G5 will not start-up after 10.4.4 update - HELP!

I updated to 10.4.4 restarted and BOOM!
I get an do not enter sign. My G5 will NOT START UP!
HELP!!
(using my G4 Powerbook now!)

I updated to 10.4.4 restarted and BOOM!
I get an do not enter sign. My G5 will NOT START UP!
Well, I'm currently updating my Quad as I write this on my laptop. So, in a few minutes I'll kniow whether or not my upgrade will be like all of the positive comments in another thread or like this single one.
I suppose you will need to startup the problem child with your original DVD and see if you can repair the offending start drive.
Keep us posted.
I'm off to my computer room to check the Quads status. Later.

Similar Messages

HT5654 My iphone 4 will not switch on after ios 7.2 update help i am disabled and must have my phone working

Help!! Iphone 4 updated todat to ios7.2 and it has crashed my phone.. cant do anything with it and am disabled.. i need this phone to work urgently. any help out there please?All i have is the apple logo ..nothing else

Thanks darren i called apple and they did me a reboot and update. luckily i have my phone backed up ti itunes so when it actually started to work, it was just a matter of time taken to restore it. Thanks .. hope you dont have the same probs with ios7 that i have had.

2007 Mac Book pro Shuts down at startup attempt. Tried reloading OSX and will not start up after that.

My Mac Book Pro started having issues. I tried to relaod the operating system and it worked for a moment. When I tried to do a time machine back up it failed.
Now itr Shuts down at startup attempt. Tried reloading OSX and will not start up after that.

Dr.Conga,
did you try to do a Time Machine backup from your MacBook Pro, or a Time Machine restoration to it?
Are you trying to reload your current version of OS X (10.7.4, to judge from your signature), or are you trying to reload the version of Mac OS X that came on the grey installation DVDs that originally came with your MacBook Pro?

TS2570 Mac will not start up after software up date, just screen with Apple logo and spinning icon?

Mac will not start up after software up date, just screen with Apple logo and spinning icon? I have tried safe start up, unplugged all other cables, no luck?

How to Perform an Archive and Install
An Archive and Install will NOT erase your hard drive, but you must have sufficient free space for a second OS X installation which could be from 3-9 GBs depending upon the version of OS X and selected installation options. The free space requirement is over and above normal free space requirements which should be at least 6-10 GBs. Read all the linked references carefully before proceeding.
1. Be sure to use Disk Utility first to repair the disk before performing the Archive and Install.
Repairing the Hard Drive and Permissions
Boot from your OS X Installer disc. After the installer loads select your language and click on the Continue button. When the menu bar appears select Disk Utility from the Installer menu (Utilities menu for Tiger, Leopard or Snow Leopard.) After DU loads select your hard drive entry (mfgr.'s ID and drive size) from the the left side list. In the DU status area you will see an entry for the S.M.A.R.T. status of the hard drive. If it does not say "Verified" then the hard drive is failing or failed. (SMART status is not reported on external Firewire or USB drives.) If the drive is "Verified" then select your OS X volume from the list on the left (sub-entry below the drive entry,) click on the First Aid tab, then click on the Repair Disk button. If DU reports any errors that have been fixed, then re-run Repair Disk until no errors are reported. If no errors are reported click on the Repair Permissions button. Wait until the operation completes, then quit DU and return to the installer. Now restart normally.
If DU reports errors it cannot fix, then you will need Disk Warrior and/or Tech Tool Pro to repair the drive. If you don't have either of them or if neither of them can fix the drive, then you will need to reformat the drive and reinstall OS X.
2. Do not proceed with an Archive and Install if DU reports errors it cannot fix. In that case use Disk Warrior and/or TechTool Pro to repair the hard drive. If neither can repair the drive, then you will have to erase the drive and reinstall from scratch.
3. Boot from your OS X Installer disc. After the installer loads select your language and click on the Continue button. When you reach the screen to select a destination drive click once on the destination drive then click on the Option button. Select the Archive and Install option. You have an option to preserve users and network preferences. Only select this option if you are sure you have no corrupted files in your user accounts. Otherwise leave this option unchecked. Click on the OK button and continue with the OS X Installation.
4. Upon completion of the Archive and Install you will have a Previous System Folder in the root directory. You should retain the PSF until you are sure you do not need to manually transfer any items from the PSF to your newly installed system.
5. After moving any items you want to keep from the PSF you should delete it. You can back it up if you prefer, but you must delete it from the hard drive.
6. You can now download a Combo Updater directly from Apple's download site to update your new system to the desired version as well as install any security or other updates. You can also do this using Software Update.

