G500 win8.1 window updates failing to install.

I recently purchased a Lenovo G500 in France (intel I7 2.2 ghz, 4gb ram, 500gb) with Windows 8.1 as the OS, and just got the Internet back last wednesday, so April 30th.
Since then, I've had a total 3 microsoft updates, which in and of itself is not terribly interesting, except that two of these three updates have failed, leading to the following message:
"Failure configuring Windows updates. Reverting changes. Do not turn off your computer"
Obviously in French, but that's the translation I got anyway.
So here's my question: How often does this happen? Microsoft's site tells me to wait for about 30 minutes while it resolves, but the first time it took me close to an hour (and after the 3rd restart after it showed me this, I manually turned it off after it shut down and then it installed properly). The second update worked fine and I had no problems (albeit it took well over 30 minutes to install though), yet the third (this morning) also failed to install (but this time it took less than 30 minutes, although I noticed it froze on the lenovo screen after a restart, where the "loading" circles didn't show up, although I don't know after which restarted this occurred, as I had left it to run its course while I ate breakfast).
Now that I think about it, the first update error occurred after a system error which required a restart (cause unkown, some kind of error along the lines of 0x0000000A, but I found nothing I I'm guessing I didn't see correctly), and last night I noticed my laptop had frozen when I close it, so I manually shut it down. Coincidence? The second update worked fine, and it was the only time I had maually selected restart and update, so this could be a plausible theory, although I have no idea why it froze last night. Maybe I closed it too quickly after closing chrome (although I have no idea why this would cause a freeze...).
So my questions are as follow: Has this happened to any win 8.1 users, are your updates abnormally long (well over 10 minutes), do they occurr extremely frequently (every 2-3 days, if not every day), and what could the causes be for the failure to install/reverting changes issue?
Thank you in advance for any help.

There are lots of possible reasons. Other programs interfering, insufficient permissions, AV blocking, – the list is endless.
I could say do a forum seach but that facility is as useless as the Adobe installers.
Have a look here: http://kb2.adobe.com/cps/408/kb408524.html

Similar Messages

Windows updates fail to install

Every update other than Windows Defender definition updates starting with November 18 has failed to install in Windows 8-64. Since this is on more than one installation it is a systemic Windows 8 problem as far as I am concerned. I cannot be the
only in reality beta tester of this problematic (I am seeing program/driver incompatibility issues and IE 10 has very serious flaws) OS seeing this issue. I have tried installing them individually only to see each update fail to install. On rebooting
Win 8 insists on installing any of the updates, generally fails at about 15% and has to reset and reboot. The installation fix wizard works about as well any similar applet from Microsoft which is to say not at all. Apart from "refresh" or re-install, both
non-starters for an OS that is barely a month old, what solutions are there? As noted I see program/driver issues (try running CS6 with a Radeon video card) and wonder if that is part of the problem.

Hi,
to see the cause of Windows 8 update failures, we must look for error messages in the following log files:
Please run the Windows Explorer and go to the folder "C:\Windows\Logs\CBS\" and copy all files to your document folder, also copy the setupapi.dev.log from the folder C:\Windows\Inf, the "C:\Windows\WindowsUpdate.log" and the file "C:\Windows\winsxs\poqexec.log"
to your document folder (otherwise you can't upload it), zip all files into 1 ZIP and upload the zip to your SkyDrive [1] and post a link here.
André
[1] http://social.technet.microsoft.com/Forums/en-US/w7itproui/thread/4fc10639-02db-4665-993a-08d865088d65
"A programmer is just a tool which converts caffeine into code"

Windows update fails to install graphic driver

Hello everyone,
I have a problem, I recently installed Windows 10 Technical build 9926.
Windows update shows me that there is a update available for my Nvidia geforce GT 520 M card.
If I install the driver the installation fails. I have tried this for a couple of times but the problem stays.
Does anyone have a solution for this problem.
My System specifications are:
Windows 10 Technical preview build 9926 ( upgrade from windows 8.1 via windows update)
RAM: 6 GB
CPU: Intel Core i5 2430M
GPU: Nvidia geforce GT 520M

