G500 amd radeon code 43 problem

I bought a g500 laptop few days ago it came with DOS so i had to install a windows 7 (ultimate) on it but i cant install the graphics driver correctly. There is a drivers CD but i couldnt install every driver from it eg. wifi driver and some others i dont remember which. I looked around the internet and still can figure it out why i cant do it. Little help please.
Solved!
Go to Solution.

i just solved it by myself but in case anyone needs this information about how i did here is it:
i did not installed the newest intel graphics driver and this was the main problem so i deleted it in device manager then also uninstalled the amd radeon driver via uninstaller not with device manager (downloaded the amd driver then i used its uninstall feature) after restart i installed the correct intel graphics driver then the amd radeon driver.

Similar Messages

Lenovo G500 AMD Radeon problem

Hello
My Laptop's specs:
Processor: Intel(R) Core(TM) i3-3110M CPU 2.40GHz
Memory: 4 GB RAM
DirectX Version: DirectX 11
Video Card 1:Intel(R) HD Graphics 4000
Video Card 2:AMD Radeon HD 8570M
So I wanted to play Mafia 2, set the maximum graphics settings
and the test of performance of the game shown running Intel HD graphics and showed 12 fps
.I read that it supposse to switch automaticly to the AMD .
What am i doing wrong?

I have install this AMD System monitor to watch if the Auto switching is working http://support.amd.com/en-us/kb-articles/Pages/AMDSystemMonitor.aspx
And it shows that my AMD Radeon works, but game is still working with low fps

AMD Radeon HD 6550m Problem

Hi
I recently re-installed Windows 7 because my laptop was running slow. when the installation was done, i made sure to update windows to the latest update. When i was going to play skyrim again, it automatically detected it's graphics settings to low, which got me to wonder. Before it always set it to high automatically.
The hardware spesifications on the laptop when i bought it said it had a AMD Radeon HD 6550m 1GB DDR3 graphics card, but now it's only the standard VGA graphics, not sure if this has anything to say, and Intel HD graphics that works.
I've tried to install the AMD Catalyst drivers, but the installation failed. i believe it's the wrong graphics card then. I can't find any drivers for the one i believe to have installed.
My laptop model is HP Pavilion dv6-3300ev
I hope you can help me find a solution!

Sorry for the necrophilia of an old post, as I assume you may have resolved your issue yourself, but here is a soltuoin that worked for me on a similar setup (Pavillion g6-2215tx)
Due to the graphics setup being different, AMD reference graphics drivers will not support your graphics setup, however, 3rd party groups have made drivers that cover these setups:
http://leshcatlabs.net/
Go here to use the very latest Intel and AMD graphics drivers. They use reference drivers with minor modifications to enable them to dynamically switch with full support (and statically switch as well for machines that support it).
Follow the instructions, and your drivers will be installed correctly.

Msi GX60 (AMD Radeon 7970M Graphics PROBLEM)

Ok so I got this laptop as a gift awhile back. Ever since I have never been able to get the dedicated graphics working. The Radeon HD 7970M. I've tried disabling the integrated and the screen kinda glitches up and freezes so I just turned it off and when it was turning off it decides to configure windows (believe this happens everytime i disable it). When I turn it back on I get this amd driver error called "Graphics" and this is what it says, "No AMD graphics driver is installed, or the AMD driver is not functioning. Please install the AMD driver appropriate for your AMD hardware." I have tried doing this many many times, uninstalling and reinstalling different drivers for it and it still does not want to work. Whenever I disable the integrated the dedicate also shows this little yellow triangle in device manager. I heard the specs on the msi GX60 are pretty nice and I'd really love to use it's power, i'd very very VERY much appreciate the help! it would mean everything to me.
Oh and one more thing, in device manager when I right click on it and go to properties it says this under "Device status" Windows has stopped this device because it has reported problems. (Code 43)
I'll be on all day checking this thread, I am definitely capable of giving more information if needed! i'll just need some directions

oh and ever since i got the computer brand new, windows update will not work.
"Downloading updates..."
"Downloading 62 updates (0 KB total, 0% complete)
and it stays like this. yes I have connection to the internet, everything else can connect.
maybe it has something to do with the graphics card problem i'm having?

