G5 Quad three monitors, how to view FCP?

My trusty G5 Quad has two Geforce 6600 256 graphics cards, 8 gigs of ram, one 30" ACP and one 20" ACD, and a 4 channel internal sata card. I have the first two displays hooked up to the first graphics card and my Sony 34xbr910 hooked up via DVI to the second card. I want to be able to output from FCP, or quicktime, or even the dvd player, onto the Sony but all I can get to display is a desktop, which looks pretty good. I thought the controls would be in FCP but I can't find them.
How do I set this up?
Thanks
Steve

Aperture doesn't support 3 monitors

Similar Messages

Three Monitors - How to change alternate

I have three monitors connected to my Mac Pro. I like to use an alternate monitor to view my photos, but Aperture is not selecting the monitor I want as the alternate. How do I tell aperture to use a different monitor as the alternate monitor.

Aperture doesn't support 3 monitors

How to VIEW two tracks's materials SIMULTANEOUSLY and SYNCHRONIZED in MONITORS?

How to VIEW two tracks's materials SIMULTANEOUSLY and SYNCHRONIZED in MONITORS?
"Program-monitor" shows the final edited material, and "Source-monitor" shows only one track at a time, and NOT SYNCHRONIZED with the sequence. "MultiCam-monitor" shows the tracks as I need, BUT editing is very stiff: I want to do edits+cross-fades by hand IN THE TIMELEINE rather than by clicking the monitors. (Some of the "MultiCam-monitor's" other problems: 1) the timeline's time-inspector doesn't move while clicking the monitors, 2) vice-versa: monitor-image doesn't roll when the space-key is pressed for playback the timeline, 3) monitor doesn't show the cross-fades.....) I understand the "Reference-monitor" doesn't help either at this.
I would SO much like to SEE all tracks' materials simultaneously in whatever monitor, to edit efficently in the timeline.
Software: Premiere CS3 version 3.2.0
Operating System: Mac OS X (v10.4)

You can only do this in the multicamera monitor. That's what it's there for. Proper procedure is to cut there, then go to the timeline and add transitions.
If you're multicamera monitor playback isn't working correctly (I admit having a hard time understanding your points here), then try solving those.

How do i get the slideshow to display on my external monitor in extended view with powerpoint?

i have my T500 (windows 7) connected to a large external monitor with extended view. when i run powerpoint it displays the slideshow on my laptap screen instead of the external view. how can i have the presenter view show on my laptop, and the slideshow show on the external monitor/projector?
thanks!

You can do it that way, (Clone) but everything you do on your laptop will also be displayed on the monitor.
Assuming you would like the display on the external and freedom to navigate on your laptop without broadcasting, you would need to adjust your slide show settings in PowerPoint.
To use this procedure:
In PowerPoint, On the Slide Show menu, click Set Up Show.
Under Multiple monitors > Display slide show on drop down menu: select the monitor you want the slide show to appear on.

How to fix three monitors after installing latest Mac update?

I installed the latest release, OS X 10.9.3 (13D65), and now my three monitors are all messed up. I tried going into sytem preferences and looking at the monitor set up there, but nothing helped.
When I move my mouse, I never know where it is going to show up, and it does not move properly from one screen to another.
Any ideas?

From the Mac discussion forums: http://discussions.apple.com/thread.jspa?messageID=4930170&#4930170
Try this: download and retrofit (force install) QT 7.1.6 using Pacifist, then run the 10.4.10 Combo Updater for Intel Macs. Make sure it is the "combo" updater. Be sure to restart in safe mode after using Pacifist and then install/re-install the combo update (while in safe mode). For all those "non-techie" people (like myself), please try this if you already haven't and please read the instructions for Pacifist - if you use Pacifist correctly, it will ask you if you want to replace (vs. update) all of the Quicktime components (yes, you want to replace), so you will know that you are accomplishing what you need to. The first fix I tried was just to reinstall the Mac OSX10.4.10 combo update for Intel Macs and this did not work, but when I used Pacifist and then reinstalled the MacOS X combo updater (do not get this confused with the update that is not the "combo" one- (use the links), it worked! I am not a web developer, so did not have to deal with the Java 6 stuff.
Combo Intel update is here:
http://www.apple.com/downloads/macosx/apple/macosx_updates/macosx10410comboupdat ev11intel.html
QuickTime 7.1.6 is here:
http://www.apple.com/support/downloads/quicktime716formac.html
Pacifist is here:
http://www.charlessoft.com

Aperture, Mavericks, three monitors

Anyone?
I have a (late '13) 15" rMBP, and two external monitors. I would like to do two things, neither of which I know how:
1. Use the keyboard and touchpad of the laptop, but turn the laptop screen off and use only the two external monitors in a dual-monitor set-up. (Clamshell mode works great, but then I need an external keyboard and pointing device.)
2. Use all three monitors, with Aperture on the two external monitors (as primary and secondary) and either use the laptop screen for other windows/HUDS, or other programs. The problem here is that with two external monitors, Aperture mirrors the secondary display on the third display.
I had no touble running a three monitor display on Mavericks. The two external displays have DVI ports (iirc). With one, I used a DVI-MiniDisplayPort dongle. With the other, a special cable I got from NEC to goes from DVI on one end to MiniDisplayPort on the other. The MiniDisplayPort connector fits in the Thunderbolt ports of the MBP, and works. (I've been using the monitors separately in dual-monitor mode with the laptop for a while.)

if i plug in a monitor to my 2nd vid card aperture crashes too ...
i would like to be able to put aperture on three monitors as well ...
apparently we are in the minority ... i have just taken my third offline totally ... and since i use PS less and less every day and added a 30" it hasn't really been a factor for most everything else ... but i would love to have my image on the 30, my browser/project view on one 23 and the huds, etc on the other 23 ...
maybe some day, the kinks will work out ...