For what it's worth, as a rule, I NEVER install the video drivers offered via Windows Update. They have always been bad news for me. Case in point: I just upgraded my Dell Optiplex 9030 AiO to the Win 10 Ent Preview Build 9926. This PC has an AMD Radeon
R7 M265 video chipset in it, and the system automatically went to Windows Update to get the driver for it. As soon as the driver activated, the screen went blank and stayed that way. The only way to fix it was to roll back the the driver installation
with System Restore. When the PC rebooted, I unplugged the network cable so it couldn't attempt to install the flaky driver again. I downloaded the latest drivers from AMD directly and installed them. That fixed the problem.
So, my advice to you is to use the latest Windows 8/8.1 drivers for your card from the manufacturer's website. DO NOT USE VIDEO DRIVERS THAT ARE OFFERED VIA WINDOWS UPDATE. Other hardware drivers are usually okay, but the video drivers always seem to
be whacked in some way.
Jeff R.

Intel 3000 Graphics driver from windows update failing to install. Error 800F0244

Hi all, So an update has come through windows update for my embedded graphics which is an Intel HD 3000. Problem is the update keeps failing. Tried restarting and nothing changed. I ended up jumping on to the Windows Forums and seems like this problem has just started to pop up for quite alot of users and no solution yet. This is what the windows website says for the Error : SPAPI_E_SIGNATURE_OSATTRIBUTE_MISMATCH0x800F0244 The software was tested for compliance with Windows Logo requirements on a different version of Windows, and may not be compatible with this version. So was wondering if anyone else had this problem and if anyone found a solution?

Hi Everyone , So after a few minutes of digging around this is what I found. This is the driver version that is failing for intel HD 3000. ( 9.17.10.4229 ) So I thought I'd check the driver on the Intel site, to see if it was the latest, which it was .. (9.17.10.4229) And this is the driver currently installed for my HD 3000... and as noted its ( 9.17.10.4229 ) SO its seems this problm is a windows update issue and the most current driver is available through intels website. No need to stress, jump onto the intel downloads page and download the latest one if you havent already, This is a link to the 32Bit Driver https://downloadcenter.intel.com/download/24970/Intel-HD-Graphics-Driver-for-Windows-7-8-8-1-32bit Heres the link for the 64Bit https://downloadcenter.intel.com/download/24971/Intel-HD-Graphics-Driver-for-Windows-7-8-64-bit As for the windows update one, hide that update as clearly something isnt right and surely MS will patch it soon enough! Hoped this helped

Windows updates fail to install and revert

Good afternoon,
I've been having problems updating Windows. It will download them and install but at the end it reverts back. It has not been installing most updates. How do I manually install the ones I am missing - sporadic updates since Dec 14.
Thanks,
Russ

Hi，
We hope your issue has been resolved.
Since some required information are needed for us to help you.
Have your made any action after this issue occurred?
Before you provide any error code or log information please kindly follow the general troubleshooting steps as mentioned below.
https://support.microsoft.com/en-us/gp/windows-update-issues/en-us
If this issue still persist, you could provide windows update.log and CBS.log information.
1. If you concern personal information or company related information in logs, we recommend to send log files to our forum email account: [email protected]
2. For dump file or other logs which do not contain the sensitive information, you can still use OneDrive to share them so that other community members can also provide help in analysis.
Regards
D. Wu
Please remember to mark the replies as answers if they help, and unmark the answers if they provide no help. If you have feedback for TechNet Support, contact [email protected]

Windows update fails to install windows update KB3038314 x64 for windows 7 x64 for ie 11 update april 14 2015.

hi
i know ms is trying to fix the issue with this update for ie 11 but when will this be as this is leave my computer open to hackers etc when will this be be resolved

Hi,
Could you let us know what's exact error message when you attempt to install this update?
And then I would like to suggest you refer to this guide to troubleshoot firstly:
You can't install updates in Windows Vista, Windows 7, Windows Server 2008, or Windows Server 2008 R2
https://support.microsoft.com/en-us/kb/2509997
Please remember to mark the replies as answers if they help, and unmark the answers if they provide no help. If you have feedback for TechNet Support, contact [email protected]

After an iTunes update failed to install iTunes won't open and I get lthe folloowing error messages. Program can't start because MSVCR80.dll is missing, and iTunes not installed correctly. please reinstall iTunes. Error 7( windows errpr 126)

After an iTunes update failed to install, iTunes won't open and I get the following two windows. Program can't start because MSVCR80.dll is missing from your computer, and iTunes not installed correctly. Please reinstall iTunes. Error 7 (windows error 126) When I reinstall I get the same messages and ITunes won't open.

