G5 wont boot from hard drive after install

ok, so i bought my G5 from the school i go to but under their confidential stuff they had to take the hard drive from the computer before they could sell it to me. i thought that would be just fine as i could just get a new hard drive to replace it. turns out im having much more trouble then i thought. the hard drive i am using is a 1Tb western digital WD10EALS (http://wdc.custhelp.com/cgi-bin/wdc.cfg/php/enduser/stdadp.php?p_faqid=1400&p_created=&p_pv=2.295&pprods=227%2C295). when i install the disk it boots from the leopard retail disk and it reads the hard drive just fine. i select it and it goes through the install successfully. upon rebooting though, i get the blinking folder with the question mark on it. a lot of the stuff i have read says you can go in through disk utility and partition the drive but i still have yet to see anything that says something about disk utility. when it asks where to install OS X it shows the 900 some Gb of my hard drive and when i hit options the only options it has are upgrade, archive and install, and erase and install. and when you do erase and install it gives you the option of doing "journal" format or "case sensitive, journal" format. i suspected jumper settings but when i read through the manual on the WD website it didnt seem to say anything about doing something specifically for apple. it had a jumper for slower transfer rate 1.5Gb/s one called SSC which i guess is for radio interference.
any help would make me super happy, i am a computer technician and the reason i bought this computer was to step up my apple game. but having some trouble right now. thanks for taking the time to read this!
Message was edited by: chubbs899

Hi chubbs899, and a warm welcome to the forums & Macdom!
i have read says you can go in through disk utility and partition the drive but i still have yet to see anything that says something about disk utility.
1. Insert the Mac OS X Install disc, then restart the computer while holding the C key.
2. When your computer finishes starting up from the disc, choose Disk Utility from the Installer menu. (In Mac OS X 10.4 or later, you must select your language first.)
*Important: Do not click Continue in the first screen of the Installer. If you do, you must restart from the disc again to access Disk Utility.*
How to format your disks...
http://www.kenstone.net/fcphomepage/partitioningtiger.html
Thanks to Pondini, Formatting,  Partitioning, Verifying,  and  Repairing  Disks...
http://web.me.com/pondini/AppleTips/DU.html
it gives you the option of doing "journal" format or "case sensitive, journal" format.
Don't use Case Sensitive, confuses many Apps.
i suspected jumper settings but when i read through the manual on the WD website it didnt seem to say anything about doing something specifically for apple. it had a jumper for slower transfer rate 1.5Gb/s
Yes, it needs that jumper on pins 5&6.

Similar Messages

  • DV7-6185us wont boot from hard drive.

    I recently installed a new hard drive after the one it came with completely crashed. After installation of new hard drives, I inserted and installed all of the recovery disks needed for the new hard drive. Upon completetion it said it needed a restart and after restart I get a message saying I need a OS for the hard drive for boot up.
    I went into my bios to make sure the hard drive was first in boot order which it is but when trying to pick where to put from on the bios screen it only give me the cd option. I ran a full diagnostic of the hard drive and everything checks out. I made sure to unplus the hard drive and tried a different slot and still get the same thing. Installation when fine but still won't boot from hard drive.
    Is there something that i'm missing? The hard drive is fine. So what could it be?

    Hi,
    Assuming this is just a problem with the recovery media, here's an alternative option you could try.
    Before trying the following, make sure you can still read the 25 Character Product Activation key on your Windows COA label ( 5 blocks of 5 alpha/numeric sets ).
    An example of a COA Label can be seen Here.
    You can create a Windows 7 installation disc yourself using another PC - just download the correct Disc Image ( this must be the same version that originally came with your notebook - this is listed as Windows 7 Home Premium ) from the link below and use an application such as ImgBurn to burn the ISO correctly to a blank DVD - a guide on using ImgBurn to write an ISO to a disc is Here.  These Images are clean and from a well-respected source - Digital River.
    Windows 7 Images.
    Use the disc to perform the installation, enter the Windows activation key found on the COA Label when requested and when the installation has completed, use the 'Phone Method' detailed in the link below to activate the OS - this method supported by Microsoft and is popular with people who just want a clean installation of Windows 7 without the additional software load normally bundled with OEM installations.
    http://www.kodyaz.com/articles/how-to-activate-windows-7-by-phone.aspx
    Any additional drivers and software you may need can be found Here.
    Regards,
    DP-K
    ****Click the White thumb to say thanks****
    ****Please mark Accept As Solution if it solves your problem****
    ****I don't work for HP****
    Microsoft MVP - Windows Experience

  • My Mac Pro flashes the question mark and wont boot from hard drive, flash, or Cd... Please help!