On Boot Camp, the AMD Radeon R9 M295X is reporting "Code 43" Problems.

I am on an iMac with Retina 5K display and in the latest build 9926, my graphics card is having problems. In the Device Manager the "AMD Radeon R9 M295X" is saying "Code 43: Windows has stopped this device because it has reported problems."
There has been no updates for this in Windows Updates.
I have installed the Boot Camp Support Software, but this did not fix the problem.
My graphics card worked perfectly in Build 9879.

Hi,
In my opinion, since system threw the error message: "Code 43: Windows has stopped this device because it has reported problems." There is two possible reason of this problem:
1. Driver compatibility problem, however, it's hard to make troubleshoot and fix this problem.
2. Driver installed problem, we can resolve this problem by uninstall the problematic driver and reinstall a new version. You can follow the steps of the link below to reinstall the driver:
https://technet.microsoft.com/en-us/library/cc725873(v=ws.10).aspx
In addition, it would be better to use driver verifier to check current graphic card driver compatibility.
https://msdn.microsoft.com/en-us/library/windows/hardware/ff545448(v=vs.85).aspx
Roger Lu
TechNet Community Support

I cant install drivers for AMD Radeon HD 8750 M on a G500 i7-3612QM CPU@2.1Ghz Lenovo.

Hi.
I bought recently a Lenovo G500 i7-3612QM [email protected],
4GB ram,
Windows 7 Ultimate,
Service pack 1,
64-bit Operating System and
AMD Radeon HD 8750M graphics Card.
I follwed many of the discussions for this card but without results.
I unistalled from device manager the card driver.
I unistalled all the previous ATI and AMD installations and
then I installed again avga110w7 driver.
But allways with the same message at the device manager "Windows has stopped this device because it has reported problems. (Code 43)".
Now the laptop works with Standard VGA Graphics adapter.
What can I do for make work the card?
Why is it so difficult?
Can anybody help me?
Thank you.
John.

Hi John,
As the application is not using the GPU, I suggest you to uninstall AMD Driver under Device Manager and make sure to put a check on the prompt asking to delete driver software. Then Check under Control Panel / Programs and Features / Uninstall any Catalyst or AMD Graphics Components.
Now install the AMD driver in the computer and then check if the same is displayed in the Device Manager, below is the link to download the driver. Then add the application using the catalyst control center as displayed in the below image.
AMD Video Driver for Windows 7 (32-bit, 64-bit)
Spoiler (Highlight to read)
Hope this helps!!!
Do post us back if the issue still persists.
Best Regards
Shiva Kumar
Did someone help you today? Press the star on the left to thank them with a Kudo!
If you find a post helpful and it answers your question, please mark it as an "Accepted Solution"! This will help the rest of the Community with similar issues identify the verified solution and benefit from it.
Follow @LenovoForums on Twitter!

Code 43 with AMD Radeon HD 7600G

I am suddenly unable to send graphics to a projector. I use a Pavilion laptop with Window 8.1. The graphic card is AMD Radeon HD 7600 G. Window tells me that it has stopped that device because of code 43. I tried to uninstall and reinstall the software but it made no difference. What can I do?

Hello ClaudeH,
Welcome to the HP Forums!
I understand the AMD device is experiencing a code 43 error in Device Manager. First, please provide the model number of your computer. If you require assistance locating this information, please reference this website: Guide to finding your product number
As well, please try the troubleshooting in this Microsoft document: Error codes in Device Manager in Windows
This document prompts you to run Microsoft Fix it when you load the page. I would do this, as it will probably resolve the issue. If not, the steps provided for code 43 should suffice.
There is another Microsoft document dedicated to this error. Please look at this as well: Code 43: Windows has stopped this device because it has reported problems
Thanks!
Mario
I worked on behalf of HP.