Click here and follow the instructions.
(98815)

Bought a new iMac 27" yesterday. Attempting to download Adobe Creative Suite 5 Design Premium. Loaded software from discs. When I check for updates they fail to install. A window comes up saying "Some updates failed to install." Then under each applicati

I bought a new iMac 27" yesterday, running with Mavericks OS. Attempting to download Adobe Creative Suite 5 Design Premium. Loaded software from discs. When I check for updates they fail to install. A window comes up saying "Some updates failed to install." Then under each applications it says "There was an error downloading this update. Please quit and try again later." Have done this several times. Suggestions?

update manually,: http://www.adobe.com/downloads/updates/

Windows 7 updates fail to install

i've running the microsoft fix updates tool more than 30 times , the computer takes more than a hour on configuring updates and at the end the updates fail to install , my computer has the last antivirus and mcafee security tools , I create the restore cd s for my laptop the computer ask for 3 dvd's . and when I run the discs are empty im frustrating with microsoft and who created the tool for make recovery cds my laptop is a vgn-ns325j and the mensajes what give me the windows tool :service registration is missing or corruptwindows update error 0x80070490problems installing recent updates

Hi,
You can also run Windows Troubleshooter, disable your antivirus and firewall temporarily, perform
clean boot for a test.
http://windows.microsoft.com/en-US/windows7/Open-the-Windows-Update-troubleshooter
Best Regards,
Niki
Please remember to click "Mark as Answer" on the post that helps you, and to click "Unmark as Answer" if a marked post does not actually answer your question. This can be beneficial to other community members reading the thread.

Windows updates won't install

Hello,
I have a remote user whose Windows updates won't install. He has a Dell laptop with Windows 7 Pro 32-bit. You can bring up the update windows and start the install but, at exactly 10 seconds, it just says "Updates failed" and doesn't really give
any more information.
I saw the Windows update service was stopped, I started it and that didn't seem to help. I also tried the update troubleshooter and that didn't do anything. I checked for malware and didn't find any, and he has plenty of disk space. I didn't see
anything in Even Viewer or Reliability Monitor either.
What could it be?
Thanks.
Chris Hansen

Hi Chris,
Firstly, please check if those Windows Update have already installed:
1. Open Windows Update by clicking the Start button. In the search box, type
Update, and then, in the list of results, click Windows Update.
2.In the left pane, click View update history.
3. Click Installed Updates at the top of the page, there check if any Windows Update installed recently.
If there is no any Windows Update installed, try to
reset the Windows Update component to check if it could resolve the issue.
Karen Hu
TechNet Community Support

