10.4
See Tom's, (Texas Mac Man), great info on where/how to find/get Tiger...
https://discussions.apple.com/message/15305521#15305521
Or Ali Brown's great info on where/how to find/get Tiger...
http://discussions.apple.com/thread.jspa?messageID=10381710#10381710
As far as Memory, that's sort of easy, find your eMac here...
http://eshop.macsales.com/MyOWC/Models.cfm?Family=emac&sType=Memory
As far as Hard Drive, it's not easy to replace the Internal drive, I'd maybe suggest an external Firewire drive to boot from...
http://eshop.macsales.com/item/Other%20World%20Computing/MAU4S7500G16/ -
can't print to HP Photosmart C5180. getting error mssg that says, "Because a USB device was drawing too much power from your computer, one or more of our USB devices have been disabled." Never seen this before. How do i fix this?
Get a powered USB hub.
https://discussions.apple.com/community/notebooks/macbook_pro?view=documents -
My Apple ID has been disabled, it won't let me updated my previous purchases. No reason for why it has been disabled or how to enable it again. I reset my password, security questions and billing info. Nothing… I even called Apple SUpport 1-800 # and they said they can't help me...Anybody has seen this before?...
You need to contact itunes support.
http://www.apple.com/support/contact/
There is NO telephone support for itunes. Use the link above. -
I have never seen this before when I try to copy and paste, I get a
"Copy/cut/ paste is not available in Mozilla and firefox. Do you want more information about this issue? "
I have copied and pasted hundreds of times before with Mozilla and firefox . This just happened suddenly.
when I go to find more information on this issue, it give a long drawn out explanation I cant follow.
What happened?When you right-click the link, the page immediately tells you you can't copy, or does that occur after you choose Copy Link Location?
If it appears immediately, you can switch a setting in Firefox that should prevent sites from blocking the normal right-click menu. Here's how you would do that:
(1) In a new tab, type or paste '''about:config''' in the address bar and press Enter. Click the button promising to be careful.
(2) In the search box above the list, type or paste '''context''' and pause while the list is filtered
(3) Double-click the '''dom.event.contextmenu.enabled''' preference to switch it from true to false.
This setting does have a complication: On Google Maps and other sites that have their own right-click menu, Firefox's menu then will block the site's menu. To clear Firefox's menu so you can access the site's menu tap either the Alt key or Esc key once (but sometimes Esc removes both). -
Under the iCloud portion of settings on my iPhone, I have always gotten the message "account not verified". The email matches and is in fact the same for my accounts on iCloud and iTunes. Has anyone had this problem, and how have they resolved it?
Hello megalina23
You need to verify the email address associated with the Apple ID. Check out the article below on how to do this.
Associating and verifying email addresses with your Apple ID
http://support.apple.com/kb/HE68
Thanks for using Apple Support Communities.
Regards,
-Norm G. -
We've just now upgraded from Leopard to Snow Leopard and are having a problem with Apple ProRes 4444 and alpha channels in Motion 4. A clip with an alpha which keyed perfectly before the upgrade, now will not key. If I convert the clip to the Animation codec, it keys perfectly. If I export the Motion project as a ProRes 4444 self contained movie, it will key when brought into FCP 7 but if I import the project into FCP 7, it will show the key in the viewer but not the canvas. Has anyone seen this or have any suggestions on how to correct this? Is it a bug?
Thanks,Motion 4.0.3
It just doesn't seem to recognize the alpha at all. -
Is anyone else having the finish rub off of the keys on their macbook? I've had mine for about 6 months and several keys look like the finish is wearing through. I went to the local genius bar today and the techs said they'd never seen this before.
Some people have seen their aluminum uni-body discoloring due to body oils. Go figure.
Normally putting anything over the keys/aluminum will hurt heat disspation, but you may need to use keyboard covers.
Or save up $500/year for new keyboards.
Neither is supposed to be a sarcastic answer. Either one could end up being the solution.
Good luck with it. -
Help - I turn my Apple air on and get a message asking for my keychain password - I enter my password but it doesn't work. I've never seen this before. What do I do?
This may help.
http://support.apple.com/kb/TS5362?viewlocale=en_US -
My dumb *** may have down loaded a trojan or virus while down loading torrents. My menu and windows change color and pattern now. Anyone have this happen before? I repaired the permissions and everything was fixed except one.
Warning: SUID file “System/Library/CoreServices/RemoteManagement/ARDAgent.app/Contents/MacOS/ARDAg ent” has been modified and will not be repaired.You didn't do anything wrong.
Not malware or a virus.
But how do you explain this?
My menu and windows change color and pattern now.
Maybe you are looking for
-
Why won't my ipod touch 5G connect to my computer or itunes? I've tried new USB cables, different USB ports and uninstalling itunes and reinstalling.
-
envy j001tx I performed a disk recovery (with disks made myself) to wipe the hard drive. Got to disk 6 of 6 when HP Recovery Manager window appeared with following error message when I click the Details button: ctoerror.flg file [21:12:12.07] ChkErrB
-
[10g/8i] Need help calculating a hierarchical total
Hi all... I am trying to determine the total quantity of each unique part number in a bill of materials (big list of parts that go into a final product). The total needs to take into account the quantity of the parent parts--what I mean by this is, i
-
Function Level on OAF Personalization Cannot be edited
Hello, Can anyone tell me how to enable the Function Level on Personalization as it is Read Only now and i cannot edit on this Level while other level like Site Level and Responsibility Level are enabled, Notice that it was enabled before and i made
-
When i run acroread I get this error, I have installed it from aur: (acroread:10199): Gtk-WARNING **: Unable to locate theme engine in module_path: "adwaita", (acroread:10199): Gtk-WARNING **: Unable to locate theme engine in module_path: "adwaita",