My MacBook Pro will not start up after entering correct password.

My MacBook Pro will not start up after entering password. Circle with an X in it and 'cancel' below it is on bottom of screen. When clicking on cancel, nothing happens. This just started last night.

Hi MJTOOTS,
Since you are getting to the login screen, it is booting past the "gray screen" phase, so try the steps in this article, like a Safe Boot.
Resolve startup issues and perform disk maintenance with Disk Utility and fsck
http://support.apple.com/kb/ts1417
You may also want to see if any of your Login Items are causing an issue.
OS X Mavericks: Open items automatically when you log in
http://support.apple.com/kb/PH14173
Thank you for visiting Apple Support Communities.
Nubz

My MBP will not start up after restart

My MBP (late 2011 running 10.8.something - receintly updated) will not start up after I had to do a restart to install Blackberry Desktop software (for my wife, I promise). It chimes, gets past the grey screen with the Apple logo and then just sits on the login screen but with the background only, no account or anything. My mouse pointer is there and moves but nothing else. Anyone have any idea?

Reboot holding the Shift key down on a wired or built in keyboard, this is Safe Mode and will disable the at boot kernel extension file that Blackberry installed.
When you get in uninstall the software using their uninstaller. Then reboot normally again, visit their website for a update if there is one.
Blackberry/RIM software has been causing issues around here lately.
If your machine refuses to boot normally again, then run through this list 1-8,, by #8 your machine should be booting normally again.
Step by Step to fix your Mac

My iPad4 will not turn on after i OS 6 update

My iPad4 will not turn on after i OS 6 update and it keep asking to connect to iTunes?

What to Do When Your iPad Won't Turn On
http://ipad.about.com/od/iPad_Troubleshooting/ss/What-To-Do-When-Your-Ipad-Wo-No t-Turn-On.htm
iOS: Not responding or does not turn on
http://support.apple.com/kb/TS3281
iPad Frozen? How to Force Quit an App, Reset or Restart Your iPad
http://ipadacademy.com/2010/11/ipad-frozen-how-to-force-quit-an-app-reset-or-res tart-your-ipad
iPad: Basic troubleshooting
http://support.apple.com/kb/TS3274
Update and restore alert messages on iPhone, iPad, and iPod touch
http://www.buybuyla.com/tech/view/012953a0d412000e.shtml
iOS: Resolving update and restore alert messages
http://support.apple.com/kb/TS1275
iPad: Unable to update or restore
http://support.apple.com/kb/ht4097
 Cheers, Tom

OSX will not start up after loading iTunes 5

Just down loaded and installed iTunes 5. OS 10.4 will not start, it hangs at the apple logo. Any suggestions?

Try booting into Single User Mode and run the File System Check. Then, if you can successfully boot up, run Disk Utility and repair disk permissions right away.
FSCK - File System Check
To start up in single-user mode
1. Restart the computer.
2. Immediately after the startup sound, press and hold both the Command (Apple) and "s" keys on your keyboard. The computer will display a series of text messages, at which time you may release these keys.
When the computer has started up, it will display a command line prompt (#). The computer is now in single-user mode.
How to Run the File System Check from the Command Line
Once you have reached a command line, follow these steps to use fsck:
1. At the prompt, type: fsck -fy (NOTE, there is a space between the k and the -)
The fsck utility will go through five "phases" and then return information about the disk's utilization and fragmentation. Once the check is finished, if no issue is found, you should see "** The volume <name of volume> appears to be OK."
If fsck alters, repairs, or fixes anything, it will display the message:
**** FILE SYSTEM WAS MODIFIED ***
IMPORTANT: If this message appears, repeat the "fsck -fy" command until this message no longer appears. It is not unusual for your computer to require several "passes" of fsck, because first-pass repairs may uncover additional errors. Run it until you get two consecutive times with an "OK" result.
3. When fsck reports that no problems were found, type: reboot
4. Press Return.
Hope this has been of some help. Good luck.
OT

Itunes will not start up after i downloaded it, itunes will not start up after i downloaded it

ok i have downloaded itunes 4 different times thinking it just didn't finish downloading . but still once more after i downloaded the software . it still will not start up when i click on the itunes . it gives me an error message about a apple support . and will not start up

it gives me an error message about a apple support
What's the precise text of that error message, please?

