G5 Server Failed howto bring users over to new intel server?
Hi,
I have(had) a G5 acting as Open directory master managing ~200 users with networked home directory. The G5 died today, seems to be a power supply issue, and I want to get our new intel server to get these users up and running. The hard drive is fine from th G5, so I can pull that data no problem, I was just wondering what the easiest way to pull out the user data from that machine and get it into the Intel server. Do I need to get those drives in another PPC machine and export it out that way? Any help you guys could give would be greatly appreciated.
Thanks!
I also have this problem and I haven't had the time to find out what's wrong (not using homefolders yet).
I don't even see the LDAP server in Directory Access.
The server is setup from scratch (no user accounts imported).
What about passwords?
They probably isn't preserved when exporting importing accounts.
I have followed an AFP548 article about how to achieve that.
It has "saved me" several times when having LDAP problems:
Migrating LDAP Users and Passwords to a Clean 10.4 Server
http://www.afp548.com/article.php?story=20050615173039158
Similar Messages
-
Failed to find user: connect to new vcenter nexus 1000v
I upgraded my vsm from 4.2(1)SV2(1.1a) to
5.2(1)SV3(1.1)
but when I changed my vcenter and connect
I got the error
cannot find USer.
but the dvs got created fine in the new vcenter
any idea?What is the path and start page that you have specified on
the first page of the FlashHelp layout dialog?
--Ben -
Win Server 2012 Failover Cluster - Error: Failed to bring cluster disk online
Hi Technet
I'm currently running running 2 VMs Win Server 2012 and would like to test Failover Clustering for one of our FTP server
I've added on both servers an additional partition, formatted and Online
One of the drives comes Online but cannot bring the 2nd disk online from the cluster manager
Error: failed to bring resource online - clustered storage is not connected to the node
Assistance would be greatly appreciated
Thank you
JabuHi jsibeko,
Since the VMware offer the MSCS shared storage solution themselves, I suggest you first ask VMware whether that shared storage is supported with your vSphere edition, I found
some VMware KB about the VMware shared storage for MSCS, may you can get more tips.
The VMware KB:
Microsoft Clustering on VMware vSphere: Guidelines for supported configurations (1037959)
http://kb.vmware.com/selfservice/microsites/search.do?language=en_US&cmd=displayKC&externalId=1037959
Microsoft Cluster Service (MSCS) support on ESXi/ESX (1004617)
http://kb.vmware.com/selfservice/microsites/search.do?language=en_US&cmd=displayKC&externalId=1004617
I’m glad to be of help to you!
Please remember to mark the replies as answers if they help and unmark them if they provide no help. If you have feedback for TechNet Support, contact [email protected] -
Root.sh fails to bring up crs
Hi All,
I am installing 11gR2 on IBM AIX.
Every ran fine. when i ran root.sh
CRS-2676: Start of 'ora.diskmon' on 't24db1' succeeded
CRS-2676: Start of 'ora.cssd' on 't24db1' succeeded
CRS-2672: Attempting to start 'ora.ctssd' on 't24db1'
CRS-2676: Start of 'ora.ctssd' on 't24db1' succeeded
ASM created and started successfully.
DiskGroup OCR_VOTE created successfully.
clscfg: -install mode specified
Successfully accumulated necessary OCR keys.
Creating OCR keys for user 'root', privgrp 'system'..
Operation successful.
CRS-2672: Attempting to start 'ora.crsd' on 't24db1'
CRS-2676: Start of 'ora.crsd' on 't24db1' succeeded
CRS-4256: Updating the profile
Successful addition of voting disk 70e7b3c678074f2bbfcf933764645975.
Successful addition of voting disk a85fe5cb0c9a4f88bf5adf830732d62f.
Successful addition of voting disk 52d343aad6374f79bf0257908be9a6c9.
Successfully replaced voting disk group with +OCR_VOTE.
CRS-4256: Updating the profile
CRS-4266: Voting file(s) successfully replaced
## STATE File Universal Id File Name Disk group
1. ONLINE 70e7b3c678074f2bbfcf933764645975 (/dev/rhdisk10) [OCR_VOTE]
2. ONLINE a85fe5cb0c9a4f88bf5adf830732d62f (/dev/rhdisk11) [OCR_VOTE]
3. ONLINE 52d343aad6374f79bf0257908be9a6c9 (/dev/rhdisk5) [OCR_VOTE]
Located 3 voting disk(s).
