[G50-45] stereo mix and mic

I was able to get stereo mix working on my G50-45 with conexant smartaudio HD card using instructions found here . The issue i have is that while it picks up sound files playing on my computer it wont pick up the microphone. If I disable stereo mix and choose mic as default recording device it works fine. Any ideas on how to get stereo mix and mic working at same time?
Moderator comment: Subject edit. Model added.

Hi curiousgeorge,
Welcome to Lenovo Community Forums!
Try setting it up as the Stereo mix is the default Recording Device but do not disable the the MIC.
Rightclick on the Mic and select properties, go to Listen TAB, place a check under Listen to this device and select the speaker or Headphone as default playback.
Try this and see if that works.
Regards
Solid Cruver

Similar Messages

Stereo mix and mic

hi guys need help regarding Realtek HD audio driver
I wana play stereo mix music and sing in my mic at the same time.... not for recording purposes but in chatroom lets say.
Im using XP...Toshiba Satellite s4747 laptop
In the Realtek software under "realtek HD audio input" i have mic and stereo mix both.... but i can only select one at a time.....
any solutions plzzz thxxxx
On a different note.... a friend of mine whose using a Compaq laptop with win XP has an older version of the realtek audio driver and can select both mic and stereo mix at the same time... i downloaded that version into my laptop but i still can only select one at a time....

Satellite A215-S4747
You can't turn on both the speakers and the mic at the same time? Try this.
Dig down through Control Panel > Sound > Playback tab > select the speaker(s) > Properties button > Levels tab. Click the Mic button to unmute it.
If you don't have the Mic button, you're out of luck.
-Jerry

Stereo Mix and Audition CC

So I know there are a couple threads floating around talking about Stereo Mix and recording What You Hear issues that have been going on now for quite a while. I think my issue is slightly different. My company has recently switched from CS5 (using Soundbooth) to CC (which uses Audition). When using Soundbooth I had no problem setting up, recording and playing audio captured through Stereo mix. For some reason in Audition, this seems to be impossible. No hardware changes were made.
Windows7
Realtek Audio Driver: 6.0.1.6602
Any advice?

This shouldn't be anything to do with Auditiion which simply records what the sound card (and associated software) in your computer hands it. If your sound card offers "Stereo Mix:" (or What U Hear or any of the other names used over the years) then Audition will record it. If Stereo Mix isn't available on your Windows audio recording panel then you're out of luck. The problem most of us have is that, under pressure from the RIAA, Microsoft and the computer manufacturers have dropped support for this from the OS.
Were there any other system changes when you upgraded to Audition CC? An upgrade from XP or Vista to Windows 7 for example?
If not, then it should still be there. Go to the Recording control panel in Windows and select Stereo mix as your default source. If you don't see it offered, right click on the white area of the control panel (i.e. away from any existing source) and put a tick next to both "show diabled devices:" and "show disconnected devices". If Stereo mix is now shown, select it as default.
After this, in Audition, go to Edit/Preferences/Audio Hardware Setup. Select MME as the device type and Stereo mix as your Default input here too.
This should do it...but it all depends on Stereo Mix appearing on that Windows list. If it doesn't, then there's nothing you can do about it except maybe buy something like Virtual Audio Cable--but the change wasn't in Soundbooth/Audition. Somehow your Windows installation was altered.

How get Stereo Mix on Conexant Toshiba L645

Hello I am using the laptop l645 stereo mix and I need some work. I have tried to follow but still no results. Ad can help with team view is not. And here is a picture that I get . Thank's

Reinstalling the Audio driver can usually solve the nexxing audio / mic problems frequenlty arising in Windows 7 and Win H8te.
You don't have to remove the existing audio package, some insist it makes a difference but going directly to the drive download and successful installation won't be impacted whether you remove the existing driver or retrample over the broken one
Your model's latest driver is provided at Toshiba's page:
page
http://support.toshiba.com/support/modelHome?freeText=2860979
Driver for those who entrust strangers with their families:
http://cdgenp01.csd.toshiba.com/content/support/downloads/tc70086800d.exe

