G5 Quad won't burn ANY DVD faster than 4x
I can't find a firmware update for the Pioneer DVR110D in my Mac. I never really paid much attention to how fast it was burning because it was only occasional use, but now I'm burning a lot of edited video, and it makes a big difference. I've tried Philips, Memorex, Sony, TDK, Ritek, Taiyo-Yuden and HP and can't get ANY of them to burn at the drive's rated speed. Some will only burn at 2x! Doesn't seem to matter if they're 4x, 8x or 16x. DL-DVDs only burn at 1x instead of 2.4. It's maddening.
If I'm making discs from images with Disk Utility all speed choices are grayed out, and I get what I get. Three consecutive discs off the stack may give me dupes at 1x, 2x and 4x.
There's a firmware update to 1.41 on Pioneer's site for the 110D, but it won't work on this drive. I've tried putting it in my PC, and it shows in Pioneer's drive identifier utility as a 110D, but the firmware update utility itself won't run because it says it can't find a compatible drive.
We had many problems with the Matsushita drives in our G5 iMacs not recognizing faster media, but a firmware upgrade at the Genius bar fixed those. Is there anything available for the Pioneer. The site only turns up two DVD firmware updates, neither of which applies to this drive.
Hi yakkyakk-
It is quite possible the drive is simply dirty. You could try a lens cleaning kit. It is also possible that the drive is failing.
For any serious burning an external is the way to go. I always consider the internal drive for occasional use. If you want to upgrade the internal drive yourself it is quite easy and you can buy an internal drive for around 40 bucks.
Luck-
-DaddyPaycheck
Similar Messages
-
Now my superdrive won't burn any DVDs. Can someone help please?
Hi.
I mentioned earlier in the 'won't burn dvd' topic that my Superdrive wouldn't burn DVD-Rs, saying there was a fault in the burning and the multiplexing.
Now it's spitting out my DVD+Rs as well. As a film student at a college that likes DVD submissions, this is terribly inconvenient. The computer gets as far as encoding everything, then spits out the disc as the burning begins.
I have tried completely re-loading my system, but still have a problem. Is anyone else having this problem and can they help me. Time is of the essence!
Many thanks.
PS. Check my post on 'won't burn dvds' for more info!Ok. As an addendum, I reset the PRAM and PMU. I also repaired disk permissions. I can burn DVD+R again at 2.4x speed. When burning, DVD-R, however, it spits out the disk and states (when I try to burn on its stated maximum speed of 2x): 'Unable to burn to "disk3" - The device failed to calibrate the laser power for this media..'
I'm not sure what that implies beyond the obvious: is there some sort of power control issue I need to deal with on the system? -
I can't burn any DVD or CD - burning process interrupts before it ends
Hi everybody !
Sorry for my bad english, but I assume you're all aware about the frenches are not very good at english.
I've got the following problem: I can't burn any dvd or cd. I've already tried with different programs such as Sonic, Nero 7.0, and I Tunes, and I got every time a mistake wich interrupted the burning process before it ends.
So I don't know what to day ! I've already tried to re install the drivers, but it's didtn't change anything.
In order to help you, I've saved an error log from nero. I hope it could be helpfull to someone who could help me !
Here is the log:
moi
5C82001080000000000666822849
Windows XP 5.1
IA32
WinAspi: -
ahead WinASPI: File 'C:\Program Files\Nero\Nero 7\Core\Wnaspi32.dll': Ver=2.0.1.74, size=164112 bytes, created 02/11/2004 13:54:32
NT-SPTI used
Nero Version: 7.0.0.0
Recorder: <MAT****A DVD-RAM UJ-841S>Version: 1.60 - HA 1 TA 0 - 7.0.0.0
Adapter driver: <IDE> HA 1
Drive buffer : 2048kB
Bus Type : default (0) -> ATAPI, detected: ?