CRS-2673: Attempting to stop 'ora.crsd' on 't24db1'
CRS-2677: Stop of 'ora.crsd' on 't24db1' succeeded
CRS-2673: Attempting to stop 'ora.asm' on 't24db1'
CRS-2677: Stop of 'ora.asm' on 't24db1' succeeded
CRS-2673: Attempting to stop 'ora.ctssd' on 't24db1'
CRS-2677: Stop of 'ora.ctssd' on 't24db1' succeeded
CRS-2673: Attempting to stop 'ora.cssdmonitor' on 't24db1'
CRS-2677: Stop of 'ora.cssdmonitor' on 't24db1' succeeded
CRS-2673: Attempting to stop 'ora.cssd' on 't24db1'
CRS-2677: Stop of 'ora.cssd' on 't24db1' succeeded
CRS-2673: Attempting to stop 'ora.gpnpd' on 't24db1'
CRS-2677: Stop of 'ora.gpnpd' on 't24db1' succeeded
CRS-2673: Attempting to stop 'ora.gipcd' on 't24db1'
CRS-2677: Stop of 'ora.gipcd' on 't24db1' succeeded
CRS-2673: Attempting to stop 'ora.mdnsd' on 't24db1'
CRS-2677: Stop of 'ora.mdnsd' on 't24db1' succeeded
CRS-2672: Attempting to start 'ora.mdnsd' on 't24db1'
CRS-2676: Start of 'ora.mdnsd' on 't24db1' succeeded
CRS-2672: Attempting to start 'ora.gipcd' on 't24db1'
CRS-2676: Start of 'ora.gipcd' on 't24db1' succeeded
CRS-2672: Attempting to start 'ora.gpnpd' on 't24db1'
CRS-2676: Start of 'ora.gpnpd' on 't24db1' succeeded
CRS-2672: Attempting to start 'ora.cssdmonitor' on 't24db1'
CRS-2676: Start of 'ora.cssdmonitor' on 't24db1' succeeded
CRS-2672: Attempting to start 'ora.cssd' on 't24db1'
CRS-2672: Attempting to start 'ora.diskmon' on 't24db1'
CRS-2676: Start of 'ora.diskmon' on 't24db1' succeeded
CRS-2676: Start of 'ora.cssd' on 't24db1' succeeded
CRS-2672: Attempting to start 'ora.ctssd' on 't24db1'
CRS-2676: Start of 'ora.ctssd' on 't24db1' succeeded
CRS-2672: Attempting to start 'ora.asm' on 't24db1'
CRS-2676: Start of 'ora.asm' on 't24db1' succeeded
CRS-2672: Attempting to start 'ora.crsd' on 't24db1'
CRS-2676: Start of 'ora.crsd' on 't24db1' succeeded
CRS-2672: Attempting to start 'ora.evmd' on 't24db1'
CRS-2676: Start of 'ora.evmd' on 't24db1' succeeded
Timed out waiting for the CRS stack to start.
I can also do the ocrcheck and i am also able to connect to ASM.
crs process is not coming up.
I tried to start it manually but no luck.
alert log
[crsd(11534476)]CRS-1012:The OCR service started on node t24db1.
2011-09-21 20:29:50.913
[crsd(11534476)]CRS-1201:CRSD started on node t24db1.
2011-09-21 20:29:52.130
[ohasd(6947036)]CRS-2765:Resource 'ora.crsd' has failed on server 't24db1'.
2011-09-21 20:29:53.760
[crsd(11468998)]CRS-1012:The OCR service started on node t24db1.
2011-09-21 20:29:54.029
[crsd(11468998)]CRS-1201:CRSD started on node t24db1.
2011-09-21 20:29:55.246
[ohasd(6947036)]CRS-2765:Resource 'ora.crsd' has failed on server 't24db1'.
2011-09-21 20:29:55.246
[ohasd(6947036)]CRS-2771:Maximum restart attempts reached for resource 'ora.crsd'; will not restart.
2011-09-21 20:51:59.589
[crsd(8650916)]CRS-1012:The OCR service started on node t24db1.
2011-09-21 20:51:59.854
[crsd(8650916)]CRS-1201:CRSD started on node t24db1.
2011-09-21 20:52:00.895
[ohasd(6947036)]CRS-2765:Resource 'ora.crsd' has failed on server 't24db1'.
2011-09-21 20:52:02.588
[crsd(9306182)]CRS-1012:The OCR service started on node t24db1.
2011-09-21 20:52:02.852
[crsd(9306182)]CRS-1201:CRSD started on node t24db1.
2011-09-21 20:52:04.024
[ohasd(6947036)]CRS-2765:Resource 'ora.crsd' has failed on server 't24db1'.
2011-09-21 20:52:05.693
[crsd(9306184)]CRS-1012:The OCR service started on node t24db1.
2011-09-21 20:52:05.961
[crsd(9306184)]CRS-1201:CRSD started on node t24db1.
2011-09-21 20:52:07.174
[ohasd(6947036)]CRS-2765:Resource 'ora.crsd' has failed on server 't24db1'.
2011-09-21 20:52:08.807
[crsd(11337884)]CRS-1012:The OCR service started on node t24db1.
2011-09-21 20:52:09.078
[crsd(11337884)]CRS-1201:CRSD started on node t24db1.
2011-09-21 20:52:10.289
[ohasd(6947036)]CRS-2765:Resource 'ora.crsd' has failed on server 't24db1'.
2011-09-21 20:52:11.942
[crsd(11206904)]CRS-1012:The OCR service started on node t24db1.
2011-09-21 20:52:12.207
[crsd(11206904)]CRS-1201:CRSD started on node t24db1.
2011-09-21 20:52:13.400
[ohasd(6947036)]CRS-2765:Resource 'ora.crsd' has failed on server 't24db1'.
2011-09-21 20:52:15.031
[crsd(11337894)]CRS-1012:The OCR service started on node t24db1.
2011-09-21 20:52:15.302
[crsd(11337894)]CRS-1201:CRSD started on node t24db1.
2011-09-21 20:52:16.521
[ohasd(6947036)]CRS-2765:Resource 'ora.crsd' has failed on server 't24db1'.
2011-09-21 20:52:18.132
[crsd(11337896)]CRS-1012:The OCR service started on node t24db1.
2011-09-21 20:52:18.403
[crsd(11337896)]CRS-1201:CRSD started on node t24db1.
2011-09-21 20:52:19.627
[ohasd(6947036)]CRS-2765:Resource 'ora.crsd' has failed on server 't24db1'.