G500 dedicated AMD Radeon card missing in device manager

Greetings to all,
I've got Lenovo G500 laptop (i5, 6GB RAM, Intel HD4000 + ATI Radeon 8750HD, Win 8.1) and I am experiencing a serious problem. Yesterday my laptop suddenly freezed during watching a TV show and I was forced to restart it. After restart I received a message, that AMD Catalyst and hydravision doesn't work properly and I should reinstall drivers. So I did but after that, nothing worked properly and my radeon card was missing in device manager, just intel HD was present. I've read throughout this whole forum and I couldn't find a solution; I've tried everything, reinstallation of all drivers, both AMD and Intel, I've tried installation of older drivers, then newer, I've tried to check BIOS, where it all seemed all right (switchable graphics were enabled) and as last option I've reinstalled whole system - back to the factory settings. But my AMD Radeon card is still not present in the system, it seems like it was not ever there. I've tried to find it via that app which finds any hardware, but without any positive result. When I try to run catalyst center, it says "can't run catalyst, no actual settings which could be configured by catalyst control center". I've tried to play various games (far cry 3, mass effect 2, metro redux) with positive outcome, it runs the same way as it did before, but!! - I've got this feeling it always ran on intel hd card...As many others, since the beginning of my laptop purchase I had that problem where everything runs on integrated card instead on the dedicated, but I did not pay much attention to it, since it worked smoothly anyway. I'm not hardcore gamer, or a gamer at all anyway.....so to sum everything up, I think my radeon card is burned or damaged somehow and it didn't work since the very beginning. But still, I would love to get more professional opinion, because it is simply weird, it is missing in device manager. And one more thing, everytime I close the screen end reopen it later, system freezes or something doesn't work or some other inconvenience, leading to forced restart of the system. I thought it's caused by Win 8, because, honestly, that system sucks, but right now I think it's got something to do with that video card problem.
Thanks in advance and have a nice day ;-)

The NIC is defective... As far as Windows is concerned there is no NIC so the driver will not install.
Motherboard replacement is a bit extreme for just a broken NIC. Its possible to get a USB to Ethernet cable:
http://www.amazon.co.uk/dp/B00484IEJS/ref=pd_lpo_sbs_dp_ss_1/276-0277278-5353446?pf_rd_m=A3P5ROKL5A1OLE&pf_rd_s=lpo-top-stripe&pf_rd_r=1MVJEEYPJ5HJ9KP016WC&pf_rd_t=201&pf_rd_p=569136327&pf_rd_i=B006R665RS

Hello I have imac (27-inch mid 2011) 3.1ghz intel core i5 1tb serial ata hard drive, amd radeon hd 6970m my problem is imac works fine in safe mode,but when you try to startup normal it's connstantly restart by it self.

hello I have imac (27-inch mid 2011) 3.1ghz intel core i5 1tb serial ata hard drive, amd radeon hd 6970m
my problem is
imac works fine in safe mode,
but when you try to startup normal it's connstantly restart by it self.

in safe mode works perfectly,soon as I try to boot in normal mode it's keep restarting.on screen I don't see any line vertical or horizontal picture look normal on safe mode.but unable to start normal it just restarting over and over.I try another HDD but same things happen,I replace memory but still same.works ok in safe mode but not in normal mode.I will try to post system error report.

Problems connecting 1 monitor and 1 TV to 2gb DDR3 AMD Radeon 7570 video card.

I recently purchased an Hp h8-1360t computer with a 2gb DDR3 AMD Radeon 7570 video card and an Hp 2711 LED monitor. I am having problems connecting both the monitor (dvi) and a 50" Sony LCD TV (hdmi) with a 50' hdmi cable. When starting the computer, once the initial Win 7 boot up is finished, the monitor screen goes blank, except for the mouse pointer. When I turn on the tv and select the correct input source a normal Win 7 screen with icons appears on the tv. Only the wallpaper picture displays on the monitor and no icons. If play a dvd movie it will only show up on the tv with the sound coming from the speakers attached to the computer.
I would like to retain control of the computer using the monitor. I tried to set the monitor up as the primary display source using the monitor configuration menu,but it won't allow me to save the dvi connection as the primary display source. The documentation that came with the computer and what I was able to find on the Hp site is lacking....to say the least.
Any assistance with this problem will be greatly appreciated.
Thanks,
Tony