CD-ROM: <MAT****A DVD-RAM UJ-841S >Version: 1.60 - HA 1 TA 0 - 7.0.0.0
Adapter driver: <IDE> HA 1
=== Scsi-Device-Map ===
DiskPeripheral : FUJITSU MHV2100BH PL atapi Port 0 ID 0 DMA: On
CdRomPeripheral : MAT****A DVD-RAM UJ-841S atapi Port 1 ID 0 DMA: On
CdRomPeripheral : AXV CD/DVD-ROM 2.1b axvodka Port 2 ID 0 DMA: Off
=== CDRom-Device-Map ===
MAT****A DVD-RAM UJ-841S D: CDRom0
AXV CD/DVD-ROM F: CDRom1
=======================
AutoRun : 1
Excluded drive IDs:
WriteBufferSize: 83886080 (0) Byte
ShowDrvBufStat : 0
BUFE : 0
Physical memory : 2045MB (2095084kB)
Free physical memory: 1277MB (1308144kB)
Memory in use : 37 %
Uncached PFiles: 0x0
Use Inquiry : 1
Global Bus Type: default (0)
Check supported media : Disabled (0)
21.9.2006
CD-ROM (ISO)
21:04:46 #1 Text 0 File Isodoc.cpp, Line 6410
Iso document burn settings
Determine maximum speed : FALSE
Simulate : TRUE
Write : TRUE
Finalize CD : FALSE
Multisession : TRUE
Multisession type: : Start multisession
Burning mode : TAO
Mode : 1
ISO Level : 1 (Max. of 11 = 8 + 3 char)
Character set : ISO 9660
Joliet : TRUE
Allow pathdepth more than 8 directories : TRUE
Allow more than 255 characters in path : TRUE
Write ISO9660 ;1 file extensions : TRUE
21:04:47 #2 Text 0 File Burncd.cpp, Line 3007
MAT****A DVD-RAM UJ-841S
SmoothLink activs
21:04:47 #3 Text 0 File ThreadedTransfer.cpp, Line 525
ReadBuffer-Pipe got 81920KB of Memory
21:04:47 #4 Text 0 File Reader.cpp, Line 124
Reader running
21:04:47 #5 Text 0 File Writer.cpp, Line 113
Writer D: MAT****A DVD-RAM UJ-841S running
21:04:47 #6 ISO9660GEN -11 File Geniso.cpp, Line 3304
First writeable address = 0 (0x00000000)
21:04:47 #7 Text 0 File Burncd.cpp, Line 3301
Turn on Track-At-Once, using CD-R/RW media
21:04:48 #8 Text 0 File DlgWaitCD.cpp, Line 277
Last possible write address on media: 359844 ( 79:59.69)
Last address to be written: 318786 ( 70:52.36)
21:04:48 #9 Text 0 File DlgWaitCD.cpp, Line 289
Write in overburning mode: NO (enabled: CD)
21:04:48 #10 Text 0 File DlgWaitCD.cpp, Line 2568
Recorder: MAT****A DVD-RAM UJ-841S
21:04:48 #11 Text 0 File DlgWaitCD.cpp, Line 456
>>> Protocol of DlgWaitCD activities: <<<
=========================================
21:04:48 #12 Text 0 File ThreadedTransferInterface.cpp, Line 846
Setup items (after recorder preparation)
0: TRM_DATA_MODE1 ()
2 indices, index0 (150) not provided
original disc pos #0 + 318787 (318787) = #318787/70:50.37
relocatable, disc pos for caching/writing not required/ required, no patch infos
-> TRM_DATA_MODE1, 2048, config 0, wanted index0 0 blocks, length 318785 blocks [D: MAT****A DVD-RAM UJ-841S]
21:04:48 #13 Text 0 File ThreadedTransferInterface.cpp, Line 1058
Prepare recorder [D: MAT****A DVD-RAM UJ-841S] for write in TAO
DAO infos:
==========
MCN: ""
TOCType: 0x00; Session Closed, disc not fixated
Tracks 1 to 1:
1: TRM_DATA_MODE1, 2048/0x00, FilePos 0 307200 653182976, ISRC ""
DAO layout:
===========
__Start_|____Track_|_Idx_|_CtrlAdr_|_RecDep_______ ___
-150 | lead-in | 0 | 0x41 | 0x00
-150 | 1 | 0 | 0x41 | 0x00
0 | 1 | 1 | 0x41 | 0x00
318787 | lead-out | 1 | 0x41 | 0x00
21:04:48 #14 Text 0 File ThreadedTransferInterface.cpp, Line 1126
Removed 2 run-out blocks from end of track 1. Length: 318787 -> 318785.
21:04:48 #15 Text 0 File SCSIPassThrough.cpp, Line 34
SPTILockVolume - completed successfully for FCTL_LOCK_VOLUME
21:04:48 #16 Phase 24 File dlgbrnst.cpp, Line 1724
Caching of files started
21:04:49 #17 Text 0 File Burncd.cpp, Line 4129
Cache writing successful.
