G5 sound input reads drums but no sound coming out

i'm not sure what the deal is, the input is reading my drums fine but i hear no sound not through headphones or surround sound or computers speakers. All my sound works for anyhting else. please help me

My present computer has no sound input capabilities but there may be a setting in sound control panels or whatever software you are using for selecting sound output, including passthrough. There's also a midi application in your applications that controls sound features.

Similar Messages

  • Weird sound coming out of x61 when on battery

    Hi all,
    I need advise, when my x61 is on battery only , there are werid sounds coming out but when its on battery and power or just power , the sound disappear.
    I try changing to another battery, the same thing happen..
    I really need help.
    Thanks.

    I also have a terrible sound coming out of the left side of my computer when on high performance battery power. (I started a thread... however no responses)
    I sent it in, they replaced motherboard and hdd, now I sent it back to get the fan replaced.
    I guess my biggest question is, what will Lenovo do to fix this? (assuming the fan doesn't fix the noise problem)

  • I just purchased a 6  and there is a static sound coming out of the speaker when it is idle. I have the sound on low and turned off and it still makes the static sound.

    I just purchased a 128 Gig iPhone 6+. When I have the sound off and volume as low as possible, I get a static sound coming out of the speakers. It is distracting and annoying when I am in meetings, etc. Does anyone know what to do? Thanks in advance.

    Couple of things you can try but it looks like you may have to take it in
    1. Settings --> Cellular --> Change "Enable LTE" to just "Data" if available
    2. Toggle your ringer off and on
    3. Settings --> General --> Accessibility --> Toggle Noise reduction off and on
    If none of the above works - consider taking it to Apple
    If you hear no sound or distorted sound from your iPhone, iPad, or iPod touch speaker - Apple Support

  • Little parasite noise sound coming out of the Ipod when charging

    When the Ipod is plugged to the wall charger, there's a little parasite sound coming out. It's barely audible but I wonder if it's normal?

    This is a normal sound when charging the iPod, in fact almost all electronics give off a faint buzzing sound when charging. It is nothing to worry about, and will not affect you're iPod in any way.
    Regards--- Justin

  • Is there any app or something, that can do that, you can stream any sound coming out of your mac to your airport express?

    Is there any app or something, that can do that, you can stream any sound coming out of your mac to your airport express?

    Yes, he would have to have jailbroken your phone to install malware. If you see an app called "Cydia", that would indicate conclusively that it was jailbroken. I would recommend restoring the phone as new using iTunes. It is your best shot at removing a jailbreak.
    You should also change your network password, your email password and your FB password as well as passwords to anything else you've used from the phone. Put a lock code on the phone.
    Your best defense against this sort of thing is to NOT give your phone to people you don't trust.
    This is a user-to-user forum, by the way. Apple employees don't participate here. If you want to talk to someone from Apple, make an appointment at the Genius Bar at your local Apple Store.

  • HT3656 my evb3 don't have sound coming out i can i make it work'

    my evb3 don't have sound coming out i can i make it work'

    The EVB3 requires the MIDI channel to be 1.

  • I don't have any external sound coming out

    I don't have any external sound coming out, what do I do?

    Remove the headphone.
    If you see red light in the headphone port, plug the headphone
    in and out of the port 5 or 6 times to flip the microswitch inside.
    Sound output may be stuck in the digital mode.
    Reset PRAM.  http://support.apple.com/kb/PH4405
    Reset SMC.     http://support.apple.com/kb/HT3964
    Choose the method for:
    "Resetting SMC on portables with a battery you should not remove on your own".
    Best.

  • Help, i am trying to print my JPEG file that i created in photoshop at a photo lab but it is coming out like an X-ray. I have printed these files before so i have no idea what i am doing wrong.

    Help, i am trying to print my JPEG file that i created in photoshop at a photo lab but it is coming out like an X-ray. I have printed these files before so i have no idea what i am doing wrong.
    Could it be something i have done in my settings?
    or when i am saving the file to JPEG?

    Basically you're approaching this the wrong way around. What you need is the extreme sections to be quieter, not louder. The problem with moving the lower end of the audio is that you'll move the noise floor too, and get what's generally referred to as a 'pumping' effect. So what you do is to use a compressor to tame the peaks, and leave the lower level sound alone. When you've done that, you amplify (or normalize to a level you can determine) the whole signal. So the noise floor will be higher, but constant and not pumping. 'Match Volume' is a completely different tool for setting the overall levels of different tracks so that they sound approximately the same - it doesn't even begin to do what you want.
    If it's music you are treating, then I'd almost certainly use the multiband compressor, because you get less artefacts with this. You need to experiment with the threshold levels, and almost certainly not use a massive compression ratio - 3:1 or 4:1 should be sufficient (although it's hard to tell without actually hearing the audio). You can tell what it's doing at any given point because the downward meter indicates how hard it's working. In theory you can apply make-up gain with it as well, but personally I leave that until everything's treated and use the 'Normalize' tool to set an absolute max level.

  • New ink in Deskjet F380 but pages still coming out blank!!

    New ink in Deskjet F380 but pages still coming out blank!!

    Hi annettepmcp,
    I see that you're having problems with your printer.  I would take a look at the document below.
    Print Quality
    Let me know how it goes. 

