G5 Quad Shuts down Automatically
Hi, i have a G5 2.5GHz Quad, i am using it for Final Cut Studio.
My problem is, when i am working on any application, the system shuts down automatically. once replaced the RAM it worked fine, but now again the same problem.
i would really appreciate if anybody can get me out of this problem.
On the basis of the info. you have provided:
I have not found an Official Explanation of the "PMU -122" error code.
As RAM changes provided a temporary fix, you could try -
Run the Apple Hardware Test and Memtest - link at the bottom of page here
http://www.thexlab.com/faqs/aht.html
Note - it doesn't find all RAM problems.
If no problems are found
Remove any RAM that was not supplied by Apple with the G5.
Also you could disconnect all non-essential peripherals and leaving just display, keyboard and mouse; unplug from the mains and leave for at least 30 mins; re-connect mains plug to G5(to earth the casing), then reset the SMU/PMU
http://docs.info.apple.com/article.html?artnum=300341
Note static precautions and the warning to press the button once only.
Then boot from the supplied system DVD and Repair disc and permissions
http://docs.info.apple.com/article.html?path=DiskUtility/10.5/en/duh1018.html
If after this, the problem does not re-occur you could try progressively replacing the additional non-original RAM in pairs and see if it still runs ok at each stage.
If none of this helps, it may be time to contact AppleCare.
Similar Messages
-
Hi everyone... Last Wednesday my iPhone 4 shut down automatically... I had battery. It took about a half an hour to reboot it. After that I started having trouble with going in and out of service and battery drainage. I do have that update 5 ios... or whatever its called... but I did that about 2-3 months ago and had no problems. I called Apple and they wouldn't do a **** thing for me. I called AT&T and they reset the network... didn't work. I did a hard shut down and didn't work. Now today, every call I had was dropped. So of course this morning when I woke up at like 8:30 am by 10:30 am my battery went from 100% to 35%. ***. Can someone help me???
Hi everyone... Last Wednesday my iPhone 4 shut down automatically... I had battery. It took about a half an hour to reboot it. After that I started having trouble with going in and out of service and battery drainage. I do have that update 5 ios... or whatever its called... but I did that about 2-3 months ago and had no problems. I called Apple and they wouldn't do a **** thing for me. I called AT&T and they reset the network... didn't work. I did a hard shut down and didn't work. Now today, every call I had was dropped. So of course this morning when I woke up at like 8:30 am by 10:30 am my battery went from 100% to 35%. ***. Can someone help me???
-
How can I get firefox to shut down automatically when not in use for an hour
How can I get firefox to shut down automatically when not in use for an hour
Sorry, there is no feature for that built into Firefox, and I haven't seen an add-on to add that feature to Firefox.
-
Good morning There is a stop at the camera Please help me When you turn on the camera Shut down automatically
I'm in iraqAdobe Reader is free. It always has been.
You have obviously downloaded and installed Acrobat (30 day trial version) and the trial period has expired.
You need to uninstall Acrobat (using the Control Panel and Add/Remove Programs or Programs and Features [Vista/7])
Then run the Windows Installer Cleanup Utility http://support.microsoft.com/kb/290301
to completely remove the Acrobat installer files.
Then download Reader 9, install it, and go about reading PDFs for free.
EDIT: Please, please please.... do NOT post a phone number in the forums.
You're inviting trouble if you do.
Not everyone who reads these pages is here to help fellow Adobe product users.
Message was edited by: Mac+Win=Me -
WebLogic server is shut down automatically
After i install weblogic6.1 and run default server, I got the fowllowing message
and then server is shut down automatically, I tried it days before, and it works,
why not work now?
Thanks in advance!
moonriver
<Nov 6, 2001 11:40:53 PM EST> <Notice> <Management> <Starting discovery of Managed
Server... This feature is on by default, you may turn this off by passing -Dweblogic.management.discover=false>
<Nov 6, 2001 11:40:58 PM EST> <Notice> <Management> <Application Poller not started
for production server.>
<Nov 6, 2001 11:40:58 PM EST> <Emergency> <WebLogicServer> <Unable to create a
server socket for port: 7002. java.net.BindException: Address in use: JVM_Bind
Perhaps another process is using port 7002.>
<Nov 6, 2001 11:40:58 PM EST> <Emergency> <WebLogicServer> <The WebLogic Server
is no longer listening for connections. You should probably restart it.>
<Nov 6, 2001 11:40:58 PM EST> <Alert> <WebLogicServer> <Server shutdown has been
requested by system>
<Nov 6, 2001 11:40:58 PM EST> <Alert> <WebLogicServer> <The shutdown sequence
has been initiated.>
<Nov 6, 2001 11:40:58 PM EST> <Emergency> <WebLogicServer> <Unable to create a
server socket for port: 7001. java.net.BindException: Address in use: JVM_Bind
Perhaps another process is using port 7001.>
<Nov 6, 2001 11:40:58 PM EST> <Alert> <WebLogicServer> <Server shutdown has been
requested by system>
<Nov 6, 2001 11:40:58 PM EST> <Alert> <WebLogicServer> <The shutdown sequence
has been initiated.>
<Nov 6, 2001 11:41:58 PM EST> <Notice> <WebLogicServer> <Started WebLogic AdminServer
"myserver" for domain "mydomain" running in Production Mode>
Most likely you have another WebLogic instance already listening on 7001.