Satellite L750-170 Windows 7 Stereo Mix Not Appearing

Hi,
I've been looking for ages on how to enable my Stereo Mix and I just can't get it up...
I've installed the latest driver for my 'Conexant SmartAudio HD', clicked the 'Show Disabled Devices' and the 'Show Disconnected Devices' and I still end up with no Stereo Mix showing. I've got Stereo Mix on my XP, Vista and my other Windows 7 PC before and I really don't know why it won't work on this.
Please Help!!
Thanks

*I found a solution!*
Stereo Mix is a sound device for recording music from you computer.
It is very useful for marketing purpose.
However, it is usually missing in most Toshiba computers.
Here is how to get it back.
This solution worked for my Satellite L750.
- Download the latest Conexant SmartAudio driver for your laptop downloadable at http://support.toshiba.com/.
- Create a new folder (I created one on my Desktop) for the driver and extract the zipped driver files to it with WinRAR.
- You should find a couple folders. Browse through them until you find the folder labeled W7-64/ W7-32, depending on whether you are using 32-bit or 64-bit.
There will be a .inf file inside. There should only be one file with that extension. Open it in Notepad.
- Now search in notepad until you find this section:
;HKR,%EPattributePath%\EpSettings\PcBeepCtrlEnable ,Enable,1,01
;HKR,%EPattributePath%\EpSettings\PcBeepCtrlEnable ,EPname,1,01
;HKR,%EPattributePath%\EpSettings\PcBeepCtrlEnable ,DefGainSettings,1,00,07,00,07
;HKR,%EPattributePath%\EpSettings\PcBeepCtrlEnable ,MuteGainSettings,1,00,00
;HKR,%EPattributePath%\EpSettings\PcBeepCtrlEnable ,Flags,1,00
;HKR,%EPattributePath%\EpSettings\StereoMixEnable, Enable,1,01
;HKR,%EPattributePath%\EpSettings\StereoMixEnable, MixAssocSeq,1,E0,E0
;HKR,%EPattributePath%\EpSettings\StereoMixEnable, MuteGainSettings,1,00,00
Note the semi-colons in front of each line. Remove all the semi-colons so the 8 lines above read like this:
HKR,%EPattributePath%\EpSettings\PcBeepCtrlEnable, Enable,1,01
HKR,%EPattributePath%\EpSettings\PcBeepCtrlEnable, EPname,1,01
HKR,%EPattributePath%\EpSettings\PcBeepCtrlEnable, DefGainSettings,1,00,07,00,07
HKR,%EPattributePath%\EpSettings\PcBeepCtrlEnable, MuteGainSettings,1,00,00
HKR,%EPattributePath%\EpSettings\PcBeepCtrlEnable, Flags,1,00
HKR,%EPattributePath%\EpSettings\StereoMixEnable,E nable,1,01
HKR,%EPattributePath%\EpSettings\StereoMixEnable,M ixAssocSeq,1,E0,E0
HKR,%EPattributePath%\EpSettings\StereoMixEnable,M uteGainSettings,1,00,00
Now cick "File" and "Save".
- Then go to Control Panel, Sounds and Hardware, Device Manager, Sound, Video, and Game Controllers, and right click on Conexant Smart Audio HD, select Update Driver Software.
- Then go to Browse My Computer for Software, Let Me Pick From A List, Have Disk, and navigate to the .inf file (the one you edited in Notepad) in the folder on your desktop.
- It should tell you it is no longer digitally signed and might harm your computer. Install it anyways.
- Now open up your Sound tray. If you go to the "Recording" tab, and make sure "Show Disabled Devices" and "Show Disconnected Devices" are both checkmarked.
- Now you should have Stereo Mix. Right click on it and select "Enable".