Windows Updates won't install - Error 0x80072EFD

Question
Windows Updates won’t install. I’m receiving Error 0x80072EFD. What can I do to solve this?
Answer
This particular error means that your computer was not able to connect to the Internet when it tried to install updates. First, check your Internet connection and then try again. If that doesn’t work, try the methods below.
Method A: Make sure that Windows Firewall is turned on, and temporarily disable third-party firewalls
Warning This workaround may make a computer or a network more vulnerable to attack by malicious users or by malicious software such as viruses. We do not recommend this workaround but are providing this information so that you can implement this workaround at your own discretion. Use this workaround at your own risk.
To complete this method, follow these steps.
Step 1: Make sure that Windows Firewall is turned on
To open Windows Firewall, click the Start button, and then click Control Panel. In the search box, type firewall, and then click Windows Firewall.
Click Turn Windows Firewall on or off.
Click On (recommended), and then click OK.
Step 2: Temporarily disable third-party firewalls
Click the Start button, click Control Panel, and then, under System and Security, click Review your computer's status.
Click the arrow button next to Security to expand the section.
Under Firewall, read the firewall status note. This information will indicate which, if any, firewall is installed and whether the firewall is turned on. For example, for ZoneAlarm, the notice will say ZoneAlarm Firewall is currently ON.
Open the third-party firewall application that is listed in the firewall status note, and temporarily disable the firewall. If necessary, refer to the firewall application documentation, or contact the application vendor for more information about how to temporarily disable the application.
Step 3: Try to install the updates again
If this method resolved your issue, follow the steps in Method B, step 2 to re-enable your third-party firewall. You might want to also check for and install any necessary updates to your third-party firewall.
If this method did not resolve your issue, continue with Method B.
Method B: Temporarily disable third-party antivirus software
Warning This workaround may make a computer or a network more vulnerable to attack by malicious users or by malicious software such as viruses. We do not recommend this workaround but are providing this information so that you can implement this workaround at your own discretion. Use this workaround at your own risk.
Note If your third-party firewall is still disabled from Method A, do not open e-mail messages, surf the Web, or use instant messenger at this point.
Step 1: Locate and temporarily disable your third-party antivirus software
Note Windows does not detect all antivirus software, and some antivirus software doesn't report its status to Windows. If your antivirus software is not displayed in Windows Security Center, and you're not sure how to find it, try any of the following:
Look for the antivirus software in the list of programs on the Start menu.
Type the name of the software or the publisher in the Search box on the Start menu.
Look for the software in Action Center:
Click the Start button, click Control Panel, and then, under System and Security, click Review your computer's status.
Click the arrow button next to Security to expand the section.
If Windows can detect your antivirus software, it will be listed under Virus protection.
If the software is turned on, check the Help documentation that was included with the software for information about how to disable it.
Note You may have to look in the application documentation to determine how to do this.
Step 2: Check for Windows Updates
As soon as the antivirus software is temporarily disabled, visit the Windows Update or Microsoft Update site again, and try to download and install updates.
If this method resolved your issue, and you were able to install the updates successfully, you should re-enable your third-party antivirus software.
If this method did not resolve your issue, continue with Method C.
Method C: Disable software accelerator programs
Disable any software accelerator programs that may be running. Some examples of these programs are file download accelerators and Internet speed accelerators.
Note If your third-party firewall is still disabled from Method B, do not open e-mail messages, surf the Web, or use instant messenger at this point.
Step 1: Disable software accelerator programs
To do this, select from the following options:
See the documentation that was included with the program.
View the Help files for your program.
Contact the program vendor. For information about how to contact the program vendor, visit the following Microsoft Web site:
http://support.microsoft.com/gp/vendors
Step 2: Install Updates
As soon as the software accelerator program is disabled, visit the Windows Update or Microsoft Update site again, and try to download and install updates.
If this method resolved your issue, you should enable the software accelerator programs that you disabled in Step 1.
If this method did not resolve your issue, continue with Method E.
Method D: Add the Windows Update Web site and the Microsoft Update Web site to the Trusted Sites list
Note If your third-party firewall is still disabled from Method A, do not open e-mail messages, surf the Web, or use instant messenger at this point.
To add the Windows Update Web site and the Microsoft Update Web site to the Trusted Sites list, follow these steps:
Start Windows Internet Explorer.
On the Tools menu, click Internet Options.
Note If you are using Internet Explorer 7, and the menu is not available, press the ALT key on your keyboard to access the Internet Explorer Menu.
Click the Security tab, and then click Trusted Sites.
Click Sites, and then click to clear the Require server verification (https for all sites in this zone check box.
In the Add this Web site to the zone box, type the following addresses, and then click Add after you type each address:
http://update.microsoft.com
http://windowsupdate.microsoft.com
Click OK two times.
Try to install the updates again.
If this method resolved your issue and you were able to install updates successfully, you should re-enable your third-party firewall if it is still disabled. To do this, see step 2 in Method A.
For more methods and advanced troubleshooting techniques, see You may encounter temporary connection-related errors when you use Windows Update or Microsoft Update to install updates.

Mark, I've just been through this update issue with two installations. In my case, it seemed intertwined with authentification and indexing not working, either. Upon a transfer of my system disk to new hardware I got hit with the issue and couldn't fix it. Which is why I did a clean install of Win7 ultimate 64bit on my T61p. The install (including update) worked great until I ran the intel matrix storage manager update. This broke windows update. If you surf the web, and include "intel rapid storage manager" or "intel matrix storage manager" and "Windows update fails", you'll see that a lot of folks feel that the intel driver (or how windows handles it) is what breaks update. I tracked this down to a driver, iastor.sys, in windows\system32\drivers. I was able to fix my Window Update by copying an iastor.sys from another recently built machine (should be exactly the same, but this was my wife's T510, but still Win 7 Pro 64) to overwrite the iastor.sys that the intel update changed. To be clear: I couldn't get windows update or indexing to work. I overwrote* the "bad" iastor.sys with one that worked on another computer. Rebooted. Update worked. I just wanted to point out that instead of blindly installing updates to fix problems, folks should be aware that sometimes the update is the problem. Especially as these systems are off warranty and the drivers are not being updated. I've asked elsewhere, so let me ask here: Where is the System Interface Driver for t61p? Not listed anywhere on site, links on the web referring to it are all broken. Is the System Interface Driver now part of another driver program? Thanks! Jim T61p, Win 7 Ultimate 64bit, and T510, Win 7 Pro 64bit