Moonriver Sun <[email protected]> wrote:
> After i install weblogic6.1 and run default server, I got the fowllowing message
> and then server is shut down automatically, I tried it days before, and it works,
> why not work now?
> Thanks in advance!
> moonriver
> -----------------
> <Nov 6, 2001 11:40:53 PM EST> <Notice> <Management> <Starting discovery of Managed
> Server... This feature is on by default, you may turn this off by passing -Dweblogic.management.discover=false>
> <Nov 6, 2001 11:40:58 PM EST> <Notice> <Management> <Application Poller not started
> for production server.>
> <Nov 6, 2001 11:40:58 PM EST> <Emergency> <WebLogicServer> <Unable to create a
> server socket for port: 7002. java.net.BindException: Address in use: JVM_Bind
> Perhaps another process is using port 7002.>
> <Nov 6, 2001 11:40:58 PM EST> <Emergency> <WebLogicServer> <The WebLogic Server
> is no longer listening for connections. You should probably restart it.>
> <Nov 6, 2001 11:40:58 PM EST> <Alert> <WebLogicServer> <Server shutdown has been
> requested by system>
> <Nov 6, 2001 11:40:58 PM EST> <Alert> <WebLogicServer> <The shutdown sequence
> has been initiated.>
> <Nov 6, 2001 11:40:58 PM EST> <Emergency> <WebLogicServer> <Unable to create a
> server socket for port: 7001. java.net.BindException: Address in use: JVM_Bind
> Perhaps another process is using port 7001.>
> <Nov 6, 2001 11:40:58 PM EST> <Alert> <WebLogicServer> <Server shutdown has been
> requested by system>
> <Nov 6, 2001 11:40:58 PM EST> <Alert> <WebLogicServer> <The shutdown sequence
> has been initiated.>
> <Nov 6, 2001 11:41:58 PM EST> <Notice> <WebLogicServer> <Started WebLogic AdminServer
> "myserver" for domain "mydomain" running in Production Mode>
Dimitri
-
WebLogic server is shut down automatically(in win2k pro)
After i install weblogic6.1 and run default server, I got the fowllowing message
and then server is shut down automatically, I tried it days before, and it works,
why not work now?
Thanks in advance!
moonriver
<Nov 6, 2001 11:40:53 PM EST> <Notice> <Management> <Starting discovery of Managed
Server... This feature is on by default, you may turn this off by passing -Dweblogic.management.discover=false>
<Nov 6, 2001 11:40:58 PM EST> <Notice> <Management> <Application Poller not started
for production server.>
<Nov 6, 2001 11:40:58 PM EST> <Emergency> <WebLogicServer> <Unable to create a
server socket for port: 7002. java.net.BindException: Address in use: JVM_Bind
Perhaps another process is using port 7002.>
<Nov 6, 2001 11:40:58 PM EST> <Emergency> <WebLogicServer> <The WebLogic Server
is no longer listening for connections. You should probably restart it.>
<Nov 6, 2001 11:40:58 PM EST> <Alert> <WebLogicServer> <Server shutdown has been
requested by system>
<Nov 6, 2001 11:40:58 PM EST> <Alert> <WebLogicServer> <The shutdown sequence
has been initiated.>
<Nov 6, 2001 11:40:58 PM EST> <Emergency> <WebLogicServer> <Unable to create a
server socket for port: 7001. java.net.BindException: Address in use: JVM_Bind
Perhaps another process is using port 7001.>
<Nov 6, 2001 11:40:58 PM EST> <Alert> <WebLogicServer> <Server shutdown has been
requested by system>
<Nov 6, 2001 11:40:58 PM EST> <Alert> <WebLogicServer> <The shutdown sequence
has been initiated.>
<Nov 6, 2001 11:41:58 PM EST> <Notice> <WebLogicServer> <Started WebLogic AdminServer
"myserver" for domain "mydomain" running in Production Mode>[att1.html]
-
hi, 3 weeks ago i just got my iphone4 for and then i upgraded it to iOS5..am just wondrin', does changing or upgrading the OS causes the phone to shuts down automatically and turn on again? thanks.. =)
How long are you leaving it on the charger?