HELP HELP H ELP HELP NO "Stereo Mix"

This computer is less than two months old its bizzare why dont i have stereo mix or stereo wave, ive tried everything download this download that, nothing is working, its doing my frigen head in cant find a solution i have been spending weeks on end on this topic as i need this to record video with cam studio, surley my comp must have somthing

Here is what you should do ...I assume you have Windows Vista...
Go the Control Panel --> "Hardware and Sound" ---> "Sound".
        Or if you prefer the Classic View layout of Control panel... just doubleclick on "Sound"
Go to the Recording Tab and right click somewhere inside the box and check "Show disabled devices" and "Show disconnected devices"
         Stereo Mix will appear as an option now.
Choose Stereo mix and press properties.
         Where it says "Device usage" put "use this device (enable)" then Apply and OK
Now Select Stero Mix and press the "set default" button
Next step is to disable the microphone. Select it ... press properties ... and choose at device usage: Don't use this device (disable) ... apply ok and you are done.
Hope it works for you.

How to play stereo mix music and sing in my mic at the same time?

Hi guys, need help regarding Realtek HD audio driver
I want to play stereo mix music and sing in my mic at the same time.... not for recording purposes but in chatroom let's say.
I'm using XP...Toshiba Satellite S4747 laptop
In the Realtek software under " Realtek HD audio input" I have mic and stereo mix both.... but I can only select one at a time.....
Any solutions plzzz thxxxx
On a different note.... a friend of mine whose using one non-Toshiba laptop with win XP has an older version of the Realtek audio driver and can select both mic and stereo mix at the same time... I downloaded that version into my laptop but I still can only select one at a time....

Check the audio settings in Windows and dont forget in Realtek HD audio manager. You can find it in control panel.
I think your microphone is set to mute so check this.

Trying to record Stereo Mix with a monitor through my headphones. Using Screenium to record Audio and Video, using Avid MBox Mini with MXL 909 Microphone for the audio through the interface.

Basically, what I am trying to do is this:
Record my screen through Screeenium, record my voice as audio through an Avid MBox Mini (interface) with a MXL 909 microphone to pick up the audio. I have all that figured out. I'm able to efficiently record my audio and screenplay through these instruments and programs. What I am having trouble with is the stereo mix. I am running into a slew of problems here... My goal: Add on the audio of a game that I am playing (for example, Amneisia) so that the audio for my game will be picked up internally, and not through the speakers to be recorded through the microphone. I want there to be no external sound except me talking into my microphone. I also want to be able to HEAR the audio of the game through my headphones (and if possible, myself as well, through a monitor maybe?)
Problems I have run into so far:
-Haven't gotten it to pick up in game audio at all while using headphone. Can't figure this out
-Downloaded soundflower, have the output as soundflower. Not picking up anything, will put all my sound and midi settings at the end.
-When I do record through my microphone, it is only picking up a single channel (left earpiece only, no right channel)
-I have figured out it is NOT the equipment, I use Pro Tools and am able to pick up both channels with my mic, recorded a few tests. It's settings and I can't figure it out
-Trying not to run 16 million programs while running the game, will cause lag.
Summed up:
Trying to record:
-Audio from gameplay of any game I am playing through alternative route of speakers (do NOT want to record game audio through speakers, internally)
-Record voice through Avid MBox Mini and MXL 909 microphone.
-Record screen gameplay through Screenium
I followed a guide that told me to achieve "stereo mix'' I need to download soundflower and follow "X" steps. That is done and these are my current settings:
Audio Midi Setup - Stereo Mix custom Aggregate Device, Soundflower (2ch) selected, Avid Mbox Mini selected, Soundflower Output #1 has 2 channels (1-2), using Avid MBox mini for "Input" in order to record. Using Soundflower AND Avid MBox mini as "Output" in order to hear the sounds and replay game sounds (could be the problem? Maybe?)
Sound Settings - Output Stereo Mix (custom channel) Input Avid MBox Mini (recording)
I'm hoping this isn't too hard to understand.. I'm VERY bad at explaining information regarding computers.. It's hard becuase I don't understand it. I can clarify anything that I am able to, so any help on finding certain things would be greatly appreciated.
My computer: Macbook Pro MAC OS X Lion (11G63) 10.7.5 2.4 GHz Intel Core i7 4GB 13333 MGz DDR3 (If any of this is imporant)