    My Computer froze so I shut it down... When I tryed to boot up again it wouldn't power up.  After a few tweeks I got it to power up but now it wont boot from the hard drive, flash drive or a cd.  It want to start, then, after a few seconds it stops.  Not sher what to do.  Can anyone help?

    Have you tried Safe Boot?
    You also might reset PRAM and reset SMC.
    Have you tried booting with the Recovery System? See its possibilities here.
    From there you can make repairs to your primary startup partition.
    Do you have a backup? If not, do you have an external drive large enough to back up your primary drive? It would be good to have one in case your drive needs repair or replacement.

  • Unable to boot from hard drive or install dvd

    Out of the the blue my powerbook won't boot up. I've tried to reset the PRAM, I've tried to verbose thing but all it said was that it couldn't establish a connection to the windowserver. I've even tried to power on holding the option key but the hard drive and install dvd both have x's on them. What can I do to get this thing working again?

    Have you tried rebooting in safe mode? Failing that, have you tried rebooting from the install disc so you can run Disk Repair? For either of these tests, insert your system disc and follow the instructions here: http://support.apple.com/kb/TS1417
    Good luck!

  • K8M Neo-V won't boot from hard drive after BIOS flash

    But it boots just fine from CD or floppy.
    I bought the combo (MB, AMD64 processor, 1G memory) to replace a
    motherboard which had died in a previously working system.  At the
    same time I replaced the power supply and the video card. When I first
    fired it up, it brought up the boot manager from the previous incarnation
    of the system, which had been an Athlon-XP.
    I never actually let it reboot, since I wanted to redo the OS optimized
    for the AMD64 (and the new video card.)  I flashed the motherboard to the
    most current version of the BIOS (AMI version 3.5), booted from CD and
    installed the OS.  Once I got to the point of being able to boot from the
    new system, I removed the CD and proceeded to reboot.
    It displayed all the possible boot devices (note that the floppy and CD
    were empty):
      Searching for Boot Record from floppy..not found
      Searching for Boot Record from CD/DVD..not found
      Searching for Boot Record from IDE-0..not found
    No matter what I did, I couldn't get the system to boot from the hard
    drive.  I reflashed the BIOS back to 3.2, still didn't work.  Since then I
    have installed four different operating systems:  Win2k, WinXP, Gentoo
    Linux and Debian Linux.  All boot from CD, install perfectly until you get
    to the part where the system has to boot on its own, and then nothing.
    Has anyone seen this?  Is it possible that there is a problem with how
    I've set the BIOS up?  Or a hardware conflict with something else?  Or
    just a bad MB?
    Thanks for any advice.
    Steve

    Notihng special in the BIOS drive setup.  Everything is auto-detected and I've pretty much left those settings alone.  At the time of the first flash I probably *did* have SMART enabled.  Once I started having trouble I turned that off, and have never turned it back on.
    Boot order has been changed multiple times.  Right now it is floppy -> cd -> ide-0.  I've turned the network boot option off and on again (not that there's a boot server handy...)  I've tried hitting F11 to choose my boot device and specifically selected the HD.  Hasn't made any difference.
    I generally turn virus protection off the moment I get a new motherboard.  I'm pretty sure it came disbaled by default, if not I'm sure I disabled it.  Even had it been on, though, any boot block corruption would have to be permanent damage to act like it has, since four subsequent OS installs should have overwritten the boot block four times over.
    It might be worth my time to drop a different HD in the primary master slot and see if it can boot from that.  I'll be real unhappy if I've toasted a perfectly good drive.

  • Macbook Wont boot from hard drive. Help??

    I was typing on my Macbook and the whole computer just froze with the rainbow wheel. So i hold down the power button to force a shut down. When i try to boot it back up it game me a Apple logo but then turn into a X. I try to turn it on holding down the Option key and only the recovery HD came up. Then i try to install Osx onto the Hard drive and it wont recognize it. Then i went to disk utility and The HD is Grey out then i Try Repair Disk but it doesnt work and gives me errors. Then i plug in a different Hard Drive and it Boot Up fine so i know its not the computer its the hard drive issue. Btw i used a software to recover the files and everthing showed up so the content is still there but the software cost $99 to use and im not paying that much. Does anyone know how to solve this Issue? I have important files on it. If the hard drive is dead then is there any free software that i can use to recover the files?