Are you connecting it directly to an electrical outlet or trying to charge via USB? USB may not provide enough power to adequately charge the device if the battery is that low.
If none of that helps, then the only option would be a warranty replacement as either the battery or system board is bad. -
My iPad acting so weird tonight. When it shut down automatically because the battery has been drained. When I opened it, it creates some weird sounds like *swoosh* blahblah. It does make me feel nervous. Can someone help me? Does it already broken?
adetoye50 wrote:
Dear Contacts Journal Support Team,
FYI, this is a user to user support forum. You are NOT addressing Apple here.
Honestly, I doubt anyone is really going to take the time to read the novel you have written. -
MacBook shut down automatically when rebooting
I have The following problem after installing mac osx lion on my Mac book: The computer shuts down automatically few seconds after i reboot The computer. Please help. I checked The disk utility but there are nô errors on The disk.
Hi
Have you solve your problem yet? Mine was the same - it's Dockables "fault"
Were you able to boot into Safe Mode, by pressing and holding Shift key at Start up, I think you need to press and hold a while, till you see a progress bar below the Apple logo.
Then you can quickly go and delete all the Dockables.
If you found another way to boot up, also delete Dockables immediately.
Cheers -
my phone just shut down automatically and i've just bought in not more than a month !! OmG
And now i cant switch it on ... How?First plug it into a charger and wait at least 15 to 20 minutes to give the battery some charge in case the battery has completely discharged.
Then press both the Home and Power On button together for some 15 seconds or so until the apple logo appears (ignore the power off red slider if it appears and keep on holding the buttons). Let go when the apple logo appears and wait until the iPhone resets and restarts.
Hope this helps. -
QuickTime Player Shut Down Automatically!!!!!!?
Recently I purchased the new iMac 27 inch late 2012 with OS X 10.8.4.
Later on, I learned that there is something wrong with QuickTime Player.
Every time when I tried to play a MP4 video, QuickTime Player shut down automatically.
I also cannot create new video, audio, and screen recording.
When I ever tried it, it again shut down by itself.
I saved the error message in TextEdit, and shared it here.
Feel free to take a look, and see if anyone know how to fix it.
Thank you~Please read this whole message before doing anything.
This procedure is a test, not a solution. Don’t be disappointed when you find that nothing has changed after you complete it.
Step 1
The purpose of this step is to determine whether the problem is localized to your user account.
Enable guest logins* and log in as Guest. Don't use the Safari-only “Guest User” login created by “Find My Mac.”
While logged in as Guest, you won’t have access to any of your personal files or settings. Applications will behave as if you were running them for the first time. Don’t be alarmed by this; it’s normal. If you need any passwords or other personal data in order to complete the test, memorize, print, or write them down before you begin.
Test while logged in as Guest. Same problem?
After testing, log out of the guest account and, in your own account, disable it if you wish. Any files you created in the guest account will be deleted automatically when you log out of it.
*Note: If you’ve activated “Find My Mac” or FileVault, then you can’t enable the Guest account. The “Guest User” login created by “Find My Mac” is not the same. Create a new account in which to test, and delete it, including its home folder, after testing.
Step 2
The purpose of this step is to determine whether the problem is caused by third-party system modifications that load automatically at startup or login, by a peripheral device, or by corruption of certain system caches.
Disconnect all wired peripherals except those needed for the test, and remove all aftermarket expansion cards. Boot in safe mode and log in to the account with the problem. Note: If FileVault is enabled, or if a firmware password is set, or if the boot volume is a software RAID, you can’t do this. Ask for further instructions.
Safe mode is much slower to boot and run than normal, and some things won’t work at all, including sound output and Wi-Fi on certain iMacs. The next normal boot may also be somewhat slow.
The login screen appears even if you usually log in automatically. You must know your login password in order to log in. If you’ve forgotten the password, you will need to reset it before you begin.
Test while in safe mode. Same problem?
After testing, reboot as usual (i.e., not in safe mode) and verify that you still have the problem. Post the results of steps 1 and 2. -
MSI CX623 shut down automatically
I have a notebook MSI cx623 with next configuration: Intel Core I3 390m 2.66Ghz, 4GB RAM, video dedicated Nvidia Geforce 310m 1GB and HDD WD 320 GB
And I have next problem: this shut down automatically without any warning and if i want to start back I must disconnect it from the power and remove battery about 2 secondGuess not, huh.
Seems like such an obvious feature?
C. -
Premiere Elements 10 on Vista freezes and shut down automatically.
I have a recently bought Adobe Premiere Elements 10 for Windows Vista. After initializing the software and start editing videos, in about 5 minutes it freezes, an error message pops-up and the program automatically shuts down. I have already uninstalled and reinstalled the software, and the license key is correct, but it insists in shut down automatically, what should I do?
