G5 shuts down when Portable external drive connected to Fire wire port

Hi, I hope somebody can help me. I have a 100G lacie portable external HD that I use to back up my files regularly. It worked until today, I plug it in, I was able to save some files, and then the computer shut down. I restarted it and it did the same thing. Black screen. nothing. I have another External HD with its own power supply connected to the same computer and that one works. I tried plugging the Portable HD to the back of the one with Power supply and it shut down as well. Then I plugged it in the back of my 19" LCD, same thing. So I though that the portable HD was bad, I went and bought another drive, a verbatim, and same thing happen. I then plugged my lacie drive to another computer, a G4, and it works which leads me to think that the problem is in the G5, any suggestions would be appreciated.

Thought this may be the issue, problem is the USB3.0 connector is 2 micro USB side by side in a single plastic moulding, have searched for separate USB cables but cannot find them.

Similar Messages

Time machine has losing contact with my external drive, connected via a USB port.

Recently my Time Machine program has begun losing contact with my external drive, connected via a USB port. When I attempt to open Time Machine, it indicates there is no external hard drive. When I click on "setting up time machine" it opens airport utility. I've tried rebooting, run disk utility repairs for both hard discs, pulled and reconnected the USB cable, even completely shut down the system. Eventually the two re-establish contact, but I'm not certain what I've done that causes this. The lost contact appears to happen during the weekends. The external hard drive is a MJaxtor OneTouch 4. What should I be doing to solve this problem once and for all?

I use a little app named EasyFind - free at the App Store. It will allow you to search individual volumes or all volumes.
Download it and see if it will help.
Clinton

External drive - USB or Fire wire or AC

Hello I dont know where to put this question so: Which would be the best for a 500GB external drive, USB & fire wire or AC? I want a portable external drive (2.5) but am not sure whether AC is best route or if USB/Fire wire?
Thank you
Veedeekay

Which would be the best for a 500GB external drive, USB & fire wire
Use FireWire, not USB.
I ALWAYS build my own drive (takes 5 mins). More storage and less money.
 I like the TD-M120 enclosure, it's the best I know of.
Has a cooling fan, shock absorbers, and all the ports you will ever need. 
   http://www.cooldrives.com/ox93saiihadr.html
http://www.onnto.com.tw/product.asp?sys_sysno=31
And this drive:  
http://www.amazon.com/Western-Digital-Intellipower-Desktop-WD20EADS/dp/B001RB1TI S/ref=sr11?ie=UTF8&s=electronics&qid=1258862242&sr=8-1

Do all maxtror drives have 2 fire wire ports

Hi all,
Im trying to buy a hard drive (maxtor seem to have been good to me so far) they have a new one called ONE TOUCH 3 but I cant seem to find out if they have 2 fire wire ports.
All the spoecs say this
"We stock 300GB and 500GB version with both USB 2.0 and Firewire 400 interface, please select storage capacity at the bottom."
Any tips ?
T
Thanks in advance
justin

If you are planning on using this for video work you should look elsewhere. It is not designed for that application.
If you are looking for a drive to simply back up data, it should work.
Generally recommended drives for DV and HDV include: G-tech & Granite Digital. Both of them make highly engineered drive solutions and include Hitachi mechanisms.
If you are thinking of working with uncompressed footage, then much more specialized drives/enclosures/connections are required.
good luck.
x

Why does my computer shut down when i try to connect to the internet?

I have recently found that when i'm trying to connect to the internet, a box is appearing something like This device does not exist, please check your settings and try again. My settings are fine, my wires are connected and i cant find any reason why the connection wouldn't work. I have shut down my computer and this hasn't helped when i have restarted it and now, the screen has gone dark with an scary box saying the computer has to restart itself. No reason is given (or at least i can't remember if there was a reason). My computer is going a bit slower now and is making a noise like an application is opening or the computer is doing something.
Can anyone help???? I have only had my i baby for a few months. I do download stuff all the time and i have been known to leave my internet connection on for a day at a time. Could this have caused the problem?

Close all apps in the multi-task window and try again.
1.Double-click the Home button.
2. Swipe the app's preview up to close it.
3. Preview will fly off the screen.

Satellite A200 won't shut down when power supply is connected

The Satellite A200 just shuts down, if the power cable is disconnected before shutting down. Otherwise the notebook shuts down and restarts immediately (max 5 seconds between shut down and restart).
Does anybody got the same strange problem?