Windows Update failed to check for updates with error 0x800B0001

Hi all,
I have a WSUS installed on a Windows Server 2008 R2 box, I have a new Windows Server 2012 box (joined to domain) that cannot get updates from the WSUS, whenever I try to search for new updates I receive the following error in event viewer:
Windows Update failed to check for updates with error 0x800B0001
Note: I cannot see the Win2K12 server in the WSUS console under computers node.

I couldn't get it to run even after installing the mentioned KB fixes. So I investigated the error myself, and found a "hack" that seems to fix the issue. Wrote up a small piece on it here:
http://tplive.azurewebsites.net/2013/12/windows-update-error/
You and about a thousand other people have reported "I had already installed [the update], but installing it AGAIN fixed the problem.", which is almost assuredly a simple indication that the original installation of the update failed, and you simply did
not recognize that the installation of the update was not successful.
The fact that the /selfupdate folder was corrupted (read: missing files) pretty much says it all. There's no bug. Your installation of the update simply failed. (Or, the server wasn't healthy to begin with and you got what you got.)
Bottom line: The only known cause for a client-side 0x800B0001 error code is that the WSUS server has not been
properly and completely patched.
Lawrence Garvin, M.S., MCITP:EA, MCDBA, MCSA
SolarWinds Head Geek
Microsoft MVP - Software Packaging, Deployment & Servicing (2005-2013)
My MVP Profile: http://mvp.microsoft.com/en-us/mvp/Lawrence R Garvin
http://www.solarwinds.com/gotmicrosoft
The views expressed on this post are mine and do not necessarily reflect the views of SolarWinds.

Acrobat XI 11.0.06 update fails during install

acrobat XI 11.0.06 update fails during install. Any advice or help? Here is the installer log contents:
Jan 17 00:32:34 fox.local installd[5955]: PackageKit: ----- Begin install -----
Jan 17 00:33:44 fox.local installd[5955]: PackageKit: Install Failed: Error Domain=PKInstallErrorDomain Code=112 "An error occurred while running scripts from the package “AcrobatUpd11006.pkg”." UserInfo=0x7fb9615c5160 {NSFilePath=./postinstall, NSURL=file://localhost/Volumes/AcrobatUpd11006/AcrobatUpd11006.pkg#payload.pkg, PKInstallPackageIdentifier=com.adobe.acrobat.a11.AcrobatUpd11006, NSLocalizedDescription=An error occurred while running scripts from the package “AcrobatUpd11006.pkg”.} {
        NSFilePath = "./postinstall";
        NSLocalizedDescription = "An error occurred while running scripts from the package \U201cAcrobatUpd11006.pkg\U201d.";
        NSURL = "file://localhost/Volumes/AcrobatUpd11006/AcrobatUpd11006.pkg#payload.pkg";
        PKInstallPackageIdentifier = "com.adobe.acrobat.a11.AcrobatUpd11006";
Jan 17 00:33:44 fox.local Installer[11306]: Install failed: The Installer encountered an error that caused the installation to fail. Contact the software manufacturer for assistance.
Jan 17 00:33:44 fox.local Installer[11306]: Displaying 'Install Failed' UI.
Jan 17 00:33:44 fox.local Installer[11306]: 'Install Failed' UI displayed message:'The Installer encountered an error that caused the installation to fail. Contact the software manufacturer for assistance.'.