First I would disconnect the TV HDMI cable from the computer. That should return the PC screen to normal. May have to reboot to get normal. Then reconnect the TV HDMI and go into the screen setup routine, paying attention to which screen is supposed to display what information.
{---------- Please click the "Thumbs Up" to say thanks for helping.
Please click "Accept As Solution" if my help has solved your problem. ----------}
This is a user supported forum. I am a volunteer and I do not work for HP.

Problem in Graphic Driver AMD Radeon HD 7670M

Hi Guys ,
i'm new Here ,i had Hp Pavilion G6 2332se ,it has AMD Radeon HD 7670M ,i tried to update it but this was the result
please help me ,how to solve this problem ?

Hi @AhmedZizo ,
Welcome to the HP Forums!
It is a dynamite place to find answers and suggestions!
For you to have the best experience in the HP forum I would like to direct your attention to the HP Forums Guide Learn How to Post and More
I grasp that you are having a difficulty installing an AMD driver as you have switchable graphics.
You provided your model but when I checked the specification page it came with Free Dos. What Operating System are your running?
Here are two documents to assist you with this difficulty.
Overview of Switchable Graphics or Dual GPUs
HP Notebook PCs - Switchable Graphics on Notebooks Configured with Intel and ATI GPUs
I am unsure of where you obtained the driver update, but you should only use the recommended ones from HP .
Here is a link to the HP Pavilion g6-2332se Notebook PC Drivers. You will need to select the correct Operating System and follow the prompts to display all the recommended drivers for you.
You may also consider contacting HP support for further assistance.
Please call our technical support at 800 474 6836. If you live outside the US/Canada Region, please click the link below to get a support number for your region.
World Wide Phone Support
Good Luck!
Sparkles1
I work on behalf of HP
Please click “Accept as Solution ” if you feel my post solved your issue, it will help others find the solution.
Click the “Kudos, Thumbs Up" on the bottom right to say “Thanks” for helping!

Any problem with AMD Radeon or FirePro graphic cards?

Hi.
I know that Adobe recommend Nvidia cards for SpeedGrade, but I ask to owners of AMD cards if they have found any problems with AMD cards: bad performance, not realtime with relatively few layers, etc, etc
Which is your experience?
Thanks.

FWIW: I'm using a AMD Radeon HD 6750M (1GB RAM) on my Mac Book Pro. So far it performs fine, in some cases it even feels faster than the Quadro 4000 in my Mac Pro, but I think that has more to do with the type of projects. Mostly doing DSLR on the MBP and R3D on the Mac Pro.

AMD RADEON GRAPICHS HD 8750M PROBLEM

Hey, last week i just bought a new laptop , Lenovo G510. I installed windows 7 (32 bit) and everything works fine , excepts my graphic cip (AMD RADEON GRAPHICS 8750M). In DXDIAG menu it says my graphic cip is Intel(R) HD Graphics 4600. And when i try to entry in Graphics Proprietis it says I need to install framework net 4.0 but i cant , it givs me a error. Can u guys give me a website or something where i can download my graphic cip ? Games are working horrible , i mean some games that i had install need at least a pentium 2.5 ghz processor and i have I5 and this graphic cip and they are working horrible , if someone could help me I would appreciate it. Thanks

I couldn't message you (frztbyte99) some problems appears and here the message
Hello friend .....
I have AMD Radeon HD 7690M XT (2 GB DDR5 dedicated)
my current driver is 2011-11-18 version 8.882.2.3000
is very old
and never update it or there is no update has come since I bought the notebook
when I installed 14.4 version and after restart .... this message comes
how do you update to13.12 driver version ???????