21:04:49 #18 Phase 25 File dlgbrnst.cpp, Line 1724
Caching of files completed
21:04:49 #19 Phase 32 File dlgbrnst.cpp, Line 1724
Simulation started at 24x (3 600 Ko/s)
21:04:49 #20 Text 0 File ThreadedTransferInterface.cpp, Line 2669
Verifying disc position of item 0 (relocatable, disc pos, no patch infos, orig at #0): write at #0
21:04:49 #21 Text 0 File MMC.cpp, Line 21541
Set BUFE: SmoothLink -> ON
21:10:08 #22 Text 0 File ThreadedTransfer.cpp, Line 228
all writers idle, stopping conversion
21:10:10 #23 Phase 33 File dlgbrnst.cpp, Line 1724
Simulation completed successfully at 24x (3 600 Ko/s)
21:10:11 #24 Phase 36 File dlgbrnst.cpp, Line 1724
Burn process started at 24x (3 600 Ko/s)
21:10:11 #25 Text 0 File ThreadedTransferInterface.cpp, Line 2669
Verifying disc position of item 0 (relocatable, disc pos, no patch infos, orig at #0): write at #0
21:10:11 #26 Text 0 File MMC.cpp, Line 21541
Set BUFE: SmoothLink -> ON
21:12:16 #27 SPTI -1040 File SCSIPassThrough.cpp, Line 306
CdRom0: SCSIStatus(x02) WinError(0) NeroError(-1040)
Sense Key: 0x03 (KEY_MEDIUM_ERROR)
Sense Code: 0x10
Sense Qual: 0x00
CDB Data: 0x2A 00 00 01 76 C0 00 00 20 00 00 00
Sense Area: 0xF1 00 03 00 01 74 5D 0A 00 13 00 00 10
Buffer x03390000: Len x10000
0x72 F1 87 E5 D3 3D 4A 96 F9 B0 73 83 D3 14 72 A1
0xF3 49 6E 93 44 25 04 6D E5 CE 44 5F 3E C6 79 47
0xDD DD EA 3A FD 71 4D 32 CB 35 F3 DF 4B 18 BD 7D
21:12:16 #28 CDR -1040 File Writer.cpp, Line 302
Illegal block size for command
D: MAT****A DVD-RAM UJ-841S
21:12:16 #29 Text 0 File ThreadedTransfer.cpp, Line 228
all writers idle, stopping conversion
21:12:17 #30 Text 0 File ThreadedTransfer.cpp, Line 222
conversion idle, stopping reader
21:12:17 #31 CDR -201 File WriterStatus.cpp, Line 200
Invalid write state
D: MAT****A DVD-RAM UJ-841S
21:12:17 #32 TRANSFER -18 File WriterStatus.cpp, Line 200
Could not perform EndTrack
21:12:17 #33 Text 0 File MMC.cpp, Line 16273
<MAT****ADVD-RAM UJ-841S > start Close Session
21:12:30 #34 SPTI -1040 File SCSIPassThrough.cpp, Line 306
CdRom0: SCSIStatus(x02) WinError(0) NeroError(-1040)
Sense Key: 0x03 (KEY_MEDIUM_ERROR)
Sense Code: 0x10
Sense Qual: 0x00
CDB Data: 0x00 00 00 00 00 00 00 00 00 00 00 00
Sense Area: 0x71 00 03 00 00 00 00 0A 00 13 00 00 10
21:12:30 #35 CDR -1040 File WriterStatus.cpp, Line 249
Illegal block size for command
D: MAT****A DVD-RAM UJ-841S
21:12:30 #36 TRANSFER -19 File WriterStatus.cpp, Line 249
Could not perform Fixation
21:12:30 #37 Text 0 File WriterStatus.cpp, Line 258
falling back to disc fixation
21:12:30 #38 Text 0 File MMC.cpp, Line 16273
<MAT****ADVD-RAM UJ-841S > start Close Session
21:12:30 #39 SPTI -1046 File SCSIPassThrough.cpp, Line 306
CdRom0: SCSIStatus(x02) WinError(0) NeroError(-1046)
Sense Key: 0x05 (KEY_ILLEGAL_REQUEST)
Sense Code: 0x30
Sense Qual: 0x05
CDB Data: 0x5B 01 02 00 00 00 00 00 00 00 00 00
Sense Area: 0x70 00 05 00 00 00 00 0A 00 AA 00 00 30 05
21:12:30 #40 CDR -1046 File WriterStatus.cpp, Line 249
Illegal disc
D: MAT****A DVD-RAM UJ-841S
21:12:30 #41 TRANSFER -19 File WriterStatus.cpp, Line 249
Could not perform Fixation
21:12:30 #42 Phase 38 File dlgbrnst.cpp, Line 1724
Burn process failed at 24x (3 600 Ko/s)
Existing drivers:
File 'Drivers\PXHELP20.SYS': Ver=2.03.32a, size=20640 bytes, created 25/04/2005 11:03:00 (Prassi/Veritas driver for win 2K)
Registry Keys:
HKLM\Software\Microsoft\Windows NT\CurrentVersion\WinLogon\AllocateCDROMs : 0 (Security Option)
So, thanks to you !