2011-09-21 20:52:21.225
[crsd(9306200)]CRS-1012:The OCR service started on node t24db1.
2011-09-21 20:52:21.498
[crsd(9306200)]CRS-1201:CRSD started on node t24db1.
2011-09-21 20:52:22.717
[ohasd(6947036)]CRS-2765:Resource 'ora.crsd' has failed on server 't24db1'.
2011-09-21 20:52:25.895
[crsd(8650934)]CRS-1012:The OCR service started on node t24db1.
2011-09-21 20:52:26.176
[crsd(8650934)]CRS-1201:CRSD started on node t24db1.
2011-09-21 20:52:27.369
[ohasd(6947036)]CRS-2765:Resource 'ora.crsd' has failed on server 't24db1'.
2011-09-21 20:52:29.046
[crsd(9306206)]CRS-1012:The OCR service started on node t24db1.
2011-09-21 20:52:29.316
[crsd(9306206)]CRS-1201:CRSD started on node t24db1.
2011-09-21 20:52:30.511
[ohasd(6947036)]CRS-2765:Resource 'ora.crsd' has failed on server 't24db1'.
2011-09-21 20:52:32.169
[crsd(11337908)]CRS-1012:The OCR service started on node t24db1.
2011-09-21 20:52:32.435
[crsd(11337908)]CRS-1201:CRSD started on node t24db1.
2011-09-21 20:52:33.629
[ohasd(6947036)]CRS-2765:Resource 'ora.crsd' has failed on server 't24db1'.
2011-09-21 20:52:33.630
[ohasd(6947036)]CRS-2771:Maximum restart attempts reached for resource 'ora.crsd'; will not restart.
2011-09-21 20:57:11.777
[ctssd(8388722)]CRS-2405:The Cluster Time Synchronization Service on host t24db1 is shutdown by user
2011-09-21 20:58:15.374
[ctssd(8519782)]CRS-2403:The Cluster Time Synchronization Service on host t24db1 is in observer mode.
2011-09-21 20:58:15.391
[ctssd(8519782)]CRS-2407:The new Cluster Time Synchronization Service reference node is host t24db1.
2011-09-21 20:58:16.064
[ctssd(8519782)]CRS-2401:The Cluster Time Synchronization Service started on host t24db1.
2011-09-21 20:58:32.499
[crsd(11862176)]CRS-1012:The OCR service started on node t24db1.
2011-09-21 20:58:33.649
[crsd(11862176)]CRS-1201:CRSD started on node t24db1.
2011-09-21 20:58:34.450
[ohasd(6947036)]CRS-2765:Resource 'ora.crsd' has failed on server 't24db1'.
2011-09-21 20:58:36.075
[crsd(11534462)]CRS-1012:The OCR service started on node t24db1.
2011-09-21 20:58:36.339
[crsd(11534462)]CRS-1201:CRSD started on node t24db1.
2011-09-21 20:58:37.560
[ohasd(6947036)]CRS-2765:Resource 'ora.crsd' has failed on server 't24db1'.
2011-09-21 20:58:39.190
[crsd(9699394)]CRS-1012:The OCR service started on node t24db1.
2011-09-21 20:58:39.555
[crsd(9699394)]CRS-1201:CRSD started on node t24db1.
2011-09-21 20:58:40.677
[ohasd(6947036)]CRS-2765:Resource 'ora.crsd' has failed on server 't24db1'.
2011-09-21 20:58:42.311
[crsd(9699396)]CRS-1012:The OCR service started on node t24db1.
2011-09-21 20:58:42.586
[crsd(9699396)]CRS-1201:CRSD started on node t24db1.
2011-09-21 20:58:43.790
[ohasd(6947036)]CRS-2765:Resource 'ora.crsd' has failed on server 't24db1'.
2011-09-21 20:58:45.435
[crsd(11600058)]CRS-1012:The OCR service started on node t24db1.
2011-09-21 20:58:45.720
[crsd(11600058)]CRS-1201:CRSD started on node t24db1.
2011-09-21 20:58:46.909
[ohasd(6947036)]CRS-2765:Resource 'ora.crsd' has failed on server 't24db1'.
2011-09-21 20:58:48.536
[crsd(11600060)]CRS-1012:The OCR service started on node t24db1.
2011-09-21 20:58:48.799
[crsd(11600060)]CRS-1201:CRSD started on node t24db1.
2011-09-21 20:58:50.037
[ohasd(6947036)]CRS-2765:Resource 'ora.crsd' has failed on server 't24db1'.
2011-09-21 20:58:51.670
[crsd(9699410)]CRS-1012:The OCR service started on node t24db1.
2011-09-21 20:58:51.940
[crsd(9699410)]CRS-1201:CRSD started on node t24db1.
2011-09-21 20:58:53.151
[ohasd(6947036)]CRS-2765:Resource 'ora.crsd' has failed on server 't24db1'.
2011-09-21 20:58:56.298
[crsd(11600072)]CRS-1012:The OCR service started on node t24db1.
2011-09-21 20:58:56.559
[crsd(11600072)]CRS-1201:CRSD started on node t24db1.
2011-09-21 20:58:57.784
[ohasd(6947036)]CRS-2765:Resource 'ora.crsd' has failed on server 't24db1'.
2011-09-21 20:58:59.428
[crsd(9699414)]CRS-1012:The OCR service started on node t24db1.