You are right. There are a lot more self-support tools available in Windows
than in MacOS. All you ever get on a Mac is "That didn't work: -304998173".
Thanks for your insights.
Re: acrobat XI 11.0.06 update fails during install
created by Bill@VT <http://forums.adobe.com/people/Bill%40VT> in Acrobat
Installation & Update Issues - View the full discussion
<http://forums.adobe.com/message/6040206#6040206>
The upgrade is not the 11.0.06, but that is an update. The upgrade is what
you can purchase if you had a previous version of Acrobat (at least AA 9).
The upgrade is substantially less in price than the full product. With the
upgrade you also have to have the SN of the previous product available for
the install. That is why I asked about the upgrade. Once you install AA XI,
then going to 11.0.06 is a free update (updates are changes in the
sub-version and are done quarterly or when there is a critical security
issue). You can often fix installations by running a repair. In Windows
that is done either from Help>Repair or from the Control Panel. I do not
know the equivalent of the Control panel in the MAC. In any case I am glad
you got it fixed.
Please note that the Adobe Forums do not accept email attachments. If you
want to embed a screen image in your message please visit the thread in the
forum to embed the image at http://forums.adobe.com/message/6040206#6040206
Replies to this message go to everyone subscribed to this thread, not
directly to the person who posted the message. To post a reply, either reply
to this email or visit the message page:
http://forums.adobe.com/message/6040206#6040206 To unsubscribe from this
thread, please visit the message page at
http://forums.adobe.com/message/6040206#6040206. In the Actions box on the
right, click the Stop Email Notifications link. Start a new discussion in
Acrobat Installation & Update Issues at Adobe Community
<http://forums.adobe.com/choose-container!input.jspa?contentType=1&container
Type=14&container=4714> For more information about maintaining your forum
email notifications please go to
http://forums.adobe.com/thread/416458?tstart=0.

2008 r2 Windows update Failed with 8000FFFF

HI
One of our clients has not run windows update in sometime. It was setup for automatic updates so they had never checked their server manually for updates.
We have tried to reset the components using several methods from a whole day of gooling this fix. During the night last night we run scandisk with repair which was mentioned on several other threads.
after resetting the windows update components
When we click install now. it immediately fails with error 8000FFFF
I then opened event viewer to find the log. It lead me to a local file which reads:
Version=1
EventType=WindowsUpdateFailure
EventTime=130463490243270806
Consent=1
ReportIdentifier=a2cac66b-ebcd-11e3-b93e-d4ae52b74067
Response.type=4
Sig[0].Name=ClientVersion
Sig[0].Value=7.5.7601.17514
Sig[1].Name=Win32HResult
Sig[1].Value=8000ffff
Sig[2].Name=UpdateId
Sig[2].Value=174EAAC7-5A3D-448F-BE6F-D6FE450E1DCF
Sig[3].Name=Scenario
Sig[3].Value=Download
Sig[4].Name=SourceId
Sig[4].Value=101
Sig[5].Name=Environment
Sig[5].Value=Unmanaged
DynamicSig[1].Name=OS Version
DynamicSig[1].Value=6.1.7601.2.1.0.1296.17
DynamicSig[2].Name=Locale ID
DynamicSig[2].Value=2057
FriendlyEventName=Windows Update installation problem
ConsentKey=WindowsUpdateFailure
AppName=Host Process for Windows Services
AppPath=C:\Windows\System32\svchost.exe
ReportDescription=A Windows update did not install properly. Sending the following information to Microsoft can help improve the software.
I then googled 174EAAC7-5A3D-448F-BE6F-D6FE450E1DCF and found an article advising me to try and install system update readiness tool which too failed with the 8000FFFF
I have checked for viruses/malware and that seems ok. MS Security essentials is able to download and install updates just fine.
The machine is running IE9. I tried downloading both IE10 & IE11 which say components are required before installing the selected IE and takes me to a web page.
I downloaded all the x64 updates, when i execute they all fail with the 8000FFFF error.
we also tried http://support.microsoft.com/kb/971058/en-us which did not help it failed at the end with:
Can anyone suggest anything that we could do to try and fix this error?

Hi,
Sorry for the delay. According to the log, you get
0x80190194
0x80190194 -2145844844 BG_E_HTTP_ERROR_404
The requested URL does not exist on the server.
Is there any problem with the other computers in the same network? If so, I guess there could be some problem with your network. Confirm this with your proxy server or ISP.
If not please reset windows update component and try again.
How do I reset Windows Update components?
http://support.microsoft.com/kb/971058/en-au
Hope this helps.