See you !
RomainHi
The error log doesnt provide any very useful information.
According to this error log the simulation was running correct but the burning process was not started.
In such case its very hard to say why it happens. Possibly the drive is damage and cannot calibrate the lens properly or you use not compatible medias.
The burning process depands also on the fiels and data which youwant to burn.
Some data, CD, DVDs are encrypted and its not possible to burn and to copy it.
In other case you could also try to burn the medias with lower speed and not with 24x.
But in worth case you the drive has a malfunction and you have to replace it ;( -
I updated to Mavericks and now I can'burn any DVD's any more. I get the following error message and the disk is ejected: The disc can’t be burned because an unexpected error occurred (error code 0x80020000)
I did burn the same way in MAC OS X 10.6.8. with no troubles!
Can anyone please help me out?
I use for years DVD-R of TDK 4.7GB 16X.Hey topo27,
I would try out the following and see if it helps:
Intel-based Macs: Resetting the System Management Controller (SMC)
http://support.apple.com/kb/HT3964
Welcome to Apple Support Communities!
Cheers,
Delgadoh -
Can't burn any DVD on my macbook pro
I can't burn any DVD on my macbook pro, also some of previusly burned DVD are not recognized now & cant be mounted. I tryed choosing different software Burn, KKitchen, Titanium Toast 11, LiquidCD, NTIDragonBurn_v4_OSX, ExpressBurn_i (also burn from Finder) and different brands of DVD -- same diagnostics -- Medium error. One brand (TDK DVD+R) is unstable burn one or two disc tnan begin spoil DVD discs. Have you any solutions?
Model Name: MacBook Pro
Model Identifier: MacBookPro8,2
Processor Name: Intel Core i7
Processor Speed: 2,2 GHz
Number of Processors: 1
Total Number of Cores: 4
L2 Cache (per Core): 256 KB
L3 Cache: 6 MB
Memory: 4 GB
Boot ROM Version: MBP81.0047.B27
SMC Version (system): 1.69f3
OPTIARC DVD RW AD-5970H:
Firmware Revision: 3APE
Interconnect: ATAPI
Burn Support: Yes (Apple Shipping Drive)
Cache: 2048 KB
Reads DVD: Yes
CD-Write: -R, -RW
DVD-Write: -R, -R DL, -RW, +R, +R DL, +RW
Write Strategies: CD-TAO, CD-SAO, CD-Raw, DVD-DAO
Media: To show the available burn speeds, insert a disc and choose View > RefreshHave you read this post? may help you
https://discussions.apple.com/message/18149044#18149044 -
error code 0X8002006E my optical mounts certain disks but won't burn any can someone explain 271nch imac running 10.8.4 ML
Hi!
Did You See If this Happens In Safe Mode?
On Startup After the Chime Hold Down Shift Then Release It When you see the Apple and the Progress Indicator(Spinning gear). This Boot Will take a Little Longer Than Normal.
If it Did Not Work Than There Might Be Something Wrong With The Disc Drive.
I HOPE THIS HELP:) -
Error message - won't let me burn any dvd's
Hello
Tried a couple of times to burn this DVD project using DVD SP 4.1 and the first DVD went well, tried a second one got this error message...tried a different dvd got the same message:
Formatting failed
The recording device reported the media error: Power calibration area error. (0x73, 0x03.)
Never saw this before - fix?
Thanks
KBAlso get this in the build log - don't know if this is a problem or not...