2011-09-21 20:58:59.733
[crsd(9699414)]CRS-1201:CRSD started on node t24db1.
2011-09-21 20:59:00.910
[ohasd(6947036)]CRS-2765:Resource 'ora.crsd' has failed on server 't24db1'.
2011-09-21 20:59:02.522
[crsd(9699416)]CRS-1012:The OCR service started on node t24db1.
2011-09-21 20:59:02.798
[crsd(9699416)]CRS-1201:CRSD started on node t24db1.
2011-09-21 20:59:04.030
[ohasd(6947036)]CRS-2765:Resource 'ora.crsd' has failed on server 't24db1'.
2011-09-21 20:59:05.624
[crsd(9699418)]CRS-1012:The OCR service started on node t24db1.
2011-09-21 20:59:05.899
[crsd(9699418)]CRS-1201:CRSD started on node t24db1.
2011-09-21 20:59:07.120
[ohasd(6947036)]CRS-2765:Resource 'ora.crsd' has failed on server 't24db1'.
2011-09-21 20:59:07.121
[ohasd(6947036)]CRS-2771:Maximum restart attempts reached for resource 'ora.crsd'; will not restart.
crsd log
2011-09-21 20:59:06.013: [ default][1]clsu_get_private_ip_addresses: required buffer number is 2. Buffer number passed in 1 is not enough. Return [8]
2011-09-21 20:59:06.013: [GIPCXCPT][1] gipcShutdownF: skipping shutdown, count 2, from [ clsinet.c : 1735], ret gipcretSuccess (0)
2011-09-21 20:59:06.014: [GIPCXCPT][1] gipcShutdownF: skipping shutdown, count 1, from [ clsgpnp0.c : 1021], ret gipcretSuccess (0)
2011-09-21 20:59:06.015: [ CRSCCL][1]Listening endpoint created sucessfully @ (ADDRESS=(PROTOCOL=tcp)(DEV=52)(HOST=192.168.50.15)(PORT=49390)).con = 116b2c4f0
2011-09-21 20:59:06.018: [ CRSCCL][10799]CSS Group Registration complete.
2011-09-21 20:59:06.018: [ CRSCCL][10799]cclGetMemberData called
2011-09-21 20:59:06.020: [ CRSCCL][10799]Obtained first membership map.
2011-09-21 20:59:06.020: [ CRSCCL][10799]Dumping member data ------------------
2011-09-21 20:59:06.020: [ CRSCCL][10799]Member (1, 1411327295) on node port=.
2011-09-21 20:59:06.020: [ CRSCCL][10799]Done ------------------
2011-09-21 20:59:06.020: [ CRSCCL][10799]Waiting for reconfigs
2011-09-21 20:59:06.020: [ CRSCCL][11056]cclCommunicationHandler started.
2011-09-21 20:59:06.020: [ CRSCCL][1]cclLibShutdown called
2011-09-21 20:59:06.120: [ CRSCCL][10799]CCL Shutting down.
2011-09-21 20:59:06.122: [ CRSCCL][10799]CSS Group Unregister complete.
2011-09-21 20:59:06.122: [ CRSCCL][11056]Comunications Shutdown.
2011-09-21 20:59:06.123: [ CRSCCL][10799]Membership Monitor exiting ...
2011-09-21 20:59:06.123: [ CRSCCL][1]Clsc shutting down
2011-09-21 20:59:06.123: [ CRSCCL][1]Clsc server shutdown
2011-09-21 20:59:06.123: [ COMMCRS][1]clscugblmterm: (1158d7970) cleaning up icon (116b2bef0) with 1 cons
2011-09-21 20:59:06.123: [ COMMCRS][1]clscugblmterm: (1158d7970) cleaning up open icon (116b2bef0)
2011-09-21 20:59:06.123: [ CRSCCL][1]Clsc UGBLM shutdown
2011-09-21 20:59:06.123: [ CRSCCL][1]Clsc shutdown Done
2011-09-21 20:59:06.123: [ CRSCCL][1]ccllibShutdown done.
2011-09-21 20:59:06.123: [CLSFRAME][1] clsCclInit returned failure:4
2011-09-21 20:59:06.123: [CLSFRAME][1] Unable to start module-to-module comms: 2
2011-09-21 20:59:06.123: [ CRSD][1][PANIC] CRSD exiting: unable to start CLS framework
2011-09-21 20:59:06.123: [ CRSD][1] Done.
Please assist me on this.
Thanks and Regards,
Daniesh1. try to give root capabilities with CAP_NUMA_ATTACH, CAP_BYPASS_RAC_VMM, and CAP_PROPAGATE
2. install 11.2.0.2 version
I solved the problem rootsh fails to bring up crs. -
Job scheduling failed because the user has no permission to access this rep
Hi. I've OBIP 10.1.3.4.1.