    Since you were able to read at least some of the files, I'm thinking you may have an issue with the SATA cable, which is fairly common. The easy test is to pull the hard drive and put it in an external enclosure. If it works, the SATA cable is probably the issue.
    Is it a 13 or 15 inch?

  • Mac will not boot from hard drive or install disc

    Hello All
    In dire need of advise...my intel Mac will not boot, even tried booting to the Snow Leopard install disc and all I'm getting is the white screen, apple logo and the wheel.
    Just before this happened there was a buzzing sound like the fan was about to fail but that is only a guess on my part. Is there a keyboard shortcut to boot to a terminal window or similar to force the computer to boot from the install disc.
    Thanks in advance for any help offered.
    Warren

    Hi Warren
    Try holding the Option key and see if it will boot into Startup Manager, where you should be able to choose from a good Drive or your install Disk.
    http://support.apple.com/kb/HT1533
    or the D key and run the Apple Hardware Test.
    http://support.apple.com/kb/HT1509
    Also note: key commands may require a USB Keyboard if your using a wireless and it has become unpaired.
    Dennis

  • PowerBook G4 1.33 wont boot from DVD drive after upgrade

    Can anyone offer some assitance. I just upgraded my PowerBook G4 1.33 from a Combo Drive to a Panasonic SuperDrive. Also upgraded to a 250GB harddrive. Got a tree error on HD and when I went to boot up Diskwarrior I could not boot from the DVD drive. It does not come up as a bootable drive. Tried Holding down "C" key "Option Key" nothing works. Can anyone tell me what's wrong? All other drive functions work perfectly.

    Hi chubbs899, and a warm welcome to the forums & Macdom!
    i have read says you can go in through disk utility and partition the drive but i still have yet to see anything that says something about disk utility.
    1. Insert the Mac OS X Install disc, then restart the computer while holding the C key.
    2. When your computer finishes starting up from the disc, choose Disk Utility from the Installer menu. (In Mac OS X 10.4 or later, you must select your language first.)
    *Important: Do not click Continue in the first screen of the Installer. If you do, you must restart from the disc again to access Disk Utility.*
    How to format your disks...
    http://www.kenstone.net/fcphomepage/partitioningtiger.html
    Thanks to Pondini, Formatting,  Partitioning, Verifying,  and  Repairing  Disks...
    http://web.me.com/pondini/AppleTips/DU.html
    it gives you the option of doing "journal" format or "case sensitive, journal" format.
    Don't use Case Sensitive, confuses many Apps.
    i suspected jumper settings but when i read through the manual on the WD website it didnt seem to say anything about doing something specifically for apple. it had a jumper for slower transfer rate 1.5Gb/s
    Yes, it needs that jumper on pins 5&6.

  • V120 server boot from hard drive freezes

    Hi
    I just installed open solaris build 75 on a sun v120 server. After the instalation all went well and I configured the processes and users on the server just like I did yesterday on another v120. What i did afterwards that was different from yesterday is that I put the machine on standby by holding the power off (0) switch for a few seconds, then unpluged the power chord. After turning the power on again the server will freeze the boot process in the first 2 steps after it tries booting from hard drive. (It does pass all hardware checks). To comunicate with the server I connect a windows PC on the lom port with serial cable and the SecureCRT software. I tried to break into lom with #. after poweron but it doesn't seem to work. And the lom console in standby wont let me boot from cdrom or anything while in standby. Can anyone give me some guidance here? I don't have much experience with this kind of hardware.

    Well, LOL,  I did that prior to buying the software. It does meet the specifications. I found the solution on the support site. When I googled before I hadn't googled the error message verbatim. Doing so led me to this page: http://support.apple.com/kb/TS3926 where I was instructed to create a tiny partition (128MB) and then run the installer again. No explanation was given as to why, but this did work and I am typing this via the new OS. Thanks for trying to help me baltwo! Best regards.

  • How come my mac isnt showing my external hard drive after installing os x maverick? and how to i fix that??

    how come my mac isnt showing my external hard drive after installing os x maverick? and how to i fix that??

    How do you mean it isn't showing the external drive?  If you mean on the desktop, click Finder on the menu bar, Preferences, General and check the boxes for Show these items on the desktop - make sure hard drives is checked.
    If you mean it is not showing in Finder or Disk Utility, make sure it is turned on, reboot and see if that mounts it so it shows up.