PC settings:
160 gb Hard Drive/ 22gb free space
processor: Pentium Dual Core T4200 @ 2.00 ghz 2.00 ghz
RAM: 4 gb
Windows Vista 32 bitMy 3 hard drives to edit AVCHD are configured as...
1 - 320Gig Boot for Win7 64bit Pro and all program installs
2 - 320Gig data for Win7 paging swap file and video project files
When I create a project on #2 drive, the various work files follow,
so my boot drive is not used for the media cache folder and files
3 - 1Terabyte data for all video files... input & output files (*)
(*) for 4 drives, drive 3 all source files & drive 4 all output files
Search Microsoft to find out how to redirect your Windows paging swap file
http://search.microsoft.com/search.aspx?mkt=en-US&setlang=en-US
http://www.video2brain.com/en/videos-5353.htm
http://forums.adobe.com/thread/784220?tstart=0
Trying to use only ONE Hard Drive for Video Editing
You are a music conductor, with a baton that you use to point to various parts of the orchestra... this is like Windows pointing to various parts of the hard drive to do Windows housekeeping or to load program segments for various functions
Now, at the same time and with the same hand... while still using the baton to conduct the orchestra... pick up a bow and play a fiddle... this would be doing something with your video file at the same time as all the other work
You as a person cannot do both at the same time with the same hand
A computer is a LITTLE better, in that it can switch from one kind of task to another very quickly... but not quickly enough for EASY video editing
You need AT LEAST two hard drives (separate drives, never a partition http://forums.adobe.com/thread/650708 for more) with Windows (or Mac OS) and software on your boot drive, and video files on a 2nd drive so the boot drive is not slowed down by trying to do everything
Partition = Crash http://forums.adobe.com/thread/957286
I find that the three drives I use work very well for me, for editing AVCHD video... some people use a 4th drive, so video INPUT files are on drive three and all OUTPUT files are on drive four... I only bought a mid-tower case instead of a full tower case (my bad... but had to fit in the space available on my office desk!) so I use the three drives that will fit
Depending on your exact hardware (motherboard brand & model AND USB2 enclosure brand & model AND external hard drive brand & model) AND the type of video file, you may... or may NOT... be able to use an external USB2 hard drive for SD (Standard Definition) video editing
Steve Grisetti in the Premiere Elements forum http://forums.adobe.com/thread/856208 and Jim Simon in the Premiere Pro forum http://forums.adobe.com/thread/856433 use USB externals for editing
A USB3 hard drive connected to a motherboard with USB3 is supposed to be fast enough for video editing (I don't have such, so don't know) but eSata DOES have a fast enough data transfer for video editing... I have not used the eSata Dock below... for reference only, YMMV and all the usual disclaimers
http://www.amazon.com/Thermaltake-BlacX-eSATA-Docking-Station/dp/B001A4HAFS/ref=cm_cmu_pg_ t -
I brought a macbook air 11 inch mid 2013 since i have updated mountain lion it shuts down automatically I have done SMC reset still I have the same issue... any suggestions??/
the thing is that when i did the clean install they did check with a hardware test first and nothing was wrong, i guess it was a false-positive, is there anything in the kernel report from which i can say it's either hardware or software related
-
USB drive with install image is showing in Startup Manager on a Mac Pro, but wont boot. Showing circle with cross strip, and shut down automatically. USB device are made and work on two different MacBook Pro, but used on Mac Pro. Any help?
OS X installers have always been fairly specific, hardware-wise. I haven't read anything reflecting that situation with the Recovery HD, so it may be that the Recovery HD created for the MacBook Pro does not have the necessary drivers for the Mac Pro. Obviously, nothing definitive here, but a possibility.
Maybe you are looking for
-
Getting error while creating the user in user administration in portal
Hi folks, i am unable to create the user in user administration in portal due to the following error, could you please help regarding this issue "Current user has user creation permissions in the UME, but cannot create users in the back-end syst
-
trying to cut away from one video clip to a second one, while keeping the original sound track, works with still images imported from iPhoto, but cant get the video to drag/drop. please help thanks
-
Error in System Log: DirectoryService[26]
Hello, i have the following Error Masseage on one of our Server all the time: DirectoryService[26]: Failed Authentication return is being delayed due to over five recent auth failures for username: admin The Server is bind to AD and makes rsync to tw
-
ABAP Code to get Production Order Quantity for a material-Status REL,CRTD
hi all, I am new to SAP. I am stuck with a problem while writing a abap code for getting all the production order quantities for a material with System Status REL and CRTD. Please help me out. This is what i tried to do. IF t_mat[] IS NOT INITIAL.
-
Hello, is it posssible, with the EDK 5.1, to search a user just with his login name ? Thanks