When I launch a print with the scheduler I see this error:
oracle.apps.xdo.servlet.scheduler.ProcessingException: Job scheduling failed because the user has no permission to access this report. [REPORT_URL]=[folderreport/report/report.xdo], [USERNAME]=[administrator]
at oracle.apps.xdo.servlet.ui.scheduler.SchedulerServlet.scheduleJob(SchedulerServlet.java:1140)
at oracle.apps.xdo.servlet.ui.scheduler.SchedulerServlet.doPost(SchedulerServlet.java:295)
at javax.servlet.http.HttpServlet.service(HttpServlet.java:763)
at javax.servlet.http.HttpServlet.service(HttpServlet.java:856)
at com.evermind.server.http.ResourceFilterChain.doFilter(ResourceFilterChain.java:64)
at oracle.apps.xdo.servlet.security.SecurityFilter.doFilter(SecurityFilter.java:100)
at com.evermind.server.http.ServletRequestDispatcher.invoke(ServletRequestDispatcher.java:621)
at com.evermind.server.http.ServletRequestDispatcher.forwardInternal(ServletRequestDispatcher.java:368)
at com.evermind.server.http.HttpRequestHandler.doProcessRequest(HttpRequestHandler.java:866)
at com.evermind.server.http.HttpRequestHandler.processRequest(HttpRequestHandler.java:448)
at com.evermind.server.http.HttpRequestHandler.serveOneRequest(HttpRequestHandler.java:216)
at com.evermind.server.http.HttpRequestHandler.run(HttpRequestHandler.java:117)
at com.evermind.server.http.HttpRequestHandler.run(HttpRequestHandler.java:110)
at oracle.oc4j.network.ServerSocketReadHandler$SafeRunnable.run(ServerSocketReadHandler.java:260)
at oracle.oc4j.network.ServerSocketAcceptHandler.procClientSocket(ServerSocketAcceptHandler.java:239)
at oracle.oc4j.network.ServerSocketAcceptHandler.access$700(ServerSocketAcceptHandler.java:34)
at oracle.oc4j.network.ServerSocketAcceptHandler$AcceptHandlerHorse.run(ServerSocketAcceptHandler.java:880)
at com.evermind.util.ReleasableResourcePooledExecutor$MyWorker.run(ReleasableResourcePooledExecutor.java:303)
at java.lang.Thread.run(Thread.java:595)
In this env. I've a LDAP Security Model and all the report and all the users work.Please check whether you have assigned below responsibility to the user trying to schedule report.
XMLP_SCHEDULER -
Tacacs authentication fails for one user account for only one switch
Hi,
I am having an scenario, where as Tacacs authentication fails for one user account for only one switch.
The same user account works well for other devices.
The AAA configs are same on every devices in the network.
Heres the show tacacs output from the switch where only one user account fails;
Socket opens: 157
Socket closes: 156
Socket aborts: 303
Socket errors: 1
Socket Timeouts: 2
Failed Connect Attempts: 0
Total Packets Sent: 1703
Total Packets Recv: 1243
Expected Replies: 0
What could be the reason ?
No errors on ACS server; same rights had been given to the user account.
Thanks to advise.
PraseyHi there,
Does the user get authenticated in the ACS logs?
reports and activity----> failed attempts
ro
reports and activity-----> passed authentications
That will help narrow it down.
Brad -
I am running an environment with an Active Directory and Terminal Servers.
I have searched high and low for resolutions to this error but I cannot find anything related to my situation, let me explain further.
The fixes I found are related to local users only.
When I create a new user in the Active Directory I provide the paths to the profile folder in the "Remote Desktop Profile" and "Profile tab" lets say for example \\ad001\home\%username% and \\ad001\profil\%username% .
I give rights to the user to read/write the "home" folder which is mapped for folder redirection. An I know that when the user first logs on it should create a "v2.%username%" folder upon successful logon. This is when I am
presented with the error message below:
"The registration of the service "User Profile Service" has failed.
The user profile can not be loaded"
Does anyone have any experience with this or know a suitable fix. Again this is for the "Roaming" profile creation no local.
Many thanks in advance.Hi,
Thank you for posting in Windows Server Forum.
Did you receive for any one user or for all users?
Have you tried to solve the issue by fixing the user account profile?
For that you can adjust the registry setting “ProfileImagePath” with
particular SID of that user under below mention path.
HKEY_LOCAL_MACHINE\SOFTWARE\Microsoft\Windows NT\CurrentVersion\ProfileList
Also if this can’t resolve the issue you can try to delete the SID of that user or renaming the old and and then check the result again by creating new profile for that users.
More information.
You receive a "The User Profile Service failed the logon” error message
http://support.microsoft.com/kb/947215
Hope it helps!
Thanks.
Dharmesh Solanki -
How to create a new user over HTTPS
Hi. I have set up conf.xml and web.xml so that when the user accesses a page in the secure area of the website, then they are taken to a login page where they enter their username and password and the form calls j_security_check on the server. All this happens over SSL as the transport garauntee is CONFIDENTIAL. But how to create a new user over HTTPS? If I have a create new account pages in the secure area of the website, then the only way the user can access these pages is by logging in, but they don't have a login as yet.
An update. It looks that if the auth-constraint section (which lists the roles that can access this area) is missing, then everyone can access the region and it is over HTTPS. So far, the following seems to be working
<security-constraint>
<display-name>View My Account</display-name>
<web-resource-collection>
<web-resource-name>My Account Area</web-resource-name>
<url-pattern>/myaccount/*</url-pattern>
</web-resource-collection>
<auth-constraint>
<role-name>myrole</role-name>
</auth-constraint>
<user-data-constraint>
<transport-guarantee>CONFIDENTIAL</transport-guarantee>
</user-data-constraint>
</security-constraint>
<login-config>
<auth-method>FORM</auth-method>
<realm-name>Form-Based Authentication Area</realm-name>
<form-login-config>
<form-login-page>/newaccount/login.html</form-login-page>
<form-error-page>/newaccount/loginerr.html</form-error-page>
</form-login-config>
</login-config>
<security-role>
<role-name>myrole</role-name>
</security-role>
<security-constraint>
<display-name>Create New Account</display-name>
<web-resource-collection>
<web-resource-name>New Account Area</web-resource-name>
<url-pattern>/newaccount/*</url-pattern>
</web-resource-collection>
<user-data-constraint>
<transport-guarantee>CONFIDENTIAL</transport-guarantee>
</user-data-constraint>
</security-constraint> -
Analytical Services failed to get user's parent group tree with Error
Hi,
We have a frequent errror during our weekly batch for an application.