Hi Thomas
You should definitely contact the ASP in your country. Maybe its something wrong with the power supply electronic on the notebooks motherboard.
As John said the replacement should be done for free because the A200 is a new series and the warranty should be valid.
Good luck

Mac Mini sluggish when USB external drives connected

I'm not sure what's causing this issue, but I have a Late 2012 Mac Mini and when I plug in a USB 3.0 thumb drive or my WD My Book Studio (also USB 3.0), the mouse cursor is very sluggish and laggy. I will physically move around my mouse and the cursor is extremely slow to reflect such movements on the screen. It did it with an empty USB flash drive, so there's no indexing or anything else going on in the background. Ejecting the drive will not solve this issue until I physically remove the drive from the USB port. What's causing this and how do I fix it?

format the drives for MAC OSX extended journeled.....when you do that, is the problem still present?
Ive head of this before on WD drives (cant stand them) because they have some nasty bloat loaded onto them for installing them (no need for that EVER) on your computer.
when you insert the WD drive, does the drive come up AND ANOTHER icon saying something like "WD xxxx" (i recall its something like WD utility, or WD support) ???
Ive got nearly 100 hard drives, but wont own a WD, ....if i get a free one, i destroy anything on it with a erase and wipe with disk utility "format for mac osx extended journaled"
AS FOR YOUR STICK DRIVE,......are you sure its mac compatable??? most stick drives list that in the fine print, and mac owners buy a cheap stick drive that isnt 'kosher' with MAC

Best practices with external drives connected to Time Capsule?

I'm enjoying my new MBP but the storage limitations are a challenge with twenty+ years of data. I know it's not technically sanctioned by Apple but in another forum I found a discussion about successfully connecting an external drive to the Time Capsule. I tried this for a few months and had some problems, so I wonder if anyone here might have some insight into which of my drives would be best to use in this way and what, if anything, I must do to bless it for the task.
The drive most highly recommended in the forums at the time is the WD My Book. After buying it I learned that is Windows users install a package and update the driver for use with Time Machine, which Mac users are not able to do. The driver is available on the web but it's said to cause problems with Mountain Lion, which I can confirm. It's USB 3.0 and powered, though, which my two alternatives are not. It's also 2 TB and presently in two partitions. I also have a Seagate Free Agent GoFlex 500 which gets extremely hot with any use and an Iomega eGo Helium 500 I've been using for backups. Both are USB 2.0.
My goal is to put my iTunes Library and Time Capsule on the net (running 2.4 Ghz and 5 Ghz, averages 50Mbs). When I did this for a few months with the WD both its shares frequently dropped off my Desktop, as if powered down or something. Also there were the issues with Time Machine many others are having. Right now our video collection sits on the Time Capsule. Would it make sense to move our video to the WD and run iTunes and Time Machine on it? If so, do you have any tips for formatting, petitioning, or drivers (or anything else) to help this run smoothly? The WD works fine when hard-wired and the TC, too is fine without the WD at the party.
With apologies for the tome.

kevlee64 wrote:
Thanks, but the drive is connected directly to the back of the Time Capsule by an ethernet cable.
Ah, that's a different colored horse.
You have a NAS (Network Attached Storage) drive, not a USB external drive connected to the USB port.
Many of those need software/firmware updates to work with Lion. Check with Iomega.

Adobe Bridge shuts down when I try to access files on my external drive. Have been using the drive for months with no problems.

Adobe Bridge shuts down when I try to access files on my external drive. Have been using the drive for several months with no problems.

Due to the current unavailability of clairvoyants and mind-readers in the forum, we respectfully request you supply sensible, complete details.
A lot more information about your hardware and software is needed.
BOILERPLATE TEXT:
If you give complete and detailed information about your setup and the issue at hand,
such as your platform (Mac or Win),
exact versions of your OS, of Photoshop (not just "CC", but something like CC2014.v.2.2) and of Bridge,
your settings in Photoshop > Preference > Performance
the type of file you were working on,
machine specs, such as total installed RAM, scratch file HDs, total available HD space, video card specs, including total VRAM installed,
what troubleshooting steps you have taken so far,
what error message(s) you receive,
if having issues opening raw files also the exact camera make and model that generated them,
if you're having printing issues, indicate the exact make and model of your printer, paper size, image dimensions in pixels (so many pixels wide by so many pixels high). if going through a RIP, specify that too.
a screen shot of your settings or of the image could be very helpful too,
etc.,
someone may be able to help you (not necessarily this poster, who is not a Windows user).
Please read this FAQ for advice on how to ask your questions correctly for quicker and better answers:
http://forums.adobe.com/thread/419981?tstart=0
Thanks!