Imac will not start up after power outage

My iMac G5 will not turn on after the power went out. I can hear a clicking noise which seems to be coming from the fan/power supply area when it is plugged in. Nothing happens when the power button is pressed. Tried resetting PMU and still nothing. What do you think the problem could be? Bad power supply?
Thanks.
iMac G5 17" Mac OS X (10.4.9)

I just went through the steps of troubleshooting with an iMac that won't turn on using the led indicators with the back taken off, the first led light lights but it seems to blink very quickly (in unison with the clicking noise), does not stay solid. After pressing the SMU and then the internal power button, nothing happens again, and the 2nd led light does not light even momentarily. So it tells me that I need a new logic board...what kind of costs are we talking about here, anybody have a ballpark idea? Thanks for the help.
Pat

WDS service will not start Windows Server 2012 R2 with Update

Greetings,
After building my WSE box clean with new hardware and with Update version of WiSE 2012 R2, I find that it let me set up Windows Client Restore but now the WDS Service will not start for love nor money.
Any suggestions? Am I missing a Win-PE boot Image? Should I do something else?
Please assist,
Bob Hessenauer

All,
The problem was a conflict between DHCP and WDS. Followed the instructions in this article and all is now fine:
https://vkarthickeyan.wordpress.com/2013/05/21/wds-service-unable-to-start/
Just so you know,
Bob Hessenauer

IMac will not auto sleep after 10.5.7 update with Safari 4 Beta

I've noticed that my new iMac 24" will not automatically sleep after updating to 10.5.7. Actually, that's not completely true, I've just discovered that if Safari Beta 4 (latest update) is open the iMac will never sleep automatically, but that if Safari is not open, automatic sleep works perfectly as it always did with 10.5.6. I've repeated this test numerous times and it's always consistent. Anyone have any ideas how to solve this?

Sorry that I do not remember where I saw this, could be MacFixIt, but the advice that I saw for issues with the 10.5.7 delta that comes through Software Update for folks with 10.5.6, was to download and overlay the 10.5.7 Combo as Carolyn has suggested, and then to download and install the most recent beta for Safari 4.
Of course this is best done without multitasking while the installations are happening, as well as unplugging and shutting down all other processes; external attachments and even Bluetooth and Air Port. Prepare for the installs by rebooting to your Install DVD and use Disk Utility in the Utilities Menu to verify and repair any issues with your boot volume, followed by rebooting into your account and using DU in Apps/Utilities to Repair Disk Permissions before and after the installs.

I just "upgraded"????? to Lightroom CC, now it will not start on Windows 7. can someone help me?

I had Lightroom 5 and the creative cloud photographer bundle. upgraded (some joke) to Lightroom CC and no lightroom will not start on Windows 7. just dead in the water. any help?

The fix was to completely remove all Apple Software following guides in previous posts.
Then download and re-install latest iTunes 64-bit, making sure to Run As Administrator.
This fixed it. Now the next thing seems to be that as I move from one device to another to close and restart iTunes between each one. Treat it gently. It seems to break easily and a lot.

Mac will not START UP after software update. Help?

I just updated my 24" iMac to Snow Leopard and also put on the new iLife package. Everything was working fine, Then i tried to get onto the internet using my Bigpond wifi (usb stick) the software started fine and connected to the internet, but in safari no web page would load. so i clicked on the update software/firmware option for the bigpond wifi usb stick and after several minutes realised everything had frozen. nothing would respond.i held the power button down, it shut down. Now it will not power up. just sitting at the first white screen with the apple and rotating line dial. I have tried all of the stup options recommended iner manual and removed/replaced te ram. still no fix.. Can someone please help?

Try starting the Mac with the original DVD that came with the computer, then run disk utility and repair the hard drive also repair permissions. http://support.apple.com/kb/HT1782

My iMac will not start up after running on Yosemite since Beta 4

Hi!
I have successfully been running Yosemite since the Beta 4 on my late 2012 iMac (se spec below). But I did notice that the boot process delayed for some time after approx ⅓ of the progress line was passed.
Today it did not pass this point. I had it running overnight, but it would not start up in normal mode.
It does start in safe mode.
I have run diskrepair
I have unplugged all peripherals
I have run the Apple Diagnostics (or AHT), no problem there whatsoever.
Is there anything else I can do except reinstall Yosemite or go to an apple workshop for repair??

I have the same problem (and have posted it elsewhere) and I have already rolled the system back to Mavericks to keep working. That seems to be he only course open for now, but will leave us with an increasingly obsolete system and future problems with new/updated apps. Not only that, but my iMac has plummeted in value.
Faced with a £1000 12-month old iMac that can't be updated, I seem to have an expensive paperweight and am beginning to regret the unkind things I said about Microshaft.
A solution is still needed, and none seems to be forthcoming from Apple.

G5 will not start-up after 10.4.4 update - HELP!

Similar Messages

Maybe you are looking for