Hey guys,
I tried to do some research and it looks like you need to have an external device and its drivers, such as an external microphone, installed on the computer to record audio that can be saved as a sound file. Another Suggestion is to try an auxiliary spliter for your headphones and external speakers?
What software are you using to record your game?
If anyone knows anything different, please let me know.
Thank you for being a part of the Lenovo Family,
Catie
Did someone help you today? Press the star on the left to thank them with a Kudo!
If you find a post helpful and it answers your question, please mark it as an "Accepted Solution"! This will help the rest of the Community with similar issues identify the verified solution and benefit from it.
Donate KUDOS and Click "Accepted Solution"

I have a hp hpe-595a, i'm trying to use stereo mix with a hot mic. anyone know how to do this?

I'm trying to sing along with the music in the chat program Paltalk and also host a music room on the same program, I can only use the mic or stereo mix but not both at the same time.
I have been using this chat program for over 5yrs and have always been able to use Stereo mix with the mic active, using the realteck codecs or soundblaster (what you hear)
I can't do this with the IDT codecs supplied.

Hey Redritr,
Thanks for the question. iTunes purchases are billed to Store Credits first, before Credit Cards, as outlined by the following article:
When making purchases, content credits are used first, followed by Gift Certificate, iTunes Card, or Allowance Account credits; your credit card or PayPal account is then charged for any remaining balance.
via iTunes Store: How iTunes Store purchases are billed
http://support.apple.com/kb/HT5582
It also may be that the iTunes Store is prompting to verify your billing information:
When there is a mismatch between the iTunes Store's records and your credit card company's records, you will receive an error message stating that your credit card's security code isn't valid or that your zip code does not match your bank's records.
In most cases, this issue is caused by a formatting error in the billing address that you have provided. You can correct the issue by verifying that the information you have provided is correct, or by changing the format of your address to match the format that your credit card company has on file.
via iTunes Store: My credit card's security code or zip code does not match my bank's records
http://support.apple.com/kb/TS1646
Additional Information:
Why can’t I select None when I edit my payment information?
http://support.apple.com/kb/TS5366
Thanks,
Matt M.

Does Apple make/sell the new "Apple In-Ear Headphones with Remote and Mic" with a one sided configuration? So that a person that is deaf in one can hear both sides of a stereo recording? Also, since the "other" bud is not necessary/useful...it's removed.

Does Apple make/sell the new "Apple In-Ear Headphones with Remote and Mic" with a one sided configuration? So that a person that is deaf in one can hear both sides of a stereo recording? Also, since the "other" bud is not necessary/useful...it's removed.

As far as I know, Apple sells no such configuration. However, under Settings > General > Accessability, there is an option to play back audio in monoural mode, which would then play both halves of a stereo mix in each earbud.
Hope that helps.

Flash Player Chrome 11.1.700.225 - Default Mic - Stereo mix like default

Hi again!
If you computer have stereo mix option, and don´t change mic selection, "Default" is as default. But didn´t take the microphone like default, it taken like stereo mix. And when users try to rec theirs voices there isn't any errors, but didn't rec anything.
If you try this with Firefox or Internet Explorer, "Default" doesn´t exist, and Flash Player displayed microphone correctly and work correctly.
Could you give us a solution?
Thanks!. Best regards,
Jose Ramon Leon Somovilla

What files are in C:\Windows\SysWOW64\Macromed\Flash after the clean install?
What is the contents of the FlashInstall file?