Warning: The directory ‘/Volumes/All Media/DVDSP4_projects/Wedding 2004’ will not be included in the final disc.
Warning: The directory ‘/Volumes/All Media/DVDSP4projects/JACKETP/PAR’ will not be included in the final disc.
Warning: The file ‘VOB_DATA.LAY’ found in the VIDEO_TS or HVDVD_TS folder will not be included in the final disc.
Warning: The file ‘WEDDING_04.layout’ found in the VIDEO_TS or HVDVD_TS folder will not be included in the final disc.
Thanks
KB -
Drive won't read any dvd ejects it automatically
My drive Won't read any kind of DVDs, it keeps ejecting automatically after spinning for a while. it's been going on for a while now. please help!!!!!
You can try resetting the SMC Intel-based Macs: Resetting the System Management Controller (SMC) - Apple Support
and PRAM How to Reset NVRAM on your Mac - Apple Support
If that doesn't help you can try a cleaning disc or a quick shot of canned air. It's likely though that your drive has failed, it' not all that uncommon. It that is the case you can either replace it or have it replaced but it's far cheaper just to buy a usb external drive....just not Apples because it won't work with macs with a built in drive working or not. . -
Iphoto library won't burn to DVD
I'm having problems burning my library to DVD. I'm using a iomega external DVD+/- burner. When I select the pictures i want to burn from the iphoto window, i get this error..."NO DEVICES ARE AVAILABLE FOR BURNING". I tried burning a DVD with another application and it worked fine so I'm assuming it's between iphoto and the burner. I have the latest patch burn installed as well. Any help would be greatly appreciated as this is the only way I can get my library on DVD with all the photo information and film rolls intact.
Thanks.Share ==> burn creates a mini iPhoto library only usable by iPhoto and includes multiple versions of each Photo so the disk requirements several times the sie of just the selected photos
the answer is to select all the photos in the album, export them (fil menu ==> export - see the user tip on exporting for details of the export options) to a desktop folder and use the finder to burn that folder to disk
LN -
Last 10 seconds of video won't burn to DVD
here is the process I'm using to burn my DVD... I'm using Mpeg-2 video and AC3 audio, and creating a disk image (.img) using DVDSP4. Then I'm burning using Disk Utility at 2x speed, because burning straight from DVDSP4 was giving me problems.
The problem is that the DVD will not go beyond 12 minutes and 22 seconds.
Originally, my video was that length, but then I realized that it didn't fade out at the end, so I went into Final Cut, added the fade, and then re-compressed the video and audio, made a new disk image, but for some reason the dvds I'm burning are still the same, it ends at 12min 22sec, with no fade. I'm sure that the mpeg is the complete video, because I watched it in quicktime, and when I simluate the disk in DVDSP4 it plays the complete video, but then when I burn it, the end is not there. any ideas why this would be happening?When you go to 'Build & Format' in the dialogue box the second section is about the 'Source'. If you have already built this project once then DVDSP will fill in the details within that section for you, assuming that you want to re-use the same build, which saves time. However, you should specify a new folder there and let DVDSP re-create this from scratch if you are having problems.
-
HP dv6263cl DVD Rom unable to burn any dvd
dear hp/support team mates:
i have purchased HP 6000 series notebook in Oct -07 and i m satisfied with its performance. intially i didn't have any data to burn on the dvd rom. but with passage of time i have data which requires backup on dvd rom. now the problem i m facing is i m unable to write/burn any data on blank dvd's which are available in open market.
i have changed different brands of dvd rw and used multi softwares to burn the dvd. everytime i get the error its dvd fault which is unable to have write on it. now i m not technical person but if proper guidence is transfered then i m able to diagnose the issue.
the error i get is .. The disc in the drive is not writable disc or it is full. Please insert a writable disc in drive.
now waiting for the response from your end.Can you play a movie dvd? In other words is the dvd drive otherwise operational? If you have never reloaded the operating system after 2.5 years that would be the place to start. After all that time it is very possible the registry or other part of software is corrupted. You also say you have installed multiple disk burning software installations. That can pose a problem. I would ask you to recover it to factory state or better yet install a new clean copy of Windows 7 so we can properly isolate potential hardware issues from software issues.
We are not official HP people by the way just users who volunteer to help.
I am assuming you have Vista but if that is wrong let us know. -
Can anyone help me with a camcorder problem? I have just bought a canon 25i camcorder, mainly because it is compatible with mac and supposedly with iMovie/iDVD.