How to view the sql query?

hi,
how to view the sql query formed from the xml structure in the receiver jdbc?

You can view SAP Note at
http://service.sap.com/notes
But you require SMP login ID for this which you should get from your company. The content of the notes are as follows:
Reason and Prerequisites
You are looking for additional parameter settings. There are two possible reasons why a feature is available via the "additional parameters" table in the "advanced mode" section of the configuration, but not as documented parameter in the configuration UI itself:
Category 1: The parameter has been introduced for a patch or a SP upgrade where no UI upgrade and/or documentation upgrade was possible. In this case, the parameter will be moved to the UI and the documentation as soon as possible. The parameter in the "additional parameters" table will be deprecated after this move, but still be working. The parameter belongs to the supported adapter functionality and can be used in all, also productive, scenarios.
Category 2. The parameter has been introduced for testing purposes, proof-of-concept scenarios, as workaround or as pre-released functionality. In this case, the parameter may or may not be moved to the UI and documentation, and the functionality may be changed, replaced or removed. For this parameter category there is no guaranteed support and usage in productive scenarios is not supported.
When you want to use a parameter documented here, please be aware to which category it belongs!
Solution
The following list shows all available parameters of category 1 or 2. Please note:
Parameter names are always case-sensitive! Parameter values may be case-sensitive, this is documented for each parameter.
Parameter names and values as documented below must be used always without quotaton marks ("), if not explicitly stated otherwise.
The default value of a parameter is always chosen that it does not change the standard functionality
JDBC Receiver Adapter Parameters
1. Parameter name: "logSQLStatement"
              Parameter type: boolean
              Parameter value: true for any string value, false only for empty string
              Parameter value default: false (empty String)
              Available with: SP9
              Category: 2
              Description:
              When implementing a scenario with the JDBC receiver adapter, it may be helpful to see which SQL statement is generated by the JDBC adapter from the XI message content for error analysis. Before SP9, this can only be found in the trace of the JDBC adapter if trace level DEBUG is activated. With SP9, the generated SQL statement will be shown in the details page (audit protocol) of the message monitor for each message directly.
              This should be used only during the test phase and not in productive scenarios.
Regards,
Prateek

Hi everyone! newbie here! can someone tell me how to view my flash drive on an imac please?, hi everyone! newbie here! can someone tell me how to view my flash drive on an imac please?

Hello, can someone help me by telling me how to view my flash drive on an imac? I have it on a port but cant find it even using finder. Thanks!

If you think repeat yourself three times makes your problem clearer?
It does not.
Details are needed.
Allan

How to view only specific authentication requests in access tracker

Requirement:
How to view only "Healthy/Unhealthy" requests from a specific Webauth service.
Solution:
If we have more than one Webauth service (based on conditions such as Device type or NAS IP or posture status etc) and we need only Healthy/Unhealthy requests from a specific service in access tracker for administrative use; we need to create a custom Data filter.
Configuration:
Below are the steps to achieve the same:
Navigate to Monitoring > Data filters > Click on "Add" option to create a new filter
Specify a name on the "Filter" tab
Select the "Rule" tab to specify the unique condition (to filter the access tracker request)
Create the below conditions:
( Commonystem-Posture-Token CONTAINS Healthy )
- AND - ( Commonervice CONTAINS Windows-health-check )
5. Save this filter
Now we can use this Data filter in access tracker to only view Healthy Webauth requests from "Windows-health-check" service.
Verification
So now we can verify the output by looking at the access tracker.
At present we can see "Eight" webauth requests in access tracker. Now we want to see only Healthy web-auth request from "Windows-health-check" service.
We change the data filter to the Custom "healthy-filter" and now only see one request in access tracker as per our requirement.

Hi Vignesh,
ANy luck on this ? I am trying the almost same thing...and stuck at same point.
Please let us know if you have any more information.

How to view process of outbound Adaptor

Hi,
I am doing file to idoc scenario. I want to see the
status of message through "Outbound Adaptor" Monitoring.
In this Monitoring 3 tabs are. There thy were...
"Message Content",
"Queue Monitor"
"Outbound Adaptor"
when I am logging into this it is not taking my User
id. Then I tried with service user ids..even it is not
taking. why it is not taking and how to view all this
information?
Thx,
Ansar.