Why is creative cloud update failing to install?

I can not use my creative cloud because it keeps trying to install an update and fails. How do I solve this?

I hope I hqad the right fault, please let me know if not.
Naam van toepassing met fout: Creative Cloud.exe, versie: 3.0.0.74,
tijdstempel: 0x553504a0
Naam van module met fout: unknown, versie: 0.0.0.0, tijdstempel: 0x00000000
Uitzonderingscode: 0xc0000005
Foutoffset: 0x00000000
Id van proces met fout: 0x1608
Starttijd van toepassing met fout: 0x01d07e9d4b208f25
Pad naar toepassing met fout: C:\Program Files (x86)\Adobe\Adobe Creative
Cloud\ACC\Creative Cloud.exe
Pad naar module met fout: unknown
Rapport-id: 899e5f6e-ea90-11e4-9933-90fba63425e0
This is earlier:
Naam van toepassing met fout: Creative Cloud.exe, versie: 3.0.0.74,
tijdstempel: 0x553504a0
Naam van module met fout: unknown, versie: 0.0.0.0, tijdstempel: 0x00000000
Uitzonderingscode: 0xc0000005
Foutoffset: 0x00000000
Id van proces met fout: 0x1210
Starttijd van toepassing met fout: 0x01d07e9ceda6f7c2
Pad naar toepassing met fout: C:\Program Files (x86)\Adobe\Adobe Creative
Cloud\ACC\Creative Cloud.exe
Pad naar module met fout: unknown
This is earlier:
Naam van toepassing met fout: Creative Cloud.exe, versie: 3.0.0.74,
tijdstempel: 0x553504a0
Naam van module met fout: unknown, versie: 0.0.0.0, tijdstempel: 0x00000000
Uitzonderingscode: 0xc0000005
Foutoffset: 0x00000000
Id van proces met fout: 0x6f0
Starttijd van toepassing met fout: 0x01d07e9c70de8b54
Pad naar toepassing met fout: C:\Program Files (x86)\Adobe\Adobe Creative
Cloud\ACC\Creative Cloud.exe
Pad naar module met fout: unknown
This is earlier:
De sessie ReadyBoot is beëindigd door de volgende fout: 0xC0000188
Tis is earlier:
De maximale bestandsgrootte voor de sessie ReadyBoot is bereikt. Het is
daardoor mogelijk dat gebeurtenissen verloren gaan (niet worden
geregistreerd) in het bestand C:\Windows\Prefetch\ReadyBoot\ReadyBoot.etl.
De maximale bestandsgrootte is momenteel ingesteld op 20971520 bytes.
This is earlier:
Naam van toepassing met fout: Creative Cloud.exe, versie: 3.0.0.74,
tijdstempel: 0x553504a0
Naam van module met fout: unknown, versie: 0.0.0.0, tijdstempel: 0x00000000
Uitzonderingscode: 0xc0000005
Foutoffset: 0x00000000
Id van proces met fout: 0xf98
Starttijd van toepassing met fout: 0x01d07e97f6a03cb9
Pad naar toepassing met fout: C:\Program Files (x86)\Adobe\Adobe Creative
Cloud\ACC\Creative Cloud.exe
Pad naar module met fout: unknown
This is earlier:
Naam van toepassing met fout: Creative Cloud.exe, versie: 3.0.0.74,
tijdstempel: 0x553504a0
Naam van module met fout: unknown, versie: 0.0.0.0, tijdstempel: 0x00000000
Uitzonderingscode: 0xc0000005
Foutoffset: 0x00000000
Id van proces met fout: 0xcc8
Starttijd van toepassing met fout: 0x01d07e979229c174
Pad naar toepassing met fout: C:\Program Files (x86)\Adobe\Adobe Creative
Cloud\ACC\Creative Cloud.exe
Pad naar module met fout: unknown
Do you need more? Please tell me.
I hope you can understand. It's Dutch.
2015-04-24 18:58 GMT+02:00 Brucgovn <[email protected]>:
Why is creative cloud update failing to install? created by Brucgovn
<https://forums.adobe.com/people/Brucgovn> in *Creative Cloud Download &
Install* - View the full discussion
<https://forums.adobe.com/message/7475697#7475697>

G500 win8.1 window updates failing to install.

Similar Messages

Maybe you are looking for