I am able to import DV tapes into iMovie, and get them into iDVD, but when I ask it to burn to disc it won't comply.
I am able to get roxio toast titanium to work, but this takes literally hours to 'encode' prior to burning.
My mac is a G4 iMac 1Ghz with 768mb ram. I am running the latest version of Panther.
Has anyone had similar problems and solved them, am I missing something simple?
Thanks,
John.Duane,Well you are right iDVD 5 will burn to DVD-RW in accordance with this article; I just tried it on my TiBook. Reading the article you quote it says MacOS X supports DVD-R and that third party software is required for DVD-RW (although it does not state this explictly). I am 90% sure that before I upgraded from iDVD 3 that DVD-RW would not burn from iDVD directly I also recall it did not state a specific error but only continued to ask for a blank disc. I can remember this being a pain when I first flashed my Superdrives firmware as RW are great for trialing a disk before wasting DVD-Rs. Can anyone confirm?
-
DVD Studio Pro 4.0.2 won't burn my DVDs that I have always used
I am trying to burn a DVD in DVDSP 4.0.2 and it comes up with errors around the media being mismatched or incorrect, etc... It is the same media I have always used with great success (I bought a lot of blank media). It seems as though ever since I updated my OS to Leopard I have had issues with this same media... coming up with these errors. Would a newer OS make the media suddenly not work in the same DVD drive? Not sure what else it could be...
Any thoughts?
Thanks for your help in advanceIt may be worth getting the lend of an external drive to eliminate your hardware .. can you write DVD's data with any other software such as Toast or even using the OS to backup data to a DVD drive. How old are the blanks ..I once had a faulty batch of 100 a while back and it turned out they had been in the store for two years ..With that in mind try a new one not out of that batch .. All of this may be of no help but it is typical of the things I would try to attempt to narrow the field of suspects down a bit.
Jim
jimkells.com -
ITunes 7.1 Won't Burn Any CD's
I can't burn any CD's audio or mp3's everytime I do it asks "Please Insert A Blank Disc" it then checks then does nothing.
Looks like iTunes stuffed up big time it's bloody useless to me the way it's running I can't even add new music either as in they don't show up in the list'si forgot to mention that this does not happen with albums PURCHASED from the itunes store, but it does happen with any other album (including those available in the itunes store).
Message was edited by: iamsoupcombust -
IDVD 5 won't burn any of my projects that are over an hour
I'm okay if I can background encode a project--it seems to burn fine.
Since I can't background encode a project that's over an hour, these will not burn properly...
any ideas?Hi Patricia
One more thing.
iDVD and iMovie work is very dependant on that there is lot's of free space
on Your internal hard disk.
less than 10Gb - You get most probably problems or no DVD burning at all.
I use to recommend 25Gb free - this is more than needed but it will work
so much better/faster.
Why ?
iDVD needs space to calculate and store the DVD in construction
Mac OS is in reallity UNIX and UNIX uses lots of temp-files AND virtual
memory managments = Lot's of time consumed to handle this and the
result is extreme DVD burnings times - if it results in anything at all
(often happening and confusing)
Yours Bengt W
Maybe you are looking for
-
I am trying to create a bar of pie chart in Excel 2003. I am able to insert my data and create the chart, but I need to set the "SplitValue" to 6. I was able to find the property for doing this but I get an error when I run the vi (see attached). An
-
Creative Cloud App open and close / crash immediately.
Creative Cloud App open and close immediately on mac book pro. There is no error message. I just see cloud icon on top bar for few second and the it disappear and nothing happened. What I done: reset and reinstal the CC App few times uninstall CC Ap
-
Windows 8.1 Update - SECURITY THREAT
Last week's update trashed my internet explorer. After two hours of trying to fix it, I installed Google Chrome. I can now work on the web again and it only cost me two hours. This week's update changed my computer login, now requiring me to log in
-
Sales order blocked for credit with status "Payment Terms"
Hi Experts, Sales order is blocked for credit, as when i refer the t.code vkm3 or vkm1, the status of blocking showing as "Payment Term". Geenrally the status of credit block would be 'Old item', Dynamic check', value etc. My question here is how the
-
what do i do, i can't even get the windows disk out, all it dos is go into windows boot manger and windows error recovery, and all it wants keep going installing what do i do? is it a new harddisk? i have 1 more imac at home atm to get help from. god