Hi Ansar,
Do you have the full logging and trace level in SXMB_ADM enabled.
In system the tracing is not enabled since it will occupy more memory . But you can turn it on and off in SXMB_ADM under the intergration engine configuration and press the help button to get all the parameters you can set.
This might help you
View Old Outbound docu in AE
Regards
Agasthuri Doss

How to view image in sagittal, coronal and axial view in labview

Hi guys
Can anyboday help in visualization of images in sagittal, coronal and axial view . For example I have slices of image I want to look into all three plane, how to write code for this.
I will Appreciate your help
Thanks
Solved!
Go to Solution.

Thank you for your reply guys
Here I am attaching three axial slices please let me know how we can change index and visualize in sagittal and coronal plane.
I really apprecite your help
Attachments:
slie1.jpg ‏31 KB
slice2.jpg ‏36 KB
slice3.jpg ‏44 KB

Three monitor setup

I have an Envy 700 339 desktop running windows 8 I want to set up three monitors ...PC existing card has 1-dvi, 1-hdmi...monitors are samsung 27" hdmi and have dvi/hdmi in/out
Do I need another card for optimum setup or am I missing something?
I purchased an hdmi splitter which works great for duplication but not for extended desktop.... I am not a gamer so I am not looking for fully extended, but simply two more monitors for moving windows around and other applications etc... My apologies if this is a rudimentary question I'm no techie for sure

Brian, welcome to the forum.
Here is what you need to do what you want to do:
http://www.startech.com/AV/USB-Video-Adapters/USB-3-to-HDMI-DVI-External-Video-Card-Multi-Monitor-Ad...
Please click the "Thumbs up + button" if I have helped you and click "Accept as Solution" if your problem is solved.
Signature:
HP TouchPad - 1.2 GHz; 1 GB memory; 32 GB storage; WebOS/CyanogenMod 11(Kit Kat)
HP 10 Plus; Android-Kit Kat; 1.0 GHz Allwinner A31 ARM Cortex A7 Quad Core Processor ; 2GB RAM Memory Long: 2 GB DDR3L SDRAM (1600MHz); 16GB disable eMMC 16GB v4.51
HP Omen; i7-4710QH; 8 GB memory; 256 GB San Disk SSD; Win 8.1
HP Photosmart 7520 AIO
++++++++++++++++++
**Click the Thumbs Up+ to say 'Thanks' and the 'Accept as Solution' if I have solved your problem.**
Intelligence is God given; Wisdom is the sum of our mistakes!
I am not an HP employee.

Three monitor setup, Only use one of them?

Hi!
Before i buy a third monitor I want to make sure everything work as expected. I need to be able to switch between the monitors so sometimes I want all of them to be active, sometimes only two or one of them. How do i switch between those modes?
I have two now and its easy in Windows + P where i can choose "PC Screen only" and "Second Screen Only" or extend. How does it looks with three monitors? What i want to switch between First & Second and Second & Third ?
Thanks for the help!

I shall suggest you to go through the following article:
Nice Multi-Monitor Enhancements in Windows 8.1
You may try DisplayLink
S.Sengupta, Windows Entertainment and Connected Home MVP

Three Monitor Save, Two Monitor Hang- CS6

I have three monitors running from my Dell M6600 at work. I save a Premiere Project with any panel open on the third monitor. Then take my computer home where I only have two monitors and open the project file, Premiere hangs. It will never launch the application fully. It opens to the point where it would normally load project data, and then hangs.
As a workarround I have begun making sure I save the project with all panels on two screens. However, if I forget then the only solution I have is to go to work to open the project. (Or get a third monitor at home...)
I would love to be able to edit the project XML and remove or reset the panel layout. Anyone else experiencing this issue? or know how to "hack/workaround" the project file?

Jim Simon wrote:
I don't think that's correct. Each project loads with the last saved window arrangement, named or not. So he'll need to rearrange the windows before saving at work (or get that third monitor at home).
I'm just going by the help file:
http://helpx.adobe.com/premiere-pro/using/workspaces.html
"If a project saved with a custom workspace is opened on another system, the application looks for a workspace with a matching name. If it can’t find a match (or the monitor configuration doesn’t match), it uses the current local workspace."
But like I said, I haven't tested it out myself.

Distribute video output over three monitors (+ another)

Hi there,
I've got a triple beamer setup + a Cinema Display. My Mac Pro has two ATI Radeon HD 2600 XT cards. What I need to do now is use the monitor as an operating monitor and combine/distribute the triple beamers in such a way that I can play one 1920 x 480 video file over all three monitors simultaneously, for an event.
The two ATI 2600 cards are especially in there to be able to do this, but when I try to combine the monitors through display settings or through the Quicktime settings, it just doesn't seem possible. VLC won't play my ProRes 422 material, but I could re-render off course when the video is done.
Is my only option a bloody €200,- video splitter, or can I do this 'the software way?'. I find it so hard to imagine that what I want wouldn't be possible with all the hardware power I've already got! Friendly greetings, Douwe.

If you click the "?" in the "Arrangement" tab of "Displays" system preference, it will tell you how to set three out of the four displays to mirror mode, leaving the fourth separate.

G5 Quad three monitors, how to view FCP?

Similar Messages

Maybe you are looking for