  • Powerbook won't boot from hard drive or restore disk

    I've looked through some of the older posts here and none of them exactly matches my problem, and I've tried just about any possible solution I can think of.
    I recently noticed that my PowerBook was acting a bit strange. It was making more fan noises than usual, and sometimes the computer would make the very last noise it makes as it shuts down (which is the hard drive coming to rest, I suppose?), though the computer would still be running. Then, yesterday the computer froze and I hit command-control-power, and when the computer restarted it gave me a folder icon blinking between a question mark and the Mac logo.
    I tried restarting again, but I had no luck. Now when I try to start up I get the start-up chime, then I get one of three things:
    1) If I restart it without a CD in the drive, I get the blinking folder.
    2) If I restart it with the Software Restore and Install DVD in (but without holding down the C key), it gets to the Apple logo and shows the spinning pinwheel or whatever you want to call it, then freezes and some nasty horizontal bars pop across the screen.
    3) If I restart it with the Restore & Install DVD in and I hold down the C key, it gives me the Apple logo, then the "Your computer has encountered a problem and needs to be restarted" box pops up.
    I tried zapping the PRAM--no luck. I tried Open Firmware; the screen pops up, then I type in "mac-boot" and I get the same thing as in #2 above.
    I used the Hardware Test CD; it told me that there was a Mass Storage error with the error code 2STF/1/4. That doesn't sound too pleasant.
    I'm not sure what caused it; perhaps it was a heat thing, but I moved it too a different surface. All the hardware is original except for the Airport card, which has worked fine since Christmas. The only recent software changes I've made were updating to the newest versions of iTunes and Firefox. It doesn't seem like a hard drive problem, since the boot CD won't work.
    Am I doomed to sending Apple a couple hundred bucks to fix this? The laptop is right at three years old, so even if I'd had AppleCare it would be expiring right about now. Or is it time to buy one of those MacBooks? Or just buy a couple PC's and use each one till it breaks, then throw it out?
    Thanks,
    Kevin

    I finally got to another Mac. I installed Mac OS X onto my Firewire drive, then hooked up the drive to my Powerbook and used the Startup Manager. The drive showed up on Startup Manager and I chose to boot from it. When I did, the startup process continued briefly, then froze just like it does when I try to boot from the CD.
    I know my Powerbook's hard drive is shot, and to be honest, I'm fine with that--there isn't any critical, essential data on there. I tried starting the Powerbook up in Target Disk mode, but that doesn't work either--I hear the chime, press T, but the screen stays black.
    Now my question is: can I rip the hard drive out? Or do I have not only a bad hard drive, but also something else gone wrong? I'm not opposed to buying a new internal hard drive and installing it myself if that will fix the problem; what I don't want to do is spend a few hundred bucks to take it to someone who's only going to tell me that my omputer is now a paperweight.
    Also, my Powerbook isn't one of the ones with a recalled battery. The computer can get pretty hot, even when sitting on a desk, but I just figured that was normal.
    Thanks,
    Kevin

  • T400 problem booting from hard driver, cursor blinking on top left screen corner

    I'm having problems with T400 (2765-TDG). It has trouble with booting, which requires 5 minutes power off/on in order to propely boot operating system.
    Notebook is less than two months old, fully properly driver updated then so after that nothing is been done on it neither from user or from system administrator.Problem occured suddenly after two weeks of mentioned maintenance.
    Symptoms:
    After mouse intialization, screen goes black, and on top left corner white cursor blinks
    There is no keyb key which can contine booting process, expect rebooting
    There is no other device connected to notebook, not even mouse
    It's needed several, sometimes 3-4, sometimes even 10, times to reboot with power key in order to get operating system booting
    When it suceeds booting, just before booting operating system, in diagnostic mode of booting (with quick boot disabled) I can hear only one beep
     What I tried to do:
    I've changed BIOS setting to force booting only from hard drive, turned off any other booting device.
    Also, changed from AHCI to Compatibility mode for hard disk but with no help.
    Turned off quick boot, but during booting process, there is no specific error shown
    Upgraded BIOS version to 2.03-1.01 but with no help
    Restored BIOS default setup, no help
    Did some general diagnostics, and here is what I've noticed:
    After changing settings in BIOS, save&exit, computer hangs with black screen. I have to turn it off and back on in order to continue booting. Settings in BIOS are saved properly.
    When I succeed with booting into operating system (XP), graphic card sometimes is not recognized, not even by original driver installation. In device manager, I see two recognized graphic card drivers with warning sign, and "Intel management engine interface" device with warning sign
    In event viewer, then only error line is "Problem with HECI driver communicating with firmware" or something like that
    Operating system is not able to enter in standby mode, it justshows blank screen and I'm forced to switch off notebook by pressing power off button for longer time
    Any help appreciated. Thanks! I hope I can deal with this before I send notebook to authorized service.
    Vedran
    Solved!
    Go to Solution.