  • Sound indicators moving but no sounds coming out

    My sound was working fine yesterday, but today I can see the sound indicator meter moving up and down, but no noise is coming out. I am using my new pavilion g6-1b70us notebook pc,

    I have just encountered the same problem.  I updated the BIOS and a few other things at the prompting of the HP Support Assistant and now no sound comes out of my speakers or my headphones.  I can also see the sound indicator moving.  I am using a new Pavilion g6-1b00 Notebook PC.  It was working fine a few hours ago, and now nothing.
    I talked to HP support and after trying several different things that didn't work (reinstalling audio driver, system restore, couldn't undo BIOS update) the support guy suggested a reset to factory settings.  I'd really rather not do that, as I don't have an external harddrive to move my data to at the moment.  I'd love to see a different solution to this problem.

  • No sound coming out of external speakers

    Here's my situtation. I just recently received my MacBook and I wanted to connect my external speakers that I used with my previous PC laptop. It worked perfectly with the PC laptop. When I plug in the speaker cord into the port, no sound comes out of the external speakers. But sound comes out of the internal MacBook speakers.
    I plugged it in the right port.
    Volume is on both in the MacBook and the external speakers.
    Speakers are on.
    Speakers worked fine with my PC laptop.
    What can i do? The connection is fine because it was just plugged in my PC laptop and they were working. Thanks in advance for any help.

    Thanks for the reply. This is what i tried...its really weird but it works.
    I plugged in the speaker plug into the port with the headphone symbol and now sound comes out of the speakers! (Maybe this was the correct port in the first place! Sorry for the newbie mistake.) I was used to ports being color coded and I just plugged in the green speaker cord into the green port on my PC.
    So the port on the left is for audio in right?
    And the port with the headphone symbol is for headphones and speaker (audio out)
    When I go to to System Preferences, it recognizes the speakers as "Headphones". But I don't think that really matters.
    Thanks for the help. I have sound now coming out of my external speakers.

  • No Sound Coming Out

    My ipod shows music playing but no sound is coming out.  What do I do?  I have tried resetting and it didn't work.

    I've got the same problem.. When i get a call i can hear but the other peson says i am muffled.. the sound only works if i plug in my head phones.
    When you go onto the ipod on your phone do you have the volume bar or not? because mines not there and i don't know how to get it back, i've recently updated it and i restored it aswell but its not working.. any suggestions?

  • Since I updated my iPhone on iOS 5, the sound coming out of the speakers and the headphones has gotten worse. Any idea how I can resolve this problem?

    I don't know what happened to it. I just updated it and now, the sound comes out tinny and overdriven. My setting were just as before, but the sound has become very crappy.
    Any solutions?

    You're pressed the volume switch top right side to go up ??
    If that doesn't help ...
    Press and hold the Sleep/Wake button and the Home button together for at least ten seconds, until the Apple logo appears.
    If that doesn't help, tap Settings > General > Reset > Reset All Settings
    Then try sound.

  • Buzzing Sound coming out from inside

    Hi HP Team, Please let me know how to contact/raise service request for my newly bought laptop on 25th July 2015. A low buzzing sound coming from motherboard within. Though computer is working fine, but the sound continues. The sound may be compared to that of a 'burning electric wire'. Regards, SOURAJEETKolkata,West BengalIndia

    Hello , Thank you for visiting the HP Forums! A great place where you can find solutions for your issues, with help from the community! I understand that you are looking to contact HP for a service request, and wanted to assist you! Please use the following http://www.hp.com/contacthp and create a case for your issue and contact HP. If you live outside the US/Canada, please click the link below to get the contact information for your region.
    http://www8.hp.com/us/en/contact-hp/ww-phone-assist.html Please let me know if this information was helpful by clicking the thumbs up below.
    Have a great day!

  • Rear left sound coming out of front left and ri

    Sound that should be coming out of the rear left speaker is being divided by the front 2 speakers. Anyone know whats going on? i'v tried reinstall windows vista, reinstalling the sound card, made it sure its not the speakers. So i have no idea whats going on.

    Hi @ellencat 
    Welcome to the HP Support Forums!
    I understand that you are getting sound both from your speakers and the headphones when the headphones/earplugs are plugged in.
    A fix to try is, to go into the Control panel
    then Hardware and Sound
    then click on Sound and select the Recording tab
    Select your microphone/headset as the default device, and press OK.
    Also you can look at this page from answers.microsoft.com, as if offers a few more suggestions.
    How prevent sound from playing through both headphones and speakers
    Malygris1
    I work on behalf of HP
    Please click Accept as Solution if you feel my post solved your issue, it will help others find the solution.
    Click Kudos Thumbs Up on the right to say “Thanks” for helping!

Maybe you are looking for

  • Trigger alert for file not existing in sender FTP server

    Hi all, I have a scenario file to file.In the sender FTP server a file is placed every 3hours.If file is present it will work in the normal file to file procedure.But when no file exists it should trigger an alert. Scripts on FTP server is not accept

  • Hide button save on page bsp hap_document.html

    Hello, Do you know if there is a way to hide the button 'save' in the appraisal document page ? There is a BADI ? Regards, Aurélien

  • Prepare List with text file fields

    Hi, This is rama krishna. I need to convert text file fields to a List. My requirement is to read a text file and prepare one list depending up on the fields. For example I want to read the following foollowing text fields into list(it may be list or

  • Eliminating null from result set

    Hi, How can i set some value (say 0) for fields having null value using ejbql? Anybody please help me.... Thanks in Advance, Anish.

  • JavaFX table view headers bug?

    Hi, I created simple application with table view and I have problem with the way that table view headers are displaying. When table view is not focused headers are improper width but when table get focus then headers width is changing and everything