The context:
- Essbase Administration Services we are using is version is 9.3.1.
- 8 applications are calculated during the week-end. The scripts executed are exactly the same for the 8 applications.
- For example let's say that 5 scripts are launched during the night in the batch for each application (script 1, script 2 ... script 5)
- App1 and App2 are launched alone and before the 6 others applications as these applications database are 3 x bigger (App1 is calculated alone, then app2 is calculated alone, then app3 to app8 scripts are launched in the same time).
The issue :
- We don't see any issue for app3 to app8, the calculation are executed without any problem from script1 to script5.
- But we have an error in App1 and App2 log when the bath execute script 4 and we see the following error in the server log **
"Analytical Services failed to get user's parent group tree with Error".
(** : we don't see any log for script 4 in the application log - it's like the server bypass script 4 to go directly from script 3 to script 5 )
Nothing special is done in script 4 but just an aggregation of the Year dimension (using a @SUM(@RELATIVE(Year,0)) calculation.
I think that there is may be a synchronization error with Shared Services but what is strange is that it's always for the same script 4 and the batch is launched at different time every week-end.
Can the issue be linked to the size of the database of applications (8 Gb) and difficulties for the processor to executes aggregation in a large database volume ?Hi,
According to your description, my understanding is that the error occurred when sending an email to the user in workflow.
Did you delete the existing Connections before setting NetBiosDomainNamesEnabled?
If not, I recommend to delete and recreate your AD connections, then set NetBiosDomainNamesEnabled to true.
Or you can delete the original User Profile Service Application and create a new one, then set the NetBiosDomainNamesEnabled to true and start the User Profile Service Application
synchronization.
More reference:
http://social.technet.microsoft.com/wiki/contents/articles/18060.sharepoint-20xx-what-if-the-domain-netbios-name-is-different-than-the-fqdn-of-the-domain-with-user-profile.aspx
Best regards.
Thanks
Victoria Xia
TechNet Community Support -
Good Afternoon Everyone,
I am not technologically savvy as a result I'm having trouble understanding previous posts on "The user profile service service failed to logon user profile cannot be loaded." Lingo on domain reset etc, not sure that this pertains to solving my issue
... I cant even get pass the sign in page let alone make changes. I am having this issue with my Dell Studio XPS 1340 with Windows 7 Home Premium. If anyone can provide their two cents I would greatly appreciate.
Very Respectfully,
Jesse"Jesse.soto1" wrote in message news:1e164fdf-7370-45c0-9bc7-3b58278121c3...
Good Afternoon Everyone,
I am not technologically savvy as a result I'm having trouble understanding previous posts on "The user profile service service failed to logon user profile cannot be loaded." Lingo on domain reset etc, not sure that this pertains to solving my issue
... I cant even get pass the sign in page let alone make changes. I am having this issue with my Dell Studio XPS 1340 with Windows 7 Home Premium. If anyone can provide their two cents I would greatly appreciate.
Very Respectfully,
Jesse
Home Premium cannot logon to a Domain, nor can it be set to try it.
when you get the logon window, try hitting the three-finger salute )Ctrl+Alt+Del) twice – it may bring up the old-style login window – enter your credentials there.
Noel Paton | Nil Carborundum Illegitemi |
CrashFixPC | The Three-toed Sloth -
'Failed to bring network up' wireless ath5k [SOLVED]
After a fresh install I tried to connect to my wireless network using
netctl, which resulted in the following error:
netctl status wlp0s6
● netctl@wlp0s6\x2dWLAN\x2d50114.service - Networking for netctl profile wlp0s6-WLAN-50114
Loaded: loaded (/usr/lib/systemd/system/[email protected]; static)
Active: failed (Result: exit-code) since Tue 2014-08-19 13:22:55 CEST; 2min 0s ago
Docs: man:netctl.profile(5)
Process: 3512 ExecStart=/usr/lib/network/network start %I (code=exited, status=1/FAILURE)
Main PID: 3512 (code=exited, status=1/FAILURE)
Aug 19 13:22:49 faze network[3512]: Starting network profile 'wlp0s6-WLAN-50114'...
Aug 19 13:22:55 faze network[3512]: Failed to bring the network up for profile 'wlp0s6-WLAN-50114'
Aug 19 13:22:55 faze systemd[1]: netctl@wlp0s6\x2dWLAN\x2d50114.service: main process exited, code=exited, status=1/FAILURE
Aug 19 13:22:55 faze systemd[1]: Failed to start Networking for netctl profile wlp0s6-WLAN-50114.
Aug 19 13:22:55 faze systemd[1]: Unit netctl@wlp0s6\x2dWLAN\x2d50114.service entered failed state.