    I'm sorry to tell you, but in may case, I had to send notebook to authorized service provider. They replaced mainboard and hard drive (!?). Now everything works fine, but puts shame on Thinkpad T series notebook.

  • No Hard Drive after installing Leopard

    Hi, i just installed leopard on my macbook and everything went very well until i turn it off and then turn it on again. It just popped a kernel panic screen, just after de main grey screen with the apple logo on it. So I try to reset the PRAM and doesn´t work, and I am stuck like in the middle of nowhere because apparently I have no hard drive to install leopard.
    I try to verify the disk with disk utility but nothing happens, so I try to reinstall leopard and guess what, I have no hard drive to chose for installation.
    What can I do? Thanks in advance

    hey, my hard drive died recently and i don't think it had anything to do with leopard either. you might want to check what kind of hard drive you have because a certain type of seagate hard drives that are installed in mac computers are defective and can crash at any time. i would check out this website and see if this might be your problem...
    http://www.appleinsider.com/articles/07/11/27/appleaware_some_macbooks_contain_flawed_seagatedrives.html

  • Setting T61 to boot from cd drive to install OS

    My problem started with my T61 getting a BSOD midway through loading windows and then progressed slowly into the hard drive's data getting completely corrupted and it being... well, for all intents and purposes empty.
    I have a windows XP install disc and want to boot form the disc, to format the hard drive and install a fresh XP install.
    I can't do that, however, since the BIOS won't allow me to make any changes to boot priority )or anything at all for that matter.
    I turn the computer on, with the CD inside and all I get is a black screen with a flashing underscore in the top left corner.
    I am away on vacation right now (and for a month) so I can't get to a lenovo tech support center or anything.
    Any advice?
    Solved!
    Go to Solution.

    orangedino,
    I'm sorry; George's advice  is the only solution. As this subject is not allowed to be discussed here as stated in the forum rules - Thread locked
    No posts shall include instructions or directions intended to subvert security measures, including passwords, locking mechanisms, fingerprint scans, etc, nor shall any posts provide descriptions to the location of, nor direct links to content related to these topics.
    Thanks for understanding
    Andy  ______________________________________
    Please remember to come back and mark the post that you feel solved your question as the solution, it earns the member + points
    Did you find a post helpfull? You can thank the member by clicking on the star to the left awarding them Kudos Please add your type, model number and OS to your signature, it helps to help you. Forum Search Option T430 2347-G7U W8 x64, Yoga 10 HD+, Tablet 1838-2BG, T61p 6460-67G W7 x64, T43p 2668-G2G XP, T23 2647-9LG XP, plus a few more. FYI Unsolicited Personal Messages will be ignored.
      Deutsche Community     Comunidad en Español    English Community Русскоязычное Сообщество
    PepperonI blog 

  • Cannot boot from ext drive after 10.5.2 update

    I followed the procedure in tech article 306502 for creating and updating a bootable drive. I am in a PPC Mini environment. External drive is LaCie 160 GB rugged firewire portable with auxiliary power, I created the drive with 10.5.1 and it booted nicely to my two Minis (running 10.3.9 and 10.5.1). I then updated the external system with 10.5.2 from the Apple site and now it does not boot. Sits and spins with a white screen, grey apple, and whirligig. Whirled for 1/2 hour and tried deveral times.
    I see this is not uncommon, but there have been no cures posted. One post suggested Disk Warrior. What would I do to with DW to move this problem forward. This is quite annoying, as I rely on being able to move around and boot from this drive when needed.
    Thanks for any help.
    Fred

    after 10.5.2 two days ago, mine booted up regularly. however after the additional leopard graphics update last night, it no longer boots up at all. i have to usethis ****** vista to report the problem. my macbook is right beside me, with nothing but a plain blue screen. occasionaly the mouse cursor appears for about 30 seconds, then dissapears and the screen remains blue. what can i do? if i cant log in apple cant update my mac!!! help!!!

Maybe you are looking for