Using Both A Microphone and Stereo Mix Input In Audition

Hello,
I'm attempting to record a radio show..
Running Vista.... And using Adobe Audition 3. I am trying to use a stereo mix input (which I know is visible and can use) along with a microphone input (I have a sm57 mic, which is also activated and working).
However, it only gives me the ability to use one at a time when I go to multi track.
Any ideas?
~Thanks

That's all Microsoft's 'mixer' does for anybody; you can only select a single input to record from. The best solution in your case is to use a small, cheap external mixer instead. This has the added advantage of giving you some immediate physical control of what you are doing as well.

Is there any Sound card 5.1 include stereo mix that working with MacBook Air such as Creative Labs SoundBlaster X-Fi Surround 5.1 Pro Entertainment System ? and if there any another sound card can you tell me what is it please ? Thank you.

Is there any Sound card 5.1 include stereo mix that working with MacBook Air such as Creative Labs SoundBlaster X-Fi Surround 5.1 Pro Entertainment System ? and if there any another sound card can you tell me what is it please ? Thank you.

Okay, I did my best searching and I couldn't find anything that matched all your descriptors. I did do a search on both decoder numbers. SB0256 returned very little results, but with SB0466, I was able to find this ebay listing:
http://cgi.ebay.com/ws/eBayISAPI.dll...6_fvi%3D&_rdc=
This card isn't a Champion like you suggested. And with my complete lack of knowledge, I don't know what I/O dri've bay means. But since it is PCI and the decoder matches the number you gave me, this card should be adequete, right?
Whether it works or not, my search indicated it might be very hard for me to find that card (or any PCI card for that matter). Everything I saw was out of stock. I know this is a forum for Creative, but are there any other manufacturers that will allow me to accomplish my goal, either with current cards, or discontinued cards? Thanks again
Oh, and I will vote on that thread. I probably won't wait for them to release the decoder since I need it now, but I still believe Creative should be giving the customer what they want

I have a macbook pro in which i use for church recordings. it has a built in mic so like one hole for headphones and mic. how do i get it to only pick up the sound from the external mic that is coming into the mixer to the laptop. it seems to pick up ever

I have a macbook pro in which i use for church recordings. it has a built in mic so like one hole for headphones and mic. how do i get it to only pick up the sound from the external mic that is coming into the mixer to the laptop. it seems to pick up everything, like for example any little movement i make or even just asking the next person a question will get picked up by the internal mic. is there a way i can mute the internal mic so it can only pick the external mic and not every movement im making like chewing etc

I have a macbook pro in which i use for church recordings. it has a built in mic so like one hole for headphones and mic. how do i get it to only pick up the sound from the external mic that is coming into the mixer to the laptop. it seems to pick up everything, like for example any little movement i make or even just asking the next person a question will get picked up by the internal mic. is there a way i can mute the internal mic so it can only pick the external mic and not every movement im making like chewing etc

"Sound Blaster Audigy Fx" and stereo mix availability

If I buy/install the "Sound Blaster Audigy Fx" will it add the stereo mix option to my sound properties, also
does this card work on windows 8?
http://www.bestbuy.com/site/creative...&skuId=3287009

Re: Sound Blaster Xtreme Audio missing Stereo MixK I think I'm having a similar problem with my Windows 7 Professional system.
I'm am getting sound out of my card.
When I right click on the "speaker" icon in the task bar I see the following list of 5 options
Volume Mixer
Playback Devices
Recording Devices
Sounds
Volume Control Options
However when I click on "playback devices", "Recording Devices" and "sounds" nothing comes up.
What I did do is completely uninstall all traces of any installed Creative software and in the device manager did an uninstall for the SB Xtreme Audio Card.
My recording device is the integrated microphone in the Logitech Quickcam/IM that I have installed. If I go to accessories and click on "sound recorder" it doesn't start up either.
The other issue that I see is that when I go into Control Panel and click on Sounds, nothing happens.
Something is definitely going on but I can't seem to track down the cause.

[G50-45] stereo mix and mic

Similar Messages

Maybe you are looking for