So I looked into journalctl -xn
-- Logs begin at Tue 2014-08-19 02:35:29 CEST, end at Tue 2014-08-19 13:27:29 CEST. --
Aug 19 13:24:56 faze sudo[3714]: pam_unix(sudo:session): session opened for user root by (uid=0)
Aug 19 13:24:56 faze sudo[3714]: pam_unix(sudo:session): session closed for user root
Aug 19 13:27:23 faze sudo[3868]: erik : TTY=pts/1 ; PWD=/home/erik ; USER=root ; COMMAND=/usr/bin/netctl start wlp0s6-WLAN-50114
Aug 19 13:27:23 faze sudo[3868]: pam_unix(sudo:session): session opened for user root by (uid=0)
Aug 19 13:27:23 faze network[3879]: Starting network profile 'wlp0s6-WLAN-50114'...
Aug 19 13:27:29 faze network[3879]: Failed to bring the network up for profile 'wlp0s6-WLAN-50114'
Aug 19 13:27:29 faze systemd[1]: netctl@wlp0s6\x2dWLAN\x2d50114.service: main process exited, code=exited, status=1/FAILURE
Aug 19 13:27:29 faze systemd[1]: Failed to start Networking for netctl profile wlp0s6-WLAN-50114.
-- Subject: Unit netctl@wlp0s6\x2dWLAN\x2d50114.service has failed
-- Defined-By: systemd
-- Support: http://lists.freedesktop.org/mailman/listinfo/systemd-devel
-- Unit netctl@wlp0s6\x2dWLAN\x2d50114.service has failed.
-- The result is failed.
Aug 19 13:27:29 faze systemd[1]: Unit netctl@wlp0s6\x2dWLAN\x2d50114.service entered failed state.
Aug 19 13:27:29 faze sudo[3868]: pam_unix(sudo:session): session closed for user root
Nothing new here
After that I tried ip link set wlp0s6 up, which spew out this error:
RTNETLINK answers: Operation not possible due to RF-kill
From here on, I don't really know what to do.
lspci -k output:
00:00.0 Host bridge: VIA Technologies, Inc. CN700/VN800/P4M800CE/Pro Host Bridge
Subsystem: Fujitsu Technology Solutions Device 10cd
Kernel driver in use: agpgart-via
Kernel modules: via_agp
00:00.1 Host bridge: VIA Technologies, Inc. CN700/VN800/P4M800CE/Pro Host Bridge
00:00.2 Host bridge: VIA Technologies, Inc. CN700/VN800/P4M800CE/Pro Host Bridge
00:00.3 Host bridge: VIA Technologies, Inc. PT890 Host Bridge
Kernel modules: via_agp
00:00.4 Host bridge: VIA Technologies, Inc. CN700/VN800/P4M800CE/Pro Host Bridge
00:00.7 Host bridge: VIA Technologies, Inc. CN700/VN800/P4M800CE/Pro Host Bridge
00:01.0 PCI bridge: VIA Technologies, Inc. VT8237/VX700 PCI Bridge
Kernel modules: shpchp
00:06.0 Ethernet controller: Qualcomm Atheros AR2413/AR2414 Wireless Network Adapter [AR5005G(S) 802.11bg] (rev 01)
Subsystem: Qualcomm Atheros Compex Wireless 802.11 b/g MiniPCI Adapter, Rev A1 [WLM54G]
Kernel driver in use: ath5k
Kernel modules: ath5k
00:0f.0 IDE interface: VIA Technologies, Inc. VIA VT6420 SATA RAID Controller (rev 80)
Subsystem: Fujitsu Technology Solutions Device 10cd
Kernel driver in use: sata_via
Kernel modules: sata_via, pata_acpi, ata_generic
00:0f.1 IDE interface: VIA Technologies, Inc. VT82C586A/B/VT82C686/A/B/VT823x/A/C PIPC Bus Master IDE (rev 06)
Subsystem: Fujitsu Technology Solutions Device 10cd
Kernel driver in use: pata_via
Kernel modules: pata_via, pata_acpi, ata_generic
00:10.0 USB controller: VIA Technologies, Inc. VT82xxxxx UHCI USB 1.1 Controller (rev 81)
Subsystem: Fujitsu Technology Solutions Device 10cd
Kernel driver in use: uhci_hcd
Kernel modules: uhci_hcd
00:10.1 USB controller: VIA Technologies, Inc. VT82xxxxx UHCI USB 1.1 Controller (rev 81)
Subsystem: Fujitsu Technology Solutions Device 10cd
Kernel driver in use: uhci_hcd
Kernel modules: uhci_hcd
00:10.4 USB controller: VIA Technologies, Inc. USB 2.0 (rev 86)
Subsystem: Fujitsu Technology Solutions Device 10cd
Kernel driver in use: ehci-pci
Kernel modules: ehci_pci
00:11.0 ISA bridge: VIA Technologies, Inc. VT8237 ISA bridge [KT600/K8T800/K8T890 South]
Subsystem: Advanced System Products, Inc Device 1734
Kernel modules: i2c_viapro
00:11.5 Multimedia audio controller: VIA Technologies, Inc. VT8233/A/8235/8237 AC97 Audio Controller (rev 60)
Subsystem: Fujitsu Technology Solutions Device 10cd
Kernel driver in use: snd_via82xx
Kernel modules: snd_via82xx
00:11.6 Communication controller: VIA Technologies, Inc. AC'97 Modem Controller (rev 80)
Subsystem: Fujitsu Technology Solutions Device 10cd
Kernel driver in use: snd_via82xx_modem
Kernel modules: snd_via82xx_modem
00:12.0 Ethernet controller: VIA Technologies, Inc. VT6102 [Rhine-II] (rev 78)
Subsystem: Fujitsu Technology Solutions Device 10cd
Kernel driver in use: via-rhine
Kernel modules: via_rhine
01:00.0 VGA compatible controller: VIA Technologies, Inc. CN700/P4M800 Pro/P4M800 CE/VN800 Graphics [S3 UniChrome Pro] (rev 01)
Subsystem: Fujitsu Technology Solutions Device 10cd
Kernel modules: viafb
Any ideas?