My mac book pro shuts down when I connect external displays.

I use my macbook pro for projecting keynote presentations and also to a 90" monitor. I've been able to do this until the lastest software update. Now the computer shuts down when I connect to the projector and monitor. I'm at witts end. Regretting I did latest update. Thanks for any help.

Have you reset the SMC and PRAM?

My MacBook Pro shuts down when i connect a USB cable.

My MacBook Pro shuts down when i connect a USB cable, only when its a 30 pin apple cable. Well one USB shuts it down and the other one doesn't work at all.
it only happens when i use an apple cable. It has no problem with my external drive nor with other things.
Ps. i did use different apple cables and they all shut it down.

What are you connecting? iPad, iPhone, what?
When you say a 30-pin Apple cable do you mean a Lightening to USB cable?
Little more info needed...
Clinton

X200 hangs during restart or shut down when connected to ultrabase

My X200 hangs during a Windows restart or shut down when I'm connected to my ultrabase. The laptop appears to go through most of the processes to restart/shut down but eventually hangs at a blue screen with unmoveable cursor (note, not a Windows BSOD). I'm forced to perform a hard shut down to turn off the laptop.
This hang at restart/shut down only occurs when I'm connected to the ultrabase.

Just as a thing to try, and this is assuming that you all have an integrated camera, please try this camera driver and let the board know the results:
http://www-307.ibm.com/pc/support/site.wss/document.do?lndocid=MIGR-70600

ITunes shuts down when I connect my iPod 30gb

I desperately need help. Recently my computer crashes and I reformated it. So I had to reinstall iTunes. Ever since then iTunes shuts down when I connect my iPod 30gb. A windows error message appears saying iTunes has encountered a problem and needs to shut down. I am unable to update my iPod which drives me crazy. Somebody please help!
I browsed through some threads which have similar problems as I do, but I am unable to reply in any. It says: This topic has been archived - replies are not allowed.
There's this thread here about the problem I am facing but I doesn't seem to understand the solution to it.
http://discussions.apple.com/thread.jspa?messageID=1630589
Can somebody please help me?

A windows error message appears saying iTunes has encountered a problem and needs to shut down.
let's get a crash log from itunes, and send it to the Apple engineers for a look.
Typically, you'll need to configure Dr. Watson on your PC in order to generate crash logs. Windows start menu -> Run. Type in "cmd". Hit return. At the prompt in the command line window that comes up, type in
drwtsn32 -i
And hit return.
This will create crash logs in Documents And Settings\All Users\Application Data\Microsoft\Dr Watson\. There'll usually be a file in here called "drwtsn32.log"
prior to collecting the itunes crash log, delete any existing crash logs in there. (we want to make sure we send the correct crash log.)
Generate the crash, collect the crash log, and and send it as an attachment to this email address.
in the email to Roy, be sure to include the following information:
- A link to the thread on Apple Discussions where the issue is being discussed
- The username you are using in the thread
- The version of iTunes you are using or trying to use
- the version of Windows you are using (mention service packs)
- A concise description of the issue you are seeing
- The exact text of the error message you are seeing

Laptop shuts down when trying to connect

Bought a WRT110, installed software, and everytime the router and the wi-fi on my laptop are turned on, the laptop shuts down and restarts. Anybody have this problem before?

I have the same problem. I just installed a new WRT160N on the desktop but my Toshiba M35x-S311 shuts down when I switch on the wireless connection. What's going on?

MBP shuts down when connecting to power

Since a week or two, my MacBookPro from early 2011 shuts down when connecting the magsafe to power. Also when starting up again it will start up fine and fast from battery, but I need to hold the power button for several seconds when connected to power.
Another problem I had earlier as well is CPU (kernel task) of over 90%, which I now see clearly, only occurs when connected to power. I used to solve this problem by putting the MBP to sleep, but now, when put to sleep, it will shut down.
When on battery, I have no CPU problem and can put machine to sleep without a problem.
I recently started uploading everything to dropbox, and activate caffeine to make sure it will keep uploading. My computer will run for days on power combined with caffeine, but is as slow as **** because of a >90% CPU.
The battery has had a notification for maybe a year, that it needed service, so today I finally bought and installed a new battery, but the problem is not solved. Is this software or could it be my magsafe adapter? Thanks for you help.

It sounds like a problem with the power management inside your MBP. I suggest you call Apple to make an appointment at your local Apple store for them to check it out for you.

G5 shuts down when Portable external drive connected to Fire wire port

Similar Messages

Maybe you are looking for