AMD Radeon HD 6750M, Early 2011 MBP, 10.9.4 Problems

Hello,
Ever since 10.9.3 update I have a serious problem with my Early 2011 MBP with AMD Radeon HD 6750M card.
First my configuration:
MBP 2.2 GHz Intel Core i7 (Macbook Pro 8,2)
16 GB RAM
512 GB Sandisk SSD and 750 Stock HDD
AMD Radeon HD 6750M and Intel HD Graphics 3000
OS X 10.9.4
I'm usually using my MBP with external display with a resolution of 1920x1080. The display is connected via DVI to Mini Display Port adapter. When I connect the external display, my MBP switches to the AMD card. Here's where the problems begin. If I'm using Davinci Resolve, Capture One Pro or any other software (that I use regularly) that uses the GPU extensively, the cpu usage will rise, the computer will start to feel sluggish and my productivity almost becomes none because even the simplest tasks such as opening another tab in firefox or safari takes anywhere between 1-3 sec. When the computer starts doing that, I cannot play a simple HD video at native fps and the whole machine basically becomes too expensive paper weight. The strange thing is that even after I quit all programs, the system cpu usage continues to be high, around 50% with kernel_task being the star using all this cpu and it keeps using all of this cpu forever, at least until i shut it down or disconnect the external display and manage to make it switch to the internal Intel gpu.
The problem started after istalling the 10.9.3 update and it's still there with the 10.9.4 update. I even formatted the computer and reinstalled everything but the problem still persists.
I haven't experienced anything like this on 10.9.2 and the machine was actually quite fast before that. Now, I have too expensive paper weight on my desk.
Since the problem is very specific, I doubt many users will complain and I doubt Apple will ever do anything to fix it, at least until hopefully the new drivers in 10.10 fix the issue hopefully.
My question is:
1. Has anyone else experienced this and managed to solve the problem?
2. How can I downgrade to 10.9.2? I don't have time machine backup but i have bootable usb with 10.9.2. Will it help?
All best,
Goran

When you have the problem, note the exact time: hour, minute, second.
These instructions must be carried out as an administrator. If you have only one user account, you are the administrator.
☞ Launch the Console application in any of the following ways:
☞ Enter the first few letters of its name into a Spotlight search. Select it in the results (it should be at the top.)
☞ In the Finder, select Go ▹ Utilities from the menu bar, or press the key combination shift-command-U. The application is in the folder that opens.
Open LaunchPad. Click Utilities, then Console in the icon grid.
The title of the Console window should be All Messages. If it isn't, select
          SYSTEM LOG QUERIES ▹ All Messages
from the log list on the left. If you don't see that list, select
          View ▹ Show Log List
from the menu bar at the top of the screen.
Each message in the log begins with the date and time when it was entered. Scroll back to the time you noted above. Select the messages entered from then until the end of the episode, or until they start to repeat, whichever comes first. Copy the messages to the Clipboard by pressing the key combination command-C. Paste into a reply to this message by pressing command-V.
The log contains a vast amount of information, almost all of it useless for solving any particular problem. When posting a log extract, be selective. A few dozen lines are almost always more than enough.
Please don't indiscriminately dump thousands of lines from the log into this discussion.
Please don't post screenshots of log messages—post the text.
Some private information, such as your name, may appear in the log. Anonymize before posting.

Problem with amd radeon hd 7600M in windows 7

I recently purchased a dell inspiron 15 3521 with intel hd 4000 nd amd radeon hd 7600M. The problem is when i play any high graphics game, a continous strem of hoizontal lines appear on the screen from top to bottom. Also i am not able to get
the catalyst control center options in the pull down menu. In addition to that, the real radeon driver installed is 7600M series. But when i check online, it says 7670M series /
Does anyone have any solutions regarding above ?

Hi,
Just as it is mentioned in the post, playing a high graphics game calls for high performance graphics card, I suggest to go to the official site of this game for detail information.
Besides, I suggest to download and install the newest driver from AMD official site and check the result:
http://support.amd.com/en-us/download/desktop?os=Windows+7+-+64#amd-catalyst-packages
Regards
Wade Liu
TechNet Community Support

G500 amd radeon code 43 problem

Similar Messages

Maybe you are looking for