Last edited by er1k (2014-08-19 10:28:49)Nevermind, got it working.
It seems I just forgot to type the rest of the clunky auto-generated network profile name.
Thanks for the quick help nonetheless!
Last edited by er1k (2014-08-19 10:29:34) -
Failed to convert user externalID servermgr_xcode
since i upgraded to 10.9 and server 3.0 i get flooded with the following messages.
[CSODService.m:78 9d38000 +0ms] Failed to convert user externalID servermgr_xcode to uuid_t for membership check
So I installed Xcode and integrated it via servermgr in the hope that this helps. But it didnt help.
cd /Applications/Server.app/
macmini:Server.app root# find . -type f -exec grep "CSODService.m" {} \;
showed:
Binary file ./Contents/ServerRoot/usr/share/collabd/server/servicebundles/CSODService.bundl e/Contents/MacOS/CSODService matches
So i switched of the messaging service . No effect.
Ideas ?
ThxI reinstalled iTunes in an effort to fix a hanging issue, and then this started up pretty heavily.
Did you ever get anywhere? -
All Im very new to Oracle DRM and Im trying to get the app setup on Windows server running SQL Server 2008. When I try to login to the Web Client I keep getting this error.
DRM-61026: Unable to create user session for the following reason: Login failed. Invalid user name or password.
Can you please helpThis might be due to The 'Oracle Instance' path may not have been set to a path relative to the 'CSS Bridge Host' (i.e. the Foundation Services machine) on the Configuration > Host Machines > CSS > General tab of the DRM Configuration Utility.
if this is the case then
1. Open the DRM Configuration Console.
2. Go to the Configuration > Host Machines > CSS > General tab of the DRM Configuration Utility.
3. Ensure that the path in 'Oracle Instance' has been set relative to the 'CSS Bridge Host' (i.e. the Foundation Services machine defined in 'CSS Bridge Host').
4. If corrections are made to 'Oracle Instance' then restart the DRM services to pick up the change.
Thanks,
~KKT~ -
Failed to accept user input when run report on Web
I've testing a report with one input parameter. It's a date with default current date. It is done by using SQL 'select sysdate from dual;' has been added to before form trigger. User is allowed to input any date other than the default sysdate before submitting the report. The report works fine when run in report builder, but it's failed to accepted user input date when called through web browser. The report still uses the current date as SQL parameter rather than user input date.
Can anyone help me to fix this bug?
The report is develped by Oracle 9i and is saved and run in .rdf format.I created a report with a user defined parameter p_date of DATE type. In the layout model, I created a field with p_date as data source. In the before form trigger, I put
'select sysdate into :p_date from dual;
I run the report through rwservlet:
http://host:port/reports/rwservlet?report=datetest.rdf&destype=cache&desformat=html&userid=scott/tiger@orcl¶mform=yes
In the html parameter form, I change the date from default current date to a future date and that date is shown in the final report.
So I can't reproduce the bug.
One thing you can try it to turn on reports server trace file, see what command line is sent to reports server when you submitting the parameter form.
Thanks,
-Shaun -
Lync phone show failed to obtain user ceetificate
hd420 show failed to obtian user certificate.
it happen on remote site. so far one site have this problem.
how can i import user certificate manually?
it is on-premise lync 2013 server.
thanks.Hi Jo Tse,
You cannot manually install certificates on the device.
The CDP (CRL distribution point) will only appear on certificates created AFTER the CDP is defined. This means that if you have issued certificates, you will need to re-issue certificates
to have the CDP available to those computers. There is no way around this.
About how to configure the CDP, you can refer to the following article.
http://blogs.technet.com/b/nexthop/archive/2012/12/17/creating-a-certificate-revocation-list-distribution-point-for-your-internal-certification-authority.aspx
Best regards,
Eric
Please remember to mark the replies as answers if they help, and unmark the answers if they provide no help. If you have feedback for TechNet Support, contact [email protected]
Maybe you are looking for
-
IPod Touch 1st generation-texting
I just purchased a refurbished iPod Touch 1st generation for my 10 year old for Christmas. Is there an app she can use on it to text for free with wifi?
-
I have maintained a website for many years here. Recently, I have decided I need to make some updates. I always used FTP protocol to upload the new changes, but no that that is no longer accepted by verizon, how do I upload the updates. Thank you in
-
Users will use form to fill in stats for enquiries so they want to keep form open, complete a form, click button to submit by email, then click another button to clear form, form now ready to accept form's responses. They dont' want to keep opening
-
Actual Work Overwrites Duration
Hi All I sooooo hope somebody can assist me. I think I am about to go mad. I have a problem on PWA. Timesheet or Tasks view. Scenario: Project 1 with one task. Duration and all units set to Hours (in project professional and PWA views). Default ta
-
Really, really, really slow user boot up
I had a complete freeze up on Friday morning and I did a hard reboot on my iMac (2011, i7). When it restarted it took forever to get the first appearance of the desktop picture to an actual responsive computer (10 minutes or more). It was spending ti